pfc price list april 18 single page · wavecut technology for mpp film with heavy edge self healing...

www.epcos.com

Price List PFC and Key Components

Capacitors stwith effect from 1 April 2018

Nashik Plant

The Company: EPCOS India Pvt. Ltd.

EPCOS India Private Limited (EIPL) is a Group company of TDK Corporation, Japan. EPCOS emerged in 1999 as a successor to the joint venture Siemens Matsushita Components and the former Siemens passive Components and Electron Tubes Group. The company has been selling electronic components in India since the early 60s. Today, all business activities in India come under the umbrella of EPCOS India Private Limited, having Registered head office at Kalyani Plant in West Bengal and regional offices in Mumbai, Delhi, Bengaluru and Kolkata. In mid-90s EPCOS significantly stepped up its commitment to India by opening new manufacturing facility at Kalyani in West Bengal and Nashik in Maharashtra. And now, EPCOS again reinforced its trust in India by opening up one more manufacturing facility at Bawal in Haryana.

EPCOS in India is involved in design, manufacturing and marketing of a broad range of top quality products such as AC-mfd capacitors, LV Power Factor Correction Capacitors (resin, inert gas and oil filled designs), Key Components required for PF

correction system, PF correction systems (APFC Panels), MV Capacitors, MV Capacitors Switch, MV Reactive Power Compensation systems, Power Electronic Capacitors, DC Capacitors, MPP film and high performance ferrite cores. Nashik factory also houses the Global R&D for Film metallisation, AC and PFC Products and Systems while Kalyani is Centre of Excellence for soft ferrites. EPCOS India also services the demands of customers for a wide variety of components from global factories of TDK.

EPCOS India has a strong sales and marketing team spread over the country. Our strength in market is based on the technical competence and marketing experience of our sales force. It is backed up by a very efficient and dedicated Channel Partner network to cover entire India and some neighbouring countries.

About TDK Corporation:TDK is one of the leading electronic component manufacturers in the world.

Innumerous types of electronic components are the building blocks that sustain advanced applications in our modern world. TDK is a leading manufacturer of such components. Operating on a worldwide scale, TDK has R & D and manufacturing bases in Japan, the Asian region, Europe and America.

TDK Corporation was founded in 1935 in Japan to commercialize the world's first invented ferrite. The spirit of creating entirely new things of value by starting at the fundamental level of the material has defined TDK from the beginning, and it still is the trait that sets the company apart.With a forward-looking vision, TDK endeavors to protect the global environment and make innovation work for the betterment of mankind. The company is constantly striving to contribute to the industry and to society at large

Price List: Index

Product Page no.

l SquareCap Capacitors 4

l PhiCap Capacitors 7

l PhiCap HD Capacitors 8

l PhaseCap Capacitors 9

l PhaseCap Energy HD Capacitors 11

l PhaseCap SHD Capacitors 13

l LT-APP Capacitors 15

l Power Factor Controllers 17

l Capacitor Duty Contactors and TSM 19

l Detuned Filter Reactors 20

l AgriCap Capacitors 21

HSN Description Rate of GST

8532 Power Capacitors-AC and PFC 18%

8504 Harmonic Filter Reactor

8536 Power Factor Controller (Relay)

8536 Capacitor Duty Contactors

8538 PFC Thyristor Switching Module 18%

18%

18%

18%

GST Tax Structure

PhiCap Capacitor

Rectangular box type, self standing units. Modular construction with sheet metal enclosure.

Conformance to Standards

Single units up to 50 KVAr.Voltage: 415V to 525V.

ENDC: EPCOS Normal Duty Capacitor for normal inductive loads. EHDLL: EPCOS Heavy Duty Long Life Capacitor for loads exhibiting some amount of non-linearity, medium size industries.

SHDC: EPCOS Super Heavy Duty Capacitor for non-linear arduous and fluctuating loads.

Manufactured using state-of-art metalisation process for MPP film with heavy edge. Self healing property. Low energy consumption.

Safety device in the form of pressure sensitive (over pressure) mechanical interrupter. Simplified modular construction using hermetically sealed single phase basic capacitor cells.Easy and quick reparability at site.Temp class: -10/D.

Specification:l

Range:l

l

Available in three designs:l

l

l

Features:l

l

l

l

l

l

l

l

IS 13340.

E

PU resin as impregnant.

SquareCap Capacitor PhaseCap Capacitor

Important Information: 1

l

lower power costs.- Power factor correction reduces the reactive power in a system. - Power consumption and thus power costs drop in proportion.

l Effective use of installation An improved power factor means that an electrical installation operates more economically (higher effective power for the same apparent power).

Fast return on investment through l Improved voltage quality.

l Reduced voltage drops.

l Optimum cable design. - Cable cross-sections can be reduced with improvement of power factor (less current). In existing installations for instance, extra or higher power can be transmitted.

l Reduced transmission losses. - The transmission and switching devices carry less current, i.e. only the effective power, meaning that the ohmic losses in the leads are reduced.

Benefits of Power Factor Correction

Stud mounting cylindrical type having very good KVAr to volume ratio.

Conformance to Standards IEC 60831-1 & 2 IS 13340

Single unit up to 33.1 KVArVoltage: 220V to 525V

Normal duty for linear loads.Heavy duty for non-linear loads

(up to

Manufactured using state-of-art metalisation process for MPP film with heavy edge Self healing property Low energy consumption

Safety device in the form of pressure sensitive (over pressure) mechanical interrupterTemp class : -10/D.

Specification :l

Range :l

l

Available in two designs :l

l

Features : l

l

l

l

l

l

Soft biodegradable resin as impregnant

525V)

A hi-tech capacitor with stud mounting Cylindrical construction with inert gas impregnated winding having very good

Conformance to StandardsIEC 60831-1 & 2

units from 5 to 33 KVArPhaseCap up to 56 KVArVoltage : 230V to V

Manufactured using state-of-art wavecut technology for MPP film with heavy edge Self healing property Low energy consumptionCapable of withstanding high inrush

eakagein the form

of pressure sensitive (over pressure) mechanical interrupterCompact size and light weightTemp class: -40/D

A modified version of PhaseCap capacitor with connection cable, suitable for long-term outdoor applications and for mounting on the pole.

inrush current capability and over current capability (up to 1.8 IR).

PhaseCap Energy Heavy Duty :Single

690(800/1000V on request)

current up to 400.IRDry-type, freedom from oil lThree phase safety device

Specification :l

Range :l

l

Features : l

l

l

l

l

l

l

l

PoleCap Capacitor :

4

5

Rating Description Material Code IR CN H x W x D Packing MOQ MRP/

KVAr A mF mm Units Unit Rs.

SquareCap Capacitors

SquareCap ENDC - 415 V(AC) 3PH, 50Hz (Series B32457)

SquareCap ENDC - 440 V(AC) 3PH, 50Hz (Series B32457)

SquareCap EHDLL - 415 V(AC) 3PH, 50Hz (Series B32459)



5 SQR ENDC 415V 50HZ-5KVAR 3PH B32457L4005A 11 6.96 3 x 31 215 x 185 x 60 1 5 1543


15 SQR ENDC 415V 50HZ-15KVAR 3PH B32457L4015A 11 20.87 3 x 92.5 300 x 240 x 80 1 5 4179

25 SQR ENDC 415V 50HZ-25KVAR 3PH B32457L4025A 11 34.78 6 x 77 300 x 240 x160 1 2 6966

1 New SQR ENDC 440V 50Hz-1KVAR 3PH B32457P5001A 11 1.31 3 x 5.5 95 x 125 x 45 1 40 329

2 New SQR ENDC 440V 50Hz-2KVAR 3PH B32457P5002A 11 2.62 3 x 11 120 x 125 x 45 1 40 588

3 New SQR ENDC 440V 50Hz-3KVAR 3PH B32457P5003A 11 3.94 3 x 16.5 120 x 145 x 55 1 40 882

4 New SQR ENDC 440V 50Hz-4KVAR 3PH B32457P5004A 11 5.25 3 x 22 140 x 145 x 55 1 20 1176




7.5 SQR ENDC 440V 50HZ-7.5KVAR 3PH B32457L5007A511 9.84 3 x 41.5 300 x 240 x 80 1 5 2124



12.5 SQR ENDC 440V 50HZ-12.5KVAR 3PH B32457L5012A511 16.4 3 x 69 300 x 240 x 80 1 5 3317





5 SQR EHDLL 415V 50HZ-5KVAR 3PH B32459L4005A 11 7 3 x 31 215 x 185 x 60 1 6 2,248

10 SQR EHDLL 415V 50HZ-10KVAR 3PH B32459L4010A 11 13.91 3 x 62 300 x 240 x 80 1 4 4,051




1 SQR EHDLL 440V 50HZ-1KVAR 3PH B32459L5001A 11 1.31 3 x 5.5 170 x 125 x 45 1 24 525


3 SQR EHDLL 440V 50HZ-3KVAR 3PH B32459L5003A 11 3.94 3 x 16.5 215 x 185 x 60 1 20 1,576




7.5 SQR EHDLL 440V 50HZ-7,5KVAR 3PH B32459L5007A511 9.84 3 x 41.5 300 x 240 x 80 1 4 3,094



12.5 SQR EHDLL 440V 50HZ-12,5KVAR 3PH B32459L5012A511 16.4 3 x 69 300 x 240 x 80 1 4 4,822






5.5 SQR EHDLL 480V 50Hz-5.5KVAR 3PH B32459L8005A561 6.6 3 x 25.3 215 x 185 x 60 1 4 2,382



12.5 SQR EHDLL 480V 50HZ-12,5KVAR 3PH B32459L8012A561 14.4 3 x 58 300 x 240 x 80 1 4 5,063



6

Rating Description Material Code IR CN H x W x D Packing MOQ MRP/


SquareCap Capacitors


16.6 SQR EHDLL 480V 50Hz-16.6KVAR 3PH B32459L8016A661 20 3 x 76.4 300 x 240 x 160 1 4 6,724








12.5 SQR EHDLL 525V 50HZ-12.5KVAR 3PH B32459L6012A511 13.7 3 x 48.1 300 x 240 x 80 1 4 5,063










5 SQR ESHDC 415V 50HZ-5KVAR 3PH B32455L4005A 11 6.96 3 x 31 300 x 240 x 80 1 4 3,596


15 SQR ESHDC 415V 50HZ-15KVAR 3PH B32455L4015A 11 20.87 6 x 46.5 400 x 225 x 155 1 4 9,061



1 SQR ESHDC 440V 50HZ-1KVAR 3PH B32455L5001A 11 1.31 3 x 5.5 270 x 170 x 55 1 10 930




7.5 SQR ESHDC 440V 50HZ-7.5KVAR 3PH B32455L5007A511 9.84 3 x 41.5 405 x 225 x 80 1 4 4,950


12.5 SQR ESHDC 440V 50HZ-12.5KVAR 3PH B32455L5012A511 16.4 3 x 69 405 x 225 x 80 1 4 7,191









6.6 SQR ESHDC 525V 50Hz-6.6KVAR 3PH B32455L6006A611 7.3 3 x 25.4 405 x 225 x 80 1 4 4,574

10 SQR ESHDC 525V 50HZ-10KVAR 3PH B32455L6010A 11 11 3 x 38.5 405 x 225 x 80 1 4 6,041

13.2. SQR ESHDC 525V 50Hz-13.2KVARr 3PH B32455L6013A211 14.5 3 x 50.8 405 x 225 x 80 1 4 7,974



33.1 SQR ESHDC 525V 50Hz-33.1KVAR 3PH B32455L6033A111 36.4 12 x 32 450 x 325 x 225 1 2 19,995



SquareCap ESHDC - 415 V(AC) 3PH, 50Hz (Series B32455)




7

Rating Description Material Code IR CN Packing MOQ MRP/


d x h

PhiCap Capacitors

PhiCap Normal Duty - 415 V(AC) 3PH, 50Hz (Series B32343 and B32344)

5 PhiCap ROU 415V 50/60Hz-5/6KVAR 3PH B32343L4052A 10 6.96 3 x 31 63.5 x 152 12 12 1,215

10 PhiCap ROU 415V 50/60Hz-10/12KVAR 3PH B32344B4102A 10 13.91 3 x 62 88.4 x 195 1 4 2,341

12.5 PhiCap ROU 415V 50/60Hz-12,5/15KVAR 3PH B32344B4122A510 17.39 3 x 77 88.4 x 270 1 4 2,927

15 PhiCap ROU 415V 50/60Hz-15/18KVAR 3PH B32344B4152A 10 20.87 3 x 92.5 88.4 x 270 1 4 3,512



1 PhiCap ROU 440V 50/60Hz-1/1,2KVAR 3PH B32343L4012A 40 1.31 3 x 5.5 53 x 117 12 12 287

1.5 PhiCap ROU 440V 50/60Hz-1,5/1,7KVAR 3PH B32343L4012A540 2 3 x 8.2 53 x 117 12 12 430

2 PhiCap ROU 440V 50/60Hz-2.1/2.5KVAR 3PH B32343L4021A540 2.8 3 x 11. 553 x 117 12 12 574

2.5 PhiCap ROU 440V 50/60Hz-2,5/3KVAR 3PH B32343L4022A540 3.3 3 x 13.7 63.5 x 129 12 12 717

3 PhiCap ROU 440V 50/60Hz-3/3,6KVAR 3PH B32343L4032A 40 3.9 43 x 16.5 63.5 x 129 12 12 861

4 PhiCap ROU 440V 50/60Hz-4,2/5KVAR 3PH B32343L4051A 40 5.5 13 x 23 63.5 x 129 12 12 1,148

5 PhiCap ROU 440V 50/60Hz-5/6KVAR 3PH B32343L4052A 40 6.5 63 x 27.5 63.5 x 152 12 12 1,157

6 PhiCap ROU 440V 50/60Hz-6,0/7,2KVAR 3PH B32344B4071A540 7.8 73 x 33 78.4 x 195 12 12 1,338

7 PhiCap ROU 440V 50/60Hz-7/8,4KVAR 3PH B32344B4072A 40 9.2 3 x 38.5 78.4 x 195 1 6 1,561

7.5 PhiCap ROU 440V 50/60Hz-7,5/9KVAR 3PH B32344B4072A540 9.84 3 x 41 78.4 x 195 1 6 1,672

8.3 PhiCap ROU 440V 50/60Hz-8,3/10KVAR 3PH B32344B4101A 40 10.89 3 x 45.5 78.4 x 195 1 6 1,851

9 PhiCap ROU 440V 50/60Hz-9/10,8KVAR 3PH B32344B4092A 40 11.8 3 x 49.5 78.4 x 195 1 6 2,007


12.5 PhiCap ROU 440V 50/60Hz-12,5/15KVAR 3PH B32344B4151A 40 16.4 3 x 68.5 88.4 x 270 1 4 2,787


16.7 PhiCap ROU 440V 50/60Hz-16,7/20KVAr 3PH B32344B4201A 40 21.9 3 x 91.5 88.4 x 345 1 4 3,724



28 PhiCap ROU 440V 50Hz-28kvar 3PH B32344B4282A 40 36.7 3 x 153.5 93.5 x 345 1 4 6,244


5 PhiCap ROU 480V 50/60HZ-5/6KVAR 3PH B32344B4052A 80 6.01 3 x 23 78.4 x 195 1 12 1,215

5.5 PhiCap ROU 480V 50/60Hz-5.5/6.6KVAR 3PH B32343L4052A580 6.6 3 x 25.3 63.5 x 188 8 12 1,288

8.3 PhiCap ROU 480V 50/60Hz-8.3/9.9KVAR 3PH B32344B4082A380 10 3 x 28.2 78.4 x 270 1 6 1,943

10.4 PhiCap ROU 480V 50/60HZ-10,4/12,5KVAR3PH B32344B4121A580 12.51 3 x 48 88.4 x 270 1 4 2,435

11.1 PhiCap ROU 480V 50/60Hz-11.1/13.3KVAR 3PH B32344B4112A180 13.4 3 x 51.1 78.4 x 270 1 4 2,599

12.5 PHICAP ROU 480V 50/60HZ-12,5/15KVAR 3PH B32344B4151A 80 15.04 3 x 58 88.4 x 345 1 4 2,927


15 PHICAP ROU 480V 50/60HZ-15/18KVAR 3PH B32344B4152A 80 18.04 3 x 69 88.4 x 345 1 4 3,512

16.6 PhiCap ROU 480V 50/60Hz-16.6/19.9KVAR 3PH B32344B4162A680 20 3 x 76.5 88.4 x 345 1 4 3,887

20.8 PhiCap ROU 480V 50/60HZ-20,8/25KVAR 3PH B32344B4251A 80 25.02 3 x 96 88.4 x 345 1 4 4,870




6.6 PhiCap ROU 525V 50/60Hz-6.6/7.9KVAR 3PH B32343L5062A620 7.3 3 x 25.4 63.5 x 270 8 12 1,545

8.3 PhiCap ROU 525V 50/60Hz-8.3/9.7KVAR 3PH B32344B5082A320 9.13 3 x 32 88.4 x 270 1 6 1,943

12.5 PhiCap ROU 525V 50/60HZ-12,5/15KVAR 3PH B32344B5151A 20 13.75 3 x 48 88.4 x 270 1 4 2,927

13.2 PhiCap ROU 525V 50/60Hz-13.2/15.8KVAR3PH B32344B5132A220 14.5 3 x 50.8 88.4 x 270 1 4 3,091

PhiCap Normal Duty - 440 V(AC) 3PH, 50Hz (Series B32343 and B32344)

PhiCap Normal Duty - 480 V(AC) 3PH, 50Hz (Series B32344)

PhiCap Normal Duty - 525 V(AC) 3PH, 50Hz (Series B32344)

16.7 PhiCap ROU 525V 50/60Hz-16.7/20KVAR 3PH B32344B5162A720 18.37 3 x 64 88.4 x 345 1 4 3,910

8

16.7 PhiCap ROU 525V 50/60Hz-16.7/20KVAR 3PH B32344B5162A720 18.37 3 x 64 88.4 x 345 1 4 3,910 20.8 PhiCap ROU 525V 50/60Hz-20.8/25KVAR 3PH B32344B5202A820 22.87 3 x 80 93.5 x 345 1 4 4,870 26.5 PhiCap ROU 525V 50/60Hz-26.5/31.8KVAR 3PH B32344B5262A520 29.5 3 x 102.1 121.5 x 325 1 2 6,205 33.1 PhiCap ROU 525V 50/60Hz-33.1/39.7KVAR 3PH B32344B5332A120 36.4 3 x 127.5 121.5 x 325 1 2 7,750

1 PhiCap HD ROU 440V 50/60Hz-1/1,2KVAR 3PH B32447A4012B 40 1.3 3 x 5. 553 x 117 12 12 440

2 PhiCap HD ROU 440V 50/60Hz-2/2,4KVAR 3PH B32447A4022B 40 2.6 23 x 12.5 63.5 x 129 12 12 879

3 PhiCap HD SIG 440V 50/60Hz-3/3,6KVAR 3PH B32448A4032B 40 3.9 43 x 16.5 78.4 x 195 1 6 1,319

4 PhiCap HD SIG 440V 50/60Hz-4/4,8KVAR 3PH B32448A4042B 40 5.2 53 x 22 78.4 x 195 1 6 1,759

5 PhiCap HD SIG 440V 50/60Hz-5/6KVAR 3PH B32448A4052B 40 6.5 63 x 27.5 78.4 x 195 1 6 1,979


7.5 PhiCap HD SIG 440V 50/60Hz-7,5/9KVAR 3PH B32448A4072B540 9.8 43 x 41.5 88.4 x 270 1 6 2,860


10 PhiCap HD SIG 440V 50/60Hz-10/12KVAR 3PH B32448A4102B 40 13.12 3 x 55 88.4 x 270 1 4 3,813

12.5 PhiCap HD SIG 440V50/60Hz-12,5/15KVAR 3PH B32448A4122B540 16.4 3 x 68.5 93.5 x 270 1 4 4,766


20 PhiCap HD SIG 440V 50Hz-20KVAR 3PH B32448A4202B840 26.24 3 x 109.6 121.5 x 280 1 4 7,626

25 PhiCap HD SIG 440V 50Hz-25KVAR 3PH B32448A4252B 40 32.8 3 x 137 121.5 x 325 1 4 9,533

30 PhiCap HD SIG 440V 50Hz-30KVAR 3PH B32448A4302B 40 39.4 3 x 164.5 142 x 325 1 4 11,439

5 PhiCap HD SIG 480V 50/60HZ-5/6KVAR 3PH B32448A4052B 80 6.01 3 x 23 78.4 x 195 1 6 2,077

5.5 PhiCap HD SIG 480V 50/60Hz-5.5KVAR 3PH B32448A4052A580 6.6 3 x 25.3 78.4 x 195 1 6 2,202

8.3 PhiCap HD SIG 480V 50/60Hz-8.3KVAR 3PH B32448A4082A380 10 3 x 38.2 88.4 x 270 1 6 3,323

10 PhiCap HD SIG 480V 50/60HZ-10/12KVAR 3PH B32448A4102B 80 12.03 3 x 46 88.4 x 270 1 4 4,004

11.1 PhiCapHD SIG 480V 50/60Hz-11.1KVAR 3PH B32448A4112A180 13.4 3 x 51.1 88.4 x 270 1 4 4,444

12.5 PhiCapHD SIG 480V 50/60HZ-12,5/15KVAR 3PH B32448A4122B580 15.04 3 x 58 88.4 x 270 1 4 5,005

16.6 PhiCap HD SIG480V 50/60Hz-16.6KVAR 3PH B32448A4162A680 20 3 x 76.5 88.4 x 345 1 4 6,646

20 PhiCap HD SIG 480V 50HZ-20KVAR 3PH B32448A4202B880 24.06 3 x 95.8 121.5 x 280 1 4 8,008

22.1 PhiCap HD SIG 480V 50/60Hz-22.1KVAR 3PH B32448A4222A180 26.6 3 x 101.8 105.5 x 280 1 2 8,848

25 PhiCap HD SIG 480V 50HZ-25KVAR 3PH B32448A4252B 80 30.07 3 x 115.1 121.5 x 325 1 4 10,010

27.7 PhiCap HD SIG 480V 50Hz-27.7KVAR 3PH B32448A4272A780 33.3 3 x 127.6 121.5 x 325 1 2 11,091

30 PhiCap HD SIG 480V 50HZ-30KVAR 3PH B32448A4302B 80 36.09 3 x 138.1 121.5 x 325 1 2 12,011


6.6 PhiCap HD SIG 525V 50/60Hz-6.6/7.9k 3PH B32448A5062B620 7.3 3 x 25.4 88.4 x 195 1 1 2,643

7.5 PhiCap HD SIG 525V 50/60Hz-7.5/9k 3PH B32448A5072B520 8.2 3 x 28.9 88.4 x 195 1 1 3,003

10 PhiCap HD SIG 525V 50/60Hz-10/12KVAR 3PH B32448A5102B 20 11 3 x 38.5 78.4 x 270 1 1 4,004

12.5 PhiCap HD SIG 525V 50/60Hz-12.5/15k 3PH B32448A5122B520 13.7 3 x 48.1 88.4 x 270 1 1 5,005

13.2 PhiCap HDSIG 525V 50/60Hz-13.2/15.8k 3PH B32448A5132B220 14.5 3 x 50.8 88.4 x 270 1 1 5,285



20 PhiCap HD SIG 525V 50/60Hz-20/24KVAR 3PH B32448A5202B 20 22 3 x 77 121.5 x 280 1 1 8,008



30 PhiCap HD SIG 525V 50/60Hz-30/36KVAR 3PH B32448A5302B 20 33 3 x 115.5 121.5 x 325 1 1 12,011

33.1 PhiCap HDSIG 525V 50/60Hz-33.1/39.7k 3PH B32448A5332B120 36.4 3 x 127.5 142 x 325 1 1 13,253

PhiCap Normal Duty -525 V (AC) 3PH, 50Hz (Series B32344)

PhiCap Heavy Duty -440 V (AC) 3Pz, 50Hz (Series B32448)



Rating Description Material Code IR CN d x h Packing MOQ MRP/


PhiCap HD Capacitors

Low voltage APP power capacitors are non self-healing type capacitors designed and manufactured by using latest technology and high quality material. These capacitors employ a technique where in the dielectric comprises of both sides rough, hazy polypropylene film impregnated with a non PCB liquid. The fluid is biodegradable in environment. Electrodes are made of high purity, thin aluminum foils.

Conformance to Standard IS 13585

Up to 50 KVAr, in single unit. Higher ratings in form of banks. Available in Ratings of 440, 480 and 525V. Voltages up to 1000V on request.

Extended foil design.

Low energy consumption. Leakproof CRCA sheet steel Container. Provided with internal element fuse. Extremely robust construction, suitable for use in arduous applications including applications related to Tuned and Detuned Harmonic Filters. Suitable for indoor application.

Specification: l

l

Range: l

l

l

Features: l

l

l

l

l

l Temp class: -5/D.

LT - APP Capacitor

Maximum Admissible Overvoltage

Frequency (50 / 60 Hz) Max. voltage (V ) Max. duration Remarksrms

Line frequency 1.00 - V Continuous duty Highest mean during entire operating timeR

of capacitor; exceptions (see below) are

admissible for times of < 24 h

Line frequency 1.10 - V 8 h daily Line voltage fluctuationsR

Line frequency 1.15 - V 30 min daily Line voltage fluctuationsR



Line frequencySuch that current does not exceed maximum admissible figure (I max. = 1.3 x I )with harmonics R


10

PhaseCap Super Heavy Duty®

A hi-tech capacitor with stud mounting cylindrical construction having high inrush current capability and Over current capability (up to 2.0 IR).

Conformance to standards IEC 608 - 1 & 2, EN60831-1 & 2

5 to 33 KVAr.Voltage: 230V to

Manufactured using stat-of-art technology for MPP film with

heavy edgeSelf healing propertyLow energy consumption

Capable of withstanding high inrush currentVery Hi

the form of pressure sensitive (over pressure) mechanical interrupterCompact size and light weightSoft biodegradable resin as impregnant.

(Up to 500.IR)

31

690V(800/1000V on request)

wavecut

o oTemp class: -40 C to 60 C

(Up to 500.IR)gh life expectancy up to

2,00,000 operating hours (-40/D)Capable for 15000 switching per year to handle dynamic loadsThree phase safety device in

Specification :l

Range :l

Features :l

l

l

l

l

l

l

l

l

l

PhaseCap Energy Heavy Duty

A hi-tech capacitor with stud mounting Cylindrical construction with inert gas impregnated winding having very good

Conformance to StandardsIEC 60831-1 & 2

units from 5 to 33 KVArPhaseCap up to 56 KVArVoltage : 230V to V

Manufactured using state-of-art wave cut technology for MPP film with heavy edge Self healing property Low energy consumptionCapable of withstanding high inrush current Dry-type, freedom from oil leakage

safety device in the form of pressure sensitive (over pressure) mechanical interrupterCompact size and light weightTemp class: -40/D

inrush current capability and over current capability (up to 1.8 IR).

PhaseCap Energy Heavy Duty :Single

690(800/1000V on request)

up to 400 IR

Three phase

Specification :l

Range :l

l

Features : l

l

l

l

l

l

l

l

®

9

PhaseCap CapacitorsRating Description Material Code IR CN d x h Packing MOQ MRP/


PhaseCap -415 V(AC) 3PH, 50Hz (Series B25667 and B25669)

PhaseCap -440 V(AC) 3PH, 50Hz (Series B25667 and B25669)

PhaseCap -480 V(AC) 3PH, 50Hz (Series B25667)

PhaseCap -525 V(AC) 3PH, 50Hz (Series B25667)

5 PhaseCap 415V 50Hz 5KVAR 3PH B25667L4926A375 6.96 3 x 30.8 121.6 x 164 1 4 2,333

10 PhaseCap 415V 50Hz 10.4KVAR 3PH B25667L4197A375 13.91 3 x 64.1 121.6 x 164 1 4 4,496

12.5 PhaseCap 415V 50Hz 12.5KVAR 3PH B25667L4237A375 17.39 3 x 77 121.6 x 164 1 4 5,619

15 PhaseCap 415V 50Hz 15KVARr 3PH B25667L4277A375 20.87 3 x 92.5 121.6 x 164 1 4 6,743


25 PhaseCap 415V 50Hz 25KVAR 3PH B25667L4467A375 34.78 3 x 154.1 142 x 200 1 4 11,239

50 PhaseCap HD 415V 50Hz 50KVAR 3PH B25669L4927J375 69.56 3 x 308 142 x 350 1 2 22,478



7.5 PhaseCap 440V 50Hz 7.5KVAR 3PH B25667L4127A375 9.84 3 x 41.1 121.6 x 164 1 4 3,211

10.4 PhaseCap 440V 50Hz 10.4KVAR 3PH B25667L4177A375 13.65 3 x 57 121.6 x 164 1 4 4,453








5 PhaseCap 480V 50Hz 5KVAR 3PH B25667L4696A375 6.01 3 x 23 121.6 x 164 1 4 2,333







20 PhaseCap 480V 50Hz 20.8KVAR 3PH B25667L4287A375 24.06 3 x 95.8 142 x 200 1 4 8,991


28 PhaseCap 480V 50HZ 28KVAR 3PH B25667L4387A365 34 3 x 129 142 x 200 1 4 12,587

31 PhaseCap 480V 50Hz 31KVAR 3PH B25667L4427A375 37.29 3 x 143 142 x 200 1 4 13,936

6.25 PhaseCap 525V 50Hz 6.25KVAR 3PH B25667L5726A375 7 3 x 24.1 121.6 × 164 1 4 2,810


10 PhaseCap 525V 50Hz 10.4KVAR 3PH B25667L5127A375 11 3 x 40.1 121.6 x 164 1 4 4,496




20 PhaseCap 525V 50Hz 20.8KVAR 3PH B25667L5247A375 21.99 3 x 80.1 142 x 200 1 4 8,991



11

PhaseCap Energy HD CapacitorsRating Description Material Code IR CN Packing MOQ MRP/


d x h

PhaseCap Energy HD - 415 V(AC) 3PH, 50Hz (Series B25674L)




5 PhaseCap Energy HD 415V 50/60Hz 5/6KVAR 3PH B25674L4052J 15 7 3 x 30.8 75x164 1 1 2,333

6.3 PhaseCap Energy HD 415V 50/60Hz 6.3/7.6KVAR 3PH B25674L4062J315 8.8 3 x 38.8 75x164 1 1 2,832

7.5 PhaseCap Energy HD 415V 50/60Hz 7.5/9KVAR 3PH B25674L4072J515 10.4 3 x 46.2 75x200 1 1 3,372

8.3 PhaseCap Energy HD 415V 50/60Hz 8.3/10KVAR 3PH B25674L4082J315 11.5 3 x 51.1 75x200 1 1 3,731


15 PhaseCap Energy HD 415V 50/60Hz 15/18KVAR 3PH B25674L4152J 15 20.9 3 x 92.4 85x200 1 1 6,743



28.1 PhaseCap Energy HD 415V 50Hz 28.1KVAR 3PH B25674L4282J115 39.1 3 x 173.1 116x207 1 1 12,632

30 PhaseCap Energy HD 415V 50Hz 30KVAR 3PH B25674L4302J 15 41.7 3 x 184.8 116x207 1 1 13,487


5 PhaseCap Energy HD440V50/60Hz 5/6KVAR 3PH B25674L4052J 40 6.6 3 x 27.4 75x164 1 4 2,222

6 PhaseCap EnergyHD440V 50/60Hz6/7.2KVAR 3PH B25674L4062J 40 7.9 3 x 32.9 75x164 1 4 2,569

6.3 PhaseCap EnrgyHD440V50/60Hz6.3/7.6KVAR 3PH B25674L4062J340 8.3 3 x 34.5 75x164 1 4 2,697

7 PhaseCap EnrgyHD 440V50/60Hz 7/8.4KVAR 3PH B25674L4072J 40 9.2 3 x 38.4 75x200 1 4 2,997

7.5 PhaseCap EnergyHD440V50/60Hz 7.5/9KVAR 3PH B25674L4072J540 9.8 3 x 41.1 75x200 1 4 3,211

8 PhaseCap EnergyHD440V50/60Hz 8/9.6KVAR 3PH B25674L4082J 40 10.5 3 x 43.8 75x200 1 4 3,425

10 PhaseCap EnergyHD 440V50/60Hz10/12KVAR 3PH B25674L4102J 40 13.1 3 x 54.8 75x200 1 4 4,281

10.4 PhasCap EnergyHD440V50/60Hz10.4/12.5K 3PH B25674L4102J440 13.6 3 x 57.0 85x200 1 4 4,453

12.5 PhaseCap EnrgyHD440V50/60Hz12.5/15KVAR3PH B25674L4122J540 16.4 3 x 68.5 85x200 1 4 5,352

14.2 PhaseCap EnrgyHD440V50/60Hz14.2/17KVAR 3PH B25674L4142J240 18.6 3 x 77.8 85x200 1 4 6,080

15 PhaseCap EnergyHD440V50/60Hz15/18KVAR 3PH B25674L4152J 40 19.7 3 x 82.2 85x218 1 4 6,422

18.8 PhaseCap EngHD440V50/60Hz18.8/22.6KVAR 3PH B25674L4182J840 24.7 3 x 103.0 100x207 1 4 8,049

20 PhaseCap EnergyHD440V50/60Hz 20/24KVAR 3PH B25674L4202J 40 26.2 3 x 109.6 100x207 1 4 8,563

25 PhaseCap Energy HD440V50/60Hz25/30KVAR 3PH B25674L4252J 40 32.8 3 x 137.0 116x192 1 4 1,0704



5 PhaseCap EnergyHD 480V 50/60Hz 5/6KVAR 3PH B25674L4052J 80 6 3 x 23.0 75x164 1 4 2,333


7.5 PhaseCap EnergyHD480V50/60Hz 7.5/9KVAR 3PH B25674L4072J580 9 3 x 34.5 75x200 1 4 3,372

8.3 PhaseCap EnergyHD480V50/60Hz8.3/10KVAR 3PH B25674L4082J380 10 3 x 38.2 75x200 1 4 3,731

10.4 PhaseCap Eng HD480V50/60Hz 10.4/12.5KVAR 3PH B25674L4102J480 12.5 3 x 47.9 75x200 1 4 4,675

11 PhaseCap EnrgyHD480V50/60Hz11/13.2KVAR 3PH B25674L4112J 80 13.2 3 x 50.7 85x200 1 4 4,945

12.5 PhaseCap EnrgyHD480V50/60Hz12.5/15KVAR 3PH B25674L4122J580 15 3 x 57.6 85x200 1 4 5,619

13.8 PhaseCap Energy HD480V50/60Hz 13.8/16.6KVAR 3PH B25674L4132J880 16.6 3 x 63.5 85x200 1 4 6,204

15 PhaseCapEnergyHD480V50/60Hz 15/18KVAR 3PH B25674L4152J 80 18 3 x 69.1 100x207 1 4 6,743


20 PhaseCap EnergyHD480V50/60Hz 20/24KVARr3PH B25674L4202J 80 24.1 3 x 92.1 100x207 1 4 8,991

20.8 PhaseCap Energy HD480V50/60Hz 20.8/25k 3PH B25674L4202J880 25 3 x 95.8 116x207 1 4 9,351

22 PhaseCap EnrgyHD480V50/60Hz22/26.4KVAR 3PH B25674L4222J 80 26.5 3 x 101.3 116x207 1 4 9,890

25 PhaseCap Energy HD480V 50/60Hz 25/30k 3PH B25674L4252J 80 30.1 3 x 115.1 116x192 1 4 11,239

28.1 PhaseCap Energy HD 480V 50Hz28.1KVAR 3PH B25674L4282J180 33.8 3 x 129.4 116x207 1 4 12,632


5 PhaseCap Energy HD525V50/60Hz 5/6KVAR 3PH B25674L5052J 25 5.5 3 x 19.2 75x164 1 4 2,333


7.5 PhaseCap EnergyHD525V50/60Hz 7.5/9KVAR 3PH B25674L5072J525 8.2 3 x 28.9 75x185 1 4 3,372

Temperature Class of Capacitors (According IEC 60831-1)

Temperature Class Temperature of Air Surrounding the Capacitor

Maximum Maximum mean for 24 h Maximum mean for 1 year

O O O B 45 C 35 C 25 C

O O O C 50 C 40 C 30 C

O O O D 55 C 45 C 35 C

Capacitors are divided into temperature classes. Each class is represented by a number followed by a letter, e.g. -40/D. The number is the lowest ambient temperature at which a capacitor may operate. The upper limit temperature is indicated by the letter (see table above).

The useful life of a capacitor depends very much on temperature. Proper cooling of a capacitor must ensure that the maximum temperature is not exceeded, otherwise useful life is de-graded. When configuring a circuit, one should make sure that capacitors are not subjected to heat from adjacent

components (reactors, bus bars, etc.). Forced cooling is preferable for compact designs. And it is highly inadvisable to arrange capacitors directly above reactors. Exceeding specified temperature limits, may set in worst case the safety device out of operation.


12

Rating Description Material Code IR CN Packing MOQ MRP/


d x h



8.3 PhaseCap EnrgyHD525V50/60Hz 8.3/10KVAR 3PH B25674L5082J325 9.1 3 x 31.9 75x200 1 4 3,731

10.4 PhaseCp EngyHD525V50/60Hz10.4/12.5KVAR 3PH B25674L5102J425 11.4 3 x 40.0 85x185 1 4 4,675


13.2 PhseCap EngyHD525V50/60Hz13.2/15.8KVAR 3PH B25674L5132J225 14.6 3 x 50.8 85x200 1 4 5,934

15 PhaseCap EnergyHD525V50/60Hz 15/18KVAR R3PH B25674L5152J 25 16.5 3 x 57.7 85x218 1 4 6,743


20 PhaseCap EnergyHD525V50/60Hz 20/24KVAR 3PH B25674L5202J 25 22 3 x 77.0 100x224 1 4 8,991


25 PhaseCap EnergyHD525V50/60Hz 25/30KVAR 3PH B25674L5252J 25 27.5 3 x 96.2 116x207 1 4 11,239

26.5 PhasCap EnrgHD525V50/60Hz26.5/31.8KVAR 3PH B25674L5262J525 29.1 3 x 102.0 116x207 1 4 11,913

33.1 PhaseCap Energy HD525V 50Hz 33.1KVAR 3PH B25674L5332J125 36.4 3 x 127.4 136x192 1 4 14,880


10.4 PhaseCap Energy HD 690V 50/60Hz 10.4/12.5 KVAR 3PH B25674L6102J490 8.7 3 x 23.2 75x200 1 1 4,987

12.5 PhaseCapEnrgyHD690V50/60Hz12.5/15KVAR 3PH B25674L6122J590 10.5 3 x 27.9 85x200 1 1 5,994



25 PhaseCapEnergy HD690V50/60Hz25/30KVAR 3PH B25674L6252J 90 20.9 3 x 55.7 116x192 1 4 11,988

28 PhaseCap Energy HD 690V 50/60Hz 28KVAR 3PH B25674L6282J 90 23.4 3 x 62.4 116x207 1 1 13,427

PhaseCap CapacitorsEnergy HD

13

PhaseCap SHD CapacitorsRating Description Material Code IR CN Packing MOQ MRP/


d x h

PhaseCap SHD - 415 V(AC) 3PH, 50Hz (Series B25675L)



5 PhaseCap SHD 415V 50/60Hz 5/6KVAR 3PH B25675L4052J 15 7 3 x 30.8 75x164 1 4 3,292

6.3 PhaseCap SHD 415V 50/60Hz 6.37.6KVAR 3PH B25675L4062J315 8.8 3 x 38.8 75x164 1 1 3,998

7.5 PhaseCap SHD 415V 50/60Hz 7.5/9KVAR 3PH B25675L4072J515 10.4 3 x 46.2 75x200 1 1 4,759

10.4 PhaseCapSHD 415V50/60Hz10.4/12.5KVAR 3PH B25675L4102J415 14.5 3 x 64.1 75x200 1 1 5,430


15 PhaseCap SHD 415V 50/60Hz 15/18KVAR 3PH B25675L4152J 15 20.9 3 x 92.4 85x200 1 1 7,832



28.1 PhaseCap SHD 415V 50Hz 28.1KVAR 3PH B25675L4282J115 39.1 3 x 173.1 116x207 1 1 14,672

30 PhaseCap SHD 415V 50Hz 30KVAR 3PH B25675L4302J 15 41.7 1 1 15,664

33 PhaseCap SHD 415V 50Hz 33KVAR 3PH B25675L4332J 15 45.9 3 x 203.31 16x224 1 1 17,230

1 PhaseCap SHD 440V 50/60HZ 1/1.2KVAR 3PH B25675L4012J 40 1.3 3 x 5.5 53x117 1 1 627

2 PhaseCap SHD 440V 50/60HZ 2/2.4KVAR 3PH B25675L4022J 40 2.6 3 x 11.0 53x129 1 1 1,254

3 PhaseCap SHD 440V 50/60HZ 3/3.6KVAR 3PH B25675L4032J 40 3.9 3 x 16.4 53x129 1 1 1,881

4 PhaseCap SHD 440V 50/60HZ 4/4.8KVAR 3PH B25675L4042J 40 5.2 3 x 21.9 63.5x152 1 1 2,508




10.4 PhaseCapSHD440V 50/60Hz 10.4/12.5KVAR3PH B25675L4102J440 13.6 3 x 57 85x200 1 1 5,172

12.5 PhaseCapSHD 440V 50/60Hz 12.5/15KVAR 3PH B25675L4122J540 16.4 3 x 68.5 85x200 1 1 6,216







6.3 PhaseCap SHD 480V 50/60Hz6.3/7.6KVAR 3PH B25675L4062J 380 7.6 3 x 29.0 75x164 1 1 3,998

8.3 PhaseCap SHD 480V 50/60Hz 8.3/10KVAR 3PH B25675L4082J 380 10 3 x 38.2 75x200 1 1 5,267

10.4 PhaseCapSHD 480V 50/60Hz10.4/12.5KVAR 3PH B25675L4102J 480 12.5 3 x 47.9 75x200 1 1 5,430

11 PhaseCap SHD 480V50/60Hz 11/13.2KVAR 3PH B25675L4112J 80 13.2 3 x 50.7 85x200 1 1 5,743

12.5 PhaseCap SHD 480V50/60Hz 12.5/15KVAR 3PH B25675L4122J 580 15 3 x 57.6 85x200 1 1 6,527

13.8 PhaseCapSHD 480V50/60Hz13.8/16.6KVAR 3PH B25675L4132J 880 16.6 3 x 63.5 85x200 1 1 7,205


16.7 PhaseCapSHD 480V 50/60Hz 16.7/20KVAR 3PH B25675L4162J 780 20.1 3 x 76.9 100x207 1 1 8,720

18.7 PhaseCapSHD 480V50/60Hz 18.7/22.4KVAR3PH B25675L4182J 780 22.5 3 x 86.1 100x207 1 1 9,764


20.8 PhaseCap SHD 480V 50/60Hz20.8/25KVAR 3PH B25675L4202J 880 25 3 x 95.8 116x207 1 1 10,860

22 PhaseCapSHD 480V 50/60Hz 22/26.4KVAR 3PH B25675L4222J 80 26.5 3 x 101.3 116x207 1 1 11,487


28.1 PhaseCap SHD 480V 50Hz 28.1KVAR 3PH B25675L4282J 180 33.8 3 x 129.4 116x207 1 1 14,672



3 x 184.8 116x207

Power Factor Controllers:

Controller hunting: When putting thecapacitor bank into operation, it isrequired to avoid needless switchingcycles (means permanent switchingon and off of steps without significantchange of consumer loads). This socalled "controller hunting" wouldincrease the number of switchingoperations of the connected contactorsand capacitors, decrease theexpected life cycle (wear out) andresult, in worst case, in burstingand fire etc. This can be avoidedby a proper programming of thePF controllers with the actual systemparameters (current transformer prim.and sec., first KVAR step, control series,switching time).

Capacitor Duty Contactor:

Contactors are electromechanical switching elements used to switch Capacitors or Reactor and Capacitor in standard or de-tuned PFC system. Capacitor contactors with damping resistors make use of pre-switching auxiliary contacts. They close before the main contacts and pre-load the capacitor thus avoiding current peak values.

This influences positively the life expectancy of the capacitor significantly, in addition to the positive impact on the power quality (avoiding transient and voltage sags that otherwise may be caused by switching in capacitors).

Thyristor Modules (TSM)

For discharging the capacitors, special high-voltage resistors type EW-22 are required. Standard resistors cannot beused!In dynamic PFC systems discharge reactors cannot be used (this would be a short circuit of the high voltage DC)!

In PFC systems without filter circuit reactors current limiting reactors are required (e.g. BD-100) for the TSM.

For short circuit protection, super fast electronic fuses for protection of the thyristor are required, standard HRC fuses are not suitable.

Failure to follow cautions may result, worst case, in premature failures or physical injury.


14

PhaseCap SHD CapacitorsRating Description Material Code IR CN Packing MOQ MRP/


d x h




6.3 PhaseCap SHD 525V 50/60Hz 6.3/7.6KVAR 3PH B25675L5062J 325 6.9 3 x 24.2 75x164 1 1 3,998

8.3 PhaseCap SHD 525V 50/60Hz 8.3/10KVAR 3PH B25675L5082J 325 9.1 3 x 31.9 75x200 1 1 5,267

10.4 PhaseCap SHD525V50/60Hz 10.4/12.5KVAR 3PH B25675L5102J 425 11.4 3 x 40.0 85x185 1 1 5,430

12.5 PhaseCapSHD 525V 50/60Hz 12.5/15KVAR 3PH B25675L5122J 525 13.7 3 x 48.1 85x200 1 1 6,527

13.2 PhaseCapSHD 525V 50/60Hz13.2/15.8KVAR 3PH B25675L5132J 225 14.6 3 x 50.8 85x200 1 1 6,892





26.5 PhaseCapSHD525V 50/60Hz 26.5/31.8KVAR 3PH B25675L5262J 525 29.1 3 x 102.0 116x207 1 1 13,837

33.1 PhaseCap SHD 525V 50Hz 33.1KVAR 3PH B25675L5332J 125 36.4 3 x 127.4 136x192 1 1 17,283



10.4 PhaseCapSHD 690V50/60Hz10.4/12.5KVAR 3PH B25675L6102J 490 8.7 3 x 23.2 75x200 1 1 5,792


14.6 PhaseCapSHD 690V50/60Hz 14.6/17.5KVAR3PH B25675L6142J 690 12.2 3 x 32.5 100x207 1 1 8,131



28 PhaseCap SHD 690V 50/60Hz 28KVAR 3PH B25675L6282J 90 23.4 3 x 62.4 116x207 1 1 15,594

15

LT-APP CapacitorsRating Description Material Code Type Input IR (A) CN H x W x D MOQ MRP/

KVAr Voltage mF Units Rs.

LT - APP - 440V(AC) 3PH, 50Hz (Series B25160)



5 Cap unit 5KVAR,440V,50Hz,3-?,?,IF Comp B25160C4005T 40 LT APP 440 6.56 41.1 135 x 75 x 330 1 3,707

7.5 Cap unit 7.5KVAR,440V,50Hz,3-?,?,IF Comp B25160C4007T540 LT APP 440 9.84 61.65 135 x 85 x 330 1 5,334


12 Cap unit 12 KVAR,440V, 3Ø ? IF Compact B25160C4012T 40 LT APP 440 16.4 102.75 155 x 115 x 330 1 7,598

15 Cap unit 15KVAR, 440V,50Hz,3-?,?,IF Comp B25160C4015T 40 LT APP 440 19.68 123.31 75 x 115 x 330 1 9,114




40 Cap unit 40KVAR,440V,50Hz,3-?,?,IF Comp B25160C4040T 40 LT APP 440 52.49 329 275 x 115 x 455 1 21,735







11.1 Cap unit 11.1KVAR,480V,50Hz,3-??,IF Comp B25160C4011T180 LT APP 480 13.35 76.67 135 x 115 x 330 1 7,069



















10 Cap unit 10KVAR,525V,50Hz,3-?,?,IF Comp B25160C5010T 25 LT APP 525 11 57.74 210 x 115 x 230 1 6,615







26.5 Cap unit 26.5KVAR,525V,50Hz,3-??,IF Comp B25160C5026T525 LT APP 525 29.14 153 245 x 115 x 355 1 15,589


33.1 Cap unit 33.1KVAR, 525V,50Hz,3-??IF Comp B25160C5033T125 LT APP 525 36.4 191.11 210 x 115 x 455 1 18,484



53 Cap unit 53KVAR,525V,50Hz,3-?,?,IF Comp B25160C5053T 25 LT APP 525 58.29 306 295 x 115 x 455 1 25,594


Technical Data:l

l

l

l

l

l

l

Important Display parameters :l

l

l

l

l

l

l

Features :l

l

l

l

l

l

l

l

Steps - 4, 6 and 8 relay outputs Current Input - 1A or 5 A Supply Voltage - 110 VAC-550 VACMeasurement Voltage : 30...550 VAC(L-L/L-N)Operating temperature : 0 to 60 º CCompact 96 x 96 x 75 mm Adapter plate for 144 x 144 cut outcan be provided

VoltageReal time PFCurrentPower KW, KVA, KVArTemperatureHarmonics % ITHD, %VTHD,

stindividual up to 31Energy KWh, KVAh, KVARh

Intelligent controlLarge measurement and input voltage rangeUser friendly operation

stIndividual harmonics up to 31 orderFour quadrant operationsRS 485 communication/real time clock (optional)4 steps variant upgradable to 6 and 8 with additional module.Configurable alarm output for variousparametersRecall recorded values for 10 various important parameters.

Technical Data :l

l

l

l

l

l

Important display parameters :

Features :

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

Steps - 8 and 16 relay outputs Current Input - 1A or 5 A Supply Voltage - 1Ph 415 VAC (-40% to +20% )Measurement Voltage : 3Ph 3 wire 415 VAC (-40% to +20% )Operating temperature : 0 to 70 º C144 x 144 mm front fasciaSupply frequency 50 Hz

Same as per BR 4000ET

for unbalanced loads

setting - useful for utility and DG mode operationAutomatic synchronization possibleSeparate 3 CT monitoring of healthiness of Capacitor within Panel

RS 232 in front and RS 232/485 switchable connection at rearStep operation indication on LCD display plus LED which facilitates viewing from a distanceUnique facility of including 'Fixed Capacitor Bank' for purpose of Transformer compensation. This can be set such that the controller doesn't ‘see' this capacitor.

alarm facility - undervoltage, overvoltage and so on

auxiliary outputs - 2 Nos for Alarm, etc.Dynamic Power Factor Controller (Transistorised) available in16 steps without PT100 facility availableSpecial 8/16 step Controller for Medium Voltage application available

In addition to BR 4000ET

New PF controller with various unique features such as:

With GSM communication facilityProgramming from remote locationTwo way simplex communication viaRS 232 or RS 485Sensitivity - up to 0.8% of sensed currentPF value displayed to third decimalSmoke alarm sensing and messaging.

Three CT sensing

Dual target Power Factor

Data logging

Unique external temperature sensing by PT100Settable

Settable

EMI/EMC type tested.

Technical Data :l

l

l

l

l

l

Important display parameters :

Features :l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

Steps - 6 and 12 outputs (in both relay and transistorised versions)Current Input - 1A or 5 ASupply Voltage - 1Ph - 230 V ACMeasurement Voltage :1Ph 30V - 525V AC (L-N) or (L-L)Operating temperature: -20 to +60º CCompact 144 x 144 mm front fascia

Same as per BR 4000ET

Microcontroller logic for measurementsSelf menu navigation in several languagesSelf optimizing control capabilityControl modes : LIFO, FIFO and Self optimized Intelligent Control.Large and multifunctional LCD with backlit display (2 X 16 characters)Single CT sensing for balanced loads

setting (available in 12 stage) - useful for utility and DG mode operation available optional

Display and storage of maximum values, number of switching operations and operating timeRecall function of recorded valuesRS 232 Interface optionalAlarm output optionalDynamic Power Factor Controller (Transistorised) available in 6 and 12 steps

Protective earth terminal to reduce noise and unwanted interference signals

Individual Harmonic measurement

explanatory

Dual target Power Factor

Automatic synchronization possible

Cascading possible with master slave versions

EMI/ EMC type tested

thupto 19 order.

BR 5100

BR 4000 ER BR 5000 BR 6000

l

16

Power Factor ControllerType Description Material Code MRP

Unit Rs.

Steps Voltage V

Power Factor Controller

Contr - BR6000 6 230 BR6000 SERIES 6STP RELAY 230V B44066R6006R230 14,427

Contr - BR6000 12 230 BR6000 SERIES 12 STP RELAY 230V B44066R6012R230 21,609

Contr - BR6000 12 230 BR6000 SERIES T12 TRANSISTOR O/PRELAY B44066R6112R230 31,227

Contr - BR6000 6 230 BR6000 SERIES T6 TRANSISTOR O/P RELAY B44066R6106R230 20,412

Contr - BR6000 12 230 BR6000 SERIES (RS485 interface) 12 STP RELAY B44066R6412R230 28,823

Contr - BR5000 16 415 PFC CONTROLLER-BR-5000-16 ST-RELAY 415V B44066R5916A415 30,660

Contr - BR5000 8 415 PFC CONTROLLER-BR-5000-08 ST-RELAY 415V B44066R5908A415 21,231

Contr - BR5000 16 415 PFC CONTROLLER BR5000-16ST- TX 415V B44066R5716A415 42,431

Contr - BR4000 4 230 PFC CONTROLLER-BR-4904-04 ST RELAY 230V B44066R4904A230 12,653

Contr - BR4000 8 230 PFC CONTROLLER-BR-4000-08 ST RELAY 230V B44066R4808A230 18,018

Contr - BR5000 5 x 3 240 PFC Controller BR5916S - 1 Ph x 3 - 5 steps per B44066R5916S240 53,172

Contr - BR5000 5 240 BR5100-5STEP-3CT,3PH-4W,415V RELAY B44066R5905R415 15,183

Contr - BR5000 16 415 PFC Controller BR5100 - 16ST 3PH 415V with GSM B44066R5916S415 40,719

Contr - BR5000 6 415 BR5100-6STEP-3CT,3PH-4W,415VAC B44066R5906S415 16,254

Contr - BR5000 8 415 BR5100-8STEP-3CT,3PH-4W,415VAC RELAY O/P B44066R5908R415 18,333

Contr - BR4000-ER 4 240 BR4000-ER SERIES 4 STEP RELAY OUTPUT240V B44066R4004R240 10,206



17

Detuned PFC: Important Facts and Instructions

Important design instructions to be followed for detuned PFC Systems

Determine the necessary effec tivepower (KVAR) of the capacitor bankin order to obtain the desired PF.

Design the capacitor stages in sucha way that the sensibility of the bankis around 15–20% of the total avail-able power. It’s not useful to have amore sensitive bank that reacts witha 5 or 10% of the total power because this would lead to a highamount of switching operations,wasting the equipment unnecessarilywhen the real objective is to havea high average PF.

Try to design the bank with standard KVAR values of effectivepower steps, preferably multiples of 25 KVAR.

Measure the presence of harmoniccurrents in the main feeder cable ofthe system without capacitors at allpossible load conditions. Determinefrequency and maximum amplitudefor every harmonic that could exist.

4

3

2

1

Calcu late the Total Harmonic Distortion of Current THD-I =

Calculate every existing value for

Measure the presence of harmonicvoltages that might come from outside your system, if possible measure the HV side.Calculate the Total Harmonic Distortion of Voltage

Are there harmonics such as

(measured without capacitors)?If YES use PFC-DF and go toconsideration 7.If NO use standard PFC and skipconsiderations 7, 8 and 9.

Is there 3rd harmonic content, ?

If YES use PFC-DF with p = 14%and skip consideration 8.If NO use PFC-DF with p = 7%or 5.67% and go to consideration 8.

7

6

5

THD-V is: 3–7% use PFC-DF with p = 7% >7% use PFC-DF with p = 5.67%>10% ask for special filter design

Select the proper components using EPCOS tables for PFC-DF andstandard values for effective power,the voltage and frequency of yourgrid, and the determined detunedfactor p.

Always use genuine EPCOS application-specific designed components for PFC-DF. Please observe that reactors are specified for their effective power at grid voltage and frequency. This power will be the real effective power of the whole LC set at fundamental frequency. Capacitors for PFC-DF must be selected for a higher rated voltage than the grid’sbecause of the overvoltage causedby the series connection with thereactor. Contactors for capacitors aredesigned as application-specific toreduce inrush capacitors currentsand to handle capacitive loads in areliable way.

9

8

10

1

.100

Capacitor Duty Contactors

Thyristor switching is used when load variation is rapid as in case of cranes, lifts, spot welding, plastic extrusion etc. As there are no moving parts the switching life is very high as compared to contactors. The power electronic devices used have a rated PIV of 2200, one of the highest in its class, thus enhancing the reliability of the module.

Suitable for 10, 25 and 50 KVAr. Rated Voltage 400, 415, 440 and 690 V.

Suitable for real time power factor correction. Easy Installation: It can be used identically as a Contactor.Reaction time: 5 milli seconds.Permanent self- controlling of :

-Voltage Parameter-Capacitor Current-Temperature of the thyristor switch.

Alarm output per module.Manual operation possible.Automatic switch off in case of over current and over temperature.Display of:

-Operations-Faults-Activation.

Range:l

l

Features: l

l

l

l

l

l

l

l

Thyristor Switch Module Three Phase Filter Reactor

This is also known as

Highest linearity,

Safety device - temperature micro switchType tested at CPRI.

anti-resonance three phase filter reactor. Detuned reactors are used with shunt capacitor banks to prevent harmonic resonance and also harmonic overloading of capacitor banks. These reactors are characterized by high linearity, low loss and compact size.

Effective Filter out put 5 KVAr to 100 KVArFiltering factor: - (5.67%,7% and 14% corresponding to tuning frequencies of 210 Hz, 189 Hz and 134 Hz, for fundamental frequency of 50 Hz) Rated Voltage: (230 V to 690 V)Available in three designs1. Aluminum Strip Wound2. Aluminum Foil Wound3. Copper Conductor wound

low risk of reactor tiltingLow losses and noise levelHigh over loading capabilityLow weight in case of aluminum windings

Range :l

l

l

l

Features : l

l

l

l

l

l

Enclosed Capacitor Rack module

Technical Data :l

l

l

l

Features and Benefits :l

l

l

l

l

l

With the growth in power electronic devices the percentage of harmonics in the grid is increased. This has also grown the popularity of detuned harmonic filter within APFC panel. To utilize the existing APFC panels and to replace the plain capacitor with appropriate combination of Reactor - capacitor, EPCOS offers the specially designed Enclosed capacitor Rack module.

Standard Rating - 12.5, 25 , 50 KVArVoltage - 415V / 440V Capacitors - Phase Cap / Phi Cap Reactor - Aluminum / Copper wound

Appropriate selection of Capacitor and detuned harmonic filter reactor ratingEasy installation and maintenance Standardized rating of components Can be used with existing panels and switchgear Natural VentilationBest retrofitting option.

Use of capacitor duty contactor enhance the life of the capacitors also limits the system transients thus improving power quality. Contactors have additional auxiliary contacts with current limiting resistors in series with it.

Technical data according to Standards IEC 947-4-1, IEC 947-5-1, EN 60947-4-1EN 60947-5-1 and VDE 0660

Rating:

Optional Voltage Range (380 V to

Operational ambient temperature up to 60˚ C

Largest range Excellent damping of inrush current by the use of leading contacts with wiper function and special resistorsLonger useful life of main contacts of capacitor Contactor Soft switching of contactor and thus longer useful lifeWeld resistant up to a possible peak inrush current of 200 times the rated capacitor current Enhance mean life expectancy of PFC systemsReduce Ohmic lossesTamper proof and protected resistorsSuitable for use with or detuned reactorsEasy access for cable connection

Specification :l

Range : l

l

l

Features : l

l

l

l

l

l

l

l

l

l

l

l

7 KVAr to 100 KVAr

690 V)

without

Type tested at CPRIAC-6b Utilisation category.

18

Detuned Filter Reactors

The power factor correction or capacitance of the power capacitorforms a resonant circuit in conjunctionwith the feeding transformer. Experienceshows that the self-resonantfrequency of this circuit is typically between 250 and 500 Hz, i.e. in the region of the 5th and 7th harmonics.Such a resonance can leadto the following undesirable effects:- overloading of capacitors,

- overloading of transformers andtransmission equipment,

- interference with metering andcontrol systems, computers and electrical gear,

- resonance elevation, i.e. amplificationof harmonics,

- voltage distortion.These resonance phenomena can be avoided by connecting capacitors in series with filter reactors in the PFC

system. These so called "detuned" PFC systems are scaled in a way that the self-resonant frequency is below the lowest line harmonic. The detuned PFC system is purely inductive seen by harmonics above this frequency. For the base line frequency (50 or 60 Hz usually), the detuned system on the other hand acts purely capacitive, thuscorrecting the reactive power.


19

Capacitor Duty Contactor and TSMType Description Material Code MRP

Unit Rs.

Rating Voltage V

Capacitor Duty Contactor - Standard Series

Capacitor Duty Contactor - Premium Series

Thyristor Switch and Discharge Resistor

Contactor - Standard series 7 240 7KVAR Cap.DutyCont.1NO1NC240V B44066S 711C240 2,079

Contactor - Standard series 10 240 10 KVAR Cap.DutyCont.1NO1NC240V B44066S1011C240 2,331

Contactor - Standard series 12.5 240 12.5 KVAR Cap.DutyCont.1NO1NC240V B44066S1211C240 2,520




Contactor - Standard series 33 240 33 KVAR Cap.DutyCont.1NO 2NC 240V B44066S3312C240 8,285



Contactor - Premium series 12.5 230 Capacitor Contactor 50"C 0-12.5 KVAR B44066S1811J230 4,479

Contactor - Premium series 25 230 Capacitor Contactor 50"C 0-25 KVAR B44066S3211J230 6,237

Contactor - Premium series 33.3 230 Capacitor Contactor 50"C 0-33.3 KVAR B44066S5011J230 9,337




TSM LC 10 10 440 Thyristor Switch Module 10 KVAR, 440V B44066T 10R440 25,156

25 440 Thyristor Switch Module 25 KVAR, 440V 32,716

50 440 Thyristor Switch Module 50 KVAR, 440V 38,707

Ew22-Resistor - 440 Discharge Resistor 22K, 50W, 5% B44066T 22S400 1,229

Output Buffer Card, 24V - 24 Buffer Card B44066R1116R230 8,505

TSM HV 50 50 690 Thyristor Switch Module 50 KVAR, 690V 57,154

EW22-Resistor, 690V - 690 Discharge Resistor 22K, 50W, 5%, 690V 2,419

TSM LCN 25 B44066T 3025R442

TSM LCN 50 B44066T 3050R442

B44066T 50R690

B44066T 22S690

Detuned Filter ReactorType Description Material Code MRP

V (AC) Unit Rs.

Rating Voltage

Three Phase Detuned Filter Reactor (Aluminium Wound)

HFR - AL - 7% DETUNED 5 440 Reactor 7%, 440V/50Hz, 5 KVAR, 173% AL S B44066D7005K440 8,642

HFR - AL - 7% DETUNED 10 440 Reactor 7%, 440V/50 Hz, 10 KVAR, 173% AL B44066D7010K440 11,120

HFR - AL - 7% DETUNED 12.5 440 Reactor 7%, 440V/50 Hz, 12.5 KVAR, 173%, B44066D7012K440 12,306

HFR - AL - 7% DETUNED 15 440 Reactor 7%, 440V/50 Hz, 15 Kvar, 173% AL B44066D7015K440 13,860



HFR - AL - 7% DETUNED 30 440 Reactor7%,440V/50Hz,30KVAR,173%AL-STRIP B44066D7030K440 18,491

HFR - AL - 7% DETUNED 40 440 Reactor 7% 440V/50 Hz, 40 KVAR, 173%, AL B44066D7040K440 24,591


HFR - AL - 7% DETUNED 60 440 Reactor 7%, 440V/50 Hz, 60 KVAR AL 173% B44066D7060E440 33,233

HFR - AL - 7% DETUNED 75 440 Reactor 7% 440V/ 50 Hz, 75 KVAR, AL B44066D7075E440 36,876

HFR - AL - 7% DETUNED 80 440 Reactor7%,440V/50Hz,80KVAR Al173% B44066D7080E440 44,268

HFR - AL - 7% DETUNED 100 440 H.FILTER Reactor 100KVAR , 7%, 440v B44066D7100E440 49,161

HFR - AL - 7% DETUNED 5 415 Reactor 5 KVAR/ 415V, 50Hz 173% AL STRIP B44066D7005K415 9,069

HFR - AL - 7% DETUNED 10 415 Reactor 10 Kvar/ 415V, 50Hz 173% AL STRI B44066D7010K415 11,669

HFR - AL - 7% DETUNED 15 415 Reactor 7%,415V/50Hz,15KVAR,173%AL STRIP B44066D7015K415 14,546

HFR - AL - 7% DETUNED 20 415 Reactor 7% 415V/50Hz, 20 KVAR Al St, 173 B44066D7020K415 15,499

HFR - AL - 7% DETUNED 25 415 Reactor 7%-415V/50Hz,25KVAR,173% ALSTRIP B44066D7025K415 16,154

HFR - AL - 7% DETUNED 30 415 Reactor 7%, 415V/50Hz, 30 KVAR, 173%, AL B44066D7030K415 19,408

HFR - AL - 7% DETUNED 35 415 Reactor 7% 415V/50Hz,35kVAR AL Strip B44066D7035K415 22,643

HFR - AL - 7% DETUNED 50 415 Reactor 7%-415V/50Hz,50KVAR,173% ALSTRIP B44066D7050K415 29,053

HFR - AL - 7% DETUNED 75 415 Reactor 7%-415V/50Hz,75KVAR,173% AL Foil B44066D7075E415 59,296

HFR - AL - 7% DETUNED 100 415 Reactor 7%-415V/50HZ,100KVAR,173% ALFOIL B44066D7100E415 66,150


HFR - AL - 7% DETUNED 10 440 H.FILTER Reactor 10KVAR,7%,440V B44066D7010E440 13,558



HFR - AL - 7% DETUNED 25 440 H.FILTER Reactor 25KVAR , 7%, 440 B44066D7025E440 18,769

HFR - AL - 7% DETUNED 30 440 Reactor 7%, 440V/50 Hz, 30 KVAR AL 173% B44066D7030E440 22,551


HFR - AL - 7% DETUNED 50 440 H.FILTER Reactor 50KVAR,7%,440V B44066D7050E440 33,204

HFR - AL - 14% DETUNED 10 440 H.FILTER Reactor 10KVAR, 14% B44066D1410K440 17,781

HFR - AL - 14% DETUNED 15 440 Reactor 14% -440V / 50Hz, 15KVAR,143% AL B44066D1415K440 22,166

HFR - AL - 14% DETUNED 20 440 Reactor 14%-440V/50Hz,20KVAR,143%AL-Strp B44066D1420K440 24,615

HFR - AL - 14% DETUNED 5 440 Reactor 14% -440V / 50Hz,5KVAR,143% AL B44066D1405E440 16,860

HFR - AL - 14% DETUNED 10 440 Reactor 14% 440V / 50Hz, 10 KVAR, AL B44066D1410E440 21,693

HFR - AL - 14% DETUNED 15 440 Reactor 14% -440V / 50Hz, 15KVAR,143% AL B44066D1415E440 27,042

HFR - AL - 14% DETUNED 25 440 Reactor 14%, 433/440 Volt,50C/s,25 KVAR B44066D1425E440 30,031

HFR - AL - 14% DETUNED 50 440 Reactor 14%, 433/440 Volt,50C/s, 50 KVA B44066D1450E440 53,126

HFR - AL - 14% DETUNED 100 440 Reactor 14%, 433/440 Volt,50C/s,100 KVA B44066D1499E440 97,217

HFR - AL - 5.67% DETUNED 10 440 Reactor 5.67% 440V 50Hz,10KVAR,200%,AL B44066D5010K440 11,335

HFR - AL - 5.67% DETUNED 25 440 Reactor 5.67% - 440V / 50Hz, 25KVAR, 200 B44066D5025K440 15,692

HFR - AL - 5.67% DETUNED 50 440 Reactor 5.67%-440V/50Hz,50KVAR,200% B44066D5050K440 35,279

20

Detuned Filter ReactorType Description Material Code MRP

V (AC) Unit Rs.

Rating Voltage

Three Phase Detuned Filter Reactor (Copper Wound)

HFR - CU - 7% DETUNED 54 40 Reactor 7%-440V/50Hz,5KVAR,173%,CU B44066D7005J440 10,797


HFR - CU - 7% DETUNED 12.5 440 Reactor 12.5 KVAR, 7%, 440V 173% CU B44066D7012J440 15,380

HFR - CU - 7% DETUNED 15 440 Reactor 7%, 440V/50Hz, 15 KVAR CU 173% B44066D7015J440 17,317

HFR - CU - 7% DETUNED 20 440 Reactor 7%, 440V/50 Hz, 20 KVAR, 173% CU B44066D7020J440 18,451

HFR - CU - 7% DETUNED 25 440 Reactor Cu 7%,440V/50Hz, 25 KVAR,173% B44066D7025J440 19,231

HFR - CU - 7% DETUNED 50 440 Reactor 7%- 440V/50Hz, 50 KVAR,173% CU B44066D7050J440 34,587

HFR - CU - 7% DETUNED 100 440 PFC Reactor 7% 440V/50Hz,100 KVAR CU str B44066D7100J440 61,449


HFR - CU - 7% DETUNED 10 415 Reactor 10 KVAR 7%, 415V Copper Wound B44066D7010J415 14,586

HFR - CU - 7% DETUNED 12.5 415 Reactor 12.5 KVAR, 415V, 50Hz, 173% CU B44066D7012J415 15,479

HFR - CU - 7% DETUNED 15 415 Reactor 15 KVAR 7%, 415V Copper Wound B44066D7015J415 18,900

HFR - CU - 7% DETUNED 20 415 Reactor 20 KVAR, 415V, 50Hz, 173% CU B44066D7020J415 19,374

HFR - CU - 7% DETUNED 25 415 Reactor 25 KVAR, 415V, 50HZ , 173% CU B44066D7025J415 20,192

HFR - CU - 7% DETUNED 50 415 Reactor 50 KVAR, 415V, 50Hz, 173% CU B44066D7050J415 36,316

HFR - CU - 7% DETUNED 100 415 Reactor 100 KVAR, 7%, 415V Copper Wound B44066D7100J415 64,521

21

AgriCap CapacitorsRating Description Material Code Voltage IR CN Packing MOQ MRP/


d x h

Agri - Round - 440 V(AC) 3PH, 50HZ (Series B32454)

1 AGRICAP 440V 50HZ-1KVAR 3PH B32454D5001T 10 440 1.31 3 x 5.5 40 x 117 25 25 160



4 AGRICAP 440V 50HZ-4KVAR 3PH B32454D5004T 10 440 5.25 3 x 22.0 63.5 x 117 20 20 639



7 AGRICAP 440V 50HZ-7KVAR 3PH B32454D5007T 10 440 9.19 3 X 38.4 63.5 x 152 16 16 1,078

8 AGRICAP 440V 50HZ-8KVAR 3PH B32454D5008T 10 440 10.5 3 x 44.0 68 x 153 16 16 1,232

10 AgriCap 440V 50Hz-10KVAR 3PH B32454D5010T 10 440 13.1 3 x 55 68 x 203 16 16 1,540

12.5 AgriCap 440V 50Hz-12.5KVAR 3PH B32454D5012T510 440 3 x 68.5 78.4 x 195 16 16 1,927

15 AgriCap 440V 50Hz-15KVAR 3PH B32454D5015T 10 440 19.7 3 x 82.2 68.4 x 195 16 16 2,313

16.4

Q =P x F(0.96)=...(KVAr)c mot

100 x 1.01=101.0 KVArQc

Example:ACTUAL motor power P = 100 kWActual cos j 0.61TARGET cos j 0.96Factor F from table 1.01

Capacitor (KVAr) selection chart

3.18 0.30 2.43 2.48 2.56 2.64 2.70 2.75 2.82 2.89 2.98 3.18

2.96 0.32 2.21 2.26 2.34 2.42 2.48 2.53 2.60 2.67 2.76 2.96

2.77 0.34 2.02 2.07 2.15 2.23 2.28 2.34 2.41 2.48 2.56 2.77

2.59 0.36 1.84 1.89 1.97 2.05 2.10 2.17 2.23 2.30 2.39 2.59

2.43 0.38 1.68 1.73 1.81 1.89 1.95 2.01 2.07 2.14 2.23 2.43

2.29 0.40 1.54 1.59 1.67 1.75 1.81 1.87 1.93 2.00 2.09 2.29

2.16 0.42 1.41 1.46 1.54 1.62 1.68 1.73 1.80 1.87 1.96 2.16

2.04 0.44 1.29 1.34 1.42 1.50 1.56 1.61 1.68 1.75 1.84 2.04

1.93 0.46 1.18 1.23 1.31 1.39 1.45 1.50 1.57 1.64 1.73 1.93

1.83 0.48 1.08 1.13 1.21 1.29 1.34 1.40 1.47 1.54 1.62 1.83

1.73 0.50 0.98 1.03 1.11 1.19 1.25 1.31 1.37 1.45 1.63 1.73

1.64 0.52 0.89 0.94 1.02 1.10 1.16 1.22 1.28 1.35 1.44 1.64

1.56 0.54 0.81 0.86 0.94 1.02 1.07 1.13 1.20 1.27 1.36 1.56

1.48 0.56 0.73 0.78 0.86 0.94 1.00 1.05 1.12 1.19 1.28 1.48

1.40 0.58 0.65 0.70 0.78 0.86 0.92 0.98 1.04 1.11 1.20 1.40

1.33 0.60 0.58 0.63 0.71 0.79 0.85 0.91 0.97 1.04 1.13 1.33

1.30 0.61 0.55 0.60 0.68 0.76 0.81 0.87 0.94 1.01 1.10 1.30

1.27 0.62 0.52 0.57 0.65 0.73 0.78 0.84 0.91 0.99 1.06 1.27

1.23 0.63 0.48 0.53 0.61 0.69 0.75 0.81 0.87 0.94 1.03 1.23

1.20 0.64 0.45 0.50 0.58 0.66 0.72 0.77 0.84 0.91 1.00 1.20

1.17 0.65 0.42 0.47 0.55 0.63 0.68 0.74 0.81 0.88 0.97 1.17

1.14 0.66 0.39 0.44 0.52 0.60 0.65 0.71 0.78 0.85 0.94 1.14

1.11 0.67 0.36 0.41 0.49 0.57 0.63 0.68 0.75 0.82 0.90 1.11

1.08 0.68 0.33 0.38 0.46 0.54 0.59 0.65 0.72 0.79 0.88 1.08

1.05 0.69 0.30 0.35 0.43 0.51 0.56 0.62 0.69 0.76 0.85 1.05

1.02 0.70 0.27 0.32 0.40 0.48 0.54 0.59 0.66 0.73 0.82 1.02

0.99 0.71 0.24 0.29 0.37 0.45 0.51 0.57 0.63 0.70 0.79 0.99

0.96 0.72 0.21 0.26 0.34 0.42 0.48 0.54 0.60 0.67 0.76 0.96

0.94 0.73 0.19 0.24 0.32 0.40 0.45 0.51 0.58 0.65 0.73 0.94

0.91 0.74 0.16 0.21 0.29 0.37 0.42 0.48 0.55 0.62 0.71 0.91

0.88 0.75 0.13 0.18 0.26 0.34 0.40 0.46 0.52 0.59 0.68 0.88

0.86 0.76 0.11 0.16 0.24 0.32 0.37 0.43 0.50 0.57 0.65 0.86

0.83 0.77 0.08 0.13 0.21 0.29 0.34 0.40 0.47 0.54 0.63 0.83

0.80 0.78 0.05 0.10 0.18 0.26 0.32 0.38 0.44 0.51 0.60 0.80

0.78 0.79 0.03 0.08 0.16 0.24 0.29 0.35 0.42 0.49 0.57 0.78

0.75 0.80 0.05 0.13 0.21 0.27 0.32 0.39 0.46 0.55 0.75

0.72 0.81 0.10 0.18 0.24 0.30 0.36 0.43 0.52 0.72

0.70 0.82 0.08 0.16 0.21 0.27 0.34 0.41 0.49 0.70

0.67 0.83 0.05 0.13 0.19 0.25 0.31 0.38 0.47 0.67

0.65 0.84 0.03 0.11 0.16 0.22 0.29 0.36 0.44 0.65

0.62 0.85 0.08 0.14 0.19 0.26 0.33 0.42 0.62

0.59 0.86 0.05 0.11 0.17 0.23 0.30 0.39 0.59

0.57 0.87 0.08 0.14 0.21 0.28 0.36 0.57

0.54 0.88 0.06 0.11 0.18 0.25 0.34 0.54

0.51 0.89 0.03 0.09 0.15 0.22 0.31 0.51

0.48 0.90 0.06 0.12 0.19 0.26 0.48

0.46 0.91 0.03 0.10 0.17 0.25 0.46

0.43 0.92 0.07 0.14 0.22 0.43

0.40 0.93 0.04 0.11 0.19 0.40

0.36 0.94 0.07 0.16 0.36

00..33 95 0.13 0.33

TARGET QjCos = 0.96

Current achievable

(ACTUAL) (TARGET)

Tan j cos j cos j

0.80 0.82 0.85 0.88 0.90 0.92 0.94 0.96 0.98 1.00

Factor F

Qc = PA x (tan j1-tan j2)Qc (kvar) = PA x F = active power (kW) x factor “F” PA=S x cos j = apparent power x cos jtan j1 + j2 according to cos j values ref. Table

Capacitor reactive power QcQc = 100 x 1.01 = 101.0 KVAr

<_Cos j 1

22

Please visit our website www.epcos.com for more information on ‘Applications, warnings, installation and maintenance instructions'

23

Authorized Dealer

“Product development is a continuous process. Consequently the data indicated in this price list is subject to change without prior notice. For the latest information, contact your local partners.”

For more details on products and applications

please contact our nearest sales office or write to us at

[email protected]

Important information: Some parts of this publication contain statements about the suitability to our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products. We expressly point out that these statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. It is incumbent on the customer to check and decide whether the product is suitable for use in a particular application. This publication is only a brief product survey which may be changed from time to time. Our products are described in detail in our data sheets. The Important Notes (www.epcos.com/lmportantNotes) and the product-specific warnings and cautions must be observed. All relevant information is available through our sales offices.

Note:1. This price list supercedes all previous price lists.2. The prices are subject to change without notice.3. Part numbers listed are for internal purpose and are subject to change.4. Product improvement is a continuous process. For the latest information and special applications please contact any of our sales offices.

Warranty:1. Products manufactured by us are warranted against defects arising out of manufacturing processes or use of defective raw material, for a period of 18 months from the date of our supply or 12 months from the date of installation whichever is earlier. The company reserves the right to either replace or to repair the defective items after ascertaining facts through a detailed service report on appropriate usage of our products in rated conditions. The company reserves the right to take back the defective goods for carrying out study or inspection.2. Warranty is not applicable if the products are found tampered with or subjected to calibration changes. The company's liability is limited to repair or replace the defective product only. The manufacturer shall not be liable for any consequential loss, injury or damages attributable to defect or failure of it's products.3. Proof of purchase to be retained to avail warranty.4. Any dispute arising in this regard shall be subjected to jurisdiction of courts in Nashik, in the state of Maharashtra - India.

Regional Sales Offices:

Kolkata Tel: +91-33-2419 8815. Fax: +91-33-2419 8815

Mumbai Tel: +91-22-2575 0800. Fax: +91-22-2575 0810

Noida Tel: +91-120-450 5801. Fax: +91-120-450 5818

Bengaluru Tel: +91-80-4039 0600. Fax: +91-80-4039 0603

EPCOS India Pvt. Ltd.A TDK Group CompanySales Head Office:#87,The CENTURM, 4th Floor, Infinity Road, Bengaluru 560 001. Tel: +91-80-4039 0600. Fax :+91-80-4039 0603.Email: [email protected] list with effect from 1st April 2018

EIPL- PFC PRICE LIST 042018 R5

pfc price list april 18 single page · wavecut technology for mpp film with heavy edge self healing...

Documents