pinnacle 600/650 - apex facade systems · 2020-01-15 · pinnacle 650 series curtain wall system...
TRANSCRIPT
apexfacades.com 1.2 Pinnacle Pg- 1
Printed on 12/12/17
P I N N A C L E 6 0 0 / 6 5 0H I G H P E R F O R M A N C E C U R T A I N W A L L
1.866.970.5948apexfacades.com
apexfacades.com 1.2 Pinnacle Pg- 2
Printed on 12/12/17
THIS PAGE INTENTIONALY LEFT BLANK
apexfacades.com 1.2 Pinnacle Pg- 3
Printed on 12/12/17
Pinnacle 600 is a thermally broken contemporary stick built curtain wall system that is suitable for low to high rise applications that require a high performance glazing system. The versatile installation methods of Pinnacle ensure compatibility with a wide variety of project applications.
Pinnacle 650 series Curtain wall system features a split-mullion design for simplified field installation, without compromising performance. This captured, two side and four sided SSG system is available in array of back section dimensions to meet your project specific requirements. Finish options include anodized, powder, paint and split finishes.
• Great value with simplified fabrication and installations methods that lead to cost savings
• Industry leading thermal and structural performance
• Structural Silicone Glazed (SSG) or Capped Options
• Industry standard and custom caps available
• Versatile – Accommodates captured, two sided SSG or four-sided SSG
• Corner and Splayed Applications
• Shear block and screw spline design
• Multipurpose sleeve double as reinforcement
• Multiple mullion depths for various applications and spans
• Accommodates a variety of glass infills including Single, Double and Triple
• Glass chairs offer superior glazing support and allow for larger glazing units
FEATURES
OPTIONAL FEATURES
• Steel reinforcement
• Integrated entrance framing systems
• Compatible with Apex Vents and Doors
• Available in 7 standard anodized finishes
• Painted finishes in standard and custom colors
FINISHES
• Wind Load Charts
• Thermal performance charts
• Design assistance and support
TECHNICAL SERVICES
• Split finish option
Pinnacle 600 Series Curtain Wall
apexfacades.com 1.2 Pinnacle Pg- 4
Printed on 12/12/17
ARCHITECTURAL DETAILS
apexfacades.com 1.2 Pinnacle Pg- 5
Printed on 12/12/17
63,5[2 1/2"]
63,5[2 1/2"]
63,5[2 1/2"]
101,6 [4"
]
127
[5"]
152,4 [6"
]
25,4
[1"] T
YP.
34, 9[1 3/8"]
63[2
15/32
"]
87,6
[3 7/1
6"]75
,3[2
31/32
"]
63,5
[
2 1/2"
]
177,8 [7"
]
100,1
[3 15
/16"]
44,8
[1 3/4
"]
63,5
[
2 1/2"
]
63,5
[2 1/2
"]
Reinforcing OptionsPinnacle 600
3"x1"STL. BAR
600140600150
600010
600160600020 600030
600040
6"x1" STL. BAR
600170
5"x1"STL. BAR
4"x1"STL. BAR
apexfacades.com 1.2 Pinnacle Pg- 6
Printed on 12/12/17
127
[5"]
152,4 [6"
]
63,5[2 1/2"]
63,5[2 1/2"]
177,8 [7"
]
63,5[2 1/2"]
66,4
[2 5/8
"]
79,3
[3 1/8
"]
92,1
[3 5/8
"]53
,6[2
3/32"
]
63,5[2 1/2"]
101,6 [4"
]
Reinforcing OptionsPinnacle 600
3"x1"STL. BAR
600140
6"x1"STL. BAR
600170
600150
5"x1"STL. BAR
600050 600051
600054
4"x1"STL. BAR
600160
600052
apexfacades.com 1.2 Pinnacle Pg- 7
Printed on 12/12/17
152,4[6"]
101,6[4"]
25,4[1"]
63,5
[2 1/2
"]
34,9
[1 3/8
"]10
1,6 [4"]
25,4
[1"]
152,4 [6"
]
63,5[2 1/2"]
30[1 3/16"]
H1
V1
H1
V1
Pinnacle 600
600240
600220
600140-A
600140 REINFORCING, IF NECESSARY
600010
600480
TYPICAL TRANSOMTO MULLION CONNECTION
V1
H1
apexfacades.com 1.2 Pinnacle Pg- 8
Printed on 12/12/17
101,6[4"]
25 ,4[1"]
85° 85°
152,4[6"]
12,7 [1/2"]
12,7[1/2"]
95°
101,6 [4"]
25,4
[1"]
152,4 [6"]
63,5[2 1/2"]
170°÷180°
170°÷180°
63,5[2 1/2"]
H2
H3
H2
H3
Pinnacle 600
600140 REINFORCING, IF NECESSARY
600010
600240
600220 600480 H2
H3
apexfacades.com 1.2 Pinnacle Pg- 9
Printed on 12/12/17
63,5[2 1/2"]
63,5
[2 1/2
"]
12,7
[1/2"
]
25,4[1"]
101,6[4"]
152,4[6"]
101,6 [4"
]25
,4[1"
]15
2,4 [6"]
133,4[5 1/4"]
30[1 3/16"]
H4
V4
V4
H4
Pinnacle 600
600010
600240
600220 600480
6000140-A
600050
TYPICAL TRANSOMTO MULLION CONNECTION
H4
V4
apexfacades.com 1.2 Pinnacle Pg- 10
Printed on 12/12/17
63,5[2 1/2"]
63,5
[2 1/2
"]
12,7
[1/2"
]
25,4[1"]
101,6[4"]
133,4[5 1/4"]
101,6 [4"
]25
,4[1"
]13
3,4[5
1/4"]
30[1 3/16"]
12,7[1/2"]
15,8[5/8"] BITE
H5
H5
V5
V5
Pinnacle 600
600050
6000140-A
600050
4-SIDE STRUCTURAL GLAZINGISOMETRIC VIEW
V5
H5
apexfacades.com 1.2 Pinnacle Pg- 11
Printed on 12/12/17
63,5[2 1/2"]
63,5
[2 1/2
"]29
[1 1/8
"]
152,4 [6"
]
25,4
[1"]
63,5
[2 1/2
"]
52,3[2 1/16"]
152,4[6"]
12,7
[1/2"
]
63,5
[2 1/2
"]
52,3
[2 1/1
6"]
H6
V6
H6
V6
Pinnacle 600
VENT
VENT
V6
H6
apexfacades.com 1.2 Pinnacle Pg- 12
Printed on 12/12/17
152,4 [6"
]10
1,6 [4"]
25,4
[1"]
63,5
[2 1/2
"]25
,4[1"
]3,2 [1/
8"]
3,2 [1/8"]
39,2 [1 17/32"]
50,8[2"]
98,4
[3 7/8
"]
25,4 [1"]
15,9[5/8"]
15,9
[5/8"
]
V7
H7
Pinnacle 600
6000180
MULLION - DOOR ADAPTOR
DOOR ADAPTORISOMETRIC VIEW
TRANSOM - DOOR ADAPTOR
600010
H7
V7
apexfacades.com 1.2 Pinnacle Pg- 13
Printed on 12/12/17
61
3/
,5[2 2"]
153,2
[6 1/3
2"]
91,5
[3 19
/32"]
91,5[3 19/32"]
101,6 [4"
]25
,4[1"
]
45°
6,3[1/4"]H9
Pinnacle 600
600060
TYPICAL TRANSOMTO MULLION CONNECTION
90° CORNER MULLION6" O.A. SYSTEM DEPTH
600220
600250H9
apexfacades.com 1.2 Pinnacle Pg- 14
Printed on 12/12/17
127
[5"]
45°
177,8 [7"
]
177,8[7"]
25,4
[1"]
127[5"]
25,4[1"]
H10
Pinnacle 600
6000070
90° CORNER MULLION7" O.A. SYSTEM DEPTH
600220
600250
H10
apexfacades.com 1.2 Pinnacle Pg- 15
Printed on 12/12/17
127
[5"]
45°
2/
28
,5[7"] 25,9
[1 1/32"] MAX. BITE
158,8
[6 1/4
"]
15,9
[5/8"
]
25,4
[1"]
127
[5"]
158,8
[6 1/4
"]
[R1/ ]R122
,7"
25,4
[1"]
61
3/
,5[2 2"]
19[3/4"]
18[23/32"]
H12
H11
Pinnacle 600
90° CORNER MULLION6 1/4" O.A. SYSTEM DEPTH
600080
-90 °CORNER MULLION6 1/4" O.A. SYSTEM DEPTH
600090
H11
H12
apexfacades.com 1.2 Pinnacle Pg- 16
Printed on 12/12/17
127
[5"]
158,8
[6 1/4
" ]
25,4
[1"]
)
15,9
13(
51
°2
5
N°-
O1
M4
I5
N°
AL
[5/8"] MAX. BITE
25
3,5[1/ 16"]
9,5[3/8"]
H13
Pinnacle 600
600100
135° CORNER MULLION6 1/4" O.A. SYSTEM DEPTHH13
apexfacades.com 1.2 Pinnacle Pg- 17
Printed on 12/12/17
30,2 [1 3/16"]
30,2[1 3/16"]
63,5[2 1/2"]
153,3[6 1/32"]
101,6[4"]
25,4[1"]
63,5
[2 1/2
"]
34,9
[1 3/8
"]
H14
V8
54,2
[2 1/8
"]
63,5[2 1/2"]
25,4[1"]
101,6 [4"
]25
,4[1"
]15
2,4 [6"]
ISOMETRIC VIEW
Pinnacle 650
SPLIT-MULLIONH16
V8
600145 REINFORCING, IF NECESSARY
650110
450270
650120
3"x3/8" STL BAR, IF NECESSARY, E.G.
600010
600480600220
600240
apexfacades.com 1.2 Pinnacle Pg- 18
Printed on 12/12/17
V9
H15 V10
63,5[2 1/2"]
9,5 [3/8"
]
6,4 [1/4"
]
153,3[6 1/32"]
101,6[4"]
25,4[1"]
4[5/
32"]¯ 8
[¯5/1
6"]38
,1[1
1/2"]
¯ 6,4[¯ 1/4"]
Pinnacle 650
V10
V9
H15
SPANDREL DRAINAGE
600010
650110
650120
GALV. STL BACKPAN WITH MINERAL WOOL INSULATION
600480600220
600240
SPANDRELDRAINAGE
apexfacades.com 1.2 Pinnacle Pg- 19
Printed on 12/12/17
30,2 [1 3/16"]
30,2[1 3/16"]
63,5[2 1/2"]
H16
V11
101,6 [4"
]25
,4[1"
]15
2,4 [6"]
25,4[1"]
101,6[4"]
152,4
19,1
[3/4"
]12
,6[1/
2"] B
ITE,
TYP
.
[6"]
ISOMETRIC VIEW
Pinnacle 650
H16
V11 TRANSOM, 2SSG OPTION - VERTICAL CAPS
SILICONE & BACKER ROD
600340
600220
600240 SPLIT-MULLION, 2SSGOPTION - VERTICAL CAPS
600480
600145 REINFORCING,IF NECESSARY
650110
450270
650120
3"x3/8" STL BAR, IF NECESSARY, E.G.
apexfacades.com 1.2 Pinnacle Pg- 20
Printed on 12/12/17
63,5[2 1/2"]
19,1[3/4"]
12,6[1/2"] BITE, TYP.
152,4 [6"]
133,4[5 1/4"]
101,6[4"]
25,4[1"]
ISOMETRIC VIEW
H17
V12
Pinnacle 650
650110650130
H17 SPLIT-MULLION, 2SSGOPTION - HORIZONTAL CAPS
V12 TRANSOM, 2SSG OPTION -HORIZONTAL CAPS
600010
apexfacades.com 1.2 Pinnacle Pg- 21
Printed on 12/12/17
25,4[1"]
101,6[4"]
133,4[5 1/4"]
63,5[2 1/2"]
19,1[3/4"]
12,6[1/2"]
19,1
[3/4"
]
¯ 8 [¯
5/16"]
¯ 6/
,4
4
[¯ 1 "]
ISOMETRIC VIEW
V13
H18
Pinnacle 650
H18 SPLIT-MULLION, 4SSGOPTION - HORIZONTAL CAPS
V13 TRANSOM, 4SSG OPTION -HORIZONTAL CAPS
PA 6.6 THERMAL SPACER
650610 WEATHERSEAL GASKET
600050
SPANDRELDRAINAGE
650110650130
600050
apexfacades.com 1.2 Pinnacle Pg- 22
Printed on 12/12/17
FABRICATION DETAILS
apexfacades.com 1.2 Pinnacle Pg- 23
Printed on 12/12/17
89,0°
12,2±0,3 [15/32±0"]
30,2[1 3/16"]
88,9
[3 1
/2"]
88,9
[3 1
/2"]
30,2
[1 3
/16"]
12,2±
0,3 [1
5/32±
0"]
22,2 [7/8"]
58[2 9/32"]
89,0°
12,7±0,3 [1/2±0"]
30,2[1 3/16"]
114,3
[4 1
/2"]
30,2
[1 3
/16"]
12,2±
0,3[15
/32±0
"]
22,2 [7/8"]
58[2 9/32"]
R2R2
[R3/3
2"]
58
[R3/3
2"]
[2 9/32"]
114,3
[4 1/2
"]
58[2 9/32"]
Fabrication DetailsPinnacle 600
600170-A
600160-A
apexfacades.com 1.2 Pinnacle Pg- 24
Printed on 12/12/17
89,0°
12,2±0,3 [15/32±0"]
30,2[1 3/16"]
139,7
[5 1
/2"]
30,2
[1 3
/16"]
12,2±
0,3 [1
5/32±
0"]
22,2 [7/8"]
58[2 9/32"]
R2 [R
3/32"]
139,7
[5 1/2
"]
58[2 9/32"]
R2,5
R6
[R3/32"]
[R1/4"]
48,5 0
[-0,5 0"
1 29/32 32"]-1/
23,6[15/16"]
139,1
[5 1
5/32
"]
30,2
[1 3/1
6"]
38,1
[1 1/2
"]38
,1[1
1/2"]
46,0°
Pinnacle 600
600400-A
600180-A
apexfacades.com 1.2 Pinnacle Pg- 25
Printed on 12/12/17
89,0°
12,2±0,3 [15/32±0"]
30,2[1 3/16"]
165,1
[6 1
/2"]
30,2
[1 3/1
6"]
12,2±
0,3[15
/32±0
"]
22,2 [7/8"]
58[2 9/32"]
R2 [R
3/32"]
165,1
[6 1/2
"]
58[2 9/32"]
Pinnacle 600
600170-A
apexfacades.com 1.2 Pinnacle Pg- 26
Printed on 12/12/17
22,2
[7/8"
]20
,6[13
/16"]
63,5
[2 1/2
"]63
,5[2
1/2"]
22,2
[7/8"
]20
,6[13
/16"]
101,6[4"]
116,6[4 19/32"]
63,5
[2 1/2
" ]63
,5[2
1/2"]
101,6[4"]
12,7-0
[+0,5
1/2+1/32"]-0"
12,7
[+0,5-0
1/2+1/32"]-0"
12,7
[+0,5-0
1/2+1/32"-0" ]
12,7
[-0+0,5
1/2+1/32"-0" ]
(4) 3
/Ø
15
[Ø6"]
(4) 3
/Ø
15
[Ø6"]
Pinnacle 600
600010
600050
LENGTH
LENGTH
apexfacades.com 1.2 Pinnacle Pg- 27
Printed on 12/12/17
101,6[4"]
116,6[4 19/32"]
63,5[2 1/2"]
45°
22,2[7/8"]
20,6[13/16"]
12,7
[-0 +0,5
1/2 +1/32"-0" ]
31,8[1 1/4"]
15[19/32"]
116,6[4 19/32"]
(4)3 /
Ø1 5
[Ø6"]
Pinnacle 600
LENGTH
LENGTH
apexfacades.com 1.2 Pinnacle Pg- 28
Printed on 12/12/17
Pinnacle 600 Series Curtain Wall Thermal Chart
SIMULATION METHOD:
SIMULATION SIZE:
ANSI/NFRC 100, Procedure for Determining FenestrationProduct U-Factors (2014)ANSI/NFRC 200, Procedure for Determining Fenestration Product Solar Heat Gain Coefficients at Normal Incidence (2014)NFRC 500, Procedure for Determining Fenestration ProductCondensation Resistance Values (2014)Technical Interpretation Manual (2010)
2000mm x 2000mm (79in in x 79in)
NFRC THERMAL SIMULATION CHART
PINNACLE 600 CURTAIN WALL
apexfacades.com 1.2 Pinnacle Pg- 29
Printed on 12/12/17
Windload & Deadload Charts Pinnacle 600
PINNACLE 600010 CHARTS
1) 600010 Single Span Chart
2) 600010 Single Span
+ Sleeve Chart
3) 600010 Single Span +
Sleeve + Steel Reinforcing Chart
4) 600010 Single Span
+ Steel Reinforcing Chart
5) 600010 Double Span
6) 600010 Double Span +
Sleeve Chart
7) 600010 Double Span +
Sleeve & Steel Reinforcing Chart
8) 600010 Double Span
+ Steel Reinforcing Chart
PINNACLE 600020 CHARTS
1) 600020 Single Span Chart
2) 600020 Single Span
+ Sleeve Chart
3) 600020 Single Span +
Sleeve + Steel Reinforcing Chart
4) 600020 Single Span
+ Steel Reinforcing Chart
5) 600020 Double Span
6) 600020 Double Span +
Sleeve Chart
7) 600020 Double Span +
Sleeve & Steel Reinforcing Chart
8) 600020 Double Span
+ Steel Reinforcing Chart
PINNACLE 600030 CHARTS
1) 600030 Single Span Chart
2) 600030 Single Span
+ Sleeve Chart
3) 600030 Single Span +
Sleeve + Steel Reinforcing Chart
4) 600030 Single Span
+ Steel Reinforcing Chart
5) 600030 Double Span
6) 600030 Double Span +
Sleeve Chart
7) 600030 Double Span +
Sleeve & Steel Reinforcing Chart
8) 600030 Double Span
+ Steel Reinforcing Chart
PINNACLE 600040 CHARTS
1) 600040 Single Span Chart
2) 600040 Single Span
+ Sleeve Chart
3) 600040 Single Span +
Sleeve + Steel Reinforcing Chart
4) 600040 Single Span
+ Steel Reinforcing Chart
5) 600040 Double Span
6) 600040 Double Span +
Sleeve Chart
7) 600040 Double Span +
Sleeve & Steel Reinforcing Chart
8) 600040 Double Span
+ Steel Reinforcing Chart
WINDLOAD & DEADLOAD CHARTSTABLE OF CONTENTS
WINDLOAD CHARTS WINDLOAD CHARTS
WINDLOAD CHARTS WINDLOAD CHARTS
apexfacades.com 1.2 Pinnacle Pg- 30
Printed on 12/12/17
Windload & Deadload Charts Pinnacle 600
PINNACLE 600052 CHARTS
1) 600052 Single Span Chart
2) 600052 Single Span
+ Sleeve Chart
3) 600052 Single Span +
Sleeve + Steel Reinforcing Chart
4) 600052 Single Span
+ Steel Reinforcing Chart
5) 600052 Double Span
6) 600052 Double Span +
Sleeve Chart
7) 600052 Double Span +
Sleeve & Steel Reinforcing Chart
8) 600052 Double Span
+ Steel Reinforcing Chart
PINNACLE 600054 CHARTS
1) 600054 Single Span Chart
2) 600054 Single Span
+ Sleeve Chart
3) 600054 Single Span +
Sleeve + Steel Reinforcing Chart
4) 600054 Single Span
+ Steel Reinforcing Chart
5) 600054 Double Span
6) 600054 Double Span +
Sleeve Chart
7) 600054 Double Span +
Sleeve & Steel Reinforcing Chart
8) 600054 Double Span
+ Steel Reinforcing Chart
PINNACLE DEADLOAD CHARTS
1) 600006 Dead Load Chart
2) 600010 Dead Load Chart
3) 600020 Dead Load Chart
4) 600030 Dead Load Chart
5) 600040 Dead Load Span
6) 600050 Dead Load Chart
7) 600051 Dead Load Chart
8) 600052 Dead Load Chart
9) 600054 Dead Load Chart
PINNACLE 600050 CHARTS
1) 600050 Single Span Chart
2) 600050 Single Span
+ Sleeve Chart
3) 600050 Single Span +
Sleeve + Steel Reinforcing Chart
4) 600050 Single Span
+ Steel Reinforcing Chart
5) 600050 Double Span
6) 600050 Double Span +
Sleeve Chart
7) 600050 Double Span +
Sleeve & Steel Reinforcing Chart
8) 600050 Double Span
+ Steel Reinforcing Chart
PINNACLE 600051 CHARTS
1) 600051 Single Span Chart
2) 600051 Single Span
+ Sleeve Chart
3) 600051 Single Span +
Sleeve + Steel Reinforcing Chart
4) 600051 Single Span
+ Steel Reinforcing Chart
5) 600051 Double Span
6) 600051 Double Span +
Sleeve Chart
7) 600051 Double Span +
Sleeve & Steel Reinforcing Chart
8) 600051 Double Span
+ Steel Reinforcing Chart
WINDLOAD CHARTS WINDLOAD CHARTS
WINDLOAD CHARTS WINDLOAD CHARTS
apexfacades.com 1.2 Pinnacle Pg- 31
Printed on 12/12/17
600010 SINGLE SPAN WINDLOAD CHART MULLION SECTION
Windload ChartsPinnacle 600
GENERAL NOTES
WINDLOAD Pages 52-84CHARTS
1. Assume horizontal members (if any) provide lateral support for seismic loads.
2. Steel reinforcing inertia value expressed in aluminum for total inertia value ( i.e. steel value is factored by ratio of steel/aluminum modules values).
3. Deflection requirements comply with S157 - 05/S157.1-05 and AAMA TIR-A11-2015. Deflection Limit - L/175.(Note: to convert to L/240 + 1/4" deflection limit when H> 13.5 ft., multiply mullion spacing by k = 0.73 + 7.3/H, where H - mullion height in ft.)
4. Mullion freely supported at ends.
5. Value of mullion includes back section and nosing
6. All reinforcing shown in these charts considered that it is mechanically fastened to the aluminum extrusion. Fastening requirements to be reviewed and approved by Engineer.
DEADLOAD Pages 84-88CHARTS
1. Deflection requirements comply with S157 - 05/S157.1-05 and AAMA TIR-A11-2015. Deflection Limit - 1/8".
2. Transom freely supported at ends with setting blocks at 1/4 or 1/8 of transom length or 6".
3. Glass unit - 6mm / 6 mm.
*Charts are based on deflection analysis only and considered for estimation purposes only. Designer has to take necessary steps to make appropriate engineering calculations as per applicable Building Codes and regulations for complete design, i.e. stress, slenderness, local buckling.
apexfacades.com 1.2 Pinnacle Pg- 32
Printed on 12/12/17
MULLION SECTION
MULLION SECTION
Windload ChartsPinnacle 600
600010 SINGLE SPAN +SLEEVE WINDLOAD CHART
600010 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 33
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600010 SINGLE SPAN +SLEEVE REINFORCING WINDLOAD CHART
600010 DOUBLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 34
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600010 DOUBLE SPAN +SLEEVE WINDLOAD CHART
600010 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 35
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600010 DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART
600020 SINGLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 36
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600020 SINGLE SPAN +SLEEVE WINDLOAD CHART
600020 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 37
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600020 SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART
600020 DOUBLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 38
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600020 DOUBLE SPAN +SLEEVE WINDLOAD CHART
600020 DOUBLE SPAN + SLEEVE + STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 39
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600020 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART
600030 SINGLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 40
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600030 SINGLE SPAN +SLEEVE WINDLOAD CHART
600030 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 41
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600030 SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART
600030 DOUBLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 42
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600030 DOUBLE SPAN + SLEEVE WINDLOAD CHART
600030 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 43
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600030 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART
600040 SINGLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 44
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600040 SINGLE SPAN +SLEEVE WINDLOAD CHART
600040 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 45
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600040 SINGLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART
600040 DOUBLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 46
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600040 DOUBLE SPAN +SLEEVE WINDLOAD CHART
600040 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 47
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600040 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART
600050 SINGLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 48
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600050 SINGLE SPAN +SLEEVE WINDLOAD CHART
600050 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 49
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600050 DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART
600050 DOUBLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 50
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600050 DOUBLE SPAN +SLEEVE WINDLOAD CHART
600050 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 51
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600050 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART
600051 SINGLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 52
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600051 SINGLE SPAN +SLEEVE WINDLOAD CHART
600051 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 53
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600051 SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART
600051 DOUBLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 54
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600051 DOUBLE SPAN +SLEEVE WINDLOAD CHART
600051 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 55
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600051 DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART
600052 SINGLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 56
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600052 SINGLE SPAN +SLEEVE WINDLOAD CHART
600052 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 57
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600052 SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART
600052 DOUBLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 58
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600052 DOUBLE SPAN +SLEEVE WINDLOAD CHART
600052 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 59
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600052 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART
600054 SINGLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 60
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600054 SINGLE SPAN +SLEEVE WINDLOAD CHART
600054 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 61
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600054 SINGLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART
600054 DOUBLE SPAN WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 62
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600054 DOUBLE SPAN +SLEEVE WINDLOAD CHART
600054 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 63
Printed on 12/12/17
Windload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600054 DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART
600006 DOUBLE SPAN DEADLOAD CHART
DEADLOAD CHARTSPINNACLE 600
apexfacades.com 1.2 Pinnacle Pg- 64
Printed on 12/12/17
Deadload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600010 DEADLOAD CHART
600020 DEADLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 65
Printed on 12/12/17
Deadload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600030 DEADLOAD CHART
600040 DEADLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 66
Printed on 12/12/17
Deadload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600050 DEADLOAD CHART
600051 DEADLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 67
Printed on 12/12/17
Deadload ChartsPinnacle 600
MULLION SECTION
MULLION SECTION
600052 DEADLOAD CHART
600054 DEADLOAD CHART
apexfacades.com 1.2 Pinnacle Pg- 68
Printed on 12/12/17
apexfacades.com 1.2 Pinnacle Pg- 69
Printed on 12/12/17
PARTS LIST
apexfacades.com 1.2 Pinnacle Pg- 70
Printed on 12/12/17
Parts ListPinnacle 600
PART # CROSS SECTION DESCRIPTION NOTES
600010 2.5" x 4" (63mm X 102mm) Mullion (6" [152mm] O.A. System Depth)
Ixx in4: 4.400 (mm4: 1,831,300)Iyy in4: 1.561 (mm4: 649,737)
Standard Length 289" (7341mm)
600020 2.5" x 5" (63mm X 127mm) Mullion(7" [178mm] O.A. System Depth)
Ixx in4: 7.400 (mm4: 3,080,162)Iyy in4: 1.845 (mm4: 767,945)
Standard Length 289" (7341mm)
600030 2.5" x 6" (63mm X 152mm) Mullion(8" [203mm] O.A. System Depth)
Ixx in4: 10.504 (mm4: 4,732,260)Iyy in4: 2.129 (mm4: 886,153)
Standard Length 289" (7341mm)
apexfacades.com 1.2 Pinnacle Pg- 71
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600040 2.5" x 7" (63mm X 178mm) Mullion(9" [229mm] O.A. System Depth)
Ixx in4: 16.406 (mm4: 6,828,650)Iyy in4: 2.413 (mm4: 1,004,361)
Standard Length 289" (7341mm)
600054 2.5" x 7" (63mm X 178mm) Mullion SSG(8.25" [209mm] O.A. System Depth)
Ixx in4: 14.159 (mm4: 5,893,427)Iyy in4: 2.413 (mm4: 1,004,203)
Standard Length 289" (7341mm)
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 72
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600050 2.5" x 4" (63mm X 102mm) Mullion SSG(5.25" [133mm] O.A. System Depth)
Ixx in4: 3.613 (mm4: 1,504,009)Iyy in4: 1.561 (mm4: 649,579)
Standard Length 289" (7341mm)
600051 2.5" x 5" (63mm X 127mm) Mullion SSG(6.25" [159mm] O.A. System Depth)
Ixx in4: 6.212 (mm4: 2,585,628)Iyy in4: 1.845 (mm4: 767,787)
Standard Length 289" (7341mm)
600052 2.5" x 6" (63mm X 152mm) Mullion SSG(7.25" [184mm] O.A. System Depth
Ixx in4: 9.694 (mm4: 4,035,107)Iyy in4: 2.129 (mm4: 885,995)
Standard Length 289" (7341mm)
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 73
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600060 90° Corner Mullion 2.5"x7" (63mm X 178mm)(6" [152mm] O.A. System Depth)
Ixx in4: 13.134 (mm4: 5,466,786)Iyy in4: 2.191 (mm4: 911,873)
Standard Length 289" (7341mm)
600070 90° Corner Mullion 2.5" x 8.5" (63mm X 216mm)(7" [178mm] O.A. System Depth)
Ixx in4: 21.610 (mm4: 8,994,954)Iyy in4: 2.592 (mm4: 1,079,046)
Standard Length 289" (7341mm)
90°
90°
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 74
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600080 90° Outside Corner Mullion 2.5" x 8" (63mm X 203mm) SSG(6.25" [159mm] O.A. System Depth)
Ixx in4: 16.781 (mm4: 6,984,677)Iyy in4: 2.496 (mm4: 1,038,738)
Standard Length 289" (7341mm)
600090 90° Inside Corner Mullion 2.5" x 8" (63mm X 203mm) SSG (6.25" [159mm] O.A. System Depth)
Ixx in4: 14.163 (mm4: 5,894,930)Iyy in4: 2.390 (mm4: 994,907)
Standard Length 289" (7341mm)
90°
90°
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 75
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600100 135° Mullion 2.5" x 7" (63mm X 178mm) SSG(6.25" [159mm] O.A. System Depth)
Ixx in4: 7.917 (mm4: 3,295,408)Iyy in4: 1.945 (mm4: 809,622)
Standard Length 289" (7341mm)
Range of 125 degree to 145 degree can be achieved
600006 2.5" x 2.5" (63mm X 63mm) Mullion(4.5" [114mm] O.A. System Depth)
Ixx in4: 1.500 (mm4: 624,148)Iyy in4: 1.135 (mm4: 472,425)
Standard Length 289" (7341mm)
600004 2.5" x 1" (63mm X 25mm) Mullion(Veneer)(3" [76mm] O.A. System Depth)Ixx in4: 0.455 (mm4: 189,530)Iyy in4: 0.170 (mm4: 70,925)
Standard Length 289" (7341mm)
600005 2.5" x 1" (63mm X 25mm) Open Back Mullion (Veneer)(3" [76mm] O.A. System Depth)Ixx in4: 0.480 (mm4: 199,624)Iyy in 4: 0.113 (mm4: 47,024)
Standard Length 289" (7341mm)
135°
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 76
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
650110 2.5" x 4" (63mm X 102mm) Split-Mullion,Male.(6" [152mm] O.A. System Depth for Captured Glazing)(5.25" [133mm] O.A. System Depth for SSG)
Ixx in4: 1.594 (mm4: 663,347)Iyy in4: 0.098 (mm4: 40,853)
Standard Length 289" (7341mm)
650120 2.5" x 4" (63mm X 102mm) Split-Mullion, Female for Captured Glazing(6" [152mm] O.A. System Depth)
Ixx in4: 2.637 (mm4: 1,097,480)Iyy in4: 0.261 (mm4: 108,541)
Standard Length 189" (7341mm)
650130 2.5" x 4" (63mm X102mm) Split-Mullion,Female for SSG(5.25" [133mm] O.A. System Depth)
Ixx in4: 2.084 (mm4: 867,345)Iyy in4: 0.218 (mm4: 90,563)
Standard Length 289" (7341mm)
Parts ListPinnacle 650
apexfacades.com 1.2 Pinnacle Pg- 77
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
650112 2.5" x 5" (63mm X 127mm) Split-Mullion,Male.(7" [178mm] O.A. System Depth Captured Glazing)(6.25" [159mm] O.A. System Depth SSG)
Ixx in4: 2.783 (mm4: 1,158,305)Iyy in4: 0.104 (mm4: 43,467)
Standard Length 289" (7341mm)
650122 2.5" x 5" (63mm X 127mm) Split-Mullion,Female for Captured Glazing(7" [178mm] O.A. System Depth)
Ixx in4: 4.410 (mm4: 1,835,785)Iyy in4: 0.287 (mm4: 119,387)
Standard Length 289" (7341mm)
650132 2.5" x 5" (63mm X 127mm) Split-Mullion,Female for SSG (6.25" [159mm] O.A. System Depth)
Ixx in4: 3.583 (mm4: 1,491,296)Iyy in4: 0.235 (mm4: 97,709)
Standard Length 289" (7341mm)
Parts ListPinnacle 650
apexfacades.com 1.2 Pinnacle Pg- 78
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600140 3.5" (89mm) Reinforcing Sleeve for 4" (102mm) Mullion(6" [152mm] O.A. System Depth)
Standard Length 289" (7341mm)Mill Finish
600150 4.5" (114mm) Reinforcing Sleeve for 5" (127mm) Mullion(7" [178mm] O.A. System Depth)
Standard Length 289" (7341mm)Mill Finish
600160 5.5" (140mm) Reinforcing Sleeve for 6" (152mm) Mullion(8" [203mm] O.A. System Depth)
Standard Length 289" (7341mm)Mill Finish
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 79
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600170 6.5" (165mm) Reinforcing Sleeve for 7" (178mm) Mullion(9" [229mm] O.A. System Depth)
Standard Length 289" (7341mm)Mill Finish
650145 Alignment Sleeve for 4" (102mm) Split-Mullion(6" [152mm] O.A. System Depth)
Standard Length 289" (7341mm)Mill Finish
650155 Alignment Sleeve for 6" (152mm) Split-Mullion(7" [178mm] O.A. System Depth)
Standard Length 289" (7341mm)Mill Finish
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 80
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600180 Thermally Broken Door Adaptor, Regular
Ixx in4: 2.256 (mm4: 938,990)Iyy in4: 0.310 (mm4: 128,921)
Standard Length 262" (6655mm)
Adaptor for use with Pinnacle 600/650 and Keystome 500/550 Curtainwall.
Available in split finish
See Detail page 33
600190 Thermally Broken Door Adaptor, Wide
Ixx in4: 2.671 (mm4: 1,111,855)Iyy in4: 0.628 (mm4: 261,230)
Standard length 262" (6655mm)
Integrates door into Pinnacle 600/650 and Keystone 500/550 curtain wall, with 1" IGU glazing.
Recommended for use with electric strikes.
Available in split finish
600200 Slimline Door Adaptor Standard Length 262" (6655mm)
600210 Slimline Door Adaptor Cap Standard Length 262" (6655mm)
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 81
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600220 2.5" (63mm) Pressure Plate - Regular Duty Standard Length 289" (7341mm)Mill Finish
Prepunched with 0.275" (7mm) holes at 8" (203mm) on center
600240 2.5" (63mm) Standard Cap .625" (16mm) Height
Standard Length 289" (7341mm)
600250 2.5" (63mm) Corner Cap .625" (16mm) Height
Standard Length 289" (7341mm)
600260 2.5" (63mm) Transom Cap .5" (12mm) Height, (Optional)
Standard Length 289" (7341mm)
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 82
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600270 2.5" (63mm) Raised Profile Cap .875" (22mm) Height(Optional)
Standard Length 289" (7341mm)
600290 Optional Jamb Adaptor for 1" (25mm) IG Unit
Standard Length 289" (7341mm)Optional High Performance application.For use with pvc Jamb Adaptor part number 600520
600291 Glazing Adaptor for 0.25" (6mm) Glazing Standard Length 289" (7341mm)
600292 Perimeter Flange Adaptor Standard Length 289" (7341mm)
Thermally Improved profile
600300 Windload Bracket - Lineal Standard Length 144" (3658mm)Mill Finish2.5" (63mm) sightline system
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 83
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600310 0.250" (6mm) Serrated Washer - Lineal
Fabricated and punched to Customer Require-mentsMill Finish
600320 Dead Load Bracket - Lineal Standard Length 144" (3658mm)Mill Finish
600140-A 3.5" (89mm) Shear Block for 4" (102mm) Mullion(6" [152mm] O.A. System Depth)
Standard Length 1.18" (30mm)Mill FinishTransom-to-mullionconnection
Fabricated with installa-tion holes
600150-A 4.5" (114mm) Shear Block for 5" (127mm) Mullion(7" [178mm] O.A. System Depth)
Standard Length 1.18" (30mm)Mill FinishTransom-to-mullionconnection
Fabricated with installa-tion holes
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 84
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600160-A 5.5" (140mm) Shear Block for 6" (152mm) Mullion(8" [203mm] O.A. System Depth)
Standard Length 1.18" (30mm)Mill FinishTransom-to-mullionconnection
Fabricated with installation holes
600170-A 6.5" (165mm) Shear Block for 7" (178mm) Mullion(9" [229mm] O.A. System Depth)
Standard Length 1.18" (30mm)Mill FinishTransom-to-mullionconnection
Fabricated with installation holes
600400-A Shear Block For Corner Mullions
Standard Length 1.5625" (40mm)Mill Finish For Transom-to-cornermullion connections
Fabricated with installation holesSee Architectural Details in this section
600410-A 1.65" (20mm) Corner Key
Mill Finish. For Thermally Broken Door Adaptor, Regular corner connection part number 600180.1 pc. per connection
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 85
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600410-B 1.65" (42mm) Corner Key
Mill Finish. For Thermally Broken Door Adaptor, Wide corner connection part number 600190. 2 pcs. per connection
600430-A 1.77" (45mm) Corner Key
Mill Finish. For Thermally Broken Door Adaptor, Regular corner connection part number 600180. 1 pc. per connection
600460-A Setting Block Chair for 1.75" (44mm) Triple IG GlazingCaptured
Standard Length 4" (102mm)Mill Finish0.5" (12mm) Bite
600470-A Setting Block Chair for 1.75" (44mm) Triple IG GlazingSSG
Standard Length 4" (102mm)Mill Finish0.875" (22mm) Bite
600330-A Setting Block Chair for 1" (25mm) Double IG GlazingCaptured
Standard Length 4" (102mm)Mill Finish0.5" (12mm) Bite
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 86
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
600335-A Setting Block Chair for 1" (25mm) Double IG Glazing SSG
Standard Length 4" (102mm)Mill Finish0.875" (22mm) glazing bite,0.75" (19mm) silicone weather bead
600350-A Setting Block Chair for 1" (25mm) Double IG Glazing SSG
Standard Length 4" (102mm)Mill Finish1" (25mm) glazing bite,0.5" (12mm) weather bead
600190-A Sheer Block - Veneer Standard Length 1.18" (30mm)Mill FinishFabricated with 2 fastening holesFor use with 2.5"X2.5" (63mmX-63mm) Mullion part number 600006, 2.5" X 1" (63mm X 25mm) Mullion (Veneer) part number 600004 and 2.5" X 1" (63mm X 25mm) Open Back Mullion (Veneer) part number 600005
600480 Efficiency Plus Thermal Break for 1" (25mm) Double Glazing
Standard Length 288" (7315mm)Black Polyamide
600510 Efficiency Plus 3 Thermal Break for 1.75" (44mm) Triple Glazing
Standard Length 288" (7315mm)Black Polyamide
600520 Jamb Adaptor Thermal Break for 1.75" (44mm) Triple Glazing
Standard Length 288" (7315mm)Black PVCFor use with Optional Jamb Adaptor part number 600290
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 87
Printed on 12/12/17
PART # CROSS SECTION DESCRIPTION NOTES
450270 #10-1 1/2" Pan Head Zinc PlatedSelf-Tapping Screw, Robertson Drive
Shear block-to-mullion, mullion-to-transom attachment Unit: 100 piece
200310 #10-1/2" SS (18-8) Pan Head Self-Tapping Screw, Robertson Drive
Attachment of Door Stop Base part number 200165 to MullionAttachment of Transom 450050 to Mullion 45010 via Shear Block 450110 Unit: 100 piece
600525 #10-5/8" SS (18-8) Pan Head Self-Tapping Screw, Robertson Drive
Attachment of Transom to MullionUnit: 100 piece
600535 Ø1/4-20 X 1 1/2" Long SS (18-8) Robertson Drive Screw - Self Tap tip
Attachment of Pressure Plate 1" (25mm) IG UnitUnit: piece
600537 Ø1/4-20 X 2.25" LONG SS (18-8) Robertson Drive Screw - Self Tap tip
Attachment of Pressure Plate 1 3/4" (44mm) IG UnitUnit: piece
600560 #10-7/8" PAN Head Zinc-PlatedSelf-Drilling Screw,
Attachment of vent frame into the curtain wall
600565 Captured Glazing Interior Gasket Material/Duro: EPDM/70Color: BlackUnit: Roll 200 Feet (61M)
600570 2 or 4 Sided SSG Glazing Gasket Material/Duro: Silicone/70Color: BlackUnit: Roll 250 Feet (76M)
600580 High Performance 3-in-1 Exterior Glazing Gasket
Material/Duro: EPDM/70Color: BlackUnit: Reel 100 Feet (30M)For use with 2.5" (63mm) pressure plate
600581 Standard Pressure Plate Gasket at Edges
Material/Duro: EDPM/70 Color: Black Unit: Roll 200 Feet (61M) For use Pressure Plate 600220 at edges
600582 Standard Pressure Plate Gasket at Center
Material/Duro: EDPM/70 Color: Black Unit: Roll 200 Feet (61M) For use Pressure Plate 600220 at center
Parts ListPinnacle 600
apexfacades.com 1.2 Pinnacle Pg- 88
Printed on 12/12/17
650600 Main Seal Gasket Split Mullion Material/Duro: Silicone EDPM/70 Color: Black/Lubricated Unit: Roll 150 Feet (46M)
650610 Weather Seal Gasket, SSG Material/Duro: Silicone EDPM/70 Color: Black Unit: Roll 150 Feet (46M)
600590 1/4" x 1 1/4" (6mm X 32mm) Setting Block, 4" (102mm) Long, SSG Glazing
Material/Duro: Silicone/80Color: BlackUnit: pc.
600585 1/8" X 1 1/4" (3mm X 32mm) Setting Block, 4" (102mm) Long, Captured Glazing
Material/Duro: Silicone/80Color: BlackUnit: pc. for use with captured glazing with 1/2" (12mm) bite in Keystone 500/550 and Pinnacle 600/650
200240 Pile Weatherstripping, 5/16" (8mm) Height
Material: Fiber Pile with FinColor: GreyUnit: Reel 1000 Feet (305M)For use with Standard Door Stops
200260 High Performance Threshold Bulb Seal
Material/Duro: TPEColor: BlackUnit: Reel 500 Feet (152M)For use at Latch Threshold
600630 1/4" X 1 3/4" (6mm X 44mm)Setting Block, 4" (102mm) Long
Material/Duro: Silicone/85Color: BlackUnit: pc.For use with 1.750" (44mm) Triple Glazing SSG
600650 1/4" X 1 3/4" (3mm X 44mm)Setting Block, 4" (102mm) Long
Material/Duro: Silicone/85Color: BlackUnit: pc.For use with 1.750" (44mm) Triple Glazing Captured
Parts ListPinnacle 600