conveyor products catalogue - dotmar.co.nz components cws wear strips 31 ... lower load and lower...

EDITION 2

C O N V E Y O R P R O D U C T SCATALOGUE

Issued January 2016Subject to change without notice.

EDITION 2

2 Conveyor Products Catalogue

STRUCTURAL

DOTMAR POLYCARBONATE (MACHINE GUARDS PANEL) 61 CHANGE PARTS BOTTLING AND PACKAGING 69 DIGITAL MEASURING SERVICE 70

BEARINGS

CBH BEARINGS IN PLASTIC HOUSINGS 2 BOLT 71 - 72CBH BEARINGS IN PLASTIC HOUSINGS 3 BOLT 72 CBH BEARINGS IN PLASTIC HOUSINGS 4 BOLT 73CBH BEARINGS IN PLASTIC HOUSINGS + PILLOW BLOCK 74CBH BEARINGS PLASTIC SAFETY CAP 75

PRODUCTS

FOOD INDUSTRY APPLICATIONS 76 METAL DETECTABLE PLASTIC 77

CHEMFAB

CHEMSTIK 78

BELT

EUROBELT 79

SYSTEM PLAST TECHNICAL

SELECTION CHECK LIST 80 - 84 TECHNICAL INFORMATION 85 CALCULATION DATA SHEET 86 TROUBLE SHOOTING 87

FLAT TOP CHAIN

CHAIN MATERIALS 3 CONVEYOR DIAGRAM 4FST STEEL CHAIN STRAIGHT 5FST STEEL CHAIN SIDE FLEX 5FLF/FNG PLASTIC CHAIN STRAIGHT 6 - 7FLF/FNG PLASTIC CHAIN SIDE FLEX 7 - 9FVG GRIP TOP CHAIN 10 - 11FLB LOW BACK PRESSURE CHAIN 12FGC GRIPPER CHAIN 13FCA CARRIER CHAIN 14 - 16SSR SPROCKET STRAIGHT RUN CHAIN 17 - 19SSF SPROCKET SIDE FLEX CHAIN 19 - 21SOT SPROCKET OTHER 21 - 22

BELT

FBE MODULAR BELTS 23 - 27 2253 RT MULTIDIRECTIONAL ROLLER TOP 28 - 30

CONVEYOR COMPONENTS

CWS WEAR STRIPS 31 - 37CRC CHAIN RETURN COMPONENTS 38 - 40CMT MACHINED TRACK FOR TAB & MAGNETIC 40 - 42CSG SIDE GUIDE COMPONENTS 43 - 51CRG ROLLER GUIDES 52 - 55CCC CONNECTING CLAMPS 55 - 56CSC FRAME STRUCTURAL COMPONENTS 56 - 60CFS FRAME SUPPORT COMPONENTS 62 - 66CAF ARTICULATED FEET 67 - 68

DOTMAR CONVEYOR PRODUCTS - CONTENTS

Conveyor Products Catalogue 3 Conveyor Products Catalogue 3

*Denotes standard materials

CHAIN METAL MATERIAL

STANDARD STAINLESS STEELAISI 430 stainless steel material with good mechanical characteristics and dust resistance. An economical option for many conveying applications. Lower load and lower wear resistance capability than our other stainless steel materials. Features: • Rust resistant stainless steel Benefits: • Most economic solution

EXTRA PLUS STAINLESS STEELHigh performance stainless steel, specially developed for high speed and heavy duty applications. Offers excellent corrosion resistance and highest surface hardness. Features: • Surface hardness of HRC 26-30 for Extra Plus • Extremely flat and best surface finish • High corrosion and wear resistance • Highest ultimate yield loading capability Benefits: • Typically used in glide liners and pressureless combiners and excessively long conveyors • For the improvement of product stability especially for P.E.T.

AUSTENITIC STAINLESS STEELAISI 304 Austenitic stainless steel which offers exceptionally high corrosion and acid resistance properties. Features: • Non magnetic stainless steel • 18% chrome and 8% nickel Benefits: • High corrosion and acid resistance material

PIN METAL MATERIAL

STANDARD PIN MATERIALSpecial Austenitic stainless steel with higher tensile strength and improved surface hardness. These pins are offered as standard in stainless steel and plastic chains. Features: • High wear, corrosion and acid resistance Benefits: • Long wear life

SPECIAL PIN MATERIALVacuum hardened stainless steel with exceptionally high wear resistance characteristics, good corrosion and chemical resistance, for high speed and or abrasive applications. Benefits: • Ultimate abrasion resistance • Outstanding wear life

STD

*SSE

SSA

STANDARD CHAIN PLASTIC MATERIALS

ACETAL RESINIt is an acetal based material which is used as an economical alternative to our LF acetal material. Acetal is an ideal material for conveyor chains as it offers high tensile + fatigue strengths, good co-efficient of friction and excellent wear resistance properties. Operating Temperatures: In air: - 40˚C to + 80˚C, In hot water: + 65˚C Colour: Grey or White This material is FDA (Food and Drug Administration) approved for direct contact with food.

LOW FRICTION ACETAL RESINIt is identical to the delrin acetal material and offers an improved co-efficient of friction. This material is suitable for use in high speed applications. Operating Temperatures: Dry: - 40˚C to + 80˚ Wet: 0˚C to 65˚C Colour: Light Brown, Dark Grey or White This material is FDA (Food and Drug Administration) approved for direct contact with food.

NEW GENERATION - EVOLUTIONExtra performance PBT with lowest co-efficient of friction, resulting in medium strength, optimum wear resistance and reduced plate wear reduced pitch elongation. Suitable for high speed and dry running applications available exclusively from System Plast. Operating Temperatures: Dry: - 40˚C to 120˚C Wet: - 40˚C to 60˚C Colour: NGE = Dark Grey Blue

SPECIAL CHAIN PLASTIC MATERIALSOn request and for adequate quantities these chains may be produced in other materials as:

ANTI-STATIC ACETAL RESINAnti-static material with improved surface conductivity for greater protection against static electrical charges. Operating Temperatures: In air: - 40˚C to + 80˚C In hot water: + 65˚C Colour: Black

HIGH TEMPERATURE RESISTANCEHigh temperature material for applications up to 120˚C. Special materials are also available for temperatures up to 200˚C.

D

*LF

*NG Evo

SPM

HB

AS

HT

*SSEL

SYSTEM PLAST FLAT TOP CHAINS

4 Conveyor Products Catalogue 4 Conveyor Products Catalogue

SYSTEM PLAST PRODUCT RANGE

Dotmar’s Conveyor Products is a range of leading conveyor components, plastic modules, plastic conveyor chain and integrated conveyor solutions from concept to completion. This range includes flat top chain, the accompanying plastic chain track, modular plastic conveyor belts, components such as guide rails, conveyor feet, brackets etc. Networking with our business partners and customers we provide solutions utilising the latest generation of System Plast innovations across a wide range of industries and applications.

The combination of Dotmar and System Plast expertise presents a formidable package of integrated skills, extending from the design, specification and fabrication of materials handling systems, through to the delivery of complete systems involved in containment, conveying and lifting and loading in internal transfer systems.

For full System Plast online catalogue go to: www.systemplastsmartguide.com


FST Steel Chain Straight

Code Smart Guide Description Max. Working Load Finish Flatness

(max) Polished Hinges

L Width G RD Weight

N um mm mm inch mm mm Kg/m FST10009 SSEL815-K325 SSEL 815 K325 STRAIGHT RUNNING CHAIN 6000 0.3 0.1 No 82.5 3 1/4 1.8 150 2.60

FST Steel Chain Straight



L Width G RD Weight

N um mm mm inch mm mm Kg/m FST10096L SPSL815-K330HB SPSL 815 K330HB SPEEDLINE CHAIN 6000 0.2 0.1 Yes 83.8 3 19 / 64 1.5 150 2.60

FST Chain Side Flex



L Width R SC Weight

N um mm mm inch min mm Kg/m FST10214 SSE881MO-K330HB SSE 881 MO K330HB MAGNETIC CHAIN 6000 0.3 0.15 Yes 83.8 3 19 / 64 500 45 2.7


L

G

Ø 6.3538.1

6.6

RD

9.8

3.1

42.1

44

TRAVEL

L

G

Ø 6.3538.1

6.6

RD

9.8

3.1

42.1

44

TRAVEL

Advantages:• The best choice for the most demanding applications, like pressureless combinations• Improved flatness• Optimum product stability

Advantages:• All advantages of the magnetic system• The best choice for the most demanding applications, like pressureless combiners and high speed applications• Improved flatness• Optimum product stability

38.1 Ø 6.35

6.6

9.8

TRAVEL

R.

3.1

42.1

SC RD=80

13.5

27

L

Standard Length = 10ft or 3.048mts



Page 17

Page 17

Page 17


FLF/FNG Plastic Chain Straight - 820

Code Smart Guide Description Breaking Load

L Width Weight

N mm inch Kg/m FLF11362 LF820-K325 LF 820 K325 STRAIGHT RUNNING CHAIN 5000 82.5 3 1/4 0.90 FLF11368 LF820-K450 LF 820 K450 STRAIGHT RUNNING CHAIN 5000 114.3 4 1/2 1.00 FLF11371 LF820-K600 LF 820 K600 STRAIGHT RUNNING CHAIN 5000 152.4 6 1.30 FLF11374 LF820-K750 LF 820 K750 STRAIGHT RUNNING CHAIN 5000 190.5 7 1/2 1.50 FNG11151EVO NGE820-K325 NGE 820 K325 STRAIGHT RUNNING CHAIN 4500 82.5 3 1/2 0.90 FNG11154EVO NGE820-K450 NGE 820 K450 STRAIGHT RUNNING CHAIN 4500 114.3 4 ½ 1.00 FNG11156EVO NGE820-K750 NGE 820 K750 STRAIGHT RUNNING CHAIN 4500 190.5 7 1/2 1.50

FNG Plastic Chain Straight - 828


L Width Weight

N mm inch Kg/m FNG111135EVO NGE828-K330 NGE 828 K330 STRAIGHT RUNNING CHAIN 4500 83.8 3 19/32 1.20

Ø 7

.14

7.6

11.2

TRAVEL

38.1RD=50

42.1

4

L

FNG Plastic Chain Straight - 831


L Width Weight

N mm inch Kg/m FNG11160EVO NGE831-K325 NGE 831 K325 STRAIGHT RUNNING CHAIN 4500 82.5 3 1/4 1.00


4

44.5 9.5

13.5

7.2

Ø 6.35

42.1

TRAVEL

RD=5038.1

L

8.7

13.5

7.2

Ø 6.35

4.8

44.5

42.1

TRAVEL

38.1RD=50

L

Note:The 831 series has a thicker top plate (4.8mm) giving much more wear life. It also simplifies conveyor design when matching chains from the series 821 – 879 – 882 – 8257 – 882 M.

Standard Length = 10ft or 3.048mts Colour: LF-Brown NGE-Dark Grey Blue

Standard Length = 10ft or 3.048mts Colour: NGE-Dark Grey Blue

Standard Length = 10ft or 3.048mts Colour: NGE-Dark Grey Blue

Page 18

Page 18

Features:• Standardization• Identical sprockets as side flexing chains• Standard conveyor construction• High load capacity• Particularly suitable for accumulation tables as well as for pressure-less combiners• Improved product stability• Reduced gap between adjacent tracks• Better top plate flatness in the hinge area

Pin material:Austenitic Steel


FLF/FNG Plastic Chain Side Flex - 880TAB


L Width

B Thickness

R min. SC Weight

N mm inch mm mm mm Kg/m FLF11377 LF880TAB-K325 LF 880 TAB K325 SIDE FLEX CHAIN 6000 82.5 3 1/4 4 500 45 0.94 FLF11380 LF880TAB-K450 LF 880 TAB K450 SIDE FLEX CHAIN 6000 114.3 4 1/2 4 500 45 1.08 FNG11195EVO NGE880TAB-K325 NGE 880 TAB K325 SIDE FLEX CHAIN 5400 82.5 3 1/4 4 500 45 0.94

FLF/FNG Plastic Chain Straight - 821


L Width Weight

N mm inch Kg/m FLF11002 LF821-K750 LF 821 K750 STRAIGHT RUNNING CHAIN 8300 190.5 7 1/2 2.59 FLF11004 LF821-K1000 LF 821 K1000 STRAIGHT RUNNING CHAIN 8300 254 10 3.08 FLF11006 LF821-K1200 LF 821 K1200 STRAIGHT RUNNING CHAIN 8300 304.8 12 3.35 FNG11170EVO NGE821-K750 NGE 821 K750 STRAIGHT RUNNING CHAIN 7500 190.5 7 1/2 2.59


7.55

Ø 7

.14

R.

SC

42.1

16

61

11.5

B

TRAVEL

38.1

RD=50

L

140

4.8

9.5

38.1

8

Ø 6.35

14.3

TRAVEL

RD=50

136.5

L

Note: These chains have a double hinge and double reinforcing bars for a high strength.

Note:The 879 TAB series has a thicker top plate (4.8mm) giving much more wear life. It also simplifies conveyor design when matching chains from the series 821 – 831 – 879 – 882.



Page 19

Page 19, 20

Available on Request

FNG Plastic Chain Side Flex - 879TAB


L Width

B Thickness

R min. SC Weight

N mm inch mm mm mm Kg/m FNG11198EVO NGE879TAB-K325 NGE 879 TAB K325 SIDE FLEX CHAIN 5400 82.5 3 1/2 4.8 500 45 1.00 Available on

Request




L Width

R min. SC Weight

N mm inch mm mm Kg/m FLF11390 LF878TAB-K325 LF 878 TAB K325 SIDE FLEX CHAIN 5100 82.5 3 1/4 190 45 1.10

FLF Plastic Chain Side Flex - 880 MAGNETIC


L Width

B Thickness

R min. SC Weight

N mm inch mm mm mm Kg/m FLF11377M LF880M-K325 LF 880 M K325 MAG SIDE FLEX CHAIN 5700 82.5 3 1/4 4 500 45 1.10 FNG11224MEVO NGE880M-K330 NGE 880 M K330 MAG SIDE FLEX CHAIN 5100 83.8 3 19/64 4 500 45 1.10


8.3

7.05

SC

42.1

61.8

11.8

4.8

20.8

R.

TRAVEL

38.1RD=50

L

Ø 7

.14

7.55

R.

11.1

TRAVEL

38.1RD=50

B

SC

42.1

13.5

27

LNote:The 879M series has a thicker top plate (4.8mm) giving much more wear life. It also simplifies conveyor design when matching chains from the series 821 – 831 – 879 – 879 TAB – 882 – 882 M – 8257.

Advantages:• One conveyor construction• Easy to clean• Easy maintenance• Improved wear life• Hygienic concept

Pin material: Ferritic Stainless Steel

Advantages:• Small side flexing radius R=190mm• Tangential engagement• Specially shaped flights to improve the contact between the product and chain• Small gap between flights to improve product stability• Bidirectional

Pin material:Austenitic Steel

Characteristics:Plastic Magnetic System chains do not have TAB or BEVAL shoes. The ferritic stainless steel pins are securely retained in position by the magnets located in the upper section of the curve. These chains can be easily removed from the curve for maintenance or cleaning, without dismantling the chain.

Characteristics:The new 879 TAB series enables the designer and the manufacturer of side flexing conveyors to reduce the radius of the curves. This chain is suitable for solving conveying problems in confined spaces. Can also be used where products are conveyed on an incline or decline and accumulation may occur. The characteristics of this chain make this product unique in its design.


Standard Length = 10ft or 3.048mts Colour: LF-Brown

Page 19, 20

Page 19, 20




L Width

R min. SC Weight

N mm inch mm mm Kg/m FLF11041 LF882TAB-K750 LF 882 TAB K750 SIDE FLEX CHAIN 10000 190.5 7 1/2 610 58 2.50 FLF11042 LF882TAB-K1000 LF 882 TAB K1000 SIDE FLEX CHAIN 10000 254 10 610 58 2.90 FLF11043 LF882TAB-K1200 LF 882 TAB K1200 SIDE FLEX CHAIN 10000 304.8 12 610 58 3.40 FNG11484EVO NGE882TAB-K750 NGE 882 TAB K750 SIDE FLEX CHAIN 9000 190.5 7 1/2 610 58 2.50 FNG11485EVO NGE882TAB-K1000 NGE 882 TAB K1000 SIDE FLEX CHAIN 9000 254 10 610 58 2.90 FNG11486EVO NGE882TAB-K1200 NGE 882 TAB K1200 SIDE FLEX CHAIN 9000 304.8 12 610 58 3.40


8.73

9.5

SC

17.2

56.6

76

4.8

22.2

R.

27

TRAVEL

38.1RD=50

L

Characteristics:The 882 TAB type has a larger pin size hinge geometry and because of a well balanced distribution of the material it has an excellent carrying load capacity.

The standard widths are produced up to 304.8mm (12”) making it compatible with the 821 series and offering the largest conveying area in the flat top chain products.

Advantages: Heavy Duty

Pin material: Austenitic Steel


Page 20, 21

•Run dry solution

•Longer life

•Good chemical resistance

•High abrasion resistance

•Approved for direct food contact

•Less dust than with acetal chains


FVG Grip Top Chains Straight - 821


L Width

WR Width Weight

N mm inch mm inch Kg/m FVG11035 NGE821-K1200VG NGE 821 K1200 VG CHAIN 7000 304.8 12 252 12 3.80

FVG Grip Top Chains Straight - 831


L Width

WR Width Weight

N mm inch mm inch Kg/m FVG11221 NGE831-K325VG NGE 831 K325 VG CHAIN 3600 82.5 3 1/4 60 2.36 1.40


4.8

44

3

7.8

8.7

16.5

7.2

Ø 6.35

42.1

15

WR

TRAVEL

RD=5038.1

L

Standard Length = 10ft or 3.048mts Colour: Link NGE - Dark Grey Blue Rubber - Water Blue

Characteristics:For 831 VG K325 chains a roller return track is required as the friction pad extends across the full width of the plate.


9.5

38.1

7.95

17.3

Ø 6.35

3

140

4.8

1

7.8

19WR

136.

5

19

TRAVEL

RD=50

L


Characteristics:The return section of the conveyor can be constructed using standard wearstrips or return rollers to support the chain on its return.

Advantages: Heavy Duty


Page 18

Page 19


FVG Grip Top Chains Side Flex – 882 TABVG


L Width

WR Width

R min. SC Weight

mm inch mm inch mm mm Kg/m FVG11093 NGE882TAB-K1200VG NGE 882 TAB K1200VG SIDE FLEX GRIP TOP CHAIN 9000 304.8 12 134 5 5/16 610 60 2.90


SC

17

57.2

76.2

4.8

22.2

1

R.

WR

23

16

TRAVEL

8.73 9.5

30

38.1

RD=50

3

L

RD=50

4.8

SC

42.1

16

61

11.5

TRAVEL

15

60

R.

38.1

7.55

Ø 7

.14

3L


Advantages:• High breaking load• This chain is particularly suitable where heavier and larger products are conveyed





FVG Grip Top Chains Side Flex - 879TABVG


L Width

R min. SC Weight

N mm inch mm mm Kg/m FVG11242 NGE879TAB-K325VG NGE 879 TAB K325VG SIDE FLEX GRIP TOP CHAIN 4700 82.5 3 1/4 500 45 1.2

Page 19, 20

Page 20, 21


FLB Low Back Pressure Chain Straight – LBP 8257


L Width Weight

N mm inch Kg/m FLB11076 LFG8257LBP-K750 LBP 8257 K750 STRAIGHT RUNNING CHAIN 10000 190.5 7 1/2 5.65 FLB11078 LFG8257LBP-K1200 LBP 8257 K1200 STRAIGHT RUNNING CHAIN 10000 304.8 12 8.10

FLB Low Back Pressure Chain Side Flex - LBP 882TAB


L Width

R min. SC Weight

N mm inch mm mm Kg/m FLB11075 LFG882LBP-M-K1200 LBP 882M K1200 SIDE FLEX CHAIN 10000 304.8 12 610 60 5.85


TRAVEL

5760

4.8

14.2

33.5

38.1

9.5

Ø 8

RD=400

Ø 1

0.9

19.3

L

57SC

4.8

14.2

33.5

38.1

9.5

Ø 8

RD=400

Ø 9

.5

19.3

L = 304.8

R.

TRAVEL

Advantages:• High breaking load• Rollers manufactured in low friction and low noise material - reduced back-line pressure and low noise level• Same sprocket as 882 Series chains


Standard Length = 5ft or 1.52mts Colour: Link NGE - Dark Grey Blue Roller - Water Blue

Standard Length = 5ft or 1.52mts Colour: Link NGE - Dark Grey Blue Roller - Water Blue

Page 20, 21

Page 20, 21

Note: 821 Series - Double hinge available on request

Advantages:• High breaking load• Rollers manufactured in Low Friction and low noise material - reduced back-line pressure and quiet running• A pin roller support has been added to maintain a flat and consistent carrying surface (10” - 12” width only)• Same hinge width available in many chain types, both steel and plastic, also Flat Top and rubber top chains

Note: Plastic magnetic chains do not have tabs or bevels, it is the Stainless Steel pin in the chain which is attracted by the magnets embedded in the curve.

Pin material: Ferritic Stainless Steel


TRAVEL

35

K

TRAVEL

41

K


Standard Length = 10ft or 3.048mts Colour: Link LFG - Dark Grey Rubber - Water Blue


41

K

TRAVEL


GS1

GS1

GS2

FGC Gripper Chain Side Flex 878TAB GS1

Code Smart Guide Description Rubber Breaking Load K H R

Min Material Weight

Pn N mm mm mm Plate Gripper Kg/m FGC11407 LFG878TAB-K325GS1 LFG 878 TAB K325 GS1 GRIPPER CHAIN FGC11740 6000 82 41 200 LFG TPR 4.70

FGC Gripper Chain Side Flex - 878TAB GS2

Code Smart Guide Description Rubber Breaking Load K H R

Min Material Weight

Pn N mm Mm Mm Plate Gripper Kg/m FGC11408 LFG878TAB-K325GS2 LFG 878 TAB K325 GS2 GRIPPER CHAIN 11742 6000 82 35 200 LFG TPR 4.05

FGC Gripper Chain Side Flex - 1873 GS1

Code Smart Guide Description Rubber K H R Min Material Weight

Pn mm mm mm Roller Chain Plate Gripper Kg/m FGC11763 LFG1873SS-TAB-K325GS1 LFG1873SSK325 GS1 GRIPPER CHAIN 11740 82 41 380 AUSTIC LFG TPR 4.65

FGC Gripper Chain Side Flex - 1873 GS1 - Parts

Code Smart Guide Description Kit - Flight Rubber Pin K Material

mm Roller Chain Plate Gripper FGC11730 GRPK-LFG-K325-GS1-NBR GS1-82 K325 GRIPPER SNAP ON KIT 11730 82 AUSTIC SS LFG (grey) Thermoplastic FGC11740 GRP-K325-GS1-NBR GS1 K325 RUBBER ONLY - 82 - - Thermoplastic FGC11742CR GRP-K325-GS2-EPDMPP GS2 K325 RUBBER ONLY - 82 - - Thermoplastic FTP211041 - 863-1873 SS BASE CHAIN - - FERRITIC SS - - FTP211116 - 863-1873 SS CONNECTING LINK - - FERRITIC SS - -

Page 19, 20

Page 19, 20




14.5

Ø 11

63.5LK

K

28.5

TRAVEL

42

R.

L

Notes:Machined corner tracks made to order.

CC600 available in mall iron. In Plain and Tab version.

Split machined sprockets available on request.

14.5

Ø 11

63.5

28.5

TRAVEL

42

R.

L

CC600

CC600F

CC600TAB

FCA Carrier Chain Side Flex - CC600 - CC600TAB – CC600F

Code Smart Guide Description Material Radius L K LK Breaking Load Weight

Link Pin m mm mm mm N Kg/m FCA11007 LFW600 CC600 STD CRATE CHAIN W ACETAL SS 700 90 - - 14000 1.30 FCA11009 LFW600TAB CC600 TAB CRATE CHAIN W ACETAL SS 700 90 17 54 14000 1.50 FCA11036 LFW600F CC600 F CRATE CHAIN W ACETAL SS 700 90 - - 14000 1.40

Page 21



CC600 available in mall iron. In Plain and Tab version.



Turning discs moulded or machined available or request.


14.5

Ø 11

63.5

4228

.5

TRAVEL90

3.5

R.

9014

.5

Ø 11

63.5

42

54

17

28.5

TRAVEL

3.5

R.


58

50Ø 8

25

53.5

R.

38

TRAVEL


FCA Carrier Chain Side Flex - CC600P - CC600TABP

Code Smart Guide Description Material R min. Breaking Load Weight

Link Pin mm N Kg/m FCA11045 LFW600P CC600 P CLOSED CRATE CHAIN W ACETAL SS 700 14000 1.40 FCA11046 LFW600P-TAB CC600 P CLOSED TAB CRATE CHAIN W ACETAL SS 700 14000 1.55

FCA Carrier Chain Multiflex - 1702 Code Smart Guide Description Material R min. Breaking Load Weight

Plate Pin mm N Kg/m FCA11955 LFW1702 LFW1702 MULTIFLEX CHAIN W ACETAL SS 150 9500 1.40 FCA11984EVO NGE1702 NGE1702 MULTIFLEX CHAIN DG BLUE PBT SS 150 8600 1.40

Page 21

Page 22



50Ø 8

25

55

R.

36

58

66

6


FCA Carrier Chain Multiflex - 1701TAB OP Code Smart Guide Description Material R min. Breaking Load Weight

Plate Pin mm N Kg/m FCA11959 - LF1701 TAB OP MULTIFLEX CHAIN W ACETAL SS 150 9500 1.40

Page 22


Turning discs moulded or machined available or request.

Application: System Plast Multi-flex chain with beverage cartons.


SSR Sprocket Chain - 815 - 881MO (Machined)

Code Smart Guide Description C mm

H mm

S mm

SSR12906 815-21R18M-RMS 815-21T SPLIT MACH SPKT 18MM BORE 129 129.26 67.80 SSR12907 815-23R18M-RMS 815-23T SPLIT MACH SPKT 18MM BORE 142 141.21 73.80 SSR12908 815-25R18M-RMS 815-25T SPLIT MACH SPKT 18MM BORE 154 153.21 79.8

SSR Sprocket Chain - 815 - 881MO (Moulded)

Code Smart Guide Description B mm

C mm

S mm

SSR12053 815-21R25M-DS 815-21T SPLIT SPKT 25MM B&K 116.1 129 68.80 SSR12054 815-21R30M-DS 815-21T SPLIT SPKT 30MM B&K 116.1 129 68.80 SSR12065 815-25R25M-DS 815-25T SPLIT SPKT 25MM B&K 140.1 154 79.8 SSR12066 815-25R30M-DS 815-25T SPLIT SPKT 30MM B&K 140.1 154 79.8 SSR12099 815-23R25M-DS 815-23T SPLIT SPKT 25MM B&K 128.1 142 73.8 SSR12100 815-23R30M-DS 815-23T SPLIT SPKT 30MM B&K 128.1 142 73.8 SSR121080 - 815-21T SPLIT SPKT 25MM BORE 116.1 129 68.80 SSR121081 - 815-21T SPLIT SPKT 30MM BORE 116.1 129 68.80 SSR121085 - 815-23T SPLIT SPKT 25MM BORE 128.1 142 73.8 SSR121086 - 815-23T SPLIT SPKT 30MM BORE 128.1 142 73.8 SSR121090 - 815-25T SPLIT SPKT 25MM BORE 140.1 154 79.8 SSR121091 - 815-25T SPLIT SPKT 30MM BORE 140.1 154 79.8

SYSTEM PLAST SPROCKETS

41.3

H P

itch

Dia

m.

C O

uts

ide

Dia

m.

38

DF

S+

1+

0

+ 0.4+ 0.2

38

DF P9

S+

1+

0

45

53

CO

uts

ide

Dia

m.

DF

38

S+

1+

0

B Pitch Diam.

+0.6+0.4DF P9

38

S+

1+

0

B Pitch Diam.

Features:• Completely closed structure, easier to clean and to disinfect• Split versions: quick and easy replacement

Material:Polyamide, screws in S/S, nuts in nickel plated brass.

Features:• Split versions: quick and easy replacement

Material:Polyamide, screws in S/S, nuts in nickel plated brass.Page 5

Page 5


SSR Sprocket Straight Run Chain - 820 - 831 (Moulded)


B mm

S mm

SSR12057 820-21R25M-DS 820-21T SPLIT SPKT 25MM B&K 129 116.1 67.80 SSR12058 820-21R30M-DS 820-21T SPLIT SPKT 30MM B&K 129 116.1 67.80 SSR12069 820-25R25M-DS 820-25T SPLIT SPKT 25MM B&K 154 140.1 79.8 SSR12070 820-25R30M-DS 820-25T SPLIT SPKT 30MM B&K 154 140.1 79.8 SSR12104 820-23R25M-DS 820-23T SPLIT SPKT 25MM B&K 142 128.1 73.8 SSR12105 820-23R30M-DS 820-23T SPLIT SPKT 30MM B&K 142 128.1 73.8 SSR121095 820-21R25M-RS 820-21T SPLIT SPKT 25MM BORE 129 116.1 67.80 SSR121096 820-21R30M-RS 820-21T SPLIT SPKT 30MM BORE 129 116.1 67.80 SSR121100 820-23R25M-RS 820-23T SPLIT SPKT 25MM BORE 142 128.1 73.8 SSR121101 820-23R30M-RS 820-23T SPLIT SPKT 30MM BORE 142 128.1 73.8 SSR121105 820-25R25M-RS 820-25T SPLIT SPKT 25MM BORE 154 140.1 79.8 SSR121106 820-25R30M-RS 820-25T SPLIT SPKT 30MM BORE 154 140.1 79.8

38

DF

S+

1+

0

+0.4+0.2 41.3

H P

itch

Dia

m.

C O

uts

ide

Dia

m.

16

DF

38

S+

1+

0

B Inside Diam.

+0.6+0.4

16

53

CO

uts

ide

Dia

m.

45 (Hub)

DF P9

38

S+

1+

0

B Inside Diam.


Features:• Completely closed structure, easier to clean and to disinfect• Quick and easy replacement


Features:• Maximum keyway load


SSR Sprocket Straight Run Chain - 820 - 831 (Machined)


H mm

S mm

SSR12962 820-21R18M-RMS 820-21T SPLIT MACH SPKT 18MM BORE 129 129.26 67.80 SSR12963 820-23R18M-RMS 820-23T SPLIT MACH SPKT 18MM BORE 142 141.21 73.80 SSR12964 820-25R18M-RMS 820-25T SPLIT MACH SPKT 18MM BORE 154 153.21 79.8

Page 6,10

Page 6,10


SSR Sprocket Straight Run Chain - 821 (Machined)


H mm

S mm

SSR12903 800-25R18M-RMS 805/821-25T SPLIT MACH SPKT 18MM BORE 154 153.21 79.80

38

S+

0.1

+ 0

C O

uts

ide

Dia

m.

58.5

H P

itch

Dia

m.

B Inside Diam.

DF +0.4 +0.2

16+0- 0.138

S+

0.1

+ 0

DF P9

B Inside Diam.

38

DF

S+

1+

0

+ 0.4+ 0.2 80

H P

itch

Dia

m.

C O

uts

ide

Dia

m.




Features:• Quick and easy replacement• High strength


SSF Sprocket Side Flex Chain - 878 - 879 - 880 (Moulded)


C mm

H mm

S mm

SSF121001 880-10R25M-DS 879/880-10T SPLIT SPKT 25MM B&K 107 122 123.30 65.25 SSF121002 880-10R30M-DS 879/880-10T SPLIT SPKT 30MM B&K 107 122 123.30 65.25 SSF12400 880-12R25M-DS 879/880-12T SPLIT SPKT 25MM B&K 131 147 146.8 77.2 SSF12403 880-12R25M-RS 879/880-12T SPLIT SPKT 25MM BORE 131 147 146.8 77.2 SSF12404 880-12R30M-RS 879/880-12T SPLIT SPKT 30MM BORE 131 147 146.8 77.2 SSF12711 880-12R30M-DS 879/880-12T SPLIT SPKT 30MM B&K 131 147 146.8 77.2

Page 7,10

Page 7,8,11,13



C O

uts

ide

Dia

m.

58.5

H P

itch

Dia

m.

2238

S+

0.1

+ 0

DF+ 0.4+ 0.2

B Inside Diam.

- 0.1- 038

S+

0.1

+ 0

DF P9

B Inside Diam.

38

S+

1+

0

H P

itch

Dia

m.

C O

uts

ide

Dia

m.

42.5

Ø M

16+0- 0.1

DF+ 0.4+ 0.2

B Inside Diam.




SSF Sprocket Side Flex Chain - 878 - 879 - 880 (Machined)


H mm

B mm

M mm

S mm

SSF12911 880-10R18M-RMS 879/880-10T SPLIT MACH SPKT 18MM BORE 122 123.3 107.00 85 65.25 SSF12912 880-11R18M-RMS 879/880-11T SPLIT MACH SPKT 18MM BORE 135 135.2 119.00 90 71.2 SSF12913 880-12R18M-RMS 879/880-12T SPLIT MACH SPKT 18MM BORE 147.3 147.2 131 95 77.2

SSF Sprocket Side Flex Chain - 882 - 8257 (Moulded)


C mm

H mm

S mm

SSF12114 882-12R25M-DS 882/8257 12T SPLIT SPKT 25MM B&K 128 149.2 147.20 78.4 SSF12115 882-12R30M-DS 882/8257-12T SPLIT SPKT 30MM B&K 128 149.2 147.20 78.4 SSF12119 882-12R25M-RS 882/8257-12T SPLIT SPKT 25MM BORE 128 149.2 147.20 78.4 SSF12120 882-12R30M-RS 882/8257-12T SPLIT SPKT 30MM BORE 128 149.2 147.20 78.4

Page 7,8,11,13

Page 9,11,12



H P

itch

Dia

m.

C O

uts

ide

Dia

m.

42.5

Ø M

22+0- 0.138

S+

1+

0

DF+ 0.4+ 0.2

B Inside Diam.

DF

11

H P

itch

Dia

m.

C O

uts

ide

Dia

m.

Ø 9

6

50



Features:• Sprockets are supplied with standard 20 mm bore and can be produced on request with a finished bore according to your drawing.

Application: Chains series 600

Material:Polyamide


SSF Sprocket Side Flex Chain - 882 - 8257 (Machined)


H mm

B mm

M mm

S mm

SSF12915 882-10R18-RMS 882/8257-10T SPLIT MACH SPKT 18MM BORE 125 123.2 104.00 75 66.4 SSF12916 882-11R18-RMS 882/8257-11T SPLIT MACH SPKT 18MM BORE 137 135.2 116.00 85 72.4 SSF12917 882-12R18-RMS 882/8257-12T SPLIT MACH SPKT 18MM BORE 149 147.2 127.90 90 78.4

SOT Sprocket Other - CC600 - CC600F –CC600P


H mm

SOT12326 600-8R20M-RM 8T CC600 SPKT WHITE 18MM BORE 172 166 SOT12327 600-10R20M-RM 10T CC600 SPKT WHITE 18MM BORE 215 205

Page 9,11,12

Page 14,15


SOT Sprocket Other - Shaft Collars

Code Smart Guide Description d mm

D mm

L mm

K mm Screws

SOT12698 VG-SC-R12M SHAFT COLLAR SPLIT 12MM 12 30 12 20 M3 SOT12697 VG-SC-R15M SHAFT COLLAR SPLIT 15MM 15 39 14 27 M4 SOT12701 VG-SC-R16M SHAFT COLLAR SPLIT 16MM 16 30 12 22 M3 SOT12702 VG-SC-R20M SHAFT COLLAR SPLIT 20MM 20 39 14 29 M4 SOT12703 VG-SC-R25M SHAFT COLLAR SPLIT 25MM 25 44 14 34 M4 SOT12704 VG-SC-R30M SHAFT COLLAR SPLIT 30MM 30 49 16 39 M4 SOT12705 VG-SC-R35M SHAFT COLLAR SPLIT 35MM 35 56 16 45 M4 SOT12706 VG-SC-R40M SHAFT COLLAR SPLIT 40MM 40 64 18 51.5 M5


Material:Reinforced polyamide bolts in S/S, threaded inserts nickel plated brass.

Use:This parts can be used on the conveyors as a reference point, when positioning side guides or idler sprockets.

Note:Split shaft covers with key way available on request.

SOT Sprocket Other - 1700 - 1702

Code Smart Guide Description DF mm

B mm

C mm

M mm

S mm

SOT12745 1700-10R20M-RMS 10T 1700/1701/1702 MACH SPLIT SPKT 18MM 18 137 165 110 69

50

S+

1+

0

DF P9

C O

uts

ide

Dia

m.

Ø M

45

11.1B Inside Diam.

Features:• Completely closed structure, easier to clean and to disinfect• Quick and easy replacement• Split construction

Application: • Chain series 1700/1701/1702

Material:PolyamidePage 15,16


SYSTEM PLAST PLASTIC MODULAR BELT

Application Examples

SYSTEM PLAST PRESENTS AN UNPRECEDENTED RANGE OF PRODUCTS

• Based on a long experience in the field, System Plast/Dotmar have worked hard on product development. Now we are presenting you this overview of our sensational complete range of slat band chains.

• This full range is widely used by leading manufacturers and end-users in the beverage and other industries. The range, supported by the professionalism, competence and enthusiasm of all the staff combined with on-going research and development, guarantees state-of-the-art solutions and excellent performance.

• System Plast/Dotmar is giving the industry a new and bright dimension!

For application questionnaire please contact your sales representative.


One track belts 2120

Modular belts 2120

Belts with transfer wing 2120

LBLBLBLBPPPPLBLBLBLBPPPP BBBBBBBBEEEEEEEELLLLLLLLTTTTTTTTLLLLLLL FLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOP

WIWIWIWITHTHTHTH GGGGUIUIUIUIDEDEDEDE BBBBARARARARWIWIWIWITHTHTHTH GGGGUIUIUIUIDEDEDEDE BBBBARARARAR

One track belts 2120 Modular belts 2120 Modular belts 2121

Modular belts 2120 One track belts 2190

Modular belts 2120 Modular belts 2190

Modular belts 2120

Side indent 2120

Modular belts 2122

FLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOP GRGRGRGRIPIPIPIP BBBBELELELELTTTTGRGRGRGRIPIPIPIP BBBBELELELELTTTT FLFLFLFLUSUSUSUSHHHH GRGRGRGRIDIDIDIDFLFLFLFLUSUSUSUSHHHH GRGRGRGRIDIDIDID FLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOPIMPERIAL WIDTHSMETRIC WIDTHS

Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 20.000 N/m

Belt material: LFG -TPRMax Load Capacity: 15.000 N/m


100 mm increments Belt material: LFG - NGG - XPG - PP - ASMax Load Capacity: 20.000 N/m




Belt material: LFGMax Load Capacity: 20.000 N/m




Belt material: LFG - PPMax Load Capacity: 20.000 N/m


Means: 1/2” Pitch Stocked in Australia Assembled in Australia1/2


Belt material: LFG - NGE - PP - ASMax Load Capacity: 20.000 N/m



Belt material: LFG - TPR / NGE - TPRMax Load Capacity: 20.000 N/m





100mm incrementsBelt material: LFG - NGE - PP - ASMax Load Capacity: 20.000 N/m



Belt material: LFG - NGEMax Load Capacity: 20.000 N/m




Refer to page 30-33




Belt material: LFB - LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m

Belt material: LFB - LFG - NGE - PP - ASMax Load Capacity: 25.000 N/m











One track belts heavy duty 2251

METRIC WIDTHS IMPERIAL WIDTHSFLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOP GRGRGRGRIPIPIPIP BBBBELELELELTTTTGRGRGRGRIPIPIPIP BBBBELELELELTTTT FLFLFLFLATATATAT TTTTOPOPOPOPFLFLFLFLATATATAT TTTTOPOPOPOP

Modular belts heavy duty 2251


Belts with side indent heavy duty 2251

PEPEPEPERFRFRFRFORORORORATATATATEDEDEDED TTTTOPOPOPOPPEPEPEPERFRFRFRFORORORORATATATATEDEDEDED TTTTOPOPOPOP

Belts with transfer wing heavy duty 2251

LBLBLBLBPPPP LBLBLBLBPPPP BBBBBBBBEEEEEEEELLLLLLLLTTTTTTTTLLLLLLLModular belts heavy duty 2251


Modular belts heavy duty 2251 1”

1”

1” 1” 1”1”

1” 1”

1”

RARARARAISISISISEDEDEDED RRRRIBIBIBIBRARARARAISISISISEDEDEDED RRRRIBIBIBIB

Raised rib belts 2500 ”2


Belt material: LFG - TPRMax Load Capacity: 38.000 N/m




Belt material: LFG - TPRMax Load Capacity: 38.000 N/m



Belt material: LFGMax Load Capacity: 38.000 N/m

One track belts heavy duty 2252

Belt material: PPG - LFG - NGGMax Load Capacity: 30.000 N/m (PPG)





Belt material: LFG - NGEMax Load Capacity: 38.000 N/m

Belt material: PPG - LFG - NGEMax Load Capacity: 30.000 N/m (PPG)









Belt material: LFG - NGE - PP - ASMax Load Capacity: 2.500 N/mR.min.: 500

Belt material: LFG - LFW - XPG - NGEMax Load Capacity: 30.000 N/mRadius - width ratio: 1.6

Belt material: LFG - LFW - NGEMax Load Capacity: 30.000 N/mRadius - width ratio: 1.6

Belt material: LFB - LFG - NGE - PP - ASMax Load Capacity: 30.000 N/mRadius - width ratio: 1.9


Belt material: LFG - LFW - XPG - NGEMax Load Capacity: 30.000 N/mRadius - width ratio: 1.0





Belt material: LFG - LFW - NGEMax Load Capacity: 30.000 N/mRadius - width ratio: 1.0


SYSTEM PLAST MULTI-DIRECTIONAL ROLLER TOP BELT

Freedom of movement!2253 RT is designed for products with flat bottom surfaces, such as boxes, trays or stacks of cardboard.

In the packaging area of a bottle line, 6-pack containers can be precisely positioned before they are further boxed or palletized. Distribution centres may select items for pallet loading by shifting the package sideways without the use of mechanical pushers. In the corrugated paper industry, the 2253 RT belt can be used to reduce package damage by transferring your stacks of cardboard without the use of pushers or external guides. The 2253 RT provides a touch less conveying solution.

Application examples

Product positioning

Reject stations

Product orientation

Automatic storage systems


SYSTEM PLAST MULTI-DIRECTIONAL ROLLER TOP BELT

Rotation with product moving

When two parallel running belts are positioned underneath the Roller Top belts, and running in different directions, containers in the middle of the belt will rotate. This condition is ideal for applica-tions where product orientation is important, for example, the in feed to a palletizer.

In this case, containers can be moving forward while rotating.

Double speed

When the belt is moving and the rollers are in contact with a fixed support area, the rollers will start rotating. This will result in movement of the product with a speed that is twice the speed of the belt. This function is very useful when products must be separated from each other. This function enables the belt to run at lower speed, and that improves belt life and reduces energy consumption.

Rotation with product stopped

When using a rotating disc underneath the Roller Top belt, you can have optimum control of the rotation of the product.

The Roller Top belt must be stopped during rotation.

Lateral movement

With a secondary activated belt positioned 90 degrees to the travel direction of the Roller Top belt, the system can transfer your package without external guides. This scenario is ideal for reject conveyors or any application requiring rapid 90 degree transfer of the conveyed item. Product positioning can also be achieved by this configuration.




ONE PIECE SPROCKETS - Floating

40x40 65x65Part number Part number

123213 123214

2253 ROLLER TOP IMPERIAL SIZE (PITCH 1” - 25.4 MM)

2253 RT SPROCKETS AND IDLER WHEELS

Backflex radius: 40 mm - 1.575 inch.Max load capacity: 9.000 N/m - 617 lbs/ftMax load per ball: 0.5 kgWeight: 10.5 kg/m2 - 2.15 lb/ft2Standard length:Up to 9 inch width: 1.016 mm - 40 inchAbove 9 inch width: 508 mm - 20 inchStandard pin material: PBT (white)

Material: Polyamide

Width WBelts Ref. Code

inch mm

3.00 76 2253 - 0003 RT 261400LFB

6.00 152 2253 - 0006 RT 261401LFP

9.00 229 2253 - 0009 RT 261402LFB

12.00 305 2253 - 0012 RT 261403LFB

15.00 381 2253 - 0015 RT 261404LFB

18.00 457 2253 - 0018 RT 261405LFB

21.00 533 2253 - 0021 RT 261406LFB

24.00 610 2253 - 0024RT 261407LFB

27.00 686 2253 - 0027 RT 261408LFB

30.00 762 2253 - 0030 RT 261409LFB

33.00 838 2253 - 0033 RT 261410LFB

36.00 914 2253 - 0036 RT 261411LFB

39.00 991 2253 - 0039 RT 261412LFB

42.00 1067 2253 - 0042 RT 261413LFB

45.00 1143 2253 - 0045 RT 261414LFB

Z Cmm

Hmm

Smm

18 147.65 146.3 68

Width WBelts Ref. Code

inch mm

48.00 1219 2253 - 0048 RT 261415LFB

51.00 1295 2253 - 0051 RT 261416LFP

54.00 1372 2253 - 0054 RT 261417LFB

57.00 1448 2253 - 0057 RT 261418LFB

60.00 1524 2253 - 0060 RT 261419LFB

63.00 1600 2253 - 0063 RT 261420LFB

66.00 1676 2253 - 0066 RT 261421LFB

69.00 17.53 2253 - 0069RT 261422LFB

72.00 1829 2253 - 0072 RT 261423LFB

75.00 1905 2253 - 0075 RT 261424LFB

78.00 1981 2253 - 0078 RT 261425LFB

81.00 2057 2253 - 0081 RT 261426LFB

84.00 2134 2253 - 0084 RT 261427LFB

87.00 2210 2253 - 0087 RT 261428LFB

90.00 2286 2253 - 0090 RT 261429LFB


CWS Wear Strips - Flat

Code Smart Guide Description L x H mm

Coil mt Material Colour

CWS20x3 - WEARSTRIP 20X3MM 20X3 85 UHMW-PE Natural CWS25x3 - WEARSTRIP 25X3MM 25x3 85 UHMW-PE Natural CWS25x3G VG-F253M-G-200 WEARSTRIP 25X3MM 25x3 85 UHMW-PE Green CWS25x5 - WEARSTRIP 25X5MM 25x5 50 UHMW-PE Natural CWS30x3 - WEARSTRIP 30X3MM 30x3 85 UHMW-PE Natural CWS35x3 - WEARSTRIP 35X3MM 35x3 85 UHMW-PE Natural CWS35x3G - WEARSTRIP 35X3MM 35x3 85 UHMW-PE Green CWS50x3 - WEARSTRIP 50X3MM 50x3 85 UHMW-PE Natural CWS50x5 - WEARSTRIP 50X5MM 50x5 50 UHMW-PE Natural CWS50x6 - WEARSTRIP 50X6MM 50x6 40 UHMW-PE Natural

CWS Wear Strips - Flat Adhesive Back

Code Description L x H mm

Coil mt Material Colour

CWSPA1000-062 WEARSTRIP ADHESIVE BACK 25X1.5MM 25x1.0 15 UHMW-PE Natural CWSPA1500-062 WEARSTRIP ADHESIVE BACK 30X1.5MM 30x1.5 15 UHMW-PE Natural CWSPA2000-125 WEARSTRIP ADHESIVE BACK 50X3.0MM 50x3.0 15 UHMW-PE Natural

CWS Wear Strips - Profiles

Code Smart Guide Description Ref. Coil mt Material Colour

CWS19004N VG-L20M-B-200 L PROFILE L 20MM (R7.1) R7.1 100 UHMW-PE Black

SYSTEM PLAST CONVEYOR COMPONENTS

Material:Extruded ultra high molecular weight polyethylene.Max continuous service temperature in air 900C.Water absorption coefficient = 0.

Available in Nolu S

upon request

Available in Nolu S

upon request




CWS19001V VG-Z18M-G-200 Z PROFILE L 20MM (R7) R7 100 UHMW-PE Green



CWS19005V VG-Z20M-G-200 REINFORCED Z PROFILE (R205) R205 45 UHMW-PE Green



CWS19003V VG-J21M-G-200 CLAMP ON FLAT PROFILE L 21MM (R10) R10 60 UHMW-PE Green



CWS19007V VG-JL19M-G-200 CLAMP ON L PROFILE L 21MM (R10.1) R10.1 60 UHMW-PE Green

2.8

2113.5

10

3 1.5

R1.3R5

10


2.8

2113.5

10

2

53

1.5

R1.3R5

10

Available in Nolu S

upon request

Available in Nolu S

upon request

Available in Nolu S

upon request

Available in Nolu S

upon request



Code Smart Guide Description Coil mt Material Colour

CWS19S00015-30M VG-JS100-125-100 CLIP ON FLAT 25MM WIDE PROFILE 30 UHMW-PE Natural

CWS Wear Strips - Profiles Code Smart Guide Description Ref. Coil Material Colour

CWS19S00016-30M VG-JSL075-125-100 CLAMP ON Z PROFILE UHMW-PE R119 70 UHMW-PE Green

CWS Wear Strips - Drive Rivet for Profile Wear Strip

Code Smart Guide Description L mm

H mm

Min mm

T mm - Max

Bag Quantity Material Colour

CWS14S00087 VG-750-20 DRIVE RIVET 1" LONG POM 25 3 6.5 19 100 PA-POM White

CWS Wear Strips - Return Profile


CWS19067V VG-F206M-G-200 RETURN WEAR STRIP FOR SERPERTINE R263-WS20x5 60 UHMW-PE Green



CWS1900058-30M VG-P18CC-100 CLAMP ON FLAT PROFILE L19MM 30 UHMW-PE Natural


31.

33.2

9.5

19

3

193

1.33.

2

9.5

25

193

3

1.33.

2

9.5

22

19

3

Available in Nolu S

upon request

Available in Nolu S

upon request

Available in Nolu S

upon request


CWS Wear Strips - Chain Guide Wear Strip

Code Smart Guide Description Ref. Length mt Material Colour

CWS19070 VG-P330CM-G-20 WEARSTRIP GREEN SUIT 19048 & 19097 W90 6 UHMW-PE Green

CWS Wear Strips - Chain Guide Metal Profile

Code Smart Guide Description Ref. Length mt Material Colour

CWS19097 VG-A330M-20 CHAIN GUIDE ALUM PROFILE AP2000 6 Aluminium Grey


Code Smart Guide Description Length mt Material Colour

CWS19063KVC VG-S4P330CM-G-10 S/S PROFILE & WEAR STRIP FLAT 430SS 3 UHMW-PE Green



CWS19064KVC VG-S4P330CRM-G-10 S/S PROFILE & WEAR STRIP CTR GUIDE 430SS 3 UHMW-PE Green


29.5

8.2

13.516.5

11.5

4.6

3

19

Available in Nolu S

upon request

Available in Nolu S

upon request


CWS Wear Strips - Shoe for SS Profile Code Smart Guide Description For Screws Material Colour CWS14110 - WEAR STRIP SHOE:85MM FOR 19048 PROFILE M6 PA Black

CWS Wear Strips - Shoe for SS Profile Code Smart Guide Description For Screws Material Colour

CWS14110T - WEAR STRIP SHOE:88MM FOR 19048 PROFILE M6 PA Black

CWS Wear Strips - Bar Cap Profiles

Code Smart Guide Description Bar

Thickness mm

A mm

B mm

C mm

D mm

E mm

Length mt

CWSVG-P116SBC-250 VG-P116SBC-250 BAR CAP PROFILE 1.5MM UHMW-PE NATURAL - 76MT 1.5 6.5 8.6 2 6.5 2.3 80 CWSVG-P204-250 VG-P204-250 BAR CAP PROFILE 3.0MM UHMW-PE NATURAL - 76MT 3.0 6.5 9 3.3 6.5 2.3 80


Material:Extruded ultra high molecular weight polyethylene.Max continuous service temperature in air 900C.Water absorption coefficient = 0.

Application:Shoes are used to help chain guide between idler wheels and wear strip and must be fixed with M6 screws.

With chain L 82, 5 - K325

Application:Shoes are used to help chain guide between idler wheels and wear strip and must be fixed with M6 screws.

With chain L 82, 5 - K325 pitch P= 88mm

Available in Nolu S

upon request


CWS Wear Strips - Bar Cap Profile


CWS19S00056-30M VG-P18BC-100 BAR CAP PROFILE 3MM 30 UHMW-PE Natural CWS19S00056-30M-NS VG-P18BC-NS-100 BAR CAP PROFILE 3MM 30 Nolu-S Light Grey



CWS19S00062-3M VG-P18HD-3M BAR CAP PROFILE 3MM 3 UHMW-PE Natural



CWS19S00066-30M VG-P316BC-30M BAR CAP PROFILE 5MM 30 UHMW-PE Natural



CWS19S00067-3M VG-P316HD-3M BAR CAP PROFILE 5MM HD 3 UHMW-PE Natural



CWS19S00052-30M VG-14BC-100 BAR CAP PROFILE 6MM (R23) 50 UHMW-PE Natural



CWS19S00081-75M R236 - VG-PM10BC-75M BAR CAP PROFILE 10MM (R236) 3 UHMW-PE Natural


8

3

12.5

3.2 9.5

11

19

3.2

10.5

8.5

3 mm

3 mm

6.3

9.5

12.5

12.5

3

6 mm

10.5

10.5

5.1

7.5

3

5 mm

10.5

8.5

16

19

4.8

*5 mm

10

16

12.5

3.518.5

Available in Nolu S

upon request

Available in Nolu S

upon request

Available in Nolu S

upon request

Available in Nolu S

upon request

Available in Nolu S

upon request

Available in Nolu S

upon request


CWS Wear Strips - Side Guide Wear Strip

Code Smart Guide Description Ref. A mm

B mm

C mm

D mm

E mm

Weight (Kg/m)

Length mt Material Colour

CWS19052V VG-P650M-G-10 C PROFILE TO SUIT 50 X 6MM BAR R94 6.5 12 51 60 36 0.27 3 UHMW-PE Green CWS19053V VG-P840M-G-10 C PROFILE TO SUIT 40 X 8MM BAR R112 8.5 14 41 50 27.5 0.25 3 UHMW-PE Green CWS19054V VG-P330M-G-10 C PROFILE TO SUIT 30 X 3MM BAR R16 3.5 10 30.5 40 20 0.20 3 UHMW-PE Green

CWS Wear Strips - Snap On Wear Strip for Round Bar

Code Smart Guide Description Ref. A mm

B mm

C mm

Rod Dia mm

Weight Kg/m

Coil mt Colour

CWS19056B VG-P12MRD-100 SNAP ON C PROFILE 12MM ROD R11 17 13 1 12 0.07 30 Natural CWS19061B VG-P10MRD-100 SNAP ON C PROFILE 10MM ROD R95 15 11 0.5 10 0.06 30 Natural

CWS Wear Strips - Neck Guide Wear Strip


CWS19S00037NSR-30 VG-NG125-SR-30M NECK GUIDE WEARSTRIP 30 Nolu-SR Dark Grey


9.9

3 5

5

32

8.1

Helps guide PET and HDPE containers in high speed, air conveying applications. Nolu-SR is a proprietary alloy of reinforced UHMW and other USDA accepted lubricants, resulting in a harder, lower friction material that is ideal in these applications. Though design differ, the material of choice is Nolu-SR, proven to increase throughout, reduce jams and wear longer.

Material:Nolu-SR is a special UHMW with modified molecular structure helps guide PET containers in high speed applications.


CRC Chain Return Components - Low Noise Roller - TPR

Code Smart Guide Description Rod Dia L Dia Material Colour

mm mm mm Roller Rubber Green - Roller CRC12836RN VG-3RU-205-60-G RETURN ROLLER LOW NOISE 20 82.5 67 HD-PE TPR Grey - Rubber

CRC Chain Return Components - Roller

Code Smart Guide Description Rod Dia mm

L mm

Dia mm Material Colour

CRC121550 R-60B20ML85-PEG RETURN ROLLER 85X60X20.5 ID 20 84.5 60 PE-HD Green

CRC Chain Return Components - Guide Flanges


E mm Material Colour

CRC12894 F-100B20ML2-PPG GUIDE FLANGE 100X2X20.5 ID 20 100 PP Green

CWS Wear Strips - Conic Side Guide

Code Smart Guide Description Ref. Length mt Material Material

Metal Profile Colour

CWS19033 VG-LSST-1.25-10 CONIC GUIDE FLAT 31MM S/S 3MT - WHITE V6 3 UHMW-PE SS304 Natural CWS19019 VG-LSSR-10 CONIC GUIDE RADIUS R7 S/S 3MT - WHITE V1 3 UHMW-PE SS304 Natural


80

L

Ø

ØE

80

L

Ø

ØE

Characteristics:• Reduced noise level• Very low friction coefficient• No liquid absorption• Excellent wear and chemical resistance• Completely closed structure, easier to clean and disinfect• Water light

Note: Image and drawing above refers to CWS19033

Characteristics:• Very low friction coefficient• No liquid absorption• Excellent wear and chemical resistance• Completely closed structure, easier to clean and disinfect• Water light

Characteristics:• Very low friction coefficient• No liquid absorption• Excellent wear and chemical resistance

Note: Image and drawing above refers to CWS19019

Available in Nolu S

upon request


CRC Chain Return Components - Sliding Shoe Code Smart Guide Description Material Colour

CRC14343 SHOE-53L102-S25C-PEG CHAIN STRECHER SLIDING SHOE PE Green

CRC Chain Return Components - Rollers

Code Smart Guide Description Rod Dia mm Material Colour

CRC12307 RF41B16ML47-PEB RETURN ROLLER DBL FLG 45X41X16.5 ID 12 PE(HD) Black

CRC Chain Return Components - Rollers

Code Smart Guide Description Rod Dia mm Material Colour

CRC12827N RF41B16ML28-PEG RETURN ROLLER FLG 27.5X41X16.5 16 PE(HD) Black

CRC Chain Return Components - Return Spacer

Code Smart Guide Description Shaft Square Material Colour CRC14320 SPT-84-S20C CHAIN RETURN SPACER FOR SERPENTINE 20x20 PA Black

CRC Chain Return Components - Guide Flanges


E mm

S mm Material Colour

CRC12798 F-90B20ML5-PPG GUIDE FLANGE 90X5X20.5 ID 20 90 5 PP Green


Ø

ØE

S


CMT Machined Track - 90 deg - 878 - 879 - 880 – 881 TAB

Code Smart Guide Description Tracks A mm

Radius R1 mm

CMT19017 VT880T325R500T1D BEND 90 DEG R500 880/881TABK325 1 100 500 CMT19018 VT880T450R610T1D BEND 90 DEG R610 880/881TABK450 1 130 610

CMT Machined Track - 90 deg – 882 TAB

Code Smart Guide Description Tracks A mm

Radius R1 mm

CMT19103 VT882T750R610T1D BEND 90 DEG R610 882TABK750 1 200 610 CMT19104 VT882T1D1000R610T1D BEND 90 DEG R610 882TABK1000 BLK 1 270 610 CMT19105 VT882T1D1200R610T1D BEND 90 DEG R610 882TABK1200 BLK 1 320 610

CRC Chain Return Components - Snap On Sliding Shoe

Code Smart Guide Description Length mm

Rod Dia mm Material Colour

CRC14833 SHOE-88L244-R20C-PEG SELF ADJUSTING SLIDING SHOE SNAP ON 20 88 20 PE Green


Note: More tracks available on request.

Materials:UHMW-PE Colour: BlackNolu-S Colour: Light grey

Supply: Corner tracks are supplied complete with carry and return plates.



Supply: Corner tracks are supplied complete with carry and return plates.

14.5 Ø

24.5

42

Ø6

80.5

Lg.

120

244

50

50

90

R1

A9.

518 25

7045

P P P

A

50

50

90

R1

P

A

159

58 90

30A


CMT Machined Track Straight - 878 - 879 - 880 – 881 TAB – MAG 1 Straight Track Section – 1 piece

Code Smart Guide Description A mm

B mm

C mm

D mm

E mm

F mm

L mm

CMT19350 VT880T325L2000T1 STRAIGHT TRACK 880TABK325 BLK 100 45 67 25 18 9.5 2000 CMT19351 VT880T450L2000T1 STRAIGHT TRACK 880TABK450 BLK 130 45 67 25 18 9.5 2000

CMT Machined Track Straight – 882 TAB - MAG 1 Straight Track Section – 1 piece


B mm

C mm

D mm

E mm

F mm

L mm

CMT19361 VT882T750L2000T1 STRAIGHT TRACK 882TABK750 BLK 200 60 84 30 24 15 2000 CMT19362 VT882T1000L2000T1 STRAIGHT TRACK 882TABK1000 BLK 270 60 84 30 24 15 2000 CMT19363 VT882T1200L2000T1 STRAIGHT TRACK 882TABK1200 BLK 320 60 84 30 24 15 2000




Supply:Corner tracks are supplied complete with carry and return plates.



Supply:Corner tracks are supplied complete with carry and return plates.

1

D E

1

F

B

C

A

L


DUAL MAGNETIC CORNER TRACKS

To order, please advise dimensional details:If high speed and or load?

Advantages:Steel and plastic chains can be used in the same curves which means simpler conveyor construction, reduced inventories and ultimately lower costs.

Stainless Steel side flexing magnetic retained chain has the same hinge width as the 815 series straight running chain and therefore uses the identical sprockets to the 815 series.

Easier maintenance construction:Magnetic retained chains do not incorporate the use of tab or bevel shoes, which allows the chain to be removed from the curve, without dismantling the chain. Maintenance is therefore quicker and simpler, which reduces downtime.

New Magnetic System with Metal Strip: “Extra” CurvesSystem Plast has recently developed a new magnetic corner retention system for dry-running applications.

The system, sets new performance standards in magnetic curve technology due to the inclusion of a unique metal strip mounted in the inside bearing face of the top section. This area is constantly under load due to the pressure/speed factor.

Main Advantages:• Extreme dissipation of heat significantly reduces wear• Under test conditions, lowest noise decibel levels were recorded• “Extra” curves are strongly recommended with plastic chains only!

InsertsThe magnetic corner tracks can be supplied with M8 brass inserts to your detailed drawing.

Magnetic Corner Tracks Special MaterialsOn request magnetic corner tracks for high speed and extremely abrasive applications can be supplied. Nolu SR.

Magnetic Corner Tracks Special DimensionsOn request magnetic corner tracks with special dimensions can be produced.

Chain Type Radius Angle No: of Tracks Track

Centres Thickness Overall Height

In feed Length Width Inside Overall

Width

Desc R Deg P H TH IL L L/2 TL


CSG Side Guide Components - Clamps for conic guide

Code Smart Guide Description Dia A mm

Dia B mm

CSG13006NV CL-CON-P14M SINGLE CLAMP CONIC GUIDE B&N 12 13.5


Code Smart Guide Description DP mm

CSG13789 CL-CON-P12100M SINGLE CLAMP CONIC GUIDE WITH ROD 12MM 12

CSG Side Guide Components - Clamps for conic guide Code Smart Guide Description L

CSG13S00250 VG-031-12-35 SINGLE CLAMP CONIC GUIDE L-90MM 90mm

CSG Side Guide Components - Clamps for conic guide Code Smart Guide Description

CSG13007 CL-CON-P258M ADJ SINGLE CLAMP CONIC CUIDE


Material:Clamp in reinforced polyamide bolt in stainless steel, nut in nickel plated brass.

Supply: Assembled

Material:Clamp in reinforced polyamide bolts in stainless steel, nut in nickel plated brass, rod in stainless steel AISI 303.

Supply: Assembled

Material:Clamp in reinforced polyamide bolts in stainless steel, nut in nickel plated brass, rod in stainless steel AISI 303.

Supply: Assembled

Material:Clamp in reinforced polyamide bolts in stainless steel, nut in nickel plated brass.

Supply: Assembled

Use: Mount on 25x8 flat bar.

Ø12.7

90 25

2525

35




CSG13120 VG-013-01 CONNECTING CLAMP CONIC GUIDE 50

CSG Side Guide Components - Clamps for rod profile guides

Code Smart Guide Description Guide Dia mm

CSG13721 CL-RD12-P SINGLE CLAMP 12MM NO PIN C/W NUT & BOLT 12



CSG13009NV CL-CON-PD12100M DOUBLE CLAMP CONIC GUIDE WTH PIN 12

58

Material:Reinforced polyamide nut, washer rod in stainless steel.

Supply: Assembled

Material:Stainless steel AISI 304, thickness S=2.56mm

Use: To connect two guide rails. The part can be tapped on with a hammer.

Material:Clamp in reinforced polyamide, bolt in stainless steel nut in nickel plated brass.

Supply: Assembled





Guide Dia mm

CSG13722 CL-RD12-P12100M SINGLE CLAMP WITH PIN 12MM ROD 12 12



CSG13770 CL-RD12-PD12100M DOUBLE CLAMP FOR 12MM ROD WITH PIN 12

92.5

72.5

A

A

ø 12

68

27

25

100

DP

40

Material:Clamp in reinforced polyamide, bolt in stainless steel nut in nickel plated brass, rod in stainless steel AISI 303.

Supply: Assembled

Material:Clamp in reinforced polyamide, bolt in stainless steel nut in nickel plated brass.

Supply: Assembled

Material:Clamp in reinforced polyamide, nut and rod in stainless steel.

Supply: Assembled

Note: Code 13761xp is supplied without rod.



Code Smart Guide Description Dia mm

L mm

K mm

Y mm

H mm

h1 mm

CSG13741 CL-RD10-P258M ADJ CLAMP 10MM ROD 10 58 33 21 18.5 16 CSG13744NV CL-RD12-P258M ADJ CLAMP 12MM ROD 12 59 34.5 24 21 19


CSG Side Guide Components - side guide brackets fixed


K mm

CSG13224 BKF-89W38-105P12H SIDE GUIDE BRACKET LARGE 12MM 12 10.5


Code Smart Guide Description Type Rod Dia

mm K

mm CSG13641 BKF-61W38-105P12 SIDE GUIDE BRACKET 12MM Standard 12 10.5


221

180

Ø

K

40

164

8461

9.5

4.5

52

65

5 7

50

257.

520

3.5

Ø

K40

187.

5

8489

9.5

52

65

5 7

Material:Reinforced polyamide, eyebolt and washer in stainless steel AISI 304, knob in polyamide with nickel plated brass insert.

Note:Max recommended tightening torque 4 Kgm.







K mm

CSG13696 BKF-66W31L-105P12 SIDE GUIDE BRACKET SMALL 12MM 12 10.5







CSG Side Guide Components - side guide brackets fixed Code Smart Guide Description Rod Dia

CSG13052 - EXTRA BRACKET LARGE 16MM 16

CSG Side Guide Components - side guide brackets adjustable

Code Smart Guide Description K mm Material

CSG13020 BKF-79W30-P14 BRACKET BODY LARGE FOR ADJ HEAD 10.5 PA-FG

CSG Side Guide Components - side guide brackets adjustable Code Smart Guide Description Material

CSG13040 BK-49W31L BRACKET BODY SMALL FOR ADJ HEAD PA-FG


CSG Side Guide Components - side guide brackets ss


CSG13S00011 VG-213R-12-01 S.S. GUIDE RAIL BRACKET 12MM 12 to 13


Material:Bracket and adjustable head in reinforced polyamide; eyebolt, nut, screws and washer in stainless steel AISI 304; knob in polyamide with nickel plated brass insert.

Note:Screw regulates rod position and head adjustability. Max recommended tightening torque 4 Kgm.

Material:Body in stainless steel, eyebolt and washer in stainless steel AISI 304, knob in reinforced polyamide with nickel plated brass insert.

Characteristic:• 304 stainless steel• Versatile, sanitary design• High temperature or corrosive environments• Tall or short, fixed or swivel

Ø

161

64

10.4

35

7547

60

29

3

150 64

(Ø12

mm

)

10.4

35

7547

Ø42

73

Material:Body in stainless steel, eyebolt and washer in stainless steel AISI 304, knob in reinforced polyamide with nickel plated brass insert.

CSG Side Guide Components - Side Guide Brackets Adjustable


K mm

CSG13054 BKR-69W44P-105P12 ADJ SIDE BRACKET 12MM 12 10.5 CSG13056 BKR-69W44P-105P16 ADJ SIDE BRACKET 16MM 16 10.5

CSG Side Guide Components - side guide brackets ss


CSG13S00001 VG-213-12-01 S.S. GUIDE RAIL BRACKET 12MM 12 to 13


CSG Side Guide Components - side guide brackets spacer Code Smart Guide Description Material

CSG13400 SP-7550T15 SPACER FOR BRACKET CSG13696 PA-FG

8.5

8.5

58 75

5

15

50

11


Application:Bracket code: 13696


The Speedset system is available in three maximum travel distance:

25mm travel

40mm travel

65mm travel

Single side adjustingRange of travel Range of travel

Double side adjusting

Largest container

Smallest container

Speedset - Quick Adjusting Guide Rail SystemAsk your representative for more information.


CSG Side Guide Components - Side Guide Adjustable Head Spacer Code Smart Guide Description Material

CSG13752 SP-R36T10 SPACER FOR ADJUSTABLE HEAD 11.5MM PA-FG

CSG Side Guide Components - side guide adjustable head


CSG13028 TOP-20P-P12B ADJ HEAD 12.5/M10 CLOSED 12

CSG Side Guide Components - side guide adjustable head

Code Smart Guide Description Head with knob

Head without knob

Rod Dia mm

CSG13037 TOP-20P-P12B ADJ HEAD WITH EYEBOLT 12MM/M10 Yes 12 CSG13037V TOP-23P-P12K ADJ HEAD WITH STAR KNOB 12MM Yes 12 CSG13039 TOP-23P-P16T ADJ HEAD WITH EYEBOLT 16MM/M10 Yes 16

CSG Side Guide Components - side guide rod adaptor Code Smart Guide Description Thread Rod Dia Material

CSG13S00259 VG-222JQ-M10 JOINTED ROD ADAPTOR M10 M10 M10 SS304


Ø16

12

27.5

54

12.5

Ø19

Material:Reinforced polyamide; eyebolt, nut and washer in stainless steel AISI 304.

Material:Reinforced polyamide; eyebolt, screw, nut and washer in stainless steel AISI 304. Hexagonal bushing in nickel plated brass.



Note: Each segment can be pulled out without removing pins and rollers.

Features:• Low noise rollers• Excellent for accumulation areas• Long life and smooth operation• Easy and quick installation



Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel. Pin and metal profile see the table.

Supply: 1m steel profile with 4 roller modules.

Applications: Designed for rugged boxes and containers.




CRG Roller Guides

Code Smart Guide Description L mt

Pin Material

Profile Material Colour

CRG16686LX RG-240H45W1000S ACCUM ROLLER GUIDE 1 ROLL 1 POM SS304 White

CRG Roller Guides


Pin Material


CRG16683L RG-240H70W1000S ACCUM ROLLER GUIDE 2 ROLL 1 MT 1 POM SS304 White











CRG Roller Guides


Pin Material


CRG16689L RG-240H95W1000S ACCUM ROLLER GUIDE 3 ROLL 1 SS430 SS304 White

CRG Roller Guides


Pin Material


CRG16400L RG-240H120W1000S ACCUM ROLLER GUIDE 4 ROLL 1 SS430 SS304 White


CRG Roller Guides

Code Smart Guide Description Pin Material

L mm Colour

CRG16600V RG-105H49-840M-G348 FLEXIBLE ROLLER MODULE - MINI SUIT 40X8 POM 348.5 Green

CRG Roller Guides


L mm Colour

CRG16605V RG-86H49-840M-G348 FLEXIBLE ROLLER MODULE - SINGLE SUIT 40X8 POM 348.5 Green

CRG Roller Guides


L mm Colour

CRG16500 RG-210H50-840M-G338 FLEXIBLE ROLLER MODULE SUIT 40X8 POM 338 Green


Material: Straps in reinforced polyamide, rollers in acetal resin, screws in stainless steel.

Applications: Designed for boxes and containers (glass and plastic bottles, tin cans, strong aluminium cans).

Features:• Improved design• Small rollers and pitch• Improved performance• Reduced dimensions• Low noise rollers• Excellent for accumulation areas• Long life and smooth operations• Easy and quick installations







32

5 9 18

30

3

88

33 49

Internal curve R min 400mm

External curve R min 450mm



1895



Supply: Single module L=348mm




CRG Roller Guides


L mm Colour

CRG16800V RG-105H81-840M-G348 FLEX ROLLER MODULE PIN SUIT 40X8 POM 348.5 Green

CRG Roller Guides


L mm Colour

CRG16805V RG-86H81-840M-G348 FLEX ROLLER MODULE SINGLE PIN 40X8 POM 348.5 Green

CRG Roller Guides - Modular Transfer Plates Code Smart Guide Description L Fastener Material

mm Pin Roller CRG16770 TME-330R3MR-FM MODULAR TRANSFER PLATE 3 ROW X 85 85 M6 SS430 PBT CRG16770-SR TME-330R3SR-FM MODULAR TRANSFER PLATE SR 3 ROW X 85 85 M6 SS430 PBT CRG16771 TME-450R3MR-FM MODULAR TRANSFER PLATE 3 ROW X 115 115 M6 SS430 PBT CRG16771-SR TME-450R3SR-FM MODULAR TRANSFER PLATE SR 3 ROW X 115 115 M6 SS430 PBT

/














- SR Single Roller


CCC Connecting Clamps - Cross Blocks Code Smart Guide Description DP1 DP2

Round

mm Square

mm Round

mm Square

mm CCC13114 CC-16-12M-12M CROSS BLOCK 12 x 12MM 12 10 12 10

CCC Connecting Clamps - T Clamp Code Smart Guide Description DP1

Round

mm Square

mm CCC13115 TC-20-12M T CLAMP 12MM 12 10

CRG Roller Guides - Modular Transfer Plates Code Smart Guide Description Ref Fastener Material

mm Pin Roller CRG16772 TME-330R5MR-FM MODULAR TRANSFER PLATE 5 ROW X 85 85 M6 SS430 PBT CRG16772-SR TME-330R5SR-FM MODULAR TRANSFER PLATE 5 ROW X 85 85 M6 SS430 PBT CRG16773 TME-450R5MR-FM MODULAR TRANSFER PLATE 5 ROW X 115 115 M6 SS430 PBT CRG16773-SR TME-450R5SR-FM MODULAR TRANSFER PLATE 5 ROW X 115 115 M6 SS430 PBT


Features: Cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced polyamide.

Use:Connects two round or square rods at 900.

Material:Reinforced polyamide with stainless steel fasteners.

Supply:Assembled

Features: Mounts to side of equipment to provide support for light duty rod type guide rail system.


Supply:Assembled

1.35

2011

.5

73.6

47.5

M6

R75

Ø11

21.5 Min27 Max

73.6

73.6

17.5 17.5 17.580115

17.55085

- SR Single Roller


CSC Frame Structural Components - Knobs Code Smart Guide Description M

CSC13492 KNF-50H41-M8H KNOB STAR FEM 50 X 42MM M8 8

CSC Frame Structural Components - Knobs

Code Smart Guide Description M CSC13341 KNF-50H39-M6H KNOB STAR FEM 50 X 42MM M6 6 CSC13343 KNF-50H39-M10H KNOB STAR FEM 50 X 42MM M10 10

CCC Connecting Clamps - Photocell Clamp Code Smart Guide Description DP1 DF

Round mm

Square mm

Dia mm

CCC13116 PC-25-12M-19M PHOTOCELL CLAMP 12MM 12 10 19 CCC13153 PC-25-10M-19M PHOTOCELL CLAMP 10MM 10 8 19

CCC Connecting Clamps - 2 Way Cross Block

Code Smart Guide Description DP1 mm

DP2 mm

CCC13135 CC-20-12M-12M SINGLE ACTION 2 WAY CROSS BLOCK DF12 12 12


Features: Used to hold many types of accessories. Numerous bore sizes available.


Supply:Assembled

Features: The special design provides a means for rapid adjustment of both vertical and horizontal side rail positions with the release of a single bolt or knob.

Material:Reinforced polyamide with stainless steel AISI 304.

Supply:Assembled

Material:Reinforced polyamide hexagonal insert in nickel plated brass.

Note:Max torque on the knob 2.5 Kgm. For further tightening work on the hexagon.


Note:Max torque on the knob 2.5 Kgm.

9Wr. 19




L1 mm

CSC13342 KNM-50H40-M1016H KNOB STAR MALE 50 X 42 MM 11.5 54 CSC13348 KNM-50H40-M1029H KNOB STAR MALE 50 X 42 MM 25 67.5

CSC Frame Structural Components - Knobs Code Smart Guide Description M

CSC13346 KNF-80H51-M12H KNOB STAR FEM 80 X 51MM M12 12


Code Smart Guide Description D mm

D mm

L mm

H mm

L mm

d1 mm Colour

CSC13484 KNF-40H26-M6 KNOB STAR FEM 40 X 25MM 40 M6 17 25.5 14.5 17 Black






Material:Polyamide, bushing in nickel plated brass.

Note:Star knob DIN 6335


CSC Frame Structural Components - Adjustable Ratchet Handles


B mm

H mm

D mm

S mm

d1 mm

d2 mm

h1 mm

h2 mm

h3 mm Colour

CSC14230 RH-45-M620-S ADJ RACHET HANDLE M6 X 30MM MALE 53 45 33.5 16 10.5 M6 14 37 20 10 Black CSC14234 RH-65-M830-S ADJ RACHET HANDLE M8 X 30MM MALE 75 66 41 20 13.5 M8 14 37 30 10 Black CSC14236 RH-80-M1030-S ADJ RACHET HANDLE M10 X 30MM MALE 92 80 53 24 16.5 M10 20 48 30 12 Black

CSC Frame Structural Components - Fixed Handles Code Smart Guide Description M Colour

CSC14115 HDL-120-M6-PAB HANDLE M6 140 X 40 6 Black CSC14116 HDL-120-M8-PAB HANDLE M8 140 X 40 8 Black CSC14117 HDL-120-M10-PAB HANDLE M10 140 X 40 10 Black

B

A

d1

d2d2

H

h1

D S

h2

h3


Material:Polyamide, insert in nickel plated brass.

Material:Polyamide, threaded insert in stainless steel AISI 304.

Material:Polyamide, threaded insert in brass.

h1

D S

B

d1

d2

A

h3

h2H

CSC Frame Structural Components - Adjustable Ratchet Handles


B mm

H mm

D mm

S mm

d1 mm

d2 mm

h1 mm

h2 mm

h3 mm Colour

CSC14220 RH-45-M6-S ADJ RACHET HANDLE M6 FEMALE 53 45 33.5 16 10.5 M6 12 29 8 7.5 Black CSC14221 RH-65-M8-S ADJ RACHET HANDLE M8 FEMALE 75 66 41 20 13.5 M8 15 34 11 7.5 Black CSC14222 RH-80-M10-S ADJ RACHET HANDLE M10 FEMALE 92 80 53 24 16.5 M10 20 44 16 7.5 Black


CSC Frame Structural Components - Fixed Handles Code Smart Guide Description M Colour

CSC14118 VG-632-M8-PAB HANDLE M8 158 X 58 8 Black

CSC Frame Structural Components - Hinges


B mm

C mm

D mm

E mm

F mm

G mm

H mm

I mm

L mm

M mm Colour

CSC40009 HNG-49M6-PA HINGE 180 DEG 49X49 M6 CAP SCREW 49 49 31 30 11 13 19 17 4 M5 14 Black


Code Smart Guide Description F mm

A mm

B mm Colour

CSC14104 VG-633-M6 SMALL HINGE 4 HOLE PA M6 CAP SCREW 6.5 10.5 6 Black CSC14105 VG-633-M8 SMALL HINGE 4 HOLE PA M8 CAP SCREW 8.5 13.5 4 Black


Code Smart Guide Description Type A mm

B mm

C mm

D mm

E mm

F mm

G mm

H mm

I mm

L mm

M mm

N mm Colour

CSC14106 VG-634-CC LARGE HINGE 4 HOLE PA M8 CAP SCREW 2 80 102 49.5 72.5 11.5 14.5 23.5 11.5 6 8.5 8 13.5 Black CSC14112 VG-634-AA LARGE HINGE 4 HOLE PA M6 CAP SCREW 2 80 102 49.5 72.5 11.5 14.5 23.5 11.5 6 6.5 6 10.5 Black CSC14113 VG-634-BB LARGE HINGE 4 HOLE PA M6 CAP SCREW 2 80 102 49.5 72.5 18 21 30 18 6 6.5 6 10.5 Black


Material:Reinforced polyamide, pin in stainless steel AISI 303.

Notes: Door can be opened up to 1800.

Material:Reinforced polyamide. Thread insert in brass.

Material:Reinforced polyamide, pin in stainless steel AISI 303.


Supply: Assembled

Material:Reinforced polyamide, pin in screw in AISI 303.Thread insert in brass.


Supply: Assembled

Supply: Assembled


CSC Frame Structural Components - Door Holder


B mm Material Colour

CSC14120 MAG-45-R5 MAGNETIC DOOR HOLDER 22.5 45 PA-FG Black

CSC Frame Structural Components - Spring Loaded Latch Code Smart Guide Description Material Colour

CSC40059 FT-LOCK32-R4 SPRING LOADED LATCH PA PA-FG Black

CSC Frame Structural Components - Panel Clamps

Code Smart Guide Description Tube mm

A mm

B mm

S mm Colour

CSC40051 PC-25T40-PAB PANEL CLAMP SQ TUBE 4MM THICK PC 25x5 25 40 4 Black CSC40052 PC-25T50-PA PANEL CLAMP SQ TUBE 5MM THICK PC 25x5 25 40 5 Black CSC40053 PC-25T60-PAB PANEL CLAMP SQ TUBE 6MM THICK PC 25x5 25 40 6 Black CSC40073 PC-30T60-PAB PANEL CLAMP SQ TUBE 6MM THICK PC 30x30 30 45 6 Black

CSC Frame Structural Components - Fixing Block


CSC40060 PMB-40M6-PAB FIXING BLOCK FOR PC 2.5 PA-FG Black


Application:The magnetic lock guarantees rapid door locking.It is easy to install and can be used with various structures in different materials.

Application:The latch guarantees a secure locking of doors and windows, and prevents the possibilities of accidental opening.

Material:Reinforced polyamide with stainless steel bolt.

Application:Panel clamps permit rapid installationof panels. The distance of 8mm, between the panel and frame simplifies the safety guard cleaning.

Supply: Assembled

Application:Block permit rapid installation of the panels and can be used with panels of different thicknesses.

Supply: Assembled


STRUCTURAL

Dotmar PolycarbonateVersatile Transparent Plastic Sheet.POLYCARBONATE - Premium Quality Polycarbonate Rod, Sheet and Tube is an engineering SEE THROUGHmaterial. Tough, easy to handle and easily fabricated to almost any shape. Polycarbonate is unique for its impact strength and shock load resistance.

Polycarbonate is light weight and well proven in situations that require a see through product in Precision Engineering, Process Machine Guarding, Architectural Glazing, General Manufacturing and Industrial applications.

• Extreme impact strength • Excellent resistance to high & low temperatures • OH&S compliant • Excellent transparency • Light weight & easy to process • Local stock / Warranties

Built To Perform• Machine guards • Safety & vandal resistant glazing • Sight glasses • Safety visors • Roof structures • Correctional facilities • Security applications • Electrical components

Virtually unbreakable Dotmar Polycarbonate PC’s impact strength is 250 times stronger than glass and 30 times stronger than acrylic making it the ideal material for shock resistance applications.

Ideal for vision panels, machine guards and acoustic enclosures, Dotmar Polycarbonate PC sheet is an excellent choice for applications where safety and protection is of utmost importance.

SheetWidth

Thickness- mm Colour Applications

PolycarbonateUV2

1220 x 2440 1 - 12mm

Clear

Two sided UV coat, signage, covered walk-ways, bus shelters, sky lights & exterior applications

1830 x 2440 2 - 12mm (Indent)

2050 x 3050 2 - 9.5mm (Indent)

for conditions and stock availability.

Sound Reduction - Polycarbonate products display exceptional sound reduction properties and even performs better than glass

Delivery Program

Panel Thickness mm

STC Rating

Polycarbonate Sheet Float Glass

3.0 25 234.5 29 266.0 31 279.5 34 30


CSC Frame Structural Components - Profile for sliding panels



CSC40054 SF-SPS-6M-PVCB-2500 PROFILE FOR 2 SLIDING PANELS 2PC 25 2 PE1000 Black

CSC Frame Structural Components - Profile for plain tube



CSC40057 SF-CD1-6M-PVCB-2000 FIXED PROFILE FOR 6MM PVC 25 2 PE1000 Black

CSC Frame Structural Components - Fixing Clamps


B mm

C mm Screws Material Colour

CSC14108 BCK-S330-M6 FIXING CLAMP M6 FOR 19048 SS PROFILE 10 6.2 4.5 M6 PA-FG Black CSC14109 BCK-S330-M8 FIXING CLAMP M8 FOR 19048 SS PROFILE 13 8.2 6 M8 PA-FG Black

CFS Frame Support Components - Side Mount Top Brackets

Code Smart Guide Description Tube Dia mm Colour

CFS14744N VG-3050E-R200T SIDE MOUNTING TOP BRACKET NEW 50.9 Black


Max 6mm

Application:Rapid wear strip assembly with M6 or M8 screws.

Notes:Screws are not included.

Material:Reinforced polyamide. Screw and not in washer in stainless steel AISI 304.

Notes:The bracket can be inclined in 5deg in both directions when using the lower hole and the upper slot hole. There are 2 optional holes that can easily be opened by removing the tin membrane.

In this way the centre distance of the hole can be• enlarge to 70mm or• reduce to 30mm

Then it is also possible to use in inclined in both directions.

Application:This profile can be used with 25x25 mm in different materials. It is used for small sliding window.

Supply:2m lengths in stock (1 upper and 1 lower profile).

Application:This profile can be used with 25x25 mm in different materials.

70

201

1960

122

44.5

Ø 64

61

80

20

51.5

M8

93.5

19.5


CFS Frame Support Components - Support Head

Code Smart Guide Description Tube Dia mm Colour

CFS14051 VG-3070-R200T SUPPORT HEAD SMALL 50.9 Black

CFS Frame Support Components - Support Head

Code Smart Guide Description For Tube Dia mm Colour

CFS14740 VG-3080-R200T SUPPORT HEAD 50.6MM LARGE 50.9 Black

CFS Frame Support Components - Connecting Joints

Code Smart Guide Description DP1 –Dia mm

DP2 – Dia mm

A mm

B mm

C mm

D mm

E mm

F mm Colour

CFS14743 VG-3110-R200T-R200T CONNECTING JOINT 50.9MM X 50.9MM 50.9 50.9 146 80 98 51 60 3 Black


M8

C

E

D

A

DP2 F

B

DP1

Material:Reinforced polyamide; screw, nut and washers in S/S AISI 304.

Note: Max recommended tightening torque 2Kgm.

Material:Reinforced polyamide; screw, nut and washers in stainless steel AISI 304.

Note: Max recommended tightening torque 2Kgm.

Material:Reinforced polyamide; screw, nut and washers in stainless steel AISI 304.

Note: Max recommended tightening torque 1.5 Kgm.


CFS Frame Support Components - Threaded Tube Ends Round


B mm

C mm

L mm

S mm

Ext Dia mm

Int Dia mm

Thickness mm

CFS14755 TE-R5115-BM16 TUBE END RD 50.9MM X 1.5MM M16 M16 50 48.4 49 38 50.9 47.9 1.5 CFS14764 TE-R5115-BM20 TUBE END RD 38.0MM X 1.5MM M16 M16 38 35.5 46.5 38 38 35 1.5

CFS Frame Support Components - Threaded Tube Ends Square


B mm

C mm

L mm

S mm

Ext Dia mm

Int Dia mm

Thickness mm

CFS14607 TE-S5015-BM16 TUBE END SQ 50MM X 1.5MM M16 M16 50 47.5 55 44 50 47 1.5 CFS14611 TE-S5020-BM20 TUBE END SQ 50MM X 2.0MM M16 M16 50 46.5 55 44 50 46 2.0 CFS14757 TE-S3816-BM16 TUBE END SQ 38.1MM X 1.6MM M16 M16 38 35.4 43 35 38.1 34.9 1.6 CFS14823 TE-S2515-BM12 TUBE END SQ 25.0MM X 1.5MM M12 M12 25 22.5 30 25 25 22 1.5

CFS Frame Support Components - Expansion plug

Code Smart Guide Description M mm

Round Tube mm Colour

CFS14352 TEE-R2015-BM8 EXPANSION PLUG FOR 20MM RD TUBE 8 20x1.5 Black


Material:Polyamide threaded bushing in nickel plated brass.

Round tubes Max static load

Ømm 30 38 42 48 50 60N 3000 5000 6000 6000 6500 8000

Material:Polyamide threaded bushing in nickel plated brass.

Square tubes Max static load

Ømm 25 30 35 38 40 50 60N 5000 5500 5500 6000 6000 10000 12000

Components:External parts in reinforced polyamide. Conical insert in nickel plated brass.

Technical Information: Max load for removal Kgf300 (static conditions).


CFS Frame Support Components - Support Base Bipod

Code Smart Guide Description DF1 Tube Dia mm Fasteners Colour

CFS15062 VG-BP-R200T-S BIPOD 50.9MM SS BOLTS 50.9 SS304 Black

CFS Frame Support Components - Support Base Cross Joint Bipod

Code Smart Guide Description DF1 Tube Dia mm

DF2 Tube Dia mm Fasteners Colour

CFS15070 VG-BPT-R200-T-R125-S BIPOD 180 DEG C/ JOINT 50.9MM SS BOLTS 50.9 42.4 SS304 Black


Notes: Screws not included.

Features:• Increased stability• Self cleaning design

Material:Reinforced polyamide threaded bushings and spacers in nickel plated brass.

Fasteners:See table.




145

69

Ø80

M16

Ø45

0

Ø49

0

85

ØD

F1

DF2

145

Ø45

0

Ø49

0

85

ØD

F1

69

M16

Ø80

10469

105

CFS Frame Support Components - Connecting Element


B mm

C mm Screws Material Colour

CFS14082 CON-A330-M6 CONNECTING ELEMENT PA FOR CWS19048 10 6.2 4.5 M6 PA-FG Black


CFS Frame Support Components - Support Base Cross Joint Bipod

Code Smart Guide Description DF1 Tube Dia mm

DF2 Tube Dia mm Fasteners Colour

CFS15094 VG-BPV-R200T-R125-G BIPOD 120 DEG C/ JOINT 50.9MM SS BOLTS 50.9 42.4 SS304 Black

CFS Frame Support Components - Support Base Tripod

Code Smart Guide Description DF1 Tube Dia mm Fasteners Colour

CFS15086 VG-TP-R200T-S TRIPOD 50.9MM SS BOLTS 50.9 SS304 Black








Ø80

145

85

69

M16

ØD

F1

Ø45

0

Ø49

0

ØD

F2

145

85

ØD

F1

105

Ø45

0

Ø49

0

69

M16

Ø80

104

69


CAF Articulated Feet - D60 ECO Line

Code Smart Guide Description Spindle Newtons M L L2

Material Type N mm mm mm mm CAF176251 LA60E-SM12L155 ART FT D60 M12 S/S L2 90MM ECO SS304 15E 12000 12 9 115 90 CAF176258 LA60E-SM16L145 ART FT D60 M16 S/SL2 110MM ECO SS304 15A 15000 16 13 145 120 CAF176260 LA60E-SM16L205 ART FT D60 M16 S/S L2 180MM ECO SS304 15A 15000 16 13 205 180 CAF171310 RPAD5306 ANTI SLIP PAD D60 Oil resistant rubber, 70 Shore hardness

CAF Articulated Feet - D80 ECO Line


Material Type N mm mm mm mm CAF176362 LA80-02B-SM16L95 ART FT D80 M16 S/S L2 70MM ECO SS304 15A 15000 16 13 95 70 CAF176363 LA80-02B-SM16L145 ART FT D80 M16 S/S L2 120MM ECO SS304 15A 15000 16 13 145 120 CAF176364 LA80-02B-SM16L185 ART FT D80 M16 S/S L2 160MM ECO SS304 15A 15000 16 13 185 160 CAF171312 RPAD7207 ANTI SLIP PAD D80 Oil resistant rubber, 70 Shore hardness


MATERIAL INFORMATIONINOX : Stainless Steel AISI 304.

Base: Reinforced polyamide.



Characteristics: The foot can be fixed to the floor by knocking out the marked plugs on the base.

15

L

M

17

Ø 80

L2

15.5

Ø 54

Ø 8.5

15°

L

M

14

Ø 60

L2


CAF Articulated Feet - D100 Eco Line


Material Type N mm mm mm mm CAF176451 LA100E-02B-SM16L150 ART FT D100 M16 S/S L2 110MM ECO SS304 15A 18000 16 13 150 120 CAF171314 RPAD9308 ANTI SLIP PAD D100 Oil resistant rubber, 70 Shore hardness

CAF Articulated Feet - D120 Eco Line


Material Type N mm mm mm mm CAF176553 LA120E-02B-SM16L210 ART FT D120 M16 S/S L2 180MM ECO SS304 15A 18000 16 13 210 180 CAF176557 LAS80-02B-SM12L100 ART FT D120 M20 S/S L2 190MM ECO SS304 15A 20000 20 16 220 190 CAF171326 RPAD11207 ANTI SLIP PAD D120 Oil resistant rubber, 70 Shore hardness



Characteristics: The foot can be fixed to the floor by knocking out the marked plugs on the base.



Characteristics: The foot can be fixed to the floor by knocking out the marked plugson the base.


15°

L

M

22

Ø 100

L2

19.5

Ø 74

Ø 12.5

15°

L

M

22

Ø 120

L2

19.5

Ø 12.5

Ø 90


CHANGE PARTS - BOTTLING AND PACKAGING

ACCURACY

FAST QUOTES

EXCELLENT LEAD TIMES

MAXIMISED EFFICIENCIES

HIGHEST QUALITY

EXPERIENCE

MACHINE EXPERIENCEDotmar have experience providing components for all major machine suppliers. Whether it be filling lines, high speed packaging or conveyors. The benefits to the customer of all this experience is we provide 100% fitness for purpose first time at competitive pricing without long lead times or excessive down time.

DESIGN AND MANUFACTUREDotmar are able to design and manufacture change parts and components based on customer supplied drawings and samples. Commissioning is always hassle free as a result of our wealth of experience and manufacturing ability.

DOTMAR EXPERIENCEDotmar have been supplying change parts packaging plant components for over 35 years. Over this time we have been able to amass considerable experience relative to individual machines, specific customer needs, packaging and bottling industry guidelines. Many original Dotmar designed and manufactured components are still operating effectively today.

Dotmar’s conveyor products is a range of leading conveyor components, plastic modules, plastic conveyor chain and integrated conveyor solutions from concept to completion. Networking with our business partners and customers we provide solutions utilising the latest generation of innovations across a wide range of industries and applications.


• No size limit• Onsite service to reduce downtime• Accuracy +/- 0.01mm• 3D shapes / curves

• Inhouse conversion to components• Plastics / Metal / Wood

• Obsolete Parts• Prototypes• Copying

Save hours and dollars! Improve Accuracy!

DIGITAL MEASURING SERVICE

CHANGE PARTS - BOTTLING AND PACKAGING

CHANGE PARTS I SCROLLS I CONVEYOR CHAINCONVEYOR COMPONENTS I CAN AND BOTTLE INVERTERS

MACHINED GUARDS I FILLING / LABELLING EQUIPMENT COMPATIBLE

MATERIALS APPLICATIONS

Dotmar only use the highest quality raw materials and conveyor components sourced predominately from Europe to ensure maximum performance without failure in service.


CBH UCFH-R Bearings in Plastic Housing 2 Bolt

Code Smart Guide Description Dia

Caps Open Cap A B C D E F G H J Z T m n U V

Bearing Load Ratings

Housing Load

Rating Max.

Weight

mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic

C(N) Static Co(N) N kg

CBH54204NR-EC UCFH204-20M-CEC

UCFH-R BRG & HSG 2 BOLT FLG 20MM CLOSED

20 50068 114 90 11 29 5 64 M6x 15.5 10 26 34 18 7 47.5 49.5 9850 6580 7500 0.21



25 50069 130 99 11 34 5.5 70 M6x 17 13 29 37 19.5 7.5 52.2 54.2 10800 7800 8000 0.32



30 50052 148 117 11 40.3 6 84 M6x 14.5 13 29 37 22 8 50.7 52.7 15000 11300 8800 0.45



35 50060 163 130 14 48 6.5 90 M8x 18 16 33 42 23.5 8.5 63.7 65.7 19700 15300 9000 0.6

SYSTEM PLAST BEARINGS

TECHNICAL INFORMATION FOR UCFH-R• Resistance to corrosion: - Polyamide version (PA): good resistance to many corrosive chemicals such as water, oils, greases, petrol, milk, wine and alcoholic beverages.• High load capacity• Continuous operating temperature: - All our bearings can be used at temperatures between 0 degrees Celsius and +80 degrees Celsius. For lower or higher temperatures, please consult your Dotmar Sales Representative. • Self-alignment: - Max misalignment between shaft and housing: 2.0 degrees.• Low maintenance and trouble-free operation• Easy cleaning• Ball bearing pre-lubricated with long-life grease, which is ideal in applications in humid conditions, with water, alkaline or acid solutions• Concept and design to meet all safety requirements• Interchangeable with standard cast iron flanged supports• Application in the food, beverage and pharmaceutical industry• Completely sealed units

COMPONENTS

1 Housing in reinforced polyamide (Housing in reinforced polypropylene (Available on request). 2 Adjustable chrome steel or stainless steel ball bearing, pre-lubricated. Can be re-lubricated by means of grease-nipple or a quick coupler.

3 Ball-type grease-nipple or quick coupler from nickel plated brass (available on request) to take semi-rigid hoses diameter 4mm in Rilsan. Version with stainless steel bearing has a stainless steel grease nipple.

4 Clip-on safety cap.

5 Spacers from nickel plated brass to reinforce fixing holes. 6 Polyethylene washer for grease-nipple.

7 Washed UNI6592, stainless steel AISI 304-D 1.4301.

8 Rotary shaft seal ring with extra dust-protection lip in NBR rubber.

9 Heavy duty O-ring in NBR rubber.

Note: Version shown is a standard version.

VERSION


Please order open caps separately. Refer to page 75.



Please order open caps separately. Refer to page 75


CBH UCFL-W Bearings in Plastic Housing 2 Bolt

Code Smart Guide Description Dia Caps Open Cap A B C D E F G H J Z T m n U V


Housing Load

Rating Max.

Weight (Kg)

mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic


CBH50206W UCFLXX206-30M-CEC UCFL-W BRG & HSG 2 BOLT 30MM CLOSED

30 50058 120 90 11 40.3 6 85 M6x 13 19 25 35 22 8 52 54 15000 11300 7000 0.4

CBH UCFA-R Bearings in Plastic Housing 3 Bolt


Caps Open Cap A B C D E F G H L Z J T m n U V


Housing Load

Rating Max.

Weight

mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic


CBH52205FRA

UCFBZ204-20M-CEC

UCFA-R BRG & HSG 3 BOLT 20MM CLOSED

20 50081 125 42 46 29 5 29 M6x 17 69 28 13 35 18 7 49.5 52 9850 6580 9500 0.35

CBH52205FR

UCFB205-25M-CEC


25 50073 125 42 46 34 5.5 29 M6x 16 69 28 13 36 19.5 7.5 52.5 55 10800 7800 9000 0.40

CBH52206FRA

UCFBZ205-25M-CEC


25 50088 141 48 53 34 5.5 32 M6x 18 84 30 13 38 19.5 7.5 56.5 59 10800 7800 10000 0.45

CBH52206FR

UCFB206-30M-CEC


30 50074 141 48 53 40.3 6 32 M6x 17 84 30 13 39 22 8 56.5 59 15000 11300 1000 0.50



Note: Version shown is a standard version.



VERSION


CBH UCFQ-R Bearings in Plastic Housing 4 Bolt


Caps Open Cap

A B C D E G H J Z T m n U V

Bearing Load Ratings Housing

Load Rating Max.

Weight

mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic


CBH50204VR-EC UCFQ204-20M-CEC

UCFQ-R BRG & HSG 4 BOLT 20MM CLOSED 20 50068 86 63.5 11 29 5 M6x 15.5 10 26 33.5 18 7 47.5 49.5 9850 6580 10000 0.23


UCFQ-R BRG & HSG 4 BOLT 25MM CLOSED 25 50069 95 70 11 34 5 M6x 17 12.5 29 36.5 19.5 7.5 52.2 54.2 10800 7800 10800 0.34


UCFQ-R BRG & HSG 4 BOLT 30MM CLOSED 30 50052 108 82.5 11 40.3 6 M6x 14.5 12.5 29 36.5 22 8 50.7 52.7 15000 11300 11500 0.50

CBH50207VR-EC UCFQ207-35M-CE

UCFQ-R BRG & HSG 4 BOLT 35MM CLOSED 35 50060 118 92 14 48 6.5 M8x 18 16 33 41.5 23.5 8.5 63.7 65.7 19700 15300 12000 0.65

CBH UCF-R Bearings in Plastic Housing 4 Bolt

Code Smart Guide Description Dia Caps Open

Cap A B C D E G H J Z T m n U V


Housing Load

Rating Max.

Weight

mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic


CBH50206R - UCF-R BRG & HSG 4 BOLT 30MM OPEN 30 50052 110 83 11 40.3 6 M6x 18 25 31 40 22 8 53 55 15000 11300 13000 0.59




Application: System Plast bearings, guide brackets and flat top chain. Soft drink. Application: System Plast roller guide, bearings, speedset, modular belt. Bottled water.

CBH UCF-R Bearings in Plastic Housing Pillow Block


Caps Fit Open Cap

A B C C1 D E G H H1 L Z J1 J2 T m n U V


Housing Load

Rating Max.

Weight

mm Pn mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Dynamic


CBH53204R

UCP204-20M-CEC

UCP-R PB BRG & HSG 20MM CLOSED

20 50081 31 18 11 17 29 5 M6x 33.3 16 127 67 91 103 36 18 7 51 53 9850 6580 8500 0.30

CBH53205R

UCP205-25M-CEC


25 50073 35 20 11 17 34 5.5 M6x 36.5 16 135 72.5 97 109 39.5 19.5 7.5 55 57 10800 7800 10000 0.37

CBH53206R

UCP206-30M-CEC


30 50074 41 24 13 22 40.3 6 M6x 42.9 22 156 87 111 129 46 22 8 85 67 15000 11300 12000 0.50


CBH Bearing Caps Open

Code Smart Guide Description Type D mm

d mm

H mm

CBH50052 - CAP OPEN 55206VR-EC, 59206NR-EC, 55206R A 80 30 29.5 CBH50055 - CAP OPEN 55208VR-EC, 59208NR-EC A 96 40 40 CBH50058 - CAP OPEN 55206W, 58206AR A 71 30 34.5 CBH50060 - CAP OPEN 55207VR-EC, 59207NR-EC A 87.5 35 40.5 CBH50068 - CAP OPEN 55204VR-EC, 59204NR-EC A 62 20 30 CBH50069 - CAP OPEN 55205VR-EC, 59205NR-EC A 69.5 25 32 CBH50073 - CAP OPEN 58205R, 57205FR B 58.5 25 28 CBH50074 - CAP OPEN 57206FRB, 58206R, 57206FR B 76 30 32 CBH50081 - CAP OPEN 57205FRA, 58204R B 50 20 26.5 CBH50088 - CAP OPEN 57206FRA B 42 17 26


Clip-on Safety Cap (closed version) Components

1 Clip-on safety cap in polypropylene.

2 Heavy duty O-ring in NBR rubber.

Colour • Safety cap in yellow. • For sufficient quantities parts can be produced in different colours or in transparent.

Clip-on Safety Cap (open version) Components

1 Clip-on safety cap in polypropylene.

2 Rotary shaft seal ring with extra dust protection lip in NBR rubber. 3 Heavy duty O-ring in NBR rubber.

Colour • Safety cap in yellow. • For sufficient quantities parts can be produced in different colours or in transparent.

Type A (External)

Type A (External)

Type B (Internal)

Type B (Internal)

CBH Bearing Caps Closed

Code Smart Guide Description Type D mm

H mm

CBH50100 - CAP CLOSED 50206VR-EC, 54206NR-EC A 80 29.5 CBH50101 - CAP CLOSED 54208NR-EC, 50206VR-EC A 96 40 CBH50102 - CAP CLOSED 50206W, 53206AR A 71 34.5 CBH50103 - CAP CLOSED 50207VR-EC, 54207NR-EC A 87.5 40.5 CBH50104 - CAP CLOSED 50204VR-EC, 54204NR-EC A 62 30 CBH50106 - CAP CLOSED 53205R B 58.5 28 CBH50107 - CAP CLOSED 53206R B 76 32 CBH50108 - CAP CLOSED 50205VR-EC, 54205NR-EC A 69.5 32 CBH50109 - CAP CLOSED 52205FRA, 53204R B 50 26.5


FOOD INDUSTRY APPLICATIONS

Dotmar Engineering Plastics is the leading supplier throughout Australia and New Zealand for Food Industry plastics, Commercial Cutting Board Materials and Conveyor Belts. Dotmar prides itself in it’s ability to offer plastic conveyor solutions to the HOT, COLD, WET, DRY areas of food processing.

> REDUCE COSTS > REDUCE LEAD TIMES > INCREASED WEAR LIFE > IMPROVE DESIGN OVER OEM


MMDT POLYSTONE DETECTABLE & HMWPE MICROBLOC FOR THE FOOD INDUSTRY

Food processor face the ever present risk of contamination finding its way into their product. The risk and potential losses can be significant if not detected early.

Dotmar now offers a ground breaking solution to this problem with the introduction of MMDT Polystone Detectable & HMWPE Microbloc.

The unique additives in MMDT Polystone Detectable allow it to be easily traced by standard metal detectors while continuing to provide the outstanding wear-resistance and sliding properties. Designed to replace machines parts made from steel and lower performing plastics, this engineering polymer has high-impact strength, is easily machined and has no moisture absorption.

HMWPE Microbloc special formulation does not contain any toxins but kills microbes, bacteria, viruses, yeast, fungi, mildews and algae, which are on the surface and prevents re-growing.

MMDT Polystone Detectable & HMWPE Microbloc complies with FDA regulations concerning direct contact with food. Every food processor that utilizes metal detectors in their processing or packaging operations can easily realize the advantages of both products.

Applications

• Wear-strips • Sprockets• Chain guides & Tracks • Pillow blocks• Bushing & bearings • Gears• Guides • Scraper blades• Mixer components

NEW PRODUCT

Available as:Rods: 12mm - 200mm I Sheets: 10mm - 100mm I Custom manufacture

Suggested use with the following food products include:

• Frozen & Prepared Foods

• Candies & Chocolates

• Soup & Chili • Snack Foods

• Chips & Tortillas • Cereals

• Cheese • Ice Cream

• Pastries • Pet food

Properties Units MMDT Polystone Detectable

Density g/cm3 0.949

Elongation MPa 320

Wear by sand-slury test Nat. UHMW-100 88

Constant service temp max 0C 82

The values indicated result from numerous measurements for an approximation of the values and are to our best knowledge. They serve as information about our products and are presented as guide to choose from a range of materials. This however, does not include an assurance of specific properties or the suitability for particular application purposes that are legally binding. Since the properties also depend on the dimension of the semi-finished products and the degree of crystallization (e.g. nucleating by pigments), the actual values of the properties of a particular product may differ from indicated values.


CHEMSTIK®

Dotmar Heatbelts is the PTFE coated fabric and process conveyor belt manufacturing arm of Dotmar EPP Pty Ltd, Australasia’s leading supplier of semi-finished and machined engineering plastic shapes. With 8 branches and an established network of partner re-sellers throughout Australia & New Zealand. Dotmar is able to offer unrivalled service and support in this specialised field.

Our extensive range of coated fabrics is sourced from Saint-Gobain Performance Plastics, the largest and most technically advanced manufacturer of fluoropolymer coated fabrics in the world. Their Chemfab® brand name is synonymous with quality and reliability.

DOTMAR HEATBELTS PROPERTIES CHART AND DELIVERY PROGRAM

CHEMSTIK® PTFE COATED GLASSCLOTH WITH PRESSURE SENSITIVE SILICONE ADHESIVEContinuous operating temperature: -70°C to 260°C

CHEMSTIK® PREMIUM SERIES CHEMSTIK® INDUSTRIAL SERIES CHEMSTIK® CONDUCTIVE SERIES03 T Premium 03 T Industrial 05 T Premium Cond05 T Premium 05 T Industrial06 T Premium 06 T Industrial GXS210 - 2 Premium 210 - 1 Industrial 14 T IndustrialCHEMSTIK® SPSA: Skived PTFE Film with Silicone Pressure Sensitive Adhesive One Side Adhesive thickness = 0.06mmSPSA - 5 T 0.130 280SPSA - 10 T 0.250 540SPSA - 20 T 0.500 1080

PRODUCT RANGE• Chemstik® Pressure Sensitive Adhesive Coated fabrics and Tapes• Chemstik® Zone and Heatsealer Tapes• Chemsil® Silicone Coated Glass fabrics

SPECIALITY RANGE• Chemstik® SPSA skived PTFE Tape with Silicone Pressure Sensitive Adhesive• Chemstik® EXTRUDED PTFE Tapes with Pressure Sensitive Adhesive


EUROBELT


S-20

C-12

FLAT TOP FLAT

FLUSH GRID 32% OPEN AREA RAISED RIB 32% OPEN AREA FRICTION TOP NONSLIP TRAIN NON STICK SLIDING ROLLERS SLIDING

S-A24

S-30

FLAT TOP FLAT PERFORATED FLAT TOP 17% OPEN AREA

FLAT TOP FLAT

FLUSH GRID 41% OPEN AREA RAISED RIB 41% OPEN AREA SLIDING ROLLERS SLIDING

S-31 S-32

LATERAL TRANSFER 152.4mm FLAT TOP 82.5-114.3-152.4-190.5mm

FLAT TOP FLAT FLUSH GRID 14% OPEN AREA NON SLIP NONSLIP SLIDING ROLLERS SLIDING

S-41

RAISED RIB 25% OPEN AREA

FLAT TOP FLUSH GRID

S-50

FLAT TOP FLATPERFORATED FLAT TOP 18% OPEN AREA

FLUSH GRID 40% OPEN AREA OPEN GRID 40% OPEN AREA FRICTION TOP NONSLIP

CONIC FRICTION NONSLIP KNURLED NONSTICK CONIC NONSLIP SLIDING ROLLERS SLIDING

S-80

FLAT TOP FLAT PERFORATED FLAT TOP24% OPEN AREA

S-93

FLUSH GRID S/L47% OPEN AREA

FLUSH GRID C/L47% OPEN AREA

CONIC FRICTION NON SLIP CONIC NON SLIP SLIDING ROLLERS SLIDING

S-40

S-B50

FLAT TOP FLAT


CHAIN / BELT SELECTION CHECK LIST

CHAINBrand Name:

Series:Check also program review on other worksheet.

Straight Running Side Flexing [yes/no] GripperBevel Base Chain PitchTab Plate MaterialMagnet Gripper Style

OtherWidth of Hinge [mm]Width of Plate [mm]Thickness of Plate [mm]

Pitch [mm]Material: [Stainless/Plastic/LF/AR/PP/Other]:

MULTIFLEX Sketch:Pitch [mm]Thickness [mm]TAB [yes/no]

BELTBrand Name:Series:Pitch [mm]Straight/Side Flexing?Pitch of Modules [mm]Thickness [mm]Width of the Belt [mm]

Type of Belt yes/noFlat Top

Flush GridPerforated Top

LBPRubber Top

Other

Positioners:P1P2P2BP2BD

For Side Flexing:Inside RadiusTAB? [specify]

5

63.55

63.55

5

63.55

5

5

63.55

42.121.45

5

63.55

42.121.45

63.55

42.1

5

21.45

Positioner Options:

P1

P2

P2B

P2BD


CURVES SELECTION CHECK LIST

Curve Options:

Chain Style:BevelTABMagneticOther

Centre Radius R: [mm]Angle 0

Basic Width W [mm]Other [mm]In feed Lin [mm]Out feed Lout [mm]Thickness Top Part T [mm]Thickness Return Part H [mm]

For Multi- Track:Pitch of Tracks T [mm]Total Width H [mm]

CURVES

Further info/sketch:

ab:

Magnetic:

Bevel

Tab

Magnetic

H

TW


SPROCKET / IDLER SELECTION CHECK LIST

Chain - Belt type:(If not sure, check Chain-Belt worksheet for Chain/Belt selection)

Moulded/Machined:Number of Teeth:Width:Shaft Diameter:Split or One-piece:Outside Diameter:

Chain - Belt type:

With Teeth:Number of TeethWidth (on teeth)Split or One-piece

Without Teeth:Outside DiameterWidth (between sides)Split or One-piece

Shaft Diameter

SPROCKETS

IDLERS

Further info/remarks:

Solid Machined

Idler with teeth

Idler without teeth

Moulded

Further info/remarks:


BEARING SELECTION CHECK LIST

Shaft Diameter: [mm]

Maintenance Free Bearings: [yes/no]

Safety cap or Sealed cap?

Open cap or Closed cap?

TYPE:

4 Hole Square

4 Hole Round

2 Holes

Standing

Other

Circle the right options on this page

UCF (-R; -RL)

UCFL (-W)

UCFA (-R)

UCP (-R)

UCFC (-Y)

UCFQ (-R; -RL)

UCFH (-R; -RL)

UCT (-R)

CS (-R; -RL)

UCFT

UCHE (-R)

Please make dimensional sketch below.

SQL

US (-R)

CL (-R; -RL)

UCHA (-R) SFL (-Z)

F

UFL (-Z)

UCFG (-R)

UCPA (-R)

FC

[mm]

A=

B=

C=

[mm]

A=

B=

C=

F=

[mm]

A=

B=

C=

F=

J=

L=

C=

H=

Z=

A=

C=

C1=

L=

H=

Z=

Material: Black Polyamide Poly Propylene Nolu-Clean

Further info/remarks: Include picture when possible.


LEVELLERS SELECTION CHECK LIST

TYPE:

OTHER:

SPINDLE TYPE:

MAIN DIMENSIONS:

Circle the right type

Fixed spindles

(without anti slip pad)

(with anti slip pad)

Metal base

SPINDLE TYPE

Ø 24.5 mm

Type1C

Ø 19 mm

Type2B

Ø 24.5 mm

Type2C

Ø 24.5 mm

Type3C

Ø 24.5 mm

Type11C

I

D

H

M

L

L2

Ø

SW.

Ø A = [mm]Ø B = [mm]Ø C = [mm] D = [mm]

M = [mm]L = [mm]L1 = [mm]L2 = [mm]

Further info/remarks: Include picture when possible.


TECHNICAL INFORMATION Tolerances and Dimension

Tolerance for “ plus” sprockets

DF b t

SPLIT SPROCKETS

STANDARD SPROCKETS

STANDARD AND SPLIT IDLER WHEELS

t

(+25) mm (+15) mm

(+0.3) mm (+0.2) mm

(+0.3) mm (+0.2) mm

DF mm b mm t mm

nominal tolerance nominal tolerance nominal tolerance

20 6 22.8

25 8 28.3

30 8 33.3

35 10 38.3

40 12 43.3

45 14 48.8

50 14 53.8

DF mm

nominal tolerance

20.5 ± 0.1

25.5 ± 0.1

30.5 ± 0.1

35.5 ± 0.1

40.5 ± 0.1

45.5 ± 0.1

50.5 ± 0.1

H7 (+0.021) 0

H7 (+0.021) 0

H7 (+0.021) 0

H7 (+0.025) 0

H7 (+0.025) 0

H7 (+0.025) 0

H7 (+0.025) 0

D10 ( -0.078 ) -0.030

D10 ( -0.098 ) -0.040

D10 ( -0.098 ) -0.040

D10 ( -0.098 ) -0.040

D10 ( -0.120 ) -0.050

D10 ( -0.120 ) -0.050

D10 ( -0.120 ) -0.050

+0.1 0+0.2 0+0.2 0

+0.2 0

+0.2 0

+0.2 0

+0.2 0

DF mm b mm t mm

nominal tolerance nominal tolerance nominal tolerance

20 6 22.8

25 8 28.3

30 8 33.3

35 10 38.3

40 12 43.3

45 14 48.8

50 14 53.8

P9 ( -0.022 ) -0.074

P9 ( -0.022 ) -0.074

P9 ( -0.022 ) -0.074

P9 ( -0.026 ) -0.088

P9 ( -0.026 ) -0.088

P9 ( -0.026 ) -0.088

P9 ( -0.026 ) -0.088

P9 ( -0.012 ) -0.042

P9 ( -0.015 ) -0.051

P9 ( -0.015 ) -0.051

P9 ( -0.015 ) -0.051

P9 ( -0.018 ) -0.061

P9 ( -0.018 ) -0.061

P9 ( -0.018 ) -0.061

+0.1 0+0.2 0+0.2 0

+0.2 0

+0.2 0

+0.2 0

+0.2 0

UNI 6604 - 69 /ISO 773 - DIN 6885

UNI 6604 - 69 /ISO 773 - DIN 6885


CONVEYOR CONSTRUCTION CALCULATION

[mm or inch]

[g] [mm]

[m/min]

[teeth]

[mm] [%] [mm] [%] [%] [°C] 1 2 3 4 5 6 7 8 9 10

Chain/belt and material specification

Chain/belt type Chain/belt width Curve material Material straight upper part Material straight return part Product material

Product details and conveyor specification

Products/hour Product weight Diameter product Product arrangement Product pitch Chain speed Lubrication Number of tracks Sprocket size Start up frequency

Conveyor layout from idler to drive

Section type Length Angle Radius Accumulation1 Occupation2 Temperature

Required data for chain/belt calculation:

Required operation dataPlease add a sketch of the conveyor layout.Please describe operation conditions (e.g. abrasive conditions, chemicals environmental conditions, special operation requirements) in detail.Please describe product features in detail, add drawings/sketches.

Replacement of chain/beltsWhich chain was used before?Did it work satisfactory or did problems occur?

Calculation program

1 Time percentage2 Part of the conveyor in accumulation

To download SPEC go to: http://www.regalpts s/system-plast/Pages/systemplast.aspx and Select S.P.E.C.


TROUBLE SHOOTING

Possible Causes Remedy

Chain/belt is elongated e.g. due towear or overloading.

Replace chain/belt and sprocket.Check other components as well.

Improper catenary sag Check dimensions and adjust.

Sprocket worn Replace sprocket.

Wrong sprocket type Install correct sprocket.

Misaligned sprocket Check and adjust.

Improper sprocket position Check and adjust position.

CHAIN/BELT JUMPS ON SPROCKET OR DOES NOT RELEASE WELL

SLIP STICK OPERATION


Slip stick Use lubrication.Reduce chain/belt tension by shortening the conveyor.

Return roller diameter too small Install larger rollers.

Chain/belt catches the conveyor Remove obstructions.Check return part as well.

DAMAGED CHAIN HINGES


Overloading Replace chain/belt.

Blocking and obstructions Check the complete conveyor

Exceeding the minimum backflex radius Check conveyor construction.

ELONGATION


Overloading Replace chain/belt.Check sprockets and other components as well.

Wear from dirt in hinges Improve cleaning

RAPID CURVE WEAR


Overheating Use EXTRA curve

Embedded abrasives Replacement

CHAIN DRIFTS SIDEWAYS ON SPROCKET


Bad shaft/sprocket alignment Adjust or use collars

Conveyors are not level Adjust

www.dotmar.co.nz I 0800 650 750 I [email protected]

AUCKLAND CHRISTCHURCH PALMERSTON NORTH 28 Crooks Road, East Tamaki, 111 Wrights Road, Middleton 10 Bennett Street, CloverleaAuckland, New Zealand Christchurch, New Zealand Palmerston North, New ZealandP: +64 (09) 579 8300 P: +64 (03) 338 0525 P: +64 (06) 354 4250F: +64 (09) 579 7200 F: +64 (03) 338 0522 F: +64 (06) 354 4228E: [email protected] E: [email protected] E: [email protected]

Dotmar, through its strong network of International and Australian Engineering Partners, stays at the “leading edge” of product and technology in its field.

Dotmar is focussed on three key areas of the business…

MaterialDistribution

ApplicationDevelopment

Custom Manufacturing & Engineering

Disclaimer:Full range of System Plast products are available upon request.Stock levels will vary by branch.

Competence in Plastics

F L U O R O P A C I F I CSpecialist PTFE & PEEK Processors

Fluoro Polymer Engineers

http://www.dotmar.co.nz

mailto:aksales%40dotmar.co.nz?subject=

mailto:chsales%40dotmar.co.nz?subject=

mailto:pnsales%40dotmar.co.nz?subject=

conveyor products catalogue - dotmar.co.nz components cws wear strips 31 ... lower load and lower...

Documents