phase | vislinkincam-s sony camera transmitter built into the sony hdc-2400, 2500, 2550 series hd...
TRANSCRIPT
PHASE | VISLINK:
Wireless Camera Systems
L1700 Camera Transmitter…………………….p. 2-3
INCAM G Grass Valley Camera Transmitter....p. 4-5
INCAM S Sony Camera Transmitter................p. 6-7
CLIP ON 4 Camera Transmitter.......................p. 8-9
Camera Control System……………………p. 10-11
OCP 5 Camera Control System…………….p. 12-13
FOCAL POINT Camera Control System…..p. 14-15
UltraLite 4K UHD Wireless Cam Encoder...p. 16-17
UltraDecoder HEVC Decoder……………..p. 18-19
Barrel Booster……………………………….p. 20-21
L3025 DownConverter……………………….p. 22-23
L1700Camera Transmitter
The L1700 range of wireless transmitters represent the next generation of flexible wireless systems from Link. Now even more powerful this new range is the most compact and versatile available. With multiple inputs and mounting options this unit can be mounted to full broadcast camera for sports broadcasters or ENG camera for news or even a prosumer camera to broaden the market reach further. With user interchangeable RF modules and a range of software options the Link L1700 continues the line of innovative, high performance RF transmitters.
Key Features
■ H.264 Very Low Latency Encoder ■ HD-SDI / 3G HD-SDI / HDMI / Composite input
■ Wi-Fi Control ■ Docks with L1750 range of TX modules ■ Integrated Camera Control (requires L1750 for UHF reception)
Typical Applications
■ Event Coverage ■ Newsgathering ■ Sports Coverage
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to
change specifications without notice. Please contact your representative to confirm current specifications.
www.vislink.com • [email protected]
07/15 ENGRD000529 Rev 2
TRANSMITTER ■ L1750-1927 1.95GHz to 2.7GHz frequency range
■ L1750-3239 3.2GHz to 3.9GHz ■ L1750-6471 6.425GHz to 7.125GHz
■ L1750-6875 6.8GHz to 7.5GHz ■ DVB-T at bandwidths of 6 / 7 / 8 MHz
■ LMS-T proprietary modulation for enhanced mobile operation
■ LMS-T bandwidths of 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20 or 24MHz with 2 carrier density options
■ Optional Link Digital Pre-Distortion for enhanced adjacent channel performance
UHF RECEIVER ■ 410MHz to 490MHz frequency range
ENCODER ■ 20ms to 1340ms latency depending on operational mode
■ H.264 4:2:2 8-Bit to 1080i 60 high 4:2:2 level 4.1 (L1730) L1730 No longer available, replaced by L1731
■ H.264 4:2:0 8-Bit to 1080p 60 (L1731)
■ 1920, 1440 & 960 horizontal resolutions at 1080i
■ 1280, 960 & 640 horizontal resolutions at 720p
■ 2 stereo audio pairs MP1L1 and MP1L2
ASI (LEMO) ■ Input (for service multiplexing) ■ Output ■ Input and Output on multifunction pins
NETWORK (RJ45) ■ 100Mbit/s Ethernet ■ Output Transport Stream over UDP or RTP
■ Integrated webserver for control
NETWORK (WI-FI) ■ 2.4GHz ■ Mobile phone / tablet friendly web pages
CAMERA CONTROL (LEMO) ■ Support for various professional broadcast cameras
■ Used in conjunction with an L1750 module
■ Dual channel wet tally 12V output
USER INTERFACE ■ OLED display for enhanced visibility
DOCKING MODULE INTERFACE ■ Docks with L1750 transmitter / UHF receiver
POWER ■ Power supply via Lemo e.g. to connect to D-Tap power source
■ Extended operation voltage range 10V to 32.2V
POWER CONSUMPTION ■ Nominally 15W in standard configuration (with L1750-1927)
FRAME RATES (FPS)
L1730 No longer available ■ 1080i 25/29.97/30 ■ 720p 50/59.94/60 ■ 1080p 23.98/24
L1731 ■ 1080i 25/29.97/30 ■ 720p 50/59.94/60 ■ 1080p 50/59.94/60
VIDEO INPUTS ■ SDI / HD-SDI (L1730) / 3G SDI (L1731) (BNC)
■ HDMI (Type-D) ■ Composite (Lemo)
AUDIO INPUTS ■ Embedded audio over SDI / HD-SDI (L1730) / 3G SDI (L1731)
■ 1 analogue audio stereo pair (Lemo)
■ Mic / Line level support with phantom power
■ Headset audio input
DATA INPUTS ■ RS232 input relayed to receiver e.g. for external GPS unit
HEADSET (3.5MM JACK) ■ Headset microphone audio selectable as audio source
■ Primary audio channel monitoring ‡
PHYSICAL
Dimension ■ 135 (L) x 40 (H) x 83 (W) mm (inc. Removable heatsink mounts, exc. RF
■ connectors)
Weight ■ 550g (including removable heatsink, excluding antennas) ‡
ENVIROMENTAL ■ Operating Temperature: –10º C to +50 C ‡
NOTES ■ ‡ Availability subject to confirmation. ■ Some features specified are available via optional licenses ■ Not all encoder interface options are concurrently available ■ We reserve the right to change specifications at any time without prior notice
SPECIFICATIONS
INCAM-GGrass Valley Camera Transmitter
Built into the Grass Valley LDX series HD camera, the Vislink INCAM-G Integral Wireless Camera Transmitter provides full HD broadcast quality encoding at 1080p, 1080i, and 720p plus built in wireless camera control.
Key Features
■ Built in Wireless Camera Control ■ Ultra Low Delay down to 20ms H.264 ■ Data rates up to 39Mbit/s ■ Add on PA Barrel Booster option ■ Video and tally outputs for Steadycam ■ Full configuration available by Windows™ PC software
Typical Applications
■ Event Coverage ■ Newsgathering ■ Sports Coverage
SPECIFICATIONS
08/14 - Rev 1RD001673
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.
www.vislink.com n [email protected]
Frequency Bands ■ 1.95 to 2.7GHz,
■ 3.3 to 3.7GHz(consult factory for other bands)
Tuning Range ■ 400MHz standard bandwidth or 1.95 to 2.7GHz factory option
Frequency Selection ■ Up to 16 pre-set channels or tuning in 1MHz steps (500kHz steps available to special order)
Transmit Power ■ Adjustable 10 to 250mW (or add Barrel Booster option).
* subject to frequency band
Transmit Antenna ■ Omni Directional 4dBi gain (nominal)
Modulation ■ COFDM DVB-T 2K or switchable LMS-T (factory option) or switchable ISDB-T (factory option), 2K, 4K, 8K with Time Interleaving selectable 100ms, 220ms, 440ms
Modulation Modes ■ QPSK, 16QAM, 64QAM
■ FEC: 1/2, 2/3, 3/4, 5/6, 7/8
■ Guard interval: 1/32, 1/16, 1/8, 1/4
Bandwidth ■ DVB-T / ISDB-T 6, 7, 8MHz switchable
■ LMS-T scalable 3 to 20MHz (factory option)
Data Rate ■ DVB-T / ISDB-T 4.98 to 31.7Mbit/s
■ LMS-T up to 39Mbit/s, bandwidth dependant (factory option)
Encoding ■ H.264/MPEG-4, level 4.1 video.
■ Profile 4.2.0 / 4.2.2 selectable
■ Audio MPEG-1 layer 2 / layer 1 selectable
Latency ■ Selectable down to less than 1 frame, 20ms
GOP & PIDs ■ GOP Selectable 4 to 30
■ PIDs user configurable
Video Input ■ HD SDI 1080i, 1080p, 720p as defined by the camera
Audio Inputs ■ Two audios, includes external audio input with phantom powering
■ Audio encoding rate selectable 128, 256, 384kBit/s
User Data input (camera control return data)
■ Selectable 1,200 to 230,400 baud
Monitoring and Control ■ Comprehensive transmitter setup via Windows™ PC software
Power Supply ■ 12 - 16V DC, 18 Watts, includes external DC input
Environmental ■ -20° to +50°C
■ Altitude: 4500m, Humidity: 95% long term
Camera Control data receiver ■ Operating bands - UHF and VHF
■ Tuning step size - 12.5kHz or 6.25kHz
■ Modulation - GMSK
■ Data rate - 300 to 19200 bps
■ Tally - included
INCAM-SSony Camera Transmitter
Built into the Sony HDC-2400, 2500, 2550 series HD camera, the Vislink INCAM-S Integral Wireless Camera Transmitter provides full HD broadcast quality encoding at 1080p, 1080i, and 720p plus built in wireless camera control.
Key Features
■ Built in Wireless Camera Control ■ Ultra Low Delay down to 20ms H.264 ■ Data rates up to 39Mbit/s ■ Add on PA Barrel Booster option ■ Full control via the camera viewfinder
Typical Applications
■ Event Coverage ■ Newsgathering ■ Sports Coverage
SPECIFICATIONS
08/14 - Rev 1RD001674
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.
www.vislink.com n [email protected]
Frequency Bands ■ 1.95 to 2.7GHz,
■ 3.3 to 3.7GHz
(consult factory for other bands)
Tuning Range ■ 400MHz standard bandwidth
■ 1.95 to 2.7GHz factory option
Frequency Selection ■ Up to 16 pre-set channels or tuning in 1MHz steps via side mounted panel control (500kHz steps available tospecial order)
Transmit Power ■ Adjustable 10 to 250mW (or add Barrel Booster option).
*subject to frequency band
Transmit Antenna ■ Gigawave Omni Directional 4dBi gain (nominal)
Modulation ■ COFDM DVB-T 2K or switchable LMS-T (factory option) or switchable ISDB-T (factory option), 2K, 4K, 8K with Time Interleaving selectable 100ms, 220ms, 440 ms
Modulation Modes ■ QPSK, 16QAM, 64QAM
■ FEC: 1/2, 2/3, 3/4, 5/6, 7/8
■ Guard interval: 1/32, 1/16, 1/8, 1/4
Bandwidth ■ DVB-T / ISDB-T 6, 7, 8MHz switchable
■ LMS-T scalable 3 to 20MHz (factory option)
Data Rate ■ DVB-T / ISDB-T 4.98 to 31.7Mbit/s
■ LMS-T up to 39Mbit/s, bandwidth dependant (factory option)
Encoding ■ H.264/MPEG-4, level 4.1 video.
■ Profile 4.2.0 / 4.2.2 selectable
■ Audio MPEG-1 layer 2 / layer 1 selectable
Latency ■ Selectable down to less than 1 frame, 20ms
GOP & PIDs ■ GOP Selectable 4 to 30
■ PIDs user configurable
Video Input ■ HD SDI 1080i, 1080p, 720p as defined by the camera
Audio Input ■ Audio encoding rate selectable 128, 256, 384kBit/s
User Data input(camera control return data)
■ Selectable 1,200 to 230,400 baud
Monitoring and Control ■ Comprehensive transmitter setup via camera viewfinder.
Power Supply ■ 12 - 16V DC, 18 Watts
Weight ■ Additional camera weight, 470g
Environmental ■ -20° to +50°C
■ Altitude: 4500m, Humidity: 95% long term
Clip-On 4Camera Transmitter
Designed for use with both HD and SD cameras for electronic newsgathering, television outside broadcasts and studio applications, with latency down to one frame (33ms), and using the latest H.264 or MPEG-2 encoding, the Clip-On 4 offers exceptional picture quality and capability. No other wireless camera system can match the outstanding RF performance of the Clip-On 4. Full remote control of broadcast cameras is available when used in conjunction with the Gigawave Camera Control system.
Key Features
■ Interchangeable RF Modules ■ Built in Wireless Camera Control (option) ■ Ultra Low Delay down to 20ms H.264 ■ Future proof for 1080p software upgrade ■ Add on PA Barrel Booster option ■ Encryption BISS 1 and E, or AES256 (option)
Typical Applications
■ Event Coverage ■ Newsgathering ■ Sports Coverage
SPECIFICATIONS
09/14 - Rev 1RD001679
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.
www.vislink.com n [email protected]
Frequency Band ■ 1.3 - 7.5GHz (consult factory for other bands)
Tuning Range ■ 400MHz standard bandwidth
■ 1.95 to 2.7GHz factory option
Frequency Selection ■ Up to 16 pre-set channels or tuning in 1MHz steps via
■ side mounted panel control (500kHz steps available to special order)
Transmit Power ■ Adjustable 10 to 200mW, (or add Barrel Booster option).
Transmit Antenna ■ Gigawave Omni Directional 4dBi gain (nom.)
Modulation ■ COFDM DVB-T 2K
■ ISDB-T 2K with Time Interleaving selectable 100ms, 220ms, 440 ms (factory option)
■ LMS-T (factory option)
Modulation Modes ■ QPSK, 16QAM, 64QAM
■ FEC: 1/2, 2/3, 3/4, 5/6, 7/8 (modulation dependant)
■ Guard interval: 1/32, 1/16, 1/8, 1/4
Bandwidth ■ DVB-T 6, 7, 8MHz switchable
■ LMS-T scalable 3 to 24MHz (factory option)
Data Rate ■ DVB-T 4.98 to 31.7Mbit/s
■ LMS-T up to 43Mbit/s, bandwidth dependant (factory option)
Encoding ■ H.264/MPEG-4, level 4.1 video, or MPEG-2
■ Profile 4.2.0 / 4.2.2 selectable
■ Audio MPEG-1 layer 2 / layer 1 selectable
Latency ■ Selectable down to sub 1 frame, 20ms
GOP & PIDs ■ GOP Selectable 1 to 30
■ PIDs user configurable
Video Input ■ SDI HD SMPTE-292M (299M) 1080i / 720p, (1080p future)
■ SDI SD SMPTE-259M (272M) 576i / 480i
■ Analogue: CVBS (PAL/NTSC) or component YUV, Y/C
HDMI ■ Test signal: Colour bars
Audio Input ■ 4 channels, Analogue mic/line switchable
■ SDI embedded, AES digital, HDMI
■ Audio encoding rate selectable 128, 256, 384kBit/s
■ Test signal: Audio tones
ASI input ■ ASI input, selectable through front panel menu
■ Built in ASI MUX
■ ASI output
User Data input (camera control return data)
■ Selectable 1200 to 230,400 baud
Encryption ■ BISS modes 1 and E, or AES256 (factory options)
Remote control ■ Ethernet port, web browser interface.
Power Supply ■ 10 - 35V DC
Size & Weight ■ 178 x 106 x 91mm (including connector), 0.95kg
Environmental ■ -20° to +50°C
■ Altitude: 4500m, Humidity: 95% long term
PU
BL
IC
SA
FE
YVIS
LINK N
ews and Entertainm
ent
OverviewThe VISLINK Wireless Camera System based on the L1500, with the L1255 Wireless Camera Control Unit (CCU) and the L1520 Camera Control module is the most versatile wireless camera system on the market.
Full camera control using manufacturers Operator Control Panels (OCP) is the only way to ensure the pictures from wireless cameras match those of their wired counterparts. The Link Camera Control System provides vision engineers with the facility to use the same control panels for wired and wireless cameras. The system makes every feature available on the panel to achieve the desired pictures and meet the most demanding broadcast requirements.
The L1255 Wireless CCU interfaces the control panel and is a transmitter for sending the control data to the L1520 module within the L1500 Camera Back. This communication operates using UHF and a robust modulation scheme. Closed loop control is achieved with return data being sent on the video transport stream back to the CCU.
The L1255 Wireless CCU Interface is a half width rack unit which can be mounted next to the Lynx L1274 or the Link L2134, only occupying 1RU. The L1520 slots into the L1500, occupying no additional space and can be easily be fitted in the field.
Link have been providing fully featured camera control using manufacturers panels since 2007 and have worked closely with end users and camera manufacturers to develop it into the product it is today.
Camera Control System
Wireless Camera Control System
FeaturesFully functional manufacturers • control for broad range of Sony, Thomson, Ikegami, Panasonic and Hitachi cameras and panels.
410-490MHz frequency range • with 250Hz selection resolution.
L1520 camera control receive • module integrated into L1500 camera back transmitter. No need for additional protocol conversion boxes or cabling.
Full functionality of the • Manufacturers control panel including real-time feedback of parameters from the camera to the OCP.
Data cables supplied for specific • camera types.
Red and green tally for • supporting cameras.
Tally outputs on camera back for • additional tally lights
Supports Link Generic camera • control system.
Support for remote location of • UHF transmitter
www.vislink.com
© 2011 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 2 / 2 / 2011
SpecificationsL1520 Camera Control Receiver
RF CharacteristicsFrequency range
410-490MHz•
Output Power0.1-2W•
Occupied Bandwidth20KHz•
Step size250Hz•
ModulationGMSK•
Data Rate9.6K Baud•
Inputs & OutputsUHF Output
BNC Jack, 50Ω•
Control panel connection9way D-type (data and power)•
Tally 1 & 2XLR 3 pin Female•
RemoteSerial RS-232 Control, 6 pin Lemo, •
Auxiliary(For 2nd L1255 to act as a remote transmitter)
5 pin Lemo•
Rx Input6 pin Lemo•
Physical Chassis
1RU height, half rack width,•
Dimensions210mm [8.3”] x 350mm [13.8”]•
Weight:2.5kg (5.5lb)•
Power 100 – 240Vac; 20W •
(max at 2W Tx power)
EnvironmentalTemperature (Operating)
0° to +50°C [32° to122°F ]•
Humidity (Non-Condensing) 95% •
ComplianceETSI EN 300 113-1 V1.6.• FCC Parts 15 & 90 •
RF CharacteristicsL1520-4145 410-450MHz • L1520-4549 450-490MHz•
Frequency step size250Hz•
Sensitivity–117dBm•
[typical 50kHz channel spacing]
ModulationGMSK•
Data Rate9.6K Baud•
Adjacent channel rejection 50dB•
[typical 50KHz offset]
Inputs & OutputsUHF Input
SMA Jack, 50Ω•
Camera Control Data5pin Lemo,•
Tally6 pin Lemo, •
Physical (Fits within L1500)
Weight:0.2kg (0.45lb)•
Power 6W•
Supplied by L1500
Environmental Temperature (operating)
0° to +50°C [32° to122°F]•
Humidity (non-condensing)95% •
ComplianceEN 300 220-1 V2.1.1•
L1255 Wireless CCU Interface
Ikegami – SDHL45• HC400W• HL55• HL60• HL57• HL59• HL65W• HK355P• HK355• HK366P• HK366• HK377P• HK388P• HK388• HLV55• HL-DV5• HK399•
Ikegami – HDHDK79EXIII• HDK79EC• HDS-V10•
Sony – SDBVP30• BVP70• 550• 570• BVP90• E10/E30• 950• PDW-700• DXC-D30• DXC-D35• DXC-D50• DXC-D55• DNW-9WS• DSR-450• DVW-970P•
Sony – HDHDC-1400• HDC-1450R• HDC-1500• HDC-1500R• HDC-1550• HDW-650P• PDW-700• PDW-750• PDW-EX3• HXC-100• HSC-300• HDC-P1•
Thomson – SDLDK100• LDK200• LDK300• LDK500•
Thomson – HDLDK-3000• LDK-6000• LDK-7500• LDK-8000• LDK-8000Elite•
Panasonic – HDAJ-HPX900• AJ-HPX2700• AJ-HPX2100E• AJ-HPX3700G•
Hitachi – HDSK-HD1000•
Supported Cameras
Note: For other cameras please consult VISLINK.
Example Camera Control System Diagram
Output
L1500LINKTransmitter
L1520 Camera ControlReceiver
L3025Downconverters
LYNX DiversityReceiver
L1255 WirelessCCU Interface
OperatorControl
Panel(OCP)
Key Features
■ Compact ■ Intuitive menu driven LCD display
Typical Applications
■ Event Coverage ■ Newsgathering ■ Sports Coverage
OCP-5Camera Control SystemThe Wireless Camera Control System provides comprehensive control functions and includes three main units - the Operator’s Control Panel (OCP), UHF Data Transmitter and the Data Receiver mounted on the camera. As an option, an additional auxiliary interface unit allows up to 8 OCPs to be connected to a single Data Transmitter, allowing multiple cameras to be controlled using a single narrow-band frequency. Return Data may be provided by the User Data feature on Gigawave Clip-On transmitters and receivers.
SPECIFICATIONS
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to
change specifications without notice. Please contact your representative to confirm current specifications.12/14 ENGRD001709 Rev 1
www.vislink.com • [email protected]
COMPATIBLE CAMERA TYPES
Sony ■ DXC-D30 ■ DXC-D35 ■ DXC-D50 ■ DXC-D55 ■ BVP-550 ■ BVP-570 ■ BVP-950 ■ BVP-E10 ■ BVP-E30 ■ HDC-1500 ■ HDC-1550 ■ HDC-1400 ■ HDC-1450 ■ HSC-100 ■ HXC-300 ■ PDW-700 ■ PDW-F800 ■ PMW-EX3
Ikegami ■ HL-55 ■ HL-59 ■ HL355 ■ HK-388 ■ HK-399 ■ HC-400
Thomson ■ TTV1657D ■ LDK100 ■ LDK200 ■ LDK300 ■ LDK400 ■ LDK500 ■ LDK4000 ■ LDK6000 ■ LDK8000 ■ LDK8000 Elite
Hitachi ■ Z-3k ■ SK900 ■ SK1000-H
JVC ■ KY-D29
Panasonic ■ AJ-HPX2000
DATA TRANSMITTER
Frequency bands ■ UHF (VHF option)
Tuning range ■ 450 to 470MHz (optional wider bandwidth to special order)
Frequency selection ■ 6.25kHz step size
Occupied bandwidth ■ 12.5 / 20 / 25kHz (other bandwidths selectable)
Modulation ■ GMSK
Data rate ■ 4800 to 19200 Baud ■ TX output power ■ 2 or 5 Watt versions
Size and weight ■ 1U rack mount, 460mm deep, 2.75kg
Power ■ 110 to 260 VAC
DATA RECEIVER
RF specifications ■ Compatible with the transmitter
Camera selection and RF channel ■ Software control or Internal selector switches (model dependant)
Size and weight ■ Alternative receiver versions according the camera model
Power ■ +12VDC from camera battery
OEM OCP CONTROLThe Gigawave Camera Control System may also be used with OEM OCPs. Currently supported types are Sony RCP-750, RCP-1500 and Grass Valley OCP-400 (for other types of OEM OCP please contact Gigawave).
CAMERA CONTROLS (CAMERA MODEL DEPENDENT) ■ RGB – White balance ■ • RGB – Black balance ■ • RGB – Flare control ■ • RGB – Gamma control ■ • ND and CC filter control ■ • Master Black Pedestal ■ • Iris control
■ • Auto/manual iris control ■ • Configurable open/close iris ■ limits ■ • Detail ■ • Detail dependency ■ • Saturation ■ • Auto-Knee
■ • Bars ■ • Configurable Panel lockout ■ • Gain steps ■ • White balance presets and ■ fixed temperatures
Key Features
■ Allows control of up to six cameras by multiplexing six control panels over single RF link.
■ Supports one-way or return data communication to camera
■ Three CRIU units can be linked together to allow control of 18 cameras using one RF head
■ 2.2” Colour LCD display with intuitive menu for easy configuration
■ Front panel LED shows data activity / system health diagnostic information
■ Compact UHF telemetry transmitter unit with copper and fibre connectivity
■ Unit configurable via the front panel or by a web browser
Typical Applications
■ Event Coverage ■ Newsgathering ■ Sports Coverage
FocalPointWireless Camera Control SystemThe FocalPoint is Vislink's latest wireless camera control system providing comprehensive control functions for today’s broadcast needs. The system can control multiple camera and operator control panel combinations, with future-proof Ethernet control. Designed to work with the majority of camera manufacturers the control system can support one-way or return communication. The innovative, weatherproof outdoor unit provides operational flexibility with the freedom to move beyond the studio or truck. The unit also supports copper or fibre optic connectivity.
SPECIFICATIONS
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to
change specifications without notice. Please contact your representative to confirm current specifications.02/15 ENGRD00#### Rev 1
www.vislink.com • [email protected]
PRIME POWER PARAMETERS
Power Supply ■ 100V – 240V AC ■ 50/60 hZ
Power Output ■ Configurable in 0.1 W steps
TRANSMITTER PARAMETERS
Frequency Band ■ UHF (VHF OPTION)
Tuning Range ■ 440 MHz – 476 MHz (Other bands available on request)
Bandwidth ■ 12.5 kHz / 20.0 kHz / 25.0 kHz
Modulation ■ GMSK
MECHANICAL PARAMETERS
Dimensions ■ Rack
■ 483mm (W) x 303mm (H) x 44mm (D) (19” x 1U)
■ Headunit ■ 130mm (W) x 82mm (H) x 210mm (D)
Weight ■ Rack
■ 2.45kg
■ Headunit ■ 1.54kg
COMPATIBLE CAMERA TYPES
■ Sony ■ RCP1500/153
Other manufacturers to be added with firmware upgrade
■ Hitachi ■ RU1500
Video Parameters
Outputs
Environment & Physical
Audio Encoder
ISO 14496-3 2006 (HE-AAC) 8 pairs
Audio Inputs
Embedded
ASI
UltraLite 4K UHD wireless camera encoder module
The UltraLite utilises state of the art HEVC encoding to make 4K UHD wireless live video a reality today. Being the world’s first, the UltraLite is a lightweight ‘module’ that can be attached to any existing wireless camera system enabling live transmission of Ultra High Definition video.
Being so lightweight, the UltraLite is attachable to a variety of 4K UHD camera such as the Sony F55. Vislink will provide a custom made mounting solution for your camera type. Along with Vislink’s UltraDecoder, the UltraLite provides a complete end to end live 4K UHD, easy to implement, cost effective wireless video solution.
Key Features Capable of allowing 4K UHD live wireless
video using existing RF infrastructure Compact and Lightweight Utilises latest HEVC advanced encoding
techniques UltraLite system comprises of a UltraLite
module and UltraDecoder to allow an end to end 4K UHD solution
Typical Applications Live wireless 4K UHD transmission Sports Coverage Event Coverage
Video Parameters
Audio Parameters
Outputs
Environment & Physical
Video Encoder Profiles
4K UHD Main 10 - 8/10bits 4.2.0 Main 4.2.2 10 – 8/10 bits 4.2.0 /
4.2.2 1.0 - 25Mbps
Video Inputs
2 SFP+ module slots supporting electrical and optical interfaces carrying:
4 x 3G-HDSDI (UHD)
Video Formats
4K UHD 2160p / 23.98 / 24 / 25 / 29.97 / 30 /
50 / 59.94 / 60
Audio Encoder
ISO 14496-3 2006 (HE-AAC) 8 pairs
Audio Inputs
Embedded
ASI
Dimensions
111.5mm width 33mm height 191mm deep
Weight
570g
Temperature
Operational: 0°C to +50°C (32°F to 122°F)
Storage: –20°C to +70°C (–4°F to 158°F)
Power
10 - 36V DC Less than 25 Watts
16-Apr-16 Rev 1.0 learn more at vislink.com
All dimensions in mm
Latency
System Latency – Approx. 900ms – 1Sec
Note: Suitable for applications such as Camera back, Airborne and On-boards
Key Features
■ Capable of decoding 4K UHD, HD & SD video ■ The product uses the latest advanced HEVC decoding techniques to offer 50% bit rate reduction compared to H.264
■ The ability to decode one 4K UHD or 1 HD video channel
■ The UltraDecoder can be used with the UltraCoder to provide a complete end to end encode and decode solution
Typical Applications
■ SNG ■ ENG ■ IP Networks
UltraDecoderHEVC DecoderBeing the lightest in the world, the Vislink UltraDecoder is the new 1RU, ½ rack HEVC & 4K UHD capable decoder. The Product uses the latest advanced HEVC decoding techniques to offer up to 50% bit rate reduction compared to H.264, resulting in the delivery of high quality video at low bit rates. Along with Vislink's UltraCoder this product provides a complete end to end HEVC & 4K UHD encode and decode solution.
SPECIFICATIONS
© 2015 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to
change specifications without notice. Please contact your representative to confirm current specifications.
www.vislink.com • [email protected]
RD001918 Rev 422/01/16 ENG
VIDEO PARAMETERS
Video Decoder Profiles ■ 4K UHD
■ Main 10 - 8/10bits 4.2.0 ,1.0- 50Mbps
■ HD ■ Main 10 - 8/10bits 4.2.0 1.0 - 50Mbps
■ SD ■ 4.2.0 Main 0.5 - 6Mbps
Video Formats ■ 480i / 29.97 ■ 576i / 25 ■ 720p / 50/ 59.94 / 60 ■ 1080i / 50/ 59.94 / 60 ■ 1080p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
■ 2160p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
IP INTERFACES
VIDEO
Type: ■ 10 / 100 / 1000 Base–T Ethernet
Protocol ■ IEEE802.3 Ethernet ■ Encapsulation for ASI – RTP (RFC2250), ARP, IPv4, IGMPv2/3, TCP/UDP
■ MultiCast
AUDIO PARAMETERS
Audio Decoder ■ ISO 14496-3 2006 (HE-AAC)
Audio Outputs ■ Embedded 4 pairs in SDI ■ Embedded 4 pairs in HDMI
ENVIRONMENT & PHYSICAL
Dimensions ■ 210mm wide by 350mm deep (8.27” wide by 13.78” deep)
■ 1RU, ½ rack
Weight ■ 1.9kg approx (4 lbs)
Temperature ■ Operational: 0°C to +50°C(32°F to 122°F)
■ Storage: –20°C to +70°C (–4°F to 158°F)
Power ■ <100VA ■ 90 to 264 Vac ■ 50/60 Hz
FLEXIBILITY
Remote Control ■ Ethernet
■ HTTP ■ SNMP
Outputs ■ HDMI 1.4 (UHD) ■ Mini BNC (SD & HD) X 2 ■ RJ45 (IP) ■ BNC (ASI)
PU
BL
IC
SA
FE
YVIS
LINK N
ews and Entertainm
ent
OverviewThe L3211 Barrel Booster has been specifically tailored for wireless camera back applications. Designed to fit directly onto the RF output from the Link range of transmitters, this unit is small, lightweight and easy to use. This amplifier includes ALC (Automatic Level Control) in order to provide a constant RF output power for all transmitter power level settings. The L3211 has a wide DC operating range (9-28V) and can be powered via the RF input connector* or using the Lemo power cables supplied with the unit. These power cables allow the option to connect to the Lemo power socket on the wireless transmitter or to the D-Tap adaptor from an IDX or Anton Bauer battery plate.
Incorporating LDPD (Link Digital Pre-Distortion) for improved adjacent channel rejection, integral harmonic filtering and a power save mode this amplifier is a must have addition to any wireless camera system where extended range is required.
* Switchable phantom power to the L3211 barrel booster is provide in the L1530-1927 RF module.
L3211Barrel Booster
Barrel Booster
Features
• Boosts RF transmitter power for extended range.
• Provides optimal trade-off between transmit power, DC power consumption and spectral efficiency.
• Small, light-weight & robust construction.
• Designed to mate directly to the Link range of camera back transmitters.
• Incorporates LDPD (Link Digital Pre-Distortion) for improved adjacent channel rejection.
• Includes input and output RF harmonic filters to ensure regulatory compliance.
• ALC (Automatic Level Control) maintains a constant RF output for all transmitter settings.
• Can also be operated as a fixed gain power amplifier for user defined RF output powers.
• RF output fully protected against mis-match damage.
• Powered via RF input connector or external Lemo connector.
• Power save mode when RF muted.
• Wide DC (9-28V) operating range.
• Tri-colour LED indicates unit status and RF output mode setting.
www.vislink.com© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. Document 04 / 02 / 2014
SpecificationsElectrical At 20±5°C ambient
Parameter Conditions Min Typ Max Units Comment
Frequency Range L3211-2027 2000 – 2700 MHz
L3211-6475 6400 - 7500 MHz Does not include LDPD
RF Output Power ALC Mode +28 (0.63) 28.75(0.75) +30 (1.0) dBm (W)
RF Input Power Range ALC Mode +10 (10) – +24 (250) dBm (mW)
Gain Fixed Gain Mode 10 – 15 dB
Spectral Regrowth Adjacent Channel – – -40 dBc EN 302 064-1 §7.3.4
Alternate Channe – – -46
Spurious 25MHz – 1GHz – – 0.25(-36) nW(dBm) EN 302 064-1 §7.4.6
1GHz – 27GHz – – 1(-30)
Return Loss – 10 – dB
RF InputDamage Level
CW +27 (0.5) dBm (W)
Pulsed +36 (4)
Static Protection Direct Discharge 8 kV IEC61000-4-2
Air Discharge 15
Temperature Rise Above Ambient 32 ºC IEC60417-5041
Supply Voltage 9 28 V
Power Consumption RF OFF 7.5 W
RF ON 14 W
Compliance
Standard Class/Category Version
ETSI EN 302 064-1 Category 1 V1.1.2
ETSI EN 301 489-28 Class B V1.1.1
EnvironmentalOperating Temperature (Portable Equipment)• -10°C to +50°C
Storage Temperature• -20°C to +80°C
Humidity • 95%• Non-Condensing
IP Rating• 54
Mechanical RF/DC Input Connector• 50Ω N Type (M)
RF Output Connector• 50Ω N Type (F)
Power Connector• 6-Pin Lemo Socket
Phantom Power • Applied to RF Input Connector
Weight• 0.32Kg
Length• 106mm (inc. connectors)
Diameter• 62mm
Status Indicator• Green (DC Power/ALC OK)• Orange (DC Power OK/Fixed Gain)
Power Connector 6-Pin Lemo SocketL3211 Socket• EEG.OB.306 CLV
Mating Plug• FGG.0B.306 CLA (straight)• FHG.0B.306 CLA (right-angle)
Pin Out• 1 & 2: GND, 3 & 4: +VE, 5 & 6: NC
Note: When operating the barrel booster in the ‘Fixed Gain’ mode the RF output power is no longer controlled by the barrel booster’s ALC and therefore it is the operator’s responsibility to ensure that the RF drive into the barrel booster is at an appropriate level not to cause over-drive or damage and to maintain regulatory compliance.
Hot surface, do not touch barrel booster heat sink surface during operation.
Optional power cables are available as listed below
9003434 Barrel Booster ALC Power Cable (Lemo straight)
9003435 Barrel Booster ALC Power Cable (IDX D-TAP)
9003437 Barrel Booster ALC Power Cable (Anton Bauer P-TAP)
9003438 Barrel Booster ALC Power Cable (Lemo right-angle)
9007896 Barrel Booster ALC Power Cable (XLR 3pin)
9008305 Barrel Booster Power Cable (Fixed Gain Lemo)
9008304 Barrel Booster Power Cable (Fixed Gain IDX D Tap)
9011941 Barrel Booster Power Cable (75cm un-terminated)
L3025DownConverter
Features• A key component of the Link
Wireless Camera System, but also suitable for use in third party systems
• Performance optimized for use with DVB-T/LMS-T/SCM-Q COFDM reception
• Very high dynamic range for weak signal reception with co-located high-level signals
• Longer cable runs between down-converter and receiver are permissible in high gain mode
• Front-end filter reduces overloading from UHF transmissions
• Antenna port protected against damage from high-power transmitters and static discharge
• Small and light-weight to allow easy pole mounting
• Full protection against water and dust (IP65) for outdoor installations
• Tri-colour LED indicates unit status and gain mode setting
L9972 Mounting Bracket
www.vislink.com© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations.
Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. Doc L3025 V16
Specifications
Gain Switch
GeneralAntenna Input: . . . . . . N-Type (F) 50ΩUHF Output: . . . . . . . . . . BNC (F) 75ΩNoise Figure: . . . . . . . . . . . . . . <3dB*Phase Noise: –90dBc/Hz @ 10kHz offsetSpurious: . . . . . . . . . . . . . . <-60 dBmO1P3: . . . . . . . . . . . . . . . . . >26 dBmOP1dB: . . . . . . . . . . . . . . . . >14 dBmImage/Half-IF Rejection: . . . >60dBc
Compliance:CE (EN302064 EN301489 & ES202239)FCC . . Static Discharge (IEC61000-4-2)
Environmental:Temperature: . . –10° C to +55°C IP65 [14° F to 122° F]Power supply: . . . . . . . 12 .5 to 24V DC (via UHF output connector)Power consumption: . . . . . . . up to 5W (High gain mode)
The L3025 is powered via the output cable .
A tri-colour LED indicates unit status: • GREEN – Low Gain Setting, • ORANGE – High Gain Setting, • RED – Unit Error .
In the low gain mode, the down-converter provides sufficient gain to compensate for up to 20dB of cable loss between the down-converter and the receiver . Typically, with good quality cable, this corresponds to up to 100m . In the high gain mode this can be extended to 150m .
*Note: The L3025-3239E noise figure is specified as <5 .5dB above 3 .7GHz
Other bands are available, contact us with your requirements
Model FrequencyGain Mode Physical (Excluding Bracket)
Normal High Dimensions Weight
L3025 - 1415 1 .435 - 1 .525 GHz 28 dB . (typ .) 43 dB . (typ .) H - 153 mm [6"]W - 65 mm [2 .6"]D - 25 mm [1"]
250g [0 .56 lbs]
L3025 - 1718 1 .785 - 1 .805 GHz 30 dB . (typ .) 45 dB . (typ .)
L3025 - 1927E 1 .9 - 2 .7 GHz 26 dB . (typ .) 41 dB . (typ .)
L3025 - 2732 2 .7 - 3 .2 GHz 26 dB . (typ .) 41 dB . (typ .)
L3025 - 3239E* 3 .2 - 3 .9 GHz 30 dB . (typ .) 41 dB . (typ .)
L3025 - 4450 4 .4 - 5 .0 GHz 24 dB . (typ .) 39 dB . (typ .)
L3025 - 5459 5 .4 - 5 .925 GHz 26 dB . (typ .) 41 dB . (typ .)
H - 168 m[6 .1"]W - 65 mm [2 .6"]D - 25 mm [1"]
300g [0 .66 lbs]L3025 - 6471 6 .425 - 7 .125 GHz 38 dB . (typ .) 53 dB . (typ .)
L3025 - 6875 6 .8 - 7 .5 GHz 38 dB . (typ .) 53 dB . (typ .)
PHASE ENGENHARIA
Wireless Camera Systems
EXCLUSIVE REPRESENTATIVE:
PHASE Engenharia Ind. e Com. Ltda.
Av. Olegário Maciel 231, Lojas 101 a 105
Barra da Tijuca | Rio de Janeiro, RJ | CEP 22 621 200
Tel +55.21.2493.0125
Av. Ibirapuera 2.907, Conj. B306 & 7 - Ed. Conv. Corp. Plaza – Torre C
Indianópolis | São Paulo-SP | CEP 04029-200
Tel +55 11 3589-0125
[email protected] | www.phase.com.br