OverviewOur service division provides a complete commissioning, inspection and maintenance service for VACON drives*, Uninterruptible Power Supplies* (UPS), Powerhouse DC power systems, Fortress Locks, Power Factor Correction Unit (PFCU) and Conveyor equipment. *Equipment is available for hire - contact our sales team for more information.Our experienced service technicians have been extensively trained on VACON Drives, Uninterruptible Power Supplies UPS, Powerhouse DC Systems & Fortress Interlocks on-site maintenance and PFCU. Because of this training and years of experience, we are able to service the above either on-site or our workshop, so you can be assured of the same quality and professionalism as you will find throughout the rest of our organisation.

OverviewOur infrared cameras produce images of invisible heat radiation and provide precise non-contact measurement capabilities. Electrical thermal imaging inspections:

• Can be performed when systems are under load• Identify and locate trouble spots on electrical connections

Our detailed colour reports inform you exactly what needs to be fixed and allow you to schedule repairs before expensive breakdowns occur.

OverviewAs part of our commitment to customer service, R&D Technology have fully equipped electrical workshops. Our product support engineer and licensed electricians have the expertise to:• Design• Modify• Enclose• Assemble• Calibrate• Test & Inspect• Perform pre delivery commissioning. • We are also happy to attend your site to advise with the application installation on our entire product range.

NewcastleT: 02 4014 9000F: 02 4014 9099

BrisbaneT: 07 3846 2644F: 07 3846 2346

GloucesterT: 02 6558 2986F: 02 6558 1002

MackayT: 07 4952 3833F: 07 4014 9099

Websitewww.rdtechnology.com.au

Email:sales@rdtechnology.com.au

subject to change without notifice.

Service Division

Thermal Imaging Reports

Workshop

Service Division

Thermal Imaging Reports

Workshop

an R&D TechnologyGroup Company

PowerhouseSystems

“Strengthening business through partnerships”

Spec

ialis

ed en

gine

erin

g pro

duct

s

Spec

ialis

ed en

gine

erin

g pro

duct

s

NewcastleT: 02 4014 9000F: 02 4014 9099

BrisbaneT: 07 3846 2644F: 07 3846 2346

GloucesterT: 02 6558 2986F: 02 6558 1002

MackayT: 07 4952 3833F: 07 4014 9099

Websitewww.rdtechnology.com.au

Email:sales@rdtechnology.com.au

subject to change without notifice.

Work that is performed on each service UPS DCSystems PFCU Vacon

DrivesGeneral cleaning of fan vent/filters and external cabinets. P P P P

Main and internal fan check. P P P P

Check operational alarms. P P P P

Inspection and test of internal/ external batteries. P P

Measure output voltage, input voltage, transformer or DC voltages P P

Inspect for contact wear, clean contacts (where applicable) P

Check Control Voltage, DC Currents P

Check output waveform. P

Check capacitance of each capacitor and record P

Perform discharge test. P P

Thermal Imaging Report (where applicable) P P P P

Check fuses and the protection device/system P P P P

On load mains fail test. (Permission Required) P P

Record voltage condition of batteries. P P

Check operating functions of the unit. P P P P

Inspection and comment on installed environment.(Air conditioning operation, dust, moisture etc.) P P P P

Internal Drive or case inspection and clean. (where applicable) P P P P

Internal & external temperature checks (where applicable) P P P P

Fan Capacitors condition test P

System and application software will be documented P

Current parameter settings saved on our system P P P P

Analysis and trend of drive in operation P

Service information downloaded and copy sent to customer P

Check calibration and make adjustments where required. P P P P

Clean & vacuum all internal & external parts P P P P

Check screen and keypad operation. P P P P

Visual inspection of cabling. P P P P

Check current drawn by each capacitor step P

Check connections. P P P P

Check all settings are correct on the controller P P P P

Written report, this includes any recommendations with associated costs P P P P

A maintenance report, including recommendations for future Repair/ maintenance actions, will be created. P P P P

Analysis of fault history, to correct system/ operation Problems. P P P P

Quote recommended actions. P P P P

an R&D TechnologyGroup Company

PowerhouseSystems

“Strengthening business through partnerships”

Service OutlineService Outline ThermalImaging

reports now included(where applicable)

RDT - Service & workshop Linecard Brochure - 280715

Additional testing & measuring available on request.