product catalog10 product catalog it lbe systeatic lbication inc model #9003l for three inch i-beam...

PRODUCT C ATA LO G

CONVEYOR MAINTENANCE SOLUTIONS» Conveyor Chain Lubrication » Lubricants & Greases» Brush Cleaners » Conveyor MonitoringW W W . M I G H T Y L U B E . C O M

1

TABLE OF CONTENTS 2 AnIntroductiontoMightyLubeEquipment

4 CONVEYOR CHAIN LUBRICATION 4 Self-ContainedEnclosedTrackConveyorLubricators 5 Self-ContainedI-BeamConveyorLubricators 6 Self-ContainedPowerandFreeConveyorLubricators 7 SealedWheelGreaser 8 CentralSystemEnclosedTrackConveyorLubricators 9 CentralSystemInvertedSquareTubeConveyorLubricators 10 CentralSystemI-BeamConveyorLubricators 11 CentralSystemInvertedI-BeamConveyorLubricators 12 CentralSystemPowerandFreeConveyorLubricators 13 CentralSystemFreeCarrierLubricators 13 CaterpillarDriveChainLubricators 14 CentralSystemIn-FloorConveyorLubricators 15 CentralSystemPanandScrapConveyorLubricators CentralSystemRollerChainLubricators 16 CentralSystemPumpingReservoirandPowerSupply

17 CONVEYOR LUBRICANTS & GREASES 17 ThinFilmConveyorLubricants 20 HigherViscosityConveyorLubricants 21 ConveyorGreases

22 CONVEYOR BRUSH CLEANERS 22 I-BeamConveyorBrushCleaningSystems 23 PowerandNon-PowerBrushCleaningSystems 24 EnclosedTrackConveyorBrushCleaningSystems 25 OtherConveyorBrushCleaningSystems

26 CONVEYOR MONITORING 26 ConveyorMonitoringSystem 30 Permanent/MultiLineMonitoringSystem 32 PortableMonitoringSystem 34 SingleLineMonitoringSystem 36 PaintMarkerforMonitoringSystem

MIGHTY LUBE® is a registered trademark of MIGHTY LUBE® Systematic Lubrication, Inc | Copyright© 2017 All rights reserved v3 2017 - This manual supersedes all previous versions. The information contained in this manual is subject to change without notice.

2 PRODUCT CATALOG | MIGHTY LUBE SYSTEMATIC LUBRICATION, INC

AnIntroductiontoMIGHTYLUBEEQUIPMENTMIGHTY LUBE has over thirty years of field engineering and service experience resulting in the most technically advanced and highest quality conveyor monitoring and lubrication systems available to the industry.

Mighty Lube’s microprocessor controls and high quality lubricants assure manyyearsof trouble freeoperationand thebestprotectionagainstdowntimeofyourconveyorsystems.Mighty LubeoffersbothCentralizedSystemsandSelf-ContainedLubricatorswithmodelsavailableformosttypesofconveyors.

WithMighty Lube’s microprocessor controls, the lubricators can be set up andprogrammedtolubricatechainpins,opentrolleys,caterpillardrives,andturnbearings.Easilyprogrammed to apply the right amountof lubricant, these lubricators allowprecise control, assuringproper lubricationwhile reducingproduct contamination.The E-Prommemory assures that the lubricatorwill retain the specified programevenintheeventofapowerfailure.

Mighty Lube’s Self-Contained Conveyor Lubricatorsrequireonlya120VACpowersource,noairpressure isneeded.Theunitscomepre-mountedonamodifiedrailsectionrequiringminimaldowntimeforinstallation.

The installation of a Mighty Lube Central Reservoir Lubrication System isrecommendedwheremultipleconveyorsareinproximitytoeachother.Liketheselfcontainedunits,thelubricatingheadsarepre-mountedforeaseofinstallation.Thecentralreservoirsystemiseasilyexpandable,animportantfactorwhenconsideringfutureexpansion.

Mighty Lubealsoproducesacomplete lineofConveyor Brush Cleaning Systems.These high quality brush systems keep the rails and the chain in top condition,preventingbuildupandproductcontamination.

3MIGHTY LUBE SYSTEMATIC LUBRICATION, INC | PRODUCT CATALOG

In2016,MightyLube launchedthe latestadditiontotheMightyLubepermanentmonitoring system, our Next Generation Conveyor Monitoring System. Thisconveyormonitoringunit continues tooffermanyof the features thatwerefine-tunedovertheyears. It incorporatesseveraladditionaloptionswhichinclude:dogspacemonitoring, lubrication cyclemonitoring and expanded chainwear analysis.We alsomade other improvements in the hardware technology,which allows formoreprecise,accuratereadings.NextGenerationconveyorchainwearmonitoringisavailableformoststandardconveyortypes.

MightyLubetakesgreatprideinourmonitoringsystemandwillcontinuetoadvance,utilizingthelatesttechnologyavailabletoprovideourcustomerswiththesolutionstheyrequire.

The family of Mighty Lube monitoring systems would not be complete withoutmentioning the latest two additions. Our single line and portable conveyor monitoring systems are thebest in the industry. Whileboth systemshavebeenavailableforseveralyears, itwasn’tuntilrecentlythatwecompletedaredesigntoaddmorefeaturesthatourcustomersprefer.

Theportablesystemnowprovidesbothlinkbylinkand10-footdata,islightweight,andbatterypowered.ItalsoincludesaWindowstabletforeaseindownloadingthedata,aswellascustomizedsoftware.Whiletheportablesystemisgreatforshopswithmultipleconveyorlines,thesinglelinesystemisdesignedforsmallercustomerswithonlyoneortwocriticallines.Thissystemisstationaryandprovidesthechainweardataforasingleconveyorwhendownloadedontothetabletorconnectedtoadesignatedcomputer.

The Conveyor Monitoring and Lubrication System is available for all standard conveyor systems!

PATENT INFORMATIONMIGHTY LUBE Equipment patents:

US Patent No 4,212,372MonorailI-BeamModification

US Patent No 1,503,203SelfContainedLubricationApparatus

US Patent No 4,537,285ConveyorLubricatingApparatus

US Patent No 4,844,203SelfContainedConveyorLubricatingApparatus

US Patent No 5,563,392 Canada Patent No 2,173,656MethodAndApparatusForMonitoringWearOfAContinuousChain.


MODEL#2000LFor Richards-Wilcox Overhead Conveyors

Lubricates Chain Pivots, Open Horizontal Bearings and Vertical Bearings.

MODEL#2001LFor Unibilt or Rapid Overhead Conveyors


MODEL#2002LFor Double Vertical Bearing Chain Conveyors

Lubricates Chain Pivots, Open Horizontal Bearings and Single and Double Vertical Bearings.

MODEL#2010LFor Round Tube Overhead Conveyors


*Customer must supply a 30” rail section for pre-mounting.

»Fullyprogrammableuserinterface

»Self-ContainedUnitsrequirea120VACpowersource

»Includesbuilt-inpowersupplyandreservoir

»LubricantCapacity:5.5gallonswithlowlevelalarm

»Unitsarepre-mountedonmodifiedrailsectionsunlessnoted

Horizon2000LSeriesSelf-ContainedEnclosedTrackConveyorLubricators

NOTE

Front View

Back View

*Additional models available. Please contact us for details.


MODEL#2003LFor Three Inch I-Beam Overhead Conveyors

Lubricates Chain Pins and Open Trolley Bearings.

MODEL#2004LFor Four Inch I-Beam Overhead Conveyors


MODEL#2006LFor Six Inch I-Beam Overhead Conveyors







Horizon2000LSeriesSelf-ContainedI-BeamConveyorLubricators

NOTE

Front View

Back View




Lubricates Chain Pivots, Open Horizontal and Vertical Bearings on Power Chain; Open Load Bearings and Guide Rollers on the Free Carrier.


Lubricates Chain Pivots, Open Horizontal Bearings, and Single and Double Vertical Bearings on the Power Chain; Open Load Bearings and Guide Rollers on the Free Carrier.


Lubricates Chain Pins and Open Trolley Bearings on Power Chain; Open Load Bearings and Guide Rollers on the Free Carrier.


Lubricates Chain Pins and Open Trolley Bearings on the Power Chain; Open Load Bearings and Guide Rollers on the Free Carrier.





»Customermustsupplyarailsectionwithatleast30”betweentheyokesforpre-mountingonallabovemodels

Horizon2000LSeriesSelf-ContainedPowerandFreeConveyorLubricators

NOTE

*Specialty conveyor or pivot point lubrication available by request.Please contact us for additional details and applications.


Greasessealedpowertrolleywheelswhiletheconveyorisrunningundernormalconditions.

Reduces downtime and manual labor operations in lubrication conveyor sealed power trolley wheels.

Eliminates surging caused by un-greased and worn wheels, so product can be space closer, increasing productivity.

Conveyor runs smoother, keeps product from swaying, reducing possibility of injuring on the line.

Less waste, A metered amount of grease is cleanly and precisely injected into wheel.

Works on overhead and inverted conveyors.

»OTHERSPECIALTYGREASERSCANBEMANUFACTURED

SealedWheelGreaserOP-201ConveyorSealedPowerTrolleyWheelGreaser

NOTE

REDUCESDOWNTIME

ELIMINATESSURGING

LESSWASTE






MODEL#9002LFor Double Vertical Bearing Chain Conveyors

Lubricates Chain Pivots, Open Horizontal Bearingsand Single and Double Vertical Bearings.

MODEL#9010LFor Round Tube Overhead Conveyors

Lubricates Chain Pivots, Open Horizontal Bearingsand Vertical Bearings.


9000LSeriesCentralSystemEnclosedTrackConveyorLubricators


»RequirestheuseofaCentralPumpingReservoirandPowerSupply

»Unitsarepre-mountedonmodifiedrailsectionsunlessnotedNOTE

Front View

Back View



MODEL#9000INVLInverted Square Tube For Richards-Wilcox Conveyors

Lubricates Chain Pivots, Open Horizontal and Vertical Bearings.

MODEL#9001INVLInverted Square Tube For Unibilt and Rapid Conveyors

Lubricates Chain Pivots, Open Horizontal and Vertical Bearings.

MODEL#9002INVLInverted Square Tube For Unibilt Power Rail

Lubricates Chain Pivots, Open Horizontal Bearings, Single and Double Vertical Bearings.

MODEL#9005INVLInverted Square Tube Power Chain and Free Carrier For Richards-Wilcox Conveyors

Lubricates Chain Pivots, Open Horizontal Bearings, Single and Double Vertical Bearings on the Power Chain; Guide Rollers and Open Load Bearings on the Free Carrier.


MODEL#9007INVLInverted Square Tube Power Chain and Free Carrier For Unibilt and Rapid Conveyors

Lubricates Chain Pivots, Open Horizontal Bearings, Single and Double Vertical Bearings on the Power Chain; Guide Rollers and Open Load Bearings on the Free Carrier.





9000LSeriesCentralSystemInvertedSquareTubeConveyorLubricators

NOTE



MODEL#9003LFor Three Inch I-Beam Overhead Conveyors with x348 Chain


MODEL#9004-4LFor Four Inch I-Beam Overhead Conveyors with x458 Chain


MODEL#9004-6LFor Four Inch I-Beam Overhead Conveyors with x658 Chain


MODEL#9006-6LFor Six Inch I-Beam Overhead Conveyors with x678 Chain


9000LSeriesCentralSystemI-BeamConveyorLubricators



»Unitsarepre-mountedonmodifiedrailsectionsunlessnotedNOTE

Front View

Back View



MODEL#9003-3INVLFor Three Inch Inverted I-Beam Conveyors with x348 Chain

Lubricates Open Trolley Bearings and Chain Pins. For Large Track Inverted Conveyors.


MODEL#9004-4INVLFor Four Inch Inverted I-Beam Conveyors with x458 Chain



MODEL#9004-6INVLFor Four Inch Inverted I-Beam Conveyors with x678 Chain



MODEL#9006-6INVLFor Six Inch Inverted I-Beam Conveyors with x678 Chain






9000LSeriesCentralSystemInvertedI-BeamConveyorLubricators

NOTE




Lubricates Chain Pivots and Open Horizontal and Vertical Bearings on Power Chain; Open Load Bearings and Guide Rollers on the Free Carrier.


Lubricates Chain Pivots, Open Horizontal Bearings, and Single and Double Vertical Bearings on the Power Chain; Open Load Bearings and Guide Rollers on the Free Carrier.







»Customermustsupplyarailsectionwithatleast30”betweentheyokesforpre-mountingonallabovemodels

9000LSeriesCentralSystemPowerandFreeConveyorLubricators

NOTE




»Customermustsupplyarailsectionwithatleast30”betweentheyokesforpre-mountingonallabovemodelsNOTE

MODEL#9125Caterpillar Drive Chain Lubricator

Lubricates Caterpillar Drive Chain and Dog.Operated by Controller on the Conveyor Lubricator.

MODEL#9126Auxiliary Cat Drive Chain Lubricator

Lubricates Auxiliary Caterpillar Drive Chain and Dog. Operated by Controller on the Conveyor Lubricator.

CaterpillarDriveLubricators

Mountedattheconveyordrives;theseunitsarearecommendedadditiontotheconveyorlubricationsystem.

MODEL#8049LEnclosed Track Overhead Free Carrier Lubricator

Lubricates Open Load Bearings and Guide Rollers.

MODEL#5062LI-Beam Overhead Free Carrier Lubricator


MODEL#5066LI-Beam Overhead Free Carrier Lubricator Load

Lubricates Open Bearings, Guide Rollers, Beaver Tail and Pop-Up Pusher Dog.

MODEL#8067LInverted Free Carrier



9000LSeriesCentralSystemFreeCarrierConveyorLubricators


MODEL#1122LIn-Floor Roller Flight Conveyor Lubricator

Lubricator is mounted on the conveyor frame above the return chains.Lubricates chain pins and open bearings.

MODEL#1126LIn-Floor Rider Plate Conveyor Lubricator

Lubricator is mounted over cutouts on the side of the conveyor channel.Lubricates chain pins and rider plates.

MODEL#1128LIn-Floor Drag Chain Conveyor Lubricator

Lubricator is mounted over cutouts on the side of the conveyor channel.Lubricates chain pins.

MODEL#1130LIn-Floor Flat Top Conveyor Lubricator


MODEL#1130-1LIn-Floor Dual Chain Flat Top Conveyor Lubricator



»Customermustprovideatleasta30”railsectionforallabovemodels

9000LSeriesSpecialPurposeConveyorLubricators

NOTE


MODEL#2131LPan/Scrap Conveyor Lubricator

Lubricator is mounted on the conveyor frame above the return chains. Lubricates chain pins and bearings.

MODEL#2133LPan/Scrap Conveyor and Hinge Lubricator

Lubricator mounted on the frame above the return chains.Lubricates chain pins, open bearings, and hinge pivots.

MODEL#9829LRoller Chain Lubricator

Lubricates chain swivels.


»Customermustprovideatleasta30”railsectionforallabovemodels

9000LSeriesSpecialPurposeConveyorLubricators

NOTE


MODEL#7010CCentral Pumping Reservoir

Ten Gallon Capacity.

MODEL#7065CCentral Pumping Reservoir

Sixty-five Gallon Capacity.

FEATURES:» Provides controlvoltage,communicationandlubricanttoremotelubricators»Automaticshut-downuponseveredlubricantsupplyline»Auto-startcontroloperatesthepumponlywhenlubricantisrequiredatthelubricatorheads»Pumpshutsdownattheendofthelubricationcycle»Lowlevelalarmandshutdown

7000CSeriesCentralPumpingReservoirandPowerSupply

MODEL#7065C

MODEL#7010C


TYPE MLAvailablein:5GallonPailsand55GallonDrumsBase:MoS2/EsterTemperatureRange:-65°F~500°F

• General Purpose, Anti-Wear and Thin-Film Lubricant• Base lubricants and anti-oxidants are suspended in a penetrating solvent which acts as both a cleaner and a carrier. • Solvent evaporates, leaving behind a thin film of the highest quality MoS2, rust inhibitors, and ester fluids

TYPE MXAvailablein:5GallonPailsand55GallonDrumsBase:MoS2/EsterTemperatureRange:-55°F~500°F

• General Purpose, Anti-Wear, and Thin-Film Lubricant• Solvent carrier agent acts as a cleaner, penetrator and carrier providing a pathway for the synthetic fluids and MoS2 to reach the wear points• Higher flash point provides a slightly more stable, longer lasting lubricant

TYPE MX-HTAvailablein:5GallonPailsand55GallonDrumsBase:ColloidalGraphite/EsterTemperatureRage:450°F~1200°F

• General Purpose, Anti-Wear, and Thin-Film Lubricant• Solvent carriers penetrate and evaporate leaving the base behind, essentially providing a semi-fluid lubricant• Graphite provides excellent high heat capability

TYPE CSM-2Availablein:5GallonPailsand55GallonDrumsBase:ColloidalGraphite/EsterTemperatureRange:450°F~1200°F

• Heavy Duty, Anti-Wear, and Thin-Film Lubricant• Solvent carrier agent acts as a cleaner, penetrator and carrier providing a pathway to reach wear points• Can stand up to pressures in excess of 100,000PSI• Higher flash point means slower evaporation allowing penetration to wear points at higher temperatures

ThinFilmConveyorLubricants

NOTE Theselectionofaproperlubricantdependsuponmanyfactors,including:heat,moisture,andpressure.Ifyouneedhelpselectingalubricantforyourspecificapplication,feelfreetotalktooneofourtechniciansat231-924-6160.


TYPE CCLAvailablein:5GallonPailsand55GallonDrumsBase:SyntheticEsterTemperatureRange:-65°F~575°F

• Heavy Duty– Clean, Clear Lubricant • Slight citrus aroma• Cleaner; breaks down inferior lubricants• Lasts up to twice as long as other lubricants • Does not cause build up on conveyor lines• Withstands extreme conveyor applications• Ashless lubricant that will not build up or varnish

TYPE SS3Availablein:5GallonPailsand55GallonDrumsBase:Ester/SyntheticMoS2

TemperatureRange:upto450°F

• Clean lubricant with excellent EP properties• High lubricity • Water dispersion qualities make it ideal on wash lines and other locations where moisture can be a problem

TYPE LDMAvailablein:5GallonPailsand55GallonDrumsBase:SyntheticEster/MoS2

TemperatureRange:-55°F~550°F

• Heavy duty, anti wear lubricant, • Ashless lubricant that will not build up or varnish• Withstands extreme industrial conveyor applications• Reduce and removes particles left from inferior lubricants and oils• Holds up extremely well at high temperatures• Excellent around moisture or wash lines• Cuts lubricant consumption• High flash point• Lasts up to twice as long as other lubricants

Theselectionofaproperlubricantdependsuponmanyfactors,including:heat,moisture,andpressure.Ifyouneedhelpselectingalubricantforyourspecificapplication,feelfreetotalktooneofourtechniciansat231-924-6160.NOTE





TYPE CNS Availablein:5GallonPailsand55GallonDrumsBase:SyntheticEsterTemperatureRange:Ambientupto500°F

• Non-Staining Lubricant• Thin film, anti-wear penetrating lubricant• Specially designed to lubricate and leave no residuals or carbons

TYPE SYN Availablein:5GallonPailsand55GallonDrumsBase:GlycolandEsterTemperatureRange:-55°F~550°F

• Specially formulated with no VOC’s• Designed to withstand extreme industrial conveyor application• Semi-clear, heavy duty, anti-wear lubricant

TYPE GPCAvailablein:5GallonPailsand55GallonDrumsBase:PureSyntheticWaterSolublePolymerwithOxiraneTemperatureRange:Ambientupto450°F

• Compatible with most automotive paints and coatings• Readily dissolves in water and water-based rinses and paints• Inhibits rust, corrosion and oxidation• Excellent thermal stability • Contains no silicone and will not adversely affect paint finishes• ISO Grade 22• No Voc’s• Biodegradable


TYPE GPC-220Availablein:5GallonPailsand55GallonDrumsBase:PureSyntheticWaterSolublePolymerwithOxiraneTemperatureRange:Ambientupto450°F

• Compatible with most automotive paints and coatings• Readily dissolves in water and water-based rinses and paints• Inhibits rust, corrosion and oxidation• Excellent thermal stability • Contains no silicone and will not adversely affect paint finishes• ISO Grade 220• No Voc’s• Biodegradable

TYPE CNS-HeavyAvailablein:5GallonPailsand55GallonDrumsBase:SyntheticEsterTemperatureRange:Ambientupto500°F

• Non-Staining Lubricant• Thin film, anti-wear penetrating lubricant• Specially designed to lubricate and leave no residuals or carbons• Water dispersion qualities make it ideal on wash lines and other locations where moisture can be a problem

TYPE 38Availablein:5GallonPailsand55GallonDrumsBase:PureSyntheticPolyolEsterTemperatureRange:-55°F~550°F

• No Voc’s • High Temperature, Ashless, Synthetic Conveyor Lubricant• Exceptional high temperature stability• Clean, low volatility, optimum viscosity

HigherViscosityConveyorLubricants

Theselectionofaproperlubricantdependsuponmanyfactors,including:heat,moisture,andpressure.Ifyouneedhelpselectingalubricantforyourspecificapplication,feelfreetotalktooneofourtechniciansat231-924-6160.NOTE


TYPE TRIBOSYN1High Temp GreaseAvailablein:14oz.Tubesand40lb.Pails(Larger sizes available upon request)

Base:EsterTemperatureRange:300°F~565°F

• Excellent mechanical stability with complete rust protection.• Extreme Pressure (EP) properties• Does not volatilize dry out, nor soften and run out of the bearing at elevated temperatures

WearMaster KG 453Availablein:14oz.Tubesand40lb.Pails(Larger sizes available upon request)

Base:CalciumComplexTemperatureRange:to550°F

• Specially designed for bearing in corrosive environments• Good extreme pressure abilities• Extremely stable and excellent resistance to water

ConveyorGreases


*Additional specialty grease options available.


MODEL#3-91BCForThreeInchI-BeamConveyor

REPLACEMENT BRUSHES#B913BRTB Top/Bottom (4)#B913BRS Sides (2)

MODEL#4-91BCForFourInchI-BeamConveyor

REPLACEMENT BRUSHES#B914BRTB Top/Bottom (4)#B914BRS Sides (2)

MODEL#6-91BCForSixInchI-BeamConveyor

REPLACEMENT BRUSHES#916BRTB Top/Bottom (4)#916BRS Sides (2)

I-Beam Conveyor Beam Sweep• Cleansthewebsurfacesoftherail•Reducesdebrisfalloutandimprovesgroundingcontact•Easilyinstalledandremoved

I-BeamConveyorBrushCleaningSystems

Yoke Cleaning Brush• Removes buildupfromhardtoreach,oftenoverlookedsourcesofcontamination•Mountingblockweldstothebottomoftherail•Brushiseasilyreplaced

MODEL#30YForThreeInchI-BeamConveyor

REPLACEMENT BRUSHES#30RB (1) for #30Y

MODEL#40YForFourInchI-BeamConveyor

REPLACEMENT BRUSHES#40RB (1) for #40Y


PowerandNon-PowerBrushCleaners

Non-Power Brush Cleaning SystemI-Beam Conveyor Chain Cleaner

• Cleanschainandtrolleys•Removesdebrisandreducesrejectswithoutcontaminatingparts•Adjuststocontacthardtoreachpoints•Springloadedtopreventjammingifahangerpassesatanoddangle

MODEL#300-IForThreeInchI-BeamConveyor

MODEL#400-IForFourInchI-BeamConveyor

MODEL#600-IForSixInchI-BeamConveyor

REPLACEMENT BRUSHES#75RB (20) for #300-I / #400-I / #600-I

* Standard assembly includes crimped carbon steel brushes. Assemblies with Carbide Impregnated Nylon brushes are also available.

Power Brush Cleaning SystemConveyor Chain & Trolley Wheel Cleaner

• Cleanswhileconveyorisinoperation.•Removesdirt,rust,scale,and/orchemicalresidue•Worksforoverhead,invertedandfloorconveyors•Brushesshapedforyourconveyor,forefficientoperation

MODEL#OP-08

REPLACEMENT BRUSHES AVAILABLE

MODEL#OP-08


Enclosed Track Channel Sweeps• Removesdirtanddebrisfromtheinternalconveyortracksurfacestoimprovegroundingandreducerejects• Easilyinstalledbyreplacingasinglechainlink• Replaceablebrushes

EnclosedTrackConveyorBrushCleaningSystems

MODEL#UN91ForUnibiltandRapidConveyors

REPLACEMENT BRUSHES#91302RB (4) for #UN91

MODEL#RW91ForRichardsWilcoxConveyors

REPLACEMENT BRUSHES#91312RB (4) for #RW91

MODEL#8074BForUnibiltandRapidConveyors

MODEL#8075BForRichardsWilcoxConveyors

REPLACEMENT BRUSHES#50RB Sides (4) for #8074B / #8075B#75RB Top (1) for #8074B / #8075B

MODEL#UN91

MODEL#RW91

MODEL#8074B

MODEL#8075B

Enclosed Track Chain Cleaners• Removedirtanddebrisfromenclosedtrackconveyorchains•Unitsarepre-mountedonmodifiedrailsection

* Brass brushes are standard for assemblies and replacement brushes. Stainless Steel brush assemblies and replacement brushes are also available.


OtherConveyorBrushCleaningSystems

Overspray Eliminator Brush•Mountsatthelocationofthelubricator•Preventscontaminationofpartsbylubricantoverspray•Brushesareeasilyreplaced

MODEL#800QCB

Parts Saver BrushAvailableformostconveyortypes

REPLACEMENT BRUSHES#91006RB (2) for #800QCB

MODEL#800QCB


NextGenerationMightyLubeConveyorMonitoringSystem

1 Howmuchdoesaminuteofdowntime cost? 2 Ifyourconveyorchainneedstobereplaced,

whatwouldthetotalcostbe? 3 Whatarethecostsinvolvedindiagnosing

and repairingtheproblemwithaline?

WhenconsideringtheConveyorMonitoringSystem,thinkaboutthefollowingquestions:


WithMIGHTYLUBE’SCONVEYORMONITORINGSYSTEM,yourmindwillbeatease.Allvitalconveyorparametersaremonitored.Whenanyconditionexceedslimits,youwillbepromptly alerted,bothonscreenandbyemail.

Extend Equipment LifeForExample,a2000footchaincostsapproximately$50,000withanaveragelifeoffiveyears.Ifyouareabletoextendthelifeofthechainbyonlyayear,thesavingswouldbe$10,000.

Afacilitywithtenconveyorsofthissizecouldrealizeasavingsofover$100,000fromwearcostsalone!

Lower Power ConsumptionFindingthebestbalanceoflubricationandairpressurewhilemonitoringthepowerconsumption,substantialenergysavingscanbeachieved.

Iftheelectricalcostofoperatingyourconveyorsis$5,000permonth,andtheaverageamperagedrawis5amps,reducingtheamountbyonlyoneampwouldresultinyearlysavingsof$12,000.

Pinpoint Wear Before Chain FailureTheconveyorchaindoesnotwearevenlythroughoutthelengthofthechain.

Normally,sectionsofthechainareremovedatrandom.Thesectionsremovedmaybeinexcellentconditionwhileotherlengthsofchainarenearitswearlimits.

Byknowing the exact locationofthegreatestwear,thesectionmostlikelytofailunexpectedlycanberemoveddowntotheindividuallink.

Thiscouldasmuchasdoublethelifeofthechain,savingthousandsperyear!

Avoidingcatastrophicfailureanddisastrousproductiondowntime,whichcosts$5,000,$10,000ormoreperminute,isalwaysthegoalofanygoodmaintenanceprogram.

WiththeMIGHTY LUBE CONVEYOR MONITORING SYSTEM,problemsarereportedbeforetheyoccur,allowingroutinemaintenancetotaketheplaceofproductiontimerepair.



Monitors conveyor chain wear - link by link and 10ft data

Provideschainwearaverageandchainlifeprojection

Monitorsdriveamps,airtake-upandcounterweighttake-updistance

Monitorschainspeedanddrivehours

Industry leader in preventative and predictive conveyor care.


Next Generation MIGHTY LUBE MONITORING SYSTEM adds:

Detailedlubricationreportsandsettingschanges*

Newandimprovedanalyticaldata

Dogpitchspacingmonitoring

Severalnewcolorconditions

SupportsuptoWindows10PC

*Lubrication reports and settings only available in Permanent Monitor PLUS Lubrication models.


Full-Color, Printable Charts and Graphs


MODEL#9101MMonitorforUnibilt/RapidEnclosedOverheadConveyors

MultiLine(Permanent)MightyLubeMonitoringSystem

Monitors Conveyor Chain Wear - Link by Link

OptimalMonitoringSolutionforConveyorSystems

Newanalyticaldatascreens,suchaslongtermchainwearaverage

Monitorupto100conveyorswithoneexpandablesystem

Utilizesthelatestpatentedtechnology

ViewdatafromanyPCconnectedtoyournetwork

Optionalpaintmarkerallowsforautomaticmarkingofwornorquestionablelinks

I-Beam ModelFront View

I-Beam ModelBack View

PERMANENT SYSTEM MODELSEnclosed Track

I-BeamMODEL#9103MMonitorfor3”OverheadMonorailx348Conveyors

MODEL#9104-4MMonitorfor4”OverheadMonorailx458Conveyors


Additional models available for Inverted and Specialty Conveyors.

Enclosed Track ModelFront View


Experiencethemaximum potentialofMightyLube’sNextGenerationConveyorMonitoringSystemwiththeALLINONEconveyormonitoringPLUSlubricationsystem.Thisstate-of-the-artsystemallowsforadditionalmonitoringcapabilitiesaswellaschangestolubricationsettingsfromthemonitoringsystemsoftware.

MultiLine(Permanent)ALL IN ONE Monitoring+Lubrication


Detailed lubrication reports including:LubeHeadVoltage

PumpStatus

LubricationLevels

CycleDataTimeStampedLubricationCycles&ChangesControl/MonitorExternalLubricationDevices

ALL IN ONE SYSTEM MODELSEnclosed Track

I-Beam

MODEL#9100MLMonitorPLUSLubricatorforRichardsWilcoxEnclosedOverheadConveyors

MODEL#9101MLMonitorPLUSLubricatorforUnibilt/RapidEnclosedOverheadConveyors

MODEL#9103MLMonitorPLUSLubricatorfor3”OverheadMonorailx348Conveyors

MODEL#9104-4MLMonitorPLUSLubricatorfor4”OverheadMonorailx458Conveyors

MODEL#9104-6MLMonitorPLUSLubricatorfor4”OverheadMonorailx678Conveyors


Portable(Multi-Line)MightyLubeMonitoringSystem

SoftwareLicenseandMightyLubeProgramIncluded.


Portable(Multi-Line)MightyLubeMonitoringSystem


Portablesoitcanbeusedonmultipleconveyorsinafacility

Batterypoweredforeaseofuse

Directionoftraveldetection

Easyinstallationandsetup

IncludesWindowsbasedtabletwithUSBconnection


Optionalpaintmarkerallowsforautomaticmarkingofwornorquestionablelinks

Optionofmetricorstandardmeasurementsprovided

Back View

Front View

PORTABLE SYSTEM MODELSI-BeamMODEL#6103-3/4MMonitorfor3”OverheadMonorailx348/x458Conveyors

MODEL#6104-4/6MMonitorfor4”OverheadMonorailx458/x678Conveyors



SingleLine(Stationary)MightyLubeMonitoringSystem

SoftwareLicenseandMightyLubeProgramIncluded.


SingleLine(Stationary)MightyLubeMonitoringSystem


SingleLineSystem-Monitorthecriticallinesindividually


IncludesWindowsbasedtabletwithUSBconnection

SingleuselicenseandMightyLubeprogramincluded

Optionofmetricorstandardmeasurementsprovided

Front View

Back View

SINGLE LINE SYSTEM MODELSEnclosed Track

I-Beam

MODEL#5701MMonitorforUnibilt/RapidEnclosedOverheadConveyors








PaintMarkerforMonitoringSystem(Optional)

Allows for automatic marking of worn links or areas that exceed company set parameters

• CompatiblewithallMightyLubeConveyorMonitoringSystems

• Portable–canbemovedfromoneconveyortoanother

• Powerandcontrolprovidedfrommonitoringheadunit

• Utilizesstandardaerosolpaintcan(notincluded)

• Includes8-ft.controlcable

• Availableforinvertedandoverheadconveyors

product catalog10 product catalog it lbe systeatic lbication inc model #9003l for three inch i-beam...

Documents