pro hire group - wollongong equipment hire

1300 768 459

12ft GENIE RUNABOUT GRC12

Specifications:

Work Height: 5.66m

Raised Platform Height: 3.66m

Stowed Height: 1.70m

Width: 0.80m

Stowed Length: 1.37m

Weight: 948kg

Overall Capacity: 227kg

Max # of Persons (0 wind rating): 2

Page 5

Standard Features:

• AC power to platform

• Battery charge indicator

• Compact base 0.75 x 1.37m

• Ground clearance 2.5in stowed

• Auxiliary platform lowering

• 2 person rated

• Pothole protection

• Zero inside turning radius

• Solid rubber non-marking tyres

12ft SKYJACK SJ12 MAST LIFT

Specifications:

Work Height: 5.65m


Lowered Platform Height: 0.45m

Overall Width: 0.76m

Overall Length: 1.37m

Weight: 782kg



Standard Features:

• Wiring for AC outlet on platform

• 0.41m traversing platform

• 24V DC power source

• 30% gradeability

• Variable speed, front two wheel

hydraulic drive

• Drivable at full height

• Pothole protection system

• Relay based control system

• Tilt alarm with drive & lift cut-out

• Overload sensing system

• Solid rubber, non-marking tyres

• Lowering warning system

• Wet disc SAHR brakesTrailer also available for

GRC12 and SJ12 models

16ft SKYJACK SJ16 MAST LIFT

Specifications:

Work Height: 6.75m






Weight: 966kg



Standard Features



• Wet disc SAHR brakes

• Proportional controls








• All motion audible alarm

19ft SKYJACK SJ3219 SCISSOR LIFT

Specifications:

Work Height: 7.79m





Weight: 1579kg



Standard Features


• 90deg steering


• Wet disc SAHR brakes







• Analog control system


• All motion audible alarmTrailer also available

For SJ16 and SJ3219 models

32ft HAULOTTE HA12CJ+ ELECTRIC BOOM

Specifications:

Work Height: 11.7m


Horizontal Outreach: 7.22m

Up & Over Clearance: 4.74m


Width: 1.2m

Length: 5.64

Platform Size: 1.15m x 0.8m

Weight: 7040kg



Standard Features:

• Ergonomic control panels

• Tilt sensor

• Emergency hand pump

• 2 wheel drive and steer

• Automatic platform levelling

• On board charger 48V – 50A

• Safe to use in winds up to 45km/h

• Solid non-marking tyres

• Load Management System in the

platform

• 180deg horizontal jib rotation

• 355deg turntable rotation


46ft SKYJACK SJ46AJ DIESEL BOOM

Specifications:

Work Height: 16.15m


Horizontal Outreach: 7.68m

Up & Over Clearance: 7.63m


Stowed Width: 2.24m

Stowed Length: 6.50m

Weight: 6981kg


Jib Length: 1.42m

Platform Size: 1.83 x 0.76m

Engine: 48HP Deutz Diesel

Standard Features:

• Axle based 4WD system

• Oscillating axle

• Driveable at full height

• 360deg continuous turret rotation


• Modular platform railing system

• Wiring outlet on platform

• Direction sensing drive & steer

controls




• Wet disc SAHR brakes (rear axle)

• Grip lug foam-filled tyres

CAT 301.7D CR EXCAVATOR

Specifications:

Weight: 1690kg

Power: 13.2kW / 17.7hp @ 2200rpm

Max Digging Height: 3.43m

Max Digging Depth: 2.32m

Max Digging Reach at Ground Level:

3.84m



Overall Height: 2.362m

Tail Swing Radius: 0.722m

Lifting Capacity (Max Reach): 113kg

Special Features

• Standard auxiliary hydraulics

• Integrated counterweight and

tight tail swing

• Rubber tracks

• Two-post ROPS canopy

• Load sensing hydraulic system

• Safety Lock Out

• Adjustable suspension seat

• 2 Way Hammer / Auger Piping

• Available on a trailer

KOMATSU PC18MR-3 EXCAVATOR

Specifications:

Weight: 1780kg

Max Digging Height: 3.62m


Max Digging Reach at Ground

Level: 3.94m

Loading Height: 1.22m





Lift Capacity (Max Reach): 220kg

Special Features



• Integrated counterweight and

tight tail swing

• Automatic load sensing two-

speed travel

• High strength X-track frame

• Fully adjustable suspension seat

• Available on a trailer

KOMATSU PC35MR-3 EXCAVATOR

Specifications:

Weight: 3575kg

Max Digging Height: 5m


Max Digging Reach at Ground

Level: 5.17m

Loading Height: 1.8m





Lift Capacity (Max Reach): 345kg

Special Features


• Integrated counter weight and

tight tail swing


• Automatic load sensing two-

speed travel

• High strength X-track frame

• 2 Way hammer / Auger Piping

• Adjustable suspension seat

CAT CB14B ROLLER

Specifications:

Weight: 1520kg

Drum Width: 1000mm

Overall Length: 1950mm

Overall Width: 1102mm

Overall Height: 2545mm

Engine Power: 16.8kW

(22.5hp) @ 2850rpm

Side Clearance: 45mm

Curb Clearance: 400mm

Special Features

• Adjustable seat

• Pressurized system with four nozzles per

drum optimise water coverage

• Standard 100L water tank

• Retractable front & rear drum scrapers

• Rubber mounts minimise vibration to the

operator station

• Performs well on uneven surfaces, and

steeper grades

• Continuous full-drum traction on soft

base materials

• Quiet operation and lower vibration

• Foldable ROPS

• Machine can fit on trailer

ISUZU FRR 500 TIPPER

Specifications:

Medium Rigid Licence Required

GVM: 10,400kg

GCM: 16,000kg

Engine: SiTEC III 205

Power: 151kw @ 2,600rpm

Torque: 637Nm @ 1,600rpm

Wheelbase: X-Long 5,320mm

2015 Model

Diesel Turbo Charge

4 Cylinders

Single Cab

Features:

• 6 Tonne Towbar

• 6 Speed Manual

• Pintle Hook Ball Combination

• Reducer

• Reverse Camera

• Power Windows

• 3 Seats

• Retractable Tarp

• Air-Con

• DAVE Media System

• Electric ABS Brakes

ISUZU NLR200 TIPPER

Specifications:

Car Licence Only Required

GVM: 4,500kg

GCM: 7,000kg




– 2,800rpm

2015 Model

6 Auto-Mated Manual

4 Cylinders

Features:

• 2 Tonne

• 3.0L Turbo

• 6 Speed Automated Manual

• Towbar & Reducer

• Retractable Mesh Tarp

• DAVE Media System

• Air-Con

• 3 Seats

• Power Steering

• Anti-lock braking system (ABS)

• Anti Skid Regulator (ASR)

ISUZU NPR 200 TIPPER

Specifications:


GVM: 4,500kg

GCM: 8,000kg




– 2,600rpm

2015 Model

6 Speed Manual

4 Cylinders

Features:

• 5.2L Turbo

• 3.5 Tonne Tow Bar

• Pintle Hook Combination

• 3,500kg braked towing capacity

• Air-Con

• Dave Media System

• Power Steering

• Anti-lock braking system (ABS)


• 3 Seats

ISUZU NNR200 PANTECH

Specifications:


GVM: 4,500kg

GCM: 8,000kg


Torque: 375Nm @

1,600rpm – 2,800rpm

2015 Model

Auto-Mated Manual

4 Cylinders

Cab Chassis

Features:

• 3L Turbo

• 6 Speed Automated Manual

• 3 Tonne

• Ply Safe Flooring

• Rear barn doors

• 500kg tuckaway tailgate loader

• Reverse Camera

• Power Steering

• ABS Braking system


• Pantech body – 4200L x 2300W x

2200H

FLOOR STRIPPER BEAVER 300

Features:

• Direct shot oscillating blade system

• Forward & reverse high speed override

• Highly aggressive hit directly to the blade

• For Medium to Large domestic, commercial

and industrial projects

• Removes glued down floors, commercial

carpet, gummy adhesives, vinyl tiles, solid

vinyl, radial rubber-tiles, sheet rubber,

sports surfaces, roofing material and some

ceramic tiled floor surfaces

• Vibration dampened operator handle

Specifications:

Power: 240v / 1HP

RPM: 1440

Blade Width: 70-250mm

Weight: 160kg

SATELLITE 480 DIAMOND GRINDER

Specifications:

Power: 2200w / 3HP

Volt: 240v

RPM: 360

Suction: 50mm

Production: 40-75sqm/hr

Width: 480mm

Weight: 160kg

Features:

• Adjustable axle height for ease of use

• Direct drive

• Ergonomic design – balance operation

which reduces operator fatigue

• Floating dust shroud for effective dust

control

• For small to medium sized domestic,

commercial and industrial projects

• Machine can be used for grinding,

polishing, buffing, concrete removal,

levelling, cleaning, glue removal and

re-surfacing.

Need to control the dust?

Hire our Dust Extractor.

FLOOR SCARIFIER CPM-8

Specifications:

Power: 2.2kw / 3HP

Working Depth: 2-3mm

Working Width: 200mm

Weight: 92kg

Dimensions: 97L x 48W x 99H

Volt: 240v Electric

Production rate: 35-50sqm / hr

Features:

• Weight of machine provides excellent control

and ease of use

• Six-shaft drum assembly holds more cutters

per loading for added grinding action.

• A variety of accessories and cutters to

achieve the profile, depth and speed needed

for each job.

• Power source directly over drum to eliminate

vibration and maximise surface contact.

• Ideal for sidewalk repair, coating and traffic

line removal, floor preparation and creating

nonslip surfaces

TWISTER RIDE-ON-FLOOR SCRAPER

Specifications:

Power: 75HP / LPG

Speed: 152 m/min

Blade Width: 600mm

Weight: 1910kg loaded

Dimensions: 1870L x

660W x 1520H

Production Rate:

130sqm/hr

Features:

• Comfortable to ride and drive

• Extremely quiet

• Hydraulic Oil Cap 56L

• Powered by a Ford four cylinder LPG engine

• Removes Carpet, Vinyl Tiles, Sheet Vinyl,

Parquetry, Ceramic Tiles, Mosaic Tiles,

Slate, Quarry Tiles, Terrazzo Tiles, Rubber

Sports Floor

pro hire group - wollongong equipment hire

Services