ped range pfe&mfe,eversafe

Mobile Fire Extinguishers

Leeden

PRODUCT APPROVALS

1. Parent Company:

We are a member of Leeden group of Companies.

Leeden Limited is a public listed company in Singapore.

2. Corporate Logo:

Our corporate logo reflects our commitment as a progressive and responsible

manufacturer/distributor of products that meet the expectations and requirements of our

clients within the stringent standards stipulated by the Malaysian and international

authorities/bodies.

3. Corporate Development:

Established in 1979, we have since progressed into one of the largest specialist firefighting equipment

manufacturers in Malaysia and Asean region.

4. Manufacturer/Distributor of:

Portable and Mobile Fire Extinguishers Fire Blanket

Fire Hose Reels Canvas hose

Fire Reel Hose Cabinets

Landing valves CO2 Fire Extinguishing System

Breeching inlets NAF S227 Fire Suppression System - UL Listed

Hydrant Croda Foam Compound

Nozzle Kidde range of Fire Suppression System

Smoke Alarm Pyrogen Fire Suppression System

5. Quality Control:

Manufacturing process and quality control systems have been approved to BS ISO9001 by British Standard

Institution

6. Product Standards/Certification:

Our products are in compliance with the following product standards /certification bodies:

a) Australian Standard (SAI Global)

b) European Standard (BSI )

c) Malaysian Standard (SIRIM/IKRAM)

d) Singapore Standard (TUVSUD PSB)

e) Construction Product Directive (CPD) (BRE)

f) Certificate of Fire Approval (issued by Lloyd’s Register, UK)

g) MCA (Maritime and Coastguard Agency) – EC Type Examination (Module B & D Certificate) – Marine

Equipment Directive (Wheel Mark) issued by Lloyd's Register, UK

h) Pressure Equipment Directive (CE mark) issued by Lloyd's Register, UK

i) Offshore Special Requirement - Sarawak Shell Bhd/Sarawak Shell Petroleum Co (SSB/SSPC).

j) Kuwait National Petroleum Co (KNPC)

7. Distribution Networks:

Products are exported to more than 40 countries namely Europe, Australiasia, America, South America, Middle

East, Far East, Asean, Africa and Indian continents.

EVERSAFE EXTINGUISHER SDN. BHD. (053162-V)

CORPORATE PROFILE

In accordance to policy of continuous improvement, specifications are subject to change without notice.

* Safe if in Accidental Contact with Live Electrical Equipment. Complies with Electrical Conductivity Test BS EN 3-7, Clause 9 Annex C.** Definition and designation of classes of fire as per EN 2: 1992.

An Introduction To

Mobile Fire Extinguishers

Dry Powder

(ABC)

Monnex

Powder

Water

Foam

(AFFF)

Wet Chemical

Carbon Dioxide

(CO2)

The range of mobile extinguishers are approved to European Standard BS EN 3: 2007 and BS EN 1866:

2007 respectively, and are manufactured under an ISO 9001 approved Quality System. Mobile extinguishers conformwith requirements of the PED (Pressure Equipment Directive).

Extinguishers are available in a wide range of sizes with ABC dry powder, Monnex powder, AFFF foam, water, carbondioxide and wet chemical. There is a choice of stored pressure models or gas cartridge operated types for ABC powder,Monnex powder, water and AFFF foam extinguishers.

For extreme environment installations, we recommend the use of our CR (Corrosion Resistant) Fire Extinguishers.

Type of Extinguishant:

ABC dry powder is a mixture of highly efficient mono-ammonium phosphate and ammonium sulphate groundto selected particle sizes and made resistant to influences of climate extremes by means of hydrophobingagents. It is a versatile and safe extinguishant, and is ideally suited to environment where the fire hazard ism i x e d . I t a l s o o f f e r s f a s t k n o c k d o w n , p r o t e c t i o n a g a i n s t r e i g n i t i o n a n d h e a t r e d u c t i o n .Multipurpose ABC dry powder is effective on Class A (carbonaceous) fire, Class B (flammable liquid) fire andClass C (flammable gas) fire. It is also suitable for use on live electrical fires.

Monnex powder is based on potassium bicarbonate -urea complex . Monnex is particularly effective againstfire involving alcohols, ketones and esters, which are more difficult for conventional fire fighting agents.Monnex Powder is recommended for high risk situation and should be used when rapid knockdown is requiredon Class B and C fires. Monnex is particularly suitable for use in refineries, petrochemical complexes and otherhigh hazard areas.

Water, the most commonly used fire extinguishant for Class A fire involving carbonaceous materials such aswood, textiles and paper by cooling the fire and removing the heat needed for combustion.

Filmfoams (AFFF) are synthetic aqueous film forming foam liquids consisting of a blend of fluorocarbon andhydrocarbon surfactants blended with various solvents, preservatives and stabilisers.The foam forms anacqueous film which helps to prevent the release of fuel vapours while the foam blanket from which the filmforming liquid drains excludes oxygen from the fuel surface, extinguishing the fire and preventing re-ignition.The water content of the foam provides a cooling effect. The film forming liquid, although heavier, floats onthe surface of the fuel, due to its lower surface tension.Effective on B class hydrocarbon fuel fires such as oil, petroleum, aviation fuels, and is particularly suitablewhere fast fire knockdown is essential. It is compatible with all dry powders. Its excellent wetting characteristicsmake it useful in combating Class A fire as well.

Carbon Dioxide is the ideal agent for use on Class B (flammable liquids) and Class C (flammable gas) fires. Itis non toxic, non conductive and non corrosive inert gas which works by smothering the flames and reducingthe oxygen content of the air around fire. CO2 is safe to use on live electrical fires.

Wet Chemical, an aqueous solution, is suitable for use on Class F fire, which involves cooking oils and fats. Itreacts with the burning oil or fat forming a 'blanket' which rapidly knocks the flames out, cools the burningoil and chemically reacts to form a soap-free substance, sealing the surface and preventing re-ignition.

Water SprayNozzle

Spray

FoamFoam

(Branchpipe)CO2ABC

PowderBC

PowderMetal

PowderMonnexPowderClass of Fire** Wet

Chemical

Solid

materials

Liquids or

liquefiable

solids

Gases

Metals

Electrical

Equipment

Cooking

Oil

Cartridge Operated Type

ABC/Monnex Powder, Water and Foam Portable Fire Extinguishers

In accordance with policy of continuous improvement, specifications are subject to change without notice.

EED-6c EED-9c EED-12c EED-12cMX EEW-6cs EEW-9cs EEF-6cs EEF-9cs EEF-9cEED-4c

The range of portable cartridge operated type fire extinguishers is certified to BS EN3 and ismanufactured under an ISO 9001 approved Quality System. Extinguishers are available in a wide range of sizeswith ABC dry powder, Monnex powder, AFFF foam and water models.

The extinguisher bodies are fully deep drawn from cold rolled steel, and pressure tested to twice theextinguisher's working pressure. Cylinders are externally coated with polyester (with phosphate under treatment)for maximum corrosion resistance and have passed the 480-hour salt spray test. The water and foamextinguishers are internally coated with "performance polymer alloy" to prevent corrosion. Its chrome platedoperating brass headcap is fitted with a safety relief valve.

Dry Powder (ABC) : ABC dry powder extinguisher is effective on Class A (carbonaceous) fire, Class B (flammableliquid) fire and Class C (flammable gas) fire. It is also suitable for use on live electrical fires.

Monnex Powder : Monnex powder extinguisher is recommended for high risk areas where rapid knockdownis required on Class B and C fires. Monnex is particularly suitable for use in refineries, petrochemical complexesand other high hazard areas.

Water : Water extinguisher is used for Class A fire involving carbonaceous materials such as wood, paper andtextiles by cooling the fire and removing the heat needed for combustion. Water spray provides better wettingaction that penetrates underlaying burning materials and assist in reducing heat.

AFFF Foam : AFFF foam extinguisher is effective on B class hydrocarbon fuelfires such as oil, petroleum, aviation fuel, and is particualrly suitable wherefast knockdown is essential. It is compatible with all dry powders. Its excellentwetting characteristic make it useful in combating Class A fire as well.

Technical Specification

Model EED-4c EED-6c EED-9c EED-12c EED-12cMX EEW-6cs EEW-9cs EEF-6cs EEF-9cs EEF-9c

Type Cartridge Operated Type

Extinguishant ABC Dry Powder Monnex Powder Water AFFF Foam

Capacity 4 kg 6 kg 9 kg 12 kg 9 kg 6 litres 9 litres 6 litres 9 litres 9 litres

CO2 Gas Cartridge 75g 110g 150g 225g 225g 55g 55g 55g 75g 75g

Valve / Headcap CE Marked Controllable Chrome Plated Brass Headcap with Safety Relief Valve

Body Diameter 158 mm 158 mm 178 mm 188 mm 188 mm 158 mm 178 mm 158 mm 178 mm 178 mm

Overall Height 468 mm 582 mm 624 mm 697 mm 697 mm 582 mm 624 mm 582 mm 624 mm 624 mm

Approx Full Weight 8.2 kg 10.9 kg 14.7 kg 19.7 kg 16.7 kg 11.1 kg 14.6 kg 11.1 kg 14.9 kg 14.9 kg

Working Temp. Range - 20°C to + 60°C + 5°C to + 60°C

Working Pressure 12 Bar

Test Pressure 25 BAR

Burst Pressure Exceeds 69 Bar

Approx Discharge Range 2 - 3 m 5 m 7 m 7 m 7 m 4 m 6 m 4 m 6 m 6 m

Approx Discharge Time 11 sec 21 sec 23 sec 31 sec 19 sec 32 sec 60 sec 58 sec 88 sec 50 sec

Fire Rating 13A:70B 27A:183B 34A:233B 43A:233B 233B 13A 21A 13A:144B 21A:183B 13A:183B

Fire Class ABC + Electrical BC A + Electrical Safety Test* A, B + Electrical Safety Test* AB

Coating (Internal) Stoving Epoxy Primer Performance Polymer Alloy

Paint Finishing RAL 3000 Flame Red Polyester Powder Coating

Mounting Metal ‘T’ Wall Bracket

Manufactured & Certified to BS EN 3-7: 2004 + A1: 2007 and BS EN 3-8: 2006

* Safe if in Accidental Contact with Live Electrical Equipment. Complies with Electrical Conductivity Test BS EN 3-7, Clause 9 Annex C.

Stored Pressure Type

ABC Dry Powder Portable Fire Extinguishers


EED-1 EED-2 EED-2h EED-3 EED-4N EED-6 EED-9 EED-12

The range of dry powder extinguishers is certified to BS EN 3 and is manufactured under an

ISO 9001 approved Quality System. Extinguishers are available in a wide range of sizes. The cylinders are fully

deep drawn from cold rolled steel, and pressure tested to twice the extinguisher's working pressure. Cylinders

are externally coated with polyester (with phosphate under treatment) for maximum corrosion resistance and

have passed the 480-hour salt spray test.

The range of dry powder extinguishers is charged with specially

fluidised and siliconised mono ammonium phosphate powder which offers

resistance to compaction where the extinguisher is installed in a location

subjected to vibration. It is safe and effective for use on Class A (carbonaceous),

Class B (flammable liquid) and Class C (flammable gas) fires and also suitable

for use on live electrical fires.


Model EED-1 EED-2 EED-2h EED-3 EED-4N EED-6 EED-9 EED-12

Type Stored Pressure Type

Extinguishant ABC Dry Powder

Capacity 1 kg 2 kg 2 kg 3 kg 4 kg 6 kg 9 kg 12 kg

Propellant Dry Nitrogen (N2)

Valve Controllable Chrome Plated Brass Valve with Pressure Indicator

Body Diameter 80 mm 110 mm 110 mm 130 mm 158 mm 158 mm 178 mm 188 mm

Overall Height 332 mm 379 mm 379 mm 477 mm 453 mm 556 mm 602 mm 695 mm

Approx Full Weight 2 kg 3.4 kg 3.6 kg 5.6 kg 7.2 kg 9.7 kg 13.5 kg 18.1 kg

Working Temp. Range - 20°C to + 60°C


Test Pressure 25 Bar


Approx Discharge Range 2 m 2.5 m 2.5 m 4 m 5 m 5 m 7 m 7 m

Approx Discharge Time 9 sec 15 sec 13 sec 14 sec 20 sec 16 sec 18 sec 30 sec

Fire Rating 5A:34B 13A:55B 13A:70B 13A:89B 21A:113B 43A:233B 43A:233B 43A:233B

Fire Class ABC + Electrical

Coating (Internal) Stoving Epoxy Primer


Mounting Plastic Vehicle Bracket * Metal ‘L’ Wall Bracket

Manufactured & Certified to BS EN 3-7: 2004 + A1: 2007 and BS EN 3-8: 2006* Wire vehicle bracket available on request

Stored Pressure Type

AFFF Foam & Water Portable Fire Extinguishers


EED-2s EEF-6s EEF-9s EEW-6s EEW-9s

The range of AFFF foam and water extinguishers are certified to BS EN 3 and are manufactured

under an ISO 9001 approved Quality System. The cylinders are fully deep drawn from cold rolled steel, and

pressure tested to twice the extinguisher's working pressure. Cylinders are externally coated with polyester

(with phosphate under treatment) for maximum corrosion resistance and have passed the 480-hour salt spray

test. The internal of the extinguishers bodies are coated with "performance polymer alloy" to prevent corrosion.

The hot forged brass valve is fitted with pressure indicator. *These extinguishers also passed the 35KV electrical

conductivity test to BS EN 3-7, Clause 9 Annex C.

AFFF Foam: AFFF foam extinguisher is effective on B class hydrocarbon fuel fires such as oil, petroleum, aviation

fuel, and is particualrly suitable where fast knockdown is essential. It is compatible with all dry powders. Its

excellent wetting characteristics make it useful in combating Class A fire as well.

Water: Water extinguisher is used for Class A fire involving carbonaceous

materials such as wood, paper and textiles by cooling the fire and removing

the heat needed for combustion. Water spray provides better wetting

action that penetrates underlaying burning materials and assist in

reducing heat.


Model EEF-2s EEF-6s EEF-9s EEW-6s EEW-9s

Type Stored Pressure Type

Extinguishant AFFF Foam Water

Capacity 2 litres 6 litres 9 litres 6 litres 9 litres

Propellant Dry Nitrogen (N2)

Valve Controllable Chrome Plated Brass Valve with Pressure Indicator

Body Diameter 110 mm 158 mm 178 mm 158 mm 178 mm

Overall Height 398 mm 556 mm 602 mm 556 mm 602 mm

Approx Full Weight 3.7 kg 10.3 kg 13.8 kg 10.2 kg 13.7 kg

Working Temp. Range + 5°C to + 60°C


Test Pressure 25 Bar


Approx Discharge Range 1.5 m 4 m 6 m 4 m 6 m

Approx Discharge Time 26 sec 46 sec 67 sec 34 sec 71 sec

Fire Rating 5A:34B 13A:144B 21A:183B 13A 21A

Fire Class A, B + Electrical Safety Test* A + Electrical Safety Test*

Cylinder Lining Performance Polymer Alloy


Mounting Wire Vehicle Bracket Metal’L’ Wall Bracket

Manufactured & Certified to BS EN 3-7: 2004 + A1: 2007 and BS EN 3-8: 2006* Safe if in Accidental Contact with Live Electrical Equipment. Complies with Electrical Conductivity Test BS EN 3-7, Clause 9 Annex C.

Carbon Dioxide

Portable Fire Extinguishers


The range of carbon dioxide extinguishers is certified to BS EN 3 and is manufactured under an

ISO 9001 approved Quality System. Extinguishers are available in both aluminium alloy (extreme light weight)

and steel (Cromoly) cylinders. The extinguisher are designed to extinguish Class B fire, flamable liquid. CO2 is

non toxic, non conductive and non corrosive inert gas which disperses without leaving any residue after

discharge.

CO2 is safe to use on live electrical fires. CO2 is extensively used throughout

the food industry for its cleanliness in application.

CO2 can burn the skin if extinguisher is held incorrectly during discharging.

We recommend that for safety and effectiveness, all personnel are trained in

the operation of portable fire extinguisher.


Model EEC-2e2 EEC-5e1 EEC-2Ale2 EEC-5Ale1

Body Material Cromoly Steel Aluminum Alloy

Extinguishant Carbon Dioxide

Capacity 2 kg 5 kg 2 kg 5 kg

Cylinder Diameter 105 mm 138 mm 117 mm 152 mm

Overall Height 567 mm 747 mm 502 mm 664 mm

Approx Full Weight 8.2 kg 16 kg 5.1 kg 12.1 kg


Working Pressure (20°C) 56 Bar

Test Pressure 250 Bar 212 Bar

Safety Disc Burst Pressure 180 - 200 Bar

Approx Discharge Range 3 m

Approx Discharge Time 13sec 23 sec 14 sec 18 sec

Fire Rating 34B 55B 34B 55B

Fire Class B, C + Electrical

Cylinder Specification BS 5045 Part 7 BS 5045 Part 8

Discharge Assembly Swivel Horn Hose & Fish Tail Horn Swivel Horn Hose & Fish Tail Horn

Mounting Metal ‘L’ Wall Bracket

Operating Head / Valve CE Marked Controllable Chrome Plated Brass Valve


Manufactured & Certified to BS EN 3-7: 2004 + A1: 2007 and BS EN 3-9: 2006

EEC-2e2 EEC-5e1 EEC-2Ale2 EEC-5Ale1

range of Mobile Dry Powder Fire Extinguishers is certified to BS EN1866 and is manufactured

under an ISO 9001 approved Quality System. It is designed to protect people and property at high risk

areas where the potential for large-scale fire is always present. Mobile units have remarkably greater

extinguishing agent capacities than portable extinguishers, and are highly maneuverable and can be easily

operated by just one person.

Mobile Dry Powder Fire Extinguishers are effective on Class A

(carbonaceous) fire, Class B (flammable liquid) fire and Class C (flammable

gas) fire. It is also suitable for use on live electrical fires. It is recommended

for use in refineries, airports, vessels, chemical plants, offshore platforms,

garages, warehouses, farms and heavy manufacturing areas.

Mobile Dry Powder Fire Extinguishers


MPG-50

MPG-25

MPM-50

MPM-25


Model MPM-25 MPM-50 MPG-25 MPG-50

Type Stored Pressure Type Gas Cartridge Type

Capacity 25kg 50kg 25kg 50kg

Extinguishant ABC Dry Powder

Propellant Nitrogen (N2) Carbon Dioxide (CO2)

Valve / Headcap Brass Valve with Pressure Gauge Brass Head Cap with Safety Relief Valve

CO2 Cartridge N / A 550 grams 1 kg

Discharge Hose 13 mm x 6 m 16 mm x 6 m 13 mm x 6 m 16 mm x 6 m**

Wheel Diameter Ø 300 mm

Frame Work Steel Pipe / Flat Bar

Cylinder Material Steel

Body Diameter 250 mm 386 mm 250 mm 386 mm

Overall Height 895 mm 970 mm 895 mm 970 mm

Width 430 mm 535 mm 430 mm 535 mm

Depth 590 mm 665 mm 590 mm 665 mm

Approx Empty Weight 29 kg 47 kg 33 kg 52 kg

Approx Full Weight 54 kg 97 kg 58 kg 102 kg



Test Pressure 21.5 BAR

Safety Valve Lift Pressure 17 ~ 21 Bar 18 ~ 20 Bar

Approx Discharge Time 40 sec 55 sec 40 sec 50 sec

Approx Discharge Range 9 m 10 m 9 m 11 m

Fire Rating / Class A IB C A IIB C A IB C A IIB C


Manufactured & Certified to BS EN 1866 : 2007

** 10 meter hose length available on request.

range of Mobile AFFF Foam Fire Extinguishers is certified to BS EN 1866 and is manufactured

under an ISO 9001 approved Quality System. It is designed to protect people and property at high risk areas

where the potential for large-scale fire is always present. Mobile units have remarkably greater extinguishing

agent capacities than portable extinguishers, and are highly maneuverable and can be easily operated by

just one person.

Mobile AFFF Foam Fire Extinguishers are effective on B class hydrocarbon fuel fire such as oil,

petroleum, aviation fuel, and is particularly suitable where fast knockdown is essential. AFFF foam is

compatible with all dry powders. Its excellent wetting characteristics make it

useful in combating Class A fire as well. It is recommended for use in refineries,

airports, vessels, chemical plants, offshore platforms, garages, warehouses,

farms and heavy manufacturing areas.

Mobile AFFF Foam Fire Extinguishers


MFM-45

MFM-135

MFG-45

MFG-135MFG-150


Model MFM-45 MFM-135 MFG-45 MFG-135 MFG-150

Type Stored Pressure Type Gas Cartridge Type

Capacity 45 litres 135 litres 45 litres 135 litres 150 litres

Extinguishant AFF Foam (Premix)

Propellant Nitrogen (N2) Carbon Dioxide (CO2)

Valve / Headcap Brass Valve with Pressure Gauge Brass Head Cap with Safety Relief Valve

CO2 Cartridge N / A 1 kg 2 kg 2 kg

Discharge Hose 16 mm x 6 m 19 mm x 6 m 16 mm x 6 m** 19 mm x 6 m** 19 mm x 6 m

Wheel Diameter Ø 300mm 350mm 300 mm 350mm 350mm


Cylinder Material Steel

Body Diameter 386 mm 552 mm 386 mm 552 mm 552 mm

Overall Height 970 mm 1290 mm 970 mm 1290 mm 1380 mm

Width 535 mm 685 mm 535 mm 685 mm 685 mm

Depth 665 mm 930 mm 665 mm 930 mm 930 mm

Approx Empty Weight 46 kg 106 kg 52 kg 113 kg 118 kg

Approx Full Weight 91 kg 241 kg 98 kg 250 kg 270 kg

Working Temp. Range + 5°C to + 60°C


Test Pressure 21.5 Bar 22.5 Bar 21.5 Bar 22.5 Bar 22.5 Bar

Safety Valve Lift Pressure 17 ~ 21 Bar 18 ~ 20 Bar

Approx Discharge Time 105 sec 160 sec 105 sec 160 sec 180 sec

Approx Discharge Range 10 ~ 12 m 11 ~ 13 m 10 ~ 12 m 11 ~ 13 m 11 ~ 13 m

Fire Rating / Class A IIB A IVB A IIB A IVB A IVB

Coating (Internal) High Build Epoxy Tank Coating



** 20 meter hose length available on request.

range of Mobile Carbon Dioxide Fire Extinguishers is certified to BS EN 1866 and is

manufactured under an ISO 9001 approved Quality System. It is designed to protect people and property

at high risk areas where the potential for large-scale fire is always present. Mobile units have remarkably

greater extinguishing agent capacities than portable extinguishers, and are highly maneuverable and can

be easily operated by just one person.

Mobile Carbon Dioxide Fire Extinguishers provide maximum protection against Class B

(flammable liquids) and Class C (flammable gas) fires. CO2 is non-conductive and therefore particularly

effective against fires in electrical plant and equipment. After use, carbon

dioxide disperses without leaving any contamination or corrosive

residue. However, if used in a confined area normal ventilation

procedures should be followed.

Mobile Carbon Dioxide Fire Extinguishers


MCO-10

MCO-10TMCO-20


Model MCO-10 MCO-20 MCO-10T

Capacity 10 kg 20 kg 2 x 10 kg

Style Single Twin

Extinguishant Carbon Dioxide (CO2)

Operating Head CE Marked Brass Screw Down Valve with Safety Relief Valve

Cylinder Thread 1” BS 341

Discharge Hose High Pressure Hose

Internal Diameter x Length 9.5mm x 6 m

Discharge Horn Plastic with On/Off Valve

Cylinder Specification EN1964 Part 1 PED EN1964 Part 1 TPED** EN1964 Part 1 PED

- Diameter Ø 156 mm 204 mm 156 mm

- Nominal height 615 mm 815 mm 615 mm


Overall Height 1020 mm 1210 mm 1040 mm

Width 465 mm 565 mm 515 mm

Depth 1000 mm 1280 mm 1050 mm

Approx Empty Weight 33 kg 80 kg 50 kg

Approx Full Weight 43 kg 100 kg 70 kg

Cylinder / Frame Finish RAL 3000 Flame Red Polyester Powder Coating

Wheel Diameter Ø 300 mm



Cylinder Test Pressure 250 Bar

Approx Discharge Time 30 sec 85 sec 60 sec

Approx Discharge Range 4 m

Fire Rating / Class 70B C 89B C 89B C


** Transportable Pressure Equipment Directive (TPED) approval.

Accessories / Parts


AFFF Foam Refill(FF216)(5 Ltr & 0.9 Ltr)

T Wall Bracketfor Cartridge

Operated PortableFire Extinguisher

Heavy DutyTransport

Bracket

ABC Dry Powderfor use with ABC powder extinguishers

(6kg, 9kg,12kg & 25kg)

L Wall Bracketfor Stored Pressure Portable Fire Extinguisher

Marine Bracket

Brackets areavailable inseveral sizes

VehicleBracket

Metal

Plastic

Brackets are available in several sizes

MONNEX Dry Powder Gas Cartridge (TEPD)

Foam Equipment

Croda FoamCompound

(200 Ltr & 25 Ltr Foam)

TelescopicApplicator

(55g, 75g, 110g, 150g & 225g)

1 kg

2 kg

1 kg

Concentrate

1 kg

2 kg

Wire

ped range pfe&mfe,eversafe

Design