pillar fire hydrant saphir silver series a1 62

Pillar Fire Hydrant SAPHIR SILVER Series A1 62

BAYARD - Series A1 62 - T19017-EN

2

1 - Information

1 - 1. Applications :

• Non-freezing pillar fire hydrant with apparent outlets SAPHIR for connection

above ground of the mobile equipment of fire protection services on a

network under pressure.

• SAPHIR: Traffic type and non Traffic type Series A1 62.

• Public or private firefighting networks, under permanent pressure

or on request.

• For suction facilities, refer to our Intake Hydrants series A1 94 or A1 95.

1 - 2. Features:

• DN 80 to 150.

• Made in France since 1950 in Vénissieux, then in Meyzieu.

• Series according to European standards, outlets with French Standards:

- NF EN 14384.

- NF EN 1074 - 6.

- NF EN 14384/CN.

- Conformity certificate CE 0679 - CPR - 0213.

- NF label holder.

- Certified in conformity with UE N°305/2011 regulation.

- NF E 29 - 572, symmetrical outlets.

- NF EN 12266 - 1, sealing rate A, torque level 1.

- EN 1092 - 2, flanges drilling ISO PN 10/16.

- Drinking Water Certified.

- Paint RAL 3000.

Pillar Fire Hydrant SAPHIR SILVER - Description

Airclap

Anti-water hammer and anti-vibration main valve guide

Internal/external epoxy coating

360°Rotation

DN 80 to DN 150

Traffic type and Non traffic type

Spare parts guarantee 5 years 5 years 10 years

Stationary drain

Removable drain

Upper Part: red polyester paint

Stainless steel components

Bronze seat


3Pillar Fire Hydrant SAPHIR SILVER - Description

1 - 3. Design: - Outlets with symmetric coupling (French Norm). - The DN 65 outlet has an Airclap cap (Fig. 1) letting the air in for

drainage. It also allows to check that the hydrant is not under pressure before opening the cap. A simple tap of your finger is enough to make it work and ensure the safety of users.

- Warning stickers are affixed on all caps. - Thermoplastic cover on cap for Saphir with reflective strips for increased

visibility at night. - Clockwise closing

- The specific design of the main valve guide is anti-water hammer and anti-vibration providing a smooth opening/closing (Fig. 2 and Fig. 10 Item 4 p5)

- The thick valve gasket helps the sealing even in presence of foreign bodies(Fig. 2 and Fig. 11 Item. 4 p5).

- No digging required to clean the drain thanks to a clever removable drain.

- Drain protection with the anti-root system 01 (Fig. 4).

- Duckfoot with loose flanges 02 (Fig. 4).

Fig. 1

13 turns

Smooth closing, blue curve.1 2 3 4 5 6 7 8 9 10 11 12 13 turns

Standard equipment on all hydrants models

Flow value example according to the number of opening torques of a DN100hydrant. Sudden stop with standard

valve (water hammer). Progressive stop with our anti

water-hammer valve

Air inlet Airclap andwarning sticker

Fig. 2

Fig. 3

1

1 Unscrew | 2 Remove

2

Fig. 4

01

02



1 - 4. Performances:

• Low operating torque over time.

- Bubble tight shut-off.

- Non-freezing type.

- Kv above the norm (see table page 7).

• Anticorrosion protection:

- Upper barrel with internal and external epoxy coating, by cataphoresis +

red polyester paint with UV protection (RAL 3000).

• Easy to install:

- 360° Rotating upper part, degree by degree without diggingt (Fig. 5).

- It is possible to fit a BAYARD sleeve, between the seat and duckfoot,

to raise the hydrant during installation, (heights 0.05 - 0.15 and 0.25 cm)

(Fig. 6).

- A polystyrene packing, fully recyclable, pprotects the hydrant from any

projection during installation (Fig. 7). (DN 150 in wooden crate).

• Quick and easy commissioning:

- Suitable with universal Drainkit to ease drainage on DN 80 and 100, DN 150

(Fig. 8).

- Option: our drain is threaded and possibly funneled with a simple

connection, according to the site’s constraint (Fig. 9).

- Operating square 30x30.

Fig. 5

Fig. 8

Fig. 9

Fig. 7

Fig. 6



Fig. 10

• Advantages of our range to reduce maintenance costs (Fig. 10 and 11) :

- Complete spare parts available. Interchangeability since 1971 with

past versions (for DN 80-100).

- Quick and easy dismantling of the upper operating set, through

the upper part.

- Quick and safe dismantling of the lower operating set.

- Removable drain whithout digging.

- Extension sleeve kit of 0.20 m after installation, without digging on

DN 80 (2016) and 100 (>2003).

- Conversion of a non traffic hydrant into a traffic version

(traffic) without digging with the mini kit CHOC (Fig.11 Item 6).

• Our fire hydrant is eco-friendly:

- 99% of its components are recyclable.

- Our PSE (polystyrene) packing is made of 2% of recycled material

and 98% of air.

It needs very little energy to manufacture, is 100% recyclable for life by

grinding, compaction and extrusion of PES granules.

LIVRET PIÈCES DE RECHANGE

POTEAUX D’INCENDIE APRÈS 2016

W16001A

LIVRET PIÈCES DE RECHANGE

POTEAUX D’INCENDIE AVANT 2016BOUCHES D’INCENDIE

W15019B

Fig. 11

06

07

05

04



Cast iron, Bronze or aluminum badges

Stickers

• Options:

Stickers, special colors, special outlets, several heights ….

HYDRANTS CUSTOMIZATION SPECIAL HYDRANTS

Our automatic solution for leak detection, with daily acoustic correlation integrated in our fire hydrants.

The solution for precise leak location: - Sharp filtering of unwanted noises, - Dedicated software to analyze data in a few minutes, - An expert system to optimize the number of modules to be deployed

and their location.

To fight against ”street pooling” or wild opening of hydrants restricting their use to firefighting and authorized persons

KIT SECURE

100% web-based asset management solution.Provides tools to organize maintenance and create work orders on all firefighting equipment. The created data base allows to share follow-up onhydrants through NFC tags, with real-time data updating, with authorities,town halls, companies …

TAGUATM

This real-time alert system allows: - evaluation of drawn volumes, - monitoring water drawings, - fighting against suspicious water drawing

COPERNICTM

Reduced height



b b

a

a±5° b±5°

DN 80 DN 100 DN 150 DN 80 DN 100 DN 150

1 outlet 3 outlets - 3 outlets 1 outlet 3 outlets - 3 outlets

Saphir 70° 70° 70° - 0° 65° 65° -

Saphir Traffic - - 70° 70° - - 65° 65°

1 - 6. Sizes, weight, and performances:

Prepared ground level

B

E

DN

30x30xOperating square

* Kv is the maximum flow, in m3/h, measured separately per outlet, according to norm EN14384.Torque Level 1.Total number of turns for opening: 13 ± 1 turns for DN 80 and 100 and 17 ± 1 turns for DN 150.Number of dead turns: maximum 2.

DN TRAFFICNON TRAFFIC

Bmm

Length

Amm

Cmm

Dmm

Emm

Flow expressed

in m3/h

Nboutlets

Kv* outlet WeightkgDN 40 DN 65 DN 100

n° 2 - 80 (60/65) NON TRAFFIC 1000 760 430 535 120 30 1 x 65 - 134 - 64

n° 2 - 80 (60/65) NON TRAFFIC 1200 760 430 535 120 30 1 x 65 - 134 - 66

n° 2 - 80 NON TRAFFIC 1000 760 430 535 135 30 1 x 65 - 137 - 65

n° 2 - 80 TRAFFIC 1000 760 430 535 135 30 1 x 65 - 136 - 65

n° 2 - 80 NON TRAFFIC 1200 760 430 535 135 30 1 x 65 - 137 - 66

n° 2 - 80 TRAFFIC 1200 760 430 535 135 30 1 x 65 - 136 - 66

n° 3 - 80 NON TRAFFIC 1000 760 430 535 135 30 1 x 65 + 2 x 40 45 137 - 77

n° 3 - 80 TRAFFIC 1000 760 430 535 135 30 1 x 65 + 2 x 40 45 136 - 77

n° 3 - 80 NON TRAFFIC 1200 760 430 535 135 30 1 x 65 + 2 x 40 45 137 - 83

n° 3 - 80 TRAFFIC 1200 760 430 535 135 30 1 x 65 + 2 x 40 45 136 - 83

n° 4 - 100 NON TRAFFIC 1000 760 430 535 180 60 1 x 100 + 2 x 65 - 126 236 93

n° 4 - 100 TRAFFIC 1000 760 430 535 180 60 1 x 100 + 2 x 65 - 132 226 93

n° 4 - 100 NON TRAFFIC 1200 760 430 535 180 60 1 x 100 + 2 x 65 - 126 236 104

n° 4 - 100 TRAFFIC 1200 760 430 535 180 60 1 x 100 + 2 x 65 - 132 226 104

n° 5 - 150 TRAFFIC 1000 750 540 400 220 120 2 x 100 + 1 x 65 - 143 261 170

n° 5 - 150 TRAFFIC 1200 750 540 400 220 120 2 x 100 + 1 x 65 - 143 261 170

A

D

C

DN 150

A

D

C

DN 80 to 100


8Pillar Fire Hydrant SAPHIR SILVER - DescriptionDN 80 to DN 100 - Non traffic type

1 - 7. Working conditions:• Maximum Working Pressure

(PFA) 16 bar• Normalized flow = 30 m3/h

for DN 80 - 60 m3/h for DN 100.• Working tamperatures = + 1°C

to + 65°C.• Drinking water or 2 mm screened

water.• Nonfreezing height = 1,00 m, others

possible height, (please consult us).

18

01

02

19

10

11

17

23

32

21

13

12

28

06

15

Item Designation Qty Materials Standards

01 1/2 tightening flange 2 Ductile iron GS NF EN156302 1/2 Support plate 2 Thermoplastic03 Sym. Cap DN65 or DN100 1 Aluminum-silicon NF EN170604 Sym. Cap. DN40 or DN65 with «AIRCLAP» 1 Aluminum-silicon NF EN170605 Sym. Cap DN40 or DN65 without «AIRCLAP» 1 Aluminum-silicon NF EN170606 Bolting 10 Steel + GEOMET07 Bonnet + screw M8x20 1 Thermoplastic08 DN100 or DN65 Sym. Nozzle cap 1 Thermoplastic09 DN65 Sym. Nozzle cap (for DN100) 2 Thermoplastic10 Operating square 30x30 + screw + washer 1 Cast iron GL NF EN156111 Chapeau DN100 + guide 1 Ductile iron GS NF EN156312 DN100 main valve + screw and gasket 1 Elastomer NF EN681-113 Lower barrel 1 Ductile iron GS NF EN156314 Drain body 1 Brass NF EN1216415 DN100 Duck-foot with loose flange 1 Ductile iron GS NF EN156316 O-ring 1 Brass NF EN1216417 Operating nut 1 Brass18 Foot cover 2 Cast iron GL NF EN156119 Valve guide 1 Cast iron GL NF EN156120 O-ring Ø106x6 1 Elastomer/EPDM NF EN681-121 O-ring Ø123x7 1 Elastomer/EPDM NF EN681-122 O-ring Ø8.9xØ2.7 1 Elastomer/EPDM NF EN681-123 Saphir head 1 Ductile iron GS NF EN156324 Support plate 1 Cast iron GL NF EN156125 Central symmetrical outlet (NF E 29-572) DN65 or DN100 1 Alu-silicium NF EN170626 Lateral symmetrical outlet (NF E 29-572) DN40 or DN65 2 Alu-silicium NF EN170627 Packing box 28 with gaskets 1 Brass NF EN1216428 Seat DN100 with gaskets 1 Ductile iron GS NF EN156330 Upper operating stem 1 Stainless steel 304 NF EN 1008831 Anti-root tube 1 A.B.S.32 Lower operating stem (non traffic type) 1 Galvanized steel34 Locking screw 1 Brass NF EN12164

16

20

27

30

07

25

03

08

04

26

09 05

DN 100

22

34

14

31

DNadmission

Centraloutlet

Lateraloutlets

65 65 without

80 - 1 outlet 65 without

80 - 3 outlets 65 2x40

100 100 2x65

24


9Pillar Fire Hydrant SAPHIR SILVER - DescriptionDN 80 to DN 100 - Traffic type

1 - 8. Working conditions:• Maximum Working Pressure

(PFA) 16 bar• Normalized flow = 30 m3/h

for DN 80 - 60 m3/h for DN 100.• Working temperatures = + 1°C

to + 65°C.• Drinking water or 2 mm screened

water.• Nonfreezing height = 1,00 m, others

possible height, (please consult us).

10

11

32

24

22

31

17

34

13

25

15

06

Item Designation Nb Materials Standards

01 1/2 tightening flange 2 Ductile iron GS NF EN156302 1/2 Support plate 2 Thermoplastic03 Sym. Cap DN65 or DN100 1 Aluminum-silicon NF EN170604 Sym. Cap. DN40 or DN65 with «AIRCLAP» 1 Aluminum-silicon NF EN170605 Sym. Cap DN40 or DN65 without «AIRCLAP» 1 Aluminum-silicon NF EN170606 Bolting 10 Steel + GEOMET07 Bonnet + screw M8x20 1 Thermoplastic08 DN100 or DN65 Sym. Nozzle cap (for DN100) 1 Thermoplastic09 DN65 Sym. Nozzle cap (DN100) and DN40 (DN80) 2 Thermoplastic10 Operating square 30x30 + screw + washer 2 Cast iron GL NF EN156111 Bonnet DN100 + guide 1 Ductile iron GS NF EN156312 DN100 main valve + screw and gasket 1 Elastomer NF EN681-113 Lower barrel 1 Ductile iron GS NF EN156314 Drain body 1 Brass NF EN1216415 DN100 Duck-foot with loose flange 1 Ductile iron GS NF EN156316 O-ring 4 Brass NF EN1216517 Operating nut 1 Brass18 Spacer stem holder 1 Stainless steel NF EN156319 Foot cover 2 Cast iron GL NF EN156120 Valve guide 1 Cast iron GL NF EN156121 O-ring Ø106x6 1 Elastomer/EPDM NF EN681-122 O-ring Ø123x7 1 Elastomer/EPDM NF EN681-123 O-ring Ø8.9xØ2.7 1 Elastomer/EPDM NF EN681-124 Saphir head 1 Ductile iron GS NF EN156325 Support plate 1 Cast iron GL NF EN156126 Central symmetrical outlet (NF E 29-572) DN65 or DN100 1 Aluminum-silicon NF EN170627 Lateral symmetrical outlet (NF E 29-572) DN40 or DN65 2 Aluminum-silicon NF EN170628 Packing box 28 with gaskets 1 Brass NF EN1216429 Seat DN100 with gaskets 1 Ductile iron GS NF EN156331 Operating stem 1 Stainless steel 304 NF EN 1008832 CHOC type operating stem 1 Stainless steel 304 NF EN 1008833 Anti-root tube 1 A.B.S.34 Upper operating set 1 Stainless steel 304 NF EN1002536 Lower operating set 1 Galvanized steel37 Locking screw 1 Brass NF EN12164

07

20

19

02

18

36

12

29

16

28

26

21

03

08

01

09

04

27

05

23

37

14

33

DN 100

DNadmission

Centraloutlet

Lateraloutlets

80 - 1 outlet 65 without

80 - 3 outlets 65 2x40

100 100 2x65


10Pillar Fire Hydrant SAPHIR SILVER - DescriptionDN 150 - Traffic type

05

14

31

34

23

01

30

33

17

11

10

21

28

20

24

16

08

02

26

04

15

1 -9. Working conditions SAPHIR DN 150 - Traffic:

• Maximum Working Pressure (PFA) 16 bar

• Normalized flow = 120 m3/h.• Minimum inlet pressure for this

flow = 1 bar• Working tamperatures = + 1°C to + 65°C.• Drinking water or 2 mm screened water.• Range: - DN 150 admission 150 - Traffic type -

1 symmetrical DN 65 and 2 symmetrical DN 100 outlet.

• Nonfreezing height = 1,00 m, others possible height, (please consult us).

Item Designation Qty Materials Standards

01 1/2 tightening flange 2 Ductile iron NF EN156302 1/2 Support plate 2 Thermoplastic03 Sym. cap DN100 2 Aluminum-silicon NF EN170604 Sym. cap DN65 with ”AIRCLAP” 1 Aluminum-silicon NF EN170605 Bonnet + screw 1 Thermoplastic06 Nozzle cap DN 100 2 Thermoplastic07 Nozzle cap DN 65 1 Thermoplastic08 Operating square 30x30 + screw + washer 2 Cast iron NF EN156109 Bonnet DN 150 + guide 1 Ductile iron NF EN156310 DN 150 Main valve 1 Elastomer NF EN681-111 Lower barrel 1 Ductile iron NF EN156312 Drain body 1 Brass NF EN1216413 Duckfoot DN150 with loose flange 1 Ductile iron NF EN156314 O-ring 2 Brass NF EN1216415 Operating nut 1 Cast iron NF EN1216416 Spacer stem holder 1 Stainless steel NF EN156317 Foot cover 2 Cast iron NF EN156118 Valve guide 1 Cast iron NF EN156119 O-ring Ø158x7 1 Elastomer /EPDM NF EN681-120 O-ring Ø171x7 2 Elastomer /EPDM NF EN681-121 O-ring Ø171x7xØ6.99 1 Elastomer /EPDM NF EN681-122 O-ring Ø8.9xØ2.77 1 Elastomer /EPDM NF EN681-123 Saphir 5 nose 1 Ductile iron NF EN156324 Support plate 1 Cast iron NF EN156125 Symmetrical outlet DN100 (NF E 29-572) 2 Aluminum-silicon NF EN170626 Symmetrical outlet DN65 (NF E 29-572) 1 Aluminum-silicon NF EN170627 Packing box 28 with gaskets 1 Brass NF EN1216428 Seat DN150 with gaskets 1 Ductile iron NF EN156330 Operating stem 1 Stainless steel 304 NF EN 1008831 CHOC operating stem 1 Stainless steel 304 NF EN 1008832 Anti-root tube 1 A.B.S.33 Lower operating set 1 Galvanized steel34 Upper operating set 1 Stainless steel 304 NF EN1008835 Drain protecting tube 1 ABS37 Locking screw 1 Brass NF EN12164

Bolting Steel + GEOMET

18

13

25

07

03

06

27 09

19

22

37

12

32


11Hydrants SAPHIR SILVERSetting up and implementation of a project

Security and environment:• Installation, maintenance and repair operations must comply

with the local regulations in force, relating to safety at work and respect for the environment.

• Insist that workers wear the appropriate personal protective equipment. Make sure that the lifting accessories and power tools used comply with the regulations in force. Enforce their terms of use.

• Installation, maintenance and repair work will be carried out by qualified, trained and authorized personnel in accordance with current legislation.

• From an environmental point of view, the device is recyclable. Advise to deposit the packaging in a recovery container.

* Adjustable surface box with fire cover Series G4 15

Universal DrainkitSeries A3 40

* Dry stones for correct drainage

* Major Stop for DI or PVC Series C1 30 / 35

with pipe.

Major Stop for DI or PVC

Series C1 30 / 35

Flanged TeesSeries C4 20

* Operating stemSeries B5 20

* Gate valve SeriesB1 15

Extension sleeve between seat and

duckfoot for Series A3 40L = 0,05 mL = 0,15 mL = 0,25 m

A

L

Femal elbow with swivel nut G 1/2“ x PE DN 20

Series G7 50.

or

Implementation:• The specifications for the supply, installation and reception of

fire hydrants must refer to standard NF S 62-200.

• Installation, commissioning and maintenance are described in the manual W18022 supplied with the hydrant.

• Our fire hydrants are protected in their polystyrene packing for DN 80 and 100 and in wooden crates fort DN 150, which preserve paint during installation.

Storage and handling:• Store the device lying down, elbow facing down, for a maximum

of one year, at a temperature not exceeding 65 ° C and protected from shocks.

• Handle it with care in its packaging. Lifting for installation is possible by means of a strap passed through the packaging or under the outlets.

Control and maintenance:• The control and maintenance of fire hydrants is described in

standard NF S 62-200.

* Concrete squareSeries A3 40

* Concrete block

* S-bend Series A3 10

Size L = +/- 0.50 mSize A :

DN 65 = 0,24 mDN 80 = 0,28 m

DN 100 = 0,28 mDN 150 = 0,32 m

2 - 4. Definition of equipment for installation according to: NORM NF S 62-200*

Our threaded drain funneled with a simple

connection for PE DN 20 pipe laid on a 3cm/m slope

Your Choice in Waterflow Control

TALIS is the undisputed Number One for water transport and water

flow control. TALIS has the best solutions available in the fields of

water and energy management as well as for industrial and communal

applications. We have numerous products for comprehensive

solutions for the whole water cycle - from hydrants, butterfly valves

and knife gate valves through to needle valves. Our experience,

innovative technology, global expertise and individual consultation

processes form the basis for developing long-term solutions for the

efficient treatment of the vitally important resource “water”.

BAYARD

ZI - 4 avenue Lionel Terray

CS 70047

69881 Meyzieu cedex France

TEL. + 33 (0)4 37 44 24 24

FAX + 33 (0)4 37 44 24 25

WEBSITE : www.bayard.fr

Specifications and performance may be changed without notice as a result of technical developments. Images and photos given for illustration purposes only.

pillar fire hydrant saphir silver series a1 62

Documents