MALAYSIAN STANDARDS

2016 / 17 EDITION 1

MS 1539:Part 1 : 2002

PORTABLEFIRE

EXTINGUISHER

About Us:1Eversafe Extinguisher Sdn. Bhd. incorporated in year 1979, a member of Leeden National Oxygen Ltd, Singapore. Our production of fire-fighting equipment is housed within 2.844 acres of manufacturing and R&D facilities which allows us to offer an extensive range of high-quality products and systems.

We aim to be the global leader in the production and marketing of firefighting equipment, systems, and solutions, through the use of innovative design.

Core Values:3

Vision:2

Quality Control:4Manufacturing processs and quality management systems have been approved to BS ISO9001 by British Standard Institution.

Manufacturer/Distributor of:5

Portable and MobileFire ExtinguishersFire Hose ReelsLanding valvesBreeching inletsHydrant

NozzleSmoke AlarmFire BlanketCanvas HoseCabinetsCO2 Fire Extinguishing System

NAF S227 Fire Extinguishing System(FM200 Alternative)NAF S125 Fire Extinguishing SystemKerr Foam CompoundAmerex Restaurant Fire SuppressionSystem

Product Standards/Certification/Directives:6Our products are in compliance with the following product standards/certification bodies:

Australia Standard (SAI Global)European Standard (BSI)Malaysian Standard (SIRIM/IKRAM)Singapore Standard (TϋV SϋD PSB/SETSCO)Construction Product Directive (CPD)(BRE)Pressure Equipment Directive (CE mark) issued by Lloyd's Register,UK

Marine Equipment Directive (Wheel mark) issued by Apragaz, BelgiumOffshore Special Requirement -Sarawak Shell Bhd/Sarawak Shell Petroleum Co (SSB/SSPC)Kuwait National Petroleum Co (KNPC)Kuwait Oil Company (KOC)

a)b)c)d)e)f )

g)

h)

i)j)

In accordance to policy of continuous improvement, specifications are subject to change without notice.1

PRODUCT APPROVALS

Quality First

Safety is Our Priority Provide Solutions Customer Focus

Positive ChangeIntegrity AlwaysTeamwork

EVERSAFECORPORATE PROFILE

(053162-V)EXTINGUISHER SDN. BHD.

range of Fire Extinguisher is certified to various international standards/directives:

Extinguisher FeaturesExtinguisher bodies are fully deep drawn from cold rolled steel, and pressure tested to twice the extinguisher ’s working pressure. Cylinders are externally coated with polyester (with phosphate under treatment) for maximum corrosion resistance and have passed the 480-hours salt spray test.

For extreme environment installations, we recommend the use of our CR (Corrosion Resistant) Fire Extinguishers.

Type of Extinguishant:DryChemicalPowder(ABC)

Dry Chemical Powder (ABC) is a mixture of highly efficient mono-ammonium phosphate and ammonium sulphate ground to selected particle sizes and made resistant to influences of climate extremes by means of hydrophobing agents. It is a versatile and safe extinguishant, and is ideally suited to environment where the fire hazard is mixed. It also offers fast knockdown, protection against reignition and heat reduction. Multipurpose Dry Chemical Powder (ABC) is effective on Class A (carbonaceous) fire, Class B (flammable liquid) fire and Class C (flammable gas) fire. It is also suitable for use on live electrical fires.

Monnex powder is based on potassium bicarbonate-urea complex. Monnex is particularly effective against fire involving alcohols, ketones and esters, which are more difficult for conventional fire fighting agents.Monnex Powder is recommended for high risk situation and should be used when rapid knockdown is required on Class B and C fires. Monnex is particularly suitable for use in refineries, petrochemical complexes and other high hazard areas.

Water, the most commonly used fire extinguishant for Class A fire involving carbonaceous materials such as wood, textiles and paper by cooling the fire and removing the heat needed for combustion.

Filmfoams (AFFF) are synthetic aqueous film forming foam concentrate consisting of fluorocarbon and hydrocarbon surfactants blended with various solvents, preservatives and stabilisers. The foam forms an acqueous film which helps to prevent the release of fuel vapours while the foam blanket from which the film forming liquid drains excludes oxygen from the fuel surface, extinguishing the fire and preventing re-ignition.The water content of the foam provides a cooling effect. The film forming liquid, although heavier, floats on the surface of the fuel, due to its lower surface tension.Effective on B class hydrocarbon fuel fires such as oil, petroleum, aviation fuels, and is particularly suitable where fast fire knockdown is essential. It is compatible with all dry powders. Its excellent wetting characteristics make it useful in combating Class A fire as well.

MonnexPowder

Water

Foam(AFFF)

Carbon Dioxide is the ideal agent for use on Class B (flammable liquids) fires. It is non toxic, non conductive and non corrosive inert gas which works by smothering the flames and reducing the oxygen content of the air around fire. CO2 is safe to use on live electrical fires.

CarbonDioxide(CO2)

Wet Chemical, an aqueous solution, is suitable for use on Class F fire, which involves cooking oils and fats. It reacts with the burning oil or fat forming a 'blanket' which rapidly knocks the flames out, cools the burning oil and chemically reacts to form a soap-free substance, sealing the surface and preventing re-ignition.

WetChemical

In accordance to policy of continuous improvement, specifications are subject to change without notice. 2

• European Standard – BS EN 3 & BS EN 1866• Malaysian Standard – MS 1539• PED (Pressure Equipment Directive)

• Australian Standard – AS/NZS 1841• Singapore Standard – SS EN 3• MED (Marine Equipment Directive)

SELECTION CHART FOR USE OF FIRE EXTINGUISHERS

ClassOf Fire

ABCPowder

BCPowder

MonnexPowder

Water SprayNozzle

SprayFoam

Foam(Branchpipe)

CO2Wet

Chemical

Solidmaterials

Liquids orliquefiable solids

Gases

ElectricalEquipment

Cooking oil

* Safe if in Accidental Contact with Live Electrical Equipment. Complies with Electrical Conductivity Test BS EN 3-7, Clause 9 Annex C.

* *

Descriptions

A

B

C

E

F

Symbol

Portable Fire ExtinguishersAn Introduction To

In accordance to policy of continuous improvement, specifications are subject to change without notice.

Model EC-1 EC-2 EC-3 EC-4 EC-6 EC-9Type Stored Pressure TypeExtinguishant ABC Dry Powder Capacity 1kg 2kg 3kg 4kg 6kg 9kgPropellant Nitrogen (N2)Valve Controllable Non Ferrous Valve with Pressure IndicatorBody Diameter 80mm 110mm 130mm 130mm 158mm 178mmOverall Height 325mm 370mm 425mm 525mm 525mm 590mmApprox Full Weight 1.7kg 3.3kg 4.9kg 6.3kg 9.3kg 12.7kgWorking Temperature Range -20°C to + 60°CWorking Pressure 12 bar (175PSI) Test Pressure 25 bar (362PSI)Burst Pressure Exceeds 69 bar (1000PSI)Approx Discharge Range 2m - 3m 2m - 4m 5m - 6m 5m - 7m 6m - 7m 6m - 7.5mApprox Discharge Time 9 sec 12 sec 14 sec 17 sec 17 sec 20 secFire Rating (min) 5A/21B 8A/34B 13A/55B 13A/70B 27A/144B 27A/144BFire Class A,B,C + Electrial Internal Coating Stoving Epoxy PrimerPaint Finishing RAL 3000 Flame Red Polyester Powder CoatingMounting Plastic Vehicle Bracket Metal 'L' Wall BracketManufactured & Certified to MS 1539 : Part 1 : 2002

3

MS1539:PART 1:2002

EC-9EC-6EC-4 EC-3

EC-2 EC-1

Fully deep drawn from cold rolled steelPressure tested to twice the extinguisher’sworking pressure

Externally coated with polyester powderPassed 480 hours salt spray test

FEATURES

ABC Dry Powder Portable Fire ExtinguisherStored Pressure Type

In accordance to policy of continuous improvement, specifications are subject to change without notice.

Model AF-2Ps AF-9Ps EW-9PsType Stored Pressure TypeExtinguishant AFFF Foam (Premix) WaterCapacity 2 litres 9 litres 9 litresPropellant Nitrogen (N2)Valve Controllable Brass Valve with Pressure IndicatorBody Diameter 110mm 178 mm 178 mm Overall Height 398 mm 625 mm 625 mm Approx Full Weight 3.7 kg 13.6 kg 13.6 kgWorking Temp. Range +5OC to + 60OCWorking Pressure 12 Bar (175 PSI)Test Pressure 25 Bar (362 PSI)Burst Pressure Exceeds 69 Bar (1000 PSI)Approx Discharge Range 2.5 m 6 m 6 mApprox Discharge Time 18 sec 68 sec 75 secFire Rating 5A / 34B 13A / 183B 13AFire Class A + B AInternal Coating Thermoplastic Powder Coating (PPA)Paint Finishing RAL 3000 Flame Red Polyester Powder CoatingMounting Wire Vehicle Bracket Metal 'L' Wall BracketManufactured & Certified to MS 1539 : Part 1: 2002

4

MS1539:PART 1:2002

Fully deep drawn from cold rolled steelPressure tested to twice the extinguisher’s working pressureExternally coated with polyester powderInternally coated with "performance polymer alloy" to prevent corrosionPassed 480 hours salt spray testPassed the 35KV electrical conductivity test to BS EN 3-7, clause 9 Annex C

FEATURES

AF-9Ps

EW-9Ps

AFFF Foam & Water Portable Fire ExtinguisherStored Pressure Type

ECO-11HH

** overall height measured from bottom upto valve handle**

Model ECO-5 ECO-11HHType Stored Pressure TypeExtinguishant Carbon Dioxide (CO2)Capacity 2 kg 5 kgOperating Head / Valve Controllable Chrome Plated Brass ValveCylinder Diameter 114 mm 138mmOverall Height** 510 mm 765 mmApprox Full Weight 7.6 kg 14.8 kgWorking Temp. Range -20OC to +60OCWorking Pressure (20°C) 56 Bar (812 PSI)Test Pressure 250 Bar (3625 PSI)Safety Disc Burst Pressure 180-200 BarApprox Discharge Range 3m 3mApprox Discharge Time 12 sec 16 secFire Rating 21B 55BFire Class B + ElectricalCylinder Specification Steel to ISO 9809Discharge Assembly Swivel Horn Assembly Hose & Horn AssemblyMounting Metal 'L' Wall BracketPaint Finishing RAL 3000 Flame Red Polyester Powder CoatingManufactured & Certified to MS 1539: Part 1 : 2002

5 In accordance to policy of continuous improvement, specifications are subject to change without notice.

ECO-5

MS1539:PART 1:2002

Carbon Dioxide Gas Portable Fire ExtinguisherCarbon Dioxide

In accordance to policy of continuous improvement, specifications are subject to change without notice. 6

Accessories

Body Strap Usage Material Material VehicleBracket Plastic Plastic For 1kg - 2kg

Plastic Vehicle Brackets

Material Usage

‘T’ Wall Bracket Cartridge Operated Type

Chromed Portable Fire Extinguishers

‘L’ Wall Bracket Steel Stored Pressure Fire Extinguishers

BracketsWall Brackets

‘T’ Wall Bracket ‘L’ Wall Bracket

Dry Powder

EP4X-F DescriptionPackaging 25kgStorage Cool and dry place

AFFF Compound & Filmfoam 916 Refill

Foam DescriptionAppearance Clear Colourless LiquidPackaging 0.54L

Monnex Powder

Apparent density 0.75kg / cu dmMoisture content Less than 0.25%Packaging 25kgStorage Cool and dry place

Monnex

Our Global Network

EVERSAFE (053162-V)EXTINGUISHER SDN. BHD.

EVERSAFE® products are available in more than 45 countries worldwide

03 - 8024 9898 03 - 8024 7878 / 9623 www.eversafe.netinfo@eversafe.net / sales@eversafe.net / export@eversafe.net

www.facebook.com/eversafe.extinguisher

Lot 878 Jalan Subang 9, Taman Perindustrian Subang 47500 Subang Jaya, Selangor Darul Ehsan, Malaysia.