partek pfa/ptfe valvesparkerstorethailand.com/pdf/pfa_ptfe/4182_a00.pdf · partek operation tucson,...

ParParParParPartektektektektekPFA/PTFE Valves

Catalog 4182/USAMarch 2005

http://oem.cadregister.com/asp/PPoW_Entry.asp?language=GB&company=74127309&elementID=74127309/VALV/

http://www.parker.com/EAD/displayCatalog.asp?menu_parkerid=46&menu_gid=15&menu_divid=16&catid=67186&Products=changed

Parker Hannifin CorporationPartek OperationTucson, AZ

Table of Contents

Technical Information ........................................................................................................................................ 3

Manual ValvesMV-1 Manual PTFE Stop Cock Valve .................................................................................................. 4MV-6 Manual PTFE Ball Valve ............................................................................................................. 6MV-8 Manual PTFE Sampling Valve .................................................................................................... 8MV-10 1/4” Manual PFA 2 Way Valve ..................................................................................................... 10MV-10 1/4” Manual PFA 3 Way Valve ..................................................................................................... 12MV-11 1/2” Manual PFA 2 Way Valve ..................................................................................................... 14MV-11 1/2” Manual PFA 3 Way Valve ..................................................................................................... 16MV-11 1/2” Manual PFA 2 Way Adjustable Valve ................................................................................... 18MV-12 1” Manual PFA 2 Way Valve ........................................................................................................ 20MV-13 Manual PFA Needle Valve .......................................................................................................... 22MV-14 Manual PFA Stop Cock Valve.................................................................................................... 24MV-16 3/4” Manual PFA 2 Way Valve ..................................................................................................... 26MV-16 3/4” Manual PFA 3 Way Valve ..................................................................................................... 28MV-16 3/4” Manual PFA Sampling Valve ................................................................................................ 30

Pneumatic ValvesPV-1 Miniature Pneumatic PTFE Valve .............................................................................................. 32PV-10 1/4” Pneumatic PFA 2 Way Valve................................................................................................ 34PV-10 1/4” Pneumatic PFA 3 Way Valve................................................................................................ 36PV-11 1/2” Pneumatic PFA 2 Way Valve................................................................................................ 38PV-11 1/2” Pneumatic PFA 3 Way Valve................................................................................................ 40PV-11 1/2” Pneumatic PFA 2 Way Adj. Bypass Valve ............................................................................ 42PV-12 1” Pneumatic PFA 2 Way Valve .................................................................................................. 44PV-16 3/4” Pneumatic PFA 2 Way Valve................................................................................................ 46PV-16 3/4” Pneumatic PFA 3 Way Valve................................................................................................ 48PV-16 3/4” Pneumatic PFA Sampling Valve .......................................................................................... 50

Other ValvesCV-1 1/4” - 1” PTFE Check Valve ........................................................................................................ 52RV 1/4” Relief Valve.......................................................................................................................... 54SV-2 1/4” Solenoid Valve ..................................................................................................................... 56

Offer of Sale ........................................................................................................................................................ 58

©©©©© Copyright 2003, Parker Hannifin Corporation, All Rights Reserved

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONALINJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation byusers having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current productcatalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making thefinal selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporationand its subsidiaries at any time without notice.

WARNING




3

OverviewPartek produces products that are made from only the finest Fuoropolymers available. These Fluoropolymers areresistant to numerous chemicals and solvents. This information provides only a brief technical overview . For morecomprehensive technical and chemical compatibility information, please ask for Technical Bulletin 0002-T1/USA.

Fluorinated PolymersChemical Properties Electrical Properties Mechanical Properties• Resistivity to corrosive agents • Low dielectric constant • Flexibility at low temperatures• Non-solubility • Low dissipation factor • Low coefficient of friction• Long term weatherability • High arc resistance • Stability at high temperatures• Non-adhesiveness • High surface resistance• Nonflammability • High volume resistivity

PTFE is a fluorocarbon resin that is isostatically compression molded into various shapes and configurations. It ischemically resistant to all chemicals and solvents with the exception of some molten alkali metals, molten sodiumhydroxide, elemental fluorine and certain fluorinating agents. At Partek we use PTFE for machining the bodies andcomponents of various valves and manifolds. It offers chemical resistance and stability at high temperatures.

Modified PTFE material is used primarily for diaphragms and bellows in our products. This material has the sameprocessing and chemically resistant characteristics as the standard product but offers superior cycle life andintegrity in diaphragm products.

PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether. The resultant polymer contains the car-bon-fluorine backbone chain typical of PTFE, but unlike PTFE, does not require special fabricating techniques.PFA pellets have good melt flow characteristics that allow for processing via extrusion, compression, blow, transferand injection molding methods. It has outstanding chemical and solvent resistant characteristics over a tempera-ture range even greater than PTFE. PFA is offered in various grades of purity and cleanliness making it the mate-rial of choice for the semiconductor market.

Cv and Kv Formulas

SGP

Q = Kv

Q = Cv

YP

P = Pressure Drop (PSIG)

SG = Specific Gravity

Q = Flow (GPM)

P = Pressure Drop (BAR)

Y = Specific Gravity (kg/cm3)

Q = Flow (LPM)

1 Kv = 14.26 Cv

“CV” flow factor is the number of gallons of fluid that pass

through a given orifice area in one minute, at a pressuredrop of 1 PSIG.

“KV” flow factor is the number of liters of fluid that pass

through a given orifice area in one minute, at a pressuredrop of 1 bar.

For operation at temperatures above ambient conditions,please refer to the chart above for reduced pressure ratings.

PERCENT OF RATED PRESSURE VS. TEMPERATURE

204˚C14593+38-51 -18

100

90

80

40

60

70

50

30

20

0

PER

CEN

T O

F R

ATE

D O

PER

ATI

NG

PR

ESSU

RE

OPERATING TEMPERATURE

10

400˚F300200+100-60

Technical Information




4

Product OverviewThe MV-1 PTFE Stop Cock Valve is designed for use inhigh purity semiconductor fluid applications, and is alsoideally suited for ultra-pure water and aggressivechemicals. A precision-machined PTFE body with astraight through flowpath is combined with a PTFE fullflow orifice stem for maximum flow, minimum pressuredrop and 1/4” turn operation. The MV-1 is offered for inlineand panel mounted applications.

FeaturesFull flow orifice.

The precision machinedstem and body providetight shut off and 1/4turn operation.

Parofluor O-Ring stemseals.

BenefitsMaximum flow at thedesired size.

Minimum pressure drop.High cycle life.

Positive body to stemseal.

SpecificationsMaterials of ConstructionWetted: PTFE, Parker ParofluorTM

Non-wetted: HDPE, PFA, PVC, PVDF, Titanate

Pressure Ranges0 to 60 PSIG (4.1 bar)

Pressure ranges for operation at ambient temperatures. Foruse at higher temperatures consult Pressure/Temperature charton page 3.

Temperature RangesAmbient: -60° - 212° F (-51° - 100° C)

Fluid: -60° - 400° F (-51° - 204° C)

MV-1 Manual Stop Cock Valve




5

MV-1 Manual Stop Cock Valve

Parflare model numbers are supplied with PVDF nuts. For PFA nuts add -T to model number.

BRACKETED DIMENSIONSARE IN mm.

PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 2

5

4

10

6

15

8

20

10

25

12

30

.34

.69

1.03

1.38

1.72

2.077.6 15.1 22.7 30.3 37.9 45.4

.125 Orifice

.188 Orifice

.250 Orifice

.313 Orifice

.375 Orifice

.438 Orifice

4141-1-VM 59.1 8.72 052. YAW2 TPNF"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4241-1-VM 59.1 8.72 052. LYAW3 TPNF"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4341-1-VM 59.1 8.72 052. TYAW3 TPNF"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4126-1-VM 63. 1.5 521. YAW2 eralfraP"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4226-1-VM 63. 1.5 521. LYAW3 eralfraP"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4326-1-VM 63. 1.5 521. TYAW3 eralfraP"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.6161-1-VM 00.3 8.24 573. YAW2 TPNF"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.6261-1-VM 00.3 8.24 573. LYAW3 TPNF"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.6361-1-VM 00.3 8.24 573. TYAW3 TPNF"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.6146-1-VM 59.1 8.72 052. YAW2 eralfraP"8/3 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.6246-1-VM 59.1 8.72 052. LYAW3 eralfraP"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.6346-1-VM 59.1 8.72 052. TYAW3 eralfraP"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8181-1-VM 55.6 4.39 834. YAW2 TPNF"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8281-1-VM 55.6 4.39 834. LYAW3 TPNF"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8381-1-VM 55.6 4.39 834. TYAW3 TPNF"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8166-1-VM 00.3 8.24 573. YAW2 eralfraP"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8266-1-VM 05.2 7.53 313. LYAW3 eralfraP"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.[02.Ø ]85.63[44.1Ø ]42.51[06.8366-1-VM 05.2 7.53 313. TYAW3 eralfraP"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.[02.Ø ]85.63[44.1Ø ]42.51[06.

1.15 [29.21]

1.23 [31.24]

3/8" PARFLARE

1/4" PARFLARE 1/4" FNPT

.50 [12.70]

3/8" FNPT

.50 [12.70]

1/2" FNPT

.63 [16.00]

E(HEX)

D (MAX.)

Ø 2.92 [74.17]

2X

3 WAY 3 WAY2 WAY

STEM TOP

A

B

C (SQ.)

PATTERN

GH

2X

PANEL MTG. HOLE

F2X

H

L T1/2" PARFLARE

1.35 [34.29]

ledoMrebmuN

vC vK ecifirOwolF

.gifnoCtroP

.gifnoC]mm[nisnoisnemiD

A B C D E F G H




6

FeaturesFloating ball designwithout o-rings ensuresbubble tight sealing athigh pressure.

Full port design; 1/4 turnoperation with lowtorque tee handle.

Panel mounting is anoption on all sizes.

BenefitsBidirectional flow to 120psi liquid or gas; Highcycle life.

Ideal for quick shut-offin contamination-freeapplications.

Ideal for processinstrumentationapplications.

Product OverviewThe MV-6 PTFE Ball Valves are designed for use in highpurity semiconductor applications, and are also ideallysuited for use in ultra-pure water and aggressivechemicals. All sizes have wetted parts made entirely ofPTFE. All valves are designed full port for minimal flowrestrictions and are operated 1/4 turn with minimal torque.

SpecificationsMaterials of ConstructionWetted: PTFENon-wetted: HDPE, PVDF and PVC

Pressure Ranges25” HG vacuum (846 mbar) to 120 PSIG (8.3 bar)


Temperature RangesAmbient: -60° - 176° F (-51° - 80° C)

Fluid: -60° - 400° F (-51° - 204° C)

MV-6 Manual Ball Valve




7

ØD

E

A

B

C

MV-6 Manual Ball Valve


FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

1

20

2

30

3

40

4

50

5

60

6

.07

.14

.21

.28

.35

.4138 76 113 151 189 227

1/4" FNPT1/2" FNPT 1" FNPT


rebmuNledoM vC vK .gifnoCwolF .gifnoCtroP]mm[nisnoisnemiD

A B C D E

0-4141-6-VM 88.1 18.62

FFO/NO

TPNF"4/1 ]49.34[37.1 ]67.61[66. ]19.37[19.2 ]92.05[89.1Ø ]72.33[13.1

0-8181-6-VM 95.6 79.39 TPNF"2/1 ]98.65[42.2 ]06.22[98. ]94.49[27.3 ]80.96[27.2Ø ]08.05[00.2

0-611611-6-VM 60.82 41.004 TPNF"1 ]77.08[81.3 ]03.53[93.1 ]00.721[00.5 ]67.111[04.4Ø ]62.46[35.2




8

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE, providesover five times the flex-ural life as compared toconventional PTFE.

Full flow through port.

Purge port option.

BenefitsHigher cycle life result-ing in less downtimeand lower replacementcosts.

Reduced pressure drop.

Allows system mainte-nance downstream ofvalve without disruptingmain flow.

SpecificationsMaterials of ConstructionWetted: PTFE, Modified PTFENon-wetted: PVDF

Pressure Ranges27” HG vacuum (913 mbar) to 120 PSIG (8.3 bar)


Temperature RangesAmbient: 0° - 212° F (17° -100° C)

Fluid: 0° - 400° F (17° - 204° C)

Product OverviewThe MV-8 PTFE Sampling Valve is designed for use inhigh purity semiconductor applications, and is also ide-ally suited for ultra-pure water or aggressive chemicals.The design utilizes a machined PTFE body with preci-sion machined seat and diaphragm sealing areas. A onepiece machined modified PTFE diaphragm is also uti-lized for excellent flexibility and life. The valve incorpo-rates a full flow through port with a low dead volume downleg. The purge port option makes this the valve of choicefor valve manifold boxes and distribution systems.

MV-8 Manual Sampling Valve




9

Parflare model numbers are supplied with PVDF nuts. For PFA nuts add -T to model number.

MV-8 Manual Sampling Valve

STYLE 2

I

D

HF

A1

B

SE

B1C

BE

B1C1C1CE

I

D STYLE 1

P

SIZE)PURGE

N

STYLE 4

I

D

HF

A1

B

A

PO EN

B1C

BGE

B1C1

I

D

STYLE 3

F

A

A1

H

K K1

C1

GE

B1 J1

rebmuNledoMtroPhguorhT troPgnilpmaS troPegruP

troPhguorhT troPgnilpmaS troPegruPvC vK vC vK vC vK

1-4866-8-VM 2.3 7.54 2. 8.2 A/N A/N eralfraP"2/1 eralfraP"4/1 A/N1-212166-8-VM 0.31 6.581 6.4 7.56 A/N A/N eralfraP"4/3 eralfraP"4/3 A/N1-82166-8-VM 0.31 6.581 3.2 8.23 A/N A/N eralfraP"4/3 eralfraP"2/1 A/N1-46166-8-VM 3.73 6.235 2. 8.2 A/N A/N eralfraP"1 eralfraP"4/1 A/N1-616166-8-VM 3.73 6.235 2.7 8.201 A/N A/N eralfraP"1 eralfraP"1 A/N10-1-82166-8-VM 0.31 6.581 3.2 8.23 2. 8.2 eralfraP"4/3 eralfraP"2/1 eralfraP"4/150-1-82166-8-VM 0.31 6.581 3.2 8.23 1.1 7.51 eralfraP"4/3 eralfraP"2/1 eralfraP"2/110-1-212166-8-VM 0.31 6.581 6.4 7.56 2. 8.2 eralfraP"4/3 eralfraP"4/3 eralfraP"4/1

10-1-86166-8-VM 3.73 6.235 3.2 8.23 1.1 7.51 eralfraP"1 eralfraP"2/1 eralfraP"2/110-1-216166-8-VM 3.73 6.235 6.4 7.56 2. 8.2 eralfraP"1 eralfraP"4/3 eralfraP"4/110-1-616166-8-VM 3.73 6.235 2.7 8.201 2. 8.2 eralfraP"1 eralfraP"1 eralfraP"4/1

)ni(SNOISNEMID

ELYTS A 1A B 1B C 1C D E F G H I J 1J K 1K N P Q

-VM 1-4866-8 1 05.1 - "2/1 53.1 "4/1 51.1 65. 05.1 - - - 75.2

1-212166-8-VM 2 05.3 26.4 "4/3 64.1 "4/3 64.1 00.1 05.3 21.4 00.3 662.Ø 15.4

1-82166-8-VM 2 00.3 21.4 "4/3 64.1 "2/1 53.1 00.1 00.3 26.3 05.2 662.Ø 15.4

1-46166-8-VM 2 00.3 21.4 "1 08.1 "4/1 51.1 00.1 00.3 26.3 05.2 662.Ø 15.4

1-616166-8-VM 3 05.3 21.4 "1 08.1 "1 08.1 00.1 05.3 21.4 00.3 662.Ø 36.4

10-1-82166-8-VM 4 05.4 05.5 '2/1 53.1 "4/3 64.1 57. 05.2 31.5 00.2 662.Ø 05.4 "4/1 51.1 "4/3 64.1 57. "4/1 57.

50-1-82166-8-VM 4 36.4 57.5 '2/1 53.1 "4/3 64.1 57. 05.2 73.5 00.2 662.Ø 05.4 "2/1 53.1 "4/3 64.1 88. "2/1 29.

10-1-212166-8-VM 4 05.4 05.5 "4/3 64.1 "4/3 64.1 57. 05.2 31.5 00.2 662.Ø 05.4 "4/1 51.1 "4/3 64.1 57. "4/1 57.

10-1-86166-8-VM 4 36.4 57.5 "2/1 53.1 "1 08.1 57. 00.3 73.5 00.2 662.Ø 06.4 "2/1 53.1 "1 08.1 88. "2/1 29.

10-1-216166-8-VM 4 05.4 05.5 "4/3 64.1 "1 08.1 39. 00.3 31.5 40.2 662.Ø 06.4 "4/1 51.1 "1 08.1 57. "4/1 39.

10-1-616166-8-VM 4 05.4 05.5 "1 08.1 "1 08.1 39. 00.3 31.5 45.2 662.Ø 06.4 "4/1 51.1 "1 08.1 57. "4/1 39.

)mm(SNOISNEMID

ELYTS A 1A B 1B C 1C D E F G H I J 1J K 1K N P Q

-VM 1-4866-8 1 1.83 - "2/1 3.43 "4/1 2.92 2.41 1.83 - - - 3.56

1-212166-8-VM 2 9.88 3.711 "4/3 1.73 "4/3 1.73 4.52 9.88 6.401 2.67 67.6Ø 6.411

1-82166-8-VM 2 2.67 6.401 "4/3 1.73 "2/1 3.43 4.52 2.67 9.19 5.36 67.6Ø 6.411

1-46166-8-VM 2 2.67 6.401 "1 7.54 "4/1 2.92 4.52 2.67 9.19 5.36 67.6Ø 6.411

1-616166-8-VM 3 9.88 6.401 "1 7.54 "1 7.54 4.52 9.88 6.401 2.67 67.6Ø 6.711

10-1-82166-8-VM 4 3.411 7.931 '2/1 3.43 "4/3 1.73 1.91 5.36 3.031 8.05 67.6Ø 3.411 "4/1 2.92 "4/3 1.73 1.91 "4/1 1.91

50-1-82166-8-VM 4 6.711 0.641 '2/1 3.43 "4/3 1.73 1.91 5.36 4.631 8.05 67.6Ø 3.411 "2/1 3.43 "4/3 1.73 4.22 "2/1 4.32

10-1-212166-8-VM 4 3.411 7.931 "4/3 1.73 "4/3 1.73 1.91 5.36 3.031 8.05 67.6Ø 3.411 "4/1 2.92 "4/3 1.73 1.91 "4/1 1.91

10-1-86166-8-VM 4 6.711 0.641 "2/1 3.43 "1 7.54 1.91 2.67 4.631 8.05 67.6Ø 8.611 "2/1 3.43 "1 7.54 4.22 "2/1 1.91

10-1-216166-8-VM 4 3.411 7.931 "4/3 1.73 "1 7.54 6.32 2.67 3.031 8.15 67.6Ø 8.611 "4/1 2.92 "1 7.54 1.91 "4/1 6.32

10-1-616166-8-VM 4 3.411 7.931 "1 7.54 "1 7.54 6.32 2.67 3.031 5.46 67.6Ø 8.611 "4/1 2.92 "1 7.54 1.91 "4/1 6.32




10

FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.

PVDF coated stainlesssteel spring.

Quarter turn operationwith removable handlefor tamper resistance.

BenefitsHigh cycle life.

Lower replacementcosts.

Less downtime.

Reduces effects ofcorrosive environments.

Eliminates need forseparate lockout device.

SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFENon-wetted: PFA, PVDF, 18-8 SS, Viton seals, PTFE coated SS springs

Pressure RangesForward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)Backward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)


Temperature RangesAmbient: 0° - 150° F (17° - 66° C)

Fluid: 0° - 266° F (17° - 130° C)

Product OverviewThe MV-10 PFA 2 Way Diaphragm Valve is designed foruse in high purity semiconductor applications. It is alsoideally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined sealing areas.A one piece machined modified PTFE diaphragm is alsoutilized for excellent flexibility and life. A full 1/4” orificeprovides maximum flow capability in a compact package.

MV-10 1/4” Manual 2 Way Valve




11

PVDF SCREWCOVER

-10

1/4" PARFLARE1.23

[31.24]1.12

[28.45]

HEX NUTW/ STUD

3/8" PARFLARE3/8" PARGRIP1/4" PARGRIP

1.13 [28.70]

.40 [10.16]

[31.75]

-02

.40 [10.16]

.40 [10.16]

-01

.40 [10.16]

IN

OU

T

.88 [22.35]

APDV

F 1/4"1/4"

ALF

RE

P R

2.20 [55.82]

.13[3.30]MAX

PANELTHK.

1.25 [31.78]

1.15 [29.21]

-00

IN

.050 R[1.30]

.527[13.39] OUT

SCREW

Ø1.250BOLT CIRCLE

Ø1.00/1.02 [25.40/25.91] PANEL HOLE (NOTE: ORIENTATION OF LOCATING SLOT DEPENDENT UPON VALVE/MOUNTING CONFIGURATION.)

LOCATING TAB

POSITION

1/4" FNPT

.56 [14.22]

MOUNTINGCONFIGURATIONS(MV-10-XXXX-XX)

.31 [7.87]

Pargrip models are supplied with PFA nuts. Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.


rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroPXX-noitarugifnoCgnitnuoM

)evobAdetcipeD(


XX-4401-01-VM 06. 6.8

FFO/NO

TPNF"4/1wercS=00

erauqS08.dutS/wercS=10elcriCtloB52.1ØdutS/wercS=20

srevoCwercSFDVP=01

XX-4302-01-VM 42. 4.3 pirgraP"4/1XX-6402-01-VM 26. 8.8 pirgraP"8/3XX-4206-01-VM 02. 8.2 eralfraP"4/1XX-6406-01-VM 26. 8.8 eralfraP""8/3

1.53 [38.86]

.76 [19.3]

2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]

SLOT TYP.

1.25 [31.75] SQ.

.50 [12.7]

.20 [5.08]

seirosseccA noitpircseD

01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VMdna00-XXXX-01-VMhtiwesuroF.esaBgnitnuoMni-panSFDVP

DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34

FLOW RATE (lpm)PRESSURE DROP VS. FLOW RATE

1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5

1/4" Parflare1/4" Pargrip1/4" FNPT 3/8" Parflare & Pargrip




12



Quarter turn operationwith removable handlefor tamper resistance.



Less downtime.




Pressure RangesForward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)Backward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)



Fluid: 0° - 266° F (17° - 130° C)






13

PVDF SCREWCOVER

-10

1.23 [31.24]

1.12 [28.45]

HEX NUTW/ STUD


1.13 [28.70]

.40 [10.16]

[31.75]

-02

.40 [10.16]

.40 [10.16]

-01

.40 [10.16]

-00

IN

.050 R[1.30]

.527[13.39] OUT

SCREW

Ø1.250BOLT CIRCLE

Ø1.00/1.02 [25.40/25.91] PANEL HOLE (NOTE: ORIENTATION OF LOCATING SLOT DEPENDENT UPON VALVE/MOUNTING CONFIGURATION.)

1/4" FNPT

.56 [14.22]

MOUNTINGCONFIGURATIONS(MV-10-XXXX-XX)

2.20 [55.82]

COMNC NO

1.15 [29.21]

1.25 [31.78]

.88 [22.35]

LOCATING TAB

POSITION

.13[3.30]MAX

PANELTHK.

.63 [15.90]

AAFFLLAA

RRPPFF

VV

EERR

PPDD

1/4"1/4"

.31 [7.87]

1/4" PARFLARE




DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5



01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VMdna00-XXXX-01-VMhtiwesuroF.esaBgnitnuoMni-panSFDVP

1.53 [38.86]

.76 [19.3]

2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]

SLOT TYP.

1.25 [31.75] SQ.

.50 [12.7]

.20 [5.08]


)evobAdetcipeD(

XX-4431-01-VM 06. 6.8

YAW3

TPNF"4/1wercS=00


srevoCwercSFDVP=01

XX-4332-01-VM 42. 4.3 pirgraP"4/1XX-6432-01-VM 26. 8.8 pirgraP"8/3XX-4236-01-VM 02. 8.2 eralfraP"4/1XX-6436-01-VM 26. 8.8 eralfraP""8/3




14

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.


Submergible optionisolates all valvecomponents from theexternal environment.



Less downtime.


Valve remains functionalwhile operating in wet orgaseous corrosiveenvironments.

SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFENon-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs

Pressure RangesForward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)Backward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)



Fluid: 0° - 266° F (17° - 130° C)






15

.375 [9.52]MAX. PANEL

WIDTH

4.98 [126.47]

2X .26 [6.60]

1.81 [46.05]

2.02 [51.33]

.55 [14.00]

Ø2.90[Ø73.66]

1/2" FNPT 3/4" PARFLARE

1/2" PARFLARE

OUT OUT

Ø1.437 [36.50]

PANEL HOLE DETAIL

PORTPORT

2X Ø.125[Ø3.18]

2.36 [59.94]

1.74 [44.17]

2.31 [58.75]

2.05 [52.10]

1/2" PARBOND 3/4" PARBOND

OUT

2.02 [51.33]

OUT

1.63 [41.35]

1.56 [39.65]

.75 [19.05]

IN

TEST PORT CONNECTION, 1/4-28 UNF



Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.

100-11-VM 3.2 8.23

FFO/NO

eralfraP"2/1200-11-VM 7.3 8.25 eralfraP"4/3300-11-VM 7.3 8.25 dnobraP"2/1400-11-VM 7.3 8.25 dnobraP"4/3500-11-VM 7.3 8.25 TPNF"2/1

rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP


FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113

1/2" ParfareAll Other Configurations




16






Less downtime.




Pressure RangesCOM to NO: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)COM to NC: 27” HG vacuum (913 mbar) to 25 PSIG (1.7 bar) minimumNC to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)

with 50 PSIG (3.4 bar) maximum back pressure



Fluid: 0° - 266° F (17° - 130° C)

Product OverviewThe MV-11 PFA 3 Way Diaphragm Valve is designed foruse in high purity semiconductor applications. It is alsoideally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined sealing areas.One piece machined modified PTFE diaphragms are alsoutilized for excellent flexibility and life. A full 1/2” orificeprovides maximum flow capability in a compact package.





17

1/2" FNPT

NO

3/4" PARFLARE

2.01 [50.93]

2.06 [52.25]

NO

1/2" PARBOND

2.06 [52.25]

NO

3/4" PARBOND

NO

.375 [9.52] MAX.PANEL WIDTH

NC

"1/2

APDVP

F

COM

REA

LF

R

1.82 [46.20]

5.87 MAX. [149.07]

Ø1.636 [41.55]

1.58 [40.18]

2.88 [73.03]

MOUNTING DETAIL

Ø1.44 [36.58]

2X .68 [17.32]

[1.65]2X R .065

PANEL HOLE DETAIL

.57 [14.40]

Ø2.93

2X Ø.26

3.23 [82.12]

2.60 [65.96]

1.30 [33.07]

[74.42]

[6.60]

1/2" PARFLARE

TEST PORT CONNECTIONS, 1/4-28 UNF





120-11-VM 9.1 1.72

YAW3



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113





18

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groovediaphragm to body sealassures leak freeoperation.


Multi-turn operation.

Removable handle.



Less downtime.


Precise flow adjustment.






Fluid: 0° - 266° F (17° - 130° C)

Product OverviewThe MV-11 PFA Adjustable Diaphragm Valve is designedfor use in high purity semiconductor applications. It isalso ideally suited for ultra-pure water and aggressivechemical or gas applications. The design utilizes a moldedhigh purity PFA body with precision machined sealingareas. A one piece machined modified PTFE diaphragmis also utilized for excellent flexibility and life. Multi-turncapability allows precise flow adjustment. A full 1/2” orificeprovides maximum flow capability in a compact package.

MV-11 1/2” Manual 2 Way Adjustable Valve




19

.375 [9.52]MAX. PANEL

WIDTH

3/4" PARFLARE

OUTOUT

1/2" FNPT

Ø2.90[Ø73.66]

2X Ø1.25[Ø3.18]

1.81 [46.05]

2X .26 [6.60]

.55 [14.00]

2.02 [51.33]

4.96 [125.98]

PORT

Ø1.437 [36.50]

PORT

PANEL HOLE DETAIL

1/2" PARFLARE

2.36 [59.94]

1.74 [44.17]

2.31 [58.75]

1.63 [41.35]

1.56 [39.65]

.75 [19.05]

IN

OUT

2.05 [52.10]


2.02 [51.33]

OUT

TEST PORT CONNECTION, 1/4-28 UNF


MV-11 1/2” Manual 2 Way Adjustable Valve



102-11-VM 3.2 8.23

.JDA



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113





20






Less downtime.






Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)

Fluid: 0° - 266° F (-17° - 130° C)

Product OverviewThe MV-12 PFA Diaphragm Valve is designed for use inhigh purity semiconductor applications, and is also ide-ally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined seat and dia-phragm sealing areas. A one piece machined modifiedPTFE diaphragm is also utilized for excellent flexibilityand life. The valve requires three full turns from the fullyclosed to fully open position. A full 1” orifice provides maxi-mum flow capability in a compact package.

MV-12 1” Manual 2 Way Valve




21

7.03 [178.56]

1.07[27.23]

4.00 [101.70]

2.32 [58.85]

3/4" PARBOND

2.59 [65.86]

1" PARFLARE

Ø4.22 [Ø107.19]

2X Ø.28 [Ø7.11]

3.75 [95.35]

1.88 [47.68]

1" PARBOND

4.28 [108.81]

2.56 [65.00]

AIR

INOUT

TEST

.26 [6.60]

AIR AND TEST PORTCONNECTIONS, 1/8” FNPT


MV-12 1” Manual 2 Way Valve


100-21-VM 7.51 2.422FFO/NO

dnobraP"1200-21-VM 3.31 9.981 eralfraP"1300-21-VM 6.9 8.241 dnobraP"4/3



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227

3/4" Parbond 1" Parflare1" Parbond




22

FeaturesOne piece PFA stem/handle and bodies.

PFA stem stop.

Angle and straightthrough configurations,with numerous endconfigurations includingParflare available.

SpecificationsMaterials of ConstructionWetted: PFA, PTFENon-wetted: PFA, ETFE, PVDF

Pressure Ranges27” HG vacuum (913 mbar) to 100 PSIG (7 bar)



Fluid: 0° - 266° F (17° - 130° C)

BenefitsHigh strength andcorrosion resistance.

Safer operation.

Reduces connections,mounting space, andoverall cost.

Product OverviewThe MV-13 PFA Needle Valve is designed for high purityor aggressive chemical and gas applications. The designutilizes a molded high purity PFA body and stem as theonly wetted components. The stem sealing area isprecision machined for smooth, consistent flow. A PTFEferrule assures a leak tight seal between stem and body.A PFA stem stop prevents removal of stem from bodyduring operation. The MV-13 is available in straightthrough and angle configurations, several orifice sizes,and numerous end connections.

MV-13 Manual Needle Valve




23

Ø .26[6.48]

Ø 1.50[38.1]

Ø .63 [16.00] .69 [17.53]

1.35 [34.29]

1.23 [31.24]

.56 [14.22]

.57 [14.35]

1.15 [29.21]

1.33 [33.76]

1/2" PARGRIP

1.12 [28.45]

3/8" PARGRIP

.38 [9.52]MAX. PANEL

WIDTH

1/4" PARGRIP

1/8" PARGRIP

.52 [13.28]

1.87 [47.57] (MAX.)

1.13 [28.70]

3/8" PARFLARE

1/4" PARFLARE

.75 [19.05]

1/2" PARFLARE

3.83 [97.35](MAX.)

1.05 [26.54]

5.06[128.52](MAX.)

3.31[84.07](MAX.)

.31 [7.92]

DETAILPANEL HOLE

.52 [13.26]

1/4" FNPT

1/8" FNPT

INLINE ANGLED

1/4" MNPT

.55 [13.97]

Parflare and Pargrip model numbers are supplied with PFA nuts.

MV-13 Manual Needle Valve

rebmuNledoM eziSecifirO noitarugifnoCtroPteltuO/telnI noitarugifnoCwolF

001-31-VM 360. pirgraP"8/1XpirgraP"8/1

thgiartS

401-31-VM 360. eralfraP"4/1XeralfraP"4/1501-31-VM 360. eralfraP"4/1XTPNM"4/1021-31-VM 521. pirgraP"4/1XpirgraP"4/1421-31-VM 521. eralfraP"8/3XeralfraP"8/3521-31-VM 521. eralfraP"2/1XeralfraP"2/1621-31-VM 521. TPNF"8/1XTPNF"8/1361-31-VM 881. pirgraP"8/3XpirgraP"8/3661-31-VM 881. pirgraP"2/1XpirgraP"2/1071-31-VM 881. TPNF"4/1XTPNF"4/1222-31-VM 521. eralfraP"4/1XeralfraP"4/1

elgnA322-31-VM 521. TPNF"4/1XTPNF"4/1522-31-VM 521. eralfraP"8/3XeralfraP"8/3

Cv / Kv vs. TURNS

TURNS

Cv

Kv

0 1

0.1

2

0.2

3

0.3

4

0.4

5

0.5

6

0.6

1.43

2.86

4.28

5.71

7.14

8.57

.188 - All Configurations

.125 - All But 1/4" Pargrip

.125 - All Angle Configurations

.125 - 1/4" Pargrip

.063 - All But 1/8" Pargrip

.063 - 1/8" Pargrip





24

Product OverviewThe MV-14 PFA 2 Way Stop Cock Valve is designed foruse in high purity semiconductor applications. The designutilizes a molded high purity PFA body, and a machinedPTFE stem. The press-fit stem assures a leak tight sealbetween it and the body during operation. Valve operateswith a quick 90° turn operation and has a full 1/8” orifice.

MV-14 Manual 2 Way Stop Cock Valve

SpecificationsMaterials of ConstructionWetted: PFA, PTFENon-wetted: PFA, PVDF

Pressure Ranges0 to 60 PSIG (4.1 bar)



Fluid: 0° - 266° F (17° - 130° C)

FeaturesOne piece precisionmachined stem andmolded high purity PFAbody.

All components made ofchemical resistantmaterials.

Numerous endconfigurations,including Parflareavailable.

BenefitsMaintains system purity.

Suitable for use incorrosive environments.

Allows directinstallation, minimizingadditional connections,reducing cost.




25

1.05 [26.67]

.55 [13.97]

.95 [24.13]

1.63 [41.28]

1.33 [33.66]

[29.21]1.15

1.18 [29.97]

[13.97].55

1.13 [28.70]

.75 [19.05]

1/4" REDI-FLARE

1/8" MNPT

1/4" MNPT

1/8" PARGRIP

1/4" PARGRIP

1/4" PARFLARE



MV-14 Manual 2 Way Stop Cock Valve

rebmuNledoM CV KV noitarugifnoCwolF troPtelnI troPteltuO

300-41-VM 72. 58.3

FFO/NO

pirgraP"4/1 pirgraP"4/1400-41-VM 72. 58.3 pirgraP"4/1 TPNM"8/1500-41-VM 72. 58.3 pirgraP"4/1 TPNM"4/1600-41-VM 72. 58.3 TPNM"4/1 TPNM"4/1700-41-VM 72. 58.3 eralfraP"4/1 eralfraP"4/1510-41-VM 72. 58.3 eralfraP"4/1 TPNM"4/1610-41-VM 72. 58.3 eralfraP"4/1 eralf-ideR"4/1810-41-VM 72. 58.3 pirgraP"8/1 pirgraP"8/1

DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5

All Configurations




26

Product OverviewThe MV-16 PFA diaphragm valve is designed for use inhigh purity semiconductor applications, and is also ide-ally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined seat and dia-phragm sealing areas. A one piece machined modifiedPTFE diaphragm is also utilized for excellent flexibilityand life. The MV-16’s multi-turn capability allows preciseflow adjustment. A full 3/4” orifice provides maximum flowcapability in a compact package.

MV-16 3/4” Manual PFA 2 Way Valve

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.

Halar coated stainlesssteel spring.



Less downtime.


SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFENon-wetted: PVDF, Viton, PTFE coated SS spring

Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.


Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)Fluid: 0° - 266° F (-17° - 130° C)




27

2.73 [69.3 mm]

3.43 [87.1 mm]

6.21 [157.8 mm]

A

1.70 [43.2 mm]

Ø4.38 [Ø111.3 mm]

4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]

4X 75˚EQUALLYSPACED

AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTION, 1/4-28 UNF


Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.*Ends are fused on.


rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroP]mm[ninoisnemiD

A

2160-61-VM 8.5 7.28

FFO/NO

eralfraP"4/3 ]27.041[45.5

10-2160-61-VM 8.5 7.28 gnoLeralfraP"4/3 ]95.461[84.6

6160-61-VM 9.7 6.211 *eralfraP"1 ]56.132[21.9

2170-61-VM 9.7 6.211 dnobraP"4/3 ]68.941[09.5

CRACKING PRESSURE

PRESSURE TO INLET PORT (bar)

PRESSURE TO INLET PORT (psi)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9

SPECIFIED SEALING AREA

PRESSURE DROP VS. FLOW RATE

FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227

3/4" Parflare 3/4" Parbond, 1" Parflare




28

Product OverviewThe MV-16 PFA diaphragm valve is designed for use inhigh purity semiconductor applications, and is also ide-ally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined seat and dia-phragm sealing areas. A one piece machined modifiedPTFE diaphragm is also utilized for excellent flexibilityand life. The MV-16’s multi-turn capability allows preciseflow adjustment. A full 3/4” orifice provides maximum flowcapability in a compact package.






Less downtime.









29

2.69 [68.4 mm]

3.39 [86.2 mm]

1.66 [42.2 mm]

6.44 [163.4 mm]

Ø4.38 [Ø111.3 mm]

4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]


AB

Parflare models are supplied with PVDF nuts. For PFA nuts add -T to model number.*Ends are fused on.

MV-16 3/4” Manual PFA 3 Way ValveBRACKETED DIMENSIONS

ARE IN mm.


rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroP]mm[nisnoisnemiD

A B

2163-61-VM 4.5 0.77

YAW3

CNMOC

ON

eralfraP"4/3 ]27.041[45.5 ]73.17[18.2

10-2163-61-VM 4.5 0.77 gnoLeralfraP"4/3 ]95.461[84.6 ]73.17[18.2

6163-61-VM 3.7 1.401 *eralfraP"1 ]56.132[21.9 ]28.511[65.4

2173-61-VM 3.7 1.401 dnobraP"4/3 ]68.941[09.5 ]39.47[59.2

2164-61-VM 4.5 0.77

stroPdesreveRYAW3

ONMOC

CN

eralfraP"4/3 ]27.041[45.5 ]73.17[18.2

10-2164-61-VM 4.5 0.77 gnoLeralfraP"4/3 ]95.461[84.6 ]73.17[18.2

6164-61-VM 3.7 1.401 *eralfraP"1 ]56.132[21.9 ]28.511[65.4

2174-61-VM 3.7 1.401 dnobraP"4/3 ]68.941[09.5 ]39.47[59.2

CRACKING PRESSURE



PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9



FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227





30

Product OverviewThe MV-16 PFA sampling valve is designed for use inhigh purity semiconductor applications, and is also ide-ally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined seat and dia-phragm sealing areas. A one piece machined modifiedPTFE diaphragm is also utilized for excellent flexibilityand life. The MV-16’s multi-turn capability allows preciseflow adjustment. The valve incorporates a full flow throughport with a low dead volume down leg.

MV-16 3/4” Manual PFA Sampling Valve

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.





Less downtime.










31

6.49 [164.7 mm]

2.69 [68.4 mm]

3.39 [86.2 mm]

Ø4.38 [Ø111.3 mm]

4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]


1.66 [42.2 mm]

AB


MV-16 3/4” Manual PFA Sampling Valve



rebmuNledoMtroPhguorhT troPelpmaS

troPhguorhT troPelpmaS]mm[nisnoisnemiD

vC vK vC vK A B

806-2165-61-VM 0.31 4.581 3.2 8.23 eralfraP"4/3 eralfraP"2/1 ]27.041[45.5 ]38.86[17.2

216-2165-61-VM 0.31 4.581 6.4 6.56 eralfraP"4/3 eralfraP"4/3 ]27.041[45.5 ]73.17[18.2

217-2165-61-VM 0.31 4.581 9.6 7.89 eralfraP"4/3 dnobraP"4/3 ]27.041[45.5 ]39.47[59.2

806-2175-61-VM 2.52 29.953 3.2 8.23 dnobraP"4/3 eralfraP"2/1 ]68.941[09.5 ]38.86[17.2

216-2175-61-VM 2.52 29.953 6.4 6.56 dnobraP"4/3 eralfraP"4/3 ]68.941[09.5 ]73.17[18.2

217-2175-61-VM 2.52 29.953 9.6 7.89 dnobraP"4/3 dnobraP"4/3 68.941[09.5 ]39.47[59.2

CRACKING PRESSURE

PRESSURE TO THROUGH PORT (bar)

PRESSURE TO THROUGH PORT (psi)

PR

ES

SU

RE

TO

SA

MP

LE

PO

RT

(p

si)

PR

ES

SU

RE

TO

SA

MP

LE

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9





32

FeaturesPrecision machineddiaphragm manufacturedfrom the latest technologymodified PTFE. Providesover five times the flexurallife as compared toconventional PTFE.Tongue and groove sealfor positive diaphragm tobody seal.

Compact designactuator works on aslittle as 20 psi.



Less downtime.

Isolates media fromactuator.

Ease of installation andmaintenance.

SpecificationsMaterials of ConstructionWetted: PTFE, Modified PTFENon-wetted: Anodized Aluminum, SS, Nitrile

Pressure RangesForward: 25” HG vacuum (846 mbar) to 20 PSIG (1.4 bar)Back: 25” HG vacuum (846 mbar) to 20 PSIG (1.4 bar)Actuator: 20 PSIG (1.4 bar) to 120 PSIG (8.3 bar)


Temperature RangesAmbient: -60° - 212° F (-51° - 100° C)Fluid: -60° - 400° F (-51° - 204° C)

Product OverviewThe PV-1 PTFE Miniature Diaphragm Valve is designedfor use in high purity semiconductor applications, and isalso ideally suited for ultra-pure water and aggressivechemical systems. The design utilizes a machinedmodified PTFE body, seat and diaphragm ensuringexcellent flexibility and long life. The valve is available in2 and 3 way configurations. It is ideal for low flow andsmall dose injection applications.

PV-1 Miniature Pneumatic Valve




33


PV-1 Miniature Pneumatic Valve

/ 81

"RA

RG

P

PFA

PI

1/8" PARGRIP

10-32 UNF-2B

.38

.31 SQ.

Ø.50

B

.82

.23 SQ.

[ 7.94 ]

[ 5.72 ]

[ 9.53 ]

[ 12.64 ]

1/8" FNPT

.19[ 4.83 ]

[ 20.83 ]

rebmuNledoM CV KV noitarugifnoCwolF eziSecifirO noitarugifnoCtroPnoisnemiD

B

4311-1-VP 80. 1.1 CN 490. TPNF"8/1 ]56.9[83.

30-4331-1-VP 80. 1.1 YAW3 490. TPNF"8/1 ]56.9[83.

4312-1-VP 80. 1.1 CN 490. pirgraP"8/1 ]31.8[23.

30-4332-1-VP 80. 1.1 YAW3 490. pirgraP"8/1 ]31.8[23.

DE

LTA

-P (

psi

)

0

50

10

40

30

20

DE

LTA

-P (

bar

)

3.5

2.8

2.1

1.4

.70


.38 .76 1.1 1.5 2.31.9

FLOW RATE (gpm).10 .20 .30 .40 .60.50

All Configurations




34





Less downtime.






Normally Closed shown

Product OverviewThe PV-10 PFA Diaphragm Valve is designed for use inhigh purity semiconductor applications. It is also ideallysuited for ultra-pure water and aggressive chemical orgas applications. The design utilizes a molded high purityPFA body with precision machined areas. A one piecemachined modified PTFE diaphragm is also utilized forexcellent flexibility and life. A full 1/4” orifice providesmaximum flow capability in a compact package.

PV-10 1/4” Pneumatic 2 Way Valve




35

1/4" PARFLARE

Ø1.75 [44.45]

IN

OU

T

.88 [22.35]

APDV

F 1/4"1/4"

ALF

RE

P R

1.54 [39.12]

1.23 [31.24]

1.12 [28.45]


1.13 [28.70]

1/4" FNPT

.56 [14.22]

PVDF SCREWCOVER

-10

HEX NUTW/ STUD

.40 [10.16]

[31.75]

-02

.40 [10.16]

.40 [10.16]

-01

.40 [10.16]

-00

IN OUT

SCREW

Ø1.250BOLT CIRCLE

MOUNTINGCONFIGURATIONS(PV-10-XXXX-XX)

1.25 [31.78]

1.15 [29.21]

.31 [7.87]



AIR PORT CONNECTION, 1/8” FNPT


)evobAdetcipeD(

XX-4411-01-VP 06. 6.8 CN TPNF"4/1

wercS=00erauqS08.dutS/wercS=10

elcriCtloB52.1ØdutS/wercS=20srevoCwercSFDVP=01

XX-4421-01-VP 06. 6.8 ON TPNF"4/1XX-4312-01-VP 42. 4.3 CN pirgraP"4/1XX-4322-01-VP 42. 4.3 ON pirgraP"4/1XX-6412-01-VP 26. 8.8 CN pirgraP"8/3XX-6422-01-VP 26. 8.8 ON pirgraP"8/3XX-4216-01-VP 02. 8.2 CN eralfraP"4/1XX-4226-01-VP 02. 8.2 ON eralfraP"4/1XX-6416-01-VP 26. 8.8 CN eralfraP""8/3XX-6426-01-VP 26. 8.8 ON eralfraP""8/3


DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5


1.53 [38.86]

.76 [19.3]

2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]

SLOT TYP.

1.25 [31.75] SQ.

.50 [12.7]

.20 [5.08]


01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VPdna00-XXXX-01-VPhtiwesuroF.esaBgnitnuoMni-panSFDVP

http://oem.cadregister.com/asp/PPoW_Entry.asp?language=GB&company=74127309&elementID=74127309/VALV/http://partspec.thomasnet.com/partspec.ppow?GB&74127424




36


PVDF coated stainlesssteel springs.



Less downtime.






Product OverviewThe PV-10 PFA 3 Way Diaphragm Valve is designed foruse in high purity semiconductor applications. It is alsoideally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined areas. One piecemachined modified PTFE diaphragms are also utilizedfor excellent flexibility and life. A full 1/4” orifice providesmaximum flow capability in a compact package.





37

1.23 [31.24]

1.12 [28.45]


1.13 [28.70]

1/4" FNPT

.56 [14.22]

PVDF SCREWCOVER

-10

HEX NUTW/ STUD

.40 [10.16]

[31.75]

-02

.40 [10.16]

.40 [10.16]

-01

.40 [10.16]

-00

IN OUT

SCREW

Ø1.250BOLT CIRCLE

MOUNTINGCONFIGURATIONS(PV-10-XXXX-XX)

Ø1.75 [44.45]

.63 [15.90]

1.54 [39.12]

COMNC NO

.88 [22.35]

AAFFLLAA

RRPPFF

VV

EERR

PPDD

1/4"1/4"

1/4" PARFLARE

1.25 [31.78]

1.15 [29.21].31

[7.87]AIR PORT CONNECTION, 1/8” FNPT




)evobAdetcipeD(

XX-4431-01-VP 06. 6.8

YAW3

TPNF"4/1wercS=00


srevoCwercSFDVP=01

XX-4332-01-VP 42. 4.3 pirgraP"4/1XX-6432-01-VP 26. 8.8 pirgraP"8/3XX-4236-01-VP 02. 8.2 eralfraP"4/1XX-6436-01-VP 26. 8.8 eralfraP""8/3


DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5



01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VPdna00-XXXX-01-VPhtiwesuroF.esaBgnitnuoMni-panSFDVP

1.53 [38.86]

.76 [19.3]

2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]

SLOT TYP.

1.25 [31.75] SQ.

.50 [12.7]

.20 [5.08]




38






Less downtime.




Pressure RangesForward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)Back: 20 PSIG (1.4 bar) with100 PSIG (7 bar) inlet pressure

50 PSIG (3.5 bar) with 50 PSIG (3.5 bar) inlet pressure70 PSIG (4.9 bar) with 0 PSIG (0 bar) inlet pressure

Actuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)



Normally Closed Shown

Product OverviewThe PV-11 PFA Diaphragm Valve is designed for use inhigh purity semiconductor applications. It is also ideallysuited for ultra-pure water and aggressive chemical orgas applications. The design utilizes a molded high puri-ty PFA body with precision machined areas. A one piecemachined modified PTFE diaphragm is also utilized forexcellent flexibility and life. A full 1/2” orifice provides max-imum flow capability in a compact package.





39

2X .26 [6.60]

1.81 [46.05]

2.02 [51.33]

.55 [14.00]

2.05 [52.10]

2.02 [51.33]

1.63 [41.35]

1.56 [39.65]

.75 [19.05]

2.36 [59.94]

1.74 [44.17]

2.31 [58.75]

3.74 [94.87]

Ø2.90[Ø73.66]


1/2" FNPT 3/4" PARFLARE

1/2" PARFLARE

OUT OUT

OUT OUT

IN




110-11-VP 3.2 8.23

ON

eralfraP"2/1

210-11-VP 7.3 8.25 eralfraP"4/3

310-11-VP 7.3 8.25 dnobraP"2/1

410-11-VP 7.3 8.25 dnobraP"4/3

510-11-VP 7.3 8.25 TPNF"2/1

100-11-VP 3.2 8.23

CN

eralfraP"2/1

200-11-VP 7.3 8.25 eralfraP"4/3

300-11-VP 7.3 8.25 dnobraP"2/1

400-11-VP 7.3 8.25 dnobraP"4/3

500-11-VP 7.3 8.25 TPNF"2/1

rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113





40


PVDF coated stainlesssteel springs.


Multi-position mountingbase.



Less downtime.



Allows for moremounting flexibility andconnector fittingreduction.


Pressure RangesCOM to NO: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)NO to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)COM to NC: 27” HG vaccum (913 mbar) to 80 PSIG (5.5 bar) with

20 PSIG (1.4 bar) maximum back pressureNC to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar) with

50 PSIG (3.4 bar) maximum back pressureActuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)



Product OverviewThe PV-11 PFA 3 Way Diaphragm Valve is designed foruse in high purity semiconductor applications. It is alsoideally suited for ultra-pure water and aggressive chem-ical or gas applications. The design utilizes a molded highpurity PFA body with precision machined areas. One piecemachined modified PTFE diaphragms are also utilizedfor excellent flexibility and life. A full 1/2” orifice providesmaximum flow capability in a compact package.





41

.57 [14.40]

NO

2.01 [50.93]

3/4" PARFLARE

1/2" FNPT

NO

2.88 [73.03]

2.06 [52.25]

1/2" PARBOND

2.06 [52.25]

NO

3/4" PARBOND

NC NO

2.56 [65.10]

3.18 [80.87]

Ø1.636 [41.55]

Ø 2.93[74.42]

FL

REA

P

1

D

F

AP

2" /

VR

4.54 [115.42]

1.82 [46.20]

1.28 [32.47]

1/2" PARFLARE

MOUNTING DETAIL

2X Ø .26[6.60]

1.58 [40.18]

COM

AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTIONS, 1/4-28 UNF




120-11-VP 9.1 1.72

YAW3

eralfraP"2/1220-11-VP 8.2 0.04 eralfraP"4/3320-11-VP 8.2 0.04 dnobraP"2/1420-11-VP 8.2 0.04 dnobraP"4/3520-11-VP 8.2 0.04 TPNF"2/1



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113





42

FeaturesPrecision machineddiaphragmmanufactured from thelatest technologymodified PTFE.Provides over five timesthe flexural life ascompared toconventional PTFE.Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.


Bypass integral to valvebody to prevent stagna-tion of ultra-pure water.

Modified flowconfigurations withnumerous endconnections includingParflare available.



Less downtime.

Reduces effects ofcorrosive environment.

Prevents contaminationof media.



Pressure RangesForward: 27” HG vaccum (913 mbar) to 80 PSIG (5.5 bar) with

20 PSIG (1.4 bar) maximum back pressureBackward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar) with

50 PSIG (3.4 bar) maximum back pressureActuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)



Product OverviewThe PV-11 Adjustable Bypass Valve is designed for usein ultra-pure water applications. The design utilizes amolded high purity PFA body with precision machinedseats. A machined modified PTFE diaphragm is also uti-lized for excellent flexibility and life. The integral bypassvalve prevents the stagnation and deadheading of me-dia in an ultra-pure water system.

PV-11 1/2” Pneumatic Adjustable Bypass Valve




43

.57 [14.40]

NO

2.01 [50.93]

1/2" FNPT

3/4" PARFLARE

1.65 MAX.[41.97]

OUTLET

NONC

1.58 [40.18]

Ø1.636 [41.55]

INLET

3.18 [80.87]

2.56 [65.10]

1/2" PARFLARE

MOUNTING DETAIL

DVP

/F

1

AR

LPA

RF

" 2

E

4.54 [115.42]

1.82 [46.20]

1.28 [32.47]

2.88 [73.03]

2X Ø .26[Ø 6.60]

Ø 2.93[Ø 74.42]

AIR PORT CONNECTION, 1/8” FNPTTEST PORT CONNECTIONS, 1/4-28 UNF


PV-11 1/2” Pneumatic Adustable Bypass Valve


103-11-VP 9.1 1.72CN

eralfraP"2/1203-11-VP 8.2 0.04 eralfraP"4/3503-11-VP 8.2 0.04 TPNF"2/1



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113


Cv / Kv vs. TURNS FOR BYPASS PORT

TURNS

Cv

Kv

0 0.6

.02

1.2

.04

1.8

.06

2.4

.08

3.0

.10

3.6

.12

.29

.57

.86

1.14

1.43

1.71

All Configurations




44






Less downtime.




Pressure RangesForward: 27” HG vaccum (913 mbar) to 100 PSIG (7 bar)Backward: 80 PSIG (5.5 bar) with 100 PSIG (3.4 bar) inlet pressure

100 PSIG (7 bar) with 60 PSIG (4.2 bar) inlet pressureActuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)



Normally Closed shown

Product OverviewThe PV-12 Diaphragm Valve is designed for use in highpurity semiconductor applications, and is also ideally suit-ed for ultra-pure water and aggressive chemical or gasapplications. The design utilizes a molded high purity PFAbody with precision machined seat and diaphragm seal-ing areas. A one piece machined modified PTFE dia-phragm is also utilized for excellent flexibility and life. Afull 1” orifice provides maximum flow capability in a com-pact package.

PV-12 1” Pneumatic 2 Way Valve




45

1.07[27.23]

4.00 [101.70]

2.59 [65.86]

PARFLARE 1"

Ø4.22 [Ø107.19]

2X Ø.28 [Ø7.11]

3.75 [95.35]

1.88 [47.68]

1" PARBOND

4.28 [108.81]

2.56 [65.00]

5.78 [146.81]

.323 [82.04]

(N.O. ONLY)

2.32 [58.85]

PARBOND 3/4"

AIR AND TEST PORTCONNECTIONS, 1/8” FNPT


PV-12 1” Pneumatic 2 Way Valve

rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP

100-21-VP 7.51 2.422

CN

dnobraP"1

200-21-VP 3.31 9.981 eralfraP"1

300-21-VP 6.9 8.241 dnobraP"4/3

rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP

500-21-VP 7.51 2.422

ON

dnobraP"1

600-21-VP 3.31 9.981 eralfraP"1

700-21-VP 6.9 8.241 dnobraP"4/3



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227

3/4" Parbond 1" Parflare1" Parbond




46

Product OverviewThe PV-16 PFA diaphragm valve is designed for use inhigh purity semiconductor applications, and is also ide-ally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined seat and dia-phragm sealing areas. A one piece machined modifiedPTFE diaphragm is also utilized for excellent flexibilityand life. A full 3/4” orifice provides maximum flow capabil-ity in a compact package.

PV-16 3/4” Pneumatic PFA 2 Way Valve





Less downtime.



Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.Actuation: 60 PSIG (4.1 bar) - 120 PSIG (8.3 bar)






47

Ø4.38 [Ø111.3 mm]

4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]


2.73 [69.3 mm]

3.43 [87.1 mm]

1.70 [43.2 mm]

5.28 [134.0 mm]

A



Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.*Ends are fused on.


rebmuNledoM CV KV X-noitarugifnoCwolF noitarugifnoCtroP]mm[ninoisnemiD

A

216X-61-VP 8.5 7.28

CN=1ON=2

eralfraP"4/3 ]27.041[45.5

10-216X-61-VP 8.5 7.28 gnoLeralfraP"4/3 ]95.461[84.6

616X-61-VP 9.7 6.211 *eralfraP"1 ]56.132[21.9

217X-61-VP 9.7 6.211 dnobraP"4/3 ]68.941[09.5

CRACKING PRESSURE



PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9



FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227





48

Product OverviewThe PV-16 PFA diaphragm valve is designed for use inhigh purity semiconductor applications, and is also ide-ally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined seat and dia-phragm sealing areas. A one piece machined modifiedPTFE diaphragm is also utilized for excellent flexibilityand life. A full 3/4” orifice provides maximum flow capabil-ity in a compact package.






Less downtime.






http://oem.cadregister.com/asp/PPoW_Entry.asp?language=GB&company=74127309&elementID=74127309/VALV/http://partspec.thomasnet.com/partspec.ppow?GB&74127424




49

5.53 [140.6 mm]

Ø4.38 [Ø111.3 mm]

Ø3.75 [Ø95.3 mm]

4X .28[7.1 mm]


3.39 [86.2 mm]2.69

[68.4 mm]1.66

[42.2 mm]

AB



Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.*Ends are fused on.


rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroP

snoisnemiD

A B

2163-61-VP 4.5 0.77

YAW3

CNMOC

ON

eralfraP"4/3 ]mm27.041["45.5 ]mm73.17["18.2

10-2163-61-VP 4.5 0.77 gnoLeralfraP"4/3 ]mm95.461["84.6 ]mm73.17["18.2

6163-61-VP 3.7 1.401 *eralfraP"1 ]mm56.132["21.9 ]mm28.511["65.4

2173-61-VP 3.7 1.401 dnobraP"4/3 ]mm68.941["09.5 ]mm39.47["59.2

2164-61-VP 4.5 0.77

stroPdesreveRYAW3

ONMOC

CN

eralfraP"4/3 ]mm27.041["45.5 ]mm73.17["18.2

10-2164-61-VP 4.5 0.77 gnoLeralfraP"4/3 ]mm95.461["84.6 ]mm73.17["18.2

2174-61-VP 3.7 1.401 *eralfraP"1 ]mm56.132["21.9 ]mm28.511["65.4

2174-61-VP 3.7 1.401 dnobraP"4/3 ]mm68.941["09.5 ]mm39.47["59.2

CRACKING PRESSURE



PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9



FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227





50

Product OverviewThe PV-16 PFA sampling valve is designed for use inhigh purity semiconductor applications, and is also ide-ally suited for ultra-pure water and aggressive chemicalor gas applications. The design utilizes a molded highpurity PFA body with precision machined seat and dia-phragm sealing areas. A one piece machined modifiedPTFE diaphragm is also utilized for excellent flexibilityand life. The valve incorporates a full flow through portwith a low dead volume down leg.

PV-16 3/4” Pneumatic PFA Sampling Valve

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE. Providesover five times theflexural life as comparedto conventional PTFE.





Less downtime.










51

2.73 [69.3 mm]

3.43 [87.1 mm]

Ø4.38 [Ø111.3 mm]

1.70 [43.2 mm]

5.28 [134.0 mm]


4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]

AB



Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.

PV-16 3/4” Pneumatic PFA Sampling Valve

rebmuNledoM

troPhguorhT troPelpmaS

troPhguorhT troPelpmaS

snoisnemiD

vC vK vC vK A B

806-2165-61-VP 0.31 4.581 3.2 8.23 eralfraP"4/3 eralfraP"2/1 ]mm27.041["45.5 ]mm38.86["17.2

216-2165-61-VP 0.31 4.581 6.4 6.56 eralfraP"4/3 eralfraP"4/3 ]mm27.041["45.5 ]mm73.17["18.2

217-2165-61-VP 0.31 4.581 9.6 7.89 eralfraP"4/3 dnobraP"4/3 ]mm27.041["45.5 ]mm39.47[59.2

806-2175-61-VP 2.52 29.953 3.2 8.23 dnobraP"4/3 eralfraP"2/1 ]mm68.941["09.5 ]mm38.86["17.2

216-2175-61-VP 2.52 29.953 6.4 6.56 dnobraP"4/3 eralfraP"4/3 ]mm68.941["09.5 ]mm73.17["18.2

217-2175-61-VP 2.52 29.953 9.6 7.89 dnobraP"4/3 dnobraP"4/3 ]mm68.941["09.5 ]mm39.47[59.2

CRACKING PRESSURE



PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9





52

FeaturesPolished sealing sur-faces.

Tongue and grooveexternal seal.

Machined PTFE spring.

Numerous end configura-tions available includingParflare. Available withdifferent configurationson either end.

BenefitsLong life and superiorsealing characteristics.

Eliminates o-rings andcompatibility problems.

Low cracking pressure.


SpecificationsMaterials of ConstructionWetted: PTFENon-wetted: PFA, PVDF, ETFE

Cracking Pressure0.25 PSIG (.017 bar) - 0.75 PSIG (.052 bar)

Back Check Sealing Pressure5.0 PSIG (.35 bar)

Pressure Range27” Hg vacuum (913 mbar) - 120 PSIG (8.3 bar)


Temperature RangesStyle 1: 32° - 212° F (0° - 100° C) Ambient

32° - 266° F (0° - 130° C) FluidStyle 2 & 3: 50° - 212° F (10° - 100° C) Ambient

50° - 266° F (10° - 130° C) FluidStyle 4 & 5: 60° - 212° F (10° - 100° C) Ambient

60° - 266° F (10° - 130° C) Fluid

Product OverviewThe CV-1 PTFE Check Valve is designed for use in highpurity semiconductor applications, and is also ideallysuited for ultra-pure water and aggressive chemical orgas applications. The design utilizes machined PTFEcomponents to provide superior chemical resistance andpurity without requiring o-rings for sealing. The machinedPTFE spring allows for low cracking pressure operationand minimal back pressure for resealing.

CV-1 Check Valve




53

.75 [19.05]

.38 [9.65]

1/8" FNPT1/4" FNPT

1.13 [28.70]

1/4" PARGRIP 1/8" PARGRIP

3/8" FNPT

1.33 [33.76]

1/2" PARGRIP

.50 [12.70]

.50 [12.70]

1.15 [29.21]

STYLE 1

1.52 [38.61]

AR

PLFAR

1.23 [31.24]

3/8" PARFLARE

STYLE 2

1.43 [36.37]

1.35 [34.29]

PV

F/ 1

D

VP

D

LA

RF

ERP

"

A

1/2" PARFLARE

2

E

1/4" PARFLARE

F 1/4"

Ø1.48 [37.59]

Ø1.23 [31.24]

1.12 [28.45]

3/8" PARGRIP

Ø1.86 [47.24]

1/2" FNPT

STYLE 3

1.23 [31.24]

STYLE 4

2.16 [54.81]

Ø2.75 [69.85]

Ø3.25 [82.55]STYLE 5

3.27 [83.06]

3/4"

VP

DF

A

FL

RE

PR

A

3/4" PARFLARE

1.80 [45.72]

P

EAL

R

APR

1"F

FDV

1" PARFLARE

1" FNPT

.78 [19.81]

1.46 [37.08]

.63[16.00]

CV-1 Check Valve


BRACKETED DIMENSIONS ARE IN mm.

rebmuNledoM CV KV elytS noitarugifnoCtroP

2211-1-VC 16.0 87.8 1 TPNF"8/14411-1-VC 15.1 47.12 1 TPNF"4/16611-1-VC 34.2 00.53 2 TPNF"8/38811-1-VC 22.4 77.06 3 TPNF"2/1616111-1-VC 00.41 6.102 5 TPNF"1

2222-1-VC 20.0 92.0 1 pirgraP"8/14422-1-VC 43.0 09.4 1 pirgraP"4/16622-1-VC 89. 11.41 1 pirgraP"8/38822-1-VC 71.2 52.13 2 pirgraP"2/14466-1-VC 62. 47.3 1 eralfraP"4/16666-1-VC 11.1 48.51 1 eralfraP"8/38866-1-VC 30.2 32.92 2 eralfraP"2/1212166-1-VC 31.4 74.95 3 eralfraP"4/3616166-1-VC 58.11 6.071 4 eralfraP"1




54



Less downtime.

Isolates media fromadjusting screw.

Prevent overpressurization in criticalapplications.

FeaturesOne piece precisionmachined diaphragmpoppet manufacturedfrom the latesttechnology modifiedPTFE.

Provides over five timesthe flexural life ascompared toconventional PTFE.

Tongue and groove seatand diaphragm poppetfor positive through flowshut off and diaphragmto body seal.

Field adjustable reliefpressure.

Product OverviewThe RV Relief Valve is designed for use in high puritysemiconductor applications, and is also ideally suited forultra-pure water and aggressive chemicals. The designutilizes a molded PFA body with precision-machined PTFEseats and diaphragm poppet. When a field set reliefpressure is reached, the valve opens and permits flow.The valve resets when 25% of original setpoint is reached.

SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFENon-wetted: PVDF, SS, Brass, ABS, HDPE

Pressure Ranges15 PSIG (1.03 bar) - 120 PSIG (8.3 bar)



RV Relief Valve




55


RV Relief Valve

1.20 [30.36]

.92 [23.34]

1.15 [29.21]

.40 [10.16]

1/4" PARFLARE.40

[10.16]

.40 [10.16]

.40 [10.16] SCREW

1.23 [31.24]

3/8" PARFLARE 1/4" FNPT

.56 [14.22]

3.37 [85.60]

rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP XX-egnaRerusserPgniveileR

XX-441-VR 87. 3.11

FFO/NO

TPNF"4/1GISP06ot51-10GISP021ot06-20XX-426-VR 42. 5.3 eralfraP"4/1

XX-646-VR 07. 2.01 eralfraP"8/3

Parflare model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.




56

SV-2 1/4” Solenoid Valve

Product OverviewThe SV-2 Solenoid Valve is designed for use in high puritysemiconductor applications, and is also ideally suited forultra-pure water and aggressive chemicals. The designutilizes a molded high purity PFA body with precisionmachined areas. A one-piece machined modified PTFEdiaphragm is also utilized for excellent flexibility and longlife. The valve is offered in 2 and 3 way configurations, in3 orifice sizes, and in 2 standard voltages.

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.

Provides over five timesthe flexural life ascompared toconventional PTFE.

Tongue and groove seatand diaphragm forpositive through flowshut off and diaphragmto body seal.



Less downtime.

Isolates media fromsolenoid.

SpecificationsMaterials of ConstructionWetted: PFA, Modified PTFENon-wetted: Coated Aluminum, Plated Steel, SS, PFA, PVDF, Titanate

Pressure RangesForward: 0 - 80 PSIG (5.5 bar)


Temperature RangesAmbient: -60° - 212° F (-51° - 100° C)Fluid: -60° - 400° F (-51° - 204° C)

Solenoid Ratings24 VDC, 115 VAC (Double Wire)All models rated at 9 watts at 68°F (20°C)Coil Duty Cycle: 100%, however, 100% continuous duty may affect

performance of valve, therefore 50% continuousduty is recommended.




57

SV-2 1/4” Solenoid ValveBRACKETED DIMENSIONS

ARE IN mm.

OU

TNIINO

COM

NC

.87 [22.14]

1.25 C/L

.40 [10.16]

.57 [14.35]

Ø1.65

SCREW

.40 [10.16]

.40 [10.16]

[31.75]Ø

1.24 [31.51]

3.97 [100.93]

.40 [10.16]

1/4" FNPT

3-WAY VALVE 2-WAY VALVE

rebmuNledoM CV KV noitarugifnoCwolF eziSecifirO noitarugifnoCtroP X-egatloVdioneloS

X-4411-2-VS 06. 6.8 CN 052. TPNF"4/1CDV42=2CAV511=7

X-4421-2-VS 06. 6.8 ON 052. TPNF"4/1X-4431-2-VS 06. 6.8 YAW3 052. TPNF"4/1

DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5

All Configurations




58

1. Terms and Conditions of Sale: All descriptions, quotations, proposals,offers, acknowledgments, acceptances and sales of Seller’s products aresubject to and shall be governed exclusively by the terms and conditionsstated herein. Buyer’s acceptance of any offer to sell is limited to theseterms and conditions. Any terms or conditions in addition to, or inconsistentwith those stated herein, proposed by Buyer in any acceptance of an offerby Seller, are hereby objected to. No such additional, different or inconsis-tent terms and conditions shall become part of the contract between Buyerand Seller unless expressly accepted in writing by Seller. Seller’s accep-tance of any offer to purchase by Buyer is expressly conditional uponBuyer’s assent to all the terms and conditions stated herein, including anyterms in addition to, or inconsistent with those contained in Buyer’s offer,Acceptance of Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the dateof delivery of the items purchased hereunder. Amounts not timely paid shallbear interest at the maximum rate permitted by law for each month or portionthereof that the Buyer is late in making payment. Any claims by Buyer foromissions or shortages in a shipment shall be waived unless Seller receivesnotice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall bemade F.O.B. Seller’s plant. Regardless of the method of delivery, however,risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Anydelivery dates shown are approximate only and Seller shall have no liabilityfor any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be freefrom defects in material or workmanship for a period of 18 months from dateof shipment from Parker Hannifin Corporation. THIS WARRANTY COM-PRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMSPROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY,GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER.ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER-CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS,IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, ORCOURSE OF DEALING ARE HEREBY DISCLAIMED.NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY ORPARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR INANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACTSHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENTOF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BYBUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLERBE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIALDAMAGES OF ANY KIND OR NATURE WHATSOEVER, INC.LUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR INANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLDHEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OFCONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, IN-CLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARNOR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request tomodify the designs or specifications for the items sold hereunder as well asthe quantities and delivery dates thereof, or may request to cancel all or partof this order, however, no such requested modification or cancellation shallbecome part of the contract between Buyer and Seller unless accepted bySeller in a written amendment to this Agreement. Acceptance of any suchrequested modification or cancellation shall be at Seller’s discretion, andshall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any specialtooling, including without limitation, dies, fixtures, molds and patterns,acquired to manufacture items sold pursuant to this contract. Such specialtooling shall be and remain Seller’s property notwithstanding payment ofany charges by Buyer. In no event will Buyer acquire any interest inapparatus belonging to Seller which is utilized in the notwithstanding anycharges paid by Buyer. Unless otherwise agreed, Seller shall have the rightto alter, discard or otherwise dispose of any special tooling or other propertyin its sole discretion at any time.

8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,confidential information or equipment furnished by Buyer or any other itemswhich become Buyer’s property, may be considered obsolete and may bedestroyed by Seller after two (2) consecutive years have elapsed withoutBuyer placing an order for the items which are manufactured using suchproperty, Seller shall not be responsible for any loss or damage to suchproperty while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices andcharges are exclusive of excise, sales, use, property, occupational or liketaxes which may be imposed by any taxing authority upon the manufacture,sale or delivery of the items sold hereunder. If any such taxes must be paidby Seller or if Seller is liable for the collection of such tax, the amount thereofshall be in addition to the amounts for the items sold. Buyer agrees to payall such taxes or to reimburse Seller therefore upon receipt of its invoice. IfBuyer claims exemption from any sales, use or other tax imposed by anytaxing authority, Buyer shall save Seller harmless from and against anysuch tax, together with any interest or penalties thereon which may beassessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Sellershall have no liability for infringement of any patents, trademarks, copy-rights, trade dress, trade secrets or similar rights except as provided in thisPart 10. Seller will defend and indemnify Buyer against allegations ofinfringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress andtrade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defendat its expense and will pay the cost of any settlement or damages awardedin an action brought against Buyer based on an allegation that an item soldpursuant to this contract infringes the Intellectual Property Rights of a thirdparty. Seller’s obligation to defend and indemnify Buyer is contingent onBuyer notifying Seller within ten (10) days after Buyer becomes aware ofsuch allegations of infringement, and Seller having sole control over thedefense of any allegations or actions including all negotiations for settle-ment or compromise. If an item sold hereunder is subject to a claim that itinfringes the Intellectual Property Rights of a third party, Seller may, at itssole expense and option, procure for Buyer the right to continue using saiditem, replace or modify said item so as to make it noninfringing, or offer toaccept return of said item and return the purchase price less a reasonableallowance for depreciation. Notwithstanding the foregoing, Seller shallhave no liability for claims of infringement based on information provided byBuyer, or directed to items delivered hereunder for which the designs arespecified in whole or part by Buyer, or infringements resulting from themodification, combination or use in a system of any item sold hereunder.The foregoing provisions of this Part 10 shall constitute Seller’s sole andexclusive liability and Buyer’s sole and exclusive remedy for infringementof Intellectual Property Rights.If a claim is based on information provided by Buyer or if the design for anitem delivered hereunder is specified in whole or in part by Buyer, Buyershall defend and indemnify Seller for all costs, expenses or judgmentsresulting from any claim that such item infringes any patent, trademark,copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liablefor delay or failure to perform any of Seller’s obligations by reason ofcircumstances beyond the reasonable control of Seller (hereinafter ‘Eventsof Force Majeure’). Events of Force Majeure shall include without limitation,accidents, acts of God, strikes or labor disputes, acts, laws, rules orregulations of any government or government agency, fires, floods, delaysor failures in delivery of carriers or suppliers, shortages of materials and anyother cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forthherein, together with any amendments, modifications and any differentterms or conditions expressly accepted by Seller in writing, shall constitutethe entire Agreement concerning the items sold, and there are no oral orother representations or agreements which pertain thereto. This Agree-ment shall be governed in all respects by the law of the State of Ohio. Noactions arising out of the sale of the items sold hereunder or this Agreementmay be brought by either party more than two (2) years after the cause ofaction accrues.

9/91-P

The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorizeddistributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. Thisoffer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items,when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptanceof this offer.

Offer of Sale



Parker’Parker’Parker’Parker’Parker’s Chars Chars Chars Chars CharterterterterterTo be a leading worldwide manufacturer of compo-nents and systems for the builders and users of durablegoods. More specifically, we will design, market andmanufacture products controlling motion, flow and pres-sure. We will achieve profitable growth through premiercustomer service.

PrPrPrPrProduct Inforoduct Inforoduct Inforoduct Inforoduct InformationmationmationmationmationNorth American customers seeking product information,the location of a nearby distributor, or repair serviceswill receive prompt attention by calling the ParkerProduct Information Center at our toll-freenumber: 1-800-C-PARKER (1-800-272-7537). InEurope, call 00800-C-PARKER-H (00800-2727-5374).

The Fluid ConnectorsGroup designs, manufacturesand markets rigid and flexibleconnectors, and associatedproducts used in pneumaticand fluid systems.

The Hydraulics Groupdesigns, produces and mar-kets a full spectrum of hy-raulic components and sys-tems to builders and users ofindustrial and mobile machin-ery and equipment.

The Automation Groupis a leading supplier of pneu-matic and electromechanicalcomponents and systems toautomation customers world-wide.

The Seal Group designs,manufactures and distributesindustrial and commercialsealing devices and relatedproducts by providingsuperior quality and totalcustomer satisfaction.

The Filtration Groupdesigns, manufactures andmarkets quality filtration andclarification products, provid-ing customers with the bestvalue, quality, technical sup-port, and global availability.

The InstrumentationGroup is a global leader inthe design, manufacture anddistribution of high-qualitycritical flow components forworldwide process instrumen-tation, ultra-high-purity, medi-cal and analytical applica-tions.

About Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationParker Hannifin is a leading global motion-controlcompany dedicated to delivering premier customerservice. A Fortune 500 corporation listed on the NewYork Stock Exchange (PH), our components and sys-tems comprise over 1,400 product lines that controlmotion in some 1,000 industrial and aerospace mar-kets. Parker is the only manufacturer to offer itscustomers a choice of hydraulic, pneumatic, andelectromechanical motion-control solutions. Our Com-pany has the largest distribution network in its field,with over 7,500 distributors serving nearly 400,000 cus-tomers worldwide.

Parker Hannifin Corporation6035 Parkland Blvd.Cleveland, Ohio 44124-4141Telephone: (216) 896-3000Fax: (216) 896-4000www.parker.com

Parker Hannifin Corporation

The Aerospace Group isa leader in the development,design, manufacture and ser-vicing of control systems andcomponents for aerospaceand related high-technologymarkets, while achievinggrowth through premier cus-tomer service.

The Climate & IndustrialControls Group designs,manufactures and markets sys-tem-control and fluid-handling components and sys-tems to refrigeration, air-condi-tioning and industrial custom-ers worldwide.



Parker Hannifin CorporationPartek7075 East Southpoint RoadTucson, AZ 85706 USATel: (520) 574-2600Fax: (520) 574-2700http://www.parker.com/partek

Catalog 4182R03/05



partek pfa/ptfe valvesparkerstorethailand.com/pdf/pfa_ptfe/4182_a00.pdf · partek operation tucson,...

Documents