power sys operation and control using synchrophasors jan-08

7/23/2019 Power Sys Operation and Control Using Synchrophasors Jan-08

1/5

( )

One Day Workshop onAdvances in Power System Operation and Control using

Synchrophasors (PMUs)This programme is organised by inviting Dr. Anurag K Srivastava, Director of the Smart Grid

Demonstration and Research Investigation Lab, Washington State University, USA, a world

renowned expert in this area. Details are available inside this brochure

08 January, 2016

Organised by Smart Power and Energy System

Power Systems Division Central Power Research Institute

( , ) (Govt. of India Society, Ministry of Power).... , ...8066, Prof. Sir C V Raman Road, PO Box 8066,

, Sadashivanagar Post Office, 560 080, , Bengaluru 560 080, Karnataka, India

www.cpri.in Website: www.cpri.in

Technically Co-sponsored byIEEE India Council Power and Energy Society Chapter


2/5

About the Workshop

To realize the vision of the future smart electric grid, enhancements are required at various levels of

existing power grid operation and control practices including integration of phasor measurement units

(PMUs). PMUs provide synchronized measurements at high rates for enhanced wide area situational

awareness and decision support using new applications. High quality of synchrophasor measurements

is vital for most of these applications, especially for real time control. Implementation of such a system

requires integration of PMUs data for situational awareness, developing new applications for

synchrophasor data utilization, and integration into control center applications. This workshop is

focused on power system engineering aspects of synchrophasor measurements, advancement in

applications and use cases for integration of PMU data in the power grid control center. This workshop

will discuss the basics of PMUs, phasor estimation, need for PMU testing, certification, review of

possible applications, synchrophasors based voltage stability application and existing related

standards. In this workshop, use cases for integration of PMU data into control center operations will be

also discussed. This workshop is highly recommended for electric utility, vendors, technical managers,

smart grid engineers, students and faculty.

TopicsThis workshop provides a forum for discussing the latest findings in PMU Analytics. The topics to be

covered in more depth are the following:

Power System Operation and Control

Basics of PMUs,

Phasor estimation,

Need for PMU testing and certification,

PMU standards and compliance testing

Power System Operation and Control using Synchrophasors

Synchrophasors based voltage stability application

Review of other possible applications

Demo of tools to utilize PMU data

About the Speaker

Dr. Anurag K. Srivastava:

Dr. Anurag K Srivastava is the director of the Smart Grid Demonstration and

Research Investigation Lab (SGDRIL) within the Energy System Innovation Centre

(ESIC) and an associate professor of electric power engineering at Washington

State University. He received his Ph.D. degree in electrical engineering from the

Illinois Institute of Technology in 2005. He has worked as an assistant researchprofessor at Mississippi State University from 2005-2010, as a senior research

associate at the Indian Institute of Technology, Kanpur, India, and as a research

fellow at the Asian Institute of Technology, Bangkok, Thailand. His research

interests include power system operation and control using synchrophasor data.

Dr. Srivastava is a senior member of the IEEE, chair of the IEEE Power & Energy

Societys (PES) student activities committee, co-chair of the micro grid working group, past-chair of the

IEEE PES career promotion subcommittee, and past vice-chair of the IEEE synchrophasor conformity

assessment program. He organized the first workshop on testing and validation of synchrophasors

device testing and applications. He is the recipient of the best paper award from the IEEE Industry

Applications Society and is working closely with a number of electric power companies. Dr. Srivastava

is an associate editor of the IEEE Transactions on Smart Grid, an IEEE distinguished lecturer, and theauthor of more than 150 technical publications including a book on power system security.


3/5

About CPRI

Central Power Research Institute (CPRI) set up in 1960 by the Government of India, functions as a

National organization for applied research in power sector and also serves as an Independent

Laboratory for testing and certification of power equipment. CPRI is a member of STI (Short Circuit

Testing Liaison) of Europe and is accredited by M/s ASTA of UK. CPRI also provides consultancy

services on various facets of power sector. CPRI has expertise in the area of Simulation, Diagnostics,

System Analysis and Testing. CPRI laboratories have modern equipment needed for Power system

simulation, Short circuit testing, Diagnostics of equipment, Materials engineering, Seismic qualificationetc. CPRI has experienced faculty in different subjects of power sector with practical experience in their

areas of interest as well as extensive experience in presenting courses/seminars.

Over the period, CPRI officers have gained lot of practical knowledge concerning to testing and

operational problems of the industry. CPRI is a leading provider of Training and Continuing Education

to Utilities, PSUs across the country for the past 50 years. CPRI is continuously setting new standards

in training and continuing education from basic theoretical information to practical hands-on electrical

equipment training. CPRI courses have made substantial impact on the level of training and education

to India's electricity utilities, manufacturing companies, transmission and distribution companies. By

upgrading the occupational skills of technical workers, CPRI training courses have improved the career

path of many electrical personnel as well as contributed towards improvement in electricity efficiency,

plant productivity, and electrical system reliability and to the overall competitiveness of Indian industry.

About Smart Power & Energy System, Power Systems Division

Smart Power & Energy System (SP&ES) wing of Power Systems Division is doing research and

providing consultancy and system study for Smart Grid, Distribution Automation, SCADA System, Wide

Area Monitoring, Protection and Control (WAMPAC), and power systems for various utilities, industry

and other electrical/power engineering organizations. SP&ES wing is providing the consultancy services

for smart grid and SCADA implementation projects in various distribution companies of Karnataka,

Puducherry, Andhra Pradesh, Telangana to name a few. SP&ES has Substation Automation lab which

is equipped with the facility for Conformance Testing of IEC 61850 server devices. The test facility is

accredited by UCA IUG as Level A (Independent Test Lab with certified ISO 9000 or ISO 17025 Quality

Systems). Certificates issued by CPRI for IEC 61850 conformances are accepted worldwide.

SP&ES also has the facility to do DNP3 testing. Division has state-of-the-art facilities and latest

software tools to offer a wide range of power system simulation services, including real time

performance analysis of various types of controllers such as FACTS, HVDC, SVC and protection relays.

To carry out such studies the division possesses Real Time Digital Simulator (RTDS), RT Lab and

various Power System Analysis Software Packages.

Who should attend?

This programme is designed for utility engineers, manufactures, researchers, consultants, systemintegrators, academia etc. As the seats are limited, registration will be on first cum first serve basis.

Registration

Registration Fee (General): Rs. 5,000+14.5% service tax= Rs. 5,725/- per person

For State Govt. Utilities/State Electricity Boards only(discount of 30% of the total fee with tax)

Rs. 4,008/- per person

For Faculty members of Educational Institutions only:(discount of 30% of the total fee with tax)


For Students only:(discount of 50% of the total fee with tax)


For the other Organisations:Group discount of 10% for minimum 3 participants Rs. 5,153/- per personGroup discount of 20% for 4 or above participants Rs. 4,580/- per person


4/5

The registration fee shall be made in advance by the way of DD drawn in favour of Senior Accounts

Officer, CPRI, Bengaluru, payable at Bengaluru or preferably by wire transfer/RTGS. Other details

can be found in the Registration Form given at the end of this Brochure. Bank transaction charges if

any shall be borne by the respective delegate or organisation. This fee includes delegate kit with course

material, tea/coffee, snacks and lunch during the workshop. As the seats are limited, registration will

be on first come first serve basis. Registration form, complete in all respect shall be sent to the

programme coordinator along with the registration fee. Kindly use separate form for each participant,

downloaded/photo copy of registration form is acceptable.

Date and Venue

The workshop will be held on 08 January, 2016 (Friday) at CPRI, Bengaluru.

Travel and Accommodation

This is a non-residential programme, participants may make their own arrangements for travel and

accommodation. However, accommodation upon request can be arranged at CPRI on payment basis

subject to availability. CPRI is about 32KM from the Kempegowda International Airport and around 8

KM from the Bengaluru City Railway station and City Bus Station.

Details about reaching CPRI is available at http://www.cpri.in/route-map.html

About the Program CoordinatorsDr. Amit Jain, is Joint Director at Power Systems Division at CPRI where he is heading Smart

Power & Energy System group. He is an Electrical Engineer and did his M. Tech. and Ph.D.

from Indian Institute of Technology Delhi. He was postdoctoral researcher at Japan and South

Korea. He has more than 20 years of research, academic and industry experience. His fields of

research interest are smart grid, real time monitoring and control, PMU applications, state

estimation, power system planning and economics, renewable energy, load forecasting, and

artificial intelligence applications. E-mail: [email protected]

James Ranjith Kumar. R, ME (EE) is working as Engineering Officer Gr. 2 in the Power

Systems division of CPRI. He is involved in consultancy services provided by Smart Power &

Energy System group. He has B.E degree in Electrical & Electronics Engg. from AnnaUniversity, Chennai in 2009 and M.E degree in Electrical Engg. from Indian Institute of

Science, Bangalore in 2014. Prior to joining CPRI, he worked in Larsen and Toubro Ltd.,

Coimbatore for two years as a senior engineer in commissioning, operation and maintenance of

Electrical equipments. His fields of research interest are distribution systems, dispersed

generations, load flow, state estimation and fault analysis. Mob.: +9483742567, E-mail:

[email protected]

Registration shall be sent by E-Mail/Fax/Post to

Dr. Amit Jain,Co-ordinator

E-Mail: [email protected]: +91-9902990967

Shri. James Ranjith Kumar. R,Co-ordinator

E-Mail: [email protected]: +91-9483742567

Smart Power & Energy SystemPower Systems Division

Central Power Research Institute(Govt. of India Society, Ministry of Power)Prof. Sir C V Raman Road, PO Box 8066,

Sadashivanagar Post Office,Bengaluru 560 080, Karnataka, India

Phone: 080-2360 2919/2360 2829/2360 1454, Extn: 2446, Fax No.: 080-2360 4461, Website: www.cpri.in


5/5

ENTRALPOWERRESEAR HINSTITUTE

PROF.SIR. VRAMAN ROAD,POBOX 8066,

S

ADASHIVANAGAR

PO,

B

ENGALURU

560 080

REGISTRATION FORM

NE DAY W RKSH P NADVANCES IN P WERSYSTEM PERATI N AND

C

NTR L USING

S

YNCHR PHAS RS

(PMU

S

)

VENUE: CPRI, Bengaluru DATE: January 08, 2016 www.cpri.in

Mr. Ms. Mrs. Dr. Prof. Others (Please Specify)__________________ __

Full Name of the Participant

Designation Nationality

Full address of Organization ________________________________________________________(For Correspondence)

Country: ZIP/PIN Code:

Phone/Fax Nos.: (Please Mention Country & STD Code)

Office: ______________________ ___ Fax:_________________________________

Mobile/Cell: _______________________________ E-mail: _____ _________________

Present area of Responsibility: ______________________ ___

Enclosed is a Demand Draft No: ____________dated _________for Rs. ________ drawn on

____________________________ bank towards delegate fee drawn in favor of Senior

Accounts Officer, CPRI payable at Bengaluru.

Date: _______________

Signature:

Note: Kindly mention your Name, Name of the Company and Name of the conference behind the Demand Draft

I/We came to know about this conference through

If you feel that this conference is of interest to your peers from your organization or other organizations, it is

requested to inform their contact details below and we will be more than happy to contact them.

Sponsors, Company nominations and individuals shall give full details of all the participants in this format.

CANCELLATIONS & SUBSTITUTIONS: Request for cancellations must be received in writing, 7 working days before the workshop to getrefund, with deduction of Rs.1000/- per delegate as handling charges. If the fee has been paid in full, substitutions can be made with prior

intimation at no extra cost. In case this event is cancelled, full refund will be made. CPRI reserves the right to postpone or cancel this event.

Kindly use separate form for each participant, downloaded / photocopies of this registration form is acceptable. Alternatively, registration can be made on line

also.

KINDLY VISIT CPRI WEBSITE FOR REGULAR UPDATES

Completely filled forms & DD shall be sent to:Dr. Amit Jain,Coordinator,Workshop on Advances in Power System Operation and Controlusing Synchrophasors (PMUs)SP&ES, PSD, Central Power Research Institute,Prof. Sir C V Raman Road, PO Box 8066,Sadashivanagar PO, Bengaluru 560080. INDIAMobile: +91-9483742567Fax: +91-80-23601213

Delegates may transfer the fee to:State Bank of IndiaBranch Name: CPRI Branch, BengaluruBeneficiary Name: CPRI, BengaluruSBI A/c No.: 10356553310IFSC code: SBIN0010370

power sys operation and control using synchrophasors jan-08

Documents