polyethylene mill-pro water pipes & fittings...› polyethylene water pipes & fittings international...
TRANSCRIPT
-
› POLYETHYLENE WATER PIPES & FITTINGS International – ISO / EN
www.mill-pro.com.hk
Mill-Pro
2018 Revision 2
-
Mill-Pro PE Water – ISO / EN | 03
Pipe 11
M10-PIPE 12
M80-PIPE 13
M100 / M100S-PIPE 14 / 15
Moulded F i t t ings 17
STUB FLANGE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 18
STUB FLANGE: LONG SPIGOT BLUE, PE100 SDR11/PN16 18
STUB FLANGE: BUTT WELD SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 19
STUB FLANGE: BUTT WELD SPIGOT BLUE, PE100 SDR11/PN16 19
REDUCER: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 20 / 21
REDUCER: BUTT WELD SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 22
REDUCER: LONG SPIGOT BLUE, PE100 SDR11/PN16 22
END CAP: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 23
END CAP: LONG SPIGOT BLUE, PE100 SDR11/PN16 23
EQUAL TEE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 24
EQUAL TEE: LONG SPIGOT BLUE, PE100 SDR11/PN16 25
REDUCING TEE: LONG SPIGOT BLUE, PE100 SDR11/PN16 25
REDUCING TEE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 26 / 28
MOULDED 11.250 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16 29
MOULDED 22.50 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16 29
MOULDED 45º ELBOW: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 30
MOULDED 450 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16 30
MOULDED 90º ELBOW: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 31
MOULDED 900 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16 31
Fabr icated F i t t ings 33
FABRICATED MITRE BEND: PE100 LONG SPIGOT 34
11.250 SINGLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 35
CONTENTS›
22.50 SINGLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 36
300 SINGLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 37
45O DOUBLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 38
90O TRIPLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 39
SPIGOT FLANGE ADAPTER: BLACK EN1092 PN16 – LONG SPIGOT 40
SPIGOT FLANGE ADAPTER: SLIM / BLACK EN1092 PN16 40
SPIGOT FLANGE ADAPTER: SLIM / BLUE EN1092 PN16 – LONG SPIGOT 41
SPIGOT FLANGE ADAPTER: FULL FACE / BLUE EN1092 PN16 – LONG SPIGOT 41
SHOULDERED ENDS: BLACK, PE100 42
BUTTERFLY VALVE SPACER: BLACK, PE100 43
11O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 44
22O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 44
30O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 45
45O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 45
90O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 46
RESTRAINT FLANGE – AVAILABLE WITH OPTIONAL WATERSTOP 47
Electrofus ion F i t t ings 49
EF COUPLERS BLUE (MB, UB) 50
EF COUPLERS 11º SOCKET-SPIGOT BLUE (WS11) 50
EF COUPLERS 30º & 45º SOCKET-SOCKET BLUE (W30 / W45) 50
EF COUPLERS 90º SOCKET-SOCKET BLUE (W90) 50
EF SPIGOT TEE PIECES (EQUAL & REDUCING) BLUE (TA / TA red) 51
EF TEE PIECES (EQUAL) BLUE (T) 51
EF REDUCERS BLUE (MR) 51
EF PRESSURE TAPPING TEES BLUE (DAA) 51
EF COUPLERS BLACK (MB, UB, AM, KM-XL, REM) 51
EF ELBOWS 11º SOCKET-SPIGOT BLACK (WS11) 51
EF ELBOWS 30º SOCKET-SOCKET BLACK (W30) 52
EF ELBOWS 45º SOCKET-SOCKET BLACK (W45 / W45-XL) 52
-
CONTENTS›
Mill-Pro PE Water – ISO / EN | 05
EF ELBOWS 90º SOCKET-SOCKET BLACK (W90 / W90-XL) 52
EF TEE PIECES REDUCING SPIGOT BLACK (T-red-XL) 52
EF TEE PIECES EQUAL BLACK (T / T-XL) 53
EF REPAIR VACUUM LOADING SADDLES BLACK (RS-XL) 53
EF REPAIR SADDLES BLACK (VSC-TL) TOP LOADING 53
EF SPIGOT VACUUM LOADING SADDLES BLACK (SA-XL) 53
EF REPAIR & REINFORCING SADDLES BLACK (RS / V VS) 53
EF SPIGOT SADDLES BLACK (SA-TL) TOP LOADING 53
EF SPIGOT SADDLES BLACK (SA) 53
Reinert-Ri tz F i t t ings 55
OBLIQUE BRANCH TEES – EQUAL & REDUCING 56
90° TEES – EQUAL & REDUCING 56
PULLING HEAD 56
SHORT FORM END CAPS 56
NON-BURIED FIXING POINT 56
LONGITUDINAL COMPENSATOR 57
INSERTION REPAIR COUPLER 57
DOUBLE COUPLER 57
FLANGE ADAPTER REINOGRIP XL 57
SPIGOT FLANGE ADAPTERS 57
Pushf i t F i t t ings 59
CONNECTERS PE-PE 60
REDUCING CONNECTERS PE-PE 60
MALE TRANSITION THREAD TO PE FITTINGS 60
FEMALE TRANSITION THREAD TO PE FITTINGS 60
STOP END 60
ELBOWS 90º PE-PE 60
EQUAL TEES PE-PE-PE 61
UN-EQUAL TEES PE-PE-PE 61
REPAIR CONNECTORS PE-PE 61
UN-EQUAL TEES PE-PE-THREAD 61
LINERS FOR CLASS 1 CONNECTIONS 61
Flange Connect ions 63
BACKING RING: HD GALV / FBE COATED / PP COATED / 316 STAINLESS EN 1092 PN10 STEEL 63
BACKING RING: HD GALV / FBE COATED / PP COATED / 316 STAINLESS EN 1092 PN16 STEEL 64
BACKING RING: HD GALV / FBE COATED / 316 STAINLESS STEEL ANSI B16.5 CLASS #150 65
Mechanica l Connectors 67
COUPLERS 68
END STOPS 68
FLANGE ADAPTORS 69
REPAIR CLAMPS 69
Tools 71
ASA SADDLE INTAKE COMPRESSION UNIT 72
ELECTROFUSION WELDING MACHINES 72
TL SADDLE OFFTAKE COMPRESSION UNIT 72
CLAMPING & DRILLING UNIT 72
PIPE & SPIGOT END MECHANICAL SCRAPERS 72
SADDLE MECHANICAL SCRAPERS 72
LARGE PIPE MECHANICAL SCRAPERS 73
HYDRAULIC RE-ROUNDING 73
TEMPORARY FLOW SHUT OFF 73
VACUUM CLAMPING UNIT 73
EXTERNAL BUTT WELD DE-BEADER 73
INTERNAL BUTT WELD DE-BEADER 73
SQUEEZE OFF TOOLS 73
Inspect ion & Integr i ty 75
-
Mill-Pro PE Water – ISO / EN | 07
Mill-Pro has a well-established track record in supplying major
engineering projects in Australasia for more than 20 years.
With our sourcing skills and systems developed over the
last 5 years Mill-Pro has assembled a team of water works
professionals across the Asia Pacific region with significant
combined experience in Steel, Ductile Iron and Polyethylene
pipe & fittings to deliver a complete technical & product
pipeline solution to it’s clients.
A major factor in Polyethylene is the low barrier to entry due
to the relatively low capital and operating costs to manufacture
Polyethylene products. This has resulted in many new manufacturers
entering the market and established manufacturers switching to
sourcing materials from low-cost countries. Often such sourcing
lacks proper risk assessment of the suppliers, resins and
designs resulting in compromised product performance.
This is further compounded by Polyethylene’s unique
failure mode, unlike “rigid pipes” (PVC’s, steel, ductile etc.),
polyethylene fails elastically over time rather than immediately,
so defects in product design, manufacture & installation may
not become apparent for weeks, months or years. Depending
on operating conditions, systems can often pass on site
pressure testing, only to fail subsequently.
What’s the solution for designers and end users?
• Development of robust specifications with clear test criteria.
• Testing products using statistical techniques against the
specification to ensure compliance.
The Mill-Pro team has spent more than 15 years advising
local authorities, consultants and Government bodies
throughout the Asia Pacific region on Polyethylene
specifications, helping to create robust specifications &
recommending appropriate testing criteria. This team has been
supplying major projects all across Asia and has built relationships
with global leaders such as FRIATEC of Germany, giving Mill-Pro the
ability to deliver a complete solutions approach to pipeline systems.
INTRODUCTION›
Mill-Pro offers three basic pipe configurations with two resin alternates
STANDARD pipe manufactured from pre-compounded coloured PE100+ certified Bi-Modal resins from world leading suppliers such as Borouge, Borealis, SCG etc., providing slow crack growth resistance up to 1000 hrs when tested in accordance with EN 13479.
EXTREME pipe manufactured from pre-compounded coloured PE100 extreme slow crack growth resistant resins (ESCR or RC), providing slow crack growth resistance up to 8760 hrs when tested in accordance with EN 13479. These resins also provide resistance to failure caused by rock impingement or damage. They are ideal for applications where backfill or bedding material quality is poor or where risk of secondary excavation could leave pipes without designed side support.
Pre-compounded colours are available as co-extruded stripes or indication layer to identify water, sewer, wastewater, re-use water and gas.
Pipe M100 – A single colour 100% solid wall PE 100+ pipe.
Pipe M100S – A single colour 100% solid wall PE 100+ pipe with indication stripes in various colours as required.
Pipe M100 EXTREME – A single colour 100% solid wall ESCR pipe available in colours, Blue, Orange and Black.
Pipe M100S EXTREME – A single colour 100% solid wall ESCR pipe with indication stripes in various colours as required.
Pipe M10 – A two-colour 10% externally coloured jacket identifying the service and providing a damage depth indication. Pipes are extruded using identical base resins for a single homogeneous pipe wall.
Pipe M10 EXTREME – A two-colour 10% externally coloured jacket identifying the service and providing damage depth indication. Both layers are extruded using ESCR resins providing extreme crack resistance.
Pipe M80 – A three-colour pipe comprising a 10% co-extruded indication layer to identify use and providing damage depth indication, 15% internal colour lining providing lighter colours for improved CCTV imaging. Pipes are extruded using identical PE100+ base resins to ensure a single homogeneous pipe.
Pipe M80 EXTREME – A three-colour pipe comprising a 10% co-extruded indication layer to identify use and providing damage depth indication, or external striping AND a 15% internal colour lining providing lighter colours for improved CCTV imaging. Pipes are extruded using identical ESCR resins to ensure a single homogeneous pipe wall.
-
› MOTIVATED – INNOVATIVE›
Manufacturing Mill-Pro manufactures it’s pipe in an exclusive partnership with a world leading manufacturer. Established in 1984 they are a global pioneer in Polyethylene pipe, installing one of the first 1600 OD pipe extrusion lines as early as 1996. With a 248,000m2 manufacturing footprint and capacity of 40,000mt, Mill-Pro provides a full range of polyethylene pressure pipe from 110-2000mm OD.
WarehousingMill-Pro has a comprehensivelystocked PE pipe & fittings warehouse in Hong Kong,ensuring commonly requiredproduct is always available in theshortest possible time frame.
Mill-Pro PE Water – ISO / EN | 09
Sample QR code
Try this link to a typical Mill-Pro MDR for 315 OD SDR 11 M10 pipe
Mill-Pro QR CodesIn 2013 Mill-Pro introduced a world first for Polyethylene pipe: permanently marked QR codes on our PE pipes1
Mill-Pro has always provided traditional 1D bar codes on all our pipe & fittings for material traceability to ISO 12176-4, we have now introduced QR codes permanently marked on the pipe surface at 1m intervals in conjunction with standard pipe marking as an option.
These codes provide instant access to the MDR (Material Data Records) for the item being scanned. This provides not only the assurance that the products you have purchased are genuine Mill-Pro products, but also that products can be audited for pass results directly on site in real time.
Mill-Pro has developed this unique permanent marking system for it’s PE pipes providing a UV, Damage & weather proof solution to pipe marking.
Fittings have traceability and QR codes applied using a permanent adhesive sticker as these products should be sealed and protected from the weather until they are used on site.
QR Codes can be read using any IOS or Android smart phone with a camera2.
Typically devices require a 3rd party bar code scanner app. Mill-Pro recommends either NeoReader3 or QR Reader3.
1 Provided on all pipe sizes 90-800mm OD 2 Higher Resolution cameras in later model devices perform better 3 NeoReader & QR Reader are registered trademarks
-
› PIPE
www.mill-pro.com.hk›
Mill-Pro PE Water – ISO / EN | 11
M10-PIPE 12
M80-PIPE 13
M100 / M100S-PIPE 14 / 15
PIPE RATINGS
Mill-Pro offers a complete Polyethylene pipe range from 20mm to 2000mm from SDR 7.4 (PN25) to SDR 41 (PN4). Calculating the buckling limits for buried pipe requires inputs for factor of safety, expected dynamic & static loads, the soil density and side support provided by compaction during pipe installation.
Mill-Pro provides a free calculation service
for designers & constructors to determine the
required pipe ratings for different applications
including pull forces for directional drilling
dynamic & static earth loadings – contact your
local Mill-Pro office for assistance.
PRODUCT TRACEABILITY
Mill-Pro provides full product traceability on every metre of pipe and fitting carrying our brand. This is achieved on pipe using two rows of printed bar codes permanently marked on the pipe surface at 120º of radial separation as the pipe is being extruded. The one-dimensional bar code contains the resin type, manufacturing facility, date of manufacture, batch number, resin melt flow & type, product type and meterage according to ISO 12176-4.
The bar code meterage indicator changes with each meter of pipe extruded in the batch (1 to 9999m). This number indicates the exact position of manufacture for every meter of pipe or fitting. This is in turn linked to the batch production data for temperature, speed, dimensions checking, resin etc. During installation the bar code on pipes and fitting is read and linked with GIS systems allowing complete end to end traceability from raw materials to as built drawings.
The integrity of traceability requires bar codes
to be automated and applied as pipe is being
extruded.
In addition our inspection process and production records are fully documented and traceable by end users through our unique online QR code traceability program. Every pipe has a QR code at 120º radially at one-metre intervals. The marking is permanent.
MANUFACTURING STANDARDS
Pipe is manufactured in accordance with EN 12201-2 and ISO 4427-2.
-
Mill-Pro PE Water – ISO / EN | 13
M10-PIPE›
PRESSURE RATING PE100 PN 8 PN 10 PN 12.5 PN 16 PN 20Mean Outside Diameter
Mean Outside Diameter Maximum Out-of- Roundness(ovalty)
SDR 21 SDR 17 SDR 13.6 SDR 11 SDR 9
dem em di Kg/m em di Kg/m em di Kg/m em di Kg/m em di Kg/m
DN/OD min max Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean
25 25 25.3 1.2 — — — — — — — — — — — —
32 32 32.3 1.3 — — — — — — — — — — — —
40 40 40.4 1.4 — — — — — — — — — 2.2 35.9 0.2
50 50 50.4 1.4 — — — — — — 2.2 45.9 0.3 2.6 45.0 0.4
63 63 63.4 1.5 — — — — — — 2.6 58.0 0.5 3.2 56.8 0.6
75 75 75.5 1.6 — — — — — — 3.1 69.1 0.7 3.9 67.6 0.8
90 90 90.6 1.8 4.6 81.1 1.2 5.8 78.8 1.5 7.1 76.1 1.8 8.7 72.9 2.1 10.7 68.9 2.6
110 110 110.7 2.2 5.7 99.1 1.8 7.0 96.4 2.2 8.6 93.2 2.6 10.6 89.3 3.2 13.0 84.4 3.8
125 125 125.8 2.5 6.4 112.7 2.3 7.9 109.7 2.8 9.8 105.9 3.4 12.1 101.3 4.1 14.8 95.9 4.9
140 140 140.9 2.8 7.1 126.3 2.9 8.8 122.9 3.5 10.9 118.7 4.3 13.4 113.7 5.1 16.6 107.4 6.2
160 160 161.0 3.2 8.2 144.2 3.7 10.1 140.4 4.6 12.5 135.6 5.6 15.4 129.7 6.7 18.9 122.8 8.0
180 180 181.1 3.6 9.1 162.4 4.7 11.3 158.0 5.8 14.1 152.5 7.1 17.3 146.0 8.5 21.2 138.2 10.2
200 200 201.2 4.0 10.2 180.3 5.8 12.6 175.5 7.1 15.5 169.6 8.6 19.2 162.2 10.5 23.6 153.4 12.6
225 225 226.4 4.5 11.4 202.9 7.4 14.2 197.4 9.0 17.5 190.7 11.0 21.6 182.5 13.3 26.5 172.8 15.9
250 250 251.5 5.0 12.6 225.7 9.0 15.6 219.6 11.1 19.4 212.0 13.5 23.9 203.0 16.3 29.4 192.1 19.6
280 280 281.7 9.8 14.2 252.6 11.4 17.5 245.9 13.9 21.7 237.5 16.9 26.8 227.4 20.5 33.0 215.0 24.6
315 315 316.9 11.1 15.8 284.4 14.3 19.7 276.6 17.6 24.5 267.1 21.5 30.1 255.8 25.9 37.1 241.9 31.1
355 355 357.2 12.5 17.8 320.5 18.1 22.3 311.6 22.4 27.5 301.1 27.2 33.9 288.3 32.9 41.7 272.8 39.5
400 400 402.4 14.0 20.2 360.9 23.1 25.0 351.3 28.3 31.0 339.3 34.5 38.2 324.8 41.8 47.0 307.2 50.2
450 450 452.7 15.6 22.7 406.1 29.3 28.1 395.2 35.8 34.9 381.7 43.7 43.0 365.4 52.9 52.8 345.8 63.4
500 500 503.0 17.5 25.2 451.2 36.1 31.2 439.2 44.2 38.7 424.1 54.0 47.8 406.0 65.3 58.7 384.2 78.3
560 560 563.4 19.6 28.1 505.5 45.2 35.0 491.8 55.5 43.4 475.0 67.7 53.4 454.9 81.8 65.7 430.3 98.2
630 630 633.8 22.1 31.6 568.8 57.1 39.3 553.4 70.1 48.7 534.5 85.6 60.2 511.6 103.7 73.9 484.1 124.3
710 710 716.4 24.9 35.7 641.9 72.8 44.3 624.6 89.3 54.9 603.4 108.9 67.8 577.6 131.9 83.4 546.5 158.2
800 800 807.2 28.0 40.1 723.4 92.3 49.9 703.9 113.2 61.8 680.0 138.2 76.3 651.0 167.3 93.9 615.9 200.8
900 900 908.1 31.5 45.1 813.9 116.8 56.3 791.6 143.7 69.6 764.9 175.0 85.9 732.4 211.7 — — —
1000 1000 1009.0 35.0 50.2 904.2 144.3 62.4 879.8 177.1 76.2 852.1 213.2 94.8 814.9 259.9 — — —
1200 1200 1210.8 42.0 60.2 1085.1 207.6 74.2 1057.1 252.8 92.7 1020.0 310.9 — — — — — —
1400 1400 1412.6 49.0 70.1 1266.2 282.1 86.6 1233.2 344.3 108.1 1190.1 423.0 — — — — — —
1600 1600 1614.4 56.0 80.1 1447.1 368.5 98.9 1409.4 449.6 123.6 1360.1 552.5 — — — — — —
dem: Mean Outside Diameter (mm), em: Mean Wall Thickness (mm), di: Mean Internal Diameter (mm).
The tables above provide standard dimensions according to the EN/ISO standards, however Mill-Pro also specialises in providing custom-manufactured sizes and pressure ratings for specific applications including rehabilitation and slip lining subject to sufficient order quantities.
M80-PIPE›
PRESSURE RATING PE100 PN 8 PN 10 PN 12.5 PN 16 PN 20Mean Outside Diameter
Mean Outside Diameter Maximum Out-of- Roundness(ovalty)
SDR 21 SDR 17 SDR 13.6 SDR 11 SDR 9
dem em di Kg/m em di Kg/m em di Kg/m em di Kg/m em di Kg/m
DN/OD min max Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean
90 90 90.6 1.8 4.6 81.1 1.2 5.8 78.8 1.5 7.1 76.1 1.8 8.7 72.9 2.1 10.7 68.9 2.6
110 110 110.7 2.2 5.7 99.1 1.8 7.0 96.4 2.2 8.6 93.2 2.6 10.6 89.3 3.2 13.0 84.4 3.8
125 125 125.8 2.5 6.4 112.7 2.3 7.9 109.7 2.8 9.8 105.9 3.4 12.1 101.3 4.1 14.8 95.9 4.9
140 140 140.9 2.8 7.1 126.3 2.9 8.8 122.9 3.5 10.9 118.7 4.3 13.4 113.7 5.1 16.6 107.4 6.2
160 160 161.0 3.2 8.2 144.2 3.7 10.1 140.4 4.6 12.5 135.6 5.6 15.4 129.7 6.7 18.9 122.8 8.0
180 180 181.1 3.6 9.1 162.4 4.7 11.3 158.0 5.8 14.1 152.5 7.1 17.3 146.0 8.5 21.2 138.2 10.2
200 200 201.2 4.0 10.2 180.3 5.8 12.6 175.5 7.1 15.5 169.6 8.6 19.2 162.2 10.5 23.6 153.4 12.6
225 225 226.4 4.5 11.4 202.9 7.4 14.2 197.4 9.0 17.5 190.7 11.0 21.6 182.5 13.3 26.5 172.8 15.9
250 250 251.5 5.0 12.6 225.7 9.0 15.6 219.6 11.1 19.4 212.0 13.5 23.9 203.0 16.3 29.4 192.1 19.6
280 280 281.7 9.8 14.2 252.6 11.4 17.5 245.9 13.9 21.7 237.5 16.9 26.8 227.4 20.5 33.0 215.0 24.6
315 315 316.9 11.1 15.8 284.4 14.3 19.7 276.6 17.6 24.5 267.1 21.5 30.1 255.8 25.9 37.1 241.9 31.1
355 355 357.2 12.5 17.8 320.5 18.1 22.3 311.6 22.4 27.5 301.1 27.2 33.9 288.3 32.9 41.7 272.8 39.5
400 400 402.4 14.0 20.2 360.9 23.1 25.0 351.3 28.3 31.0 339.3 34.5 38.2 324.8 41.8 47.0 307.2 50.2
450 450 452.7 15.6 22.7 406.1 29.3 28.1 395.2 35.8 34.9 381.7 43.7 43.0 365.4 52.9 52.8 345.8 63.4
500 500 503.0 17.5 25.2 451.2 36.1 31.2 439.2 44.2 38.7 424.1 54.0 47.8 406.0 65.3 58.7 384.2 78.3
560 560 563.4 19.6 28.1 505.5 45.2 35.0 491.8 55.5 43.4 475.0 67.7 53.4 454.9 81.8 65.7 430.3 98.2
630 630 633.8 22.1 31.6 568.8 57.1 39.3 553.4 70.1 48.7 534.5 85.6 60.2 511.6 103.7 73.9 484.1 124.3
dem: Mean Outside Diameter (mm), em: Mean Wall Thickness (mm), di: Mean Internal Diameter (mm).
The tables above provide standard dimensions according to the EN/ISO standards, however Mill-Pro also specialises in providing custom-manufactured sizes and pressure ratings for specific applications including rehabilitation and slip lining subject to sufficient order quantities.
Pipe M10 – A two-colour 10% externally coloured jacket identifying the service and providing a damage depth indication. Pipes are extruded using identical base resins for a single homogeneous pipe wall.
Pipe M10 EXTREME – A two-colour 10% externally coloured jacket identifying the service and providing damage depth indication. Both layers are extruded using ESCR resins providing extreme crack resistance.
Pipe M80 – A three-colour pipe comprising a 10% co extruded indication layer to identify use and providing damage depth indication, 15% internal colour lining providing lighter colours for improved CCTV imaging.Pipes are extruded using identical PE100+ base resins to ensure a single homogeneous pipe.
Pipe M80 EXTREME – A three-colour pipe comprising a 10% co extruded indication layer to identify use and providing damage depth indication, or external striping AND a 15% internal colour lining providing lighter colours for improved CCTV imaging. Pipes are extruded using identical ESCR resins to ensure a single homogeneous pipe wall.
-
Mill-Pro PE Water – ISO / EN | 15
M100 / M100S-PIPE›
PRESSURE RATING PE80 PN 3.2 PN 4 PN 5 PN 6.3
PRESSURE RATING PE100 PN 4 PN 5 PN 6.4 PN 8Nominal Outside Diameter
Mean Outside Diameter Maximum Out-of- Roundness(ovalty)
SDR 41 SDR 33 SDR 26 SDR 21
dem em di Kg/m em di Kg/m em di Kg/m em di Kg/m
DN/OD min max Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean
20 20 20.3 1.2 — — — — — — — — — — — —
25 25 25.3 1.2 — — — — — — — — — — — —
32 32 32.3 1.3 — — — — — — — — — — — —
40 40 40.4 1.4 — — — — — — — — — 2.2 35.9 0.2
50 50 50.4 1.4 — — — — — — 2.2 45.9 0.3 2.6 45.0 0.4
63 63 63.4 1.5 — — — — — — 2.6 58.0 0.5 3.2 56.8 0.6
75 75 75.5 1.6 — — — — — — 3.1 69.1 0.7 3.9 67.6 0.8
90 90 90.6 1.8 — — — — — — 3.8 82.8 1.0 4.6 81.1 1.2
110 110 110.7 2.2 — — — — — — 4.6 101.2 1.5 5.7 99.1 1.8
125 125 125.8 2.5 — — — — — — 5.1 115.2 1.8 6.4 112.7 2.3
140 140 140.9 2.8 — — — — — — 5.8 129.0 2.3 7.1 126.3 2.9
160 160 161.0 3.2 — — — — — — 6.6 147.3 3.1 8.2 144.2 3.7
180 180 181.1 3.6 — — — — — — 7.3 166.0 3.8 9.1 162.4 4.7
200 200 201.2 4.0 — — — — — — 8.2 184.3 4.7 10.2 180.3 5.8
225 225 226.4 4.5 — — — — — — 9.1 207.5 5.9 11.4 202.9 7.4
250 250 251.5 5.0 — — — — — — 10.2 230.5 7.4 12.6 225.7 9.0
280 280 281.7 9.8 — — — — — — 11.3 258.3 9.2 14.2 252.6 11.4
315 315 316.9 11.1 8.2 299.7 7.6 10.3 295.5 9.4 12.8 290.4 11.7 15.8 284.4 14.3
355 355 357.2 12.5 9.2 337.7 9.6 11.5 333.1 11.9 14.4 327.4 14.8 17.8 320.5 18.1
400 400 402.4 14.0 10.4 380.5 12.2 13.0 375.2 15.2 16.2 368.9 18.7 20.2 360.9 23.1
450 450 452.7 15.6 11.6 428.2 15.4 14.6 422.3 19.2 18.2 415.1 23.7 22.7 406.1 29.3
500 500 503.0 17.5 13.0 475.5 19.1 16.2 469.2 23.6 20.2 461.2 29.2 25.2 451.2 36.1
560 560 563.4 19.6 14.5 532.8 23.8 18.2 525.4 29.7 22.6 516.6 36.6 28.1 505.5 45.2
630 630 633.8 22.1 16.3 599.4 30.2 20.4 591.2 37.5 25.4 581.1 46.4 31.6 568.8 57.1
710 710 716.4 24.9 18.4 676.5 38.4 23.0 667.3 47.7 28.7 655.9 59.1 35.7 641.9 72.8
800 800 807.2 28.0 20.7 762.3 48.7 25.8 752.0 60.5 32.2 739.2 74.9 40.1 723.4 92.3
900 900 908.1 31.5 23.2 857.8 61.5 29.1 846.0 76.6 36.2 831.7 94.7 45.1 813.9 116.8
1000 1000 1009.0 35.0 25.8 952.9 76.1 32.2 940.1 94.4 40.2 924.1 116.8 50.2 904.2 144.3
1200 1200 1210.8 42.0 31.0 1143.5 109.6 38.6 1128.2 135.7 48.3 1108.9 168.3 60.2 1085.1 207.6
1400 1400 1412.6 49.0 36.2 1333.9 149.5 45.1 1316.1 185.0 56.0 1294.4 227.7 70.1 1266.2 282.1
1600 1600 1614.4 56.0 41.4 1524.5 195.2 51.5 1504.2 241.5 64.5 1478.3 299.7 80.1 1447.1 368.5
1800 1800 1811.3 63.0 46.1 1713.5 244.5 57.4 1691.0 302.2 72.8 1660.2 380.0 89.5 1626.7 462.9
2000 2000 2012.5 70.0 51.3 1903.8 302.0 63.7 1879.0 372.7 80.9 1844.6 469.2 100.1 1806.2 574.8
dem: Mean Outside Diameter (mm), em: Mean Wall Thickness (mm), di: Mean Internal Diameter (mm).
The tables above provide standard dimensions according to the EN/ISO standards, however Mill-Pro also specialises in providing custom-manufactured sizes and pressure ratings for specific applications including rehabilitation and slip lining subject to sufficient order quantities.
PE80 PN 8 PN 10 PN 12.5 PN 16 PN 20
PE100 PN 10 PN 12.5 PN 16 PN 20 PN 25Nominal Outside Diameter
SDR 17 SDR 13.6 SDR 11 SDR 9 SDR 7.4
em di Kg/m em di Kg/m em di Kg/m em di Kg/m em di Kg/m
DN/OD Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean Mean
20 — — — — — — 2.2 15.9 0.1 2.5 15.2 0.1 3.2 13.8 0.2
25 — — — 2.2 20.9 0.1 2.5 20.2 0.2 3.2 18.8 0.2 3.3 18.7 0.2
32 2.2 27.9 0.2 2.6 27.0 0.2 3.2 25.8 0.3 3.9 24.5 0.3 4.7 22.8 0.4
40 2.6 35.0 0.3 3.3 33.7 0.4 4.0 32.3 0.4 4.8 30.6 0.5 5.9 28.5 0.6
50 3.2 43.8 0.5 4.0 42.3 0.6 4.9 40.4 0.7 6.0 38.3 0.8 7.3 35.6 0.9
63 4.1 55.1 0.7 5.0 53.2 0.9 6.2 50.9 1.1 7.6 48.1 1.3 9.1 45.0 1.5
75 4.8 65.7 1.0 6.0 63.4 1.2 7.2 60.9 1.5 8.9 57.5 1.8 10.9 53.5 2.1
90 5.8 78.8 1.5 7.1 76.1 1.8 8.7 72.9 2.1 10.7 68.9 2.6 13.0 64.3 3.0
110 7.0 96.4 2.2 8.6 93.2 2.6 10.6 89.3 3.2 13.0 84.4 3.8 16.0 78.5 4.5
125 7.9 109.7 2.8 9.8 105.9 3.4 12.1 101.3 4.1 14.8 95.9 4.9 18.1 89.3 5.8
140 8.8 122.9 3.5 10.9 118.7 4.3 13.4 113.7 5.1 16.6 107.4 6.2 20.3 100.0 7.3
160 10.1 140.4 4.6 12.5 135.6 5.6 15.4 129.7 6.7 18.9 122.8 8.0 23.1 114.4 9.5
180 11.3 158.0 5.8 14.1 152.5 7.1 17.3 146.0 8.5 21.2 138.2 10.2 25.9 128.8 12.1
200 12.6 175.5 7.1 15.5 169.6 8.6 19.2 162.2 10.5 23.6 153.4 12.6 28.8 143.1 14.9
225 14.2 197.4 9.0 17.5 190.7 11.0 21.6 182.5 13.3 26.5 172.8 15.9 32.4 160.9 18.9
250 15.6 219.6 11.1 19.4 212.0 13.5 23.9 203.0 16.3 29.4 192.1 19.6 36.0 178.8 23.3
280 17.5 245.9 13.9 21.7 237.5 16.9 26.8 227.4 20.5 33.0 215.0 24.6 40.3 200.3 29.2
315 19.7 276.6 17.6 24.5 267.1 21.5 30.1 255.8 25.9 37.1 241.9 31.1 45.2 225.6 36.9
355 22.3 311.6 22.4 27.5 301.1 27.2 33.9 288.3 32.9 41.7 272.8 39.5 51.0 254.1 46.9
400 25.0 351.3 28.3 31.0 339.3 34.5 38.2 324.8 41.8 47.0 307.2 50.2 57.4 286.4 59.5
450 28.1 395.2 35.8 34.9 381.7 43.7 43.0 365.4 52.9 52.8 345.8 63.4 64.7 322.1 75.4
500 31.2 439.2 44.2 38.7 424.1 54.0 47.8 406.0 65.3 58.7 384.2 78.3 — — —
560 35.0 491.8 55.5 43.4 475.0 67.7 53.4 454.9 81.8 65.7 430.3 98.2 — — —
630 39.3 553.4 70.1 48.7 534.5 85.6 60.2 511.6 103.7 73.9 484.1 124.3 — — —
710 44.3 624.6 89.3 54.9 603.4 108.9 67.8 577.6 131.9 83.4 546.5 158.2 — — —
800 49.9 703.9 113.2 61.8 680.0 138.2 76.3 651.0 167.3 93.9 615.9 200.8 — — —
900 56.3 791.6 143.7 69.6 764.9 175.0 85.9 732.4 211.7 — — — — — —
1000 62.4 879.8 177.1 76.2 852.1 213.2 94.8 814.9 259.9 — — — — — —
1200 74.2 1057.1 252.8 92.7 1020.0 310.9 — — — — — — — — —
1400 86.6 1233.2 344.3 108.1 1190.1 423.0 — — — — — — — — —
1600 98.9 1409.4 449.6 125.6 1360.1 552.5 — — — — — — — — —
1800 111.2 1583.4 567.7 — — — — — — — — — — — —
2000 123.5 1759.3 700.8 — — — — — — — — — — — —
dem: Mean Outside Diameter (mm), em: Mean Wall Thickness (mm), di: Mean Internal Diameter (mm).
The tables above provide standard dimensions according to the EN/ISO standards, however Mill-Pro also specialises in providing custom-manufactured sizes and pressure ratings for specific applications including rehabilitation and slip lining subject to sufficient order quantities.
-
› MOULDEDFITT INGS
www.mill-pro.com.hk›
Mill-Pro PE Water – ISO / EN | 17
STUB FLANGE: BUTT WELD SPIGOT BLUE, PE100 SDR11/PN16 19
REDUCER: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 20 / 21
REDUCER: BUTT WELD SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 22
REDUCER: LONG SPIGOT BLUE, PE100 SDR11/PN16 22
END CAP: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 23
END CAP: LONG SPIGOT BLUE, PE100 SDR11/PN16 23
EQUAL TEE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 24
EQUAL TEE: LONG SPIGOT BLUE, PE100 SDR11/PN16 25
REDUCING TEE: LONG SPIGOT BLUE, PE100 SDR11/PN16 25
REDUCING TEE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 26 / 28
MOULDED 11.250 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16 29
MOULDED 22.50 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16 29
MOULDED 45º ELBOW: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 30
MOULDED 450 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16 30
MOULDED 90º ELBOW: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 31
MOULDED 900 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16 31
Mill-Pro offers an extensive range of moulded PE 100
Polyethylene pressure fittings from 20mm to 1200mm
in SDR11 (PN16) in blue and black and SDR17 (PN10)
in black.
Mill-Pro’s polyethylene product range is manufactured
from high quality resin such as Borouge HE3490 IM,
according to EN 12201-3 / ISO 4427-3.
Every fitting carrying the Mill-Pro brand is inspected
throughout the production process from raw material
to packaging. Our High volume moulded fittings
generally come from our own production moulds.
Mill-Pro moulded fittings are inspected by our own
expatriate inspectors, who have ‘Eye’s On’ during the
entire production process. We incorporate ultrasonic
void detection equipment using both statistical and
random inspection of fitting dimensions to ensure
compliance with the standards.
The one-dimensional bar code contains the the
following:
resin type, manufacturing facility, date of
manufacture, batch number, resin melt flow &
type, product type and moulding number, all
according to ISO 12176-4. Each fitting is fully
documented and traceable by end users through
our unique online QR code traceability program.
STUB FLANGE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 18
STUB FLANGE: LONG SPIGOT BLUE, PE100 SDR11/PN16 18
STUB FLANGE: BUTT WELD SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10 19
-
Mill-Pro PE Water – ISO / EN | 19
MOULDED FITTINGS›
STUB FLANGE: LONG SPIGOT BLUE, PE100 SDR11/PN16
DN/OD d4 d5 t3 L h1
90 138 105 17 127 40
125 158 130 23 152 48
180 211 185 25 184 50
250 328 283 28 200 53
315 378 333 35 258 60
400 482 427 32 252 72
450 545 470 32 267 72
t3
d5d4
h1L10
DN/OD
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
STUB FLANGE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD d4 d5 t3 L10 h1
20 44 27 7 84 21
25 54 33 9 83 22
32 63 40 10 83 20
40 73 50 12 79 18
50 82 61 12 84 17
63 96 73 14 100 35
75 109 87 15 107 29
90 128 103 17 120 40
110 158 123 20 130 45
125 158 130 20 155 50
140 188 153 25 160 50
160 212 173 23 160 50
180 212 185 25 190 55
200 268 230 25 180 50
225 268 233 30 270 50
250 320 283 32 210 55
280 320 289 35 330 55
315 370 330 35 340 60
355 430 371 38 260 65
400 482 425 38 350 70
450 554 465 45 370 75
500 585 528 50 280 80
t3
d5d4
h1L10
DN/OD
STUB FLANGE: BUTT WELD SPIGOT BLUE, PE100 SDR11/PN16
DN/OD d4 d5 t3 L h1
90 138 105 17 50 28
125 158 132 21 63 31
180 212 185 30 79 69
200 268 232 28 88 38
225 268 235 28 98 43
250 320 285 28 103 43
315 370 329 30 125 45
t3
DN/ODd5d4
h1 L10
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
STUB FLANGE: BUTT WELD SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD d4 d5 t3 L10 h1
63 96 73 14 70 35
75 109 87 15 70 29
90 128 103 17 70 40
110 158 123 20 70 45
125 158 130 20 70 50
140 188 153 25 70 50
160 212 173 23 70 50
180 212 185 25 70 55
200 268 230 25 75 50
225 268 233 30 75 50
250 320 283 32 80 55
280 320 289 35 80 55
315 370 330 35 80 60
355 430 371 38 90 65
400 482 425 38 95 70
450 554 465 45 100 75
500 585 528 50 105 80
560 685 613 55 110 85
630 685 640 60 110 85
710 800 735 60 120 90
800 905 838 60 120 95
900 1005 942 60 120 95
1000 1110 1045 60 120 95
1200 1330 1245 80 180 110
1400 1535 1445 80 180 110
1600 1750 1650 100 200 150
1800 1950 1850 100 200 150
t3
DN/ODd5d4
h1 L10
-
Mill-Pro PE Water – ISO / EN | 21
MOULDED FITTINGS›
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
REDUCER: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD dn/od le1 le2 L8
50 20 56 42 116
50 25 56 42 110
50 32 56 45 110
50 40 56 50 110
63 20 66 55 130
63 25 66 55 130
63 32 66 55 130
63 40 66 55 132
63 50 66 55 132
75 32 76 55 150
75 50 76 55 148
75 63 72 63 144
90 32 88 58 170
90 40 88 60 174
90 50 88 65 174
90 63 88 70 175
90 75 88 70 170
110 40 100 72 195
110 50 100 70 195
110 63 110 75 195
110 75 110 75 195
110 90 100 79 195
125 63 105 75 195
125 75 105 75 195
125 90 105 79 195
125 110 105 82 200
140 90 92 79 224
140 110 102 92 210
160 32 98 70 202
160 50 115 70 215
160 63 115 72 218
160 75 115 73 220
160 90 102 79 220
160 110 110 82 216
160 125 110 87 215
160 140 100 92 215
180 63 110 70 235
180 90 105 79 240
180 110 105 82 227
le1
le2
L8
DN/OD
dn/od
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
REDUCER: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD dn/od le1 le2 L
180 125 105 87 240
180 160 105 98 235
200 63 130 77 260
200 75 130 79 260
200 90 130 85 268
200 110 130 88 260
200 125 130 92 265
200 160 130 105 268
200 180 125 124 265
225 90 *105 79 226
225 110 138 115 285
225 125 138 120 285
225 160 138 120 285
225 180 *105 *90 249
225 200 138 120 285
250 90 *112 79 224
250 110 *129 105 280
250 125 135 100 310
250 160 *129 115 280
250 180 135 110 287
250 200 *129 115 275
250 225 *129 135 315
280 160 *107 *85 257
280 225 *107 *85 245
280 250 *112 *92 254
315 90 *115 79 240
315 110 *115 82 241
315 160 150 115 310
315 180 *115 *100 253
315 200 150 120 310
315 225 150 125 310
315 250 150 130 310
315 280 150 145 315
355 200 *100 *100 270
355 250 170 *125 320
355 280 *100 *100 260
355 315 165 *140 325
400 160 *128 137 305
*NOTE Spigot length is less than the minimum required for long spigot in BS EN 12201-3
DN/OD dn/od le1 le2 L
400 200 *130 138 305
400 250 *130 140 305
400 315 *130 *140 305
400 355 *135 *138 305
450 200 *100 *100 260
450 250 *100 *100 260
450 315 *100 *100 250
450 355 *100 *100 250
450 400 *100 *100 240
500 400 *100 *100 250
500 450 *100 *100 250
560 500 *100 *100 260
630 500 *100 *100 260
710 630 *100 *100 250
800 710 *100 *100 250
-
Mill-Pro PE Water – ISO / EN | 23
MOULDED FITTINGS›
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
REDUCER: LONG SPIGOT BLUE, PE100 SDR11/PN16
DN/OD dn/od le1 le2 L
90 50 79 65 175
125 63 100 70 208
125 90 100 90 211
180 63 110 70 235
180 90 110 90 243
180 125 110 100 243
180 160 210 98 228
250 125 135 100 310
250 180 135 110 287
315 250 160 135 327
END CAP: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD L Le
20 44 42
25 47 45
32 53 50
40 58 54
50 60 55
63 69 63
75 77 70
90 103 94
110 114 103
125 122 110
140 109 95
160 161 145
180 143 125
200 170 150
225 172 150
250 191 166
280 167 139
315 196 165
355 255 220
400 264 224
450 265 220
500 270 220
560 276 *220
630 283 *220
*NOTE Spigot length is less than the minimum required for long spigot in BS EN 12201-3: Table 3
END CAP: LONG SPIGOT BLUE, PE100 SDR11/PN16
DN/OD L Le
32 53 44
50 68 56
63 78 65
90 95 79
125 111 88
180 140 105
250 160 130
315 180 150
L
Le
DN/OD
L
Le
DN/OD
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
REDUCER: BUTT WELD SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD dn/od le1 le2 L8
355 200 46 27 *215
355 225 46 36 135
355 250 46 36 135
355 280 46 36 135
355 315 46 36 135
400 200 48 30 *235
400 225 48 30 *235
400 250 48 37 145
400 280 48 37 145
400 315 48 37 145
400 355 48 37 145
450 280 50 37 155
450 315 50 37 155
450 355 50 37 155
450 400 50 37 155
500 400 52 40 165
500 450 52 40 165
630 400 55 40 185
630 450 55 40 185
630 500 55 40 185
630 560 55 40 185
*NOTE Step reducer with weld
le1
le2
L8
DN/OD
dn/od
-
Mill-Pro PE Water – ISO / EN | 25
EQUAL TEE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD dn/od Z1 Z2 L6 le1 le2
40 40 81 80 162 49 50
50 50 115 113 230 70 70
63 63 120 117 240 70 70
75 75 122 118 243 70 70
90 90 140 140 280 79 79
110 110 150 150 300 82 82
125 125 160 181 320 87 87
140 140 172 182 343 90 92
160 160 198 197 396 98 98
180 180 218 223 436 105 105
200 200 224 225 448 *107 *107
225 225 251 247 502 125 130
250 250 268 285 535 130 130
280 280 301 304 602 139 139
315 315 325 337 650 150 150
355 355 361 350 722 168 165
400 400 364 360 728 145 165
450 450 445 440 890 195 185
500 500 518 500 1036 230 232
560 560 543 545 1085 230 230
630 630 588 600 1175 230 240
*NOTE Spigot length is less than the minimum required for long spigot in BS EN 12201-3: Table 3
MOULDED FITTINGS›
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
le1
le2
z1
z2
L6
DN/OD
dn/od
EQUAL TEE: LONG SPIGOT BLUE, PE100 SDR11/PN16
Dn1 Dn2 z1 z2 L le1 le2
250 250 300 300 600 132 132
315 315 364 364 728 152 152
REDUCING TEE: LONG SPIGOT BLUE, PE100 SDR11/PN16
Dn1 Dn2 z1 z2 L le1 le2
90 50 113.5 113.0 227 79 55
90 63 119.5 121.0 239 79 63
250 90 210.0 242.0 420 132 84
250 125 227.0 250.0 455 132 92
250 180 255.0 268.0 510 132 110
315 90 242.0 286.5 484 152 84
315 125 259.0 294.5 519 152 92
315 180 267.0 312.5 574 152 110
315 250 322.0 337.5 644 152 135
le1
le2
z1
z2
L6
DN/OD
dn/od
L6
le1
le2
z1
z2
DN/OD
dn/od
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
-
Mill-Pro PE Water – ISO / EN | 27
MOULDED FITTINGS›
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
REDUCING TEE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD dn/od Z1 Z2 L6 le1 le2
50 32 115 110 230 80 72
50 40 115 110 230 80 72
63 25 119 118 238 78 50
63 32 119 118 238 78 60
63 40 119 118 238 78 66
63 50 119 118 238 78 69
75 32 121 120 242 90 75
75 40 121 120 242 87 75
75 50 121 120 242 80 70
75 63 121 116 242 75 67
90 32 101 102 202 79 44
90 40 107 107 214 79 49
90 50 114 113 227 79 55
90 63 120 121 239 79 63
90 75 125 128 250 79 70
110 32 109 115 218 82 44
110 40 115 120 230 82 49
110 50 118 126 235 82 55
110 63 125 134 250 82 63
110 75 130 141 260 82 70
110 90 140 150 280 82 79
125 63 130 145 260 87 70
125 75 134 157 267 87 78
125 90 150 165 299 87 80
125 110 160 166 319 87 88
140 110 172 212 343 100 128
140 125 165 167 330 92 87
160 32 140 140 280 98 45
160 40 140 144 280 98 50
160 50 140 150 280 98 56
160 63 145 161 290 98 66
160 75 154 166 308 98 70
160 90 160 176 320 98 80
160 110 120 180 240 98 83
160 125 179 192 357 100 93
160 140 173 186 345 98 92
180 90 169 180 337 107 79
180 110 185 213 370 110 105
180 125 183 191 365 105 87
L6
le1
le2
z1
z2
DN/OD
dn/od
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
REDUCING TEE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD dn/od Z1 Z2 L6 le1 le2
180 140 190 196 380 105 82
180 160 200 202 400 105 98
200 40 156 182 312 113 58
200 50 157 180 314 112 62
200 63 153 175 305 112 63
200 75 179 190 357 112 75
200 90 179 191 358 117 80
200 110 178 195 356 112 *79
200 125 198 215 395 113 69
200 160 212 206 423 112 98
225 90 207 248 413 143 104
225 110 207 235 413 128 100
225 160 205 252 410 110 120
225 180 217 209 433 *95 *86
225 200 207 257 413 *87 130
250 90 200 250 400 135 96
250 110 199 215 398 129 82
250 125 208 242 415 130 87
250 160 227 250 454 130 110
250 180 235 260 470 130 105
250 200 238 260 475 *117 120
250 225 249 270 498 *119 127
280 90 205 235 410 140 79
280 110 215 238 430 140 82
280 160 240 254 480 140 98
280 200 260 268 520 140 112
280 225 267 284 533 139 120
280 250 285 285 570 140 129
315 90 210 267 420 150 79
315 110 220 265 440 150 82
315 125 228 275 455 150 87
315 160 254 278 507 150 98
315 180 255 292 510 150 105
315 200 270 292 540 150 112
315 225 280 305 560 150 120
315 250 290 317 580 150 130
355 160 245 291 490 150 100
355 200 205 305 409 130 120
355 250 310 290 620 *120 *120
*NOTE Spigot length is less than the minimum required for long spigot in BS EN 12201-3: Table 3
L6
le1
le2
z1
z2
DN/OD
dn/od
-
MOULDED 22.50 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16
DN/OD le r z
32 45 16 48
50 56 25 61
63 65 33 71
90 79 45 88
125 87 63 99
180 105 90 123
250 130 125 155
315 150 158 181
MOULDED FITTINGS
Mill-Pro PE Water – ISO / EN | 29
›
REDUCING TEE: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD dn/od Z1 Z2 L6 le1 le2
355 315 310 290 620 *120 *120
400 110 254 256 508 *160 112
400 160 254 366 508 *153 140
400 200 254 360 508 *135 140
400 250 155 260 310 *162 140
400 315 307 352 614 *126 *136
400 355 335 380 670 *130 *150
450 315 POA POA POA POA POA
450 400 POA POA POA POA POA
500 125 POA POA POA POA POA
500 160 POA POA POA POA POA
500 250 POA POA POA POA POA
500 315 POA POA POA POA POA
500 400 POA POA POA POA POA
560 160 358 440 715 128 120
560 250 358 470 715 155 135
560 355 360 555 720 155 135
560 400 POA POA POA POA POA
630 400 POA POA POA POA POA
630 500 POA POA POA POA POA
*NOTE Spigot length is less than the minimum required for long spigot in BS EN 12201-3: Table 3
L6
le1
le2
z1
z2
DN/OD
dn/od
MOULDED 11.250 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16
DN/OD le r z
32 45 16 47
50 56 25 58
63 65 33 68
90 79 45 83
250 130 125 142
315 150 158 166
DN/OD
le
11.25º
Z
r
le
le
22.5º
Z
r
le
DN/OD
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications. Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
-
Mill-Pro PE Water – ISO / EN | 31
MOULDED FITTINGS›
MOULDED 450 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16
DN/OD le r z
250 132 125 158
315 152 158 198
le
le
45º
Z
r
DN/OD
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
MOULDED 45º ELBOW: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD le r Z
63 63 37 83
75 70 44 88
90 79 52 97
110 82 64 108
125 87 73 114
160 98 93 127
180 *100 104 120
200 112 116 147
225 115 131 134
250 129 145 162
280 148 162 200
315 150 183 213
355 *160 206 227
400 *158 232 215
450 *170 261 249
500 *205 290 272
560 *200 325 279
630 *220 365 317
*NOTE Spigot length is less than the minimum required for long spigot in BS EN 12201-3: Table 3
le
le
45º
Z
r
DN/OD
MOULDED 900 ELBOW: LONG SPIGOT BLUE, PE100 SDR11/PN16
DN/OD le r Z
250 130 144 136
315 150 181 187
le
le
90º
Z
r
DN/OD
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
MOULDED 90º ELBOW: LONG SPIGOT BLACK, PE100 SDR11/PN16, SDR17/PN10
DN/OD le r Z
20 41 12 48
25 41 15 55
32 44 19 57
40 49 23 58
50 55 29 71
63 63 37 66
75 72 44 81
90 79 52 87
110 82 64 88
125 95 73 95
140 *85 81 93
160 *92 93 97
180 105 104 115
200 125 116 139
225 135 131 142
250 130 130 140
280 *135 162 142
315 150 189 182.7
355 *155 206 171
400 *145 232 148
450 *180 230 185
500 *210 255 210
560 *210 325 225
630 *210 365 229
*NOTE Spigot length is less than the minimum required for long spigot in BS EN 12201-3: Table 3
le
le
90º
Z
r
DN/OD
-
www.mill-pro.com.hk›
Mill-Pro PE Water – ISO / EN | 33
FABRICATED MITRE BEND: PE100 LONG SPIGOT 34
11.250 SINGLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 35
22.50 SINGLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 36
300 SINGLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 37
45O DOUBLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 38
90O TRIPLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT 39
SPIGOT FLANGE ADAPTER: BLACK EN1092 PN16 – LONG SPIGOT 40
SPIGOT FLANGE ADAPTER: SLIM / BLACK EN1092 PN16 40
SPIGOT FLANGE ADAPTER: SLIM / BLUE EN1092 PN16 – LONG SPIGOT 41
SPIGOT FLANGE ADAPTER: FULL FACE / BLUE EN1092 PN16 – LONG SPIGOT 41
SHOULDERED ENDS: BLACK, PE100 42
BUTTERFLY VALVE SPACER: BLACK, PE100 43
11O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 44
22O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 44
30O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 45
Mill-Pro can provide virtually any Polyethylene
fabricated pressure fitting from 63mm to 2000mm
OD, in any SDR / PN rating from SDR7.4 (PN25)
to SDR41 (PN4).
The Mill-Pro team have more than 20 years
experience in PE fitting design including
calculation and application of de-rating factors
for specific applications to ensure long term
performance.
Mill-Pro’s fabricated fittings are manufactured
from high quality resins such as Borouge and
SCG according to EN 12201-3 / ISO 4427-3
and every fitting carrying the Mill-Pro brand is
inspected throughout the production process
from raw material to packaging.
The one-dimensional bar code contains the resin
type, manufacturing facility, date of manufacture,
batch number, resin melt flow & type, product
type and moulding number according to
ISO 12176-4. Each fitting is fully traceable by
end users through our unique online QR code
traceability program, attached to each fitting
carrying our brand.
The following pages contain a small selection of
standard fittings, however any fitting in any size
can be designed & manufactured to order.
Radius R = 1.5DN – to 4.5DN
suitable for pressure.
r = 1.5DN
r = 2.0DN
r = 2.5DN
› F
AB
RIC
AT
ED
F
ITT
ING
S
45O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 45
90O FORMED SWEPT BEND: (r=1.5DN) BLACK, PE100 SDR11/PN16, SDR17/PN10 46
RESTRAINT FLANGE – AVAILABLE WITH OPTIONAL WATERSTOP 47
-
FABRICATED FITTINGS
Mill-Pro PE Water – ISO / EN | 35
›
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications. Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
FABRICATED MITRE BEND: PE 100 LONG SPIGOT (r=1.5DN & r=2.5DN)
DN/OD le r = 1.5 dn r = 2.5 dn
110 82 165 275
125 88 188 313
140 98 210 350
160 112 240 400
180 126 270 450
200 140 300 500
225 158 338 563
250 175 375 625
280 196 420 700
315 221 473 788
355 249 533 888
400 280 600 1000
450 315 675 1125
500 350 750 1250
560 392 840 1400
630 441 945 1575
710 497 1065 1775
800 560 1200 *2000
900 630 1350 *2250
1000 700 1500 *2500
1200 840 *1800 *3000
1400 980 *2100 *3500
1600 1120 *2400 *4000
*To transport large bore R7 and R10 bends, these may need to be made in sections and joined on site.
Z
le
DN
le
r
Z
22.50
STANDARD BEND
Single Mitre θ: 1º to 30º
Double Mitre θ: 31º to 60º
Triple Mitre θ: 61º to 90º
SWEPT FABRICATED BEND
Single Mitre θ: 1º to 18º
Double Mitre θ: 19º to 36º
Triple Mitre θ: 37º to 54º
Four Mitre θ: 55º to 72º
Five Mitre θ: 73º to 90º
To find dimension ‘z’;
z = le +[r x tan ( θ )]2
r = 1.5DN
r = 2.5DN
11.250 SINGLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT
DN/OD le r z
25 40 38 33
32 45 48 42
40 49 60 52
50 55 75 65
63 63 95 82
75 70 113 98
90 79 135 76
110 82 165 93
125 88 188 106
140 98 210 119
160 112 240 136
180 126 270 153
200 140 300 170
225 158 338 191
250 175 375 212
280 196 420 238
315 221 473 267
355 249 533 301
400 280 600 340
450 315 675 382
500 350 750 425
560 392 840 476
630 441 945 535
710 497 1065 603
800 560 1200 680
900 630 1350 765
1000 700 1500 850
1200 840 1800 1020
1400 980 2100 1190
1600 1120 2400 1360
Available in a full range of SDR & PN ratings
Z
le
DN
le
r
Z
11.250
-
Mill-Pro PE Water – ISO / EN | 37
300 SINGLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT
DN/OD le r z
25 40 38 38
32 45 48 49
40 49 60 62
50 55 75 77
63 63 95 97
75 70 113 116
90 79 135 98
110 82 165 120
125 88 188 136
140 98 210 152
160 112 240 174
180 126 270 196
200 140 300 218
225 158 338 245
250 175 375 273
280 196 420 305
315 221 473 344
355 249 533 387
400 280 600 437
450 315 675 491
500 350 750 546
560 392 840 611
630 441 945 688
710 497 1065 775
800 560 1200 874
900 630 1350 983
1000 700 1500 1092
1200 840 1800 1311
1400 980 2100 1529
1600 1120 2400 1748
Available in a full range of SDR & PN ratings
FABRICATED FITTINGS›
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
22.50 SINGLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT
DN/OD le r z
25 40 38 36
32 45 48 46
40 49 60 58
50 55 75 72
63 63 95 91
75 70 113 108
90 79 135 89
110 82 165 109
125 88 188 124
140 98 210 139
160 112 240 159
180 126 270 179
200 140 300 198
225 158 338 223
250 175 375 248
280 196 420 278
315 221 473 313
355 249 533 353
400 280 600 397
450 315 675 447
500 350 750 497
560 392 840 556
630 441 945 626
710 497 1065 706
800 560 1200 795
900 630 1350 895
1000 700 1500 994
1200 840 1800 1193
1400 980 2100 1392
1600 1120 2400 1591
Available in a full range of SDR & PN ratings
Z
le
DN
le
r
Z
22.50
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
Z
le
DN
le
r
Z
300
-
Mill-Pro PE Water – ISO / EN | 39
FABRICATED FITTINGS›
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
45O DOUBLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT
DN/OD le r z
25 40 38 55
32 45 48 64
40 49 60 73
50 55 75 85
63 63 95 101
75 70 113 115
90 79 135 118
110 82 165 144
125 88 188 164
140 98 210 183
160 112 240 210
180 126 270 236
200 140 300 262
225 158 338 295
250 175 375 328
280 196 420 367
315 221 473 413
355 249 533 465
400 280 600 525
450 315 675 590
500 350 750 656
560 392 840 735
630 441 945 826
710 497 1065 931
800 560 1200 1050
900 630 1350 1181
1000 700 1500 1312
1200 840 1800 1575
1400 980 2100 1837
1600 1120 2400 2100
Available in a full range of SDR & PN ratings
DN
le
le
r
Z
Z
450
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
90O TRIPLE MITRE BEND: BLACK / BLUE, PE100 LONG SPIGOT
DN/OD le r z
25 40 38 78
32 45 48 93
40 49 60 109
50 55 75 130
63 63 95 158
75 70 113 183
90 79 135 214
110 82 165 247
125 88 188 276
140 98 210 308
160 112 240 352
180 126 270 396
200 140 300 440
225 158 338 496
250 175 375 550
280 196 420 616
315 221 473 694
355 249 533 782
400 280 600 880
450 315 675 990
500 350 750 1100
560 392 840 1232
630 441 945 1386
710 497 1065 1562
800 560 1200 1760
900 630 1350 1980
1000 700 1500 2200
1200 840 1800 2640
1400 980 2100 3080
1600 1120 2400 3520
Available in a full range of SDR & PN ratings
DN
le
le
Z
rZ
900
-
Mill-Pro PE Water – ISO / EN | 41
SPIGOT FLANGE ADAPTER: SLIM / BLACK EN1092 PN16
DN/OD Flange DN EN1092
d4 D3 le - LS le - BW t3 L10 - LS L10 - BW L6 - BW
250 200 270 189 135 65 32 230 160
315 250 325 239 160 85 35 264 189
355 300 380 265 180 95 35 292 207
400 350 440 301 200 100 40 323 223
450 350 440 301 210 100 40 358 248
450 400 495 345 210 100 40 339 229
500 450 545 377 230 100 45 372 242
500 400 495 345 210 100 40 364 254
560 450 545 377 230 100 45 402 272
560 500 602 428 250 100 50 407 257
BW: butt weld, LS: long spigot.
Larger and additional sizes and flange patterns available upon request.
Slim design maximises ID for improved flow and allows full sized valves to be used
SPIGOT FLANGE ADAPTER: BLACK EN1092 PN16 – LONG SPIGOT
DN/OD Flange DN EN1092
d4 t3 D3 le L10
125 80 128 17 73 105 303
160 80 128 17 73 102 325
160 100 158 25 101 110 355
180 80 128 17 73 105 223
180 100 158 25 101 105 378
200 150 212 30 146 125 436
225 150 212 30 146 *105 418
250 200 268 30 182 *129 436
280 200 268 30 182 *107 363
315 250 320 35 227 150 481
355 300 370 35 255 165 632
400 350 430 40 287 *135 441
450 400 482 40 324 *100 549
500 450 554 40 364 *100 574
560 500 585 50 405 *100 420
*NOTE Spigot length is less than the minimum required in EN 12201-3 Larger and additional sizes and flange patterns available upon request.
FABRICATED FITTINGS›
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications. Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
d3d4
L10
le
t3
DN/OD
L10
le
t3
d3d4
DN/OD
SPIGOT FLANGE ADAPTER: SLIM / BLUE EN1092 PN16 – LONG SPIGOT
DN/OD Flange DN EN1092
d4 d3 le - LS t3 L10 - LS L6 - BW
250 200 270 189 135 32 230
315 250 325 239 160 35 264
SPIGOT FLANGE ADAPTER: FULL FACE / BLUE EN1092 PN16 – LONG SPIGOT
DN/OD Flange DN EN1092
d4 d3 le t3 L10 t k Holes L6 - BW
250 200 270 202 273 32 331 26 295 12 x 22
315 250 325 255 290 35 364 29 355 12 x 26
L10
le
t3
d3d4
DN/OD
L10
le
t3
t
d3k
d4
DN/OD
-
FABRICATED FITTINGS
Mill-Pro PE Water – ISO / EN | 43
›
SHOULDERED ENDS: BLACK, PE100
PE OD Coupling DS Z
50 2 3/8” 67 60
63 2 3/8” 67 80
75 3 1/2” 97 75
90 3 1/2” 97 75
110 4 1/2” 122 75
125 5 1/2” 149 75
125 6 1/2” 178 75
140 5 1/2” 149 75
140 6 1/2” 178 75
160 6 1/2” 178 75
180 8 5/8” 235 75
200 8 5/8” 235 75
225 8 5/8” 235 75
250 10 3/4” 287 75
280 12 3/4” 338 75
315 12 3/4” 338 75
355 14” 370 80
400 16” 420 100
450 18” 470 100
500 20” 521 100
560 22” 573 100
630 26” 673 100
710 28” 724 100
DS
Z
DN
BUTTERFLY VALVE SPACER: BLACK, PE100 SDR11/PE16
SDR Butterfly Valve - NB
PE DN OD ID A ID BA C d Angle L6 - BW
11 100 110 160 89 99 14 20
11 125 125 192 102 125 25 25
11 150 160 213 130 153 25 25
11 200 200 270 163 206 40 28
11 200 225 270 183 206 25 25
11 250 250 334 203 262 50 30
11 250 280 334 228 262 30 30
11 300 315 380 256 325 60 30
11 350 355 444 289 358 60 30
11 400 400 495 325 418 100 25
11 450 450 545 366 459 100 25
11 500 500 602 407 500 100 25
11 600 630 708 545 608 55 30
A
B
OD
D°
C
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications. Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
-
› FABRICATED FITTINGS
Mill-Pro PE Water – ISO / EN | 45
22º FORMED SWEPT BENDS: PE100 SDR11 / PE16-SDR17 / PN10 (r=1.5DN)
DN/OD le r Z
90 136 135 220
110 150 165 209
125 156 188 233
140 181 210 263
160 180 240 292
180 194 270 327
200 253 300 374
225 269 338 416
250 320 375 468
280 314 420 512
315 377 473 583
355 383 533 645
400 380 600 711
450 340 *900 1032
500 564 *1000 1219
*r=2DN
Minimum outside wall thickness is ≥0.93 x emin in accordance with DVS 2210-1.
Z
r
le
minimum ≥0.93
DN/OD
r = 2.0DN
r = 1.5DN
30º FORMED SWEPT BENDS: PE100 SDR11 / PE16-SDR17 / PN10 (r=1.5DN)
DN/OD le r Z
90 129 135 220
110 130 165 230
125 150 188 260
140 171 210 300
160 180 240 300
180 180 270 330
200 238 300 420
225 252 338 450
250 301 375 530
280 292 420 530
315 366 473 650
355 355 533 650
400 370 600 690
450 342 *900 730
500 582 *1000 1100
*r=2DN
Minimum outside wall thickness is ≥0.93 x emin in accordance with DVS 2210-1.
Z
r
le
minimum ≥0.93
DN/OD
r = 2.0DN
r = 1.5DN
45º FORMED SWEPT BENDS: PE100 SDR11 / PE16-SDR17 / PN10 (r=1.5DN)
DN/OD le r Z
90 100 135 220
110 150 165 258
125 150 188 281
140 150 210 303
160 180 240 352
180 188 270 387
200 214 300 433
225 252 338 495
250 262 375 538
280 263 420 583
315 318 473 671
355 301 533 720
400 337 600 809
450 320 *900 1165
500 480 *1000 1398
*r=2DN
Minimum outside wall thickness is ≥0.93 x emin in accordance with DVS 2210-1.
r = 1.5DN
r = 2.0DN
Z
r
le
minimum ≥0.93
DN/OD
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications. Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
11º FORMED SWEPT BENDS: PE100 SDR11 / PE16-SDR17 / PN10 (r=1.5DN)
DN/OD le r Z
90 145 135 220
110 150 165 187
125 169 188 212
140 196 210 238
160 194 240 268
180 213 270 301
200 274 300 340
225 292 338 380
250 346 375 425
280 343 420 470
315 409 473 532
355 419 533 594
400 422 600 661
450 401 *900 977
500 633 *1000 1122
*r=2DN
Minimum outside wall thickness is ≥0.93 x emin in accordance with DVS 2210-1.
Z
r
le
minimum ≥0.93
DN/OD
r = 1.5DN
r = 2.0DN
-
FABRICATED FITTINGS
Mill-Pro PE Water – ISO / EN | 47
›
RESTRAINT FLANGE – AVAILABLE WITH OPTIONAL WATERSTOP
PIPE OD ≤ SDR* Restraint width
Restraint OD
Long spigot / Butt weld
length
Long spigot / XL
length
DN/OD SDR (t) W d2 Z1 Z1
110 11 13 136 158 621
125 11 15 154 167 632
140 11 16 173 174 640
160 11 19 198 186 655
180 11 21 222 197 668
200 11 23 247 208 681
225 11 26 278 222 698
250 11 29 308 263 1217
280 11 32 345 278 1235
315 11 36 388 293 1250
355 11 41 438 313 1270
400 11 46 493 333 1290
450 11 52 555 354 1311
500 11 57 616 379 1336
560 11 64 690 406 1363
630 11 72 776 434 1391
710 17 53 824 442 1399
800 17 59 929 478 1435
900 17 67 1045 519 1476
1000 17 74 1161 559 1516
1200 17 89 1393 641 1598
1400 17 103 1625 747 2179
1600 21 96 1813 806 2238
1800 21 108 2040 885 2817
2000 21 120 2266 964 2896
*For SDR < indicated, the restraint flange shall be designed to suit.
All restraint flanges are available with optional Hydrophilic water-stop fitted in the flange, this expands when wet to prevent leakage along the pipe.
Restraint size design for use with concrete ≥20Mpa
Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications. Due to constant product improvement these dimensions may alter without notice. Please contact Mill-Pro for the latest updated dimensions for critical applications.
Z1
w
t
DN/ODd2
Z1
Restraint Flange – XL Leg length designed to extend beyond the corbel, alternate lengths can be ordered.
90º FORMED SWEPT BENDS: PE100 SDR11 / PE16-SDR17 / PN10 (r=1.5DN)
DN/OD le r Z
90 116 135 300
110 151 165 392
125 163 188 433
140 168 210 462
160 196 240 534
180 217 270 596
200 224 300 636
225 254 338 719
250 242 375 738
280 238 420 777
315 334 473 974
355 397 533 1129
400 420 600 1230
450 315 *900 1530
500 385 *1000 1770
*r=2DN
Minimum outside wall thickness is ≥0.93 x emin in accordance with DVS 2210-1.
Z
r
le
minimum ≥0.93
DN/OD
r = 2.0DN
r = 1.5DN
-
› ELECTROFUSIONFITT INGS
www.mill-pro.com.hk›
Mill-Pro PE Water – ISO / EN | 49
Mill-Pro partners with FRIATEC to offer the worlds
leading electro-fusion products to selected
markets in the Asia Pacific region.
Founded in 1863, Friatec developed the world’s
first electro-fusion products in 1979 for joining
PE gas pipes. Friatec remains the world leader in
electro-fusion products for water, wastewater and
gas.
From their world class automated manufacturing
facilities in Mannheim Germany, Friatec offers
a vast range of electro fusion products, tools,
accessories and welding machines to provide a
complete solution from 110mm to 1200mm.
For the full product range contact Mill-Pro or visit
www.friatec.com Technical Plastics.
Concrete support block, exposed rising main
EF coupler welding twin 450 OD rising mains
Twin 560 OD SDR17, insertion into an existing duct
Rising main outlet AEM/ASF setup, pre pouring chamber walls
-
Mill-Pro PE Water – ISO / EN | 51
ELECTROFUSION FITTINGS›
EF COUPLERS(MB, UB)
EF Couplers Black (full size range) PN25/SDR7.4 – DN/OD 90-315 PN16/SDR11 – DN/OD 20-900 PN10/SDR17 – DN/OD 110-1200
EF Couplers Blue (specific size range) PN16/SDR11 – DN/OD 32, 50, 63, 90, 125, 180, 250, 315
Other specialist products include slide over couplers for relining, EF end caps, excess flow couplers, long couplers for coiled pipe and removable stop couplers in black.
EF ELBOWS 11º SOCKET-SPIGOT(WS11)
EF Elbows Black PN16/SDR11 – DN/OD 110-225
EF Elbows Blue PN16/SDR11 – DN/OD 125, 180
EF ELBOWS 30º & 45º SOCKET-SOCKET(W30 / W45)
EF Elbows Black (full size range) PN16/SDR11 – DN/OD 32-315
EF Elbows Blue (specific size range) PN16/SDR11 – DN/OD 32, 50, 63, 90, 125, 180
EF ELBOWS 90º SOCKET-SOCKET(W90)
EF Elbows Black (full size range) PN16/SDR11 – DN/OD 25-315
EF Elbows Blue (specific size range) PN16/SDR11 – DN/OD 32, 50, 63, 90, 125, 180
EF TEE PIECES (EQUAL)(T)
EF Equal Tee’s Black (full size range) PN16/SDR11 – DN/OD 75-315
EF Equal Tee’s Blue (specific size range) PN16/SDR11 – DN/OD 90, 125, 180
EF Reducing Tee’s Black (full size range) PN16/SDR11 – DN/OD 75-315
EF REDUCER COUPLERS(MR)
EF Reducing Couplers Black (full size range) PN16/SDR11 – DN/OD 32-225 / dn 16-160
EF Couplers Blue (specific size range) PN16/SDR11 – DN/OD 50x32, 63x32, 63x50, 90x63
EF SPIGOT TEE PIECES (EQUAL & REDUCING)(TA / TA red)
EF Equal Tee’s Black PN16/SDR11 – DN/OD 25-63
EF Equal Tee’s Blue PN16/SDR11 – DN/OD 32, 50, 63
EF Reducing Tee’s Black PN16/SDR11 – DN/OD 32, 50, 63
EF PRESSURE TAPPING TEES(DAA)
Under pressure tapping tees with extra long spigot + fusing support under saddle
EF Tapping Saddles Black (full size range) PN16/SDR11 – DN/OD 40-225 / dn 20-63
EF Tapping Saddles Blue (specific size range) PN16/SDR11 DN/OD 63x32, 90x63, 125x63, 180x63
NOTE – Friatec offer a wide range of side fusion tees and top loading spigot saddles, including specialist pipe repair and relining products for sizes up to 560 OD pipe refer to www.friatec.com for the full product range.
-
Mill-Pro PE Water – ISO / EN | 53
ELECTROFUSION FITTINGS›
EF COUPLERS(UB, AM, KM, REM) PN10 / SDR17 – DN/OD 110-1200 PN16 / SDR11 – DN/OD 63-900 PN20 / SDR9.0 – DN/OD 400-630 PN25 / SDR7.4 – DN/OD 110-355
Complying with EN 12201-3 Slide over options for section insertion Separate fusion zones on larger sizes Special stepped size range for pipe relining
EF ELBOWS 11º – SOCKET-SPIGOT(WS11) PN16 / SDR11 – DN/OD 110-225
Complying with EN 12201-3
EF ELBOWS 30º – SOCKET-SOCKET(WS30) PN16 / SDR11 – DN/OD 110-225
Complying with EN 12201-3
EF ELBOWS 45º(W45 & W45-XL) PN16 / SDR11 – DN/OD 110-315
Complying with EN 12201-3 Separate Fusion zones on sizes ≥250
EF ELBOWS 90º(W90 & W90-XL) PN16 / SDR11 – DN/OD 110-315
Complying with EN 12201-3 Separate Fusion zones on sizes ≥250
EF TEE PIECES REDUCING SPIGOT(T-Red-XL) PN16 / SDR11 – DN/OD 250-315 (110 / 225 outlets)
Complying with EN 12201-3 Separate Fusion zones on sizes ≥250
EF REPAIR VACUUM LOADING SADDLES(RS-XL) PN10 / SDR17 – DN/OD 560-1000
For repairing surface damage Vacuum loading
EF REPAIR SADDLES(VSC-TL) Top Loading PN16 / SDR11 – DN/OD 250-560
Can be used live to repair leaking pipe
EF SPIGOT VACUUM LOADING SADDLES(SA-XL) PN16 / SDR11 – DN/OD 315-450 (160, 225, 160 Off takes) PN10 / SDR17 – DN/OD 560-1200 (160, 225 Off takes)
Vacuum loading
EF REPAIR & REINFORCING SADDLES(VVS) PN16 / SDR11 – DN/OD 110-225
Can be used live to repair leaking pipe Two Part clamp
EF SPIGOT SADDLES(SA-TL) Top Loading PN16 / SDR11 – DN/OD 250-315 (63, 90, 110 spigot outlets)
For Sewerage Air valve off takes
EF SPIGOT SADDLES(SA) PN16 / SDR11 – DN/OD 110-225 (50 to 160 spigot outlets)
Under part mechanical clamp For Sewerage Air valve off takes
EF TEE PIECES EQUAL(T-XL) PN16 / SDR11 – DN/OD 110-400
Complying with EN 12201-3 Separate Fusion zones on sizes ≥250
-
Mill-Pro PE Water – ISO / EN | 55
www.mill-pro.com.hk›
› REINERT-RITZ F ITT INGS
Mill-Pro partners with REINERT-RITZ to offer
the worlds leading specialist engineered PE
products to selected markets in the Asia Pacific
region. Founded in 1970, Reinert-Ritz developed
engineering solutions for plastic products that
others have followed.
Reinert-Ritz holds multiple patents for
technologies associated with Polyethylene
pipeline materials and is the world leader in
fabricated engineered PE products for water,
wastewater and gas with German DVGW
approvals on most products.
From their world class manufacturing facilities in
Nordhorn Germany, Reinert-Ritz offers a wide
range of specialist engineered PE products with
to provide complete solutions to integrate PE from
63 to 2000mm.
For the full product range contact Mill-Pro or visit
www.reinert-ritz.com
Fully pressure tested double reduced 45º Branch Tee
Multi-axis CNC machining centre with capability >2000mm
Large bore swept branch tees
Large bore fully pressure rated equal branch tee
This fitting demonstrates the capability of Reinert-Ritz to create almost any fitting that can be conceived. In this case a hydrant off-take with level invert scour and branch tee, fully pressure rated.
-
REINERT-RITZ FITTINGS
Mill-Pro PE Water – ISO / EN | 57
›
OBLIQUE BRANCH TEES – EQUAL & REDUCINGAny angle from 45° - 90° Fully Pressure rated Available PN4 - PN25 Butt weld or Long spigot
DN/OD 250 - 1200mm
90° REDUCED OFFTAKE TEEFully pressure rated Available PN4 - PN25 Offtake butt weld Main way in long spigot or butt weld
DN/OD 280 - 1600mm
PULLING HEADPulling head (Watertight) DN 40-125 mm with eye bolt DN 140-630 mm with eye nut Optional: from DN 500 mm additional 500 kN pulling eye Butt weld
DN/OD 40 - 1200mm
SHORT FORM END CAPSFully pressure rated Available PN4 - PN25 Butt weld only
DN/OD 50 - 1200mm
NON-BURIED FIXING POINTResists longitudinal pipe movement Designed to be integrated with steel straps Butt Weld
DN/OD 280 - 1600mm
LONGITUDINAL COMPENSATORFully end load resistant EPDM seals to BS 6920 Outer case PVC Rated up to PN16 Flanged ends, Butt weld or long spigot
DN/OD 110 - 315mm
Larger sizes on request
INSERTION REPAIR COUPLERInsert & slide back to repair For joining where welding is not possible and pipe ends position is fixed Fully end load resistant Push in joint Available PN10 & PN16 EPDM seals to BS 6920
DN/OD 90 - 225mm
DOUBLE COUPLERFor joining where welding is not possible Fully end load resistant Push in joint Available PN10 & PN16 EPDM seals to BS 6920
DN/OD 90 - 225mm
FLANGE ADAPTER REINOGRIP XLJoining flange to pipe where welding is not possible Fully end load resistant Push in joint Available PN10 & PN16 EPDM seals to BS 6920
DN/OD 160 - 450mm
SPIGOT FLANGE ADAPTERSFor direct connection standard flange DN’s Available in flanges PN10 - PN25 Including EPDM O-ring or flat gasket Backing rings, FBE coated, Stainless steel, HDG Long spigot
DN/OD 90 - 2000mm
90º45º
-
Mill-Pro PE Water – ISO / EN | 59
Pushfit features
Pushfit fittings are quick and easy to use, with no nuts to loosen or leave undone. They are a ‘stab’ fitting, simply push the Polyethylene pipe fully home into the fitting to complete the joint. Designed for connections between 20mm to 63mm PE, they are available in joiners, bends, tee’s reducers, threaded ends etc.
Pushfit fittings are rated* “Class 1” according to ISO 14236. The means the fitting is fully end-load bearing at test pressure. The pipe will not pull out of the fitting under tensile load (such as in ground movement conditions). Tensile resistance without pressure in the pipe is the hardest condition to achieve, as typically in such mechanical compression fittings the internal pressure assists the fitting to grip the pipe resisting tensile loads.
The gripping of the PE pipe and seal between the pipe and fitting increases with pressure and tensile load so the pipe will fail before the fitting lets go of the pipe or leaks.
Benefits
• Rapid & Reliable assembly on site, no loose parts to assemble or lose in the trench
• Simple assembly in any weather condition, up to 10 x faster assembly than electro fusion joints and no cleanliness requirements on site • Eliminates any risk of galvanic corrosion sometimes found between PE transition couplers and valve materials especially in saline conditions
• Complete product range available to connect the pipe to other materials such as valves and other fittings and also to connect different sizes of PE up to 63mm OD
• Manufactured from engineered plastic Acetal in black colour for maximum durability & UV resistance in above or below ground applications
• Millions of Pushfit fittings have been in service around the world for more than 30 years with a long and reliable reputation
*
Technical data for waterWorking Pressure: Fully rated for 16Bar operating pressure @ 20°C
Test Pressure: Rated for 24 bar test pressure @ 20°C
Working temperature: Up to 40°C continuous operation
Pushfit meets or exceeds the requirements of the following standards for fittings:
BS EN 1254-3-1998, ISO 3458, 3459, 3501, 3503, DIN 8076, WIS 4-23-04, WIS 4-32-11 AS/NZS 4129, All fittings are WRAS listed for water potability approvalPushfit fittings can be used to connect to PE pipe manufactured to the following specifications:
BS EN 12201-2 ISO 4427 AS/NZS 4130 AWWA C901-78 ASTM - D2737 PE BS 6572, 6730, 1972, 3284, DIN 8072, 8074, all series ISO 161 Parts 1 & 11 WIS 4-32-03, WIS 4-32-13
* Pushfit fittings are designed for SDR11 or lower pipe, in some cases to obtain a Class 1 tensile loading with no internal pressure on SDR 11 pipe, a liner may be required, these are supplied at no charge
› P
US
HF
IT
FIT
TIN
GS
www.mill-pro.com.hk›
* PUSHFIT is a registered trademark of Atlantic Plastics Ltd a subsidiary of
Talis Management Holding GmbH
-
Mill-Pro PE Water – ISO / EN | 61
PUSHFIT FITTINGS›
CONNECTORS PE-PE20mm 25mm 32mm 40mm 50mm 63mm
REDUCING CONNECTORS PE-PE25mm x 20mm 32mm x 20mm, 25mm 40mm x 25mm, 32mm 50mm x 20mm, 25mm, 32mm, 40mm 63mm x 20mm, 25mm, 32mm, 40mm, 50mm
MALE TRANSITION THREAD TO PE FITTINGS20mm x 15mm & 20mm BSP 25mm x 15mm & 20mm BSP 32mm x 15mm, 20mm, 25mm, 50mm BSP 40mm x 32mm BSP 50mm x 40mm BSP 63mm x 50mm BSP
FEMALE TRANSITION THREAD TO PE FITTINGS20mm x 15mm & 20mm BSP 25mm x 15mm & 20mm BSP 32mm x 15mm, 20mm, 25mm BSP 40mm x 32mm BSP 50mm x 40mm BSP 63mm x 50mm BSP
STOP END 20mm 25mm 32mm 50mm 63mm
ELBOWS 90DEG PE-PE20mm x 20mm 25mm x 20mm, 25mm 32mm x 25mm, 32mm 40mm x 40mm 50mm x 50mm 63mm x 63mm
EQUAL TEES PE-PE-PE20mm 25mm 32mm 40mm 50mm 63mm
UN-EQUAL TEES PE-PE-PE(Main x Main x Off take)
25mm x 25mm x 20mm 32mm x 20mm x 20mm 20mm x 20mm x 32mm 32mm x 32mm x 20mm 25mm x 25mm x 32mm 32mm x 32mm x 25mm 63mm x 63mm x 25mm 63mm x 63mm x 32mm
REPAIR CONNECTORS PE-PE20mm 25mm 32mm
UN-EQUAL TEES PE-PE-THREAD(Main x Main x Off take thread)
20mm x 20mm x 15mm BSP female 25mm x 25mm x 15mm BSP female 25mm x 25mm x 20mm BSP female 32mm x 32mm x 25mm BSP female 50mm x 50mm x 40mm BSP female 63mm x 63mm x 50mm BSP female
LINERS FOR CLASS 1 CONNECTIONS20mm 25mm 32mm 50mm 63mm
-
www.mill-pro.com.hk›
› F
LA
NG
E
CO
NN
EC
TIO
NS
BACKING RING: HD GALV / FBE COATED / PP COATED / 316 STAINLESS EN 1092 PN10 STEEL 63
BACKING RING: HD GALV / FBE COATED / PP COATED / 316 STAINLESS EN 1092 PN16 STEEL 64
BACKING RING: HD GALV / FBE COATED / 316 STAINLESS STEEL ANSI B16.5 CLASS #150 65
Mill-Pro offers backing rings according to EN
1092 PN10 and PN16 in either Steel (grade
250Mpa) & Ductile Iron (Grade 400-10) or Grade
316 Stainless Steel.
Steel & Ductile Iron are either coated with 300um
Fusion Bonded Epoxy (FBE), or Hot Dipped
Galvanised (HDG) or completely encapsulated
with high flexural modulus Poly Propylene.
Mill-Pro PE Water – ISO / EN | 63
BACKING RING: HD GALV / FBE COATED / PP COATED / 316 STAINLESS EN 1092 PN10 STEEL
EN 1092 PN10DN (Flange) DN (Pipe) D k (PCD) d2 No. of bolt
holest1
50 63 165 125 18 4 20
65 75 185 145 18 8 20
80 90 200 160 18 8 20
100 110 220 180 18 8 22
100 125 220 180 18 8 22
125 140 250 210 18 8 22
150 160 285 240 22 8 24
150 180 285 240 22 8 24
200 200 340 295 22 8 24
200 225 340 295 22 8 24
250 250 395 350 22 12 26
250 280 395 350 22 12 26
300 315 445 400 22 12 26
350 355 505 460 22 16 30
400 400 565 515 26 16 32
450 450 615 565 26 20 36
500 500 670 620 26 20 38
600 560 780 725 30 20 42
600 630 780 725 30 20 42
700 710 895 840 30 24 50
800 800 1015 950 33 24 56
900 900 1115 1050 33 28 62
1000 1000 1230 1160 36 28 70
1200 1200 1455 1380 39 32 83
1400 1400 1675 1590 42 36 TBA
1600 1600 1915 1820 48 40 TBA
1800 1800 2115 2020 48 44 TBA
TBA - Dimension to be supplied by purchaser
k
D
d2
t1
-
Mill-Pro PE Water – ISO / EN | 65
FLANGE CONNECTIONS›
BACKING RING: HD GALV / FBE COATED / PP COATED / 316 STAINLESS EN 1092 PN16 STEEL
EN 1092 PN16DN (Flange) DN (Pipe) D k (PCD) d2 No. of bolt
holest1
50 63 165 125 18 4 20
65 75 185 145 18 4 20
80 90 200 160 18 8 20
100 110 220 180 18 8 22
100 125 220 180 18 8 22
125 140 250 210 18 8 22
150 160 285 240 22 8 24
150 180 285 240 22 8 24
200 200 340 295 22 12 26
200 225 340 295 22 12 26
250 250 405 355 26 12 29
250 280 405 355 26 12 29
300 315 455 410 26 12 32
350 355 520 470 26 16 35
400 400 580 525 30 16 38
450 450 640 585 30 20 42
500 500 715 650 33 20 46
600 560 840 770 36 20 55
600 630 840 770 36 20 55
700 710 910 840 36 24 63
800 800 1025 950 39 24 74
900 900 1125 1050 39 28 82
1000 1000 1255 1170 42 28 90
1200 1200 1485 1390 48 32 TBA
1400 1400 1685 1590 48 36 TBA
1600 1600 1930 1820 56 40 TBA
1800 1800 2130 2020 56 44 TBA
TBA - Dimension to be supplied by purchaser
k
D
d2
t1
BACKING RING: HD GALV / FBE COATED / 316 STAINLESS STEEL ANSI B16.5 CLASS #150
ANSI B16.5 Class #150DN (Flange) DN (Pipe) D k (PCD) d2 No. of bolt
holest1
2" 63 150 120.7 19.05 4 19.1
2.5" 75 180 139.7 19.05 4 22.3
3" 90 190 152.4 19.05 4 23.9
4" 110 230 190.5 19.05 8 23.9
4" 125 230 190.5 21.44 8 23.9
5" 140 255 215.9 21.44 8 23.9
6" 160 280 241.3 21.44 8 25.4
6" 180 280 241.3 21.44 8 25.4
8" 200 345 298.5 21.44 8 28.6
8" 225 345 298.5 21.44 8 28.6
10" 250 405 362.0 25.40 12 30.2
10" 280 405 362.0 25.40 12 30.2
12" 315 485 431.8 25.40 12 31.8
14" 355 535 476.6 22.58 12 35.0
16" 400 595 539.8 22.58 16 36.6
18" 450 635 577.9 31.75 16 39.7
20" 500 700 635.0 31.75 20 42.9
22" 560 815 749.3 31.75 20 47.7
24" 630 815 749.3 34.93 20 47.7
ASME B16.47 Series A Class #15028" 710 925 863.8 34.93 28 69.9
32" 800 1060 977.9 41.28 28 79.4
36" 900 1170 1085.8 41.28 32 88.9
40" 1000 1290 1200.2 47.63 36 88.9
44" *1200 1405 1314.3 41.28 40 100.1
46" *1200 1455 1365.2 41.28 40 101.6
48" 1200 1510 1422.4 41.28 44 106.4
52" *1400 1625 1536.7 47.63 44 11.3
54" 1400 1685 1593.8 47.63 44 119.1
56" 1400 1745 1651.0 47.63 48 122.3
58" *1600 1805 1708.2 47.63 48 127.0
60" *1600 1855 1759.0 47.63 52 130.2
* Stub flange may require modification
k
D
d2
t1
-
Mill-Pro PE Wastewater – ISO / EN | 67
› MECHANICALCONNECTORS
www.mill-pro.com.hk
There are circumstances where the application
of electrofusion or butt-welding of Polyethylene
is simply not possible due to emergency repair
situations, environmental conditions, location or
the inability to provide a dry & clean environment
to conduct welding in.
In these circumstances mechanical connectors
can be utilised. A wide range of mechanical
products for Polyethylene pipe are available, these
include;
• Connections between pipes – such as inserting a replacement pipe section
• Providing a flanged end to attach equipment such as valves & pumps
• Connections to provide off takes for air valves or angled intakes
• Repair clamps to repair & support damaged pipe.
In accordance with WIS 4-24-01 there are several
types of mechanical restraint joints for PE, each
carries a different designation depending on its
ability to maintain transfer of lineal forces along
the pipeline
• Type 1 fittings: where the end-load resistance of the joint is greater than the longitudinal strength of the pipe. Meaning that in tension, the pipe will always fail before the joint, regardless of the pipes operating condition – equivalent of a welded joint.
• Type 2 fittings: where the end-load resistance of the joint is greater than the maximum axial forces assumed to be acting on the joint (see IGN 4-01-02). Meaning the joint will provide restraint to the operating pressure under normal conditions.
• Type 3 fittings: where the end-load resistance of the joint is less than that required for Type 2 fittings. Meaning all other joints typically rubber ring socketed joints, which do not provide any restraint.
If restraint is not available within the fitting itself,
external restraint flanges anchoring each side
of the unrestrained joint can provide equivalent
restraint.
›
-
MECHANICAL CONNECTORS
Mill-Pro PE Wastewater – ISO / EN | 69
›
REPAIR CLAMPSIn the case of repairing damaged PE while live or in wet conditions, stainless steel repair clamps can be used. These are manufactured from 316 stainless steel so can be used for permanent buried service.
Typically available size range is 110mm OD to 1600mm OD.
Pressure ratings up to 16Bar.
COUPLERSPipe coupler – Used for making pipe-to-pipe connections. ‘Slide over’ meaning the fitting can be used to insert a section of pipe in between two existing fixed pipe ends.
Typically a