pratt resume 2016

4
Brandon Pratt 4040 Rosemound Ave Waterford, MI, 48329 Cell (248) 219-7666 [email protected] Objective: Obtain a position as a NACE coating inspector, where I can continue to learn and grow. I am prepared to work land based or off shore as I have obtained a passport and TWIC card. Preparing for my future on my own, I have completed the NACE CIP Level 1Certification with a 92% average, I also have scheduled my NACE 2 CIP for late September of this year. Having a good eye for detail with approximately 4 years of applicator experience I believe with my self-motivation and ability to learn quickly it makes me a prime candidate. Work Experience: Ultimate Corrosion Control Apprentice December 2015- July 2016 Provide quality work in all Surface preparation methods for both Carbon Steel and Concrete surfaces. Daily equipment checks of all blasting and painting equipment and pumps. Troubleshoot and maintenance repair in a timely and effective manner to minimize down time. Load and unload materials or take product inventory. Read and understand all product data sheets and sds for every material on site. Maintain and inspect all personal ppe such as: full face respirator, Blast hood, fall arrest devices, and personnel rescue equipment. Danos Applicator February 2012-August 2015 Provide quality workmanship in all blasting and painting functions Prepare paint and equipment for use Maintenance of tools and equipment Stop production if safety is compromised and discuss solutions Monitor equipment for defects or problems Proven track record of accurately completing research and training

Upload: brandon-pratt

Post on 16-Apr-2017

40 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Pratt Resume 2016

Brandon Pratt4040 Rosemound Ave Waterford, MI, 48329Cell (248) 219-7666

[email protected]

Objective:

Obtain a position as a NACE coating inspector, where I can continue to learn and grow. I am prepared to work land based or off shore as I have obtained a passport and TWIC card. Preparing for my future on my own, I have completed the NACE CIP Level 1Certification with a 92% average, I also have scheduled my NACE 2 CIP for late September of this year. Having a good eye for detail with approximately 4 years of applicator experience I believe with my self-motivation and ability to learn quickly it makes me a prime candidate.

Work Experience:

Ultimate Corrosion Control Apprentice December 2015- July 2016

Provide quality work in all Surface preparation methods for both Carbon Steel and Concrete surfaces. Daily equipment checks of all blasting and painting equipment and pumps. Troubleshoot and maintenance repair in a timely and effective manner to minimize down time. Load and unload materials or take product inventory. Read and understand all product data sheets and sds for every material on site. Maintain and inspect all personal ppe such as: full face respirator, Blast hood, fall arrest devices, and

personnel rescue equipment.

Danos Applicator February 2012-August 2015

Provide quality workmanship in all blasting and painting functions Prepare paint and equipment for use Maintenance of tools and equipment Stop production if safety is compromised and discuss solutions Monitor equipment for defects or problems Proven track record of accurately completing research and training Assisting other departments when needed Highly focused in supporting deadline-driven operations Unload freight arriving at dock and other responsibilities as needed Experienced in oral communication

Honors and Activities: Worked with youth group, love soccer, and civic minded

References upon Request

Page 2: Pratt Resume 2016

Brandon Pratt4040 Rosemound Ave Waterford, MI, 48329Cell (248) 219-7666

[email protected] Education

NACE International-Level 1 CIP Certification 2015SCL Technical College- Dangers of Pressure 2013SCL Technical College- Core Compliance 2013Based on: Drug and Alcohol AwarenessDefensive DrivingElectrical Safety (non-qualified worker)Employees going offshore for the first time (T-1)ErgonomicsForklift TrucksGrounding Conductor/GFCI TrainingHand and Power Tool TrainingJSA/JTA TrainingManagement of Change (MOC)NORMPermit to WorkProcess Safety ManagementWelding Safety Awareness/Hot Work PermitCompleted SCL Technical College- Rigging-API-TPCP-0020 (2-6-13)Completed SCL Technical College- Core Compliance Annual Accident Prevention signs & TagsAsbestos Back SafetyBenzene Behavior Safety and InterventionBlood borne PathogensConfined Space EntryDrug and Alcohol Awareness

Emergency ResponseExcavationEvacuationFall ProtectionFire PreventionHand SafetyHazcom / HazwoperHazmat 126FHearing ConservationHydrogen Sulfide (H2S)Incident ReportingLadder SafetyLockout / Tagout / Electrical SafetyMarine Trash & DebrisPerson Protective Equipment (PPE)Prevention of Workplace ViolenceRespiratory EquipmentScaffolding TrainingSEMS Awareness Walking and Working SurfacesAerial Man Lift in accordance with 29 CFR 1910.67 &/or 29 CFR 1926.453Fork Lift Safety Training Nissan 110 ModelSit down counterbalanced rider (Class 5)Rough terrain counterbalanced rider (class 7)Offshore Water Survival HUET model 5Safe GulfTWIC cardFull User/ Rescue (8HR)

.

Page 3: Pratt Resume 2016

Brandon Pratt4040 Rosemound Ave Waterford, MI, 48329Cell (248) 219-7666

[email protected]

References:

Personal

Ms. Cathy Pratt

(248) 763-8769

Mr. Pierre Olivier

(985) 804-6966

Mr. Barry Moore

(985) 297-1207

Professional

Mr. Scott Nguyen

NACE CIP lvl 3

[email protected]

(504) 416-1954

Mr. Mitchell Wood

Relief Foreman

(785) 409-2040

Mr. Patryk Rak

NACE CIP lvl 2

(248) 515-9208