powder processing equipment - general catalog proces… · ceramic lining specifications enable...
TRANSCRIPT
2011.5
NISSHIN ENGINEERING INC.
HEADQUARTERS14-1 Koami-cho, Nihonbashi, Chuo-ku, Tokyo 103-8544, Japan Tel: +81-3-3660-3425 Fax: +81-3-3660-3845
KAMIFUKUOKA OFFICE5-3-77 Tsurugaoka, Fujimino-City, Saitama 356-0045, Japan Tel: +81-49-264-3049 Fax: +81-49-264-9367
Machinery Sales Division 1 (Inquiry Section) Tel: +81-49-264-3148
Powder Processing Center Tel: +81-49-264-3322 NISSHIN ENGINEERING INC.NISSHIN SEIFUN GROUP
Powder Processing Equipment - General Catalog
Nisshin Engineering provides solutionsfor global needs through powder technology
All equipments that Nisshin Engineering is proud to present to the
world, including the first classifier in the world that can classify sub
micron particles, pulverizers, mixers, feeders and pneumatic conveyors
have functions and structures reflected to satisfy the needs of custom-
ers based on the history and achievement of the powder processing
technologies of Nisshin Seifun Group.
As a leading company in powder processing, Nisshin Engineering pro-
vides high quality and high precision powder instruments to the society
and to the world by utilizing advanced technologies and state-of-the-
art facilities.
・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・
Nisshin Engineering is a leader in developing powder technology and project engineering applied equipments.
FORCED VORTEX TYPE AIR CLASSIFIER
SEMI-FREE VORTEX TYPE CLASSIFIER
JET MILL
POWDER MIXER
MECHANICAL PULVERIZER
CONSTANT POWDER FEEDER
NANO PARTICLES PROCESSING
TOLL POWDER PROCESSING AND MEASUREMENT
4
Turbo Classifier has achieved sub micron level classification for the first time in the world.High quality classification requiring various powders can be accurately and efficiently classified for wide range of cut point (0.5~100μm).
SEMI-FREE VORTEX TYPE CLASSIFIER - AC Series
Strong centrifugal force produced by high speed
vortex promotes highly accurate classification from
sub-micron to single micron particles.
We adapted the twin air system which is the “Secondary air” added at the upper and lower of the classifying zone in addition to the “Main air” which is introduced from the guide vanes. Regulating and accelerating vortex generated by the “Main air” using “Secondary air” achieves high precision classification even in the submicron range.
The cut point is adjusted by changing the ratio of the main air and secondary air. By maintaining the total air volume of the main air and secondary air, it is possible to change the cut point maintaining high precision classification.
The secondary air at the upper zone stimulates dispersion of the material powder sending them to the classification field in a nearly primary particle state.
The secondary air at the lower zone stimulates reclassification. Especially fine particles yield smaller than 3μm is remarkably improved.
Only using compressed and suction air with no moving parts enables high level contamination free operation.
By introducing powder into vortex that gives centrifugal force, powder with light specific gravity can be precisely classified, which is usually difficult to be classified.
S t r o n g d i s p e r s i o n m e c h a n i s m enables sub-micron classification in high accuracy.
High regulating per formance can effectively classify non-spherical particles and scaly shape particles.
Ceramic lining specifications enable high level anti-abrasion performance and contamination free operation.
Simple structure without powder stagnation enables easy disassembly a nd c lea n ing a nd i s su i te d fo r manufacturing of many varieties and small amount products.
H igh d isassembly and c lean ing p e r f o r m a n c e a n d a c c u r a t e reproducibi l i t y is su i ted for the process of medicine, etc.
Fine powder
Coarse powder outlet
Coarse powder collection hopper
Fine powder outlet Raw powder inlet
Classification zone
Secondary air
Secondary air
Main air
Guide vanes
AERO FINE CLASSIFIER
Structural cross section
Specifications
AC-20 Laboratory Unit
Type AC-10
3
FORCED VORTEX TYPE AIR CLASSIFIER - TC Series
Auxiliary bladeClassificationblade
Classificationrotor
Balance rotor Powder inletDispersion blade
Dispersion disc
Coarsepowder outlet
Coarsepowder
FinepowderFinepowder
Scroll casing
Air flow
Raw material
The powder supplied to the material inlet is sucked into the classifier, uniformly dispersed by the dispersion blade and dispersion disc, and fed into the classification zone.Each particle receives centrifugal force generated by the rotor and drag force generated by air flowing toward the center direction. Coarse particles shift to the outside by centrifugal force, fine particles shift to the center side by drag force.
Mult iple dispersion mechanisms increase dispersion of the materials a n d e n a b l e s h i g h l y a c c u r a t e classification.
Cut point is easily adjusted by rotor speed.
Air regulation mechanism based on the turbo theory increases accuracy and efficiency of the classification.
Fine particles recollecting mechanism enables mult ip le c lassi f icat ions resulting in increased fine particle yield and processing capacity.
Feedback control of the rotor speed and air flow rate enables continuous and precise classifying operation.
Compact design enables installation at various sites and promotes high operating performance.
The special operating know-how installed control system provides full automatic operation.
* The special specifications such as anti-abrasive, anti-adhesive and inert gas circulation are also available.
TC-100Ⅳ
TC-100
TC-60
TC-40
TC-25
TC-15
TURBO CLASSIFIER
Specifications
Structural cross section
TC-100Ⅱ
TC-15NS
Air flow
Drag force
Particles' moving direction
Centrifugal force
6
POWDER MIXER Hi-X Series
The Hi-X, achieves high precision and high speed
mixing. This powerful mixer answers various and
difficult requirements for powder mixing application.
Impeller Inlet Rotation axisRotation axis
Control panel
Tilt angle adjustmentwheel
Scraper
Jacket
Outlet
Sphere mixing chamber eliminates powder stagnating dead space.
Heat generation and pulverization level can be controlled by changing the tilt angle of the mixing chamber.
Scraper removes powder adhered to the chamber wall. Mixed powder can be easily discharged by only turning the scraper.
The mixing time can be automatically set by the timer.
The safety device is installed. The equipment is easy to disassemble and clean.
* The jacket structure enables heating or cooling of the powder while mixing.
Mixing degree M (-)
Mixing time t (s)
MIXER Hi-X
Specifications
Experimental result for mixing Corn starch with SiC
Structural cross section
Hi-X200
Hi-X360
The Super Jet Mill achieved very narrow particle size distribution.Simple structure inhibits contamination and enables pulverization into single micron size without heat generation.
5
JET MILL - SJ Series
Contaminat ion-free pulver izat ion is possible because particles are pulverized by the particles' mutual collision and friction with the wall with no moving parts.
Produces “No” heat because it is an adiabatic expansion system. Sui ted for heat sensi t ive powders.
Simple structure enables easy disassembly and cleaning. Suited for manufacturing of many varieties, small amount and pharmaceutical products.
The unique wall structure increases classification to prevent coarse particles to shift to the centering direction. Powder with very narrow ranged size distribution can be obtained.
Cyclone structure can be added to the main body of the pulverizer. It can greatly simplify the whole system.
The ceramics specification enables anti-abrasive and contamination-free operation. (Standard ceramic specifications: SiAlON)Ceramic material such as ZrO2, Al2O3, SiC, etc. can be selected.
Pulverizing nozzle
Classifying zonePulverizing-classifying channel
Pulverized powder outlet
Raw material feeding
Inlet hopper
Ejector
Pulverizing zone Compressed air reservoir
SUPER JET MILL
Structural cross section
Specifications
SJ-500
SJ-100GMP
SJ-10K
“Super Jet Mill” pulverizes powders only by compressed air with no moving parts.Fine powders are produced by mutual collision and friction with the wall using the high speed compressed air injected from the multiple nozzles arranged on the circumference.The regulated air flow prepared through analysis of cyclone air turbulence inside the machine produces particles having narrow particle size distribution with only a limited amount of coarse powder mingled.
7
MECHANICAL PULVERIZER - SR Series - BM Series
Super Rotor is an optimal solution for pulverizing materials such as resin into fine particles. Blade Mill can pulverize elastic and/or fiber materials efficiently. The powerful vortex generated in the narrow gap between the fixed liner and the rotor with a unique groove materializes highly efficient and fine pulverization.
Pulverizedpowder
Material
RotorLiner
Rotor
Liner
Water cooling jacket
Rotational
direction
Super Rotor is equipped with a un ique pulver iz ing rotor, which enables long-term stable and low-cost operation. Fine powder pulverization can be achieved without excessive pulverization. The pulverized par t icle distr ibution is very narrow.
The raw material supplied into the machine passes between the rotor (blade) and liner (the pulverizing zone). The high speed vortex generated by the gap between the rotor (blade) and liner traps and pulverizes the powder. The vortex causes the powder to remain in the pulverizing zone longer and promotes further powder pulverization.
Mean diameter (µm)
Percentage of particles
below 5µm (vol%)
SUPER ROTOR BLADE MILL
Specifications Structural cross section
Coupling system of Classifier TC-15 and Pulverizer SR-15
This system enables pulverization into μm size particles, which used to be the range of Jet mill.
The mechanical pulverizing system provides low running cost pulverization.
Because the system prevents excessive pulverization while powder is pulverized into fine particles, the product with narrow particle size distribution can be produced.
Pulverization specifications which conventionally consisted of two-steps (medium pulverization ⇒ fine pulverization), can be integrated into one process. (several cm ⇒ several μm)
High speed air flow through the machine leaving lit tle residual powder and particle size will be promptly stabilized resulting in a long time stable operation.
Using a cool air generator enables heat sensitive powder pulverization (toner, powder coating, etc.).
The Blade mill with a unique blade structure can pulverize material of the size up to several cm into the size of μm.
The Blade mill is ideal for pulverization of food material, which contains a lot of elastic and/or fiber material.
/
8
CONSTANT POWDER FEEDER
Feedcon-μ can accurately feed small amount of powder constantly and quantitatively.It meets variety of needs for experimental and industrial uses.
Compact design promotes instant and easy usage.
T h e e q u i p m e n t c a n b e e a s i l y disassembled, cleaned and is easy to carry.
Plastic structure installation promotes s t a b l e f e e d o f e v e n a d h e s i v e powders.
The hopper structure receiving low influence from the powder surface level promotes stable powder supply for an extended period of time.
The internal agitator makes stable f e e d o f t h e p o w d e r s w i t h l o w flowability.
The dispersion mechanism at the discharge port reduces pulsatory feed.
* We will respond to other specifications you need.
Dispersion spray feed is available by installing the dispersion unit.
Inert gas atmosphere operation using pressure tight model is available.
Time[min]
Feed rate [g/h]
FEEDCON-μ
Example of powder feed
Specifications
FEEDCON-µType N
FEEDCON-µType M
It is a manual type feeder that is capable of supplying minute quantity of powders from ordinary powders to fine powders having strong adhesive and cohesive characteristics. A unique screw feed mechanism materializes stable powder supply without fluctuation due to changes of powder surface level or pulsatory feed due to screw rotation.
Stable feed-back control of feed rate is done by continuously monitoring the actual weight of feeder by a precision balance. The feeder is operated by a full automatic operation required only by entering the numerical input of the set feed rate. The allotter type for batch feeding or the feeder type for continuous and stable supply can be selected.
BM-25 / SR-25
10
The RF plasma, which the center temperature exceeds 10,000˚C, enables particle production with high purity (high crystalline) properties and high dispersibility.
9
NANO PARTICLES PROCESSING
●WO₃ ●Rare earth metals(Y₂O₃, etc.)●Oxide Composites
●Cu ●Ni ●Si●Alloys (Ag-Pd, Ni-W, etc.)
●TiN ●AIN
For other materials, contact our Powder Processing Center.
●CaS ●ZnS
Oxides Metal
Nitrides
●TiC ●SiC ●ZrC ●NbC
Carbides
●CaF₂ ●MgF₂
Fluorides Sulfide
Metal, ceramic and other particles of several tens of nanometers size can be produced by evaporation and condensation.
By supplying multiple materials to the plasma, composite material can be produced.
The surface modification, surface ox i d a t i o n a n d a l l o y f o r m a t i o n suppress rapid oxidation of metal nanometer size particles.
By controlling the atmosphere and other environmental condit ions, oxides, carbides and nitrides can be produced.
By cont ro l l ing the temperature p a s s i n g t h r o u g h t h e p l a s m a , spheroidized particles is available.
RF PLASMA NANO PARTICLE PROCESSING
Outline of the thermal plasma instrument
Nisshins’ nano particles
Raw material supplied to the thermal plasma, which is generated by the high-frequency magnetic field, is instantly evaporated and then it is condensed as nanometer particles. Because of the vapor phase process in the clean atmosphere, highly purified particles can be produced. Furthermore, our unique technology enables particle production with high dispersibility.
Toll Processing System based on ample experience, advanced technologies and the state-of-the-art facilities.Based on the achievements of powder handling and measurements over the period, Nisshin Engineering undertakes consignment basis pulverization, classification, and characteristics measurement of powder materials requested by the customers. Please make use of our know-how and facilities for your production, research and development of powder products.
Available process
Pulverization type RemarksDescriptions
Jet mill
Mechanicalpulverizer
DescriptionsClassification type
Air classification
Sieving
DescriptionsMeasurement items
Particle size distribution
Powder characteristics
Component analysis
Photograph
■Characteristics measurement
■Pulverization
■Classification
Ni CaF2 TiN
Cu Y2O3 TiC
Ag WO3 Ni-W
DBET : 28nm DBET : 25nmDBET : 50nm
DBET : 11nm DBET : 25nmDBET : 50nm
DBET : 7nm DBET : 50nmDBET : 19nm