piercing punch - utp mould & die · 2020. 7. 14. · - 1 - piercing punch precision piercing...

- 1 -

Piercing Punch Precision piercing punches according to DIN 9861 DA

D1 Length L

70 80 100

1.5

1.6

2

2.4

2.5

2.9

3

3.2

3.5

3.7

3.8

3.9

4

4.2

4.8

5

5.2

5.5

6

6.2

6.5

7

7.2

8

8.5

9

10

10.5

11

12

Steel : Cold Working

Hardness : Shank - HRC 62 ± 2

Head - HRC 45 ± 5

Order Example : D1 x L

Ex Stock Other Sizes Available on Request

- 2 -

K 1300.2 - Punch with conical head DA-HWS DIN 9861/1

Available on Request

- 3 -

K 1300.2 - Punch with conical head DA-HWS DIN 9861/1


- 4 -

K 1301.2 - Punch with conical head - stepped CA-HWS DIN 9861/2


- 5 -

K 1310.3 - Punch with conical head D-HSS ISO 6752 DIN 9861/1


- 6 -

K 1310.3 - Punch with conical head D-HSS ISO 6752 DIN 9861/1


- 7 -

K 1310.4 - Punch with conical head D-ASP ISO 6752 DIN 9861/1


- 8 -

K 1311.3/4 - Punch with conical head C-HSS or C-ASP ISO 9181 DIN 9861/2


- 9 -

K 1315 - Punch with tapered head D-HSS

K 1316 - Punch with Tapered head - stepped C-HSS



- 10 -

K 1320.2/3 - Punch with cylindrical head A-HWS or A-HSS ISO 8020


- 11 -

K 1321.2/3 - Punch with cylindrical head - stepped/shaped B-HWS or B-HSS ISO 8020


- 12 -

K 1322.2/3 - Punch with cylindrical head - reduced shank AX-HWS or AX-HSS ISO 8020


- 13 -

K 1323 - Pilot with parabolic tip ISO 8020

K 1324 - Punch with Tapered tip ISO 8020



- 14 -

K 1330.3 - Punch with cylindrical head - with ejector pin E-HSS ISO 8020


- 15 -

K 1331.3 - Punch with cylindrical head with ejector pin - stepped/shaped F-HSS ISO 8020


- 16 -

K 1340 - Matrixes without shoulder - round/shaped ISO 8977


- 17 -

K 1341 - Matrixes with shoulder - round/shaped ISO 8977


- 18 -

K 1342 - Matrixes without shoulder with start bore ISO 8977

K 1343- Matrixes with shoulder with start bore ISO 8977



- 19 -

K 1345 - Matrixes without shoulder automotive standard - round/shaped AUTOMOTIVE STANDARD


- 20 -

K 1346 - Matrixes with shoulder automotive standard - round/shaped AUTOMOTIVE STANDARD


- 21 -

K 1347 - Punch without shoulder automotive standard with start bore AUTOMOTIVE STANDARD

K 1348 - Punch with shoulder automotive standard with start bore AUTOMOTIVE STANDARD



- 22 -

K1350 - Ball-lock punch - light duty AUTOMOTIVE STANDARD


- 23 -

K 1351 - Ball-lock punch - stepped/shaped - light duty


- 24 -

K 1352 - Ball-lock pilot with parabolical tip - light duty

K 1353 - Ball-lock pilots with parabolical tip - light duty



- 25 -

K 1355 - Ball-lock punch with ejector pin - light duty


- 26 -

K 1356 - Ball-lock punch with ejector pin - stepped/shaped - light duty


- 27 -

K 1360 - Ball-lock punch - heavy duty


- 28 -

K 1361 - Ball-lock punch - stepped/shaped - heavy duty


- 29 -

K 1362 - Ball-lock pilots with parabolical tip - heavy duty

K 1363 - Ball-lock pilots with tapered tip - heavy duty



- 30 -

K 1365 - Ball-lock punch with ejector pin - heavy duty


- 31 -

K 1366 - Ball-lock punch with ejector pin - stepped/shaped - heavy duty


- 32 -

K 1370 - Ball-lock matrix - round/shaped


- 33 -

K 1371 - Ball-lock matrixes with start bore


- 34 -

K 1380/1/2 - Retainers for Ball-lock punch - light duty/heavy duty


- 35 -

Piercing Punch Technical Information

- 36 -


- 37 -


- 38 -

Information - Cutting Gaps

Cutting gap (mm) at a shearing strength KS of Sheet thickness, normal size

(mm)

Admissible Thickness deviations

(mm)

piercing punch - utp mould & die · 2020. 7. 14. · - 1 - piercing punch precision piercing...

Documents