PUB

LIC

AU

CT

ION

AMERICAN AUCTIONEERS GROUP1146 N Central Avenue #535Glendale, California 91202Phone: 818-763-2021 Fax: 818-291-9495WWW.AAGAUCTION.COM

AUCTION LOCATION:

AUCTION DATE: TUESDAY NOVEMBER 13, 2018 @ 10:30 am (PST)

AUCTION: TUESDAY NOVEMBER 13, 2018

PUB

LIC

AU

CT

ION

PRISTINE CNC MACHINING

TERMS AND CONDITIONSALL ITEMS ARE SOLD AS-IS / WHERE - IS

NO GUARANTEES, OR WARRANTIES ARE APPLIEDALL ITEMS MUST BE PICKED UP BY

SPECIFIED DATE

PRECISION CNC MACHINING FACILITY

INSPECTION: MORNING OF SALE: FROM 8:00 am to 10:30 am

9990 Indiana Ave. #8Riverside, CA

Acra Turn 16” x 40” Gear-Gap Bed Lathe w/ Newall C80 DRO, 20-1500 RPM, 3” Thru Spindle Bore

2012 Haas VF-2 CNC Vertical Machining Center w/ Haas Controls, 20-ATC, CAT-40 Spindle, 8100 RPM, Rigid Tapping

2012

Nissan KCPH02A25PV 4400 Lb Cap LPG Forklift

Bridgeport Vertical Mill w/ Newall NMS300 DRO, 2Hp, 60-4200 Dial RPM

MUST SEE

AUCTION: TUESDAY NOVEMBER 13, 2018

PRECISION CNC MACHINING FACILITY

CNC Mill :2012 Haas VF-2 CNC Vertical Machining Center s/n 1093217 w/ Haas Controls, 20-Station ATC, CAT-40Taper Spindle, 8100 RPM, Haas Vector Drive, Rigid Tapping, Advanced Tool Management, 34-Position Coolant Spigot, 16” x 36” Table, Coolant.

Lathes :Namsun Hi-Tech Acra Turn 16” x 40” Geared Head Gap Bed Lathe s/n 420102874 w/ Newall C80Programmable DRO, 20-1500 RPM, Inch/mm Threading, Tailstock, Steady Rest, 3” Thru Spindle Bore,KDK Tool Post, 10” 3-Jaw Chuck, 12”4-Jaw Chuck, Coolant.Monarch 19” x 60” Geared Head Lathe w/ 24-1000 RPM, Taper Attachment, Tailstock, Steady Rest, KDK Tool Post, Trava-Dial, 14” 4-Jaw Chuck.

Mills :Bridgeport Vertical Mill s/n 259429 w/ Newall NMS300 Programmable DRO, 2Hp Motor, 60-4200 DialChange RPM, Chrome Ways, Power Feed, 9” x 42” Table.Bridgeport Vertical Mill w/ Newall DP700 Programmable DRO, 1.5Hp Motor, 80-2720 RPM, 8-Speeds, Power Feed, 9” x 42” Table.2004 Maxmill AM-3V Vertical Mill s/n 041902 w/ Newall C80 Programmable DRO, 3Hp Motor, 80-5440 RPM, 16-Speeds, R8 Spindle, Chrome Box Ways, Power Feed, 10” x 54” Table.Maxmill AM-3VF Vertical Mill s/n 041339 w/ Newall C80 Programmable DRO, 3Hp Motor, 80-5440 RPM, 16-Speeds, R8 Spindle, Chrome Box Ways, Power Feed, 10” x 54” Table.Sharp Vertical Mill s/n 84120691 w/ Newall DP700 Programmable DRO, Mitutoyo Digital “Z” Scale, 3Hp Motor, 60-4500 Dial Change RPM, Chrome Ways, Power Feed, 10” x 51” Table.Kearney & Trecker Milwaukee mdl. 310ch Universal Mill s/n 3-8911 w/ 75-1200 Vertical RPM, 15-1500 Horizontal RPM, Universal Vertical Milling Head, 50-Taper Spindles, Box Ways, Power Feeds, 13 ½” x 64”Table, Coolant.

Support Machinery :TOS type DPH-20 8” x 24” Automatic Surface Grinder s/n 401808 w/ Magnetic Chuck, Coolant.Cuttermaster MG-30 Tool and Cutter Grinder s/n 5224 w/ 5C Air Fixture.Baldor Pedestal Carbide Tool Grinder.Ryobi Pedestal Grinder.Shopfox 12” Disc Sander.Acra HBS-712 7” Horizontal Band Saw w/ 4-Speeds, Manual Clamping, Coolant.DeWalt 14” Abrasive Cutoff Saw.Central Hydraulics 12 Ton Hydraulic H-Frame Press.Speedaire 5Hp Vertical Air Compressor w/ 80 Gallon Tank.

Tooling :(27) CAT-40 Taper Tooling, (5) Kurt D688 and D675 6” Angle-Lock Vises, (5) 6” Angle-Lock Vises, Yuasa 8”3-Jaw Indexing Chuck, 8” 3-Jaw Indexing Chuck, 15” Rotary Table, Yuasa 5C Indexing Head, (30) 5C Collets, (50) R8 Collets and Tooling, Angle Plates.

Inspection :Mitutoyo 24” Dial Height Gage, Chaun 0-12” OD Mic Set, Mitutoyo 8”-9”, 7”-8” OD Mics, Chaun 6”-7” OD Mic, Lufkin ID Mic Set, Gage Block Set, Pin Gage Sets .061”-.750”, 24” x 36” x 4” Granite Surface Plate w/ Cabinet Base, Precision 8” x 12” x 3” Granite Surface Plate.

Forklift :Nissan KCPH02A25PV 4400 Lb Cap LPG Forklift s/n KCPH02P903376 w/ 3-Stage Mast, 187” Lift Height, Side Shift, Cushion Tires, 4246 Metered Hours.

Directions : From Orange County, take the 91-FWY East. Exit on Tyler St. and Turn right. Turn left onto Indiana Ave. Look for “Auction Today” signs

2004 Maxmill AM-3V Vertical Mill w/ Newall C80 DRO, 3Hp, 80-5440 RPM **2-AVAILABLE**

TOS DPH-20 8” x 24” Auto Surface Grinder

K &T Milwaukee 310ch Universal Mill

2004

Sharp Vertical Mill w/ Newall DP700 DRO, 3Hp, 60-4500 Dial RPM

Monarch 19” x 60” Geared Head Lathe w/ 24-1000 RPM, Taper Attachment