pp-rct piping systems - nupi americas

APPROVED F

OR POTA

BLE W

ATER

PP-RCTPiping Systems

NUPI AMERICAS, INC. was established in North America around twenty years ago in Houston, TX. It has since relocated its North American operations to the low country of South Carolina in a modern manufacturing, warehouse and headquarters site. From this coastal location, NUPI Americas provides sales and marketing activities for the Americas, as well as, pipe extrusion, fabrication and also manufactures pre-insulated piping system products.

NUPI AMERICAS, INC. combines high productivity and constant high quality standards while being fully conscious of the environment.

The synergy between research, production, quality control and post-

sales service allowed the company to obtain many international quality

certifications for his various product ranges. nupi’s market leadership has

established our role in extremely competitive and highly technological

fields such as the thermo-transformation of plastics and polymers.

This benchmark is well maintained thanks to high quality products and

constant attention to our customers’ needs and requirements, and by

means of an effective team of people in post-sales service, effective and

precise technical assistance and the training of installers.

Customers can rely on the best quality materials and precise manufacture,

obtained through completely automated production systems, and

continuous on time deliveries that perfectly integrate all business

functions in real time.

Facility in Early Branch, SC

Wharehouse in Early Branch, SC

THE

COM

PAN

Y

The NIRON brand consists of a Random Copolymer Polypropylene (PP-RCT) pipe and fitting system pro-duced by NUPI AMERICAS, manufactured to ASTM F2389 and CSA B137.11 Standards.

NIRON is a piping system used for all kinds of water applications including hot and cold potable water applications, hydronic heating applications, and both chilled water and cooling tower circulation pipes. The System can be used for large multi-family residential buildings, hotels, hospitals, malls, churches, schools, gymnasiums, cruise liners and merchant ships.

The NIRON System is also used in industrial installations for the conveyance of compressed air as well as a wide variety of chemical substances.

ADVANCED PP-RCT MATERIAL NIRON is manufactured from 100% Beta PP-RCT material, ahighly crystalline form of PPR which allows for up to twice the pressure rating at higher temperatures and superior chlorine resistance.

ABSOLUTE RELIABILITY Produced since 1982, the NIRON System has been sold in all 5 continents. Over 150,000 miles of pipes and fittings have been shipped with complete customer and installer satisfaction.

CERTIFIED QUALITY The NIRON System not only meets prestigious international quality standards, but also meets our own benchmarks. Quality to us quality stands for complete customer satisfaction. This is obtained exclu-sively through the supply of products having features that completely fulfil the application requirements and leave the customer with a desire to use the system again.

COMPLETE RANGEPipes and fittings - from ½” to 24” - are available in a wide range of fittings

and joining methods to solve any installation problem.

LOW THERMAL EXPANSION This is obtained thanks to the new composite MULTILAYER piping produced

with an innovative coextrusion technology. The middle layer is made of PP copolymer reinforced with fiberglass to reduce the linear thermal expansion up to 73%.

SPEED OF INSTALLATIONUnquestionably the biggest advantage of NIRON lies in the speed of installation.Due to easy joining methods, time of installation can be reduced by up to 30 to 50%.

THE PRODUCT

NO CORROSION OR SCALING Polypropylene is a poor conductor of electricity, so the NIRON System is cannot be affected by corrosion. Furthermore, thanks to its smooth inner surface, any type of lime incrustation is avoided.

ENERGY EFFICIENCY AND SAVINGS The low thermal conductivity and smooth wall of NIRON allows for considerable energy savings compared to metallic materials and saves on pumping costs.

LOW NOISE INSTALLATION The noise absorption properties and elasticity of this material soften noise and vibrations caused by the water flow and the water hammer effect.

RESISTANCE TO EXTREME TEMPERATURES AND THERMAL EXPANSION The NIRON System is tested to resist temperatures up to boiling water and freezing conditions. NIRON FG piping

allows thermal expansion to be reduced to levels similar to copper piping.

ABRASION RESISTANCE The high resistance of NIRON pipes eliminates erosion problems and allows high speed water flow.

NO TOXICITY The NIRON Systems is absolutely non-toxic, complies with many international health standards and is fully listed for

potable water by NSF.

30 YEAR WARRANTY The NIRON System is covered by third party liability insurance in accordance to EC Standards no. 85/374 and

to D.P.R no. 244 dated 24th May 1988 - Italian law.

THE PRODUCT

WIDE RANGE OF JOINING METHODSNIRON System offers the widest range of joining options of any PPR product line with five primary joining methods and a complete range of fitting sizes. It can be joined by butt fusion and electrofusion through 24”.

SOCKET FUSIONFor full pressure joining with a full range of fittings in ½” through 5” sizes. Joints can be made using hand held tools and in large sizes with bench-style tools for maximum effectiveness.

BUTT FUSIONButt fusion with long spigot fittings starting at 2” and through 24”. Butt fusion is often a more fabrication friendly technique compared to socket fusion in sizes of 2” through 5”, and customers can take advantage of this feature of the NIRON System.

ELECTROFUSION AND ELECTROLET™ WELDINGElectrofusion offers a superior and cost effective ability to solve difficult installation challenges. NIRON is the only PPR system available with a full fitting system allowing electrofusion in sizes of ½” through 8”. NIRON fittings are manufactured using single wire technology, which means welds are fused simultaneously for every elbow, tee and reducer for highly efficient labor rates. NIRON electrofusion may be performed from 10” through 24” using NIRON couplings.

COMPRESSION NIRON can be joined using a compression method, by the hand tightening of compression nuts of fittings and couplings. A full range of fittings are available in sizes of ½” through 4”. The system is rated to 150 PSI at ambient temperatures, and is rated to 90 psi for temperatures of up to 160oF in sizes through 2 inch and to 90 PSI for temperature of up to 140oF in sizes of 2½” through 4 inch. NIRON compression fittings and couplings may be disassembled and re-used, which adds versatility. Transition couplings are also available for connection to copper and copper-tube size systems.

INSTABRANCHTM AND INSTAHEADERTM WELDINGNIRON offers a full variety of fittings that allow small diameter branches to be readily fused into larger pipes without the expense of adding reducing tees. NIRON has saddles available which allow both socket fusion outlets, as well as long spigot outlets (in select sizes). In addition, saddle parts are available with female threaded adapters, as well as male transition parts to allow for a variety of PEX transitions. Custom headers can be created on site, or in the fabrication shop to prefabricate any kind of header combination that is required. Instabranch welding offers substantial labor savings in comparison to branch installations involving copper or steel piping.

NIRON PIPING SYSTEM

NIRON CLIMA PIPE

MULTILAYER PP-RCT PIPE GREYSDR 7.3 from ½” to 10” SDR 9 from 1” to 12”SDR 11 from 1¼” to 20”SDR 17 from 2” to 24”

PIPE LENGTH 20/40 FT

FITTINGS

LONG RADIUS 90° ELBOWCODE inchesNCLR ½” - ¾”

CROSSOVER PIPECODE inchesNSOR ½” - ¾” - 1”NSOFF ½” - ¾”NSOFM ½” - ¾”

90° ELBOWCODE inchesNG (SOCKET FUSION) from ½” to 5”NG_MM (LONG SPIGOT)SDR 7.3 from 2” to 10”SDR 11 from 2” to 20”SDR 17 from 2” to 24”

FEMALE THREADED 90° ELBOWCODE inchesNGF from ½” x ½” NPT to 2” x 2” NPT

MALE THREADED 90° ELBOWCODE inchesNGM from ½” x ½” NPT

to 1” x 1” NPT

FEMALE THREADED BACK PLATE 90° CODE inchesNTER ½” x ½” NPT

FEMALE THREADED WINGED 90° ELBOWCODE inches NGTF ½” x ½” NPT

MALE THREADED WINGED 90° ELBOWCODE inches NGTM ½” x ½” NPT

TEMPLATE FOR EXTERNAL BATH TAPSCODE inches NGVF ½” x ½” NPT

¾” x ½” NPT

FEMALE THREADED 90° ELBOW FOR TEMPLATECODE inches NGOF ½” x ½” NPT

¾” x ½” NPT

MALE THREADED 90° ELBOW FOR TEMPLATECODE inchesNGOM ½” x ½” NPT

STREET 90° ELBOWCODE inchesNGMF from ½” to 1¼”

FEMALE THREADED STREET 90° ELBOWCODE inchesNGMFF ½” x ½” NPT

45° ELBOWCODE inchesNC45 (SOCKET FUSION)

from ½” to 5”NC45_MM (LONG SPIGOT)SDR 7.3 from 2” to 10”SDR 11 from 2” to 20”SDR 17 from 2” to 24”

22.5° ELBOWCODE inchesNC22 SDR 7.3 from 3” to 10”SDR 11 from 3” to 20”SDR 17 from 3” to 24”

STREET 45° ELBOWCODE inchesNC45MF from ½” to 1”

90° TEECODE inchesNT (SOCKET FUSION) from ½” to 5”NT_MM (LONG SPIGOT)SDR 7.3 from 2” to 10”SDR 11 from 2” to 20”SDR 17 from 2” to 24”

FEMALE THREADED TEE W/NPT LEAD FREE BRASSCODE inchesNTF from ½” x ½” NPT

to 1”x1” NPT

FEMALE THREADED TEE W/NPT STAINLESS STEELCODE inchesNTF_SS from ½” x ½” NPT

to 1” x 1” NPT

MALE THREADED TEE W/NPT LEAD FREE BRASSCODE inchesNTM from ½” x ½” NPT

to 1” x 1” NPT

MALE THREADED TEE W/NPT STAINLESS STEELCODE inchesNTM_SS from ½” x ½” NPT

to 1” x 1” NPT

REDUCING TEECODE inchesNTR (SOCKET FUSION)

from ¾”x ½” to 5”x4”

NTR_MM (LONG SPIGOT)SDR 11 from 3”x1¼” to 10”x8”SDR 17 from 3”x1¼” to 10”x8”

MALE BRANCH REDUCING TEE - LONG SPIGOTCODE inchesNTR_M SDR 11 from 6”x 2” to 20”x18”SDR 17 from 6”x 2” to 24”x22”

SOCKET BRANCH FUSION REDUCING TEECODE inchesNTRF SDR 11 from 3”x1¼” to 14”x3”

45° LATERAL WYE - LONG SPIGOTCODE inchesNWYESDR 7.3 from 3” to 6”SDR 9 from 3” to 12”SDR 11 from 3” to 16”SDR 17 from 3” to 20”

REDUCED CROSS - SOCKET FUSIONCODE inchesNCR from 1¼” x ½” x ½” x 1¼” to 1¼” x ¾” x ¾” x 1¼”

REDUCERCODE inchesNR (SOCKET FUSION) from ¾” x ½” to 5”x 4” NR_MM (LONG SPIGOT)SDR 7.3 from 2”x1¼” to 12”x10”SDR 11 from 2½”x1¼” to 20”x18”SDR 17 from 2½”x1¼” to 24”x22”NRCC (SHORT SPIGOT)SDR 7.3 from 6”x3” to 10”x8”SDR 11 from 10”x6” to 20”x18”SDR 17 from 10”x6” to 24”x22”

COUPLINGCODE inchesNMAN from ½” to 5”

FEMALE THREADED ADAPTER - SOCKET FUSIONCODE inchesNRFF (W/LEAD FREE BRASS)NRFF_L (STANDARD BRASS)NRFF_SS (W/NPT STAINLESS STEEL) from ½”x½” NPT to 5”x4” NPT

MALE THREADED ADAPTERCODE inches

NRFM (W/LEAD FREE BRASS)NRFM_L (STANDARD BRASS)NRFM_SS (W/NPT STAINLESS STEEL) from ½” x ½” to 5” x 4” NPT

FEMALE THREADED ADAPTER - LONG SPIGOTCODE inchesNRFF (W/LEAD FREE BRASS) from ½”x1½” to 5”x4”NPT

MALE THREADED ADAPTER - LONG SPIGOTCODE inchesNRFM (W/LEAD FREE BRASS) from ½”x1½” to 5”x4”NPT

PEX ADAPTER (COLD EXPANSION)CODE inchesNPR (SOCKET FUSION)COLD EXPANSION ASTM1960 from ½”x½” to 1½”x2” CRIMP RING ASTM1807 from ½”x½” to 1½”x1”NPR_11 (LONG SPIGOT)SDR11 from ½”x½” to 1½”x2”

COPPER ADAPTER WITH SOCKET ENDCODE inchesNCUA_L from ½”x½” to 1¼”x 1¼”CTS

www.nupiamericas.com - [email protected]

ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nclr pollici\NI10121.dwg

All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned

DESC:

All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice

DRAWING No:

SHEET OF REV.NCLR LONG RADIUS 90° ELBOW - SOCKET

FUSION NI10121

1 1 0

ND D

L1

L

H

CODE ND D L1 L H27NCLR20 1/2 => 20 mm 1.10 0.63 2.17 2.1727NCLR25 3/4 => 25 mm 1.34 0.63 2.56 2.56


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ng pollici\NI10125.dwg


DESC:


DRAWING No:

SHEET OF REV.NG 90° ELBOW - SOCKET FUSION

NI10125

1 1 0

ND

D1D

H1

H

L1

L2L

CODE ND D1 D L1 L2 L H1 H27NG20 1/2 => 20 mm 0.65 1.14 0.63 1.06 1.64 1.06 1.6327NG25 3/4 => 25 mm 0.93 1.40 0.63 1.22 1.93 1.22 1.9327NG32 1 => 32 mm 1.18 1.81 0.79 1.46 2.36 1.46 2.3627NG40 1 1/4 => 40 mm 1.42 2.21 0.87 1.69 2.80 1.69 2.7927NG50 1 1/2 => 50 mm 1.81 2.76 0.98 2.01 3.39 2.01 3.3927NG63 2 => 63 mm 2.32 3.47 1.14 2.44 4.17 2.44 4.1727NG75 2 1/2 => 75 mm 2.76 3.98 1.30 2.87 4.86 2.87 4.8627NG90 3 => 90 mm 3.37 4.45 1.46 3.25 5.47 3.25 5.4727NG110 3 1/2 => 110 mm 3.94 5.75 1.69 3.94 6.81 3.94 6.8127NG125 4 => 125 mm 4.45 6.50 1.87 4.92 8.17 4.92 8.17


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngf_NPT pollici\NI10057.dwg


DESC:


DRAWING No:

SHEET OF REV.NGF_NPT FEMALE THREADED 90° ELBOWS -

NPT - LEAD FREE BRASS NI10057

1 1 -1

H1 H

L1

L2

L

D

LTh. min

Thre

ad

HH

1

LTh. min

L2L

Thre

ad

L1

D

HH

1

D

Thre

adC

H

LTh. min

L2

LCH

L1

ND ND ND

L

D1 D

1

D1

CODE ND D1 D Thread L Thread min L1 L2 L H1 H CH LCH27NGF2012NPT (B) 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.54 2.11 1.08 1.81 - -27NGF2512NPT (A) 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.67 1.54 2.22 1.20 1.93 - -27NGF2534NPT (A) 3/4 => 25 mm 0.73 1.65 3/4" NPT 0.55 0.67 1.54 2.22 1.20 2.03 - -27NGF3212NPT (B) 1 => 32 mm 0.55 1.65 1/2" NPT 0.53 0.71 1.81 2.64 1.42 2.24 - -27NGF3234NPT (B) 1 => 32 mm 0.73 1.65 3/4" NPT 0.55 0.71 1.81 2.64 1.42 2.24 - -27NGF321NPT (B) 1 => 32 mm 0.95 2.13 1" NPT 0.66 0.79 1.81 2.64 1.85 2.91 - -27NGF401NPT (B) 1 1/4 => 40 mm 0.95 2.24 1" NPT 0.66 0.79 2.05 3.11 1.69 2.84 - -27NGF50114NPT (C) 1 1/2 => 50 mm 1.30 2.76 1"1/4 NPT 0.68 0.98 2.60 3.98 2.01 3.39 1.81 0.5927NGF50112NPT (C) 1 1/2 => 50 mm 1.56 2.76 1"1/2 NPT 0.68 0.98 2.60 3.98 2.01 3.39 2.17 0.5927NGF63112NPT (C) 2 => 63 mm 1.56 3.47 1"1/2 NPT 0.68 1.14 3.03 4.76 2.44 4.17 2.17 0.5927NGF632NPT (C) 2 => 63 mm 1.97 3.47 2" NPT 0.70 1.14 3.23 4.96 2.44 4.17 2.55 0.79


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngm_NPT pollici\NI10058.dwg


DESC:


DRAWING No:

SHEET OF REV.NGM _NPT

MALE THREADED 90° ELBOWS - NPT - LEAD FREE BRASS NI10058

1 1 -1

LTh. minL2

L

ND

L1H

1H

DTh

read

D1

CODE Dn D1 D Thread L Thread min L1 L2 L H1 H27NGM2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 2.13 2.70 1.08 1.8127NGM2512NPT 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.67 2.13 2.82 1.20 1.9327NGM2534NPT 3/4 => 25 mm 0.73 1.65 3/4" NPT 0.55 0.67 2.13 2.89 1.20 2.0327NGM3212NPT 1 => 32 mm 0.55 1.65 1/2" NPT 0.53 0.71 2.40 3.23 1.42 2.2427NGM3234NPT 1 => 32 mm 0.73 1.65 3/4" NPT 0.55 0.71 2.40 3.31 1.42 2.2427NGM321NPT 1 => 32 mm 0.95 2.13 1" NPT 0.68 0.79 2.56 3.41 1.85 2.91


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngtm_NPT pollici\NI10128.dwg


DESC:


DRAWING No:

SHEET OF REV.NGTM_NPT

MALE THREADED WINGED 90° - NPT - LEAD FREE BRASS NI10128

1 1 0

D1

Thre

adD

LTh. minL2

ND

L1

L3L4

H1

H

L

D2

CODE ND D1 D2 D Thread LThread min L1 L2 L3 L4 L H1 H27NGTM2038NPT 1/2 => 20 mm 0.43 0.12 1.46 3/8" NPT 0.41 0.63 1.97 2.60 2.95 2.54 1.08 1.8127NGTM2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 2.13 2.60 2.95 2.70 1.08 1.81


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngvf_NPT pollici\NI10130.dwg


DESC:


DRAWING No:

SHEET OF REV.NGVF_NPT

TEMPLATE FOR EXTERNAL BATH TAPS1/2" x 1/2" NPT3/4" x 1/2" NPT

NI10130

1 1 0

A

B

C A

B

CAA

L2L1

D1

L

H1

H

CODE L1 L2 L H1 H D1 A-A B-A B-B C-C27NGVF2012NPT 1.97 0.59 13.94 1.99 2.19 0.16 5.91 6.30 6.69 7.0927NGVF2512NPT 1.97 0.59 13.94 2.21 2.19 0.16 5.91 6.30 6.69 7.09


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngof_NPTpollici\NI10131.dwg


DESC:


DRAWING No:

SHEET OF REV.NGOF_NPT

FEMALE THREADED 90° ELBOW FOR TEMPLATE - NPT - LEAD FREE BRASS NI10131

1 1 0

D1

Thre

adD

L1

NDLTh. minL2

L

H1

H

CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGOF2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.18 2.15 1.12 1.9127NGOF2512NPT 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.18 2.15 1.34 2.13


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nter_NPT pollici\NI10126.dwg


DESC:


DRAWING No:

SHEET OF REV.NTER_NPT

FEMALE THREADED BACK PLATE 90° ELBOW - NPT - LEAD FREE BRASS NI10126

1 1 0

D

LTh. minL2

ND

L

L1

H1

H

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H2 H27NTER2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 1.54 2.11 1.08 2.24 2.50

Thre

adD

1

D2

H2


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngom_NPT pollici\NI10132.dwg


DESC:


DRAWING No:

SHEET OF REV.NGOM_NPT

MALE THREADED 90° ELBOW FOR TEMPLATE - NPT - LEAD FREE BRASS NI10132

1 1 0

D1

Thre

adD

LTh. min NDL2

L

L1H

1H

CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGOM2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.77 2.74 1.12 1.91


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngmff_NPT pollici\NI10135.dwg


DESC:


DRAWING No:

SHEET OF REV.NGMFF_NPT

FEMALE THREADED STREET 90° ELBOW - NPT - LEAD FREE BRASS NI10135

1 1 0

NDL2

L

Thre

ad

LTh. min

H1

H

L1

D

D1

CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGMFF2012NPT 1/2 => 20 mm 0.52 1.14 1/2" NPT 0.53 0.63 1.22 1.77 1.46 2.17


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nc45 pollici\NI10136.dwg


DESC:


DRAWING No:

SHEET OF REV.NC45 45° ELBOW - SOCKET FUSION

NI10136

1 1 0ND

D1D

L1

H

L

CODE ND D1 D L1 L H1 H27NC4520 1/2 => 20 mm 0.65 1.14 0.63 1.30 0.85 1.8127NC4525 3/4 => 25 mm 0.93 1.34 0.63 1.81 0.97 2.1127NC4532 1 => 32 mm 1.18 1.65 0.79 2.21 1.14 2.5227NC4540 1 1/4 => 40 mm 1.42 2.09 0.87 2.64 1.26 2.8527NC4550 1 1/2 => 50 mm 1.87 2.60 0.98 3.29 1.56 3.5427NC4563 2 => 63 mm 2.36 3.27 1.14 4.02 1.77 4.1327NC4575 2 1/2 => 75 mm 2.76 3.90 1.30 5.10 2.56 5.7127NC4590 3 => 90 mm 3.39 4.86 1.46 5.71 2.24 5.5127NC45110 3 1/2 => 110 mm 3.94 5.75 1.69 6.79 2.76 6.6727NC45125 4 => 125 mm 4.45 6.50 1.87 7.64 3.07 7.46

H1

www.nupiindustrieitaliane.com - [email protected]

ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nc45mf\NB10075.dwg

All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14

DESC:


DRAWING No:

SHEET OF REV.NC45MF CURVA 45° MASCHIO/FEMMINA

STREET 45° ELBOW - SOCKET FUSION NB10075

1 1 0

L2

L1 H1

Dn2

Dn1

D

D1

CODE Dn1 Dn2 D1 D L1 L2 H127NC45MF20 20 20 13 30,5 14,5 15 19,527NC45MF25 25 25 16,5 34,5 16 16 2227NC45MF32 32 32 21 43 20 17 26


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nt pollici\NI10138.dwg


DESC:


DRAWING No:

SHEET OF REV.NT TEE - SOCKET FUSION

NI10138

1 1 0

HH

1

LL2

L1

D1NDD

CODE ND D1 D L1 L2 L H1 H27NT20 1/2 => 20 mm 0.71 1.30 0.63 1.06 2.13 1.06 1.7127NT25 3/4 => 25 mm 0.83 1.38 0.67 1.24 2.48 1.24 1.9327NT32 1 => 32 mm 1.18 1.81 0.79 1.46 2.91 1.46 2.3627NT40 1 1/4 => 40 mm 1.42 2.21 0.87 1.69 3.39 1.69 2.8027NT50 1 1/2 => 50 mm 1.81 2.76 0.98 2.01 4.02 2.01 3.3927NT63 2 => 63 mm 2.32 3.47 1.14 2.44 4.88 2.44 4.1727NT75 2 1/2 => 75 mm 2.76 3.98 1.30 2.87 5.75 2.87 4.8627NT90 3 => 90 mm 3.47 4.45 1.46 3.31 6.61 3.31 5.5327NT110 3 1/2 => 110 mm 3.94 5.75 1.69 3.94 7.87 3.94 6.8127NT125 4 => 125 mm 4.45 6.50 1.87 4.92 9.84 4.92 8.17


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntm_NPT pollici\NI10059.dwg


DESC:


DRAWING No:

SHEET OF REV.NTM_NPT

MALE THREADED TEE - NPT - LEAD FREE BRASS NI10059

1 1 -1

L1

NDD

H1 H

D1Thread

D2

LL2

LTh.

min

L1

HH

1

NDD

D1Thread

D2L2

L

TYPE A TYPE B

LTh.

min

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTM2012NPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 2.13 2.7027NTM2512NPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 2.13 2.8227NTM2534NPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 2.21 2.8927NTM3212NPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 2.21 3.0327NTM3234NPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 2.28 3.1027NTM321NPT (B) 1 => 32 mm 0.95 2.13 1.65 1" NPT 0.68 0.79 1.87 3.74 2.50 3.35


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntm_ss NPT pollici\NI10193.dwg


DESC:


DRAWING No:

SHEET OF REV.NTM_SSNPT

MALE THREADED TEE - STAINLESS STEEL - NPT NI10193

1 1 0

L1

NDD

H1 H

D1Thread

D2

LL2

LTh.

min

L1

HH

1

NDD

D1Thread

D2L2

L

TYPE A TYPE B

LTh.

min

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTM2012SSNPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 2.13 2.7027NTM2512SSNPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 2.13 2.8227NTM2534SSNPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 2.21 2.8927NTM3212SSNPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 2.21 3.0327NTM3234SSNPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 2.28 3.1027NTM321SSNPT (B) 1 => 32 mm 0.95 2.13 1.65 1" NPT 0.68 0.79 1.87 3.74 2.50 3.35


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntr pollici\NI10139.dwg


DESC:


DRAWING No:

SHEET OF REV.NTR REDUCED TEE SOCKET FUSION

NI10139

1 5 0

CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H27NTR252025 3/4=> 25 mm 1/2=> 20 mm 3/4=> 25 mm 0.83 0.65 0.83 1.14 1.38 0.67 0.63 0.67 2.44 1.18 1.8727NTR253225 3/4=> 25 mm 1=> 32 mm 3/4=> 25 mm 0.83 0.83 0.83 1.81 1.81 0.67 0.79 0.67 2.91 1.49 2.4027NTR322032 1=> 32 mm 1/2=> 20 mm 1=> 32 mm 1.18 0.65 1.18 1.14 1.81 0.79 0.63 0.79 2.95 1.38 2.2827NTR322532 1=> 32 mm 3/4=> 25 mm 1=> 32 mm 1.18 0.83 1.18 1.38 1.81 0.79 0.67 0.79 2.95 1.38 2.2827NTR402040 1 1/4=>40 mm 1/2=> 20 mm 1 1/4=>40 mm 1.42 0.65 1.42 1.30 2.09 0.95 0.63 0.95 2.91 1.54 2.6027NTR402540 1 1/4=>40 mm 3/4=> 25 mm 1 1/4=>40 mm 1.42 0.83 1.42 1.30 2.09 0.95 0.79 0.95 2.91 1.54 2.6027NTR403240 1 1/4=>40 mm 1=> 32 mm 1 1/4=>40 mm 1.38 1.18 1.38 2.13 2.13 0.87 0.79 0.87 3.43 1.69 2.7627NTR502050 1 1/2=>50 mm 1/2=> 20 mm 1 1/2=>50 mm 1.85 0.65 1.85 1.69 2.60 1.02 0.63 1.02 3.43 1.85 3.1527NTR502550 1 1/2=>50 mm 3/4=> 25 mm 1 1/2=>50 mm 1.85 0.83 1.85 1.69 2.60 1.02 0.79 1.02 3.43 1.85 3.1527NTR503250 1 1/2=>50 mm 1=> 32 mm 1 1/2=>50 mm 1.85 1.18 1.85 1.69 2.60 1.02 0.79 1.02 3.43 1.85 3.1527NTR504050 1 1/2=>50 mm 1 1/4=>40 mm 1 1/2=>50 mm 1.69 1.42 1.69 2.60 2.60 0.91 0.87 0.91 4.02 1.97 3.2727NTR632563 2 => 63 mm 3/4=> 25 mm 2 => 63 mm 2.36 0.83 2.36 2.09 3.27 1.18 0.83 1.18 4.02 2.13 3.7827NTR633263 2 => 63 mm 1=> 32 mm 2 => 63 mm 2.36 1.18 2.36 2.09 3.27 1.18 0.83 1.18 4.02 2.13 3.7827NTR634063 2 => 63 mm 1 1/4=>40 mm 2 => 63 mm 2.36 1.42 2.36 2.09 3.27 1.18 0.91 1.18 4.02 2.13 3.7827NTR635063 2 => 63 mm 1 1/2=>50 mm 2 => 63 mm 1.97 1.81 1.97 3.15 3.15 0.98 1.02 0.98 4.80 2.52 4.09

H

D4L

L1 L3

ND

1

L2

H1N

D3D

ND2D2

D1

D3


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncr pollici\NI10140.dwg


DESC:


DRAWING No:

SHEET OF REV.NCR REDUCED CROSS

NI10140

1 1 0

ND

2D

3

ND1D

D2

L2

L3L

L1H

1H

D1

CODE ND1 ND2 D1 D2 D3 D L1 L2 L3 L H1 H27NCR402020 1 1/4 => 40 mm 1/2 => 20 mm 1.42 0.65 1.30 2.09 0.87 0.63 1.46 2.91 1.58 3.1527NCR402525 1 1/4 => 40 mm 3/4 => 25 mm 1.42 0.93 1.30 2.09 0.87 0.63 1.49 2.91 1.58 3.15


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nr pollici\NI10142.dwg


DESC:


DRAWING No:

SHEET OF REV.NR REDUCING SOCKET FUSION

BUSHINGS NI10142

1 3 0

L

D

S1

L2L1

ND

2

ND

1

CODE ND1 S1 ND2 D1 D L1 L2 L27NR2520 3/4 => 25 mm 0.17 1/2 => 20 mm - 1.14 0.75 0.63 1.6127NR3225 1 => 32 mm 0.21 3/4 => 25 mm - 1.38 0.87 0.67 1.7327NR4032 1 1/4 => 40 mm 0.26 1 => 32 mm - 1.81 0.98 0.79 1.9727NR5040 1 1/2 => 50 mm 0.33 1 1/4 => 40 mm - 2.21 1.10 0.87 2.1727NR6350 2 => 63 mm 0.41 1 1/2 => 50 mm - 2.76 1.26 0.98 2.1327NR7563 2 1/2 => 75 mm 0.49 2 => 63 mm - 3.27 1.42 1.14 2.9127NR9075 3 => 90 mm 0.59 2 1/2 => 75 mm - 3.78 1.46 1.34 3.1527NR11090 3 1/2 => 110 mm 0.72 3 => 90 mm - 4.51 1.46 1.46 3.0327NR125110 4 => 125 mm 0.82 3 1/2 => 110 mm - 5.97 1.81 1.58 3.62


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nr_11MM pollici - SDR 11\NI10143.dwg


DESC:


DRAWING No:

SHEET OF REV.NR_11MM

LONG SPIGOT MALE CONCENTRIC REDUCERSSDR11

NI10143

1 1 -1

L1 L2

L

ND

1

ND

2

S1 S2

CODE ND1 S1 ND2 S2 L1 L2 L27NR754011MM 2 1/2 => 75 mm 0.27 1 1/4 => 40 mm 0.15 2.56 1.89 5.6327NR755011MM 2 1/2 => 75 mm 0.27 1 1/2 => 50 mm 0.18 2.56 1.89 5.5527NR756311MM 2 1/2 => 75 mm 0.27 2 => 63 mm 0.23 2.80 2.52 5.9027NR905011MM 3 => 90 mm 0.32 1 1/2 => 50 mm 0.18 2.87 2.24 5.9827NR906311MM 3 => 90 mm 0.32 2 => 63 mm 0.23 2.80 2.24 5.9027NR907511MM 3 => 90 mm 0.32 2 1/2 => 75 mm 0.27 3.19 2.84 6.8927NR1106311MM 3 1/2 => 110 mm 0.39 2 => 63 mm 0.23 3.35 2.76 6.8927NR1107511MM 3 1/2 => 110 mm 0.39 2 1/2 => 75 mm 0.27 3.47 2.28 7.2827NR1109011MM 3 1/2 => 110 mm 0.39 3 => 90 mm 0.32 3.07 2.76 6.8927NR1257511MM 4 => 125 mm 0.45 2 1/2 => 75 mm 0.27 3.62 2.36 7.8427NR1259011MM 4 => 125 mm 0.45 3 => 90 mm 0.32 3.39 2.76 7.3227NR12511011MM 4 => 125 mm 0.45 3 1/2 => 110 mm 0.39 3.50 3.03 7.3627NR16011011MM 6 => 160 mm 0.57 3 1/2 => 110 mm 0.39 4.06 3.46 8.4627NR16012511MM 6 => 160 mm 0.57 4 => 125 mm 0.45 4.02 3.58 8.4327NR20016011MM 8 => 200 mm 0.72 6 => 160 mm 0.58 4.65 3.98 9.45


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nman pollici\NI10144.dwg


DESC:


DRAWING No:

SHEET OF REV.NMAN COUPLINGS - SOCKET FUSION

NI10144

1 1 0

ND

D1 D

L1L

CODE ND D1 D L1 L27NMAN20 1/2 => 20 mm 0.71 1.14 0.67 1.3827NMAN25 3/4 => 25 mm 0.79 1.38 0.71 1.5427NMAN32 1 => 32 mm 1.18 1.81 0.79 1.6927NMAN40 1 1/4 => 40 mm 1.46 2.21 0.87 1.8927NMAN50 1 1/2 => 50 mm 1.85 2.76 0.98 2.1327NMAN63 2 => 63 mm 2.36 3.47 1.14 2.4427NMAN75 2 1/2 => 75 mm 2.76 3.98 1.30 2.8027NMAN90 3 => 90 mm 3.45 4.51 1.46 3.0327NMAN110 3 1/2 => 110 mm 4.17 5.95 1.69 3.6227NMAN125 4 => 125 mm 4.61 6.30 1.87 4.02

PP-RCT


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ng9073_MM SDR7.4\NB10005.dwg


DESC:


DRAWING No:

SHEET OF REV.NG9073_MM90° ELBOW - LONG SPIGOT SDR 7.4PP-RCT

NB10005

1 2 -1

CODE Dn S min L1 L2 H27NG907363MM 63 8,6 70 120 15427NG907375MM 75 10,3 75 130 17127NG907390MM 90 12,3 90 148,5 19727NG9073110MM 110 15,1 87 160 22127NG9073125MM 125 17,1 95 184 25027NG9073160MM 160 21,9 110 217 303

L1L2

H

S m

inDn


ITEM:

C:\Vault_Temp\Disegni\Schede Tecniche\Niron Beta\Butt fusion fittings\NB10014.dwg


DESC:


DRAWING No:

SHEET OF REV.NC4573_MM45° ELBOW - LONG SPIGOTSDR 7.4 PP-RCT

NB10014

1 2 -1

S min

L1

H

CODE Dn S min L1 H27NC457363MM 63 8,6 70 17527NC457375MM 75 10,3 75 20527NC457390MM 90 12,3 90 23527NC4573110MM 110 15,1 87 24227NC4573125MM 125 17,1 95 26527NC4573160MM 160 21,9 103 311

Dn


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nt73_MM SDR7.4\NB10018.dwg

All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874

DESC:


DRAWING No:

SHEET OF REV.NT73_MMTEE - LONG SPIGOT SDR 7.4 PP-RCT

NB10018

1 2 -1

S m

in

L1L2

CODE Dn S min L1 L227NT7363MM 63 8,6 70 12027NT7375MM 75 10,3 75 13027NT7390MM 90 12,3 90 148,527NT73110MM 110 15,1 87 16027NT73125MM 125 17,1 95 18527NT73160MM 160 21,9 110 217

Dn


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ntr11_M SDR11\NB10022.dwg


DESC:


DRAWING No:

SHEET OF REV.NTR11_M MALE SIDE FUSION REDUCED TEE - LONG

SPIGOTSDR 11 PP-RCT

NB10022

1 3 0

CODE Dn1 Dn2 S1 min S2 min27NTR1116063M160 160 63 14,6 5,827NTR1116075M160 160 75 14,6 6,827NTR1116090M160 160 90 14,6 8,227NTR11160110M160 160 110 14,6 10,027NTR11160125M160 160 125 14,6 11,427NTR11200M63200 200 63 18,2 5,827NTR1120075M200 200 75 18,2 6,827NTR1120090M200 200 90 18,2 8,227NTR11200110M200 200 110 18,2 10,027NTR11200125M200 200 125 18,2 11,427NTR11200160M200 200 160 18,2 14,627NTR1125063M250 250 63 22,7 5,827NTR1125075M250 250 75 22,7 6,827NTR1125090M250 250 90 22,7 8,227NTR11250110M250 250 110 22,7 10,027NTR11250125M250 250 125 22,7 11,427NTR11250160M250 250 160 22,7 14,627NTR11250200M250 250 200 22,7 18,227NTR1131563M315 315 63 28,6 5,827NTR1131575M315 315 75 28,6 6,827NTR1131590M315 315 90 28,6 8,227NTR11315110M315 315 110 28,6 10,027NTR11315125M315 315 125 28,6 11,427NTR11315160M315 315 160 28,6 14,627NTR11315200M315 315 200 28,6 18,227NTR11315250M315 315 250 28,6 22,7

S1 m

in

Dn1

S2 min

Dn2


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nwye11 SDR11\NB10086.dwg


DESC:


DRAWING No:

SHEET OF REV.NWYE11 TEE A 45° - CODOLO LUNGO

WYE LATERAL 45° - LONG SPIGOTSDR 11

NB10086

1 1 0

L

45°L1

S m

inDn

CODE Dn S min L1 L27NWYE1190 90 8,2 200 55627NWYE11110 110 10,0 200 55627NWYE11125 125 11,4 200 57727NWYE11160 160 14,6 200 62627NWYE11200 200 18,2 200 74027NWYE11250 250 22,7 250 96027NWYE11315 315 28,6 250 115027NWYE11355 355 32,2 250 129027NWYE11400 400 36,3 250 1405


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngmf pollici\NI10134.dwg


DESC:


DRAWING No:

SHEET OF REV.NGMF STREET 90° ELBOW -SOCKET FUSION

NI10134

1 1 0

D1

H1

H

L1

L

ND

2

L2ND1

D

CODE ND1 ND2 D1 D L1 L2 L H1 H27NGMF20 1/2 => 20 mm 1/2 => 20 mm 0.52 1.18 0.63 1.14 1.54 1.12 1.7127NGMF25 3/4 => 25 mm 3/4 => 25 mm 0.65 1.38 0.63 1.30 1.79 1.38 2.0727NGMF32 1 => 32 mm 1 => 32 mm 0.95 1.69 0.79 1.34 1.97 1.87 2.7027NGMF40 1 1/4 => 40 mm 1 1/4 => 40 mm 0.95 1.69 0.49 1.34 1.97 1.87 2.70


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntf_NPT pollici\NI10060.dwg


DESC:


DRAWING No:

SHEET OF REV.NTF_NPT FEMALE THREADED TEE - NPT - LEAD

FREE BRASS NI10060

1 1 -1

H

H1

NDD

L1

L2L

LTh.

min

Thread

H1

H

LL2

L1

Thread

NDD

LTh.

min

TYPE A TYPE B

D2

D1 D1

D2

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTF2012NPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 1.54 2.1127NTF2512NPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 1.54 2.2227NTF2534NPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 1.54 2.2227NTF3212NPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 1.61 2.4427NTF3234NPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 1.61 2.4427NTF321NPT (B) 1 => 32 mm 0.95 2.13 2.13 1" NPT 0.66 0.79 1.85 3.74 1.54 2.60


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nc2273_MM\NI10331.dwg

All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389

DESC:


DRAWING No:

SHEET OF REV.NC2273_MMB22° ELBOW - LONG SPIGOTSDR 7.3 NI10331

1 1 0

R

L

L

22°

Z

Z

ND

S

CODE ND S L Z R27NC227390MMB 3" => 90 mm 0.48 5.91 7.64 6.5027NC2273110MMB 4" => 110 mm 0.59 5.91 7.64 6.5027NC2273125MMB 5" => 125 mm 0.67 5.91 7.87 7.4027NC2273160MMB 6" => 160 mm 0.86 5.91 8.43 9.4527NC2273200MMB 8" => 200 mm 1.08 5.91 9.06 11.8127NC2273250MMB 10" => 250 mm 1.35 9.84 13.78 14.7627NC2273315MMB 12" => 315 mm 1.70 11.81 16.85 18.6227NC2273355MMB 14" => 355 mm 1.91 11.81 17.44 20.98


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntf_ss NPT pollici\NI10192.dwg


DESC:


DRAWING No:

SHEET OF REV.NTF_SSNPT

FEMALE THREADED TEE - STAINLESS STEEL - NPT NI10192

1 1 0

H

H1

NDD

L1

L2L

LTh.

min

Thread

H1

H

LL2

L1

Thread

NDD

LTh.

min

TYPE A TYPE B

D2

D1 D1

D2

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTF2012SSNPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 1.54 2.1127NTF2512SSNPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 1.54 2.2227NTF2534SSNPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 1.54 2.2227NTF3212SSNPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 1.61 2.4427NTF3234SSNPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 1.61 2.4427NTF321SSNPT (B) 1 => 32 mm 0.95 2.13 2.13 1" NPT 0.66 0.79 1.85 3.74 1.54 2.60


ITEM:

C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Butt Fusion Fittings\NI10238.dwg


DESC:


DRAWING No:

SHEET OF REV.NTRS11_MM90° REDUCING TEE - LONG SPIGOTSDR 11 NI10238

1 1 -2

CODE ND1 S1 L1 ND2 S2 L2 L27NTRS119040MM 3" => 90 mm 0.32 3.31 1" 1/4 => 40 mm 0.15 1.89 5.0027NTRS119050MM 3" => 90 mm 0.32 3.31 1" 1/2 = 50 mm 0.18 2.36 5.0027NTRS119063MM 3" => 90 mm 0.32 3.31 2" => 63 mm 0.23 2.76 5.0027NTRS119075MM 3" => 90 mm 0.32 3.54 2" 1/2 => 75 mm 0.27 2.95 5.8527NTRS1111050MM 4" =>110 mm 0.39 3.43 1" 1/2 = 50 mm 0.18 2.76 6.1027NTRS1111063MM 4" =>110 mm 0.39 3.43 2" => 63 mm 0.23 3.43 6.1027NTRS1111075MM 4" =>110 mm 0.39 3.43 2" 1/2 => 75 mm 0.27 3.07 6.1027NTRS1111090MM 4" =>110 mm 0.39 3.43 3" => 90 mm 0.32 3.54 6.1027NTRS1112550MM 5" => 125 mm 0.45 3.74 1" 1/2 = 50 mm 0.18 2.13 7.2827NTRS1112563MM 5" => 125 mm 0.45 3.74 2" => 63 mm 0.23 2.76 7.2827NTRS1112575MM 5" => 125 mm 0.45 3.74 2" 1/2 => 75 mm 0.27 2.95 7.2827NTRS1112590MM 5" => 125 mm 0.45 3.74 3" => 90 mm 0.32 3.54 7.2827NTRS11125110MM 5" => 125 mm 0.45 3.74 4" =>110 mm 0.39 3.43 7.2827NTRS1116063MM 6" => 160 mm 0.57 4.06 2" => 63 mm 0.23 2.76 7.4827NTRS1116075MM 6" => 160 mm 0.57 4.06 2" 1/2 => 75 mm 0.27 2.95 7.4827NTRS1116090MM 6" => 160 mm 0.57 4.06 3" => 90 mm 0.32 3.54 7.4827NTRS11160110MM 6" => 160 mm 0.57 4.06 4" =>110 mm 0.39 3.43 7.4827NTRS11160125MM 6" => 160 mm 0.57 4.06 5" => 125 mm 0.45 3.74 7.4827NTRS1120063MM 8" => 200 mm 0.72 4.61 2" => 63 mm 0.23 2.76 9.0627NTRS1120090MM 8" => 200 mm 0.72 4.61 3" => 90 mm 0.32 3.54 9.0627NTRS11200110MM 8" => 200 mm 0.72 4.61 4" =>110 mm 0.39 3.43 9.0627NTRS11200125MM 8" => 200 mm 0.72 4.61 5" => 125 mm 0.45 3.74 9.0627NTRS11200160MM 8" => 200 mm 0.72 4.61 6" => 160 mm 0.57 4.06 9.0627NTRS1125090MM 10" => 250 mm 0.89 5.28 3" => 90 mm 0.32 3.54 10.0427NTRS11250110MM 10" => 250 mm 0.89 5.28 4" =>110 mm 0.39 4.57 10.0427NTRS11250125MM 10" => 250 mm 0.89 5.28 5" =>125 mm 0.45 3.74 10.0427NTRS11250160MM 10" => 250 mm 0.89 5.28 6" => 160 mm 0.57 4.13 10.0427NTRS11250200MM 10" => 250 mm 0.89 5.28 8" => 200 mm 0.72 4.57 10.04

ND2S2

ND

1S1

L1L

L2


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngtf_NPT pollici\NI10127.dwg


DESC:


DRAWING No:

SHEET OF REV.NGTF_NPT

FEMALE THREADED WINGED 90°-NPT - LEAD FREE BRASS NI10127

1 1 0

D1

Thre

adD

LTh. minL2

ND

L1

L3L4

H1

H

D2

CODE ND D1 D2 D Thread L Thread min L1 L2 L3 L4 L H1 H27NGTF2038NPT 1/2 => 20 mm 0.43 0.12 1.46 3/8" NPT 0.41 0.63 1.54 2.60 2.95 2.11 1.08 1.8127NGTF2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 1.54 2.60 2.95 2.11 1.08 1.81

L


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntr_11_F pollici - SDR 11\NI10224.dwg


DESC:


DRAWING No:

SHEET OF REV.NTR11_FFEMALE SIDE FUSION REDUCER TEESDR 11 NI10224

1 3 -0

CODE ND1 ND2 S1 D L1 L2 L H1 H27NTR119040F90 3 => 90 mm 1 1/4 => 40 mm 0.32 2.48 2.95 0.87 8.98 3.66 5.4327NTR119050F90 3 => 90 mm 1 1/2 => 50 mm 0.32 2.76 2.95 0.98 9.26 3.86 5.6327NTR119063F90 3 => 90 mm 2 => 63 mm 0.32 3.54 2.95 1.14 10.04 4.17 5.9427NTR1111040F110 3 1/2 => 110 mm 1 1/4 => 40 mm 0.39 2.48 3.05 0.87 9.17 4.05 6.2227NTR1111050F110 3 1/2 => 110 mm 1 1/2 => 50 mm 0.39 2.76 3.05 0.98 9.45 4.25 6.4227NTR1111063F110 3 1/2 => 110 mm 2 => 63 mm 0.39 3.54 3.05 1.14 10.23 4.56 6.7327NTR1112540F125 4 => 125 mm 1 1/4 => 40 mm 0.45 2.48 3.35 0.87 9.76 4.35 6.8127NTR1112550F125 4 => 125 mm 1 1/2 => 50 mm 0.45 2.76 3.35 0.98 10.04 4.55 7.0127NTR1112563F125 4 => 125 mm 2 => 63 mm 0.45 3.54 3.35 1.14 10.82 4.86 7.3227NTR1112575F125 4 => 125 mm 2 1/2 => 75 mm 0.45 4.33 3.35 1.30 11.61 4.51 6.9727NTR1112590F125 4 => 125 mm 3 => 90 mm 0.45 4.88 3.35 1.46 12.16 4.31 6.7727NTR1116040F160 6 => 160 mm 1 1/4 => 40 mm 0.58 2.48 3.44 0.87 9.96 5.04 8.19

ND2D

L1

L2

L

H

H1

S1N

D1


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm_NPT pollici\NI10062.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFM_NPT

MALE THREADED ADAPTERS NPT - LEAD FREE BRASS NI10062

1 1 -1

Thre

adD

LTh. minL1

L

ND

D1

Thre

ad

D

LTh. minL1

L

LCHC

H

NDD1

Thre

adC

HD

LTh. minL1

L

NDD1

TYPE A TYPE B TYPE C LCH

CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFM2012NPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 2.17 - -27NRFM2034NPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 2.48 - -27NRFM2512NPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 2.21 - -27NRFM2534NPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.69 2.44 - -27NRFM3234NPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.79 2.70 - -27NRFM321NPT (A) 1 => 32 mm 1" NPT 0.68 0.95 2.13 0.79 2.80 - -27NRFM401NPT (C) 1 1/4 => 40 mm 1" NPT 0.68 0.95 2.21 0.87 3.39 1.34 0.5127NRFM40114NPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.71 1.30 2.56 0.87 3.58 1.65 0.5927NRFM50114NPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.71 1.30 2.76 0.98 3.66 1.65 0.5927NRFM50112NPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.72 1.50 2.95 0.98 3.68 1.97 0.5927NRFM63112NPT (C) 2 => 63 mm 1"1/2 NPT 0.72 1.50 3.47 1.14 3.84 1.97 0.5927NRFM632NPT (B) 2 => 63 mm 2" NPT 0.76 1.95 3.62 1.14 4.13 2.36 0.7127NRFM752NPT (C) 2 1/2 => 75 mm 2" NPT 0.76 1.95 4.06 1.30 4.29 2.36 0.7127NRFM75212NPT (B) 2 1/2 => 75 mm 2"1/2 NPT 1.14 2.50 4.33 1.30 4.41 3.15 0.7927NRFM903NPT (B) 3 => 90 mm 3" NPT 1.20 2.95 5.08 1.46 5.08 3.54 0.9127NRFM1104NPT (B) 3 1/2 => 110 mm 4" NPT 1.30 3.92 6.30 1.69 5.83 4.53 1.1827NRFM1254NPT (C) 4 => 125 mm 4" NPT 1.30 3.92 6.30 1.87 6.00 4.53 1.18


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff_NPT pollici\NI10061.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFF_NPT

FEMALE THREADED ADAPTERS NPT - LEAD FREE BRASS NI10061

1 1 -1

NDD1D

L1L

LTh. min

Thre

ad D

Thre

ad

NDD1

LLTh. min

LCH

L1C

H D CH

Thre

ad

NDD1

L1LTh. minL

LCHTYPE A TYPE B TYPE C

CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFF2012NPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 1.58 - -27NRFF2034NPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 1.81 - -27NRFF2512NPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 1.61 - -27NRFF2534NPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.71 1.81 - -27NRFF3234NPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.85 2.03 - -27NRFF321NPT (A) 1 => 32 mm 1" NPT 0.66 0.95 2.13 0.79 2.05 - -27NRFF401NPT (C) 1 1/4 => 40 mm 1" NPT 0.66 0.95 2.21 0.87 2.64 1.50 0.5927NRFF40114NPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.68 1.30 2.60 0.87 2.72 1.81 0.5927NRFF50114NPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.68 1.30 2.76 0.98 2.80 1.81 0.5927NRFF50112NPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.68 1.56 2.95 0.98 2.84 2.17 0.5927NRFF63112NPT (C) 2 => 63 mm 1"1/2 NPT 0.68 1.56 3.47 1.14 2.95 2.17 0.5927NRFF632NPT (B) 2 => 63 mm 2" NPT 0.70 1.97 3.62 1.14 3.15 2.56 0.7927NRFF752NPT (C) 2 1/2 =>75 mm 2" NPT 0.70 1.97 4.06 1.30 3.31 2.56 0.7927NRFF75212NPT (B) 2 1/2 =>75 mm 2"1/2 NPT 0.93 2.50 4.33 1.30 3.50 3.15 0.7927NRFF903NPT (B) 3 => 90 mm 3" NPT 1.02 2.95 5.08 1.46 3.90 3.74 0.9127NRFF1104NPT (B) 3 1/2 => 110 mm 4" NPT 1.09 3.92 6.30 1.69 4.37 4.72 1.1827NRFF1254NPT (C) 4 => 125 mm 4" NPT 1.09 3.92 6.30 1.87 4.55 4.72 1.18


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff_ss NPT pollici\NI10184.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFF_SSNPT

FEMALE THREADED ADAPTERS NPT - STAINLESS STEEL NI10184

1 1 0

NDD1D

L1L

LTh. min

Thre

ad D

Thre

ad

NDD1

LLTh. min

LCH

L1C

H D CH

Thre

ad

NDD1

L1LTh. minL

LCHTYPE A TYPE B TYPE C

CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFF2012SSNPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 1.58 - -27NRFF2034SSNPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 1.81 - -27NRFF2512SSNPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 1.61 - -27NRFF2534SSNPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.71 1.81 - -27NRFF3234SSNPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.85 2.03 - -27NRFF321SSNPT (A) 1 => 32 mm 1" NPT 0.66 0.95 2.13 0.79 2.05 - -27NRFF401SSNPT (C) 1 1/4 => 40 mm 1" NPT 0.66 0.95 2.21 0.87 2.64 1.50 0.5927NRFF40114SSNPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.68 1.30 2.60 0.87 2.72 1.81 0.5927NRFF50114SSNPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.68 1.30 2.76 0.98 2.80 1.81 0.5927NRFF50112SSNPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.68 1.56 2.95 0.98 2.84 2.17 0.5927NRFF63112SSNPT (C) 2 => 63 mm 1"1/2 NPT 0.68 1.56 3.47 1.14 2.95 2.17 0.5927NRFF632SSNPT (B) 2 => 63 mm 2" NPT 0.70 1.97 3.62 1.14 3.15 2.56 0.7927NRFF752SSNPT (C) 2 1/2 =>75 mm 2" NPT 0.70 1.97 4.06 1.30 3.31 2.56 0.7927NRFF75212SSNPT (B) 2 1/2 =>75 mm 2"1/2 NPT 0.93 2.50 4.33 1.30 3.50 3.15 0.7927NRFF903SSNPT (B) 3 => 90 mm 3" NPT 1.02 2.95 5.08 1.46 3.90 3.74 0.9127NRFF1104SSNPT (B) 3 1/2 => 110 mm 4" NPT 1.09 3.92 6.30 1.69 4.37 4.72 1.1827NRFF1254SSNPT (C) 4 => 125 mm 4" NPT 1.09 3.92 6.30 1.87 4.55 4.72 1.18


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm_ss NPT pollici\NI10186.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFM_SSNPT

MALE THREADED ADAPTERS NPT - STAINLESS STEEL NI10186

1 1 0

Thre

adD

LTh. minL1

L

ND

D1

Thre

ad

D

LTh. minL1

L

LCH

CH

NDD1

Thre

adC

HD

LTh. minL1

L

NDD1

TYPE A TYPE B TYPE C LCH

CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFM2012SSNPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 2.17 - -27NRFM2034SSNPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 2.48 - -27NRFM2512SSNPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 2.21 - -27NRFM2534SSNPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.69 2.44 - -27NRFM3234SSNPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.79 2.70 - -27NRFM321SSNPT (A) 1 => 32 mm 1" NPT 0.68 0.95 2.13 0.79 2.80 - -27NRFM401SSNPT (C) 1 1/4 => 40 mm 1" NPT 0.68 0.95 2.21 0.87 3.39 1.34 0.5127NRFM40114SSNPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.71 1.30 2.56 0.87 3.58 1.65 0.5927NRFM50114SSNPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.71 1.30 2.76 0.98 3.66 1.65 0.5927NRFM50112SSNPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.72 1.50 2.95 0.98 3.68 1.97 0.5927NRFM63112SSNPT (C) 2 => 63 mm 1"1/2 NPT 0.72 1.50 3.47 1.14 3.84 1.97 0.5927NRFM632SSNPT (B) 2 => 63 mm 2" NPT 0.76 1.95 3.62 1.14 4.13 2.36 0.7127NRFM752SSNPT (C) 2 1/2 => 75 mm 2" NPT 0.76 1.95 4.06 1.30 4.29 2.36 0.7127NRFM75212SSNPT (B) 2 1/2 => 75 mm 2"1/2 NPT 1.14 2.50 4.33 1.30 4.41 3.15 0.7927NRFM903SSNPT (B) 3 => 90 mm 3" NPT 1.20 2.95 5.08 1.46 5.08 3.54 0.9127NRFM1104SSNPT (B) 3 1/2 => 110 mm 4" NPT 1.30 3.92 6.30 1.69 5.83 4.53 1.1827NRFM1254SSNPT (C) 4 => 125 mm 4" NPT 1.30 3.92 6.30 1.87 6.00 4.53 1.18


ITEM:



DESC:


DRAWING No:

SHEET OF REV.NRFF_NPT

FEMALE THREADED ADAPTER W/NPT LEAD FREE BRASS NI10283

1 1 -2

CH

L1L

ND D

CODE SDR ND S Thread LTh. min D1 D L1 L CH LCH27NRFF732012NPT 7.3 1/2"=>20 mm 0.12 1/2" NPT 0.67 0.51 1.46 1.73 3.31 0.98 0.4327NRFF732534NPT 7.3 3/4"=>25 mm 0.12 3/4" NPT 0.71 0.71 1.61 1.73 3.39 1.18 0.4727NRFF93234NPT 9 1"=>32 mm 0.12 3/4" NPT 0.71 1.02 1.97 1.89 3.45 1.18 0.4727NRFF9321NPT 9 1"=>32 mm 0.12 1" NPT 0.83 0.94 1.97 1.89 3.58 1.50 0.5127NRFF11401NPT 11 1"1/4=>40 mm 0.15 1" NPT 0.83 0.94 1.97 2.09 3.74 1.50 0.5127NRFF1140114NPT 11 1"1/4=>40 mm 0.15 1 1/4"NPT 0.68 1.27 2.52 2.09 3.94 1.93 0.5527NRFF1150112NPT 11 1"1/2=>50 mm 0.18 1 1/2" NPT 0.75 1.50 2.76 2.40 4.25 2.17 0.5927NRFF11502NPT 11 1"1/2=>50 mm 0.18 2" NPT 0.70 1.61 3.31 2.40 4.53 2.56 0.7927NRFF1163112NPT 11 2"=>63 mm 0.23 1 1/2" NPT 0.68 2.02 2.79 2.72 4.64 2.16 0.5927NRFF11632NPT 11 2"=>63 mm 0.23 2" NPT 0.93 1.93 3.31 2.72 4.80 2.56 0.7927NRFF1175212NPT 11 2"1/2=75 mm 0.27 2 1/2" NPT 1.19 2.36 4.21 2.99 5.43 3.15 0.9827NRFF11903NPT 11 3"=>90 mm 0.32 3" NPT 1.31 2.80 4.69 3.43 6.02 3.74 0.9427NRFF111104NPT 11 4"=>110 mm 0.39 4" NPT 1.55 3.54 6.02 3.35 5.31 4.72 1.1827NRFF111254NPT 11 5"=>125 mm 0.45 4" NPT 1.55 3.90 6.02 3.74 6.97 4.72 1.18

S

LTh. min

Thre

adD

1

LCH


ITEM:



DESC:


DRAWING No:

SHEET OF REV.NRFM_NPT

MALE THREADED ADAPTER W/NPT LEAD FREE BRASS NI10282

1 1 -2

L1LTh. min

LCH

L

CH

CODE SDR ND S Thread LTh. min D1 D L1 L CH LCH27NRFM732012NPT 7.3 1/2"=>20 mm 0.12 1/2" NPT 0.52 0.51 1.42 1.73 3.94 0.87 0.4327NRFM732534NPT 7.3 3/4"=>25 mm 0.12 3/4" NPT 0.57 0.71 1.61 1.73 4.06 1.06 0.4727NRFM93234NPT 9 1"=>32 mm 0.12 3/4" NPT 0.57 0.71 1.61 1.85 4.06 1.06 0.4727NRFM9321NPT 9 1"=>32 mm 0.12 1" NPT 0.66 0.94 1.97 1.89 4.33 1.34 0.5127NRFM11401NPT 11 1"1/4=>40 mm 0.15 1" NPT 0.66 0.94 1.97 2.17 4.53 1.34 0.5127NRFM1140114NPT 11 1"1/4=>40 mm 0.15 1 1/4" NPT 0.75 1.22 2.48 2.09 4.88 1.65 0.5927NRFM1150112NPT 11 1"1/2=>50 mm 0.18 1 1/2" NPT 0.75 1.50 2.76 2.40 5.16 1.97 0.5927NRFM11502NPT 11 1"1/2=>50 mm 0.18 2" NPT 0.92 1.50 3.27 2.40 5.51 2.36 0.7127NRFM1163112NPT 11 2"=>63 mm 0.23 1 1/2" NPT 0.75 1.93 3.27 2.72 5.63 1.97 0.5927NRFM11632NPT 11 2"=>63 mm 0.23 2" NPT 0.92 1.93 3.27 2.72 5.79 2.36 0.7127NRFM1175212NPT 11 2"1/2=75 mm 0.27 2 1/2" NPT 1.05 2.36 4.21 3.15 6.42 3.15 0.7927NRFM11903NPT 11 3"=>90 mm 0.32 3" NPT 1.17 2.80 4.65 3.43 7.20 3.54 0.9127NRFM111104NPT 11 4"=>110 mm 0.39 4" NPT 1.41 3.54 6.02 3.35 7.95 4.53 1.1827NRFM111254NPT 11 5"=>125 mm 0.45 4" NPT 1.41 3.90 6.02 3.74 8.43 4.53 1.18

SD1

Thre

ad

ND D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Npr\NB10081.dwg


DESC:


DRAWING No:

SHEET OF REV.NPR RACCORDO CON ATTACCO PEX

NB10081

1 1 0

Dn

LL1

CD

CODE Dn C LC D L1 L27NPR1220 20 1/2" 18,5 37 16 4027NPR1225 25 1/2" 18,5 37 17 4127NPR3425 25 3/4" 24,5 42 17 4627NPR132 32 1" 30,5 54 20 52

LC


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncua_L\NB10090.dwg


DESC:


DRAWING No:

SHEET OF REV.NCUA_L COPPER ADAPTER WITH SOCKET

FUSION ENDS NB10090

1 1 0

L1

Dn1D

Dn2

CODE Dn1 Dn2 D L1 L27NCUA12C20L 20 1/2" CTS 37 16 5727NCUA34C25L 25 3/4" CTS 42 17 6327NCUA1C32L 32 1" CTS 54 20 76


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Npr11\NI10351.dwg


DESC:


DRAWING No:

SHEET OF REV.NPR11 PEX ADAPTER LONG SPIGOT

SDR11 NI10351

1 1 0

CODE ND S C LC L1 L D27NPR111220 1/2" => 20 mm 0.12 1/2" 0.73 1.73 3.71 1.4227NPR111225 3/4" => 25 mm 0.12 1/2" 0.73 1.73 3.74 1.6127NPR113425 3/4" => 25 mm 0.12 3/4" 0.96 1.73 3.97 1.6127NPR110132 1" => 32 mm 0.12 1" 1.20 1.89 4.36 1.9727NPR1111432 1" => 32 mm 0.12 1"1/4 1.44 1.89 4.60 1.9727NPR1111240 1"1/4 => 40 mm 0.15 1"1/2 1.70 2.09 5.24 2.4827NPR110250 1"1/2"=> 50 mm 0.18 2" 2.13 2.40 5.98 2.76

DND

S

L1L

LC

C

PRODUCT RANGE

COPPER STUB OUT TRANSITION FITTINGCODE inchesNCUT_L from ½”x½” to 1”x 1”CTS

COPPER STUB OUT ELBOW TRANSITION FITTINGCODE inchesNCUTC_L from ½”x½” to 1”x 1”CTS

GROOVED MECHANICAL COUPLING ADAPTERCODE inchesNRV STAINLESS STEELSDR 11from 1½”x 1½” to 5”x4”CARBON STEEL SDR 11 from 6”x 6” to 12”x12”

ALL-PLASTIC UNIONS WITH SOCKET FUSION ENDSCODE inchesNBRF from ½” to 1¼”

UNION W/STANDARD BRASS NUTS AND SOCKET FUSION ENDSCODE inchesNCSJ from ½”x ½” to 2”x2”

INSTABRANCHTM WELDING SOCKLET W/SOCKET FUSION OUTLETCODE inchesNGS from 1½”x1¼” to 3”x14”

INSTABRANCHTM WELDING SOCKLET W/SOCKET FEMALE OUTLETCODE inchesNGSF (W/LEAD FREE BRASS)NGSF_L (STANDARD BRASS)NGSF_SS (W/NPT STAINLESS STEEL) from 1¼”x1½” to 24”x1” NPT

INSTAHEADERTM PEX ADAPTER (COLD EXPANSION - ASTM F 1960)CODE inchesNPGS from 1¼”x½” to 5”x1”

INSTAHEADERTM PEX ADAPTER (CRIMP RING - ASTM F 1807)CODE inchesNPGSCR from 1¼”x½” to 5”x1”

END CAPCODE inchesNCC (SOCKET FUSION) from ½” to 5”NCC_M (LONG SPIGOT)SDR 7.3 from 6” to 10”SDR 11 - 17 from 2” to 24”NCC_MS (SHORT SPIGOT)SDR 7.3-11-17 from 10” to 24”

STUB FLANGECODE inchesNCOSA (SOCKET FUSION) from 1” to 5”NCRT (LONG SPIGOT)SDR 7.3 from 1” to 10”SDR 11 from 1” to 20”SDR 17 from 2” to 24”NCRT_S (SHORT SPIGOT)SDR 7.3 from 4” to 10”SDR 11 from 14” to 20”SDR 17 from 14” to 24”

BACKING RING ANSI/ASA 150CODE inchesFLAACPP from 1” to 10”FLAVN from 12” to 22”FLAAC 24”

GASKET LOW - STRESS EPDMCODE inchesGRET from 1” x 24”

ANCHOR POINTCODE inchesNAP from 6” x 12”

ELECTROFUSION FITTINGS

ELECTROFUSION COUPLINGCODE inches

NME SDR 7.3 from ½” to 10”SDR 11 from 3” to 20”SDR 17 from 6” to 24”

ELECTROFUSION REDUCERCODE inchesNRDE SDR 11 from ½”x ¾” to 10”x 8”

ELECTROFUSION 30° ELBOWCODE inchesNCEM30 SDR 11 from 3” to 8”

ELECTROFUSION 45° ELBOWCODE inchesNCEM SDR 11 from 1” to 10”

ELECTROFUSION 90° ELBOWCODE inchesNGEM SDR 11 from ½” to 10”

ELECTROFUSION TEECODE inchesNTCE SDR 11 from ½” to 8”

ELECTROLETTM BRANCH FITTINGSCODE inchesNCOL SDR 11 from 1¼”x¾” to12”x5”HIGH VOLUMEfrom 8”x3” to 24”x6”

NCOL_PR WITH PEX ADAPTERSDR 11 from 1¼”x½” to 12”x4”

NCOLF_F FEMALE THREADEDSDR 11 from 1¼”x½” to 12”x4”NCOLM_F MALE THREADEDSDR 11 from 1¼”x½” to 12”x 2”

NCOLVPR W/VALVE PEX ADAPTERSDR 11 from 1¼”x½” to 12”x1”

NCOLTLV W/VALVE PEX ADAPTERHIGH VOLUMEfrom 14”x 2” to 24”x3”

VALVES

PPR TRUE UNION BALL VALVE - SOCKET ENDSCODE inchesNRSPPRCT from ½” to 4”

PPR TRUE UNION BALL VALVE - SPIGOT ENDSCODE inchesNRSPPRCTSSDR 11 from ¾” to 4”

STANDARD BRASS - TRUE UNION BALL VALVECODE inchesNRSFN from 1¼” to 2”

PP-RCT COMPRESSION FITTING

COUPLINGCODE inches

NKMAN from ½” to 4”

90° ELBOWCODE inches

NKG from ½” to 4”

REDUCERCODE inchesNKR from ¾”x½” to 4”x3"

90° TEECODE inchesNKT from ½” to 4”


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nme pollici\NI10164.dwg


DESC:


DRAWING No:

SHEET OF REV.NME ELECTROFUSION COUPLINGS

NI10164

1 1 0

CODE ND L1 L H D27NME20 1/2 => 20 mm 1.34 2.76 2.05 1.3027NME25 3/4 => 25 mm 1.34 2.76 2.28 1.5227NME32 1 => 32 mm 1.34 2.76 2.56 1.7927NME40 1 1/4 => 40 mm 1.61 3.35 2.95 2.1727NME50 1 1/2 => 50 mm 1.67 3.47 3.43 2.6827NME63 2 => 63 mm 1.67 3.86 3.94 3.2327NME75 2 1/2 => 75 mm 2.40 4.92 4.49 3.8627NME90 3 => 90 mm 2.84 5.75 5.12 4.4527NME110 3 1/2 => 110 mm 3.03 6.10 5.67 5.3527NME125 4 => 125 mm 3.23 6.54 6.58 6.1627NME160 6 => 160 mm 3.41 6.89 7.93 7.4827NME200 8 => 200 mm 3.60 7.28 9.57 9.1327NME250 10 => 250 mm 4.17 8.35 11.81 11.6527NME315 12 => 315 mm 4.72 9.45 14.69 14.67

ND

L1

L

H

D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrde pollici\NI10201.dwg


DESC:


DRAWING No:

SHEET OF REV.NRDE ELECTROFUSION REDUCER

NI10201

2 2 0

CODE ND1 ND2 D L1 L2 L3 L H27NRDE4032 1 1/4=> 40 mm 1 => 32 mm 2.17 1.85 1.65 - 3.74 2.9127NRDE5032 1 1/2 => 50 mm 1 => 32 mm 2.52 1.95 1.63 - 3.94 3.3527NRDE5040 1 1/2 => 50 mm 1 1/4=> 40 mm 2.52 1.95 1.87 - 4.06 3.3527NRDE6332 2 => 63 mm 1 => 32 mm 3.21 2.19 1.65 - 4.65 3.9027NRDE6340 2 => 63 mm 1 1/4=> 40 mm 3.21 2.17 1.77 - 4.65 3.9027NRDE6350 2 => 63 mm 1 1/2 => 50 mm 3.21 2.19 1.97 - 4.65 3.9027NRDE7563 2 1/2 => 75 mm 2 => 63 mm 3.82 2.36 2.24 - 4.92 4.4927NRDE9063 3 => 90 mm 2 => 63 mm 4.53 2.68 2.44 - 5.91 5.1627NRDE1163 3 1/2 => 110 mm 2 => 63 mm 5.31 2.85 2.48 - 6.30 5.9327NRDE1190 3 1/2 => 110 mm 3 => 90 mm 5.31 2.87 2.70 - 6.22 5.93

ND

1

ND

2

D

H

L1 L2

L


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngem pollici\NI10161.dwg


DESC:


DRAWING No:

SHEET OF REV.NGEM ELECTROFUSION 90° ELBOW

NI10161

1 1 -1

CODE ND L1 L2 L H27NGEM20 (A) 1/2 => 20 mm 1.34 1.99 2.05 3.7627NGEM25 (A) 3/4 => 25 mm 1.46 2.13 2.24 4.0227NGEM32 (B) 1 => 32 mm 1.34 2.26 2.52 3.1527NGEM40 (B) 1 1/4 => 40 mm 1.61 2.56 2.87 3.6027NGEM50 (B) 1 1/2 => 50 mm 1.89 3.03 3.31 4.3127NGEM63 (B) 2 => 63 mm 2.09 3.46 3.94 5.0827NGEM75 (B) 2 1/2 => 75 mm 2.28 3.82 4.33 5.5927NGEM90 (B) 3 => 90 mm 3.07 4.69 5.24 6.9327NGEM110 (B) 3 1/2 => 110 mm 3.27 5.67 6.46 8.43

TYPE A TYPE B

TYPE A

TYPE B

L1L2

DN

L

H ND

L1L2

L

H


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncem pollici\NI10162.dwg


DESC:


DRAWING No:

SHEET OF REV.NCEM ELECTROFUSION 45° ELBOW

NI10162

1 1 -1

CODE ND L1 L2 L H27NCEM32 1 => 32 mm 1.41 1.83 2.54 3.7027NCEM40 1 1/4 => 40 mm 1.61 2.11 2.95 4.2927NCEM50 1 1/2 => 50 mm 1.89 2.46 3.27 5.0427NCEM63 2 => 63 mm 2.09 2.68 3.94 5.7927NCEM75 2 1/2 => 75 mm 2.36 3.19 4.45 6.6527NCEM90 3 => 90 mm 2.76 3.90 5.28 8.1927NCEM110 3 1/2 => 110 mm 3.27 4.49 6.36 9.49

NDL1

L2

L

H


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkman pollici\NI10214.dwg


DESC:


DRAWING No:

SHEET OF REV.NKMAN COUPLER - COMPRESSION FITTINGS

NI10214

1 1 -1

ND

L

L1

H

CODE ND L1 L H03NKMAN20 1/2 => 20 mm 2.07 4.69 1.7703NKMAN25 3/4 => 25 mm 2.15 4.69 2.0903NKMAN32 1 => 32 mm 2.46 5.43 2.5403NKMAN40 1 1/4 => 40 mm 3.15 6.59 3.2903NKMAN50 1 1/2 => 50 mm 3.54 7.24 3.7803NKMAN63 2 => 63 mm 4.33 8.84 4.4503NKMAN75 2 1/2 => 75 mm 4.76 9.69 5.2003NKMAN90 3 => 90 mm 5.67 11.73 5.9303NKMAN110 3 1/2 => 110 mm 6.91 14.33 6.97


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkg pollici\NI10216.dwg


DESC:


DRAWING No:

SHEET OF REV.NKG 90° ELBOW - COMPRESSION FITTINGS

NI10216

1 1 -1

ND

L1

H1

H

L

CODE ND L1 L H1 H03NKG20 1/2 => 20 mm 2.07 3.68 2.72 3.6803NKG25 3/4 => 25 mm 2.15 3.94 2.87 3.9403NKG32 1 => 32 mm 2.46 4.72 3.39 4.7203NKG40 1 1/4 => 40 mm 3.15 5.98 4.29 5.9803NKG50 1 1/2 => 50 mm 3.54 6.61 4.80 6.6103NKG63 2 => 63 mm 4.33 7.91 5.79 7.9103NKG75 2 1/2 => 75 mm 4.76 9.29 6.69 9.2903NKG90 3 => 90 mm 5.67 11.10 8.15 11.1003NKG110 3 1/2 => 110 mm 6.91 13.05 9.57 13.05


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkr pollici\NI10215.dwg


DESC:


DRAWING No:

SHEET OF REV.NKR REDUCER - COMPRESSION FITTINGS

NI10215

1 1 -1

L

L1 L2

ND

1

ND

2

H

CODE ND1 ND2 L1 L2 L H03NKR2520 3/4 => 25 mm 1/2 => 20 mm 2.15 2.07 4.37 2.0903NKR3220 1 => 32 mm 1/2 => 20 mm 62,5 2.07 5.06 2.5403NKR3225 1 => 32 mm 3/4 => 25 mm 62,5 2.15 5.08 2.5403NKR4025 1 1/4 => 40 mm 3/4 => 25 mm 3.15 2.15 5.71 3.2903NKR4032 1 1/4 => 40 mm 1 => 32 mm 3.15 2.46 5.71 3.2903NKR5032 1 1/2 => 50 mm 1 => 32 mm 3.54 2.46 6.42 3.7803NKR5040 1 1/2 => 50 mm 1 1/4 => 40 mm 3.54 3.15 6.30 3.7803NKR6332 2 => 63 mm 1 => 32 mm 4.33 2.46 7.36 4.4503NKR6340 2 => 63 mm 1 1/4 => 40 mm 4.33 3.15 8.03 4.4503NKR6350 2 => 63 mm 1 1/2 => 50 mm 4.33 3.54 8.98 4.4503NKR7550 2 1/2 => 75 mm 1 1/2 => 50 mm 4.76 3.54 9.00 5.2003NKR7563 2 1/2 => 75 mm 2 => 63 mm 4.76 4.33 9.17 5.2003NKR9063 3 => 90 mm 2 => 63 mm 5.67 4.33 10.02 5.9803NKR9075 3 => 90 mm 2 1/2 => 75 mm 5.67 4.76 11.44 5.9803NKR11090 3 1/2 => 110 mm 3 => 90 mm 6.91 5.67 13.01 7.13


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkt pollici\NI10217.dwg


DESC:


DRAWING No:

SHEET OF REV.NKT 90° TEE - COMPRESSION FITTINGS

NI10217

1 1 -1

ND

L

L2

H1

H

L1

CODE ND L1 L2 L H1 H03NKT20 1/2 => 20 mm 2.07 2.68 5.35 2.68 3.6003NKT25 3/4 => 25 mm 2.15 2.87 5.75 2.87 3.8603NKT32 1 => 32 mm 2.46 3.43 6.85 3.43 4.6503NKT40 1 1/4 => 40 mm 3.15 4.25 8.50 4.25 5.9803NKT50 1 1/2 => 50 mm 3.54 4.80 9.61 4.80 6.8903NKT63 2 => 63 mm 4.33 5.71 11.42 5.71 7.7603NKT75 2 1/2 => 75 mm 4.76 6.61 13.23 6.61 9.2103NKT90 3 => 90 mm 5.67 8.15 16.30 8.15 11.0803NKT110 3 1/2 => 110 mm 6.91 9.61 19.21 9.61 13.09

PRODUCT RANGE


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nbrf pollici\NI10150.dwg


DESC:


DRAWING No:

SHEET OF REV.NBRF ALL-PLASTIC UNIONS WITH SOCKET

FUSION ENDS NI10150

1 1 0

ND

1

ND

2

D1 D

L1 L2

L

CODE ND1 ND2 D1 D L1 L2 L27NBRF20 1/2 => 20 mm 1/2 => 20 mm 0.55 2.09 0.79 0.79 2.8727NBRF25 3/4 => 25 mm 3/4 => 25 mm 0.71 2.24 0.79 0.79 2.7627NBRF32 1 => 32 mm 1 => 32 mm 0.95 2.64 0.79 0.79 2.7627NBRF40 1 1/4 => 40 mm 1 1/4 => 40 mm 1.14 3.03 0.79 0.79 2.76


ITEM:



DESC:


DRAWING No:

SHEET OF REV.NRV VICTAULIC ADAPTER INDUSTRIAL

BRASS - LONG SPIGOT - SDR11 NI10244

1 2 -3

S

D

Thre

ad

LTh. min L1

L

CODE ND S Thread L Thread min L1 L D27NRV5011 1" 1/2 => 50 mm 0.18 1" 1/2 1.07 2.40 4.89 2.7627NRV6311 2" => 63 mm 0.23 2" 1.18 2.72 5.24 3.2727NRV7511 2" 1/2 => 75 mm 0.27 2" 1/2 1.47 3.15 6.05 4.2127NRV9011 3" => 90 mm 0.32 3" 1.18 3.43 6.26 4.6527NRV11011 4" => 110 mm 0.39 4" 1.57 3.35 6.89 6.0227NRV12511 5" => 125 mm 0.45 4" 1.57 3.74 7.36 6.02

ND


ITEM:

C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Accessories\NI10199.dwg


DESC:


DRAWING No:

SHEET OF REV.FLAACPPPP ENCAPSULATED BACKING RING ANSI/ASA 150 NI10199

1 3 -5

CODE ND (PP) OD ID PCD T holes N° holes00FLAACPP321 1" => 32 mm 4.25 1.73 3.13 0.63 0.63 400FLAACPP40114 1" 1/4 => 40 mm 4.61 2.05 3.50 0.63 0.63 400FLAACPP50112 1" 1/2 => 50 mm 5.00 2.44 3.88 0.71 0.63 400FLAACPP632 2" => 63 mm 5.98 3.07 4.74 0.71 0.79 400FLAACPP75212 2" 1/2 => 75 mm 7.01 3.62 5.49 0.71 0.79 400FLAACPP903 3" => 90 mm 7.52 4.33 5.98 0.79 0.79 400FLAACPP1104 4" => 110 mm 9.00 5.24 7.50 0.79 0.79 800FLAACPP1254 5" => 125 mm 9.00 5.83 7.50 0.79 0.75 800FLAACPP1606 6" => 160 mm 10.98 7.01 9.49 1.02 0.91 800FLAACPP2008 8" => 200 mm 13.50 9.25 11.75 1.02 0.91 800FLAACPP25010 10" => 250 mm 15.98 11.42 14.25 1.18 1.00 1200FLAACPP63024 24" => 630 mm 32.00 25.08 29.50 1.81 1.37 20

IDPCD

OD

hole

s

T


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncem30\NI10345.dwg


DESC:


DRAWING No:

SHEET OF REV.NCEM30 ELECTROFUSION ELBOW 30°

SDR11 NI10345

1 1 0

ND

D

L1 L2

L

H

CODE ND D L1 L2 L H27NCEM030090 3" = > 90 mm 4.69 2.76 3.69 5.28 8.2327NCEM030110 4" => 110 mm 5.28 3.27 4.21 6.06 9.1727NCEM030125 5" => 125 mm 6.28 3.49 4.51 6.79 10.4127NCEM030160 6" => 160 mm 7.56 3.43 4.88 8.21 10.9827NCEM030200 8" => 200 mm 9.53 3.84 5.88 9.86 13.28


ITEM:

C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Valves\NI10212.dwg


DESC:


DRAWING No:

SHEET OF REV.NRSPPVKDVALVOLA A SFERA 2 VIE ATTACCHI FEMMINA CON MANIGLIATWO OUTLET BALL VALVE

NI10212

2 2 -1

L2

DDn

H1

H

LL1

CODE ND L2 L1 L D H1 H27NRSPPVKD040 1 1/4 => 40 mm 4.25 3.94 5.55 3.39 3.25 5.0627NRSPPVKD050 1 1/2 => 50 mm 4.25 4.61 6.46 3.86 3.50 5.5527NRSPPVKD063 2 => 63 mm 5.28 5.67 7.83 4.81 4.25 6.6927NRSPPVKD075 2 1/2 => 75 mm 8.86 6.02 8.39 6.38 6.46 9.8827NRSPPVKD090 3 => 90 mm 12.87 6.81 9.41 7.95 6.97 11.1027NRSPPVKD110 4 => 110 mm 15.16 7.83 10.55 9.29 7.68 12.76


ITEM:

C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Valves\NI10212.dwg


DESC:


DRAWING No:

SHEET OF REV.NRSPPRCTPPR TRUE UNION BALL VALVE SOCKET FUSION NI10212

1 2 -1

CODE ND L2 L1 L D H1 H27NRSPPRCT20 1/2 => 20 mm 3.62 4.28 4.90 2.82 2.69 4.1727NRSPPRCT25 3/4 => 25 mm 3.62 4.28 4.96 2.82 2.69 4.1727NRSPPRCT32 1 => 32 mm 3.62 4.28 5.03 2.82 2.69 4.17

L2

H

H1

LL1

ND D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrspps\NI10335.dwg


DESC:


DRAWING No:

SHEET OF REV.NRSPPRCTSPPR TRUE UNION BALL VALVE SPIGOT END NI10335

1 1 0

CODE ND L2 L1 L D H1 H27NRSPPRCTS25 3/4" => 25 mm 3.62 4.28 9.24 2.82 2.69 4.1727NRSPPRCTS32 1 => 32 mm 3.62 4.28 9.16 2.82 2.69 4.1727NRSPPRCTS40 1"1/4 => 40 mm 3.62 4.28 10.66 2.82 2.69 4.17

L2

H1

H

L1L

ND D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncut_L\NB10092.dwg


DESC:


DRAWING No:

SHEET OF REV.NCUT_L COPPER STUB OUT TRANSITION

FITTING WITH SOCKET END NB10092

1 1 0

DD

n1

L1

CODE Dn1 Dn2 D L127NCUT12C20L 20 1/2" CTS 37 1627NCUT34C25L 25 3/4" CTS 42 1727NCUT1C32L 32 1" CTS 54 20

Dn2


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncutc_L\NB10093.dwg


DESC:


DRAWING No:

SHEET OF REV.NCUTC_L COPPER STUB OUT ELBOW

TRANSITION FITTING WITH SOCKET FUSION ENDS

NB10093

1 1 0

CODE Dn1 Dn2 D L127NCUTC12C20L 20 1/2" CTS 37 1627NCUTC34C25L 25 3/4" CTS 42 1727NCUTC1C32L 32 1" CTS 54 20

ND2

L1

DND1


ITEM:

C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion Fittings\NI10243.dwg


DESC:


DRAWING No:

SHEET OF REV.NGS WELDING SADDLES W/SOCKET

FUSION OUTLETS NI10243

1 4 -3

CODE ND1 ND2 D1 D L1 L2 L27NGS2040 1/2" => 20 mm 1 ¼" => 40 mm 0.98 1.38 0.59 0.79 1.4427NGS2050 1/2" => 20 mm 1 ½" = > 50 mm 0.98 1.38 0.59 0.79 1.2827NGS206375 1/2" => 20 mm 2"= > 63 mm

2 ½" = > 75 mm 0.98 1.38 0.59 0.79 1.20

27NGS2090110125 1/2" => 20 mm3" = > 90 mm4" = > 110 mm5" = > 125 mm

0.98 1.38 0.59 0.79 1.16

27NGS20160200 1/2" => 20 mm 6" = > 160 mm8" = > 200 mm 0.98 1.38 0.59 0.79 1.12

27NGS20250315 1/2" => 20 mm 10" = > 250 mm12" = > 315 mm 0.98 1.38 0.59 0.79 1.10

27NGS20355630 1/2" => 20 mm 14"-24" => 355-630 mm 0.98 1.38 0.59 0.79 1.10

27NGS2540 3/4" => 25 mm 1 ¼" => 40 mm 0.98 1.38 0.59 0.85 1.5027NGS2550 3/4" => 25 mm 1 ½" = > 50 mm 0.98 1.38 0.59 0.85 1.3327NGS256375 3/4" => 25 mm 2"= > 63 mm

2 ½" = > 75 mm 0.98 1.38 0.65 0.85 1.26

27NGS2590110125 3/4" => 25 mm3" = > 90 mm4" = > 110 mm5" = > 125 mm

0.98 1.38 0.65 0.85 1.18

27NGS25160200 3/4" => 25 mm 6" = > 160 mm8" = > 200 mm 0.98 1.38 0.65 0.85 1.18

27NGS25250315 3/4" => 25 mm 10" = > 250 mm12" => 315 mm 0.98 1.38 0.65 0.85 1.16

27NGS25355630 3/4" => 25 mm 14"-24" => 355-630 mm 0.98 1.38 0.65 0.85 1.16

D1

L2L1

L

ND2

ND

1 D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncsj pollici\NI10230.dwg


DESC:


DRAWING No:

SHEET OF REV.NCSJ UNION W/STANDARD BRASS NUTS

AND SOCKET ENDS NI10230

1 1 0

L1

ND

D1

L

CH

1

CH

2

CODE ND D1 L1 L CH1 CH227NCSJ2020 1/2" - 1/2" => 20-20 mm 0.59 0.55 3.11 1.18 1.8127NCSJ2525 3/4" - 3/4" => 25-25 mm 0.75 0.63 3.35 1.50 2.0527NCSJ3232 1" - 1" => 32-32 mm 1.02 0.71 4.17 1.97 2.6827NCSJ4040 1" 1/4 - 1" 1/4 => 40-40 mm 1.30 0.87 4.72 2.12 3.1527NCSJ5050 1" 1/2 - 1" 1/2 => 50-50 mm 1.69 0.94 5.12 2.79 3.8227NCSJ6363 2" - 2" => 63-63 mm 2.05 1.10 6.02 3.15 4.29


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngsf_NPT pollici\NI10145.dwg


DESC:


DRAWING No:

SHEET OF REV.NGSF_NPT

FEMALE THREADED SADDLE - LEAD FREE BRASS NI10145

1 1 0

NDD

1S

LTh. min

L

D

CODE ND S Thread L Thread min D1 D2 D L1 L27NGSF4012NPT 1 1/4 = 40 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF5012NPT 1 1/2 = 50 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF6312NPT 2 => 63 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8327NGSF7512NPT 2 1/2 => 75 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.7727NGSF9012NPT 3 => 90 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8427NGSF11012NPT 3 1/2 => 110 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.9427NGSF5034NPT 1 1/2 = 50 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.71 1.63 2.0527NGSF6334NPT 2 => 63 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8327NGSF7534NPT 2 1/2 => 75 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.7727NGSF9034NPT 3 => 90 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8427NGSF11034NPT 3 1/2 => 110 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.9627NGSF631NPT 2 => 63 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.2627NGSF751NPT 2 1/2 => 75 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1427NGSF901NPT 3 => 90 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1827NGSF1101NPT 3 1/2 => 110 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.27

L1


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngsf_ss NPT pollici\NI10187.dwg


DESC:


DRAWING No:

SHEET OF REV.NGSF_SSNPT

FEMALE THREADED SADDLE - STAINLESS STEEL NI10187

1 1 0

NDD

1S

LTh. min

L

D

CODE ND S Thread L Thread min D1 D2 D L1 L27NGSF4012SSNPT 1 1/4 = 40 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF5012SSNPT 1 1/2 = 50 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF6312SSNPT 2 => 63 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8327NGSF7512SSNPT 2 1/2 => 75 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.7727NGSF9012SSNPT 3 => 90 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8427NGSF11012SSNPT 3 1/2 => 110 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.9427NGSF5034SSNPT 1 1/2 = 50 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.71 1.63 2.0527NGSF6334SSNPT 2 => 63 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8327NGSF7534SSNPT 2 1/2 => 75 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.7727NGSF9034SSNPT 3 => 90 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8427NGSF11034SSNPT 3 1/2 => 110 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.9627NGSF631SSNPT 2 => 63 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.2627NGSF751SSNPT 2 1/2 => 75 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1427NGSF901SSNPT 3 => 90 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1827NGSF1101SSNPT 3 1/2 => 110 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.27

L1


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Npgs pollici\NI10284.dwg


DESC:


DRAWING No:

SHEET OF REV.NPGS PEX ADAPTER (CRIMP) FUSION

WELDING SADDLE NI10284

1 1 0

ND

D1 DC

L1

L

CODE ND C D1 D L1 L27NPGS124050 1" 1/4 => 40 mm

1" 1/2 => 50 mm 1/2" 0.98 1.46 1.24 1.77

27NPGS126375 2" => 63 mm2" 1/2 => 75 mm 1/2" 0.98 1.46 1.24 1.65

27NPGS12901101253" => 90 mm4" => 110 mm5" => 125 mm

1/2" 0.98 1.46 1.24 1.61

27NPGS344050 1" 1/4 => 40 mm1" 1/2 => 50 mm 3/4" 0.98 1.65 1.32 1.85

27NPGS346375 2" => 63 mm2" 1/2 => 75 mm 3/4" 0.98 1.65 1.32 1.73

27NPGS34901101253" => 90 mm4" => 110 mm5" => 125 mm

3/4" 0.98 1.65 1.32 1.69

27NPGS16375 2" => 63 mm2" 1/2 => 75 mm 1" 1.26 2.13 1.50 2.05

27NPGS1901101253" => 90 mm4" => 110 mm5" => 125 mm

1" 1.26 2.13 1.50 1.97


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncc pollici\NI10149.dwg


DESC:


DRAWING No:

SHEET OF REV.NCC END CAP SOCKET FUSION

NI10149

1 1 0

ND

D

L1L

S

CODE ND S D L1 L27NCC20 1/2 => 20 mm 0.13 1.18 0.67 1.1427NCC25 3/4 => 25 mm 0.17 1.40 0.71 1.3427NCC32 1 => 32 mm 0.21 1.77 0.79 1.5827NCC40 1 1/4 => 40 mm 0.26 2.13 0.87 1.6527NCC50 1 1/2 => 50 mm 0.33 2.60 1.00 1.8927NCC63 2 => 63 mm 0.41 3.27 1.34 2.2127NCC75 2 1/2 => 75 mm 0.49 3.90 1.69 2.4027NCC90 3 => 90 mm 0.59 4.69 1.34 2.6827NCC110 3 1/2 => 110 mm 0.72 5.79 1.46 3.1127NCC125 4 => 125 mm 0.82 6.38 1.58 3.43


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncc_11MS pollici - SDR 11\NI10225.dwg


DESC:


DRAWING No:

SHEET OF REV.NCC_11MS

END CAP - SHORT SPIGOTSDR 11 NI10225

1 1 -1

CODE ND S L27NCC25011MS 10" => 250 mm 0.89 1.9727NCC31511MS 12" => 315 mm 1.13 1.9727NCC35511MS 14" => 355 mm 1.27 3.1527NCC40011MS 16" => 400 mm 1.43 3.1527NCC45011MS 18" => 450 mm 1.61 3.1527NCC50011MS 20" => 500 mm 1.79 3.1527NCC56011MS 22" => 560 mm 2.00 3.1527NCC63011MS 24" => 630 mm 2.25 3.15

ND

S

L


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Npgscr\NB10094.dwg


DESC:


DRAWING No:

SHEET OF REV.NPGSCR INSTAHEADER PEX ADAPTER (CRIMP

RING - ASTM F 1807) FUSION WELDING SOCKLET

NB10094

1 1 0

D1

Dn

C D

L

L1

CODE Dn C D1 D L1 L27NPGSCR124050 40-50 1/2" 25 37 31,5 4527NPGSCR126375 63-75 1/2" 25 37 31,5 4227NPGSCR1290110125 90-110-125 1/2" 25 37 31,5 4127NPGSCR344050 40-50 3/4" 25 42 33,5 4727NPGSCR346375 63-75 3/4" 25 42 33,5 4427NPGSCR3490110125 90-110-125 3/4" 25 42 33,5 4327NPGSCR16375 63-75 1" 32 54 38 5227NPGSCR190110125 90-110-125 1" 32 54 38 50


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncosa pollici\NI10158.dwg


DESC:


DRAWING No:

SHEET OF REV.NCOSA STUB FLANGE SOCKET FUSION

NI10158

1 2 0

ND

D2

D1

D

L1

L

CODE ND D1 D2 D L1 L27NCOSA32 1 => 32 mm 1.10 1.60 2.01 0.71 1.0227NCOSA40 1 1/4 => 40 mm 1.42 1.95 2.52 0.81 1.1827NCOSA50 1 1/2 => 50 mm 1.83 2.40 2.88 0.93 1.3427NCOSA63 2 => 63 mm 2.22 2.99 3.56 1.08 1.5027NCOSA75 2 1/2 => 75 mm 2.80 3.54 4.11 1.18 1.65


ITEM:

C:\Vault_Temp\Disegni\Schede Tecniche\Niron Beta\Butt fusion fittings\NB10042.dwg


DESC:

All right reserved - Drawing cannot be reproduced in anyway, failure to do so will entitle Nupi Industrie italiane to legal action. Information on this document are subject to change without notice

DRAWING No:

SHEET OF REV.NCRT_11COLLARE A SALDARE CODOLO LUNGOSDR11 STUB FLANGE - LONG SPIGOTSDR11

NB10042

1 2 -1

CODE Dn S min D D1 L1 L2 L27NCRT3211 32 3,0 68 40 45 10 7827NCRT4011 40 3,7 78 50 63 11 9527NCRT5011 50 4,6 88 61 65 12 9627NCRT6311 63 5,8 102 75 75 14 11627NCRT7511 75 6,8 122 89 84 16 12227NCRT9011 90 8,2 133 105 100 17 154,527NCRT11011 110 10,0 158 125 98,5 18 15027NCRT12511 125 11,4 158 132 122 25 17827NCRT16011 160 14,6 212 175 105 25 18027NCRT20011 200 18,2 268 230 114.5 32 187.7527NCRT25011 250 22,9 318 271.4 132 33.5 20827NCART31511 315 28,8 370 320.8 136 45 205

CODE Dn S min D D1 L1 L2 L B α27NCRT3211 32 3,0 63 41 44 10 78 32 55°27NCRT4011 40 3,7 72 49 63 11 96 40 55°27NCRT5011 50 4,6 82 60 65 12 97 50 55°27NCRT6311 63 5,8 100 74 75 15 117 63 55°27NCRT7511 75 6,8 119 87 87 16 126 75 55°27NCRT9011 90 8,2 131 105 103 17 142 90 55°27NCRT11011 110 10,0 158 125 114 18 159 110 55°27NCRT12511 125 11,4 158 131 122 25 179 120 65°27NCRT16011 160 14,6 212 175 105 24 180 158 65°27NCRT20011 200 18,2 268 230 115 32 188 208 65°27NCRT25011 250 22,9 318 271 132 34 208 259 65°27NCRT31511 315 28,8 370 321 136 45 205 310 67,5°

Dn

D1

L1

S m

in

D B α

L2L


ITEM:

C:\Users\Abassi\Desktop\NAP_73.dwg


DESC:

All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle Nupi Americas to legal action. Information on this document are subject to change without notice

DRAWING No:

SHEET OF REV.NAP_73 ANCHOR POINTS

SDR7.3 NAP_73

1 1 -0

CODE ND1 S min D1 D2 L1 L2 L27NAP16073 6" => 160 mm 0.87 6.69 8.23 1.58 7.64 15.7527NAP20073 8" => 200 mm 1.08 8.66 9.60 1.58 10.24 17.3327NAP25073 10" => 250 mm 1.35 10.75 12.28 2.25 10.43 18.7027NAP31573 12" => 315 mm 1.71 12.76 14.72 2.25 12.60 20.47

NDD2

D1

L1L2L

S m

in


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntce pollici\NI10200.dwg


DESC:


DRAWING No:

SHEET OF REV.NTCE SINGLE-WIRE ELECTROFUSION

EQUAL TEE WITH SPIGOT END NI10200

1 1 0

ND

1

L2

LL1

SND2

HH

1

L3

CODE ND1 ND2 S D L1 L2 L3 L H1 H27NTCE020 1/2 => 20 mm 1/2 => 20 mm 0.12 1.26 1.48 1.81 2.05 1.77 2.62 3.2727NTCE025 3/4 => 25 mm 3/4 => 25 mm 0.12 1.46 1.48 1.81 2.24 1.97 2.70 3.4327NTCE032 1 => 32 mm 1 => 32 mm 0.12 1.73 1.48 1.85 2.52 2.17 2.95 3.8027NTCE040 1 1/4 => 40 mm 1 1/4 => 40 mm 0.15 2.13 1.73 2.13 2.91 2.62 3.31 4.3727NTCE050 1 1/2 => 50 mm 1 1/2 => 50 mm 0.18 2.56 1.83 2.40 3.35 3.01 3.94 5.2627NTCE063 2 => 63 mm 2 => 63 mm 0.23 3.15 2.24 2.68 3.90 3.54 4.53 6.1427NTCE075 2 1/2 => 75 mm 2 1/2 => 75 mm 0.27 3.74 2.28 2.83 4.41 3.86 5.12 7.0127NTCE110 3 1/2 => 110 mm 3 1/2 => 110 mm 0.39 5.47 3.27 3.48 6.16 5.67 6.97 9.7227NTCE160 6 => 160 mm 6 => 160 mm 0.57 7.48 3.42 4.13 7.93 5.94 8.19 11.93

D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncol\NB10078.dwg


DESC:


DRAWING No:

SHEET OF REV.NCOL

BRANCH SADDLE WITH RIGID UNDER CLAMPCOLLARE DI PRESA A TRONCHETTO CON FONDO STAFFA RIGIDO SDR11

NB10078

1 2 -1

CODE Dn1 Dn2 S min L1 L H Max Hole27NCOL4025 40 25 3,0 70 100 82 1627NCOL5025 50 25 3,0 70 100 82 1627NCOL6325 63 25 3,0 70 100 82 1627NCOL7525 75 25 3,0 70 100 82 1627NCOL9025 90 25 3,0 70 106 98 1827NCOL4032 40 32 3,0 70 100 82 22,527NCOL5032 50 32 3,0 70 100 82 22,527NCOL6332 63 32 3,0 70 100 82 22,527NCOL7532 75 32 3,0 70 100 82 22,527NCOL9032 90 32 3,0 75 106 98 2527NCOL11032 110 32 3,0 72,5 100 97 22,527NCOL6340 63 40 3,7 70 100 82 3027NCOL7540 75 40 3,7 70 100 82 3027NCOL6350 63 50 4,6 75 132 110 3727NCOL9063 90 63 5,8 82 140 100 4427NCOL11063 110 63 5,8 82 140 100 4427NCOL12563 125 63 5,8 82 140 100 44

S minDn2

L1 H

Dn1

Max Hole

L


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncolpr\NI10347.dwg


DESC:


DRAWING No:

SHEET OF REV.NCOLPR ELECTROLET BRANCH FITTING WITH

PEX ADAPTER - WITH BELT NI10347

1 2 0

CODE ND Thread L Thread CH LCH L H Max Hole27NCOLF125114F 5"=> 125mm 1"1/4 NPT 0.68 1.81 0.47 5.55 2 1.1827NCOLF160114F 6"=> 160mm 1"1/4 NPT 0.68 1.81 0.47 5.55 2 1.18

CODE ND1 C LC L H Max Hole27NCOLPR90112 3" => 90 mm 1"1/2 1.70 5.51 5.60 1.1827NCOLPR9002 3" => 90 mm 2" 2.13 5.51 6.11 1.5027NCOLPR11012 4"=> 110 mm 1/2" 0.73 5.51 4.11 0.6327NCOLPR11034 4"=> 110 mm 3/4" 0.96 5.51 4.54 0.6327NCOLPR110112 4" => 110 mm 1"1/2 1.70 5.51 5.60 1.1827NCOLPR11002 4" => 110 mm 2" 2.13 5.51 6.11 1.5027NCOLPR12534 5" => 125 mm 3/4" 0.96 5.51 4.11 0.6327NCOLPR12501 5" => 125 mm 1" 1.20 5.51 5.02 0.8927NCOLPR125114 5" => 125 mm 1"1/4" 1.44 5.51 5.26 0.8927NCOLPR125112 5" => 125 mm 1"1/2 1.70 5.51 5.60 1.1827NCOLPR12502 5" => 125 mm 2" 2.13 5.51 6.11 1.5027NCOLPR16034 6"=> 160 mm 3/4" 0.96 5.51 4.11 0.6327NCOLPR16001 6"=> 160 mm 1" 1.20 5.51 5.02 0.8927NCOLPR160114 6"=> 160 mm 1"1/4" 1.44 5.51 5.26 0.8927NCOLPR160112 6"=> 160 mm 1"1/2 1.70 5.51 5.60 1.1827NCOLPR16002 6"=> 160 mm 2" 2.13 5.51 6.11 1.50

ND1

H

Max Hole

L

TYPE B

LC

C


ITEM:

C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Electrofusion Fittings\NI10239.dwg


DESC:


DRAWING No:

SHEET OF REV.NCOLF_F BRANCH SADDLE WITH FEMALE

THREADED OUTLET - WITH BELT NI10239

1 5 -1

CODE ND Thread L Thread CH LCH L H Max Hole27NCOLF125114F 5"=> 125mm 1"1/4 NPT 0.68 1.81 0.47 5.55 2 1.1827NCOLF160114F 6"=> 160mm 1"1/4 NPT 0.68 1.81 0.47 5.55 2 1.18

CODE ND Thread L Thread CH LCH L H Max Hole27NCOLF110F12 (A) 4"=> 110 mm 1/2" NPT 0.53 - - 5.51 3.38 0.6327NCOLF125F12 (A) 5"=> 125 mm 1/2" NPT 0.53 - - 5.51 3.38 0.6327NCOLF160F12 (A) 6"=> 160 mm 1/2" NPT 0.53 - - 5.51 3.38 0.6327NCOLF110F34 (A) 4"=> 110 mm 3/4" NPT 0.55 - - 5.51 3.58 0.6327NCOLF125F34 (A) 5"=> 125 mm 3/4" NPT 0.55 - - 5.51 3.58 0.6327NCOLF160F34 (A) 6"=> 160 mm 3/4" NPT 0.55 - - 5.51 3.58 0.6327NCOLF200F34 (A) 8"=> 200 mm 3/4" NPT 0.55 - - 5.51 3.80 0.8927NCOLF250F34 (A) 10"=> 200 mm 3/4" NPT 0.55 - - 5.51 3.80 0.8927NCOLF315F34 (A) 12"=> 200 mm 3/4" NPT 0.55 - - 5.51 3.80 0.8927NCOLF125F01 (A) 5"=> 125 mm 1" NPT 0.66 - - 5.51 3.82 0.8927NCOLF160F01 (A) 6"=> 160 mm 1" NPT 0.66 - - 5.51 3.82 0.8927NCOLF200F01 (A) 8"=> 200 mm 1" NPT 0.66 - - 5.51 3.82 0.8927NCOLF250F01 (A) 10"=> 250 mm 1" NPT 0.66 - - 5.51 3.82 0.8927NCOLF315F01 (A) 12"=> 315 mm 1" NPT 0.66 - - 5.51 3.82 0.89

ND

Thread

H

Max Hole

L Th

read

LTYPE A


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncolf_m\NI10348.dwg


DESC:


DRAWING No:

SHEET OF REV.NCOLF_M MALE THREADED TRANSITION BRANCH

SADDLE WITH RIGID UNDER CLAMP NI10348

1 3 0

CODE ND1 Thread LThread CH LCH L H Max

Hole27NCOLF40M12 (A) 1" 1/4 => 40 mm 1/2" NPT 0.53 - - 3.94 3.07 0.6327NCOLF50M12 (A) 1" 1/2 => 50 mm 1/2" NPT 0.53 - - 3.94 3.07 0.6327NCOLF63M12 (A) 2" => 63 mm 1/2" NPT 0.53 - - 3.94 3.07 0.6327NCOLF75M12 (A) 2" 1/2 => 75 mm 1/2" NPT 0.53 - - 3.94 3.07 0.6327NCOLF90M12 (A) 3" => 90 mm 1/2" NPT 0.53 - - 4.17 3.70 0.5927NCOLF40M34 (A) 1" 1/4 => 40 mm 3/4" NPT 0.55 - - 3.94 3.30 0.6327NCOLF50M34 (A) 1" 1/2 => 50 mm 3/4" NPT 0.55 - - 3.94 3.30 0.6327NCOLF63M34 (A) 2" => 63 mm 3/4" NPT 0.55 - - 3.94 3.30 0.6327NCOLF75M34 (A) 2" 1/2 => 75 mm 3/4" NPT 0.55 - - 3.94 3.30 0.6327NCOLF90M34 (A) 3" => 90 mm 3/4" NPT 0.55 - - 4.17 3.93 0.5927NCOLF40M01 (A) 1" 1/4 => 40 mm 1" NPT 0.68 - - 3.94 3.66 0.8927NCOLF50M01 (A) 1" 1/2 => 50 mm 1" NPT 0.68 - - 3.94 3.66 0.8927NCOLF63M01 (A) 2" => 63 mm 1" NPT 0.68 - - 3.94 3.66 0.8927NCOLF75M01 (A) 2" 1/2 => 75 mm 1" NPT 0.68 - - 3.94 3.66 0.8927NCOLF90M01 (A) 3" => 90 mm 1" NPT 0.68 - - 3.94 3.66 0.9827NCOLF110M01 (A) 4" => 110 mm 1" NPT 0.68 - - 3.94 3.66 0.89

TYPE A

ND1

Max Hole

H

Thread L

L Th

read

TM

All-Pro

Cool-proTM

Nupi Americas, Inc.

314 Commerce ParkwayEarly Branch - SC 29916 - U.S.A.ph. +1 803-398-3579fax: +1 803 398 3639

1511 Superior Way,Houston - TX 77039 - U.S.A.ph. +1 281 590 4471fax +1 281 590 5268

[email protected]

www.nupiamericas.com

pp-rct piping systems - nupi americas

Documents