portable cnc cutting machine - fineweld systems extreme...arc voltage height control (avc), torch...
TRANSCRIPT
Portable
PortablePortable・・CNC
1
CNC・Cutting MachineCutting MachineCutting MachineCutting MachineCutting Machine
2
Innovation with KOIKE's high standard Flexibility to your cutting needs
The PNC-12 EXTREME is a whole new innovative
cutting solution developed with KOIKE's highest
standard. It is a perfect machine to enter the world
of CNC cutting. Based on the demands from the
market for a simple, affordable, and versatile CNC
cutting machine, KOIKE designed a machine that is
portable, operated by CNC, and suitable for both oxy-
fuel and plasma cutting.
Due to its compact size and portability, installation of
the machine is easier than ever. Assembly and setup of
all components, such as machine body, rail, and cross
bar do not require any special measuring tools. PNC-
12 EXTREME is pre-adjusted at our factory before
shipping, and besides filtering system and cutting
tables, what customer needs to do at the installation
site is to simply slide in all components together, and
connect cables.
The PNC-12 EXTREME is pre-configured with
different sizes. Koike selected the rail to be made of
robust structured steel, which ensures long lasting
durability under heavy duty working environment.
Cross bar is held with widened linear guide blocks,
stabilizing the torch even when the cross bar is
extended to its maximum length.
The PNC-12 EXTREME can be selected from either oxy-fuel or plasma cutting packages. Oxy-fuel package
comes with an oxy-fuel torch set with integrated
automated piercing sequence program and gas on/off
solenoid valves on all gas lines. Plasma cutting
package comes with Initial Torch Height Sensor (IHS),
arc voltage height control (AVC), torch break away
system, and 35 mm diameter plasma torch holder.
■ Ideal for all customers looking for a simple CNC cutting solution
■ Plug and cut - minimal installation time
■ Easy and simple CNC operation with pre-installed shape templates
■ Suitable for both oxy-fuel and plasma cutting
■ Compatible with most of air plasmas available in today's market
■ Comes standard with CAD/CAM software
3
D420 CNC Controller
The all new KOIKE D420 CNC controller gives easy and flexible CNC experience. 48 Types of most common shapes are
pre-installed in the controller, and for those who would like to customize, parameters can be edited to create special cutting
settings.
KOIKE D420 Controller is equipped with the latest portable CNC control technology, such as automatic piercing
sequence, mirror cutting, angle adjustments, nesting, rotation, and more. Clear and crisp 7-inch color screen displays the
live status of the machine during cutting. Important cutting parameters, such as cutting speed as piercing timer delay,
can be modified easily without exiting from current cutting menu. Together with KOIKE FigDef8 and PNC-CAM, which
enables parts to be created from the scratch for PNC-12 EXTREME, CNC cutting can be achieved in a simple way.
Standard features
Rigid linear guiding system Steel-made longitudinal rail
Sets of extra-wide rigid linear guiding system are
used for both X and Y-axis, mounted firmly onto
the thick fixing plates of the machine body. Together
with KOIKE's precise adjustments during assembly
process, high level of cutting performance is
maintained.
The one of KOIKE's designing goals is to provide
products with long-lasting durability. The PNC-12
EXTREME is not an exception. It comes with a tough
and rigid steel rail, which successfully minimizes
vibrations during cutting, and lasts long in heavy-duty
environment of the welding and cutting.
All PNC
essence
shapes, nesting of parts, and
a
All PNC-12 EXTREME
essence of KOIKE's experience in developing
shapes, nesting of parts, and
☆PNC-CAM2A have
does more to automatically embed cut process expertise into the NC code.
Software module
Supply USB memory
Customer’ s Scope
bundle
12 EXTREME comes with FigDef8/PNC
KOIKE's experience in developing
shapes, nesting of parts, and
CAM2A have Auto nesting & Auto
does more to automatically embed cut process expertise into the NC code.
Software module
Supply USB memory Software and
Instruction manual
s Scope
Operation System
Display
Hard disk
FigDef8/PNC of CAD/
comes with FigDef8/PNC
KOIKE's experience in developing
shapes, nesting of parts, and setting cutting orders can be done at
Auto nesting & Auto
does more to automatically embed cut process expertise into the NC code.
Figure Definition
Nesting
Sequence
Single part cutting
Tools
Others
Software and License
Instruction manual
Operation System
Display
Hard disk
FigDef8/PNCCAD/ CAM Software specialized in
comes with FigDef8/PNC-CAM
KOIKE's experience in developing cutting- oriented NC programming software since
cutting orders can be done at
Auto nesting & Auto Sequence function
does more to automatically embed cut process expertise into the NC code.
Function
Figure Definition
KOIKE 2
Standard Shape Library, about 55 patterns
Auto measuring of
Corner loop for Plasma cutting
DXF and DWG parts convert
Nesting
Auto Nesting for Max. 12 kind shapes.
Automatic combination of same part
Copy of Nesting data for repeat cutting
Gap setting for
Sequence
Automatic
Center piercing for Small circle cutting
Lead
Single part cutting Sequence setting without Nesting operation
Gas cutting
Work report output
License PNC
PDF file and Tutor function in USB memory
Windows 7, 8 or higher version
1,024 X 768 dots (XGA) or bigger
2
4
FigDef8/PNC-CAMoftware specialized in
CAM2A NC programming software as standard. This bundle
oriented NC programming software since
cutting orders can be done at ease.
Sequence functions. Compared to other
does more to automatically embed cut process expertise into the NC code.
Function of PNC-CAM2A
KOIKE 2-Dimension CAD
Standard Shape Library, about 55 patterns
Auto measuring of
Corner loop for Plasma cutting
DXF and DWG parts convert
Auto Nesting for Max. 12 kind shapes.
Automatic combination of same part
Copy of Nesting data for repeat cutting
Gap setting for between each part
Automatic sequence setting
Center piercing for Small circle cutting
Lead-in / out length change
Sequence setting without Nesting operation
Gas cutting and Plasma cutting
Work report output
PNC-CAM2A software, License and Install program in USB memory
PDF file and Tutor function in USB memory
Windows 7, 8 or higher version
1,024 X 768 dots (XGA) or bigger
2 GB or bigger to be used
CAM 2Aoftware specialized in
NC programming software as standard. This bundle
oriented NC programming software since
ease.
. Compared to other
does more to automatically embed cut process expertise into the NC code.
CAM2A
Dimension CAD
Standard Shape Library, about 55 patterns
Auto measuring of lines
Corner loop for Plasma cutting
DXF and DWG parts convert
Auto Nesting for Max. 12 kind shapes.
Automatic combination of same part
Copy of Nesting data for repeat cutting
between each part
sequence setting
Center piercing for Small circle cutting
in / out length change
Sequence setting without Nesting operation
Plasma cutting
Work report output
software, License and Install program in USB memory
PDF file and Tutor function in USB memory
Windows 7, 8 or higher version
1,024 X 768 dots (XGA) or bigger
GB or bigger to be used
2A,
oftware specialized in cutting
NC programming software as standard. This bundle
oriented NC programming software since
. Compared to other products in its class PNC
Standard Shape Library, about 55 patterns
Auto Nesting for Max. 12 kind shapes.
Automatic combination of same part
Copy of Nesting data for repeat cutting
between each part
Center piercing for Small circle cutting
Sequence setting without Nesting operation
software, License and Install program in USB memory
PDF file and Tutor function in USB memory
cutting
NC programming software as standard. This bundle
oriented NC programming software since 1980. Designing of cutting
products in its class PNC
software, License and Install program in USB memory
NC programming software as standard. This bundle has the
Designing of cutting
products in its class PNC-CAM 2A
software, License and Install program in USB memory
Designing of cutting
CAM 2A
5
Cutting tool selection
KOIKE standard model: Option: Cutting tool conversion
Plasma Cutting Package kit: Plasma to Oxy-fuel cutting
In addition to the standard oxy-fuel cutting method,
KOIKE provides a complete plasma cutting package.
Package includes Arc Voltage Torch Height Control
(AVC) and Initial Height Sensor (IHS).
With IHS, the plasma torch can be positioned to a
proper distance from the plate when piercing,
extending consumable life by decreasing the chance
of spatters to adherent onto the tip.
AVC measures arc voltage during cutting and by
operating torch lifter to maintain the same voltage,
correct torch height is maintained throughout the cut.
Especially useful when cutting larger size parts or
when cutting table is not flat from long-time use.
Switching from oxy-fuel to plasma set up is not very
complicated.
KOIKE supplies most of external signal cables with
pre-assembled metal connectors, which saves a lot of
time to perform the modification.
If cutting tool needs to be changed, Conversion
kit is available to modify Plasma cutting
configured machine into Oxy-fuel cutting
configuration.
* Conversion kit: Plasma to Oxy-fuel cutting
PNC-12 EXTREME oxy-
fuel cutting torch
package is equipped with
high-quality KOIKE
cutting torch and
automatic on/off solenoid
valves on all gas lines,
which enables presetting
of the flame and
automatic piercing
sequence. Also, KOIKE
100 series cutting nozzles
are included in the
package.
KOIKE EUROPE B.V.Grote Tocht 19, 1507 CGZaandam HollandTel. : +31-Fax : +31-www.koike
Koike Engineering Germany
Model
Machine body
Plasma cutting
CNC
CAD/CAM
・Optional spe
Oxy-fuel cutting
** Fume collecting system is not included.
*1 Transverse bar
*2 Longitudinal rail
The Rail of PNC
*3 Plasma cutting system is not included
*4 You also can choose
KOIKE EUROPE B.V. Grote Tocht 19, 1507 CGZaandam Holland
-75-612-7227 -75-670-2271
www.koike-europe.com
Koike Engineering Germany
Standard
PNC
Machine body
Transverse bar length
Effective cutting width
Longitudinal
Effective cutting length
Rapid speed
Cutting speed
Supply voltage
Heat shield plate
Plasma cutting
Torch holder
Suitable
Plasma cable hold
Torch height control
Model of CNC
Operation panel
Language
Program input
Control axis
Coordinate range
Program format
Shape
Operation function
CAD/CAM Model
ecification (Cutting tool conversion kit : Plasma to Oxy
fuel cutting
Oxy
Cutting tip
Cutting thickness
** Fume collecting system is not included.
Transverse bar is selectable from 1,900mm, 2,150mm, 2,400mm(
Longitudinal rail is selectable from 2,000mm, 3,000mm, 3,500mm(Effective cutting length: 1,500mm, 2,500mm, 3,000mm).
The Rail of PNC-12 EXTREME is not compatible with the rail of PNC
lasma cutting system is not included
You also can choose Oxy-
Grote Tocht 19, 1507 CG
Koike Engineering Germany
KOIKE ARONSON, INC.(RANSOME)635 West Main Street,Arcade, NY 14009 USATel. : +1-585Fax : +1-585www.koike.com Koike Aronson Biondi
Standard
PNC-12 EXTREME
Transverse bar length
Effective cutting width
Longitudinal rail length
Effective cutting length
Rapid speed
Cutting speed
Supply voltage
Heat shield plate
Torch holder
Suitable plasma system
Plasma cable hold
Torch height control
Model of CNC
Operation panel
Language
Program input
Control axis
Coordinate range
Program format
Shape library
Operation function
Model
(Cutting tool conversion kit : Plasma to Oxy
Oxy-fuel cutting torch
Cutting tip
Cutting thickness
** Fume collecting system is not included.
is selectable from 1,900mm, 2,150mm, 2,400mm(
is selectable from 2,000mm, 3,000mm, 3,500mm(Effective cutting length: 1,500mm, 2,500mm, 3,000mm).
12 EXTREME is not compatible with the rail of PNC
lasma cutting system is not included. Customer
-fuel cutting type
KOIKE ARONSON, INC. (RANSOME) 635 West Main Street, Arcade, NY 14009 USA
585-492-2400 585-457-3517
www.koike.com
Koike Aronson Biondi
Specification of PNC
12 EXTREME
Transverse bar length *1
Effective cutting width
rail length *2
Effective cutting length
Heat shield plate
plasma system
Plasma cable holder
Torch height control *4
Coordinate range
Operation function
(Cutting tool conversion kit : Plasma to Oxy
fuel cutting torch
Cutting thickness
** Fume collecting system is not included.
is selectable from 1,900mm, 2,150mm, 2,400mm(
is selectable from 2,000mm, 3,000mm, 3,500mm(Effective cutting length: 1,500mm, 2,500mm, 3,000mm).
12 EXTREME is not compatible with the rail of PNC
. Customer’s scope of supply.
type without Initial torch Height Sensor(IHS) and Arc Voltage height Control (AVC)
KOIKE KOREA ENGINEERING CO., LTD.1318-26,DaekwngKimchon-City, Kyoung SangbukTel. : +82-54-439Fax : +82-54-439www.koike.co.kr
6
Specification of PNC
2,400mm
1,500mm
3,500mm
3,000mm
4,000mm/min
100mm/min
Single phase, 110V or 220/230V selectable by internal switch
Provided at side of the machine
1 set with motorized torch riser and torch break away mechanism / Diameter 35mm
Non high frequency arc start type plasma systemScope *3 )
Transverse bar hold type
Initial height sensing / Arc voltage torch height control
KOIKE D420
7 inch color LCD graphic display and key pad
English, Japanese, Chinese, French, Spanish, Portuguese, Russian, Korean, Dutch
Manual MDI or by USB stick (up to 16GB)
X / Y 2 axes control
Max. +/- 99,999.999mm
EIA format
48 patterns
Dry run, Reverse, Plate alignment, Mirror, and much more
PNC-CAM 2A
(Cutting tool conversion kit : Plasma to Oxy-fuel cutting)
1 set with motorized torch riser
3 seats KOIKE 100 series tip
Max. cutting thickness is subject to cutting tip size.
is selectable from 1,900mm, 2,150mm, 2,400mm(Effective cutting width
is selectable from 2,000mm, 3,000mm, 3,500mm(Effective cutting length: 1,500mm, 2,500mm, 3,000mm).
12 EXTREME is not compatible with the rail of PNC
s scope of supply.
Initial torch Height Sensor(IHS) and Arc Voltage height Control (AVC)
KOIKE KOREA ENGINEERING CO., LTD.
26,Daekwng-Dong,
Kyoung Sangbuk-Do, Korea 439-3711 439-3713
www.koike.co.kr
Specification of PNC-12 EXTREME
4,000mm/min
100mm/min - 3,000mm/min
Single phase, 110V or 220/230V selectable by internal switch
Provided at side of the machine
1 set with motorized torch riser and torch break awaymechanism / Diameter 35mm
Non high frequency arc start type plasma system
Transverse bar hold type
Initial height sensing / Arc voltage torch height control
KOIKE D420
7 inch color LCD graphic display and key pad
English, Japanese, Chinese, French, Spanish, Portuguese, Russian, Korean, Dutch
Manual MDI or by USB stick (up to 16GB)
X / Y 2 axes control
99,999.999mm
EIA format
patterns
Dry run, Reverse, Plate alignment, Mirror, and much more
CAM 2A
fuel cutting)
with motorized torch riser
3 seats KOIKE 100 series tip
Max. cutting thickness is subject to cutting tip size.
Effective cutting width
is selectable from 2,000mm, 3,000mm, 3,500mm(Effective cutting length: 1,500mm, 2,500mm, 3,000mm).
12 EXTREME is not compatible with the rail of PNC-10 Elite.
Initial torch Height Sensor(IHS) and Arc Voltage height Control (AVC)
KOIKE ENGINEERING TANGSHAN CO., LTD.Xi Chang Road East sideNew&Hi-tech Development Zone, Tang Shan City, Hebei Province, 063020, P.R.ChinaTel. : +86-315-Fax : +86-315-www.koike.cn
12 EXTREME
3,000mm/min
Single phase, 110V or 220/230V selectable by internal switch
Provided at side of the machine and the torch motor
1 set with motorized torch riser and torch break awaymechanism / Diameter 35mm
Non high frequency arc start type plasma system
Initial height sensing / Arc voltage torch height control
7 inch color LCD graphic display and key pad
English, Japanese, Chinese, French, Spanish, Portuguese, Russian, Korean, Dutch
Manual MDI or by USB stick (up to 16GB)
Dry run, Reverse, Plate alignment, Mirror, and much more
with motorized torch riser
3 seats KOIKE 100 series tip
Max. cutting thickness is subject to cutting tip size.
Effective cutting width: 1,000mm, 1,250mm, 1,500mm)
is selectable from 2,000mm, 3,000mm, 3,500mm(Effective cutting length: 1,500mm, 2,500mm, 3,000mm).
Initial torch Height Sensor(IHS) and Arc Voltage height Control (AVC)
KOIKE ENGINEERING TANGSHAN CO., LTD.
Road East side tech Development Zone,
Tang Shan City, Hebei Province, 063020, P.R.China
-317-3111 -317-3222
12 EXTREME
Single phase, 110V or 220/230V selectable by internal switch
and the torch motor
1 set with motorized torch riser and torch break away
Non high frequency arc start type plasma system (Customer
Initial height sensing / Arc voltage torch height control
7 inch color LCD graphic display and key pad
English, Japanese, Chinese, French, Spanish,
Manual MDI or by USB stick (up to 16GB)
Dry run, Reverse, Plate alignment, Mirror, and much more
Max. cutting thickness is subject to cutting tip size.
: 1,000mm, 1,250mm, 1,500mm)
is selectable from 2,000mm, 3,000mm, 3,500mm(Effective cutting length: 1,500mm, 2,500mm, 3,000mm).
Initial torch Height Sensor(IHS) and Arc Voltage height Control (AVC)
tech Development Zone, Tang Shan City, Hebei Province,
Koike Cutt(India) Pvt. LtdNo. 679/2/1 Kuruli, Chakan, Taluka Khed, Off Chakan Pune 410501, Maharashtra, India Tel. : +91Fax : +91www.koike
Single phase, 110V or 220/230V selectable by internal switch
(Customer’s
Initial height sensing / Arc voltage torch height control
Dry run, Reverse, Plate alignment, Mirror, and much more
: 1,000mm, 1,250mm, 1,500mm)
is selectable from 2,000mm, 3,000mm, 3,500mm(Effective cutting length: 1,500mm, 2,500mm, 3,000mm).
Initial torch Height Sensor(IHS) and Arc Voltage height Control (AVC)
Cutt ing & Welding(India) Pvt. Ltd No. 679/2/1 Kuruli, Chakan, Taluka Khed, Off Chakan – Alandi Road, Pune 410501, Maharashtra, India
91-2135-304050 91-2135-304077
www.koike-india.com
ing & Welding
No. 679/2/1 Kuruli, Chakan, Taluka Alandi Road,
Pune 410501, Maharashtra, India