pm_spray_gun_for_grc

2
P/M Spray Gun

Upload: powersprays

Post on 04-Mar-2016

221 views

Category:

Documents


0 download

DESCRIPTION

 

TRANSCRIPT

Page 1: pm_spray_gun_for_grc

P/M Spray Gun

Page 2: pm_spray_gun_for_grc

For further information contact: Power-Sprays Limited Avonmouth Way Avonmouth Bristol BS11 9YA

: +44 (0)117 9820067 Fax: +44 (0)117 9820060 [email protected] www.power-sprays.co.uk

MEMBERS OF THE INTERNATIONAL GLASSFIBRE REINFORCED CONCRETE ASSOCIATION

P/M SPRAY GUN

The PM Spray gun is a hybrid of the MK3 Powertex gun. It was originally developed as a pump fed version of the MK3 Powertex gun which could handle mixes with larger particles of up to approximately 3mm (subject to particle shape and angularity). The PM gun can be fitted with a hopper and used as a stand-alone unit. Adjustment of the air pressure, air injector and nozzle size enables the operator to create a range of textured finishes. The PM gun is ideal for spraying facing coats where a heavy, random texture is required. The Power-Sprays P/M Spray Gun is designed for spraying the following coatings:

• Cementitious renders, • Facing mixes containing sand, lime etc, • Textured coatings and stone paints, • Aggregate loaded resins, • Fire protective coatings (containing Vermiculite, Perlite etc) • Bitumen emulsions and Plasters • Refractory coatings • Fibre Reinforced Renders

For more detailed information and product specification, please contact your local agent or our UK based sales team.