SL NO.

DESCRIPTION OF ITEM UNIT QTY. RATE(in Rs) AMOUNT

1

8 Mtr. Long 200 Kgs. P.C.C. Pole with R.C.C. Base Plate /Pad inearth including excavation,refilling and ramming etc. as required (1/6th length of the pole to be embeded in earth), including carryingof the materials from Gomati factory stack yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Engg-In-Charge.

Nos. 55

2

8 Mtr. Long S.T. Pole of Designation 410SP-15(IS2713,PtI,II,III,1980) with base plate direct in earth includingexcavation, refilling and ramming etc, as required (1/6th length ofthe pole to be embeded in earth ) and grouting with CC of ratio1:2:4 (1 Cement, 2 River Sand and 4 jhamabrick aggregate of 20mm nominal size) including supply of cement,aggregate completewith excavation, refilling of earth, ramming alongwith centeringand shuttering as required @ 0.273 Cum per S.T. Pole as perTSECL specification )etc. and applying paints with ready mixedprimer (2 or more Coats ) and almunium paints of approved qualityto give an even shade etc, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

Nos. 51

3

Stringing & sagging of 1.1 K.V. L.T. AB Cable on P.C.C. poleaverage span of 25 m to 40 m with fixing of Nylon Cable tie to betied every 2 mtr interval of AB Cable with fixing of End caps at allopen ends of AB Cable -1X25+1X16+1x25 SQMM ( insulatedmessanger) AB Cable, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

KM 4

4

Erection of anchor Clamp suitable for AB Cable of 25/16 sq.mm.insulated Massenger , including errection of G.I. Pole clamp, G.I.Flat type Eye Hook, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

Nos. 63

5

Erection of Suspension clamp suitable for.insulated Massenger,including errection of G.I. Pole clamp, G.I. Flat type Eye Hook,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

Nos. 106

6

Erection of insulating Piercing connectors for connection ofDistribution Boxes including connection with AB Cable, includingcarrying of the materials from Gomati RE-DDUGJY Store yard towork site by mechanical transport/hand cart/manual carryingincluding loading, unloading and stacking as required, as perdirection of Engg-In-Charge.

Nos. 508

PRICE SCHEDULE

A. ERECTION CHARGE FOR DRAWAL OF LT AB CABLE (1X25+1X16+1x25 SQMM)

Erection of Materials Including Carrying.

Name of Work : Execution of HT/LT Lines, installation of Distribution Sub Station and providing BPL ServiceConnection at Tepania Block in Gomati District under RE-DDUGJY Scheme.

65

7

Erection of Insulating Piercing Connectors for ABC teeConnection including Connection with AB Cable, includingcarrying of the materials from Gomati RE-DDUGJY Store yard towork site by mechanical transport/hand cart/manual carryingincluding loading, unloading and stacking as required, as perdirection of Engg-In-Charge.

Nos. 106

8

Erection of distribution box on pole by 2 Nos Steel strap & buckles/ G.I. Clamp, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

Nos. 106

9

Erection of preinstalled Water proof crymping type sleeves forStraight through joints, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

Nos. 13

10

Erection of Bimetalic Crymping Type Waterproof lug for16/50/70/35mm L.T. Power cables (1 set=4 Nos.), includingcarrying of the materials from Gomati RE-DDUGJY Store yard towork site by mechanical transport/hand cart/manual carryingincluding loading, unloading and stacking as required, as perdirection of Engg-In-Charge.

Nos. 8

11

Erection of L.T.Stay set completewith rod, plate, straining screwthimble guy insulator as per IS specification including fastenedwith hot dip (heavy duty galvanised stranded wire of size7/2.50mm alongwith stay clamps ,Nuts & bolts etc. as required andgrounding stay set with CC of ratio 1:2:4 (1 Cement,2 Riversand 4jhamabrick aggregate of 20mm nominal size )i/c supply of cement,sand and brick aggregate complete with excavation , refilling ofearth ramming alongwith centering and shuttering as required (@0.119Cu.m per stay set as per TSECL specification, includingcarrying of the materials from Gomati RE-DDUGJY Store yard towork site by mechanical transport/hand cart/manual carryingincluding loading, unloading and stacking as required, as perdirection of Engg-In-Charge.

Nos. 34

12 Pole numbering with Black Colour on yelow shade as required digit as per direction of Engg-In-Charge.

Nos. 106

13Supply of Pole Clamp (50x8 mm) on existing pole with MS Clampand Nuts & bolts (suitable for Eye Hook) . Make : 3-M, AxisElectrical Componants (I) Pvt. Ltd. , Raychem RPG.

Nos. 106

14Supply of Galvanised Steel made Eye Hook with Hot dipGalvanised Nuts & bolts (suitable for reqired Cable size). Make : 3-M, Axis Electrical Componants (I) Pvt. Ltd. , Raychem RPG.

Nos. 106

SL NO.

Description of item Quantity Unit Unit Rate in Rs.Amount

in Rs.

1

8 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad inearth including excavation, refilling and ramming etc. as required(1/6th length of the pole to be embedded in earth),includingcarrying of the materials from factory stack yard of Gomati districtto work site by mechanical transport/hand cart/manual carryingincluding loading, unloading and stacking as required

126 Nos.

B. ERECTION CHARGE FOR CONSTRUCTION OF 1 PHASE - 2 WIRE L.T . LINE ON 8

Erection of Materials Including Carrying.

Total

66

2

8 M long Steel Tubular poles of Designation 410 SP 15 (IS 2713,Pt I, II, III 1980) with base plate direct in earth includingexcavation, refilling and ramming etc. as required (1/6th length ofthe pole to be embedded in earth) and grouting with CC of ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.nominal size) i/c supply of cement, sand and brick aggregatecomplete with excavation, refilling of earth, ramming alongwithcentering and shuttering as required (@ 0.273 Cum per SteelTubular Pole as per TSECL specification ) etc. and applying paintswith ready mixed primer (two or more coats) and alluminium paintof approved quality to give an even shade etc. asrequired,including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Eng-In-Charge.

117 Nos.

3

Galvanised Stay set complete with rod, plate , straining screw,thimble, guy insulator as per IS specification including fastenedwith hot dip (heavy duty) galvanized stranded wire of size 7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supplyof cement, sand and brick aggregate complete with excavation,refilling of earth, ramming alongwith centering and shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL specification).including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

117 Set

4

ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,binding materials etc as required as per technical specification,approved drawings and scope of work,including carrying of thematerials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

19 KM

5

8 SWG GI Wire for continuous earthing of L.T. Line, as pertechnical specification, approved drawings and scope of workincluding craddle gaurding with fitting, fixing by reel insulator andincluding carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

1264 KG

6

Erection of anti climbing devices viz barbed wires on polestructures in helical form(1.5kg per pole), including carrying of thematerials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

243 NO.

7

Erection of porcelein shackle insulator for LT system with GI UClamps and required assorted nuts and bolts, washers etc.including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

486 Nos.

8

40 mm dia., 2500 mm long GI pipe earth electrode with test link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt andother accessories complete as per technical specifications for LTOverhead line's every 5th pole earthing and line structure earthingas per approved drawings, specification and scope of work.including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

49 Set

67

9

C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle) includingfastened with galvanised Clamps and Nuts & Bolts etc. asrequired. Including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Eng-In-Charge.

146 Nos.

10

L.T Danger Plate(57/1988), on single/double pole structure at aheight of 4mtr from the GL. Including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Eng-In-Charge.

243 No.

11 Pole numbering with Black Colour on yelow shade as requireddigit as per direction of Engg-In-Charge.

243 Nos.

12Supply of Nuts & Bolts including washer as reqired Properlygalvanised as per I.S for Erection of LT 1-Ph 2 Wire Line on PCC& Steel Pole

389 Kg

13 Supply of Reel Insulator(16-25 Sq.mm) 486 Nos.

SL NO.

Description of item Quantity Unit Unit Rate in Rs.Amount

in Rs.

1

8 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad inearth including excavation, refilling and ramming etc. as required(1/6th length of the pole to be embedded in earth),includingcarrying of the materials from factory stack yard of Gomati districtto work site by mechanical transport/hand cart/manual carryingincluding loading, unloading and stacking as required

11 Nos.

2

8 M long Steel Tubular poles of Designation 410 SP 15 (IS 2713,Pt I, II, III 1980) with base plate direct in earth includingexcavation, refilling and ramming etc. as required (1/6th length ofthe pole to be embedded in earth) and grouting with CC of ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.nominal size) i/c supply of cement, sand and brick aggregatecomplete with excavation, refilling of earth, ramming alongwithcentering and shuttering as required (@ 0.273 Cum per SteelTubular Pole as per TSECL specification ) etc. and applying paintswith ready mixed primer (two or more coats) and alluminium paintof approved quality to give an even shade etc. as requiredincluding carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

10 Nos.

3

Galvanised Stay set complete with rod, plate , straining screw,thimble, guy insulator as per IS specification including fastenedwith hot dip (heavy duty) galvanized stranded wire of size 7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supplyof cement, sand and brick aggregate complete with excavation,refilling of earth, ramming alongwith centering and shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL specification),including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

10 Set

Total

C. ERECTION CHARGE FOR CONSTRUCTION OF 3-PHASE -4-WIRE ON 8 Mtr. PCC/

Erection of Materials Including Carrying.

68

4

ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,binding materials etc as required as per technical specification,approved drawings and scope of work, including carrying of thematerials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

3 KM

5

8 SWG GI Wire for continuous earthing of L.T. Line, as pertechnical specification, approved drawings and scope of workincluding craddle gaurding with fitting, fixing by reel insulatorincluding carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

111 KG

6

Erection of anti climbing devices viz barbed wires on polestructures in helical form(1.5kg per pole), including carrying of thematerials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

21 Nos.

7

Erection of porcelein shackle insulator for LT system with GI UClamps and required assorted nuts and bolts, washers etc.including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

85 No.

8

40 mm dia., 2500 mm long GI pipe earth electrode with test link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt andother accessories complete as per technical specifications for LTOverhead line's every 5th pole earthing and line structure earthingas per approved drawings, specification and scope of work.including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

4 Set

9

C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle) includingfastened with galvanised Clamps and Nuts & Bolts etc. asrequired. including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Eng-In-Charge.

13 Nos.

10

L.T Danger Plate(57/1988), on single/double pole structure at aheight of 4mtr from the GL.including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Eng-In-Charge.

21 Nos.

11 Pole numbering with Black Colour on yelow shade as requireddigit as per direction of Engg-In-Charge.

21 Nos.

12Supply of Nuts & Bolts including washer as reqired Properlygalvanised as per I.S for Erection of LT 1-Ph 2 Wire Line on PCC& Steel Pole

46 Kg

13 Supply of Reel Insulator(16-25 Sq.mm) 43 Nos.

SL No.

Description of materials Quantity Unit Rate (in Rs.) Amount (in Rs.)

1

Erection of 9 Mtr PCC pole with RCC Base plate/pad, includingcarrying of the materials from Gomati factory stack yard to worksite by mechanical transport/hand cart/manual carrying includingloading, unloading and stacking as required, as per direction ofEng-In-Charge.

96 Nos.

TotalD. ERECTION CHARGE FOR 3 PHASE 11KV LINE ON P.C.C. & STEEL POLE WITH ACSR WEASEL

Erection Charge

69

2

9 M long Steel Tubular poles with welded steel base plate ofDesignation 540 SP 52 (IS 2713, Pt I, II, III 1980), with base platedirect in earth including excavation, refilling and ramming etc. asrequired (1/6th length of the pole to be embedded in earth) andgrouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhamabrick aggregate of 20 mm. nominal size) i/c supply of cement, sandand brick aggregate complete with excavation, refilling of earth,ramming alongwith centering and shuttering as required (@ 0.273Cum per Steel Tubular Pole as per TSECL specification ) etc. andapplying paints with ready mixed primer (two or more coats) andalluminium paint of approved quality to give an even shade etc. asrequired including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Eng-In-Charge.

40 Nos.

Erection of Cross arms made of 100 x 50 x 50 x 6 mm M.S.Channel i/c. fastened with galvanised clamps and N&B etc. asrequired duly galvanised as per relevant I.S. Including carrying ofthe materials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.(a) Single pole top bracket 0.3 mtr. Long 79 Nos.b) Double pole cross-arm 2.20 mtr. Long 28 Nos.

4

V-cross-arm made of 75x40x40x6 mm Ms channel dulygalvanised as per relevant I.S.i/c. fastened with galvanised clampsand N&B etc. as required including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Eng-In-Charge.

79 Nos.

5

Single Pole protective guard bracket 1.6mtr. Long by 65x65x6 mmM.S.Angle duly galvanised as per relevant I.S.i/c. fastened withgalvanised clamps and N&B etc. as required Including carrying ofthe materials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

74 Nos.

6

Double pole guard bracket, 2.5 mtr. Long by 65x65x6mm M.S.Angle duly galvanised as per relevant I.S.i/c. fastened withgalvanised clamps and N&B etc. as required Including carrying ofthe materials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

34 Nos.

Double Pole Cross bracing made of 65 x 65 x 6 mm M.S. Angleduly galvanised as per relevant I.S.i/c. fastened with galvanisedclamps and N&B etc. as required Including carrying of thematerials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.a) 1.8 mtr long for horizontal bracing 57 Nos.

(b) 3.2 mtr long for cross bracing 57 Nos.

3

7

70

8

Galvanised Stay set complete with rod, plate , straining screw,thimble, guy insulator as per IS specification including fastenedwith hot dip (heavy duty) galvanized stranded wire of size 7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supplyof cement, sand and brick aggregate complete with excavation,refilling of earth, ramming alongwith centering and shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL specification),including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

79 Set

9

11 KV 45 KN Polimeric Disc Insulator with hardware fittings,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

187 Set

10

11KV Polimeric insulator, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Eng-In-Charge.

311 Set

11

ACSR Conductors (6/1/2.59mm) Weasel / Rabbit with Jointingsleeves, binding materials etc as required as per technicalspecification, approved drawings and scope of work, includingcarrying of the materials from Gomati RE-DDUGJY Store yard towork site by mechanical transport/hand cart/manual carryingincluding loading, unloading and stacking as required, as perdirection of Eng-In-Charge.

17 KM

12

8 SWG GI Wire for cradel guard for road, pond, cherra, river andhouse etc of 11 KV Line, as per technical specification, approveddrawings and scope of work, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Eng-In-Charge.

6 KM

13

40 mm dia., 2500 mm long GI pipe (ISI marked) earth electrodewith test link, RCC pit, RCC cover, placed on GI frame,Charcoal, Salt and other accessories complete as per technicalspecification, approved drawings and scope of work for doublepole, including supply of materials and including carrying of thematerials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

28 Set

14

Spike earthing 20mm dia as per technical specification, approveddrawings and scope of work for single pole, including carrying ofthe materials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

74 Nos.

15

Erection of anti climbing devices viz barbed wires on polestructures in helical form(1.5kg per pole), including carrying ofthe materials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

147 Nos.

16

Danger Plate(57/1988), on single/double pole structure at a heightof 4mtr from the GL.including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Eng-In-Charge.

102 Nos.

71

17

P.G.Clamps, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Eng-In-Charge. (for Weasel & Rabbitconductor)

85 Nos.

18

Fixing of Cross bracing, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Eng-In-Charge.

872 Nos.

19Supply of Nuts & Bolts including washer as reqired Properlygalvanised as per I.S for Erection of 11 KV Line through weaselconductor (6/1/2.59 mm) on PCC & Steel Pole

170 Kg

SL No.

Description of materials Quantity Unit Rate (in Rs.) Amount (in Rs.)

1

9 M long Steel Tubular poles of Designation 410 SP 32 (IS 2713,Pt I, II, III 1980) with base plate direct in earth includingexcavation, refilling and ramming etc. as required (1/6th length ofthe pole to be embedded in earth) and grouting with CC of ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.nominal size) i/c supply of cement, sand and brick aggregatecomplete with excavation, refilling of earth, ramming alongwithcentering and shuttering as required (@ 0.273 Cum per SteelTubular Pole as per TSECL specification ) etc. and applying paintswith ready mixed primer (two or more coats) and alluminium paintof approved quality to give an even shade etc, including carryingof the materials from Gomati RE-DDUGJY Store yard to work siteby mechanical transport/hand cart/manual carrying includingloading, unloading and stacking as required, as per direction ofEng-In-Charge.

8 Nos.

Distribution Transformer with all accessories as per as pertechnical specification, approved drawings and scope of work,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

a) Distribution Transformer, 1- Phase 10 KVA, 11/0.250 KV 4 Nos.

3

M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. includingfastened with galvanised Clamps and Nuts & Bolts etc. asrequired, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Eng-In-Charge.

12 Nos.

4

M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-armincluding duly galvanised as per relevant I.S. including fastenedwith galvanised Clamps and Nuts & Bolts etc. as required,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

20 Nos.

TOTALE(1). ERECTION CHARGE FOR INSTALLATION OF 10 KVA 1-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE .

Erection of Materials Including Carrying.

2

72

5

M.S. angle of size 65x65x6mm for 2.8 mtr long cross-armincluding duly galvanised as per relevant I.S. including fastenedwith galvanised Clamps and Nuts & Bolts etc. as required,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

20 Nos.

6

M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm including duly galvanised as per relevant I.S. for DT Baseincluding fastened with galvanised Clamps and Nuts & Bolts etc.as required, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Eng-In-Charge.

8 Nos.

7

Galvanised Stay set complete with rod, plate , straining screw,thimble, guy insulator as per IS specification including fastenedwith hot dip (heavy duty) galvanized stranded wire of size 7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supplyof cement, sand and brick aggregate complete with excavation,refilling of earth, ramming alongwith centering and shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL specification),including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

16 Set

Insulators with hardware fittings, hardware etc as required as pertechnical specification, approved drawings and scope of work,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

a) 11KV Polymeric Disc insulator with Hardware fitting , 12 Set

b) 11KV Polymeric Pin insulator 12 Set

9

ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,binding materials etc as required as per technical specification,approved drawings and scope of work, including carrying of thematerials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

0.2 KM

10

40 mm dia., 2500 mm long GI pipe earth electrode with test link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt andother accessories complete as per technical specification, approveddrawings and scope of work, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Eng-In-Charge.

16 Set

11

Erection of anti climbing devices viz barbed wires on polestructures including supply of barbed wires in helical form(1.5kgper pole), including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Eng-In-Charge.

8 Nos.

8

73

12

Danger Plate(57/1988), on single/double pole structure at a heightof 4mtr from the GL.including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Eng-In-Charge.

8 Nos.

13

11 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, GangOperated, AB Switch along with Support Insulators, BaseChannel down Pipe, Arcing Horns etc. complete as as pertechnical specifications, scope of works and approved drawings,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

4 Set

14

11KV, 2 pole, HG fuse (D.O. Fuse Unit) set for 1-ph DTs as pertechnical specification, approved drawings and scope of work,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

4 Set

15

Distribution Class 11KV Polimeric Lightening Arrester for DT asper technical specification, approved drawings and scope of work,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Eng-In-Charge.

12 Nos.

16

C' Type cross-arm for 3 wire LT Circuit (65x65x6mm M.S.Angle), including fastened with galvanised Clamps and Nuts &Bolts etc. as required,including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

8 Nos.

17

Straining screw holding of DT, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

8 Nos.

18

L.T. Shackle Insulator, with GI Clamps and required assorted nutsand bolts, washers etc, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

24 Nos.

PVC insulated, PVC sheathed, Aluminium Conductor, Stranded,unarmoured cable for connection of transformer LV bushing toDistribution Box as per Scope of work, technical specification andapproved drawings, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

1C X 35 sqm aluminium conductor cable for Single Phase 10KVA Distribution Transformer

120 Mtr

19

74

20

LT cut(32Amps) out mechanism of single circuit rewireableporcelain Kit-kat fuse unit of 500V grade as per relevant ISspecification to be fastened on wooden plank including Supply &erection of wooden plank (preferably karai wood) of size 12" X10" X 1.5" for fixing of cut outs with Nuts & bolts as required tobe erected on the steel tubular/ PCC pole as per direction ofEngineer-in-charge and including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

4 Nos.

21

Bimetallic Lugs (35 sqmm.) for L.T. Bushing, including carryingof the materials from Gomati RE-DDUGJY Store yard to work siteby mechanical transport/hand cart/manual carrying includingloading, unloading and stacking as required, as per direction ofEngg-In-Charge.

16 Nos.

22

P.G. Clamp, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

12 Nos.

23Pole/DT numbering with Black Colour on yelow shade as requireddigit as per direction of Engg-In-Charge.

8 Nos.

24Supply of Nuts & Bolts including washer as reqired Properlygalvanised as per I.S for installation of 10 KVA DistributionTransformers

60 Kg

25 Supply of Bimetalic Lugs- 35Sq.mm 16 Nos.

26Supply of 32Amps Cut out of 500V grade as per relevant ISspecification

4 Nos.

SL No.

Description of materials Quantity Unit Rate (in Rs.) Amount (in Rs.)

1

9 M long Steel Tubular poles of Designation 410 SP 32 (IS 2713,Pt I, II, III 1980) with base plate direct in earth includingexcavation, refilling and ramming etc. as required (1/6th length ofthe pole to be embedded in earth) and grouting with CC of ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.nominal size) i/c supply of cement, sand and brick aggregatecomplete with excavation, refilling of earth, ramming alongwithcentering and shuttering as required (@ 0.273 Cum per SteelTubular Pole as per TSECL specification ) etc. and applying paintswith ready mixed primer (two or more coats) and alluminium paintof approved quality to give an even shade etc. as required as perdirection of Eng-In-Charge, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

8 Nos.

Distribution Transformer with all accessories as per as pertechnical specification, approved drawings and scope of work,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

a) Distribution Transformer, 1- Phase 16 KVA, 11/0.250 KV 4 Nos.

TOTAL

E(2). ERECTION CHARGE FOR INSTALLATION OF 16KVA 1-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE .

Erection of Materials Including Carrying.

2

75

3

M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. includingfastened with galvanised Clamps and Nuts & Bolts etc. asrequired, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

12 Nos.

4

M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-armincluding duly galvanised as per relevant I.S. including fastenedwith galvanised Clamps and Nuts & Bolts etc. as required,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

20 Nos.

5

M.S. angle of size 65x65x6mm for 2.8 mtr long cross-armincluding duly galvanised as per relevant I.S. including fastenedwith galvanised Clamps and Nuts & Bolts etc. as required,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

4 Nos.

6

M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm including duly galvanised as per relevant I.S. for DT Baseincluding fastened with galvanised Clamps and Nuts & Bolts etc.as required, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

8 Nos.

7

Galvanised Stay set complete with rod, plate , straining screw,thimble, guy insulator as per IS specification including fastenedwith hot dip (heavy duty) galvanized stranded wire of size 7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supplyof cement, sand and brick aggregate complete with excavation,refilling of earth, ramming alongwith centering and shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL specification),including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

16 Set

Polymeric Insulators with hardware fittings, hardware etc asrequired as per technical specification, approved drawings andscope of work, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

a) 11KV Polymeric Disc insulator with Hardware fitting 12 Set

b) 11KV Plymerci Pin insulator 12 Set

9

ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,binding materials etc as required as per technical specification,approved drawings and scope of work, including carrying of thematerials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Engg-In-Charge.

0.2 KM

8

76

10

40 mm dia., 2500 mm long GI pipe earth electrode with test link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt andother accessories complete as per technical specification, approveddrawings and scope of work, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

16 Set

11

Erection of anti climbing devices viz barbed wires on polestructures in helical form(1.5kg per pole), including carrying ofthe materials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Eng-In-Charge.

8 Nos.

12

Danger Plate(57/1988), on single/double pole structure at a heightof 4mtr from the GL.including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

8 Nos.

13

11 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, GangOperated, AB Switch along with Support Insulators, BaseChannel down Pipe, Arcing Horns etc. complete as as pertechnical specifications, scope of works and approved drawings,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

4 Set

14

11KV, 2 pole, HG fuse (D.O. Fuse Unit) set for 1-ph DTs as pertechnical specification, approved drawings and scope of work,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

4 Set

15

Distribution Class 11KV Polymeric Lightening Arrester for DT asper technical specification, approved drawings and scope of work,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

12 Nos.

16

C' Type cross-arm for 3 wire LT Circuit (65x65x6mm M.S.Angle),including fastened with galvanised Clamps and Nuts &Bolts etc. as required, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

8 Nos.

17

Straining screw holding of DT, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

8 Nos.

18

L.T. Shackle Insulator, with GI "U" Clamps and required assortednuts and bolts, washers etc, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

24 Nos.

77

PVC insulated, PVC sheathed, Aluminium Conductor, Stranded,unarmoured cable for connection of transformer LV bushing toDistribution Box as per Scope of work, technical specification andapproved drawings, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

1C X 35 sqm aluminium conductor cable for Single Phase 16KVA Distribution Transformer

120 Mtr

20

LT cut(32Amps) out mechanism of single circuit rewireableporcelain Kit-kat fuse unit of 500V grade as per relevant ISspecification to be fastened on wooden plank including Supply &erection of wooden plank (preferably karai wood) of size 12" X10" X 1.5" for fixing of cut outs with Nuts & bolts as required tobe erected on the steel tubular/ PCC pole as per direction ofEngineer-in-charge and including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

4 Set

21

Bimetallic Lugs (35 sqmm.) for L.T. Bushing, including carryingof the materials from Gomati RE-DDUGJY Store yard to work siteby mechanical transport/hand cart/manual carrying includingloading, unloading and stacking as required, as per direction ofEngg-In-Charge.

16 Nos.

22

P.G. Clamp, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

12 Nos.

23 Pole/DT numbering with Black Colour on yelow shade as requireddigit as per direction of Engg-In-Charge.

8 Nos.

24Supply of Nuts & Bolts including washer as reqired Properlygalvanised as per I.S for installation of 16 KVA DistributionTransformers

60 Kg

25 Supply of Bimetalic Lugs- 35 Sq.mm 16 Nos.

26Supply of 32 Amps. Cut out of 500V grade as per relevant ISspecification

4 Nos.

SL No.

Description of materials Quantity Unit Rate (in Rs.) Amount (in Rs.)

1

9 M long Steel Tubular poles of Designation 410 SP 32 (IS 2713,Pt I, II, III 1980) with base plate direct in earth includingexcavation, refilling and ramming etc. as required (1/6th length ofthe pole to be embedded in earth) and grouting with CC of ratio1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm.nominal size) i/c supply of cement, sand and brick aggregatecomplete with excavation, refilling of earth, ramming alongwithcentering and shuttering as required (@ 0.273 Cum per SteelTubular Pole as per TSECL specification ) etc. and applying paintswith ready mixed primer (two or more coats) and alluminium paintof approved quality to give an even shade etc. as required as perdirection of Eng-In-Charge, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

2 Nos.

19

TOTAL

E(3). ERECTION CHARGE FOR INSTALLATION OF 25 KVA 3-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE .

Erection of Materials Including Carrying.

78

Distribution Transformer with all accessories as per technicalspecification, approved drawings and scope of work, includingcarrying of the materials from Gomati RE-DDUGJY Store yard towork site by mechanical transport/hand cart/manual carryingincluding loading, unloading and stacking as required, as perdirection of Engg-In-Charge.

a) Distribution Transformer, 3- Phase 25 KVA, 11/0.250 KV 1 Nos.

3

M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. includingfastened with galvanised Clamps and Nuts & Bolts etc. asrequired, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

3 Nos.

4

M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-armincluding duly galvanised as per relevant I.S. including fastenedwith galvanised Clamps and Nuts & Bolts etc. as required,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

5 Nos.

5

M.S. angle of size 65x65x6mm for 2.8 mtr long cross-armincluding duly galvanised as per relevant I.S. including fastenedwith galvanised Clamps and Nuts & Bolts etc. as required,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

1 Nos.

6

M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm including duly galvanised as per relevant I.S. for DT Baseincluding fastened with galvanised Clamps and Nuts & Bolts etc.as required, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

2 Nos.

7

Galvanised Stay set complete with rod, plate , straining screw,thimble, guy insulator as per IS specification including fastenedwith hot dip (heavy duty) galvanized stranded wire of size 7/2.50mm. alongwith stay clamps, Nuts & Bolts etc. as required andGrouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 riversand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supplyof cement, sand and brick aggregate complete with excavation,refilling of earth, ramming alongwith centering and shuttering asrequired ( @ 0.119 Cum per stay set as per TSECL specification),including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

4 Set

Polymeric Insulators with hardware fittings, hardware etc asrequired as per technical specification, approved drawings andscope of work, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

a) 11KV Polymeric Disc insulator with Hardware fitting 3 Set

b) 11KV Polymeric Pin insulator 3 Set

2

8

79

9

ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves,binding materials etc as required as per technical specification,approved drawings and scope of work, including carrying of thematerials from Gomati RE-DDUGJY Store yard to work site bymechanical transport/hand cart/manual carrying including loading,unloading and stacking as required, as per direction of Engg-In-Charge.

0.05 KM

10

40 mm dia., 2500 mm long GI pipe earth electrode with test link,RCC pit, RCC cover, placed on GI frame, Charcoal, Salt andother accessories complete as per technical specification, approveddrawings and scope of work, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

4 Set

11

Erection of anti climbing devices viz barbed wires on polestructures including supply of barbed wires in helical form(1.5kgper pole), including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Eng-In-Charge.

2 Nos.

12

Danger Plate(57/1988), on single/double pole structure at a heightof 4mtr from the GL.including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

2 Nos.

13

11 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, GangOperated, AB Switch along with Support Insulators, BaseChannel down Pipe, Arcing Horns etc. complete as as pertechnical specifications, scope of works and approved drawings,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

1 Set

14

11KV, 3 pole, HG fuse (D.O. Fuse Unit) set for 3-ph DTs as pertechnical specification, approved drawings and scope of work,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

1 Set

15

Distribution Class 11KV Lightening Arrester for DT as pertechnical specification, approved drawings and scope of work,including carrying of the materials from Gomati RE-DDUGJYStore yard to work site by mechanical transport/hand cart/manualcarrying including loading, unloading and stacking as required, asper direction of Engg-In-Charge.

3 Nos.

16

C' Type cross-arm for 5 wire LT Circuit (65x65x6mm M.S.Angle), including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

2 Nos.

17

Straining screw holding of DT, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

2 Nos.

80

18

L.T. Shackle Insulator,with GI "U" Clamps and required assortednuts and bolts, washers etc, including carrying of the materialsfrom Gomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

8 Nos.

PVC insulated, PVC sheathed, Aluminium Conductor, Stranded,unarmoured cable for connection of transformer LV bushing toDistribution Box as per Scope of work, technical specification andapproved drawings, including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

1C X 70 sqm aluminium conductor cable for 3- Phase 25 KVADistribution Transformer

60 Mtr

20

LT cut(63Amps) out mechanism of single circuit rewireableporcelain Kit-kat fuse unit of 500V grade as per relevant ISspecification to be fastened on wooden plank including Supply &erection of wooden plank (preferably karai wood) of size 24" X12" X 1.5" for fixing of cut outs with Nuts & bolts as required tobe erected on the steel tubular/ PCC pole as per direction ofEngineer-in-charge and including carrying of the materials fromGomati RE-DDUGJY Store yard to work site by mechanicaltransport/hand cart/manual carrying including loading, unloadingand stacking as required, as per direction of Engg-In-Charge.

6 Nos.

21

Bimetallic Lugs (70 sqmm.) for L.T. Bushing, including carryingof the materials from Gomati RE-DDUGJY Store yard to work siteby mechanical transport/hand cart/manual carrying includingloading, unloading and stacking as required, as per direction ofEngg-In-Charge.

23 Nos.

22

P.G. Clamp, including carrying of the materials from Gomati RE-DDUGJY Store yard to work site by mechanical transport/handcart/manual carrying including loading, unloading and stacking asrequired, as per direction of Engg-In-Charge.

3 Nos.

23 Pole/DT numbering with Black Colour on yelow shade as requireddigit as per direction of Engg-In-Charge.

2 Nos.

24 Supply of Bimetalic Lugs- 70 Sq.mm 23 Nos.

25 Supply of 63 Amps. Cut out of 500V grade as per relevant ISspecification

6 Nos.

26Supply of Nuts & Bolts including washer as reqired Properlygalvanised as per I.S for installation of 25 KVA DistributionTransformers

15 Kg

SL No.

ITEM DESCRIPTION Unit QNTYValue Price

(Rs)Total (Rs)

1 Supply of WOODEN METER BOARD (14X12) inchs Nos 385

2Supply of WOODEN BOARD FOR SWITCH & LAMP HOLDER(6X4) Inchs

Nos 385

3 Supply of 16 AMP ICDP MAIN SWITCH AS PER ISI Nos 385

4 Supply of 5A PIANO SWITCH ISI Nos 385

5 Supply of BATTEN HOLDER ISI Nos 385

6Supply of EARTHING BOLT OF SIZE M 10 x 50mm WITHNUTS & BOLTS

Nos 385

7 Supply of PVC PIPE 20 mm DIA ISI Mtrs. 1155

8 Supply of PVC SADDLE Nos 1540

19

TOTAL

(F) Estimate for BPL Connection

81

9 Supply of SINGLE CORE 1.5 sq.mm. COPPER CABLE Mtr. 1925

10 Supply of REEL INSULATOR Nos 15400

11 Supply of EARTH SPIKE (1.80 Mtr X20 mm) Nos 385

12 Supply of 7 WATT PIN TYPE LED LAMP (710 LUMENS) Nos 385

13 Supply of Screw of different sizes LS 385

14

Erection of SINGLE PHASE (5-30A) STATIC ENERGY METEROF CLASS 1.0 ACCURACY ELECTRONIC ENERGY METERALONG WITH METER BOX AS PER TS OF TSECL (TSECLSupply)

Nos 385

15Erection of PVC CABLE OF SIZE 2.5 SQMM SINGLE COREALUMINIUM CONDUCTOR (TSECL Supply)

Mtr 23100

16 Erection of 8 SWG GI WIRE FOR EARTHING (TSECL Supply) KG 770

17 10 SWG GI WIRE (TSECL Supply) KG 770

18 Erection Price No. 385 TOTAL

82

Sheet1

Sheet2

LT AB CABLES (2)

A. LABOUR SCHEDULE FOR DRAWAL OF LT AB CABLE (3X50+1X35SQMM) FOR 9.61 K.M

Erection of Materials

SL NO.DESCRIPTION OF ITEMUNITQTY.RATE(in Rs)AMOUNT

1Survey of L & MV lineKM9.61154614,857.06

28 Mtr. Long 200 Kgs. P.C.C. Pole with R.C.C. Base Plate /Pad in earth including excavation,refilling and ramming etc. as required ( 1/6th length of the pole to be embeded in earth)NO.125800100,000.00

38 Mtr. Long S.T. Pole of Designation 410SP-15(IS 2713,PtI,II,III,1980) with base plate direct in earth including excavation ,refilling and ramming etc, as required (1/6th length of the pole to be embeded in earth ) and grouting with CC of ratio 1:2:4 (1 Cement, 2 River Sand and 4 jhamabrick aggregate of 20 mm nominal size) including supply of cement,aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required @ 0.273 Cum per S.T. Pole as per TSECL specification )etc. and applying paints with ready mixed primer (2 or more Coats ) and almunium paints of approved quality to give an even shade etc, as required as per direction Engineer in- ChargeNO1151900218,500.00

4Stringing & sagging of 1.1 K.V. L.T. AB Cable on P.C.C. pole average span of 25 m to 40 m with fixing of Nylon Cable tie to be tied every 2 mtr interval of AB Cable with fixing of End caps at all open ends of AB Cable 3x50+1x35 sqmm( insulated messanger) AB CableKM9.6126000249,860.00

5Erection of anchor Clamp suitable for AB Cable of 35/50 sq.mm. insulated Massenger , including errection of G.I. Pole clamp, G.I. Flat type Eye HookNO.14414020,160.00

6Erection of Suspension clamp suitable for.insulated Massenger, including errection of G.I. Pole clamp, G.I. Flat type Eye HookNO.24014033,600.00

7Erection of insulating Piercing connectors for connection of Distribution Boxes including connection with AB CableNO.11532933,437.00

8Erection of Insulating Piercing Connectors for ABC tee Connection including Connection with AB CableNO.240296,960.00

9Erection of distribution box on pole by 2 Nos Steel strap & buckles / G.I. ClampNO.240456109,440.00

10Erection of preinstalled Water proof crymping type sleeves for Straight through jointsNO.29962,784.00

11Erection of Bimetalic Crymping Type Waterproof lug for 16/50/70/35mm L.T. Power cables (1 set=4 Nos.)NO.20531,060.00

12Erection of L.T.Stay set completewith rod, plate, straining screw thimble guy insulator as per IS specification including fastened with hot dip (heavy duty galvanised stranded wire of size 7/2.50mm alongwith stay clamps ,Nuts & bolts etc. as required and grounding stay set with CC of ratio 1:2:4 (1 Cement,2 Riversand 4 jhamabrick aggregate of 20mm nominal size )i/c supply of cement ,sand and brick aggregate complete with excavation , refilling of earth ramming alongwith centering and shuttering as required (@ 0.119Cu.m per stay set as per TSECL specificationNO.77590.7745,489.29

13Numbering of P.C.C. PoleNO.240358,400.00

Total844,547.35

ABSTRACT OF COST

SINGLE PHASE LV LINE ON PCC & STEEL POLE WITH AB CABLE FOR 9.61 KM

SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.

1ERECTION CHARGES844,547.35

2SERVICE TAX @14.5%122459.36575

Total Rs967,006.72

Say Rs967,007.00

B.ERECTION CHARGE FOR CONSTRUCTION OF 1 PHASE - 2 WIRE L.T . LINE ON 8 Mtr. PCC/S.T. POLE WITH ACSR (6/1/2.59 MM) AT DISTRICT UNOKOTI (CHANDIPUR BLOCK) RL-24.74 KM

Erection of Materials

SL NO.Description of itemQuantityUnitUnit Rate in Rs.Amount in Rs.

18 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth)322NO.1335.6430063.2

28 M long Steel Tubular poles of Designation 410 SP 15 (IS 2713, Pt I, II, III 1980) with base plate direct in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth) and grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.273 Cum per Steel Tubular Pole as per TSECL specification ) etc. and applying paints with ready mixed primer (two or more coats) and alluminium paint of approved quality to give an even shade etc. as required as per direction of Eng-In-Charge.297No.999.93296979.21

3Galvanised Stay set complete with rod, plate , straining screw, thimble, guy insulator as per IS specification including fastened with hot dip (heavy duty) galvanized stranded wire of size 7/2.50 mm. alongwith stay clamps, Nuts & Bolts etc. as required and Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required ( @ 0.119 Cum per stay set as per TSECL specification).297Set590.77175458.69

4ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work24.74KM2837.9770211.3778

58 SWG GI Wire for continuous earthing of L.T. Line, as per technical specification, approved drawings and scope of work including craddle gaurding32162KG7.42238642.04

6Barbed wire for anti-climbing device619KG29.1518043.85

7L.T Shackle insulator (4/1972)1238No.24.5630405.28

840 mm dia., 3000 mm long GI pipe earth electrode with test link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and other accessories complete as per technical specifications for LT Overhead line's every 6th pole earthing and line structure earthing as per approved drawings, specification and scope of work.124Set1226.07152032.68

9Spike earthing 20mm dia as per technical specification, approved drawings and scope of work.0No.00

10"U" Clamp (made of 50 x 6 mm M.S. Flat) duly galvanised as per relevant I.S.619No.31.819684.2

11C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle) including fastened with galvanised Clamps and Nuts & Bolts etc. as required.619No.92.5757300.83

12L.T Danger Plate(57/1988)619No.21.9113562.29

13Reel Insulator1238No.8.1310064.94

14Pole numbering with Black Colour on yelow shade as required digit as per direction of Engg-In-Charge.619No.3521665

Total1534113.5878

ABSTRACT OF COST

SINGLE PHASE LV LINE ON PCC & STEEL POLE WITH ACSR (6/1/2.59mm) FOR 24.74 KM

SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.

1ERECTION CHARGES1534113.5878

2SERVICE TAX @14.5%222446.470231

Total Rs1756560.058031

Say Rs1,756,560

C. ERECTION CHARGE FOR CONSTRUCTION OF 3-PHASE -4-WIRE LT LINE 5.42 KM ON 8 Mtr. PCC/ S.T. POLE WITH ACSR CONDUCTOR (6/1/2.59MM) AT CHANDI BLOCK DISTRICT UNOKOTI

Erection of Materials

SL NO.Description of itemQuantityUnitUnit Rate in Rs.Amount in Rs.

18 Mtr. Long 200 Kgs PCC pole with RCC Base plate/pad in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth)71NO.80056800

28 M long Steel Tubular poles of Designation 410 SP 15 (IS 2713, Pt I, II, III 1980) with base plate direct in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth) and grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.273 Cum per Steel Tubular Pole as per TSECL specification ) etc. and applying paints with ready mixed primer (two or more coats) and alluminium paint of approved quality to give an even shade etc. as required as per direction of Eng-In-Charge.65No.1900123500

3Galvanised Stay set complete with rod, plate , straining screw, thimble, guy insulator as per IS specification including fastened with hot dip (heavy duty) galvanized stranded wire of size 7/2.50 mm. alongwith stay clamps, Nuts & Bolts etc. as required and Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required ( @ 0.119 Cum per stay set as per TSECL specification).65Set590.7738400.05

4ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work5.42KM2837.9715381.7974

58 SWG GI Wire for continuous earthing of L.T. Line, as per technical specification, approved drawings and scope of work including craddle gaurding705KG7.425231.1

6Barbed wire for anti-climbing device136KG29.153964.4

7L.T Shackle insulator (4/1972)544No.24.5613360.64

840 mm dia., 3000 mm long GI pipe earth electrode with test link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and other accessories complete as per technical specifications for LT Overhead line's every 6th pole earthing and line structure earthing as per approved drawings, specification and scope of work.27Set250067500

9Spike earthing 20mm dia as per technical specification, approved drawings and scope of work.0No.00

10"U" Clamp (made of 50 x 6 mm M.S. Flat) duly galvanised as per relevant I.S.136No.31.84324.8

11C' Type cross-arm for 3 wire (65x65x6mm M.S. Angle) including fastened with galvanised Clamps and Nuts & Bolts etc. as required.136No.92.5712589.52

12L.T Danger Plate(57/1988)136No.21.912979.76

13Reel Insulator272No.8.132211.36

14Pole numbering with Black Colour on yelow shade as required digit as per direction of Engg-In-Charge.136No.354760

Total351003.4274

ABSTRACT OF COST

THREE PHASE LV LINE ON PCC & STEEL POLE WITH ACSR (6/1/2.59 mm) FOR 5.42 KM

SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.

1ERECTION CHARGES351003.4274

2SERVICE TAX @14.5%50895.496973

Total Rs401898.924373

Say Rs401899

D. ERECTION CHARGE FOR 3 PHASE 11KV LINE ON P.C.C. & STEEL POLE RL-15.58KM WITH ACSR WEASEL AND RABBIT CONDUCTOR AT UNAKOTI DISTRICT (CHANDIPUR BLOCK)

Erection Charge

RATE FOR 15.58 KM HT LINE

SL No.Description of materialsQuantityUnitRate (in Rs.)Amount (in Rs.)

19 Mtr./200 Kgs PCC pole with RCC Base plate/pad268No.37099160

29 M long Steel Tubular poles with welded steel base plate of Designation 540 SP 52 (IS 2713, Pt I, II, III 1980)110No.1217133870

3Cross arms made of 100 x 50 x 50 x 6 mm M.S. Channel duly galvanised as per relevant I.S.0

(a) Single pole top bracket 0.3 mtr. Long217No.255425

b) Double pole cross-arm 2.20 mtr. Long80No.504000

4V-cross-arm made of 75x40x40x6 mm Ms channel duly galvanised as per relevant I.S.217No.5010850

5Single Pole protective guard bracket 1.6mtr. Long by 65x65x6 mm M.S.Angle duly galvanised as per relevant I.S.205No.326560

6Double pole guard bracket, 2.5 mtr. Long by 65x65x6mm M.S. Angle duly galvanised as per relevant I.S.94No.504700

7Double Pole Cross bracing made of 65 x 65 x 6 mm M.S. Angle duly galvanised as per relevant I.S.0

a) 1.8 mtr long for horizontal bracing161No.508050

(b) 3.2 mtr long for cross bracing161No.0

8Cross-arm clamp made of 50x6mm, M.S. Flat duly galvanised as per relevant I.S.3No.0

9Stay clamp made of 50x6mm, M.S.Flat duly galvanised as per relevant I.S.204No.0

10Galvanised Stay set complete with rod, plate & straining screw.204Set307.4662721.84

11G.I. Stranded wire (7/3.15 mm) for Stay Set1021KG0

1211 KV 45 KN Disc Insulator with hardware fittings520Set4020800

1311KV Pin insulator with G.I. pin.850Set2521250

14H.T. Stay Guy Insulator.0No.00

15a) ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work. b) ACSR Conductors (6/1/3.35mm) Rabbitl with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work.16KM225036000

168 SWG GI Wire for continuous earthing of 11 KV Line, as per technical specification, approved drawings and scope of work.0KM4900

1740 mm dia., 3000 mm long GI pipe earth electrode with test link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and other accessories complete as per technical specification, approved drawings and scope of work.79Set2650209350

18Spike earthing 20mm dia as per technical specification, approved drawings and scope of work.220No.10022000

19Barbed wire for anticlimbing device.402KG156030

2011 kv Danger plate.299No.82392

21Nuts & Bolts ( Assorted size)6300

22P.G.Clamps.a)FOR 30 SQ.MM. CONDUCTOR b)FOR 50 SQ,MM. CONDUCTOR236No.37.58850

23Craddle Gaurding299No.15847242

24Fixing of Cross lacing2392No.1331096

TOTAL740346.84

ABSTRACT OF COST

3 PHASE 11KV LINE ON PCC & STEEL POLE (PCC Pole : Steel Pole :: 70:30) WITH ACSR (6/1/2.59 MM) CONDUCTOR AT CHANDIPUR BLOCK OF UNOKOTI DISTRICT

SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.

1ERECTION CHARGES740346.84

2SERVICE TAX @14.5%107350.2918

Total Rs847697.1318

Say Rs847698

E. ERECTION CHARGE FOR INSTALLATION OF 10 KVA 1-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE AT UNAKOTI (CHANDIPUR BLOCK)

Erection of Materials

FOR 19 DTR S/S

SL No.Description of materialsQuantityUnitRate (in Rs.)Amount (in Rs.)

19 M long Steel Tubular poles of Designation 410 SP 32 (IS 2713, Pt I, II, III 1980) with base plate direct in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth) and grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.273 Cum per Steel Tubular Pole as per TSECL specification ) etc. and applying paints with ready mixed primer (two or more coats) and alluminium paint of approved quality to give an even shade etc. as required as per direction of Eng-In-Charge.38No.121746246

2Distribution Transformer with all accessories as per as per technical specification, approved drawings and scope of work.0

a) Distribution Transformer, 1- Phase 10 KVA, 11/0.250 KV19No.5009500

3M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. including fastened with galvanised Clamps and Nuts & Bolts etc. as required.57No.603420

4M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. including fastened with galvanised Clamps and Nuts & Bolts etc. as required.95No.504750

5M.S. angle of size 65x65x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. including fastened with galvanised Clamps and Nuts & Bolts etc. as required.95No.504750

6M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm including duly galvanised as per relevant I.S. for DT Base including fastened with galvanised Clamps and Nuts & Bolts etc. as required.38No.351330

7Galvanised Stay set complete with rod, plate , straining screw, thimble, guy insulator as per IS specification including fastened with hot dip (heavy duty) galvanized stranded wire of size 7/2.50 mm. alongwith stay clamps, Nuts & Bolts etc. as required and Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required ( @ 0.119 Cum per stay set as per TSECL specification).76Set307.4623366.96

8Insulators with hardware fittings, hardware etc as required as per technical specification, approved drawings and scope of work.0

a) 11KV Disc insulator with Hardware fitting114Set252850

b) 11KV Pin insulator with Hardware fitting114Set404560

9ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work.6.36KM0

108 SWG GI Wire for continuous earthing of 11 KV Line, as per technical specification, approved drawings and scope of work including craddle gaurding1590KG0

1140 mm dia., 3000 mm long GI pipe earth electrode with test link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and other accessories complete as per technical specification, approved drawings and scope of work.76Set2500190000

12Barbed wire for anti climbing device38KG34.451309.1

13Danger plate for 11 KV S/S38No.8304

1411 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns etc. complete as as per technical specifications, scope of works and approved drawings19Set4558645

1511KV, 2 pole, HG fuse (D.O. Fuse Unit) set for 1-ph DTs as per technical specification, approved drawings and scope of work.19Set1903610

16Distribution Class 11KV Lightening Arrester for DT as per technical specification, approved drawings and scope of work57No.653705

17C' Type cross-arm for 3 wire LT Circuit (65x65x6mm M.S. Angle)38No.25950

18Straining screw holding of DT38No.32.861248.68

19L.T. Shackle Insulator114No.121368

20"U" clamp (made of 50x6mm M.S. flat) duly galvanised as per relevant I.S.114No.121368

21PVC insulated, PVC sheathed, Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box as per Scope of work, technical specification and approved drawings:0

1C X 35 sqm aluminium conductor cable for Single Phase 10 KVA Distribution Transformer570Mtr16.789564.6

22LT cut out mechanism as per scope of the work, technical specifications and approved drawings suitable for single Phase Distribution Transformer: (Including supply of wooden plank)57Set55031350

23Single Phase D T Metering19No.2003800

24Bimetallic Lugs (35 sqmm.) for L.T. Bushing76No.16.071221.32

25P.G. Clamp57No.29.331671.81

26Pole numbering with Black Colour on yelow shade as required digit as per direction of Engg-In-Charge.38No.501900

TOTAL362788.47

ABSTRACT OF COST

INSTALLATION OF 19 NOS 10 KVA 1-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE

SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.

1ERECTION CHARGES362788.47

2SERVICE TAX @14.5%52604.32815

Total Rs415392.79815

Say Rs415393

Supply of 1-phase 2-wire CT operated fully static AMR compatable Tri-vactor energy Meter of accuracy class 0.58 suitable for operation at LT level for 10 KVA DT as per Draft Indian Companion Standard equivalent to IEC-62056 protocol and DLMS compliant (with upto date Amendment ) i/c Meter Housing Box for DT Metering made of Thermo-plastic known FRPP or MRPP and as per the direction of engineer -in-charge.

F. ERECTION CHARGE FOR INSTALLATION OF 16KVA 1-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE AT DISTRICT UNAKOTI (CHANDIPUR)

Erection of Materials

FOR 6NOS OF DTR S/S

SL No.Description of materialsQuantityUnitRate (in Rs.)Amount (in Rs.)

19 M long Steel Tubular poles of Designation 410 SP 32 (IS 2713, Pt I, II, III 1980) with base plate direct in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth) and grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.273 Cum per Steel Tubular Pole as per TSECL specification ) etc. and applying paints with ready mixed primer (two or more coats) and alluminium paint of approved quality to give an even shade etc. as required as per direction of Eng-In-Charge.12No.121714604

2Distribution Transformer with all accessories as per as per technical specification, approved drawings and scope of work.0

a) Distribution Transformer, 1- Phase 16 KVA, 11/0.250 KV6No.5003000

3M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. including fastened with galvanised Clamps and Nuts & Bolts etc. as required.18No.601080

4M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. including fastened with galvanised Clamps and Nuts & Bolts etc. as required.30No.501500

5M.S. angle of size 65x65x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. including fastened with galvanised Clamps and Nuts & Bolts etc. as required.6No.50300

6M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm including duly galvanised as per relevant I.S. for DT Base including fastened with galvanised Clamps and Nuts & Bolts etc. as required.12No.35420

7Galvanised Stay set complete with rod, plate , straining screw, thimble, guy insulator as per IS specification including fastened with hot dip (heavy duty) galvanized stranded wire of size 7/2.50 mm. alongwith stay clamps, Nuts & Bolts etc. as required and Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required ( @ 0.119 Cum per stay set as per TSECL specification).24Set307.467379.04

8Insulators with hardware fittings, hardware etc as required as per technical specification, approved drawings and scope of work.0

a) 11KV Disc insulator with Hardware fitting36Set25900

b) 11KV Pin insulator with Hardware fitting36Set401440

9ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work.7.44KM0

108 SWG GI Wire for continuous earthing of 11 KV Line, as per technical specification, approved drawings and scope of work including craddle gaurding1860KG0

1140 mm dia., 3000 mm long GI pipe earth electrode with test link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and other accessories complete as per technical specification, approved drawings and scope of work.24Set250060000

12Barbed wire for anti climbing device12KG34.45413.4

13Danger plate for 11 KV S/S12No.896

1411 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns etc. complete as as per technical specifications, scope of works and approved drawings6Set4552730

1511KV, 2 pole, HG fuse (D.O. Fuse Unit) set for 1-ph DTs as per technical specification, approved drawings and scope of work.6Set1901140

16Distribution Class 11KV Lightening Arrester for DT as per technical specification, approved drawings and scope of work18No.651170

17C' Type cross-arm for 3 wire LT Circuit (65x65x6mm M.S. Angle)12No.25300

18Straining screw holding of DT12No.32.86394.32

19L.T. Shackle Insulator36No.12432

20"U" clamp (made of 50x6mm M.S. flat) duly galvanised as per relevant I.S.36No.12432

21PVC insulated, PVC sheathed, Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box as per Scope of work, technical specification and approved drawings:0

1C X 35 sqm aluminium conductor cable for Single Phase 16 KVA Distribution Transformer180Mtr16.783020.4

22LT cut out mechanism as per scope of the work, technical specifications and approved drawings suitable for single Phase Distribution Transformer.18Set5509900

23Single Phase D T Metering6No.2001200

24Bimetallic Lugs (35 sqmm.) for L.T. Bushing24No.16.07385.68

25P.G. Clamp18No.29.33527.94

26Pole numbering with Black Colour on yelow shade as required digit as per direction of Engg-In-Charge.12No.50600

TOTAL113364.78

ABSTRACT OF COST

INSTALLATION OF 06 NOS 16 KVA 1-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE

SL No.DESCRIPTION OF ITEMSAMOUNT IN RS.

1ERECTION CHARGES113364.78

2SERVICE TAX @14.5%16437.8931

Total Rs129802.6731

Say Rs129803

Supply of 1-phase 2-wire CT operated fully static AMR compatable Tri-vactor energy Meter of accuracy class 0.58 suitable for operation at LT level for 10 KVA DT as per Draft Indian Companion Standard equivalent to IEC-62056 protocol and DLMS compliant (with upto date Amendment ) i/c Meter Housing Box for DT Metering made of Thermo-plastic known FRPP or MRPP and as per the direction of engineer -in-charge.

G. ERECTION CHARGE FOR INSTALLATION OF 25 KVA 3-PHASE DISTRIBUTION SUB_ STATION ON STEEL POLE AT DISTRICT UNAKOTI (CHANDIPUR)

Erection of Materials

FOR 3 NOS OF DTR S/S

SL No.Description of materialsQuantityUnitRate (in Rs.)Amount (in Rs.)

19 M long Steel Tubular poles of Designation 410 SP 32 (IS 2713, Pt I, II, III 1980) with base plate direct in earth including excavation, refilling and ramming etc. as required (1/6th length of the pole to be embedded in earth) and grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.273 Cum per Steel Tubular Pole as per TSECL specification ) etc. and applying paints with ready mixed primer (two or more coats) and alluminium paint of approved quality to give an even shade etc. as required as per direction of Eng-In-Charge.6No.12177302

2Distribution Transformer with all accessories as per technical specification, approved drawings and scope of work.0

a) Distributiob Transformer, 3- Phase 25 KVA, 11/0.250 KV3No.5001500

3M.S. Channel of size 100x50x50x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. including fastened with galvanised Clamps and Nuts & Bolts etc. as required.9No.60540

4M.S. Channel of size 75x40x40x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. including fastened with galvanised Clamps and Nuts & Bolts etc. as required.15No.50750

5M.S. angle of size 65x65x6mm for 2.8 mtr long cross-arm including duly galvanised as per relevant I.S. including fastened with galvanised Clamps and Nuts & Bolts etc. as required.3No.50150

6M.S. Channel of size 100x50x50x6mm for 0.8 mtr long cross-arm including duly galvanised as per relevant I.S. for DT Base including fastened with galvanised Clamps and Nuts & Bolts etc. as required.6No.35210

7Galvanised Stay set complete with rod, plate , straining screw, thimble, guy insulator as per IS specification including fastened with hot dip (heavy duty) galvanized stranded wire of size 7/2.50 mm. alongwith stay clamps, Nuts & Bolts etc. as required and Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) i/c supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required ( @ 0.119 Cum per stay set as per TSECL specification).12Set307.463689.52

8Insulators with hardware fittings, hardware etc as required as per technical specification, approved drawings and scope of work.0

a) 11KV Disc insulator with Hardware fitting18Set25450

b) 11KV Pin insulator with Hardware fitting18Set40720

9ACSR Conductors (6/1/2.59mm) Weasel with Jointing sleeves, binding materials etc as required as per technical specification, approved drawings and scope of work.1KM0

108 SWG GI Wire for continuous earthing of 11 KV Line, as per technical specification, approved drawings and scope of work including craddle gaurding45KG7.42333.9

1140 mm dia., 3000 mm long GI pipe earth electrode with test link, RCC pit, RCC cover, placed on GI frame, Charcoal, Salt and other accessories complete as per technical specification, approved drawings and scope of work.12Set250030000

12Barbed wire for anti climbing device6KG34.45206.7

13Danger plate for 11 KV S/S6No.848

1411 KV, 200A, 3-ph, 3 Pin type, Vertical Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns etc. complete as as per technical specifications, scope of works and approved drawings3Set4551365

1511KV, 3 pole, HG fuse (D.O. Fuse Unit) set for 3-ph DTs as per technical specification, approved drawings and scope of work.3Set190570

16Distribution Class 11KV Lightening Arrester for DT as per technical specification, approved drawings and scope of work9No.65585

17C' Type cross-arm for 5 wire LT Circuit (65x65x6mm M.S. Angle)6No.25150

18Straining screw holding of DT6No.32.86197.16

19L.T. Shackle Insulator24No.12288

20"U" clamp (made of 50x6mm M.S. flat) duly galvanised as per relevant I.S.24No.12288

21PVC insulated, PVC sheathed, Aluminium Conductor, Stranded, unarmoured cable for connection of transformer LV bushing to Distribution Box as per Scope of work, technical specification and approved drawings:0

1C X 35 sqm alumini