pp-rct piping systems - nupi americas · pdf fileassistance and intensive training of...

APPROVED F

OR POTA

BLE W

ATER

PP-RCTPiping Systems

THE

COM

PAN

Y

BUSTO ARSIZIO - VA (IT)

SHANGHAI (RPC)

HOUSTON-TX (USA)

SOUTH CAROLINA-SC (USA)

CASTEL GUELFO - BO (IT)

BRISBANE-QLD (AUS)

REGISTERED OFFICESHANGHAI GECO SYSTEM CO.

NUPI AMERICAS INC.

NUPI AMERICAS INC.

PRODUCTION &OPERATIONS CENTRE

NUPI SALES OFFICE

NUPI AMERICAS Inc. was founded in 2001 and is based in Houston, TX where it

established a warehouse and production facility. Another warehouse is located

in Early Branch, SC.

NUPI AMERICAS has its roots in NUPI Industrie Italiane S.p.A., born in

2015 to replace NUPIGECO S.p.A. that was founded in 2008 by the merger

of NUPI S.p.A. and GECO System S.p.A. – two companies with more than 40

years of experience in the field.

NUPI Industrie Italiane S.p.A. and NUPI AMERICAS together develop and

manufacture piping systems for use in industrial, sanitary (plumbing), HVAC,

chemical and petrochemical applications, waterworks, gas and irrigation markets.

Relying on experience and constant growth, our companies have proven to be

cutting edge manufacturers, ready to meet the needs of the market while also

protecting the environment.

Our trademarked systems are real system solutions, covering a wide range

of applications, reducing costs, avoiding waste and increasing productivity.

Thanks to their quality, these products have passed many different tests and

have obtained the most prestigious certificates and listings, in line with the

regulations of the five continents for the construction of water and gas

networks and systems for the transport of fuels.

Producing better quality and being cost effective is the goal, which is made

easier everyday by new technology. Our companies are continuously investing

in research and development programs, while strengthening our production

systems, operated by a sophisticated technology that guarantees the highest

quality of products.

Our facilities use modern, state-of-the-art computer controlled production

equipment and methods that guarantee products of the highest quality together

with continuous quality control systems.

On these solid foundations NUPI Industrie Italiane S.p.A. and NUPI AMERICAS

demonstrate leadership throughout the thermoplastic piping industry. Our

customers can rely on the best quality materials and precise manufacture,

obtained through completely automated production systems resulting in timely

deliveries.

Customer satisfaction is pursued through high quality products and the

constant attention to our customers’ needs and requirements and by means of

an effective team of people in post-sales service, effective and precise technical

assistance and intensive training of installers.

SHANGHAI (RPC)

SHANGHAI GECO SYSTEM CO.

The NIRON brand identifies a Random Copolymer Polypropylene (PP-RCT) pipe and fitting system produced by Nupi Americas, manufactured to ASTM F2389 and CSA B137.11 standards.

NIRON is a piping system used for all kinds of water applications including hot and cold potable water applications, hydronic heating applications, and both chilled water and cooling tower circulation pipes. The system can be used for large multi-family residential buildings, hotels, hospitals, malls, churches, schools, gymnasiums, cruise liners and merchant ships. The NIRON system is also used in industrial installations for the conveyance of compressed air and several commonly used chemical substances.

ADVANCED PP-RCT MATERIAL NIRON is manufactured from 100% Beta PP-RCT material, a highly crystalline form of PPR which allows for up to twice the pressure rating at higher temperatures and superior chlorine resistance.

ABSOLUTE RELIABILITY Produced since 1982, the NIRON system has been sold in all 5 continents. Over 150,000 miles of pipes and fittings have been shipped with complete customer and installer satisfaction.

CERTIFIED QUALITY The NIRON system obtained the most prestigious international

quality certificates but to us quality stands for complete customer satisfaction. This is obtained exclusively through the supply of products having features that completely fulfil the application requirements.

COMPLETE RANGE NIRON pipes and fittings - from 1/2 to 24 inches - are available

in a wide range of fittings and joining methods to solve any installation problem.

LOW THERMAL EXPANSION

This is obtained thanks to the new composite piping NIRON FG and NIRON CLIMA produced with an innovative coextrusion technology.

Their inner layer is made of PP copolymer reinforced with fiberglass to reduce the linear thermal expansion up to 73%.

SPEED OF INSTALLATIONUnquestionably the biggest advantage of NIRON lies in the speed of installation.

Due to easy joining methods, time of installation can be reduced by 30 to 50%.

THE PRODUCT

* NIRON, grey pigmented PP piping with red outer coating and longitudinal grey stripes, and grey pigmented PP piping with blue outer coating and longitudinal grey stripes are trademarks of Nupi Americas Inc., a subsidiary of Nupi Industrie Italiane S.p.A.

NO CORROSION OR SCALING Polypropylene is a poor conductor of electricity, so the

NIRON system is cannot be affected by corrosion. Furthermore, thanks to its smooth inner surface, any type of lime incrustation is avoided.

ENERGY SAVING The low thermal conductivity of polypropylene

allows for considerable energy savings compared to metallic materials, and reduces insulation cost.

LOW NOISE INSTALLATION The noise absorption properties and elasticity of

this material soften noise and vibrations caused by the water flow and the water hammer effect.

RESISTANCE TO EXTREME TEMPERATURES AND THERMAL EXPANSION

The NIRON system is tested to resist temperatures up to boiling water and freezing conditions. NIRON FG piping allows thermal expansion to be reduced to levels similar to copper piping.

ABRASION RESISTANCE The high resistance of NIRON pipes eliminates erosion problems and allows high speed water flow.

NO TOXICITY The NIRON system is absolutely non-toxic and complies with national and international health

standards.

30 YEAR WARRANTY The NIRON system is covered by third party liability insurance in accordance to EC standards

no. 85/374 and to D.P.R no. 244 dated 24th May 1988 - Italian law.

THE PRODUCT

WIDE RANGE OF JOINING METHODSNIRON offers the widest range of joining options of any PPR product line with five primary joining methods and a complete range of fitting sizes. NIRON can be joined by butt fusion and electrofusion through 24 inch.

SOCKET FUSIONNIRON offers socket fusion for full pressure joining with a full range of fittings in ½ inch through 5 inch sizes. Joints can be made using hand held tools, and in large sizes with bench-style tools for maximum effectiveness.

BUTT FUSIONNIRON offers butt fusion with long spigot fittings starting at 2 inch and through 24 inch. Butt fusion is often a more fabrication friendly technique compared to socket fusion in sizes of 2 inch through 5 inch, and customers can take advantage of this feature of the NIRON system.

ELECTROFUSIONElectrofusion offers a superior and cost effective ability to solve difficult installation challenges. NIRON is the only PPR system available with a full fitting system allowing electrofusion in sizes of ½ through 8 inch. NIRON fittings are manufactured using single wire technology, which means welds are fused simultaneously for every elbow, tee and reducer for highly efficient labor rates. NIRON electrofusion may be performed from 10” through 24” using NIRON couplings.

COMPRESSION NIRON can be joined using a compression method, by the hand tightening of compression nuts of fittings and couplings. A full range of fittings are available in sizes of ½” through 4”. The system is rated to 150 psi at ambient temperatures, and is rated to 90 psi for temperatures of up to 160oF in sizes through 2 inch and to 90 psi for temperature of up to 140oF in sizes of 2½” through 4 inch. NIRON compression fittings and couplings may be disassembled and re-used, which adds versatility. Transition couplings are also available for connection to copper and copper-tube size systems.

SADDLE WELDINGNIRON offers a full variety of saddle fusion fittings that allow small diameter branches to be made into larger pipes without the expense of adding reducing tees. NIRON has saddles available which allow both socket fusion outlets, as well as long spigot outlets (in select sizes). In addition, saddle parts are available with female threaded adapters, as well as male transition parts to allow for a variety of PEX transitions. Custom headers can be created on site, or in the fabrication shop to prefabricate any kind of header combination that is required. Saddle welding offers substantial labor savings in comparison to installations involving copper piping.

NIRON PIPING SYSTEM

NIRON BLUE PP-RCT PIPE

MONOLAYER PP-RCT PIPEBLUE WITH GREY STRIPESFOR COLD WATERSDR 7.3 FROM ½” TO ¾” SDR 9 1” SDR 11 FROM 1¼” TO 6”SDR 17 FROM 2” TO 6”PIPE LENGTH 20 FT

NIRON FG RED PP-RCT PIPE

MULTILAYER PIPEPP-RCT + FIBERGLASSRED WITH GREY STRIPESFOR HOT WATERSDR 7.3 FROM ½” TO 6” SDR 9 FROM 1” TO 6” SDR 11 FROM 1¼” TO 6”PIPE LENGTH 20 FT

NIRON CLIMA PP-RCT PIPE

MULTILAYER CLIMA PIPEPP-RCT + FIBERGLASSGREYSDR 7.3 FROM ½” TO 14” SDR 9 FROM 1” TO 6”SDR 11 FROM 1¼” TO 16”SDR 17 FROM 2” TO 24”PIPE LENGTH 20 FT

NIRON MONO GREY PP-RCT PIPE

MONOLAYER PP-RCT PIPEGREYSDR 7.3 FROM ½” TO ¾”SDR 9 1” SDR 11 FROM 1¼” TO 24”SDR 17 FROM 2” TO 24”PIPE LENGTH 20 FT

NIRON CLIMA 11 DARK

MULTILAYER CLIMA11 DARK PIPE WITH UV RAY BARRIERPP-RCT+FIBERGLASS+HDPE COVERGREY AND BLACK COVERSDR 11 FROM 1” TO 16”SDR 17 FROM 2” TO 16”PIPE LENGTH 20 FT

FITTINGS

LONG RADIUS 90° ELBOWCODE inchesNCLR ½” - ¾”

CROSSOVER PIPECODE inchesNSOR ½” - ¾” - 1”NSOFF ½” - ¾”NSOFM ½” - ¾”

90° ELBOWCODE inchesNG (SOCKET FUSION) from ½” to 5”NG_MM (LONG SPIGOT) from 2” to 24”

FEMALE THREADED 90° ELBOWCODE inchesNGF from ½” x ½”NPT to 2” x 2” NPT

MALE THREADED 90° ELBOWCODE inchesNGM from ½” x ½” NPT

to 1” x 1” NPT

FEMALE THREADED BACK PLATE 90° CODE inchesNTER ½” x ½” NPT

FEMALE THREADED WINGED 90° ELBOWCODE inches

NGTF ½” x ⅜” NPT ½” x ½” NPT

MALE THREADED WINGED 90° ELBOWCODE inches

NGTM ½” x ⅜” NPT ½” x ½” NPT

MOUNTING UNIT WITH 90° ELBOWSCODE inches NGVRF ½” x ½” NPT

TEMPLATE FOR EXTERNAL BATH TAPSCODE inches NGVF ½” x ½” NPT

¾” x ½” NPT

FEMALE THREADED 90° ELBOW FOR TEMPLATECODE inches

NGOF ½” x ⅜” NPT ¾” x ½” NPT

MALE THREADED 90° ELBOW FOR TEMPLATECODE inchesNGOM ½” x ½” NPT

STREET 90° ELBOWCODE inchesNGMF from ½” to 1¼”

FEMALE THREADED STREET 90° ELBOWCODE inchesNGMFF ½” x ½” NPT

45° ELBOWCODE inchesNC45 (SOCKET FUSION)

from ½” to 5”NC45_MM (LONG SPIGOT)

from 2” to 24”

STREET 45° ELBOWCODE inchesNC45MF from ½” to 1”

90° TEECODE inchesNT (SOCKET FUSION)

from ½” to 5”NT_MM (LONG SPIGOT)

from 2” to 24”

FEMALE THREADED TEE W/NPT LEAD FREE BRASSCODE inchesNTF from ½” x ½” NPT

to 1” x 1” NPT

FEMALE THREADED TEE W/NPT STAINLESS STEELCODE inchesNTF_SS from ½” x ½” NPT

to 1” x 1” NPT

MALE THREADED TEE W/NPT LEAD FREE BRASSCODE inchesNTM from ½” x ½” NPT

to 1” x 1” NPT

MALE THREADED TEE W/NPT STAINLESS STEELCODE inchesNTM_SS from ½” x ½” NPT

to 1” x 1” NPT

REDUCING TEE - SOCKET FUSIONCODE inchesNTR from ¾” x ½”

to 5” x 4”

MALE BRANCH REDUCING TEE - LONG SPIGOTCODE inchesNTR_M from 6” x 2”

to 24” x 22”

SOCKET BRANCH FUSION REDUCING TEECODE inchesNTRF from 3” x 1¼”

to 14” x 3”

45° LATERAL WYE - LONG SPIGOTCODE inchesNWYE from 3” x 20”

REDUCED CROSS - SOCKET FUSIONCODE inchesNCR from 1¼” x ½” x ½” x 1¼” to 1¼” x ¾” x ¾” x 1¼”

SLIDE ELBOW THREE OUTLETS - SOCKET FUSIONCODE inchesNCTV ½”

REDUCING BUSHING - SOCKET FUSIONCODE inchesNR from ¾” x ½” to 5”x 4”

MALE CONCENTRIC REDUCER - LONG SPIGOTCODE inches SDR 11 - 17NR_MM (LONG SPIGOT) from 2½” x 1¼” to 8”x 6”NRCC (SHORT SPIGOT) from 10” x 6” to 24”x 22”

COUPLINGCODE inchesNMAN from ½” to 5”

www.nupiamericas.com - [email protected]

ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Tnirrfg_74 pollici - SDR74- Hot Water\NI10168.dwg

All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389

DESC:

All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice

DRAWING No:

SHEET OFREV.TNIRRFGNIRON MULTI RED FG PP-RCT PIPE

FOR HOT WATERNI10168

1 2 -1

CODESDRNDS minDiWeight (lbs/ft)27TNIRRFG20737.31/2" => 20 mm0.110.570.1127TNIRRFG25737.33/4" => 25 mm0.140.710.1627TNIRRFG32737.31" => 32 mm0.170.910.2627TNIRRFG40737.31" 1/4 => 40 mm0.221.140.4027TNIRRFG50737.31" 1/2 => 50 mm0.271.430.6127TNIRRFG63737.32" => 63 mm0.341.800.9727TNIRRFG75737.32" 1/2 => 75 mm0.412.141.3827TNIRRFG90737.33" => 90 mm0.482.571.9827TNIRRFG110737.34" => 110 mm0.593.142.9327TNIRRFG125737.35" => 125 mm0.673.573.7727TNIRRFG160737.36" => 160 mm0.864.576.1127TNIRRFG32991" => 32 mm0.140.980.2227TNIRRFG40991" 1/4 => 40 mm0.171.230.3427TNIRRFG50991" 1/2 => 50 mm0.221.530.5227TNIRRFG63992" => 63 mm0.281.930.8427TNIRRFG75992" 1/2 => 75 mm0.332.291.1727TNIRRFG90993" => 90 mm0.392.751.6827TNIRRFG110994" => 110 mm0.483.372.5027TNIRRFG125995" => 125 mm0.553.823.2327TNIRRFG160996" => 160 mm0.724.895.24

S min

ND Di


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nclr pollici\NI10121.dwg

All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned

DESC:


DRAWING No:

SHEET OF REV.NCLR LONG RADIUS 90° ELBOW - SOCKET

FUSION NI10121

1 1 0

ND D

L1

L

H

CODE ND D L1 L H27NCLR20 1/2 => 20 mm 1.10 0.63 2.17 2.1727NCLR25 3/4 => 25 mm 1.34 0.63 2.56 2.56


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ng pollici\NI10125.dwg


DESC:


DRAWING No:

SHEET OF REV.NG 90° ELBOW - SOCKET FUSION

NI10125

1 1 0

ND

D1D

H1

H

L1

L2L

CODE ND D1 D L1 L2 L H1 H27NG20 1/2 => 20 mm 0.65 1.14 0.63 1.06 1.64 1.06 1.6327NG25 3/4 => 25 mm 0.93 1.40 0.63 1.22 1.93 1.22 1.9327NG32 1 => 32 mm 1.18 1.81 0.79 1.46 2.36 1.46 2.3627NG40 1 1/4 => 40 mm 1.42 2.21 0.87 1.69 2.80 1.69 2.7927NG50 1 1/2 => 50 mm 1.81 2.76 0.98 2.01 3.39 2.01 3.3927NG63 2 => 63 mm 2.32 3.47 1.14 2.44 4.17 2.44 4.1727NG75 2 1/2 => 75 mm 2.76 3.98 1.30 2.87 4.86 2.87 4.8627NG90 3 => 90 mm 3.37 4.45 1.46 3.25 5.47 3.25 5.4727NG110 3 1/2 => 110 mm 3.94 5.75 1.69 3.94 6.81 3.94 6.8127NG125 4 => 125 mm 4.45 6.50 1.87 4.92 8.17 4.92 8.17


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngf_NPT pollici\NI10057.dwg


DESC:


DRAWING No:

SHEET OF REV.NGF_NPT FEMALE THREADED 90° ELBOWS -

NPT - LEAD FREE BRASS NI10057

1 1 -1

H1 H

L1

L2

L

D

LTh. min

Thre

ad

HH

1

LTh. min

L2L

Thre

ad

L1

D

HH

1

D

Thre

adC

H

LTh. min

L2

LCH

L1

ND ND ND

L

D1 D

1

D1

CODE ND D1 D Thread L Thread min L1 L2 L H1 H CH LCH27NGF2012NPT (B) 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.54 2.11 1.08 1.81 - -27NGF2512NPT (A) 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.67 1.54 2.22 1.20 1.93 - -27NGF2534NPT (A) 3/4 => 25 mm 0.73 1.65 3/4" NPT 0.55 0.67 1.54 2.22 1.20 2.03 - -27NGF3212NPT (B) 1 => 32 mm 0.55 1.65 1/2" NPT 0.53 0.71 1.81 2.64 1.42 2.24 - -27NGF3234NPT (B) 1 => 32 mm 0.73 1.65 3/4" NPT 0.55 0.71 1.81 2.64 1.42 2.24 - -27NGF321NPT (B) 1 => 32 mm 0.95 2.13 1" NPT 0.66 0.79 1.81 2.64 1.85 2.91 - -27NGF401NPT (B) 1 1/4 => 40 mm 0.95 2.24 1" NPT 0.66 0.79 2.05 3.11 1.69 2.84 - -27NGF50114NPT (C) 1 1/2 => 50 mm 1.30 2.76 1"1/4 NPT 0.68 0.98 2.60 3.98 2.01 3.39 1.81 0.5927NGF50112NPT (C) 1 1/2 => 50 mm 1.56 2.76 1"1/2 NPT 0.68 0.98 2.60 3.98 2.01 3.39 2.17 0.5927NGF63112NPT (C) 2 => 63 mm 1.56 3.47 1"1/2 NPT 0.68 1.14 3.03 4.76 2.44 4.17 2.17 0.5927NGF632NPT (C) 2 => 63 mm 1.97 3.47 2" NPT 0.70 1.14 3.23 4.96 2.44 4.17 2.55 0.79


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngm_NPT pollici\NI10058.dwg


DESC:


DRAWING No:

SHEET OF REV.NGM _NPT

MALE THREADED 90° ELBOWS - NPT - LEAD FREE BRASS NI10058

1 1 -1

LTh. minL2

L

ND

L1H

1H

DTh

read

D1

CODE Dn D1 D Thread L Thread min L1 L2 L H1 H27NGM2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 2.13 2.70 1.08 1.8127NGM2512NPT 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.67 2.13 2.82 1.20 1.9327NGM2534NPT 3/4 => 25 mm 0.73 1.65 3/4" NPT 0.55 0.67 2.13 2.89 1.20 2.0327NGM3212NPT 1 => 32 mm 0.55 1.65 1/2" NPT 0.53 0.71 2.40 3.23 1.42 2.2427NGM3234NPT 1 => 32 mm 0.73 1.65 3/4" NPT 0.55 0.71 2.40 3.31 1.42 2.2427NGM321NPT 1 => 32 mm 0.95 2.13 1" NPT 0.68 0.79 2.56 3.41 1.85 2.91


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngtf_NPT pollici\NI10127.dwg


DESC:


DRAWING No:

SHEET OF REV.NGTF_NPT

FEMALE THREADED WINGED 90°-NPT - LEAD FREE BRASS NI10127

1 1 0

D1

Thre

adD

LTh. minL2

ND

L1

L3L4

H1

H

D2

CODE ND D1 D2 D Thread L Thread min L1 L2 L3 L4 L H1 H27NGTF2038NPT 1/2 => 20 mm 0.43 0.12 1.46 3/8" NPT 0.41 0.63 1.54 2.60 2.95 2.11 1.08 1.8127NGTF2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 1.54 2.60 2.95 2.11 1.08 1.81

L


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngtm_NPT pollici\NI10128.dwg


DESC:


DRAWING No:

SHEET OF REV.NGTM_NPT

MALE THREADED WINGED 90° - NPT - LEAD FREE BRASS NI10128

1 1 0

D1

Thre

adD

LTh. minL2

ND

L1

L3L4

H1

H

L

D2

CODE ND D1 D2 D Thread LThread min L1 L2 L3 L4 L H1 H27NGTM2038NPT 1/2 => 20 mm 0.43 0.12 1.46 3/8" NPT 0.41 0.63 1.97 2.60 2.95 2.54 1.08 1.8127NGTM2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 2.13 2.60 2.95 2.70 1.08 1.81


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngvrf_NPT pollici\NI10129.dwg


DESC:


DRAWING No:

SHEET OF REV.NGVRF_NPT

MOUNTING UNIT WITH ELBOWS 1/2" x 1/2" NPT NI10129

1 1 0

L3

L1 L2L

H1

H

L4D1

H3

H2

CODE L1 L2 L3 L4 L H1 H2 H3 H D127NGVRF2012NPT 3.05 10.04 5.91 1.58 16.14 1.18 1.81 0.59 2.21 0.20


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngvf_NPT pollici\NI10130.dwg


DESC:


DRAWING No:

SHEET OF REV.NGVF_NPT

TEMPLATE FOR EXTERNAL BATH TAPS1/2" x 1/2" NPT3/4" x 1/2" NPT

NI10130

1 1 0

A

B

C A

B

CAA

L2L1

D1

L

H1

H

CODE L1 L2 L H1 H D1 A-A B-A B-B C-C27NGVF2012NPT 1.97 0.59 13.94 1.99 2.19 0.16 5.91 6.30 6.69 7.0927NGVF2512NPT 1.97 0.59 13.94 2.21 2.19 0.16 5.91 6.30 6.69 7.09


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngof_NPTpollici\NI10131.dwg


DESC:


DRAWING No:

SHEET OF REV.NGOF_NPT

FEMALE THREADED 90° ELBOW FOR TEMPLATE - NPT - LEAD FREE BRASS NI10131

1 1 0

D1

Thre

adD

L1

NDLTh. minL2

L

H1

H

CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGOF2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.18 2.15 1.12 1.9127NGOF2512NPT 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.18 2.15 1.34 2.13


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nter_NPT pollici\NI10126.dwg


DESC:


DRAWING No:

SHEET OF REV.NTER_NPT

FEMALE THREADED BACK PLATE 90° ELBOW - NPT - LEAD FREE BRASS NI10126

1 1 0

D

LTh. minL2

ND

L

L1

H1

H

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H2 H27NTER2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 1.54 2.11 1.08 2.24 2.50

Thre

adD

1

D2

H2


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngom_NPT pollici\NI10132.dwg


DESC:


DRAWING No:

SHEET OF REV.NGOM_NPT

MALE THREADED 90° ELBOW FOR TEMPLATE - NPT - LEAD FREE BRASS NI10132

1 1 0

D1

Thre

adD

LTh. min NDL2

L

L1H

1H

CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGOM2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.77 2.74 1.12 1.91


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngmff_NPT pollici\NI10135.dwg


DESC:


DRAWING No:

SHEET OF REV.NGMFF_NPT

FEMALE THREADED STREET 90° ELBOW - NPT - LEAD FREE BRASS NI10135

1 1 0

NDL2

L

Thre

ad

LTh. min

H1

H

L1

D

D1

CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGMFF2012NPT 1/2 => 20 mm 0.52 1.14 1/2" NPT 0.53 0.63 1.22 1.77 1.46 2.17


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nc45 pollici\NI10136.dwg


DESC:


DRAWING No:

SHEET OF REV.NC45 45° ELBOW - SOCKET FUSION

NI10136

1 1 0

NDD1

D

L1

H

L

CODE ND D1 D L1 L H1 H27NC4520 1/2 => 20 mm 0.65 1.14 0.63 1.30 0.85 1.8127NC4525 3/4 => 25 mm 0.93 1.34 0.63 1.81 0.97 2.1127NC4532 1 => 32 mm 1.18 1.65 0.79 2.21 1.14 2.5227NC4540 1 1/4 => 40 mm 1.42 2.09 0.87 2.64 1.26 2.8527NC4550 1 1/2 => 50 mm 1.87 2.60 0.98 3.29 1.56 3.5427NC4563 2 => 63 mm 2.36 3.27 1.14 4.02 1.77 4.1327NC4575 2 1/2 => 75 mm 2.76 3.90 1.30 5.10 2.56 5.7127NC4590 3 => 90 mm 3.39 4.86 1.46 5.71 2.24 5.5127NC45110 3 1/2 => 110 mm 3.94 5.75 1.69 6.79 2.76 6.6727NC45125 4 => 125 mm 4.45 6.50 1.87 7.64 3.07 7.46

H1

www.nupiindustrieitaliane.com - [email protected]

ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nc45mf\NB10075.dwg

All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14

DESC:


DRAWING No:

SHEET OF REV.NC45MF CURVA 45° MASCHIO/FEMMINA

STREET 45° ELBOW - SOCKET FUSION NB10075

1 1 0

L2

L1 H1

Dn2

Dn1

D

D1

CODE Dn1 Dn2 D1 D L1 L2 H127NC45MF20 20 20 13 30,5 14,5 15 19,527NC45MF25 25 25 16,5 34,5 16 16 2227NC45MF32 32 32 21 43 20 17 26


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nt pollici\NI10138.dwg


DESC:


DRAWING No:

SHEET OF REV.NT TEE - SOCKET FUSION

NI10138

1 1 0

HH

1

LL2

L1

D1NDD

CODE ND D1 D L1 L2 L H1 H27NT20 1/2 => 20 mm 0.71 1.30 0.63 1.06 2.13 1.06 1.7127NT25 3/4 => 25 mm 0.83 1.38 0.67 1.24 2.48 1.24 1.9327NT32 1 => 32 mm 1.18 1.81 0.79 1.46 2.91 1.46 2.3627NT40 1 1/4 => 40 mm 1.42 2.21 0.87 1.69 3.39 1.69 2.8027NT50 1 1/2 => 50 mm 1.81 2.76 0.98 2.01 4.02 2.01 3.3927NT63 2 => 63 mm 2.32 3.47 1.14 2.44 4.88 2.44 4.1727NT75 2 1/2 => 75 mm 2.76 3.98 1.30 2.87 5.75 2.87 4.8627NT90 3 => 90 mm 3.47 4.45 1.46 3.31 6.61 3.31 5.5327NT110 3 1/2 => 110 mm 3.94 5.75 1.69 3.94 7.87 3.94 6.8127NT125 4 => 125 mm 4.45 6.50 1.87 4.92 9.84 4.92 8.17


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntf_ss NPT pollici\NI10192.dwg


DESC:


DRAWING No:

SHEET OF REV.NTF_SSNPT

FEMALE THREADED TEE - STAINLESS STEEL - NPT NI10192

1 1 0

H

H1

NDD

L1

L2L

LTh.

min

Thread

H1

H

LL2

L1

Thread

NDD

LTh.

min

TYPE A TYPE B

D2

D1 D1

D2

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTF2012SSNPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 1.54 2.1127NTF2512SSNPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 1.54 2.2227NTF2534SSNPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 1.54 2.2227NTF3212SSNPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 1.61 2.4427NTF3234SSNPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 1.61 2.4427NTF321SSNPT (B) 1 => 32 mm 0.95 2.13 2.13 1" NPT 0.66 0.79 1.85 3.74 1.54 2.60


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntm_NPT pollici\NI10059.dwg


DESC:


DRAWING No:

SHEET OF REV.NTM_NPT

MALE THREADED TEE - NPT - LEAD FREE BRASS NI10059

1 1 -1

L1

NDD

H1 H

D1Thread

D2

LL2

LTh.

min

L1

HH

1

NDD

D1Thread

D2L2

L

TYPE A TYPE B

LTh.

min

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTM2012NPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 2.13 2.7027NTM2512NPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 2.13 2.8227NTM2534NPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 2.21 2.8927NTM3212NPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 2.21 3.0327NTM3234NPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 2.28 3.1027NTM321NPT (B) 1 => 32 mm 0.95 2.13 1.65 1" NPT 0.68 0.79 1.87 3.74 2.50 3.35


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntm_ss NPT pollici\NI10193.dwg


DESC:


DRAWING No:

SHEET OF REV.NTM_SSNPT

MALE THREADED TEE - STAINLESS STEEL - NPT NI10193

1 1 0

L1

NDD

H1 H

D1Thread

D2

LL2

LTh.

min

L1

HH

1

NDD

D1Thread

D2L2

L

TYPE A TYPE B

LTh.

min

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTM2012SSNPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 2.13 2.7027NTM2512SSNPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 2.13 2.8227NTM2534SSNPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 2.21 2.8927NTM3212SSNPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 2.21 3.0327NTM3234SSNPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 2.28 3.1027NTM321SSNPT (B) 1 => 32 mm 0.95 2.13 1.65 1" NPT 0.68 0.79 1.87 3.74 2.50 3.35


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntr pollici\NI10139.dwg


DESC:


DRAWING No:

SHEET OF REV.NTR REDUCED TEE SOCKET FUSION

NI10139

1 5 0

CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H27NTR252025 3/4=> 25 mm 1/2=> 20 mm 3/4=> 25 mm 0.83 0.65 0.83 1.14 1.38 0.67 0.63 0.67 2.44 1.18 1.8727NTR253225 3/4=> 25 mm 1=> 32 mm 3/4=> 25 mm 0.83 0.83 0.83 1.81 1.81 0.67 0.79 0.67 2.91 1.49 2.4027NTR322032 1=> 32 mm 1/2=> 20 mm 1=> 32 mm 1.18 0.65 1.18 1.14 1.81 0.79 0.63 0.79 2.95 1.38 2.2827NTR322532 1=> 32 mm 3/4=> 25 mm 1=> 32 mm 1.18 0.83 1.18 1.38 1.81 0.79 0.67 0.79 2.95 1.38 2.2827NTR402040 1 1/4=>40 mm 1/2=> 20 mm 1 1/4=>40 mm 1.42 0.65 1.42 1.30 2.09 0.95 0.63 0.95 2.91 1.54 2.6027NTR402540 1 1/4=>40 mm 3/4=> 25 mm 1 1/4=>40 mm 1.42 0.83 1.42 1.30 2.09 0.95 0.79 0.95 2.91 1.54 2.6027NTR403240 1 1/4=>40 mm 1=> 32 mm 1 1/4=>40 mm 1.38 1.18 1.38 2.13 2.13 0.87 0.79 0.87 3.43 1.69 2.7627NTR502050 1 1/2=>50 mm 1/2=> 20 mm 1 1/2=>50 mm 1.85 0.65 1.85 1.69 2.60 1.02 0.63 1.02 3.43 1.85 3.1527NTR502550 1 1/2=>50 mm 3/4=> 25 mm 1 1/2=>50 mm 1.85 0.83 1.85 1.69 2.60 1.02 0.79 1.02 3.43 1.85 3.1527NTR503250 1 1/2=>50 mm 1=> 32 mm 1 1/2=>50 mm 1.85 1.18 1.85 1.69 2.60 1.02 0.79 1.02 3.43 1.85 3.1527NTR504050 1 1/2=>50 mm 1 1/4=>40 mm 1 1/2=>50 mm 1.69 1.42 1.69 2.60 2.60 0.91 0.87 0.91 4.02 1.97 3.2727NTR632563 2 => 63 mm 3/4=> 25 mm 2 => 63 mm 2.36 0.83 2.36 2.09 3.27 1.18 0.83 1.18 4.02 2.13 3.7827NTR633263 2 => 63 mm 1=> 32 mm 2 => 63 mm 2.36 1.18 2.36 2.09 3.27 1.18 0.83 1.18 4.02 2.13 3.7827NTR634063 2 => 63 mm 1 1/4=>40 mm 2 => 63 mm 2.36 1.42 2.36 2.09 3.27 1.18 0.91 1.18 4.02 2.13 3.7827NTR635063 2 => 63 mm 1 1/2=>50 mm 2 => 63 mm 1.97 1.81 1.97 3.15 3.15 0.98 1.02 0.98 4.80 2.52 4.09

H

D4L

L1 L3

ND

1

L2

H1N

D3D

ND2D2

D1

D3


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntr_11_F pollici - SDR 11\NI10224.dwg


DESC:


DRAWING No:

SHEET OF REV.NTR11_F

FEMALE SIDE FUSION REDUCER TEESDR 11 NI10224

1 3 -0

CODE ND1 ND2 S1 D L1 L2 L H1 H27NTR119040F90 3 => 90 mm 1 1/4 => 40 mm 0.32 2.48 2.95 0.87 8.98 3.66 5.4327NTR119050F90 3 => 90 mm 1 1/2 => 50 mm 0.32 2.76 2.95 0.98 9.26 3.86 5.6327NTR119063F90 3 => 90 mm 2 => 63 mm 0.32 3.54 2.95 1.14 10.04 4.17 5.9427NTR1111040F110 3 1/2 => 110 mm 1 1/4 => 40 mm 0.39 2.48 3.05 0.87 9.17 4.05 6.2227NTR1111050F110 3 1/2 => 110 mm 1 1/2 => 50 mm 0.39 2.76 3.05 0.98 9.45 4.25 6.4227NTR1111063F110 3 1/2 => 110 mm 2 => 63 mm 0.39 3.54 3.05 1.14 10.23 4.56 6.7327NTR1112540F125 4 => 125 mm 1 1/4 => 40 mm 0.45 2.48 3.35 0.87 9.76 4.35 6.8127NTR1112550F125 4 => 125 mm 1 1/2 => 50 mm 0.45 2.76 3.35 0.98 10.04 4.55 7.0127NTR1112563F125 4 => 125 mm 2 => 63 mm 0.45 3.54 3.35 1.14 10.82 4.86 7.3227NTR1112575F125 4 => 125 mm 2 1/2 => 75 mm 0.45 4.33 3.35 1.30 11.61 4.51 6.9727NTR1112590F125 4 => 125 mm 3 => 90 mm 0.45 4.88 3.35 1.46 12.16 4.31 6.7727NTR1116040F160 6 => 160 mm 1 1/4 => 40 mm 0.58 2.48 3.44 0.87 9.96 5.04 8.19

ND2D

L1

L2

L

H

H1

S1

ND

1


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncr pollici\NI10140.dwg


DESC:


DRAWING No:

SHEET OF REV.NCR REDUCED CROSS

NI10140

1 1 0

ND

2D

3

ND1D

D2

L2

L3L

L1H

1H

D1

CODE ND1 ND2 D1 D2 D3 D L1 L2 L3 L H1 H27NCR402020 1 1/4 => 40 mm 1/2 => 20 mm 1.42 0.65 1.30 2.09 0.87 0.63 1.46 2.91 1.58 3.1527NCR402525 1 1/4 => 40 mm 3/4 => 25 mm 1.42 0.93 1.30 2.09 0.87 0.63 1.49 2.91 1.58 3.15


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nr pollici\NI10142.dwg


DESC:


DRAWING No:

SHEET OF REV.NR REDUCING SOCKET FUSION

BUSHINGS NI10142

1 3 0

L

D

S1

L2L1

ND

2

ND

1

CODE ND1 S1 ND2 D1 D L1 L2 L27NR2520 3/4 => 25 mm 0.17 1/2 => 20 mm - 1.14 0.75 0.63 1.6127NR3225 1 => 32 mm 0.21 3/4 => 25 mm - 1.38 0.87 0.67 1.7327NR4032 1 1/4 => 40 mm 0.26 1 => 32 mm - 1.81 0.98 0.79 1.9727NR5040 1 1/2 => 50 mm 0.33 1 1/4 => 40 mm - 2.21 1.10 0.87 2.1727NR6350 2 => 63 mm 0.41 1 1/2 => 50 mm - 2.76 1.26 0.98 2.1327NR7563 2 1/2 => 75 mm 0.49 2 => 63 mm - 3.27 1.42 1.14 2.9127NR9075 3 => 90 mm 0.59 2 1/2 => 75 mm - 3.78 1.46 1.34 3.1527NR11090 3 1/2 => 110 mm 0.72 3 => 90 mm - 4.51 1.46 1.46 3.0327NR125110 4 => 125 mm 0.82 3 1/2 => 110 mm - 5.97 1.81 1.58 3.62


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nr_11MM pollici - SDR 11\NI10143.dwg


DESC:


DRAWING No:

SHEET OF REV.NR_11MM

LONG SPIGOT MALE CONCENTRIC REDUCERSSDR11

NI10143

1 1 -1

L1 L2

L

ND

1

ND

2

S1 S2

CODE ND1 S1 ND2 S2 L1 L2 L27NR754011MM 2 1/2 => 75 mm 0.27 1 1/4 => 40 mm 0.15 2.56 1.89 5.6327NR755011MM 2 1/2 => 75 mm 0.27 1 1/2 => 50 mm 0.18 2.56 1.89 5.5527NR756311MM 2 1/2 => 75 mm 0.27 2 => 63 mm 0.23 2.80 2.52 5.9027NR905011MM 3 => 90 mm 0.32 1 1/2 => 50 mm 0.18 2.87 2.24 5.9827NR906311MM 3 => 90 mm 0.32 2 => 63 mm 0.23 2.80 2.24 5.9027NR907511MM 3 => 90 mm 0.32 2 1/2 => 75 mm 0.27 3.19 2.84 6.8927NR1106311MM 3 1/2 => 110 mm 0.39 2 => 63 mm 0.23 3.35 2.76 6.8927NR1107511MM 3 1/2 => 110 mm 0.39 2 1/2 => 75 mm 0.27 3.47 2.28 7.2827NR1109011MM 3 1/2 => 110 mm 0.39 3 => 90 mm 0.32 3.07 2.76 6.8927NR1257511MM 4 => 125 mm 0.45 2 1/2 => 75 mm 0.27 3.62 2.36 7.8427NR1259011MM 4 => 125 mm 0.45 3 => 90 mm 0.32 3.39 2.76 7.3227NR12511011MM 4 => 125 mm 0.45 3 1/2 => 110 mm 0.39 3.50 3.03 7.3627NR16011011MM 6 => 160 mm 0.57 3 1/2 => 110 mm 0.39 4.06 3.46 8.4627NR16012511MM 6 => 160 mm 0.57 4 => 125 mm 0.45 4.02 3.58 8.4327NR20016011MM 8 => 200 mm 0.72 6 => 160 mm 0.58 4.65 3.98 9.45


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nman pollici\NI10144.dwg


DESC:


DRAWING No:

SHEET OF REV.NMAN COUPLINGS - SOCKET FUSION

NI10144

1 1 0

ND

D1 D

L1L

CODE ND D1 D L1 L27NMAN20 1/2 => 20 mm 0.71 1.14 0.67 1.3827NMAN25 3/4 => 25 mm 0.79 1.38 0.71 1.5427NMAN32 1 => 32 mm 1.18 1.81 0.79 1.6927NMAN40 1 1/4 => 40 mm 1.46 2.21 0.87 1.8927NMAN50 1 1/2 => 50 mm 1.85 2.76 0.98 2.1327NMAN63 2 => 63 mm 2.36 3.47 1.14 2.4427NMAN75 2 1/2 => 75 mm 2.76 3.98 1.30 2.8027NMAN90 3 => 90 mm 3.45 4.51 1.46 3.0327NMAN110 3 1/2 => 110 mm 4.17 5.95 1.69 3.6227NMAN125 4 => 125 mm 4.61 6.30 1.87 4.02

PRODUCT RANGE


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nctv pollici\NI10141.dwg


DESC:


DRAWING No:

SHEET OF REV.NCTV SIDE ELBOW THREE OUTLETS -

SOCKET FUSION NI10141

1 1 0

D1NDD

L1L2

L

H1

H

CODE ND D1 D L1 L2 L H1 H27NCTV20 1/2" => 20 mm 0.71 1.10 0.59 1.02 1.58 1.02 1.58


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntf_NPT pollici\NI10060.dwg


DESC:


DRAWING No:

SHEET OF REV.NTF_NPT FEMALE THREADED TEE - NPT - LEAD

FREE BRASS NI10060

1 1 -1

H

H1

NDD

L1

L2L

LTh.

min

Thread

H1

H

LL2

L1

Thread

NDD

LTh.

min

TYPE A TYPE B

D2

D1 D1

D2

CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTF2012NPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 1.54 2.1127NTF2512NPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 1.54 2.2227NTF2534NPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 1.54 2.2227NTF3212NPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 1.61 2.4427NTF3234NPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 1.61 2.4427NTF321NPT (B) 1 => 32 mm 0.95 2.13 2.13 1" NPT 0.66 0.79 1.85 3.74 1.54 2.60

PP-RCTwww.nupiindustrieitaliane.com - [email protected]

ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\TnirrB\NB10053.dwg


DESC:


DRAWING No:

SHEET OFREV.TNIRRBNIRON MONO BLUE PP-RCT PIPE

NB10053

1 1 0

CODESDRDnS minDiWeight (Kg/m)27TNIRRB20737.3202,814,400,1527TNIRRB25737.3253,518,000,2327TNIRRB3299323,624,800,3127TNIRRB401111403,732,600,4027TNIRRB501111504,640,800,6327TNIRRB631111635,851,400,9927TNIRRB751111756,861,401,3727TNIRRB901111908,273,601,9927TNIRRB110111111010,090,002,9627TNIRRB125111112511,4102,203,8427TNIRRB160111116014,6130,806,2227TNIRRB631717633,855,400,6827TNIRRB751717754,566,000,9727TNIRRB901717905,479,201,3927TNIRRB11017171106,696,802,0327TNIRRB12517171257,4110,202,6027TNIRRB16017171609,5141,004,25

S min

Dn Di


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Tnirr\NB10054.dwg


DESC:


DRAWING No:

SHEET OFREV.TNIRRNIRON MONO GREY PP-RCT PIPE

NB10054

1 2 0

CODESDRDnS minDiWeight (Kg/m)27TNIRR20737.3202,814,400,1527TNIRR25737.3253,518,000,2327TNIRR3299323,624,800,3127TNIRR401111403,732,600,4027TNIRR501111504,640,800,6327TNIRR631111635,851,400,9927TNIRR751111756,861,401,3727TNIRR901111908,273,601,9927TNIRR110111111010,090,002,9627TNIRR125111112511,4102,203,8427TNIRR160111116014,6130,806,2227TNIRR200111120018,2163,609,7627TNIRR250111125022,7204,6015,027TNIRR315111131528,6257,8023,727TNIRR355111135532,2290,6030,027TNIRR400111140036,3327,4038,227TNIRR450111145040,9368,2048,127TNIRR500111150045,4409,2059,127TNIRR560111156050,8458,4074,027TNIRR630111163057,2515,6093,5

S min

Dn Di


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\TnirCL\NB10055.dwg


DESC:


DRAWING No:

SHEET OFREV.TNIRCLNIRON MULTI CLIMA PP-RCT PIPE

NB10055

1 3 0

CODESDRDnS minDiWeight (kg/m)27TNIRCL20737.3202,814,400,1627TNIRCL2573 7.3253,518,000,2527TNIRCL32737.3324,423,200,4027TNIRCL40737.3405,529,000,6227TNIRCL50737.3506,936,200,9527TNIRCL63737.3638,645,801,4827TNIRCL75737.37510,354,402,1027TNIRCL90737.39012,365,403,0127TNIRCL110737.311015,179,804,5227TNIRCL125737.312517,190,805,7827TNIRCL160737.316021,9116,209,3627TNIRCL200737.320027,4145,2015,5727TNIRCL250737.325034,2181,6024,3627TNIRCL315737.331541,1232,8038,2527TNIRCL355737.335548,5258,0048,29

27TNIRCL329 9323,624,800,33

DnS

min

Di


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ng9073_MM SDR7.3\NB10005.dwg


DESC:


DRAWING No:

SHEET OF REV.NG9073_MM

90° ELBOW - LONG SPIGOT SDR 7.3PP-RCT

NB10005

1 2 0

CODE Dn S min L1 L2 H27NG907363MM 63 8,6 70 120 15427NG907375MM 75 10,3 70 130 16227NG907390MM 90 12,3 89 146 19727NG9073110MM 110 15,1 87 155 212,527NG9073125MM 125 17,1 95 185 250,527NG9073160MM 160 21,9 101 210 293,5

L1L2

H

S m

inDn


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nc4573_MM SDR7.3\NB10014.dwg


DESC:


DRAWING No:

SHEET OF REV.NC4573_MM

45° ELBOW - LONG SPIGOTSDR 7.3 PP-RCT

NB10014

1 2 0

S min

L1

H

CODE Dn S min L1 H27NC457363MM 63 8,6 69 17527NC457375MM 75 10,3 73 19027NC457390MM 90 12,3 90 23527NC4573110MM 110 15,1 87 24227NC4573125MM 125 17,1 95 264,527NC4573160MM 160 21,9 103 311

Dn


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nt73_MM SDR7.3\NB10018.dwg

All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874

DESC:


DRAWING No:

SHEET OF REV.NT73_MM

TEE - LONG SPIGOT SDR 7.3 PP-RCT

NB10018

1 2 0

S m

in

L1L2

CODE Dn S min L1 L227NT7363MM 63 8,6 70 12027NT7375MM 75 10,3 70 11727NT7390MM 90 12,3 90 148,527NT73110MM 110 15,1 87 15527NT73125MM 125 17,1 95 18527NT73160MM 160 21,9 110 217

Dn


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ntr11_M SDR11\NB10022.dwg


DESC:


DRAWING No:

SHEET OF REV.NTR11_M MALE SIDE FUSION REDUCED TEE - LONG

SPIGOTSDR 11 PP-RCT

NB10022

1 4 0

CODE Dn1 Dn2 S1 min S2 min L1 L2 L H1 H27NTR1116063M160 160 63 14,6 5,8 97 35 300 141 22127NTR1116075M160 160 75 14,6 6,8 97 82,5 320 185 26527NTR1116090M160 160 90 14,6 8,2 97 78 330 189 26927NTR11160110M160 160 110 14,6 10,0 97 78 334 196 27627NTR11160125M160 160 125 14,6 11,4 97 100 369 223 30327NTR11200M63200 200 63 18,2 5,8 106,5 35 320 161 26127NTR1120075M200 200 75 18,2 6,8 106,5 82,5 320 205 30527NTR1120090M200 200 90 18,2 8,2 106,5 78 350 209 30927NTR11200110M200 200 110 18,2 10,0 106,5 78 373 216 31627NTR11200125M200 200 125 18,2 11,4 106,5 100 388 243 34327NTR11200160M200 200 160 18,2 14,6 106,5 97 438 235 33527NTR1125063M250 250 63 22,7 5,8 121 35 343 186 31127NTR1125075M250 250 75 22,7 6,8 121 82,5 345 205 35527NTR1125090M250 250 90 22,7 8,2 121 78 378 234 35927NTR11250110M250 250 110 22,7 10,0 121 78 402 241 36627NTR11250125M250 250 125 22,7 11,4 121 100 417 268 39327NTR11250160M250 250 160 22,7 14,6 121 97 467 313 43827NTR11250200M250 250 200 22,7 18,2 121 - - - -

S1 m

inD

n 1

L1

L2

L

HH

1

S2 min

Dn2


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nwye11 SDR11\NB10086.dwg


DESC:


DRAWING No:

SHEET OF REV.NWYE11 TEE A 45° - CODOLO LUNGO

WYE LATERAL 45° - LONG SPIGOTSDR 11

NB10086

1 1 0

L

45°L1

S m

inDn

CODE Dn S min L1 L27NWYE1190 90 8,2 200 55627NWYE11110 110 10,0 200 55627NWYE11125 125 11,4 200 57727NWYE11160 160 14,6 200 62627NWYE11200 200 18,2 200 74027NWYE11250 250 22,7 250 96027NWYE11315 315 28,6 250 115027NWYE11355 355 32,2 250 129027NWYE11400 400 36,3 250 1405


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngmf pollici\NI10134.dwg


DESC:


DRAWING No:

SHEET OF REV.NGMF STREET 90° ELBOW -SOCKET FUSION

NI10134

1 1 0

D1

H1

H

L1

L

ND

2

L2ND1

D

CODE ND1 ND2 D1 D L1 L2 L H1 H27NGMF20 1/2 => 20 mm 1/2 => 20 mm 0.52 1.18 0.63 1.14 1.54 1.12 1.7127NGMF25 3/4 => 25 mm 3/4 => 25 mm 0.65 1.38 0.63 1.30 1.79 1.38 2.0727NGMF32 1 => 32 mm 1 => 32 mm 0.95 1.69 0.79 1.34 1.97 1.87 2.7027NGMF40 1 1/4 => 40 mm 1 1/4 => 40 mm 0.95 1.69 0.49 1.34 1.97 1.87 2.70

FEMALE THREADED ADAPTER - SOCKET FUSIONCODE inchesNRFF (W/LEAD FREE BRASS)NRFF_L (STANDARD BRASS)NRFF_SS (W/NPT STAINLESS STEEL) from ½” x ½” NPT to 5” x 4” NPT

MALE THREADED ADAPTERCODE inchesNRFM (W/LEAD FREE BRASS)NRFM_L (STANDARD BRASS)NRFM_SS (W/NPT STAINLESS STEEL) from ½” x ½” NPT to 5” x 4” NPT

FEMALE THREADED ADAPTER - LONG SPIGOTCODE inchesNRFF11 (W/LEAD FREE BRASS) from 1¼” x ½” NPT to 5” x 4”NPTSDR 11

MALE THREADED ADAPTER - LONG SPIGOTCODE inchesNRFM11 (W/LEAD FREE BRASS) from 1¼” x ½” NPT to 5” x 4”NPTSDR 11

GROOVED MECHANICAL COUPLING ADAPTERCODE inchesNRV_SS from ½” to 1¼”(STAINLESS STEEL)

SDR 11PEX ADAPTER (COLD EXPANSION - ASTM1960)

CODE inchesNPR from ½” x ½” to 1” x 1”

PEX ADAPTER (CRIMP RING - ASTM1807)CODE inchesNPRCR from ½” x ½” to 1” x 1”

COPPER ADAPTERCODE inchesNCUA_L from ½” x ½” CTS

to 1” x 1” CTS

COPPER STUB OUT TRANSITION FITTINGCODE inchesNCUT_L from ½” x ½” CTS

to 1” x 1” CTS

COPPER STUB OUT ELBOW TRANSITION FITTINGCODE inchesNCUTC_L from ½” x ½” CTS

to 1” x 1” CTS

ALL-PLASTIC UNIONS WITH SOCKET FUSION ENDSCODE inchesNBRF from ½” to 1¼”

UNION W/STANDARD BRASS NUTS AND SOCKET FUSION ENDSCODE inchesNCSJ from ½” x ½” to 2” x 2”

INSTABRANCHTM WELDING SOCKLET W/SOCKET FUSION OUTLETCODE inchesNGS from 1½” x 1¼” to 2” x 24”

INSTABRANCHTM WELDING SOCKLET W/SOCKET FEMALE OUTLETCODE inchesNGSF (W/LEAD FREE BRASS)NGSF_L (STANDARD BRASS)NGSF_SS (W/NPT STAINLESS STEEL) from 1¼” x 1½” NPT to 24” x 1” NPT

INSTAHEADERTM PEX ADAPTER (COLD EXPANSION - ASTM F 1960)CODE inchesNPGS from 1¼” x ½” to 5” x 1”

INSTAHEADERTM PEX ADAPTER (CRIMP RING - ASTM F 1807)CODE inchesNPGSCR from 1¼” x ½” to 5” x 1”

END CAPCODE inchesNCC (SOCKET FUSION) from ½” to 5”NCC_M (LONG SPIGOT)SDR 11 - 17 from 2” to 8”NCC_MS (SHORT SPIGOT)SDR 7.3-11-17 from 6” to 24”

STUB FLANGECODE inchesNCOSA (SOCKET FUSION) from 1” to 5”NCRT (LONG SPIGOT)SDR 7.3-11-17 from 1” to 12”NCRT_S (SHORT SPIGOT)SDR 11-17 from 12” to 24”

BACKING RING ANSI/ASA 150CODE inchesFLAACPP from 1” to 10”FLAVN from 12” to 22”FLAAC 24”

GASKET LOW - STRESS EPDMCODE inchesGRET from 1” x 18”

ELECTROFUSION FITTINGS

ELECTROFUSION COUPLINGCODE inches

NME from ½” to 18”SDR 11NME_17 from 12” to 24”

ELECTROFUSION REDUCERCODE inchesNRDE from ½” x ¾” to 8” x 6”SDR 11

ELECTROFUSION 90° ELBOWCODE inchesNGEM from ½” to 8”SDR 11

ELECTROFUSION 45° ELBOWCODE inchesNCEM from 1” to 8”SDR 11

ELECTROFUSION TEECODE inchesNTCE from ½” to 8”SDR 11

ELECTROLETTM BRANCH FITTINGSCODE inchesNCOL from 1¼” x ¾” to 12” x 5”

SDR 11

VALVES

PPR TRUE UNION BALL VALVECODE inchesNRSPPVKD from ½” to 4”

PPR BALL VALVECODE inchesNRSL from ½” to 1”

TRUE UNION BALL VALVECODE inchesNRSFN from 1¼” to 2”

PP-RCT COMPRESSION FITTING

COUPLINGCODE inches

NKMAN from ½” to 4”

90° ELBOWCODE inches

NKG from ½” to 4”

REDUCERCODE inchesNKR from ¾”x½” to 4”x3"

90° TEECODE inchesNKT from ½” to 4”


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm_NPT pollici\NI10062.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFM_NPT

MALE THREADED ADAPTERS NPT - LEAD FREE BRASS NI10062

1 1 -1

Thre

adD

LTh. minL1

L

ND

D1

Thre

ad

DLTh. min

L1

L

LCH

CH

NDD1

Thre

adC

HD

LTh. minL1

L

NDD1

TYPE A TYPE B TYPE C LCH

CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFM2012NPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 2.17 - -27NRFM2034NPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 2.48 - -27NRFM2512NPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 2.21 - -27NRFM2534NPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.69 2.44 - -27NRFM3234NPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.79 2.70 - -27NRFM321NPT (A) 1 => 32 mm 1" NPT 0.68 0.95 2.13 0.79 2.80 - -27NRFM401NPT (C) 1 1/4 => 40 mm 1" NPT 0.68 0.95 2.21 0.87 3.39 1.34 0.5127NRFM40114NPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.71 1.30 2.56 0.87 3.58 1.65 0.5927NRFM50114NPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.71 1.30 2.76 0.98 3.66 1.65 0.5927NRFM50112NPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.72 1.50 2.95 0.98 3.68 1.97 0.5927NRFM63112NPT (C) 2 => 63 mm 1"1/2 NPT 0.72 1.50 3.47 1.14 3.84 1.97 0.5927NRFM632NPT (B) 2 => 63 mm 2" NPT 0.76 1.95 3.62 1.14 4.13 2.36 0.7127NRFM752NPT (C) 2 1/2 => 75 mm 2" NPT 0.76 1.95 4.06 1.30 4.29 2.36 0.7127NRFM75212NPT (B) 2 1/2 => 75 mm 2"1/2 NPT 1.14 2.50 4.33 1.30 4.41 3.15 0.7927NRFM903NPT (B) 3 => 90 mm 3" NPT 1.20 2.95 5.08 1.46 5.08 3.54 0.9127NRFM1104NPT (B) 3 1/2 => 110 mm 4" NPT 1.30 3.92 6.30 1.69 5.83 4.53 1.1827NRFM1254NPT (C) 4 => 125 mm 4" NPT 1.30 3.92 6.30 1.87 6.00 4.53 1.18


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff_NPT pollici\NI10061.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFF_NPT

FEMALE THREADED ADAPTERS NPT - LEAD FREE BRASS NI10061

1 1 -1

NDD1D

L1L

LTh. min

Thre

ad D

Thre

ad

NDD1

LLTh. min

LCH

L1

CH D CH

Thre

ad

NDD1

L1LTh. minL

LCHTYPE A TYPE B TYPE C

CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFF2012NPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 1.58 - -27NRFF2034NPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 1.81 - -27NRFF2512NPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 1.61 - -27NRFF2534NPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.71 1.81 - -27NRFF3234NPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.85 2.03 - -27NRFF321NPT (A) 1 => 32 mm 1" NPT 0.66 0.95 2.13 0.79 2.05 - -27NRFF401NPT (C) 1 1/4 => 40 mm 1" NPT 0.66 0.95 2.21 0.87 2.64 1.50 0.5927NRFF40114NPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.68 1.30 2.60 0.87 2.72 1.81 0.5927NRFF50114NPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.68 1.30 2.76 0.98 2.80 1.81 0.5927NRFF50112NPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.68 1.56 2.95 0.98 2.84 2.17 0.5927NRFF63112NPT (C) 2 => 63 mm 1"1/2 NPT 0.68 1.56 3.47 1.14 2.95 2.17 0.5927NRFF632NPT (B) 2 => 63 mm 2" NPT 0.70 1.97 3.62 1.14 3.15 2.56 0.7927NRFF752NPT (C) 2 1/2 =>75 mm 2" NPT 0.70 1.97 4.06 1.30 3.31 2.56 0.7927NRFF75212NPT (B) 2 1/2 =>75 mm 2"1/2 NPT 0.93 2.50 4.33 1.30 3.50 3.15 0.7927NRFF903NPT (B) 3 => 90 mm 3" NPT 1.02 2.95 5.08 1.46 3.90 3.74 0.9127NRFF1104NPT (B) 3 1/2 => 110 mm 4" NPT 1.09 3.92 6.30 1.69 4.37 4.72 1.1827NRFF1254NPT (C) 4 => 125 mm 4" NPT 1.09 3.92 6.30 1.87 4.55 4.72 1.18


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff_ss NPT pollici\NI10184.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFF_SSNPT

FEMALE THREADED ADAPTERS NPT - STAINLESS STEEL NI10184

1 1 0

NDD1D

L1L

LTh. min

Thre

ad D

Thre

ad

NDD1

LLTh. min

LCH

L1

CH D CH

Thre

ad

NDD1

L1LTh. minL

LCHTYPE A TYPE B TYPE C

CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFF2012SSNPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 1.58 - -27NRFF2034SSNPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 1.81 - -27NRFF2512SSNPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 1.61 - -27NRFF2534SSNPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.71 1.81 - -27NRFF3234SSNPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.85 2.03 - -27NRFF321SSNPT (A) 1 => 32 mm 1" NPT 0.66 0.95 2.13 0.79 2.05 - -27NRFF401SSNPT (C) 1 1/4 => 40 mm 1" NPT 0.66 0.95 2.21 0.87 2.64 1.50 0.5927NRFF40114SSNPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.68 1.30 2.60 0.87 2.72 1.81 0.5927NRFF50114SSNPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.68 1.30 2.76 0.98 2.80 1.81 0.5927NRFF50112SSNPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.68 1.56 2.95 0.98 2.84 2.17 0.5927NRFF63112SSNPT (C) 2 => 63 mm 1"1/2 NPT 0.68 1.56 3.47 1.14 2.95 2.17 0.5927NRFF632SSNPT (B) 2 => 63 mm 2" NPT 0.70 1.97 3.62 1.14 3.15 2.56 0.7927NRFF752SSNPT (C) 2 1/2 =>75 mm 2" NPT 0.70 1.97 4.06 1.30 3.31 2.56 0.7927NRFF75212SSNPT (B) 2 1/2 =>75 mm 2"1/2 NPT 0.93 2.50 4.33 1.30 3.50 3.15 0.7927NRFF903SSNPT (B) 3 => 90 mm 3" NPT 1.02 2.95 5.08 1.46 3.90 3.74 0.9127NRFF1104SSNPT (B) 3 1/2 => 110 mm 4" NPT 1.09 3.92 6.30 1.69 4.37 4.72 1.1827NRFF1254SSNPT (C) 4 => 125 mm 4" NPT 1.09 3.92 6.30 1.87 4.55 4.72 1.18


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm_ss NPT pollici\NI10186.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFM_SSNPT

MALE THREADED ADAPTERS NPT - STAINLESS STEEL NI10186

1 1 0

Thre

adD

LTh. minL1

L

ND

D1

Thre

ad

DLTh. min

L1

L

LCH

CH

NDD1

Thre

adC

HD

LTh. minL1

L

NDD1

TYPE A TYPE B TYPE C LCH

CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFM2012SSNPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 2.17 - -27NRFM2034SSNPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 2.48 - -27NRFM2512SSNPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 2.21 - -27NRFM2534SSNPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.69 2.44 - -27NRFM3234SSNPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.79 2.70 - -27NRFM321SSNPT (A) 1 => 32 mm 1" NPT 0.68 0.95 2.13 0.79 2.80 - -27NRFM401SSNPT (C) 1 1/4 => 40 mm 1" NPT 0.68 0.95 2.21 0.87 3.39 1.34 0.5127NRFM40114SSNPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.71 1.30 2.56 0.87 3.58 1.65 0.5927NRFM50114SSNPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.71 1.30 2.76 0.98 3.66 1.65 0.5927NRFM50112SSNPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.72 1.50 2.95 0.98 3.68 1.97 0.5927NRFM63112SSNPT (C) 2 => 63 mm 1"1/2 NPT 0.72 1.50 3.47 1.14 3.84 1.97 0.5927NRFM632SSNPT (B) 2 => 63 mm 2" NPT 0.76 1.95 3.62 1.14 4.13 2.36 0.7127NRFM752SSNPT (C) 2 1/2 => 75 mm 2" NPT 0.76 1.95 4.06 1.30 4.29 2.36 0.7127NRFM75212SSNPT (B) 2 1/2 => 75 mm 2"1/2 NPT 1.14 2.50 4.33 1.30 4.41 3.15 0.7927NRFM903SSNPT (B) 3 => 90 mm 3" NPT 1.20 2.95 5.08 1.46 5.08 3.54 0.9127NRFM1104SSNPT (B) 3 1/2 => 110 mm 4" NPT 1.30 3.92 6.30 1.69 5.83 4.53 1.1827NRFM1254SSNPT (C) 4 => 125 mm 4" NPT 1.30 3.92 6.30 1.87 6.00 4.53 1.18


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngs pollici\NI10243.dwg


DESC:


DRAWING No:

SHEET OF REV.NGS WELDING SADDLES W/SOCKET

FUSION OUTLETS NI10243

1 3 -3

CODE ND1 ND2 D1 D L1 L2 L27NGS2040 1/2" => 20 mm 1 ¼" => 40 mm 0.98 1.38 0.59 0.79 1.4427NGS2050 1/2" => 20 mm 1 ½" = > 50 mm 0.98 1.38 0.59 0.79 1.2827NGS206375 1/2" => 20 mm 2"= > 63 mm

2 ½" = > 75 mm 0.98 1.38 0.59 0.79 1.20

27NGS2090110125 1/2" => 20 mm3" = > 90 mm4" = > 110 mm5" = > 125 mm

0.98 1.38 0.59 0.79 1.16

27NGS20160200 1/2" => 20 mm 6" = > 160 mm8" = > 200 mm 0.98 1.38 0.59 0.79 1.12

27NGS20250315 1/2" => 20 mm 10" = > 250 mm12" = > 315 mm 0.98 1.38 0.59 0.79 1.10

27NGS20355630 1/2" => 20 mm 14"-24" => 355-630 mm 0.98 1.38 0.59 0.79 1.10

27NGS2540 3/4" => 25 mm 1 ¼" => 40 mm 0.98 1.38 0.59 0.85 1.5027NGS2550 3/4" => 25 mm 1 ½" = > 50 mm 0.98 1.38 0.59 0.85 1.3327NGS256375 3/4" => 25 mm 2"= > 63 mm

2 ½" = > 75 mm 0.98 1.38 0.65 0.85 1.26

27NGS2590110125 3/4" => 25 mm3" = > 90 mm4" = > 110 mm5" = > 125 mm

0.98 1.38 0.65 0.85 1.18

27NGS25160200 3/4" => 25 mm 6" = > 160 mm8" = > 200 mm 0.98 1.38 0.65 0.85 1.18

27NGS25250315 3/4" => 25 mm 10" = > 250 mm12" => 315 mm 0.98 1.38 0.65 0.85 1.16

27NGS25355630 3/4" => 25 mm 14"-24" => 355-630 mm 0.98 1.38 0.65 0.85 1.16

D1

L2L1

L

ND2

ND

1 D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngsf_NPT pollici\NI10145.dwg


DESC:


DRAWING No:

SHEET OF REV.NGSF_NPT

FEMALE THREADED SADDLE - LEAD FREE BRASS NI10145

1 1 0

NDD

1S

LTh. min

L

D

CODE ND S Thread L Thread min D1 D2 D L1 L27NGSF4012NPT 1 1/4 = 40 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF5012NPT 1 1/2 = 50 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF6312NPT 2 => 63 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8327NGSF7512NPT 2 1/2 => 75 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.7727NGSF9012NPT 3 => 90 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8427NGSF11012NPT 3 1/2 => 110 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.9427NGSF5034NPT 1 1/2 = 50 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.71 1.63 2.0527NGSF6334NPT 2 => 63 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8327NGSF7534NPT 2 1/2 => 75 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.7727NGSF9034NPT 3 => 90 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8427NGSF11034NPT 3 1/2 => 110 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.9627NGSF631NPT 2 => 63 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.2627NGSF751NPT 2 1/2 => 75 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1427NGSF901NPT 3 => 90 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1827NGSF1101NPT 3 1/2 => 110 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.27

L1


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngsf_ss NPT pollici\NI10187.dwg


DESC:


DRAWING No:

SHEET OF REV.NGSF_SSNPT

FEMALE THREADED SADDLE - STAINLESS STEEL NI10187

1 1 0

NDD

1S

LTh. min

L

D

CODE ND S Thread L Thread min D1 D2 D L1 L27NGSF4012SSNPT 1 1/4 = 40 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF5012SSNPT 1 1/2 = 50 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF6312SSNPT 2 => 63 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8327NGSF7512SSNPT 2 1/2 => 75 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.7727NGSF9012SSNPT 3 => 90 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8427NGSF11012SSNPT 3 1/2 => 110 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.9427NGSF5034SSNPT 1 1/2 = 50 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.71 1.63 2.0527NGSF6334SSNPT 2 => 63 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8327NGSF7534SSNPT 2 1/2 => 75 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.7727NGSF9034SSNPT 3 => 90 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8427NGSF11034SSNPT 3 1/2 => 110 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.9627NGSF631SSNPT 2 => 63 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.2627NGSF751SSNPT 2 1/2 => 75 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1427NGSF901SSNPT 3 => 90 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1827NGSF1101SSNPT 3 1/2 => 110 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.27

L1


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncosa pollici\NI10158.dwg


DESC:


DRAWING No:

SHEET OF REV.NCOSA STUB FLANGE SOCKET FUSION

NI10158

1 2 0

ND

D2

D1

D

L1

L

CODE ND D1 D2 D L1 L27NCOSA32 1 => 32 mm 1.10 1.60 2.01 0.71 1.0227NCOSA40 1 1/4 => 40 mm 1.42 1.95 2.52 0.81 1.1827NCOSA50 1 1/2 => 50 mm 1.83 2.40 2.88 0.93 1.3427NCOSA63 2 => 63 mm 2.22 2.99 3.56 1.08 1.5027NCOSA75 2 1/2 => 75 mm 2.80 3.54 4.11 1.18 1.65


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nme pollici\NI10164.dwg


DESC:


DRAWING No:

SHEET OF REV.NME ELECTROFUSION COUPLINGS

NI10164

1 1 0

CODE ND L1 L H D27NME20 1/2 => 20 mm 1.34 2.76 2.05 1.3027NME25 3/4 => 25 mm 1.34 2.76 2.28 1.5227NME32 1 => 32 mm 1.34 2.76 2.56 1.7927NME40 1 1/4 => 40 mm 1.61 3.35 2.95 2.1727NME50 1 1/2 => 50 mm 1.67 3.47 3.43 2.6827NME63 2 => 63 mm 1.67 3.86 3.94 3.2327NME75 2 1/2 => 75 mm 2.40 4.92 4.49 3.8627NME90 3 => 90 mm 2.84 5.75 5.12 4.4527NME110 3 1/2 => 110 mm 3.03 6.10 5.67 5.3527NME125 4 => 125 mm 3.23 6.54 6.58 6.1627NME160 6 => 160 mm 3.41 6.89 7.93 7.4827NME200 8 => 200 mm 3.60 7.28 9.57 9.1327NME250 10 => 250 mm 4.17 8.35 11.81 11.6527NME315 12 => 315 mm 4.72 9.45 14.69 14.67

ND

L1

L

H

D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrde pollici\NI10201.dwg


DESC:


DRAWING No:

SHEET OF REV.NRDE ELECTROFUSION REDUCER

NI10201

2 2 0

CODE ND1 ND2 D L1 L2 L3 L H27NRDE4032 1 1/4=> 40 mm 1 => 32 mm 2.17 1.85 1.65 - 3.74 2.9127NRDE5032 1 1/2 => 50 mm 1 => 32 mm 2.52 1.95 1.63 - 3.94 3.3527NRDE5040 1 1/2 => 50 mm 1 1/4=> 40 mm 2.52 1.95 1.87 - 4.06 3.3527NRDE6332 2 => 63 mm 1 => 32 mm 3.21 2.19 1.65 - 4.65 3.9027NRDE6340 2 => 63 mm 1 1/4=> 40 mm 3.21 2.17 1.77 - 4.65 3.9027NRDE6350 2 => 63 mm 1 1/2 => 50 mm 3.21 2.19 1.97 - 4.65 3.9027NRDE7563 2 1/2 => 75 mm 2 => 63 mm 3.82 2.36 2.24 - 4.92 4.4927NRDE9063 3 => 90 mm 2 => 63 mm 4.53 2.68 2.44 - 5.91 5.1627NRDE1163 3 1/2 => 110 mm 2 => 63 mm 5.31 2.85 2.48 - 6.30 5.9327NRDE1190 3 1/2 => 110 mm 3 => 90 mm 5.31 2.87 2.70 - 6.22 5.93

ND

1

ND

2

D

H

L1 L2

L


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngem pollici\NI10161.dwg


DESC:


DRAWING No:

SHEET OF REV.NGEM ELECTROFUSION 90° ELBOW

NI10161

1 1 -1

CODE ND L1 L2 L H27NGEM20 (A) 1/2 => 20 mm 1.34 1.99 2.05 3.7627NGEM25 (A) 3/4 => 25 mm 1.46 2.13 2.24 4.0227NGEM32 (B) 1 => 32 mm 1.34 2.26 2.52 3.1527NGEM40 (B) 1 1/4 => 40 mm 1.61 2.56 2.87 3.6027NGEM50 (B) 1 1/2 => 50 mm 1.89 3.03 3.31 4.3127NGEM63 (B) 2 => 63 mm 2.09 3.46 3.94 5.0827NGEM75 (B) 2 1/2 => 75 mm 2.28 3.82 4.33 5.5927NGEM90 (B) 3 => 90 mm 3.07 4.69 5.24 6.9327NGEM110 (B) 3 1/2 => 110 mm 3.27 5.67 6.46 8.43

TYPE A TYPE B

TYPE A

TYPE B

L1L2

DN

L

H ND

L1L2

L

H


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncem pollici\NI10162.dwg


DESC:


DRAWING No:

SHEET OF REV.NCEM ELECTROFUSION 45° ELBOW

NI10162

1 1 -1

CODE ND L1 L2 L H27NCEM32 1 => 32 mm 1.41 1.83 2.54 3.7027NCEM40 1 1/4 => 40 mm 1.61 2.11 2.95 4.2927NCEM50 1 1/2 => 50 mm 1.89 2.46 3.27 5.0427NCEM63 2 => 63 mm 2.09 2.68 3.94 5.7927NCEM75 2 1/2 => 75 mm 2.36 3.19 4.45 6.6527NCEM90 3 => 90 mm 2.76 3.90 5.28 8.1927NCEM110 3 1/2 => 110 mm 3.27 4.49 6.36 9.49

ND

L1L2

L

H


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntce pollici\NI10200.dwg


DESC:


DRAWING No:

SHEET OF REV.NTCE SINGLE-WIRE ELECTROFUSION

EQUAL TEE WITH SPIGOT END NI10200

1 1 0

ND

1

L2

LL1

SND2

HH

1

L3

CODE ND1 ND2 S D L1 L2 L3 L H1 H27NTCE020 1/2 => 20 mm 1/2 => 20 mm 0.12 1.26 1.48 1.81 2.05 1.77 2.62 3.2727NTCE025 3/4 => 25 mm 3/4 => 25 mm 0.12 1.46 1.48 1.81 2.24 1.97 2.70 3.4327NTCE032 1 => 32 mm 1 => 32 mm 0.12 1.73 1.48 1.85 2.52 2.17 2.95 3.8027NTCE040 1 1/4 => 40 mm 1 1/4 => 40 mm 0.15 2.13 1.73 2.13 2.91 2.62 3.31 4.3727NTCE050 1 1/2 => 50 mm 1 1/2 => 50 mm 0.18 2.56 1.83 2.40 3.35 3.01 3.94 5.2627NTCE063 2 => 63 mm 2 => 63 mm 0.23 3.15 2.24 2.68 3.90 3.54 4.53 6.1427NTCE075 2 1/2 => 75 mm 2 1/2 => 75 mm 0.27 3.74 2.28 2.83 4.41 3.86 5.12 7.0127NTCE110 3 1/2 => 110 mm 3 1/2 => 110 mm 0.39 5.47 3.27 3.48 6.16 5.67 6.97 9.7227NTCE160 6 => 160 mm 6 => 160 mm 0.57 7.48 3.42 4.13 7.93 5.94 8.19 11.93

D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkman pollici\NI10214.dwg


DESC:


DRAWING No:

SHEET OF REV.NKMAN COUPLER - COMPRESSION FITTINGS

NI10214

1 1 -1

ND

L

L1

H

CODE ND L1 L H03NKMAN20 1/2 => 20 mm 2.07 4.69 1.7703NKMAN25 3/4 => 25 mm 2.15 4.69 2.0903NKMAN32 1 => 32 mm 2.46 5.43 2.5403NKMAN40 1 1/4 => 40 mm 3.15 6.59 3.2903NKMAN50 1 1/2 => 50 mm 3.54 7.24 3.7803NKMAN63 2 => 63 mm 4.33 8.84 4.4503NKMAN75 2 1/2 => 75 mm 4.76 9.69 5.2003NKMAN90 3 => 90 mm 5.67 11.73 5.9303NKMAN110 3 1/2 => 110 mm 6.91 14.33 6.97


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkg pollici\NI10216.dwg


DESC:


DRAWING No:

SHEET OF REV.NKG 90° ELBOW - COMPRESSION FITTINGS

NI10216

1 1 -1

ND

L1

H1

H

L

CODE ND L1 L H1 H03NKG20 1/2 => 20 mm 2.07 3.68 2.72 3.6803NKG25 3/4 => 25 mm 2.15 3.94 2.87 3.9403NKG32 1 => 32 mm 2.46 4.72 3.39 4.7203NKG40 1 1/4 => 40 mm 3.15 5.98 4.29 5.9803NKG50 1 1/2 => 50 mm 3.54 6.61 4.80 6.6103NKG63 2 => 63 mm 4.33 7.91 5.79 7.9103NKG75 2 1/2 => 75 mm 4.76 9.29 6.69 9.2903NKG90 3 => 90 mm 5.67 11.10 8.15 11.1003NKG110 3 1/2 => 110 mm 6.91 13.05 9.57 13.05


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkr pollici\NI10215.dwg


DESC:


DRAWING No:

SHEET OF REV.NKR REDUCER - COMPRESSION FITTINGS

NI10215

1 1 -1

L

L1 L2

ND

1

ND

2

H

CODE ND1 ND2 L1 L2 L H03NKR2520 3/4 => 25 mm 1/2 => 20 mm 2.15 2.07 4.37 2.0903NKR3220 1 => 32 mm 1/2 => 20 mm 62,5 2.07 5.06 2.5403NKR3225 1 => 32 mm 3/4 => 25 mm 62,5 2.15 5.08 2.5403NKR4025 1 1/4 => 40 mm 3/4 => 25 mm 3.15 2.15 5.71 3.2903NKR4032 1 1/4 => 40 mm 1 => 32 mm 3.15 2.46 5.71 3.2903NKR5032 1 1/2 => 50 mm 1 => 32 mm 3.54 2.46 6.42 3.7803NKR5040 1 1/2 => 50 mm 1 1/4 => 40 mm 3.54 3.15 6.30 3.7803NKR6332 2 => 63 mm 1 => 32 mm 4.33 2.46 7.36 4.4503NKR6340 2 => 63 mm 1 1/4 => 40 mm 4.33 3.15 8.03 4.4503NKR6350 2 => 63 mm 1 1/2 => 50 mm 4.33 3.54 8.98 4.4503NKR7550 2 1/2 => 75 mm 1 1/2 => 50 mm 4.76 3.54 9.00 5.2003NKR7563 2 1/2 => 75 mm 2 => 63 mm 4.76 4.33 9.17 5.2003NKR9063 3 => 90 mm 2 => 63 mm 5.67 4.33 10.02 5.9803NKR9075 3 => 90 mm 2 1/2 => 75 mm 5.67 4.76 11.44 5.9803NKR11090 3 1/2 => 110 mm 3 => 90 mm 6.91 5.67 13.01 7.13


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkt pollici\NI10217.dwg


DESC:


DRAWING No:

SHEET OF REV.NKT 90° TEE - COMPRESSION FITTINGS

NI10217

1 1 -1

ND

L

L2

H1

H

L1

CODE ND L1 L2 L H1 H03NKT20 1/2 => 20 mm 2.07 2.68 5.35 2.68 3.6003NKT25 3/4 => 25 mm 2.15 2.87 5.75 2.87 3.8603NKT32 1 => 32 mm 2.46 3.43 6.85 3.43 4.6503NKT40 1 1/4 => 40 mm 3.15 4.25 8.50 4.25 5.9803NKT50 1 1/2 => 50 mm 3.54 4.80 9.61 4.80 6.8903NKT63 2 => 63 mm 4.33 5.71 11.42 5.71 7.7603NKT75 2 1/2 => 75 mm 4.76 6.61 13.23 6.61 9.2103NKT90 3 => 90 mm 5.67 8.15 16.30 8.15 11.0803NKT110 3 1/2 => 110 mm 6.91 9.61 19.21 9.61 13.09

PRODUCT RANGE


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nbrf pollici\NI10150.dwg


DESC:


DRAWING No:

SHEET OF REV.NBRF ALL-PLASTIC UNIONS WITH SOCKET

FUSION ENDS NI10150

1 1 0

ND

1

ND

2

D1 D

L1 L2

L

CODE ND1 ND2 D1 D L1 L2 L27NBRF20 1/2 => 20 mm 1/2 => 20 mm 0.55 2.09 0.79 0.79 2.8727NBRF25 3/4 => 25 mm 3/4 => 25 mm 0.71 2.24 0.79 0.79 2.7627NBRF32 1 => 32 mm 1 => 32 mm 0.95 2.64 0.79 0.79 2.7627NBRF40 1 1/4 => 40 mm 1 1/4 => 40 mm 1.14 3.03 0.79 0.79 2.76


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff11_NPT pollici SDR11\NI10283.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFF11_NPT

FEMALE THREADED ADAPTER W/NPT LEAD FREE BRASS SDR11 NI10283

1 1 0

CH

L1L

ND D

CODE ND S Thread LTh. min D1 D L1 L CH LCH27NRFF112012NPT 1/2"=>20 mm 0.12 1/2" NPT 0.67 0.51 1.46 1.73 3.31 0.98 0.4327NRFF112534NPT 3/4"=>25 mm 0.12 3/4" NPT 0.71 0.71 1.61 1.73 3.39 1.18 0.4727NRFF11321NPT 1"=>32 mm 0.12 1" NPT 0.83 0.94 1.97 1.89 3.58 1.50 0.5127NRFF11401NPT 1"1/4=>40 mm 0.15 1" NPT 0.83 0.94 1.97 2.09 3.74 1.50 0.5127NRFF1150112NPT 1"1/2=>50 mm 0.18 1 1/2" NPT 0.75 1.50 2.76 2.40 4.25 2.17 0.5927NRFF11632NPT 2"=>63 mm 0.23 2" NPT 0.93 1.93 3.31 2.72 4.80 2.56 0.7927NRFF1175212NPT 2"1/2=75 mm 0.27 2 1/2" NPT 1.19 2.36 4.21 2.99 5.43 3.15 0.9827NRFF11903NPT 3"=>90 mm 0.32 3" NPT 1.31 2.80 4.69 3.43 6.02 3.74 0.9427NRFF111104NPT 4"=>110 mm 0.39 4" NPT 1.55 3.54 5.98 3.35 6.50 4.72 1.1827NRFF111254NPT 5"=>125 mm 0.45 4" NPT 1.55 3.90 6.02 3.74 6.97 4.72 1.18

S

LTh. min

Thre

adD

1

LCH


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm11_NPT pollici SDR11\NI10282.dwg


DESC:


DRAWING No:

SHEET OF REV.NRFM11_NPT

MALE THREADED ADAPTER W/NPT LEAD FREE BRASS SDR11 NB10077

1 1 0

L1LTh. min

LCH

L

CH

CODE ND S Thread LTh. min D1 D L1 L CH LCH27NRFM112012NPT 1/2"=>20 mm 0.12 1/2" NPT 0.52 0.51 1.42 1.73 3.94 0.87 0.4327NRFM112534NPT 3/4"=>25 mm 0.12 3/4" NPT 0.57 0.71 1.61 1.73 4.06 1.06 0.4727NRFM113234NPT 1"=>32 mm 0.12 3/4" NPT 0.57 0.71 1.61 1.85 4.06 1.06 0.4727NRFM11321NPT 1"=>32 mm 0.12 1" NPT 0.66 0.94 1.97 1.89 4.33 1.34 0.5127NRFM11401NPT 1"1/4=>40 mm 0.15 1" NPT 0.66 0.94 1.97 2.17 4.53 1.34 0.5127NRFM1140114NPT 1"1/4=>40 mm 0.15 1 1/4" NPT 0.75 1.22 2.48 2.09 4.88 1.65 0.5927NRFM1150112NPT 1"1/2=>50 mm 0.18 1 1/2" NPT 0.75 1.50 2.76 2.40 5.16 1.97 0.5927NRFM11502NPT 1"1/2=>50 mm 0.18 2" NPT 0.92 1.50 3.27 2.40 5.51 2.36 0.7127NRFM11632NPT 2"=>63 mm 0.23 2" NPT 0.92 1.93 3.27 2.72 5.79 2.36 0.7127NRFM1175212NPT 2"1/2=75 mm 0.27 2 1/2" NPT 1.05 2.36 4.21 3.15 6.42 3.15 0.7927NRFM11903NPT 3"=>90 mm 0.32 3" NPT 1.17 2.80 4.65 3.43 7.20 3.54 0.9127NRFM111104NPT 4"=>110 mm 0.39 4" NPT 1.41 3.54 6.02 3.35 7.95 4.53 1.1827NRFM111254NPT 5"=>125 mm 0.45 4" NPT 1.41 3.90 6.02 3.74 8.43 4.53 1.18

SD1

Thre

ad

ND D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrv_ss pollici\NI10244.dwg


DESC:


DRAWING No:

SHEET OF REV.NRV_SS VICTAULIC ADAPTER STAINLESS

STEEL - LONG SPIGOT - SDR11 NI10244

1 1 0

S

D

Thre

ad

LTh. min L1

L

CODE ND S Thread L Thread min L1 L D27NRV6311SS 2" => 63 mm 0.23 2" 1.18 2.72 5.24 3.2727NRV9011SS 3" => 90 mm 0.32 3" 1.18 3.43 6.26 4.6527NRV11011SS 4" => 110 mm 0.39 4" 1.57 3.35 6.89 6.02

ND


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Npr\NB10081.dwg


DESC:


DRAWING No:

SHEET OF REV.NPR RACCORDO CON ATTACCO PEX

NB10081

1 1 0

Dn

LL1

CD

CODE Dn C LC D L1 L27NPR1220 20 1/2" 18,5 37 16 4027NPR1225 25 1/2" 18,5 37 17 4127NPR3425 25 3/4" 24,5 42 17 4627NPR132 32 1" 30,5 54 20 52

LC


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncsj pollici\NI10230.dwg


DESC:


DRAWING No:

SHEET OF REV.NCSJ UNION W/STANDARD BRASS NUTS

AND SOCKET ENDS NI10230

1 1 0

L1

ND

D1

L

CH

1

CH

2

CODE ND D1 L1 L CH1 CH227NCSJ2020 1/2" - 1/2" => 20-20 mm 0.59 0.55 3.11 1.18 1.8127NCSJ2525 3/4" - 3/4" => 25-25 mm 0.75 0.63 3.35 1.50 2.0527NCSJ3232 1" - 1" => 32-32 mm 1.02 0.71 4.17 1.97 2.6827NCSJ4040 1" 1/4 - 1" 1/4 => 40-40 mm 1.30 0.87 4.72 2.12 3.1527NCSJ5050 1" 1/2 - 1" 1/2 => 50-50 mm 1.69 0.94 5.12 2.79 3.8227NCSJ6363 2" - 2" => 63-63 mm 2.05 1.10 6.02 3.15 4.29


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Npgs pollici\NI10284.dwg


DESC:


DRAWING No:

SHEET OF REV.NPGS PEX ADAPTER (CRIMP) FUSION

WELDING SADDLE NI10284

1 1 0

ND

D1 DC

L1

L

CODE ND C D1 D L1 L27NPGS124050 1" 1/4 => 40 mm

1" 1/2 => 50 mm 1/2" 0.98 1.46 1.24 1.77

27NPGS126375 2" => 63 mm2" 1/2 => 75 mm 1/2" 0.98 1.46 1.24 1.65

27NPGS12901101253" => 90 mm4" => 110 mm5" => 125 mm

1/2" 0.98 1.46 1.24 1.61

27NPGS344050 1" 1/4 => 40 mm1" 1/2 => 50 mm 3/4" 0.98 1.65 1.32 1.85

27NPGS346375 2" => 63 mm2" 1/2 => 75 mm 3/4" 0.98 1.65 1.32 1.73

27NPGS34901101253" => 90 mm4" => 110 mm5" => 125 mm

3/4" 0.98 1.65 1.32 1.69

27NPGS16375 2" => 63 mm2" 1/2 => 75 mm 1" 1.26 2.13 1.50 2.05

27NPGS1901101253" => 90 mm4" => 110 mm5" => 125 mm

1" 1.26 2.13 1.50 1.97


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncc pollici\NI10149.dwg


DESC:


DRAWING No:

SHEET OF REV.NCC END CAP SOCKET FUSION

NI10149

1 1 0

ND

D

L1L

S

CODE ND S D L1 L27NCC20 1/2 => 20 mm 0.13 1.18 0.67 1.1427NCC25 3/4 => 25 mm 0.17 1.40 0.71 1.3427NCC32 1 => 32 mm 0.21 1.77 0.79 1.5827NCC40 1 1/4 => 40 mm 0.26 2.13 0.87 1.6527NCC50 1 1/2 => 50 mm 0.33 2.60 1.00 1.8927NCC63 2 => 63 mm 0.41 3.27 1.34 2.2127NCC75 2 1/2 => 75 mm 0.49 3.90 1.69 2.4027NCC90 3 => 90 mm 0.59 4.69 1.34 2.6827NCC110 3 1/2 => 110 mm 0.72 5.79 1.46 3.1127NCC125 4 => 125 mm 0.82 6.38 1.58 3.43


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncc_11M pollici - SDR 11\NI10219.dwg


DESC:


DRAWING No:

SHEET OF REV.NCC_11M

END CAP - LONG SPIGOTSDR 11 NI10219

1 1 -1

CODE ND S L1 L27NCC6311M 2" => 63 mm 0.23 2.76 3.4327NCC7511M 2" 1/2 => 75 mm 0.27 2.95 3.7427NCC9011M 3" => 90 mm 0.32 3.19 4.1327NCC11011M 4" => 110 mm 0.39 3.54 4.6927NCC12511M 5" => 125 mm 0.45 3.74 5.0427NCC16011M 6" => 160 mm 0.58 4.25 5.5927NCC20011M 8" => 200 mm 0.72 5.24 6.77

L1

L

SN

D


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncc_11MS pollici - SDR 11\NI10225.dwg


DESC:


DRAWING No:

SHEET OF REV.NCC_11MS

END CAP - SHORT SPIGOTSDR 11 NI10225

1 1 -1

CODE ND S L27NCC25011MS 10" => 250 mm 0.89 1.9727NCC31511MS 12" => 315 mm 1.13 1.9727NCC35511MS 14" => 355 mm 1.27 3.1527NCC40011MS 16" => 400 mm 1.43 3.1527NCC45011MS 18" => 450 mm 1.61 3.1527NCC50011MS 20" => 500 mm 1.79 3.1527NCC56011MS 22" => 560 mm 2.00 3.1527NCC63011MS 24" => 630 mm 2.25 3.15

ND

S

L


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Flaacpp pollici\NI10199.dwg


DESC:


DRAWING No:

SHEET OF REV.FLAACPP PP ENCAPSULATED BACKING RING

ANSI/ASA 150 NI10199

1 2 -2

T

hole

s

PC

DIDOD

CODE ND (PP) OD ID PCD T holes N° holes00FLAACPP321 1" => 32 mm 4.25 1.73 3.13 0.63 0.63 400FLAACPP40114 1" 1/4 => 40 mm 4.61 2.05 3.50 0.63 0.63 400FLAACPP50112 1" 1/2 => 50 mm 5.00 2.44 3.88 0.71 0.63 400FLAACPP632 2" => 63 mm 5.98 3.07 4.74 0.71 0.79 400FLAACPP75212 2" 1/2 => 75 mm 7.01 3.62 5.49 0.71 0.79 400FLAACPP903 3" => 90 mm 7.52 4.33 5.98 0.79 0.79 400FLAACPP1104 4" => 110 mm 9.02 5.24 7.50 0.79 0.79 800FLAACPP1255 5" => 125 mm 10.00 5.83 8.50 0.79 0.91 800FLAACPP1606 6" => 160 mm 10.98 7.01 9.49 1.02 0.91 800FLAACPP2008 8" => 200 mm 10.98 9.25 11.75 1.02 0.91 800FLAACPP25010 10" => 250 mm 15.98 11.42 14.25 1.18 1.02 12


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nprcr\NB10091.dwg


DESC:


DRAWING No:

SHEET OF REV.NPRCR PEX ADAPTER (CRIMP RING - ASTM F

1807) WITH SOCKET FUSION ENDS NB10091

1 1 0

DnD C

LC

L1

L

CODE Dn C LC D L1 L27NPRCR1220 20 1/2" 21 37 16 4027NPRCR1225 25 1/2" 21 37 17 4127NPRCR3425 25 3/4" 22 42 17 4627NPRCR132 32 1" 27 54 20 52


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncua_L\NB10090.dwg


DESC:


DRAWING No:

SHEET OF REV.NCUA_L COPPER ADAPTER WITH SOCKET

FUSION ENDS NB10090

1 1 0

L1

Dn1D

Dn2

CODE Dn1 Dn2 D L1 L27NCUA12C20L 20 1/2" CTS 37 16 5727NCUA34C25L 25 3/4" CTS 42 17 6327NCUA1C32L 32 1" CTS 54 20 76


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncut_L\NB10092.dwg


DESC:


DRAWING No:

SHEET OF REV.NCUT_L COPPER STUB OUT TRANSITION

FITTING WITH SOCKET END NB10092

1 1 0

DD

n1

L1

CODE Dn1 Dn2 D L127NCUT12C20L 20 1/2" CTS 37 1627NCUT34C25L 25 3/4" CTS 42 1727NCUT1C32L 32 1" CTS 54 20

Dn2


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncutc_L\NB10093.dwg


DESC:


DRAWING No:

SHEET OF REV.NCUTC_L COPPER STUB OUT ELBOW

TRANSITION FITTING WITH SOCKET FUSION ENDS

NB10093

1 1 0

CODE Dn1 Dn2 D L127NCUTC12C20L 20 1/2" CTS 37 1627NCUTC34C25L 25 3/4" CTS 42 1727NCUTC1C32L 32 1" CTS 54 20

ND2

L1

DND1


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Npgscr\NB10094.dwg


DESC:


DRAWING No:

SHEET OF REV.NPGSCR INSTAHEADER PEX ADAPTER (CRIMP

RING - ASTM F 1807) FUSION WELDING SOCKLET

NB10094

1 1 0

D1

Dn

C D

L

L1

CODE Dn C D1 D L1 L27NPGSCR124050 40-50 1/2" 25 37 31,5 4527NPGSCR126375 63-75 1/2" 25 37 31,5 4227NPGSCR1290110125 90-110-125 1/2" 25 37 31,5 4127NPGSCR344050 40-50 3/4" 25 42 33,5 4727NPGSCR346375 63-75 3/4" 25 42 33,5 4427NPGSCR3490110125 90-110-125 3/4" 25 42 33,5 4327NPGSCR16375 63-75 1" 32 54 38 5227NPGSCR190110125 90-110-125 1" 32 54 38 50


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncrt_11 SDR11\NB10042.dwg


DESC:


DRAWING No:

SHEET OF REV.NCRT_11

STUB FLANGE - LONG SPIGOTSDR 11 PP-RCT

NB10042

1 1 0

CODE Dn S min D D1 L1 L2 L27NCRT3211 32 3,0 68 40 45 10 7827NCRT4011 40 3,7 78 50 63 11 9527NCRT5011 50 4,6 88 61 65 12 9627NCRT6311 63 5,8 102 75 75 14 11627NCRT7511 75 6,8 122 89 84 16 12227NCRT9011 90 8,2 133 105 100 17 154,527NCRT11011 110 10,0 158 125 98,5 18 15027NCRT12511 125 11,4 158 132 122 25 17827NCRT16011 160 14,6 212 175 105 25 18027NCRT20011 200 18,2 268 232 125 32 20027NCRT25011 250 22,7 320 285 132 35 20727NCRT31511 315 28,6 370 335 152 35 228

Dn D

S m

in

L2

L

L1

D1


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncol\NB10079.dwg


DESC:


DRAWING No:

SHEET OF REV.NCOL

COLLARE DI PRESA A TRONCHETTO CON CINGHIABRANCH SADDLE WITH BELT SDR11

NB10079

1 1 0

S minDn2

L1

L

H

Dn1

Max Hole

CODE Dn1 Dn2 S min L1 L H Max Hole27NCOL11025 110 25 3,0 65 140 100 1627NCOL12525 125 25 3,0 65 140 100 1627NCOL16025 160 25 3,0 65 140 100 16

27NCOL12532 125 32 3,0 65 140 100 22,527NCOL16032 160 32 3,0 65 140 100 22,527NCOL20032 200 32 3,0 65 140 100 22,527NCOL25032 250 32 3,0 65 140 100 22,527NCOL31532 315 32 3,0 65 140 100 22,5

27NCOL16063 160 63 5,8 65 140 100 4427NCOL20063 200 63 5,8 65 140 100 4427NCOL25063 250 63 5,8 65 140 100 4427NCOL31563 315 63 5,8 65 140 100 44

27NCOL16090 160 90 8,2 90 170 120 7027NCOL20090 200 90 8,2 90 170 120 7027NCOL25090 250 90 8,2 98 200 130 7027NCOL31590 315 90 8,2 98 200 130 70

27NCOL200110 200 110 10,0 98 200 130 8727NCOL250110 250 110 10,0 98 200 130 8727NCOL315110 315 110 10,0 98 200 130 87

27NCOL200125 200 125 11,4 98 200 130 10027NCOL250125 250 125 11,4 98 200 130 10027NCOL315125 315 125 11,4 98 200 130 100


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncol\NB10078.dwg


DESC:


DRAWING No:

SHEET OF REV.NCOL

BRANCH SADDLE WITH RIGID UNDER CLAMPCOLLARE DI PRESA A TRONCHETTO CON FONDO STAFFA RIGIDO SDR11

NB10078

1 2 0

CODE Dn1 Dn2 S min L1 L H Max Hole27NCOL4025 40 25 3,0 70 100 82 1627NCOL5025 50 25 3,0 70 100 82 1627NCOL6325 63 25 3,0 70 100 82 1627NCOL7525 75 25 3,0 70 100 82 1627NCOL9025 90 25 3,0 70 106 98 1827NCOL4032 40 32 3,0 70 100 82 22,527NCOL5032 50 32 3,0 70 100 82 22,527NCOL6332 63 32 3,0 70 100 82 22,527NCOL9032 90 32 3,0 75 106 98 2527NCOL11032 110 32 3,0 72,5 100 97 22,527NCOL07540 75 40 3,7 70 100 82 3027NCOL9063 90 63 5,8 82 140 100 4427NCOL11063 110 63 5,8 82 140 100 4427NCOL12563 125 63 5,8 82 140 100 44

S minDn2

L1 H

Dn1

Max Hole

L


ITEM:

C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrs_L pollici\NI10153.dwg


DESC:


DRAWING No:

SHEET OF REV.NRSL CONCEALED (EXTRACTABLE) BALL

VALVE W/LEAD FREE BRASS - SOCKET FUSION

NI10153

1 1 0

LL1

H

CODE ND D1 L1 L H1 H27NRSL20 1/2" => 20 mm 0.70 0.75 3.94 2.24 2.9127NRSL25 3/4" => 25 mm 0.70 0.75 3.94 2.24 2.9127NRSL32 1" => 32 mm 0.95 0.83 4.75 2.36 3.23

H1

ND

D1

Nupi Americas, Inc.

1511 Superior Way,Houston - TX 77039 - U.S.A.ph. +1 281 590 4471fax +1 281 590 5268

314 Commerce ParkwayEarly Branch - SC 29916 - U.S.A.ph. +1 803-398-3579fax: +1 803 398 3639

[email protected]

www.nupiamericas.com

pp-rct piping systems - nupi americas · pdf fileassistance and intensive training of...

Documents