power module em.mt04n.3m0

1
NEW POWER MODULE FOR LOW FREQUENCY ULTRASOUND DEVICES WITH CAVITATIONAL EFFECT WITH EMC FILTER FOR AESTHETICAL USE + I2C INTERFACE MODULE EM.MT04N.3M0 CE Certified Ultrasound power generator for 3 Mhz piezoceramic capsules with EM.NI2C22.N00 interface board Technical features: High performance and stability Sine wave capsule piloting Externally digitally interfaceable (+5 Volts ON) for function control Self-functioning through check test to verify functionality independent of external piloting Power output and calibration trim level for every type of capsule Frequency control output for a better performance of the piezoceramic capsule The capsule calibration frequency is also possible by external software through our EM.NI2C2.N00 interface Power output connector RF type BNC Ground system tristate( 3 different modes of mass connection) The module works with all Nuovaray 3 Mhz treatment heads (list provided separately) Power output through RF connector BNC type Adapted for discrete component external control or microcontroller Power input through detachable 5 – pole power connector Modulation control input through our programmed interface EM.NI2C2.N00 with adaptable frequency and Duty between 0….40% and 0…100% Power supply: 16/0/16 Vca; 250 mA; 0/24 Vca-2,5 A -70 VA Transformer available upon request Fast interface I2C BUS Board PWM – 12 C Standard Version Microprocessor interface The simple control functions of EM.NI2C2.N00 interface board must be programmed through external microprocessor on the customer interface by the user of EM.MT04N.3M0 module following the technical information reported on our data sheet. Limited size (mm 1.76 x 1.90,height = 89 mm) auto-radiant shielding alloy chassis. Overall dimensions include BNC ____________________________________________________________________________________________________ NUOVA RAY Srl Via Battindarno, 147/a - 40133 BOLOGNA -Tel. +39 051 56 93 93 - Fax +39 051 61 83 647 - www.nuovaray.it - [email protected] Devices for FITNESS, SPORTS & WEALTH EM.MT04N.3M0 has been built and assembled in compliance with relevant existing regulation: CEI EN 60601 - 2-5: 2000; CEI classification 62-63 – Electromedical appliances-Part 2: Specific safety norms for ultrasound therapy appliances. Document n° TO 703280 A – Job J3419 of 09/04/2007 issued by CELAB Srl (accredited lab). The report is accessible on request at our office.

Upload: nuovaray-srl

Post on 07-Mar-2016

212 views

Category:

Documents


0 download

DESCRIPTION

NEW POWER MODULE FOR LOW FREQUENCY ULTRASOUND DEVICES WITH CAVITATIONAL EFFECT WITH EMC FILTER FOR AESTHETICAL USE + I2C INTERFACE

TRANSCRIPT

Page 1: POWER MODULE EM.MT04N.3M0

NEW POWER MODULE FOR LOW FREQUENCY ULTRASOUND DEVICES WITH

CAVITATIONAL EFFECT WITH EMC FILTER FOR AESTHETICAL USE + I2C INTERFACE

MODULE EM.MT04N.3M0

CE Certified Ultrasound power generator for 3 Mhz piezoceramic capsules with EM.NI2C22.N00 interface board

Technical features:

• High performance and stability

• Sine wave capsule piloting

• Externally digitally interfaceable (+5 Volts ON) for function control

• Self-functioning through check test to verify functionality independent of external piloting

• Power output and calibration trim level for every type of capsule

• Frequency control output for a better performance of the piezoceramic capsule

• The capsule calibration frequency is also possible by external software through our

EM.NI2C2.N00 interface

• Power output connector RF type BNC

• Ground system tristate( 3 different modes of mass connection)

• The module works with all Nuovaray 3 Mhz treatment heads (list provided separately)

• Power output through RF connector BNC type

• Adapted for discrete component external control or microcontroller

• Power input through detachable 5 – pole power connector

• Modulation control input through our programmed interface EM.NI2C2.N00 with adaptable

frequency and Duty between 0….40% and 0…100%

• Power supply: 16/0/16 Vca; 250 mA; 0/24 Vca-2,5 A -70 VA

• Transformer available upon request

• Fast interface I2C BUS

• Board PWM – 12 C Standard Version Microprocessor interface

• The simple control functions of EM.NI2C2.N00 interface board must be programmed through

external microprocessor on the customer interface by the user of EM.MT04N.3M0 module

following the technical information reported on our data sheet.

• Limited size (mm 1.76 x 1.90,height = 89 mm) auto-radiant shielding alloy chassis. Overall

dimensions include BNC

____________________________________________________________________________________________________ NUOVA RAY Srl Via Battindarno, 147/a - 40133 BOLOGNA -Tel. +39 051 56 93 93 - Fax +39 051 61 83 647 - www.nuovaray.it - [email protected]

Devices for

FITNESS, SPORTS & WEALTH

EM.MT04N.3M0 has been built and assembled in compliance with relevant existing regulation: CEI EN 60601 -

2-5: 2000; CEI classification 62-63 – Electromedical appliances-Part 2: Specific safety norms for ultrasound

therapy appliances.

Document n° TO 703280 A – Job J3419 of 09/04/2007 issued by CELAB Srl (accredited lab). The report is

accessible on request at our office.