Plastic Pipes2017InternationalConference

The Society of Plastics Engineers India

Plastic Pipes 201723rd and 24th November, 2017 Mumbai, India

Current Scenario & Future Trends

Chair / Co-Chair AddressPlastic Pipes 2017

Since the Introduction of Plastic Pipes over five decades ago, Plastic Pipes have become the material of choice for nearly all applications ranging from Water supply, Sewerage and Drainage, Agriculture, Plumbing and Sanitary, Communication and Ducting, Industrial, Irrigation Systems, Offshore and even Oil and Gas. With improvement in the production and processing techniques, use and its applications over the years, it has been proved beyond doubt that they are the most superior material for a wide range of installations across the above segments due to its inherent properties, superb corrosion and chemical resistance, greater logistical and installation cost advantage, stronger, tighter, leak proof and self- restraining joints, zero maintenance etc.

The other added advantages are alternative installation methods (no-dig for example) which can save considerable time and money in many applications, particularly rehabilitation of pipelines etc due to its light weight and easier on site handling. For example, PE is about one eighth the density of steel, so it does not require use of heavy lifting equipment for jointing and installation. Above all, most of the Plastic Pipes have better sustainability credentials with the environment in mind as the Plastic Pipes require less energy in production than alternative material.

Even at the end of their useful life, Plastic Pipes can be easily recycled. All these combined

advantages, coupled with the potential long service life (of over 50 years) leads to further cost advantages in the long term. The whole life cycle cost, in which all the costs associated with a pipeline throughout its lifecycle, from material cost to installation and maintenance, even on the most conservative estimates, have found that installed costs get reduced by as much as 70% and the whole life cost by over 45%, apart from savings in carbon footprint.

An Obvious Choice ??

Today, with the rapid pace of urbanization, by the year 2050 over 70% of the population would have moved to urban locations and there will be 600 million more Indians who will demand their share of water and food, but by then, the per capita availability of water is projected to fall to dangerous levels, from the present 1545 cubic meters. Even now, about 220 million Indians have access to less than the minimum level of 1000 cubic meters, indicating severe stress.

Various learnings from different missions set up by the government have shown that infrastructure creation should have direct impact on the basic and real needs of people, primary amongst that is to provide clean, safe drinking water and sanitation to the citizens. Providing these basic services to households and build amenities in cities and generally improve the infrastructure facilities which will improve the quality of life for all is a national

Dr. Shreekant DiwanChairmanPlastic Pipes 2017

Mr. Haresh R. PillayCo-ChairmanPlastic Pipes 2017

priority today and is being implemented with the required zeal. An estimate of funds required over 20 years at 2010 prices was made by a high power committee set up by the government which estimated that over Rs 39.20 Lakh Crore was required for creation of urban infrastructure, which includes Rs 17.30 Lakh Crores for urban roads and over Rs 8.00 Lakh Crores for services such as water supply, sewerage, solid waste management and storm water drains. Besides this, the requirement for O&M was separately estimated to be Rs 19.90 Lakh Crore.

To facilitate this, AMRUT (Atal Mission for Rejuvenation and Urban Transformation), has been launched in which five hundred cities will be taken up initially and the focus will be on water supply, sewerage facilities, storm water drains etc apart from providing other amenities for transport and recreation. In addition to this, The Smart City Mission proposes support to the extent of Rs 48,000 crores for 100 cities on an average of Rs 100 crores per city per year to which an equal amount will be matched by the state governments and nearly Rs One Lakh Crore will be available for smart cities development. The scheme of Housing for all by 2020 and resurrection of Building and Construction industry segments will act like a catalyst as the demand for internal piping will see a spurt. The consolidation of demand for pipes

in agriculture and micro irrigation schemes will add further volumes to the demand and holds tremendous potential.

Can Plastic Pipes Be Left Behind In This??

A Word Of Caution Though!!

The Plastic Pipe industry is growing @ 8% or more which is well above the GDP growth rate of 5 or 6% (unlike the projections) but has the potential to grow at double that rate, given the need of the hour and the impetus and resources being made available by the government and certainly holds promise not only for consolidation and expansion in the industry but also to have an all -round improvement in the quality and reliability aspect of both the product offering and associated services, apart from increasing productivity and reliability.

SPE India had successfully organized the Plastic Pipe 2015 Conference with all the above aspects in mind and with a clear intention to bring all the stakeholders in the entire value chain together to share and exchange knowledge, overcome the challenges and identify opportunities for growth.

Plastic Pipes 2017, organized on 23rd/24th November 2017, by SPE India will take it a step forward and continue to ensure sustained interaction between the stakeholders and looks forward for active participation from the industry.

2 3

Organizing CommitteePlastic Pipes 2017

Plastic Pipes 2017 Conference Chairman

Dr. Shreekant DiwanHead of Business Development Baerlocher India

Plastic Pipes 2017 Conference Co-Chairman

Mr. Haresh R. PillayPresidentTime Technoplast Ltd.

SPE IndiaIT & Logistics

Mr. Ramesh ParasuramanManaging Director

Allied Solutions (I) Pvt. Ltd

SPE IndiaFinance

Mr. Rajiv SanghaviCEO

Satellite Plastic Industries

SPE IndiaPresident

Mr. Vijay BoolaniPresident

Boolani Engineering Corpn.

SPE IndiaCommittee Member

Mr. Roop P. Devnani

SPE IndiaCommittee Member

Mr. Prem G. Manghani

SPE IndiaVice President

Prof. D.D. Kale

SPE IndiaCommittee Member

Mr. Surinder S. Ahluwalia

4 5

Day 123rd November, 2017

08.00 - 09.00 Registration

09.00 - 10.35 Inaugural Session

09.00 - 09.10Welcome AddressVijay Boolani - President, SPE India

09.10 - 09.35

Keynote Address I -Role of Plastic Pipes in 24x7 Water Supply of Smart CitiesDr. S. V. Dahasahasra - Former Member Secretary, Maharashtra Jeevan Pradhikaran

09.35 - 10.00Keynote Address II - Polyolefin and PVC Market Trends and OutlookMalini Hariharan - Head of South Asia Markets, ICIS

10.00 - 10.25Keynote Address III - Plastic Pipes Sector - Investment OpportunitiesDr. Shreekant Diwan - Chairman Conference, SPE India

10.25 - 10.30Vote of ThanksRamesh Parasuraman - Hon. Secretary, SPE India

10.30 - 10.35Introduction to SPE Conference CommitteeVijay Boolani - President, SPE India

10.35 - 11.00 Coffee Break

11.00 - 12.30 Business Session I

Moderator: Dr. D.D.Kale, Consultant to Plastic Industry

11.00 - 11.25PVC Pipes Stabilization: Are We Ready For The Change?Alok Ghodgaonkar - Regional Manager, Baerlocher India Additives Pvt. Ltd.

11.25 - 11.50

Successful use of HDPE pipes for Desalination Projects and Future ChallengesDr. Purnima Jalihal - Scientist-G & Head - Energy & Fresh Water, National Institute of Ocean Technology (NIOT)

11.50 - 12.15Polymer Material Solutions for The Piping SystemsDr. Rajeev Basargekar - Technical Director, APPL Ind. Ltd.

12.15 - 12.30 Q & A Session

12.30 - 13.30 Business Session II

Moderator - Haresh Pillay, Co-Chairman Conference, SPE India

12.30 - 12.55Downstream Equipment for Pipes - New InnovationsClaudio Costa - Area Manager, SICA S.P.A

6 7

12.55 - 13.20Large Plastic Pipes SolutionsAlexander Krah - CEO, KRAH Group

13.20 - 13.30 Q & A Session

13.30 - 14.30 Lunch & Networking

14.30 - 16.00 Business Session III

Moderator - Dr. Shreekant Diwan, Chairman Conference, SPE India

14.30 - 14.55DWC: The New Drainage Pipe FriendLeon - Sales Manager, Dalian Sunlight Technology Co. Ltd.

14.55 - 15.20PVC Pipes Extrusion OptimizedRajesh Shinde - Managing Director, Theysohn Extrusionstechnik (I) Pvt. Ltd.

15.20 - 15.45

Smart Process Automation Solutions to ensure consistent high quality product at optimum input cost.Arun Pundir - Executive Director, Aerodry Plastics Automation Private Limited

15.45 - 16.00 Q & A Session

16:00 - 16.20 Coffee Break

16.20 - 17.20 Business Session IV

Moderator - Roop Devnani, Committee Member, SPE India

16.20 - 16.45Corrugated Pipe Technology and Case StudiesPiercarlo Cominelli - Sales Manager, ITIB Machinery International

16.45 - 17.10Economy & Competitiveness through Automation in Pipe ManufacturingDhruv Shah - Executive Director, Prasad Group of Companies

17.10 - 17.20 Q & A Session

17.20 - 18.00 Coffee Break

18.00 - 19.00 VIP DINNER SPEECH

18.00 - 18.45 Success without StressSwami Swatmananda, Chinmaya Mission

18.45 - 19.00 Q & A Session

19:15 Cocktails & Dinner

Day 123rd November, 2017

8 9

Day 224th November, 2017

09:00 - 10.55 Business Session V

Moderator: Dr. D.D.Kale, Consultant to Plastic Industry

09.00 - 09.25The use of PE100 and trenchless technology to install and rehabilitate utility networks and the PE100+ Online GuideAndrew Wedgner - Borouge, Abu Dhabi

09.25 - 09.50Keeping an eye on diameter, wall thickness, eccentricity and sagging: Online quality control during pipe productionHolger Lieder - Sales Director, Sikora AG

09.50 - 10.15PA - TPU High Speed Pipes ExtrusionFabrizio Cividini - Area Sales Manager, Friul Filiere S.P.A.

10.15 - 10.40Extending the life of water distribution networkChanchal Dasgupta - Application Marketing Manager (Infrastructure), Borouge (India) Pvt Ltd

10.40 - 10.55 Q & A Session

10.55 - 11.30 Coffee Break

11.30 - 13:00 Business Session VI

Moderator: Andrew Wedgner - Borouge, Abu Dhabi

11.30 - 11.55New Age Modifiers & Their Role in Vinyl Pipes & Fittings IndustryAshok Kumar - Sr. Manager Business Development - Plastics, Indofil Industries Limited

11.55 - 12.20The Evolution of Elastomeric Joints in Plastic Pipeline SystemsMartijn Boerma - Business Development Manager Asia Pacific, Trelleborg Pipe Seals

12.20 - 12.45Innovations in Jointing TechnologyJim Johnston - Chief Innovation Officer, McElroy Manufacturing Inc

12.45 - 13.00 Q & A Session

13:00 - 14.00 Lunch & Networking

10 11

Day 224th November, 2017

14.00 - 15.30 Business Session VII

Moderator: Chanchal Das Gupta - Application Marketing Manager (Infrastructure), Borouge (India) Pvt Ltd

14.00 - 14.25LCA Comparison : PVC Pipes and The Traditional Material PipesLinchon Mehta - Dept. of Polymer and Surface Engineering, Institute of Chemical Technology (ICT)

14.25 - 14.50The Raw Material of FPC for pipe applicationGeorge Yen - Director, Formosa Plastics Corporation

14.50 - 15.15Integrated Solution Provider in PipeM.A. Khan - AVP, Kabra Extrusiontechnik Limited

15.15 - 15.30 Q & A Session

15.30 - 15.55 Coffee Break

15.55 - 17:25 Business Session VIII

Moderator: Surinder S. Ahluwalia, Committee Member, SPE India

15.55 - 16.20R&D of Continuous Glass Fiber Reinforced Large Diameter Polyethylene PipeZecheng Lin - Sales Engineer, Zhejiang Shuanglin Machinery Co. Ltd.

16.20 - 16.45Revolutionary Drainage SystemManoj Dhar - Vice President - Sales & Marketing (Piping Division), Astral Poly Technik Limited

16.45 - 17.10NEW BIS Standards : Challenges for the PE Pipe ProducersPrashant Nikhade - Specialist PE Pipes Design and Installation

17.10 - 17.25 Q & A Session

17.25 - 17.40Closing Remarks : Haresh Pillay, Co-Chairman Conference, SPE India

17.40 - 18:00 Lucky Draw

12 13

PLASTIC ENGINEERING

APPLTM

Automotive | Pipes & Irrigation | Wires & Cables | House Hold Appliances

PP Compounds

Engineering Plastics Color and Speciality Additive Master Batches

Maharashtra . Haryana . Tamilnadu . Gujrat

APPL Industries LimitedSurvey No 279 (1 & 2 ), Hinjewadi Phase ll, Mulshi, Pune, Maharashtra - 411057 info@applindustries.com

14 15

www.friulfiliere.it

» 103 Mt/min extrusion speed

»

» High quality finished product

Friul Filiere agent in India: Mr. RA JIV SANGHAVI T. +91-22-62231691-92-93 / info@satelliteindia.comwww.satelliteindia.com

HALL 5 - STAND C12

COMPLETE EXTRUSION LINES AND TOOLINGS FOR PIPES AND PROFILIES

High quality finished product: 160 kg/h

PATENTED TECHNOLOGY

TUBEASY

16 17

Zero LeakageTotal performanceHigh-performance solutions:

Trelleborg Pipe Seals | www.trelleborg.com/pipe-seals

Din-Lock™

Sewer-Lock™

Anger-Lock™

Power-Lock™

18 19

Patrons

Platinum

Kit Bag

Gold

Silver

20 21

EXTRUSION TECHPIPE SHREDDING TECHNOLOGY

SINGLE SHAFT SHREDDER WITH MOVEABLE HOPPER

FOR HEAVY WALL THICKNESS PIPES

EXTRUSION TECHContact No :+91 9845020207 / 9535202207 / 080 28360114Email : Website : extrusiontech.in

Shed No. 9 & 10, 8th Main, SLV Industrial Estate, Peenya 2nd Stage, Bangalore (INDIA) - 560 058

extrusiontech@rediffmail.com,

For more details please contact:

Patrons

Table Space

Supporters

Media Partners

Event Partner

22 23

SPE Managing Committee

Mr. V. G. NambiarCommittee Member

Mr. Ramesh ThakkarCommittee Member

Dr. Shreekant DiwanProgramme Chair

Mr. Rajiv Sanghavi International Councilor

Mr. Haresh R. PillayHon. Treasurer

Mr. Prem G. Manghani Mr. Roop P. DevnaniImm Past President

Mr. Surinder S. AhluwaliaNewsletter Chair

Mr. Ramesh ParasuramanHon. Secretary

Prof. D. D. KaleVice President

Mr. Vijay BoolaniPresident

Mr. Achal ThakkarCommittee Member

Mr. B.L. BoolaniCommittee Member

Mr. Jayen ModiCommittee Member

Email: aditya@palvimasterbatches.com sales@palvimasterbatches.com Dhawal-09687033653, Aditya-08980027689

www.palvimasterbatches.com

24 25

SHED NO. B1-216/1,Phase-II Naroda, Ahmedabad-382 330 (Gujarat) INDIAM. +91 98240 21573 T : +91 79 2281 5155F : +91 79 2280 5155E-mail : volcano@corrugatormachines.com pipecorrugatormachines@gmail.comWeb : www.corrugatormachines.com www.volcanoflexitech.com

GIDC Industrial Estate,

Volcano Flexi Tech Industries

DWC CORRUGATED PIPE PLANT

Pipe Corrugator Machine for

Single wall & Double wall

Pioneer Extruder Pvt. Ltd.120,Morya Estate, Opp Infinity MallNew Link Road, Andheri (W)Mumbai - 400053Tel: 40052264 / Mob: 9320234327Email : customerservices@piogroup.inWebsite: www.piogroup.in

HEAD OFFICE

CORE STRENGTHFirst Time Right On Time Delivery Customization

Pack your cPVC & uPVC Solvent Cement with our Products.

We can Support you with various Diameters and Height.

Highest cGMP Quality Compliance with Global Standards.

Pioneer Group Of Industries is a Leading Business Partner to MajorBrands in the PVC Pipes & Fittings Industry, catering to their needs of 1. Aluminium Collapsible Tubes 2. Laminated Tubes 3. Aerosol Cans and Closures

Group Of IndustriesPIONEER

“To Enable Organisation & People, To Live & Enjoy Sustainability.”

“To Enable Organisation & People, To Live & Enjoy Sustainability.”

26 27

For details contact:

SPE India B-315/316, Damji Shamji Corporate Square,

Kanara Business Compound, Laxmi Nagar, Off. Link Road, Ghatkopar (East),

Mumbai 400075, India.

Phone : 022 622 316 91 / +022 422 101 02

Email : info@speindia.org

Website : www.speindia.org