pjt lcd fpm-3060g_series_manual_ed.1

Download PJT LCD FPM-3060G_Series_Manual_ed.1

Post on 29-Mar-2016

213 views

Category:

Documents

0 download

Embed Size (px)

DESCRIPTION

User Manual Flat Panel Monitor with 6" Color TFT/LCD Display Part No. 2003306010 1st Edition Printed in Taiwan June 2005 FPM-3060G Series User Manual ii iii FPM-3060G Series User Manual iv v FPM-3060G Series User Manual vi vii DISCLAIMER: This set of instructions is given according to IEC704-1. FPM-3060G Series User Manual viii

TRANSCRIPT

  • FPM-3060G SeriesFlat Panel Monitor with6" Color TFT/LCD Display

    User Manual

  • Copyright NoticeThis document is copyrighted by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time. Specifications are thus subject to change without notice.No part of this manual may be reproduced, copied, translated, or transmit-ted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd., assumes no responsibility for its use, nor for any infringements upon the rights of third parties which may result from its use.All brand and product names mentioned herein are trademarks or regis-tered trademarks of their respective holders.

    This Manual Covers the Following Models FPM-3060G

    Part No. 2003306010 1st EditionPrinted in Taiwan June 2005FPM-3060G Series User Manual ii

  • Product Warranty (1 year)Advantech warrants to you, the original purchaser, that each of its prod-ucts will be free from defects in materials and workmanship for one year from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper instal-lation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.All defective products under normal / standard operation will be serviced by Advantechs global RMA system. If an Advantech product is defec-tive, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.If you think you have a defective product, follow these steps:1. Collect all the information about the problem encountered. (For

    example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.

    2. Call your dealer and describe the problem. Please have your man-ual, product, and any helpful information readily available.

    3. If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly.

    4. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for war-ranty service.

    5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.iii

  • FCC Class BThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-ence when the equipment is operated in a residential environment. This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with this user's manual, it may cause harmful interference to radio communications.Note that even when this equipment is installed and used in accordance with this users manual, there is still no guarantee that interference will not occur. If this equipment is believed to be causeing harmful interfer-ence to radio or television reception, this can be determined by turning the equipment on and off. If the interference is occurring, the user is encouraged to try to correct the interference by one or more of the follow-ing measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment to a power outlet on a circuit different from that

    to which the receiver is connected Consult the dealer or an experienced radio/TV technician for helpFPM-3060G Series User Manual iv

  • Packing ListBefore installing your equipment, make sure that the following materials have been received: FPM-3060G Series flat panel monitor Accessory pack, including:

    - AC/DC adapter- AC/DC power adapter bracket- Video signal cable, 1.8m- Fixed panel-mounted bracket x 6 pcs- Screw Bags (M4x25 mm screws x 6 pcs)- DC in Power Cord bracket x 1 piece- RS-232 cable, 1.8m (FPM-3060G-R only)or

    USB cable, 1.8m (FPM-3060G-U only)- Driver/manual CD-ROM

    If any of these items are missing or damaged, contact your distributor or sales representative immediately.

    Additional Information and Assistance 1. Visit the Advantech web site at www.advantech.com where you can

    find the latest information about the product.2. Contact your distributor, sales representative, or Advantech's cus-

    tomer service center for technical support if you need additional assis-tance. Please have the following information ready before you call:

    Product name and serial number Description of your peripheral attachments Description of your software (operating system, version, application

    software, etc.) A complete description of the problem The exact wording of any error messagesv

  • Safety Instructions1. Read these safety instructions carefully.2. Keep this User's Manual for later reference.3. Disconnect this equipment from any AC outlet before cleaning. Use a

    damp cloth. Do not use liquid or spray detergents for cleaning.4. For plug-in equipment, the power outlet socket must be located near

    the equipment and must be easily accessible.5. Keep this equipment away from humidity.6. Put this equipment on a reliable surface during installation. Dropping

    it or letting it fall may cause damage.7. The openings on the enclosure are for air convection. Protect the

    equipment from overheating. DO NOT COVER THE OPENINGS.8. Make sure the voltage of the power source is correct before connect-

    ing the equipment to the power outlet.9. Position the power cord so that people cannot step on it. Do not place

    anything over the power cord.10. All cautions and warnings on the equipment should be noted.11. If the equipment is not used for a long time, disconnect it from the

    power source to avoid damage by transient overvoltage.12. Never pour any liquid into an opening. This may cause fire or electri-

    cal shock.13. Never open the equipment. For safety reasons, the equipment should

    be opened only by qualified service personnel.14. If one of the following situations arises, get the equipment checked

    by service personnel:a. The power cord or plug is damaged.b. Liquid has penetrated into the equipment.c. The equipment has been exposed to moisture.d. The equipment does not work well, or you cannot get it to work according to the user's manual.e. The equipment has been dropped and damaged.f. The equipment has obvious signs of breakage.FPM-3060G Series User Manual vi

  • 15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20 C (-4 F) OR ABOVE 60 C (140 F). THIS MAY DAMAGE THE EQUIPMENT.

    The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70dB(A).DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.

    Wichtige Sicherheishinweise1. Bitte lesen sie Sich diese Hinweise sorgfltig durch.2. Heben Sie diese Anleitung fr den spteren Gebrauch auf.3. Vor jedem Reinigen ist das Gert vom Stromnetz zu trennen. Ver-

    wenden Sie Keine Flssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung.

    4. Die NetzanschluBsteckdose soll nahe dem Gert angebracht und leicht zugnglich sein.

    5. Das Gert ist vor Feuchtigkeit zu schtzen.6. Bei der Aufstellung des Gertes ist auf sicheren Stand zu achten. Ein

    Kippen oder Fallen knnte Verletzungen hervorrufen.7. Die Belftungsffnungen dienen zur Luftzirkulation die das Gert vor

    berhitzung schtzt. Sorgen Sie dafr, daB diese ffnungen nicht abgedeckt werden.

    8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.9. Verlegen Sie die NetzanschluBleitung so, daB niemand darber fallen

    kann. Es sollte auch nichts auf der Leitung abgestellt werden.10. Alle Hinweise und Warnungen die sich am Gerten befinden sind zu

    beachten.11. Wird das Gert ber einen lngeren Zeitraum nicht benutzt, sollten

    Sie es vom Stromnetz trennen. Somit wird im Falle einer berspan-nung eine Beschdigung vermieden.

    12. Durch die Lftungsffnungen drfen niemals Gegenstnde oder Fls-sigkeiten in das Gert gelangen. Dies knnte einen Brand bzw. elek-trischen Schlag auslsen.vii

  • 13. ffnen Sie niemals das Gert. Das Gert darf aus Grnden der elek-trischen Sicherheit nur von authorisiertem Servicepersonal geffnet werden.

    14. Wenn folgende Situationen auftreten ist das Gert vom Stromnetz zu trennen und von einer qualifizierten Servicestelle zu berprfen:

    a - Netzkabel oder Netzstecker sind beschdigt.b - Flssigkeit ist in das Gert eingedrungen.c - Das Gert war Feuchtigkeit ausgesetzt.d - Wenn das Gert nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.e - Das Gert ist gefallen und/oder das Gehuse ist beschdigt.f - Wenn das Gert deutliche Anzeichen eines Defektes aufweist. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 betrgt 70dB(A) oder weiger.

    15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Bat-terie.Ersatz nur durch densellb