pc 2014-1 premium micro hammer mill - 4.imimg.com · premium micro hammer mill is designed to give...
TRANSCRIPT
PREMIUM
MICRO HAMMER MILL
Popular Applications
Alfafa hay alum, Alginate, besan, Ashes, Bakelite sodium, Bakelite, Beans, Cake cotton, Carbon powder, Casein, Ceramic powder
Chemical & dyeChillyCoalCoffee, CorrienderCuminDried blood, Epsom salts, Feed (all), Fish scrap,
Premium Micro Hammer Mill is designed to give more Fine grinding having close tolerances, high speed and 'C' Type hammers compare to Conventional/ Hammer Mills.Pulveriser is having separate speed with a separate shaft and driring arrangement to select the speed of Blower with Common Motor.Pulveriser having In‐Built conveying system cyclone collector, rotary air valve and fabric type dust collector to make complete system having Grinding, Sieving and Collection in one single unit.Ideal for Medium Fineness compare to conventional hammer mills.Ideal for Medium Fineness compare to conventional hammer mills.M.O.C, M.S., S.S lining and S.S. complete.Available in Three size i.e. Minor (10 hp) Adult (25 hp) and Major (60 hp).
SALIENT FEATURES
GelatineHerbsOyster shellsRootsSaltSaw dustSea foodSugerTeaTobacco
PC 2014-1
PREMIUM MICRO HAMMER MILL
TECHNICAL SPECIFICATIONS
2009, Phase IV, G.I.D.C., Industrial Estate, Vatva, Ahmedabad - 382 445. INDIAPhone: 079-25894693, 25832541.E-mail: [email protected] / [email protected] us: www.premiumpulverisers.com / www.premiumpulman.com
PULMAN PVT LTD
MODEL JR-MHM MED-MHM STD-MHM
ROTOR DIA
SPEED RPM
HP. MILL
HP. BLOWER
300
5000
10 - 20
400
4000
25 - 30
600
3000
60 - 100
Premium Micro Hammer Mill is fusion of Micro Pulveriser and Miracle Mill ( Star Hammer Mill.)
These mills are available in THREE Types, and models Positive Pressure System (PPS)with Blower and Negative Pressure System (NPS). 1) Bottom Open Type (BOT) 2) Co‐axial Blower Type (CAB) ‐ PPS & NPS 3)Non‐axial Blower Type (NAB) ‐ PPS & NPS
There are THREE Models is (1) Minor, (2) Adult, (3) Major. These models have Rotor Diameter
of 300mm, 450mm and 600mm. Each model have a Rotor having Grinding Element of “π” Shape. These hammers are in C.S & S.S depending upon applications. There Mills have Fabricated body and can be provided in M.S, S.S Lining and complete S.S. construction.
BOT type mills are installed on Fabricated Stand. The screen in lower half of the body is fitted in semi circular shape and perforations of screen decide the FINENESS of end product.
CAB model have Co‐axial Blower on the Main Rotor Shaft and have cyclone Collector, Fabric Type Dust Collector with Piping convey pneumatically. The Rotary Air Lock Valve is provided at the out let of Cyclone Collector to facilitate the dust free collection.
Micro Hammer Mills are provided with co‐axial blower or separate blower for materiel take away and Positive or Negative Pressure system.
Non Axial Blower type mills are provided with separate motor or separate transmission from main mill drive and Positive or Negative Pressure system.
The feeding arrangement is manual for small mills and mechanized arrangement is suggested for Big Mills.
M.O.C. is either C.S or S.S contact parts or S.S.
5 - 7 10 - 15 15 - 25