pq11605 go! sea life medley wall hanging pattern...cut 1 small circle for fish eye. red go! emojis...
TRANSCRIPT
Page 1 of 7 ©2019 AccuQuilt PQ11605
GO! Sea Life Medley Wall Hanging Finished Size: 18" x 53" Fabrics provided by Timeless Treasures.
Page 2 of 7 ©2019 AccuQuilt PQ11605
Dies Needed: GO! Sea Life Medley (55190) GO! Qube Mix & Match 10” Block (55797)
• GO! Square-5-1/2” (5” Finished) (Shape 1) • GO! Half Square Triangle-2-1/2” Finished Square (Shape 5)
Additional Dies Needed
• GO! Strip Cutter-3-1/2" (3” Finished) (55032) • GO! Strip Cutter-2-1/4" (1-3/4” Finished) (55053) • GO! Strip Cutter-2” (1-1/2" Finished) (55025) • GO! Strip Cutter-1-1/2" (1” Finished) (55024) • GO! Strip Cutter-1” (1/2” Finished) (55052)
Fabric Requirements:
Fabric Color Total Yardage
Cream 7/8 yard Blue 1-3/8 yards Seashell Print 1/2 yard Yellow 6” square or Fat Eighth Orange 6” square or Fat Eighth Dark Blue 6” square or Fat Eighth Red 6” square or Fat Eighth Batting 26" x 61" Backing 26" x 61" Fusible (18” wide) ½ yard
NOTE: Apply fusible to back of appliqué fabrics according to manufacturer’s instructions before cutting shapes.
Page 3 of 7 ©2019 AccuQuilt PQ11605
Cutting Directions:
Fabric Color Die Number of Shapes to Cut
Cream GO! Square-5-1/2” (5” Finished) (Shape 1)
Cut 1—6” x width of fabric (WOF) strip. Fanfold into 6" widths. Sub cut into 4—5" finished squares.
Cream
GO! Strip Cutter-2” (1-1/2" Finished) (55025)
Cut 1—2” x WOF strip. Sub cut into 3—2” x 10-1/2" sashing strips.
Cream
GO! Strip Cutter-1-1/2" (1” Finished) (55024)
Cut 3—1-1/2” x WOF strips. With diagonal seams, sew strips together into one long strip. Sub cut 2—1-1/2” x 12-1/2" and 2—1-1/2” x 45” inner border strips.
Cream GO! Strip Cutter-1” (1/2” Finished) (55052)
Cut 4—1” x WOF strips. With diagonal seams, sew strips together into one long strip. Sub cut into 2—1” x 18-1/2" and 2—1” x 53” flange strips.
Blue
GO! Strip Cutter-3-1/2” (3” Finished) (55032)
Cut 3—3-1/2” x LENGTH of fabric (LOF) strips. Sub cut into 2—3-1/2” x 47" and 2—3-1/2” x 18-1/2” outer border strips.
Blue
GO! Half Square Triangle-2-1/2” Finished Square (Shape 5)
Cut 4—4" x WOF strips. Fanfold into 4" widths. Sub cut into 48—2-1/2" finished half square triangles (HST).
Blue
GO! Strip Cutter-2-1/4" (1-3/4” Finished) (55053)
Cut about 5—2-1/4” x (approximately) 40” bias strips from the remaining yardage. Sew together into one long binding strip.
Seashell Print
GO! Half Square Triangle-2-1/2” Finished Square (Shape 5)
Cut 3—4" x WOF strips. Fanfold into 4" widths. Sub cut into 48—2-1/2" finished HSTs.
Yellow GO! Sea Life Medley (55190) Cut 1 Fish shape.
Orange GO! Sea Life Medley (55190) Cut 1 Sea Horse shape.
Page 4 of 7 ©2019 AccuQuilt PQ11605
Dark Blue GO! Sea Life Medley (55190) Cut 1 Crab shape.
Dark Blue GO! Sea Life Medley (55190) Cut 1 small circle for Fish eye.
Red GO! Emojis (55191) Cut 1 Starfish shape.
Page 5 of 7 ©2019 AccuQuilt PQ11605
Sewing Directions: Press all seams to one side and use ¼" seams. Refer to the quilt image for placement and stitching of applique blocks.
Sea Life Applique Blocks 1. Place the yellow Fish shape on top of a cream 5”
finished square.
2. Position the dark blue small circle for the eye on the Fish shape. Fuse and applique pieces in place.
3. Center and place the orange Sea Horse shape on top of a cream 5” finished square. Fuse and applique pieces in place.
4. Repeat Step 3 for the Crab shape and the Starfish shape.
Page 6 of 7 ©2019 AccuQuilt PQ11605
Sea Life Block 1. Sew one blue and one seashell print 2-1/2" finished half
square triangle (HST) (Shape 5) together as shown. Make 48 HST units.
2. Lay out 12 HST units placed around the Fish applique square, rotating HST units as necessary.
3. Sew the two HSTs from one side together and replace in the layout. Repeat for the two HSTs from the other side.
4. Sew the two HST units to both sides of the applique square.
5. Sew the four HSTs from the top together. Repeat for the remaining four HSTs from the bottom.
6. Sew all three rows together to complete a 10” finished block.
7. Repeat Steps 2-6 using the Sea Horse applique square, the Crab applique square and the Starfish applique square to make three more 10” finished blocks. Note that the HSTs are rotated differently with the Sea Horse and the Starfish blocks.
Page 7 of 7 ©2019 AccuQuilt PQ11605
Assemble the Quilt Top 1. Lay out blocks in one column with sashing as shown in
quilt diagram. Sew together. Press seams towards sashing strips.
2. Sew cream 1-1/2" x 45” inner border strips to the sides of the quilt. Press seams towards the inner border strips.
3. Sew cream 1-1/2" x 12-1/2" inner border strips to the top and bottom of the quilt. Press towards the inner border strips.
4. Sew blue 3-1/2" x 47” outer border strips to the sides of the quilt. Press seams towards the outer border strips.
5. Sew blue 3-1/2" x 18-1/2" outer border strips to the top and bottom of the quilt. Press towards the outer border strips.
Quilting and Finishing 1. Layer batting between quilt top and backing.
2. Pin or baste layers together.
3. Quilt as desired.
4. Trim excess batting and backing along the edges of the quilt.
5. With 1/8” seam allowance from the raw edges of the quilt, baste flange strips in place.
6. Add binding, mitering corners.