partek pfa/ptfe products · partek operation tucson, az 3 overview partek produces products that...

ParParParParPartektektektektekPFA/PTFE Products

Catalog 4183December 2005

http://oem.cadregister.com/asp/PPoW_Entry.asp?language=GB&company=741273094&elementID=74127309/GAPR/

http://www.parker.com/ead/cm2.asp?cmid=10048

Parker Hannifin CorporationPartek OperationTucson, AZ

Table of Contents

©©©©© Copyright 2003, Parker Hannifin Corporation, All Rights Reserved

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONALINJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation byusers having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current productcatalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making thefinal selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporationand its subsidiaries at any time without notice.

WARNING

Technical Information ........................................................................................................................................ 3

RegulatorsPR-1 1/4” PTFE Pressure Regulator ................................................................................................... 4PR-3 1/2” and 1” PTFE Pressure Regulator ........................................................................................ 6BR-1 1/4” PTFE Back Pressure Regulator .......................................................................................... 8BR-3 1/2” and 1” PTFE Back Pressure Regulator ............................................................................... 10

FlowmetersFM-3 PFA/PTFE Flowmeter ................................................................................................................ 12FM-4 PFA/PTFE High Flow Flowmeter ................................................................................................. 14

PumpsPP PTFE Pneumatic Bellows Pump ................................................................................................ 16

Gauge ProtectorsGP PFA Gauge Protector ................................................................................................................. 18GPIL PFA In-line Gauge Protector ....................................................................................................... 20

Spray GunsSG-1 PFA DI Water Spray Gun ........................................................................................................... 22SG-1 PFA Nitrogen Gun ...................................................................................................................... 24

OtherVV Venturi/ Vacuum Generator ......................................................................................................... 26

Specialty and Custom ........................................................................................................................................ 28




3

OverviewPartek produces products that are made from only the finest Fuoropolymers available. These Fluoropolymers areresistant to numerous chemicals and solvents. This information provides only a brief technical overview . For morecomprehensive technical and chemical compatibility information, please ask for Technical Bulletin 0002-T1/USA.

Fluorinated PolymersChemical Properties Electrical Properties Mechanical Properties• Resistivity to corrosive agents • Low dielectric constant • Flexibility at low temperatures• Non-solubility • Low dissipation factor • Low coefficient of friction• Long term weatherability • High arc resistance • Stability at high temperatures• Non-adhesiveness • High surface resistance• Nonflammability • High volume resistivity

PTFE is a fluorocarbon resin that is isostatically compression molded into various shapes and configurations. It ischemically resistant to all chemicals and solvents with the exception of some molten alkali metals, molten sodiumhydroxide, elemental fluorine and certain fluorinating agents. At Partek we use PTFE for machining the bodies andcomponents of various valves and manifolds. It offers chemical resistance and stability at high temperatures.

Modified PTFE material is used primarily for diaphragms and bellows in our products. This material has the sameprocessing and chemically resistant characteristics as the standard product but offers superior cycle life andintegrity in diaphragm products.

PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether. The resultant polymer contains the car-bon-fluorine backbone chain typical of PTFE, but unlike PTFE, does not require special fabricating techniques.PFA pellets have good melt flow characteristics that allow for processing via extrusion, compression, blow, transferand injection molding methods. It has outstanding chemical and solvent resistant characteristics over a tempera-ture range even greater than PTFE. PFA is offered in various grades of purity and cleanliness making it the mate-rial of choice for the semiconductor market.

Cv and Kv Formulas

SGP

Q = Kv

Q = Cv

YP

P = Pressure Drop (PSIG)

SG = Specific Gravity

Q = Flow (GPM)

P = Pressure Drop (BAR)

Y = Specific Gravity (kg/cm3)

Q = Flow (LPM)

1 Kv = 14.26 Cv

“CV” flow factor is the number of gallons of fluid that pass

through a given orifice area in one minute, at a pressuredrop of 1 PSIG.

“KV” flow factor is the number of liters of fluid that pass

through a given orifice area in one minute, at a pressuredrop of 1 bar.

For operation at temperatures above ambient conditions,please refer to the chart above for reduced pressure ratings.

PERCENT OF RATED PRESSURE VS. TEMPERATURE

204˚C14593+38-51 -18

100

90

80

40

60

70

50

30

20

0

PER

CEN

T O

F R

ATE

D O

PER

ATI

NG

PR

ESSU

RE

OPERATING TEMPERATURE

10

400˚F300200+100-60

Technical Information




4

Product OverviewThe 1/4” Pressure Regulators are designed for use in highpurity semiconductor applications, and are also ideallysuited for ultra-pure water and aggressive chemicals. Thedesign utilizes a machined PFA body with precisionmachined seat.

SpecificationsMaterials of Construction:

Wetted Surfaces - PFA, Modified PTFENon Wetted Surfaces - ABS, Brass, SS, PVDF, SS Spring,Chrome Vanadium Die Spring, HDPE.

Pressure Ranges:

Max Primary Pressure - 120 PSIG (8.3 bar)Secondary Pressure Options - 0 to 30 PSIG and 0 to 60 PSIG

Pressure ranges above are for operation at ambient temperature.For use at higher temperatures consult Pressure/Temperaturechart on page 3.

Temperature Ranges:

0°F - 150°F (-17°C - 66° C) Ambient

0°F - 266°F (-17°C - 130° C) Fluid

PR-1 Pressure Regulator

FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.

Provides over five timesthe flexural life ascompared toconventional PTFE.

Non-relieving design-requires a 10 psi differ-ential across the valve.

Tongue and groovediaphragm.

BenefitsHigh cycle life.

Lower replacementcosts.

Less downtime.

Stabilizes systempressure. Ideal for usein DI water systems.

Low hysteresis.

Seal provides protectionfor springs and adjust-ing screw.




5

PR-1 Pressure RegulatorBRACKETED DIMENSIONS

ARE IN mm.

rebmuNledoM lairetaMmirT noitarugifnoCtroP X-erusserPyradnoceS

X-4122-1-RP

EPDH

TPNF"4/1GISP03ot0=1GISP06ot0=2

X-4622-1-RP eralfraP"4/1

X-6622-1-RP eralfraP"8/3

5.61 MAX. [142.20]

Ø1.50 [38.10]

.50 MAX.[12.70]

PANEL HOLETO CLEAR1 3/8”-14

PANEL NUT

1.23 [31.24]

3/8" PARFLARE 1/4" FNPT

.56[14.22]

1/4" PARFLARE

IN

OU

T

1.25 [31.78]

1.15 [29.21]




6




Pressure Ranges:



Temperature Ranges:

0°F - 150°F (-17°C - 66° C) Ambient

0°F - 266°F (-17°C - 130° C) Fluid

Product OverviewThe 1/2” and 1” PTFE Pressure Regulators are designedfor use in high purity semiconductor applications, andare also ideally suited for ultra-pure water and aggressivechemicals. The design utilizes a machined PTFE bodywith precision machined seat and diaphragm sealingarea. The large diaphragm allows for quicker reactiontime to changes upstream, preventing the effects ofpressure surges to be transferred downstream.

FeaturesOne piece precisionmachined diaphragmsmanufactured from thelatest technologymodified PTFE.


Non-relieving designrequires a 10 psi differ-ential across the valve.




Less downtime.


Low hysteresis.

Seal provides protectionof springs and adjustingscrew.




7


rebmuNledoM elytS lairetaMmirT noitarugifnoCtroP X-erusserPyradnoceS A B C

X-8111-3-RP 1 munimulAdezidonA TPNF"2/1

GISP03-0=1GISP06-0=2

Ø ]55.28[52.3 ]46.04[06.1 ]16.561[25.6

X-8611-3-RP 2 munimulAdezidonA eralfraP"2/1 Ø ]94.011[53.4 ]79.54[18.1 ]04.861[36.6

X-61111-3-RP 1 munimulAdezidonA TPNF"1 Ø ]03.411[05.4 ]32.26[54.2 ]71.102[29.7

X-8113-3-RP 1 FDVP TPNF"2/1 Ø ]55.28[52.3 ]46.04[06.1 ]16.561[25.6

X-8613-3-RP 2 FDVP eralfraP"2/1 Ø ]94.011[53.4 ]79.54[18.1 ]04.861[36.6

BRACKETED DIMENSIONSARE IN mm.

BB

AA

PLUGGED 1/4"PLUGGED 1/4"FNPT GAUGE PORTFNPT GAUGE PORT

C (MAX)C (MAX)

STYLE 1STYLE 1 STYLE 2STYLE 2

C (MAX)C (MAX)

BB

AA

PLUGGED 1/4"PLUGGED 1/4"FNPT GAUGE PORTFNPT GAUGE PORT




8

BR-1 Back Pressure Regulator

Product OverviewThe 1/4” PTFE Back Pressure Regulators are designedfor use in high purity semiconductor applications, andare also ideally suited for ultra-pure water and aggressivechemicals. The design utilizes a PFA body with precisionmachined seats.



Pressure Ranges:



Temperature Ranges:

0°F - 150°F (-17°C - 66° C) Ambient

0°F - 266°F (-17°C - 130° C) Fluid

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.


Non-relieving designrequires a 10 psidifferential across thevalve.




Less downtime.


Low hysteresis.

Seal provides protectionfor springs andadjusting screw.




9

BR-1 Back Pressure RegulatorBRACKETED DIMENSIONS

ARE IN mm.

rebmuNledoM lairetaMmirT noitarugifnoCtroP X-erusserPyradnoceS

X-4122-1-RB

EPDH

TPNF"4/1GISP03ot0=1GISP06ot0=2

X-4622-1-RB eralfraP"4/1

X-6622-1-RB eralfraP"8/3

5.61 MAX. [142.20]

Ø1.50 [38.10]

.50 MAX.[12.70]

PANEL HOLETO CLEAR1 3/8”-14

PANEL NUT

1.23 [31.24]

3/8" PARFLARE 1/4" FNPT

.56[14.22]

1/4" PARFLARE

IN

OU

T

1.25 [31.78]

1.15 [29.21]




10



Wetted Surfaces - PTFE, Modified PTFENon Wetted Surfaces - Anodized Aluminum, ABS, Brass, SS,

PVDF, SS Spring, Chrome VanadiumDie Spring, HDPE.

Pressure Ranges:



Temperature Ranges:

0°F - 150°F (-17°C - 66° C) Ambient

0°F - 266°F (-17°C - 130° C) Fluid

Product OverviewThe 1/2” and 1” PTFE Back Pressure Regulators aredesigned for use in high purity semiconductorapplications, and are also ideally suited for use in ultra-pure water and aggressive chemicals. The designutilizes a machined PTFE body with precision machinedseat and diaphragm sealing area. The larger diaphragmallows for quicker reaction time to changes upstream,preventing pressure surges from affecting and changingupstream processes.



Less downtime.

Stabilizes system. Idealfor DI water systems.

Low Hysteresis.

Seal provides protectionof springs and adjustingscrew.

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE.


Non-relieving designrequires a 10 psidifferential across thevalve.





11


rebmuNledoM elytS lairetaMmirT noitarugifnoCtroP X-erusserPyradnoceS A B C


1-3-RB 1 X-81 1 munimulAdezidonA TPNF"2/1

GISP03-0=1GISP06-0=2

Ø ]09.88[05.3 ]50.91[57. ]16.561[25.61-3-RB 1 X-86 1 munimulAdezidonA eralfraP"2/1 Ø ]09.88[05.3 ]50.91[57. ]19.861[56.6

-3-RB 11 X-611 2 dezidonA munimulA TPNF"1 Ø ]00.721[00.5 ]57.13[52.1 ]10.702[51.83-3-RB 1 X-81 1 FDVP TPNF"2/1 Ø ]09.88[05.3 ]50.91[57. ]16.561[25.63-3-RB 1 X-86 1 FDVP eralfraP"2/1 Ø ]09.88[05.3 ]50.91[57. ]19.861[56.6

PLUGGED 1/4" FNPT GAUGE PORT

C(MAX.)

B

1/2" PARFLARE

A

1/2" FNPT


A

1" FNPT

C(MAX.)

B

STYLE 2

2.20 [55.75]

STYLE 1STYLE 1





12

FeaturesTongue and groovebarrel to body seals.

Molded PFA barrel.

Numerous endconnections and flowrates.

BenefitsZero leakage and allows360 degree portorientation.

PFA is most chemicallycompatible and itstranslucency makes forprecise flowmeasurement.

Versatility to provideexact model forapplication.

Product OverviewThe PFA/PTFE Flowmeter is designed for all high purityapplications where precise measurement and control offluids is required. The FM-3 Flowmeter utilizes precisionmachined PTFE bodies and needle valve componets anda molded high purity PFA barrel. Rather than typical face-to-face seals, the FM-3 utilizes tongue and groovetechnology to seal the barrel to the bodies, creating amore postive seal. An integral needle valve is alsoavailable. Panel nut mounting is standard regardless ofthe type of end connection.


Wetted Surfaces - PFA and PTFEExternal Surfaces - PTFE, PFA, and PVDF

Pressure Ranges:

0 PSIG (0 mbar) to 120 PSIG (8.3 bar)

Pressure range above is for operation at ambient temperatures.For use at higher temperatures consult Pressure/Temperaturechart on page 3.

Temperature Ranges:

0° - 212° F (-17° - 100° C) Ambient

0° - 266° F (-17° - 130° C) Fluid

FM-3 Flowmeter




13

ESAER

INC

I

CNRASE

E

VALVE TYPEVALVE TYPEFLOWMETER ONLYFLOWMETER ONLY

[31.24] [31.24]1.23 1.23

WIDTHWIDTHMAX. PANELMAX. PANEL2X .25 [6.35]2X .25 [6.35]

[13.21] [13.21].52 .52

[16.36] [16.36].64 .64

[46.25] [46.25]1.82 1.82

[156.21] [156.21]6.15 6.15

[150.22][150.22]5.915.91

[31.75] SQ. [31.75] SQ.2X 1.25 2X 1.25

HEXHEX2X 1 5/16"2X 1 5/16"

3/8" PARFLARE3/8" PARFLARE

[29.21] [29.21]1.151.15

THREADTHREAD1-20 UNEF-2A1-20 UNEF-2ATO CLEARTO CLEAR2X PANEL HOLE2X PANEL HOLE

[34.29] [34.29]1.351.35

[117.60][117.60]4.634.63

1/4" FNPT1/4" FNPT

1010

99

88

77

44

55

66

33

22

11

1/2" PARFLARE1/2" PARFLARE1/4" PARFLARE1/4" PARFLARE


FM-3 Flowmeter

X1-3-MF 1 XXXX-4411 2

oN=0seY=1

TPNF "4/1 nim/cc004-001=0040nim/cc006-001=0060nim/cc000,1-001=0001nim/cc005,1-071=0051nim/cc000,2-052=0002nim/cc005,2-003=0052nim/cc000,3-006=0003nim/cc000,4-001,1=0004nim/cc000,5-002,1=0005

X1-3-MF 1 XXXX-4466 2 eralfraP "4/1



FLOW CHARACTERISTICS

FLOW RATE (cc/min)

500 1000 1500 2000 2500

FM-3-XXXXXX-2000

FM-3-XXXXXX-2500

FM-3-XXXXXX-1500

0 1000 2000 3000 4000 5000

FM-3-XXXXXX-5000

FM-3-XXXXXX-3000

FM-3-XXXXXX-4000

10

8

6

4

2

0

GR

AD

UA

TIO

N M

AR

K

200 400 600 800 1000

FM-3-XXXXXX-0600

FM-3-XXXXXX-1000

FM-3-XXXXXX-0400

0

rebmuNledoM X-evlaVeldeeN 1 epyTnoitcennoCteltuO/telnI eziSnoitcennoCteltuO/telnI XXXX-egnaRwolF 2




14

FeaturesCompression barrel tobody seals.

PFA barrel.

Unique PTFE floatdesign.

Zero metal.

BenefitsZero leakage and allows360 degree portorientation.

PFA is most chemicallycompatible and itstranslucency makes forprecise flowmeasurement.

Allows for consistentread out and visibility inmany chemicals.

Higher resistance todeionized water andchemicals.

Product OverviewThe PFA/PTFE Flowmeter is designed for all high purityapplications where precise measurement and control offluids are required. The FM-4 Flowmeter utilizes precisionmachined PTFE bodies and needle valve componentsand a high purity PFA barrel. Rather than typical face-to-face seals, the FM-4 utilizes compression technology toseal the barrel to the bodies, creating a more postiveseal. Standard features are an integral needle valve forflow control and panel nuts for mounting.


Wetted Surfaces - PFA and PTFEExternal Surfaces - PTFE, PFA, PolyPro and PVDF

Pressure Ranges:

0 PSIG to 120 PSIG (8.3 bar)

Pressure range above is for operation at ambient temperatures.For use at higher temperatures consult Pressure/Temperaturechart on page 3.

Temperature Ranges:

0° - 212° F (-17° - 100° C) Ambient

0° - 266° F (-17° - 130° C) Fluid

FM-4 Flowmeter




15

2X .50 MAX[12.70]

2X .29 [7.37]

Ø.75[19.05]

2.13[54.10]

2.15[54.61]

7.33 [186.18] MAX

6.00[152.40]

7.80[198.12]

8.07[204.98]

Ø2.00[50.80]

Ø1.90[48.26]


FM-4 Flowmeter

rebmuNledoM evlaVeldeeN epyTnoitcennoCteltuO/telnI eziSnoitcennoCteltuO/telnI egnaRwolF

G20-21216611-4-MF seY eralfraP "4/3 MPG2

G50-21216611-4-MF seY eralfraP "4/3 MPG5

FM-4-11661212-05G

FM-4-11661212-02G

FLOW CHARACTERISTICS

FLOW RATE (gpm)

FLOW RATE (gpm)

GR

AD

UA

TIO

N M

AR

K

GR

AD

UA

TIO

N M

AR

K

0 1.0

2

2.0

4

3.0

6

4.0

8

5.0

10

6.0

2

4

6

8

101.0 2.0 3.0 4.0 5.0 6.0

Direct read out labels are provided for deionized water only. 0-10 read out are provided for all other chemicals.




16

FeaturesPrecision machinedbellows manufacturedfrom the latesttechnology modifiedPTFE. Provides overfive times the flexurallife as compared toconventional PTFE orPFA bellows.

High bellows strokerate.

PTFE Ball check used tocycle between bellowsto provide maximumefficiency.



Less downtime.

Reduces pulsation andeliminates need fordampener.

Product OverviewThe PTFE Pneumatic Bellows Pump is designed for usein ultra- pure water and aggressive chemical applications.The design utilizes a double bellows design to providereliable continuous or intermittent duty. The high bellowsstroke rate minimizes pulsation and provides smoothmore consistent delivery of media.


Wetted Surfaces - PTFE, PFANon Wetted Surfaces - Fluoroloy “A” Rod, Nitrile, PVDF Coated

6061-T6 Aluminum Trim, StainlessSteel.

Pressure Ranges:

Max Driver Supply Pressure - 60 PSIG (4.1 bar)Max Operating Pressure - 60 PSIG (4.1 bar)

Temperature Ranges:

-60° - 212° F (-51° - 100° C) Ambient

-60° - 400° F (-51° - 204° C) Fluid

PP Pneumatic Bellows Pump




17


1/4" FNPT PNEUMATIC

SUPPLY

1.10 [27.94]

3.00 [76.20]

4.00 [101.60]

3.50 [88.90] Ø.266 [6.76]

11.06 [280.92]

8.39 [213.10]

1/2" FNPTOUTLET PORT

5.55 [140.97]

5.00 [127] SQ.

PARTEKTucson, AZ

MOUNTING HOLE PATTERN

BOTTOM PLATE

1/2" FNPTINTLET PORT

FLOW RATE (lpm)

FLOW RATE (gpm)

OU

TL

ET

PR

ES

SU

RE

(p

si)

30

40

50

20 LTR

OU

TL

ET

PR

ES

SU

RE

(b

ar)

2 4 61.4

2.1

2.8

7.6 15.1 22.7

20

60

3.4

4.1

30PSI IN

35PSI IN

40PSI IN

45PSI IN

50PSI IN

rebmuNledoM emuloV eziSnoitcennoCdnE

02-PP RETIL02 TPNF"2/1

PP Pneumatic Bellows Pump




18

2015

is25

p

30

10

5

FeaturesOne piece precisionmachined diaphragmmanufactured from thelatest technologymodified PTFE, providesover five times the flex-ural life ascompared toconventional PTFE.

PTFE and PFA wettedsurfaces.

Tongue and groovediaphragm to body seal.

Suitable for pressure,vacuum, and dual rangeoperation.

BenefitsHigher cycle life result-ing in less downtimeand lower replacementcosts.

Eliminates contamina-tion and fluid compat-ibility issues.

Assures barrier betweenoperating fluid andisolation media.

Reduces number ofdevice installations forvarying pressureranges.


Wetted Surfaces - PFA, Modified PTFEExternal Surfaces - PFA, PVDF, EPR (Fill screw seal)

Pressure Range:

27” Hg vacuum (913 mbar) to 160 PSIG (11 bar)

Pressure ranges above are for operation at ambienttemperature. For use at higher temperatures consult Pressure/Temperature chart on page 3.

Temperature Ranges:

0° - 212° F (-17° -100° C) Ambient

0° - 400° F (-17° - 204° C) Fluid

GP Gauge Protector

Product OverviewThe PFA Gauge Protectors are designed for use in highpurity semiconductor applications, and are also ideallysuited for use in ultra-pure water and aggressive chemi-cals. They protect sensitive gauges from corrosive chemi-cals and are offered with or without a gauge. They canbe fitted with factory supplied gauges and can also befitted with customer specified or customer suppliedgauges upon request.




19

15152020

2525

3030

iisspp1010

55

1/4" MNPT1/4" MNPT

.55 .55 [13.97] [13.97]


1.15 1.15 [29.21] [29.21]ØØ2.11 2.11

[53.59] [53.59]

1/4" FNPT1/4" FNPT

1.53 1.53 [38.74] [38.74]

GP Gauge ProtectorBRACKETED DIMENSIONS

ARE IN mm.

Isolation Fluid: 50/50 mix of deionized water and isopropyl alcohol (Standard unless otherwise specified.)Factory Gauge: 2-1/2” dial

Brass movementPainted steel caseGlass lens1/4” MNPT lower mount

GAUGE PORT CONNECTIONS ARE 1/4-18 FNPT

rebmuNledoMtroPssecorPnoitarugifnoC

erusserPeguaG)GISP(

rebmuNledoMtroPssecorPnoitarugifnoC

erusserPeguaGXX-)GISP(

00-031-PG TPNF"4/1

ENON00-035-PG TPNM"4/1

00-036-PG eralfraP"4/1

XX-131-PG TPNF"4/1GISP03-0=10GISP06-0=20GISP061-0=30

XX-135-PG TPNM"4/1

XX-136-PG eralfraP"4/1




20

FeaturesOne piece precision.machined diaphragmmanufactured from the.latest technologymodified PTFE, providesover five times the flex-ural life as compared toconventional PTFE.

Modified PTFE and PFAwetted surfaces.

Tongue and groovediaphragm to body seal.

Suitable for pressure,vacuum, and dual rangeoperation.

In-line operation.

BenefitsHigher cycle life result-ing in less downtimeand lower replacementcosts.

Eliminates contamina-tion and fluid compat-ibility issues.

Assures barrier betweenoperating fluid andisolation media.

Reduces number ofdevice installations forvarying pressureranges.

Reduces connectionsand entrapment areas.


Wetted Surfaces - PFA, Modified PTFEExternal Surfaces - PFA, PVDF, EPR (Fill screw seal)

Pressure Range:

27” Hg vacuum (913 mbar) to 160 PSIG (11 bar)

Pressure ranges above are for operation at ambienttemperature. For use at higher temperatures consult Pressure/Temperature chart on page 3.

Temperature Ranges:

0° - 212° F (17° -100° C) Ambient

0° - 400° F (17° - 204° C) Fluid

Product OverviewThe PFA In-line Gauge Protectors are designed for usein high purity semiconductor applications, and are alsoideally suited for use in ultra-pure water and aggressivechemicals. The in-line design allows for quick cut-in in-stallation and helps prevent entrapment of fluids. Theyare offered with or without a gauge. They can be fittedwith factory supplied gauges and can also be fitted withcustomer specified or customer supplied gauges uponrequest.

15

25isp

30

5

10 20

GPIL In-line Gauge Protector




21

GPIL In-line Gauge Protector

STYLE 2STYLE 2

STYLE 1STYLE 11.89 1.89

[48.12] [48.12] 1.23 1.23 [31.24][31.24]


1.00 [25.40]1.00 [25.40]

2XR .26 [6.60]2XR .26 [6.60]

2.42 2.42 [61.58][61.58]

1/4" PARBOND1/4" PARBOND

.56.56 [14.22][14.22]

20201515

1010

2525

3030

55

.49 .49 [12.32] [12.32]

.26 [6.60].26 [6.60]

1.151.15 [29.21] [29.21]

FF 1/4"1/4"

AARR

LLFF

EE

VVPP

RRAA

DD PP

2.492.49[63.26] [63.26]

ppssii

2.192.19 [55.50] [55.50]


ØØ 2.11 2.11 [53.59] [53.59]


1.49 1.49 [37.85][37.85]


1.50 1.50 [37.97][37.97]

1/2" PARFLARE 1/2" PARFLARE

1.37 1.37 [34.87][34.87]

1.461.46 [37.08] [37.08]

2.122.12 [53.72] [53.72]

2.822.82 [71.50] [71.50]



rebmuNledoM elytSgnisuoH noitarugifnoCtroP XX-)GISP(erusserPeguaG

Isolation Fluid: 50/50 mix of deionized water and isopropyl alcohol (Standard unless otherwise specified.)Factory Gauge: 2-1/2” dial

Brass movementSteel caseGlass lens1/4” MNPT lower mount

GAUGE PORT CONNECTIONS ARE 1/4-18 FNPT

XX-4466-LIPG 1 eralfraP"4/1

ENON=00GISP03-0=10GISP06-0=20GISP061-0=30


XX-4477-LIPG 1 dnobraP"4/1








22

FeaturesOne piece precisionmachined diaphragm/poppet manufacturedfrom the latesttechnology modifiedPTFE. Provides over fivetimes the flexural life ascompared toconventional PTFE.Wiper seat for positivethrough flow shut offand diaphragm to bodyseal.

Reversible/removablehanger.

Optional recirculationkit.



Less downtime.

Allows hanging in eitherdirection.

Provides low deadvolume, puritymaintaining circulation.


Wetted Surfaces - PFA, Modified PTFEExternal Surfaces - PFA, PVDF, and PET handle retention screw.Other Materials - Stainless steel spring

Pressure Ranges:

0 PSIG (0 bar) to 80 PSIG (5.5 bar)

Pressure range above is for operation at ambient temperature.For use at higher temperatures consult Pressure/Temperaturechart on page 3.

Temperature Ranges:

0° - 150° F (-17° - 66° C) Ambient

0° - 200° F (-17° - 93° C) Fluid

Product OverviewThe PFA DI Water Spray Gun is suitable for use in highpurity semiconductor applications. The design utilizes amolded high purity PFA body with precision machinedsealing areas. A one piece machined modified PTFE di-aphragm/poppet provides excellent flexibility and long life.Wetted surfaces are PFA and modified PTFE thus elim-inating the need for elastomer seals. The SG-1 is avail-able with either 1/4” FNPT or 3/8” Parflare connections.Optional coiled hoses, with or without recirculation fea-ture are also available.

3 [.9]3 [.9]4 [1.2]4 [1.2]

14 [355]14 [355]18 [457]18 [457]

2 [.6]2 [.6]1 [.3]1 [.3]

0

9 [229]9 [229]7 [178]7 [178]

0.62 [16]0.62 [16]

SPRAY PATTERNSPRAY PATTERN

DISTANCE FROM HEAD (feet [meters])DISTANCE FROM HEAD (feet [meters])

SPRAY PATTERN DIAMETER (inches [mm])SPRAY PATTERN DIAMETER (inches [mm]) @ 80 psig (5.5 bar) @ 80 psig (5.5 bar)

SG-1 DI Water Spray Gun




23

T

KE

RAP

.520.520 [13.21] [13.21]

1/4" FNPT1/4" FNPT


5.905.90 [149.89] [149.89]

4.664.66 [118.31] [118.31]

3.803.80 [96.52] [96.52]

.66.66 [16.64] [16.64]

2.802.80 [71.22] [71.22]

3.653.65 [92.76] [92.76]

1.231.23 [31.24] [31.24]


rebmuNledoM noitcennoCdnE noitpircseD

0 10 20 30 40 50 60 70

.7 1.4 2.1 2.8 3.5 4.2 4.9

0.5

1.0

1.5

2.5

2.0

3.0

3.5

1.9

3.8

5.7

9.5

7.6

11.4

13.2

INLET PRESSURE VS. FLOW

FL

OW

(g

pm

)

PRESSURE (psi)

PRESSURE (bar)

FL

OW

(lp

m)

10-1-GS TPNF"4/1 ylnonuGyarpS

20-1-GS eralfraP"8/3 ylnonuGyarpS

10-20-1-GS eralfraP"8/3 ylbmessAnoitalucriceR8510-2001etelpmochtiwnuGyarpS

46G2-RTMBF A/N ylnorotcennoCeeTgnitalucriceR

8510-2001 " lioCPEF'8dna46G2-RTBMFhtiwtiKnoitalucriceRetelpmoC

1610-2001 " ylnolioCPEF'8

SG-1 DI Water Spray Gun




24

SG-1 Nitrogen Gun

FeaturesOne piece precisionmachined diaphragm/poppet manufacturedfrom the latesttechnology modifiedPTFE. Provides over fivetimes the flexural life ascompared toconventional PTFE.Wiper seat for positivethrough flow shut offand diaphragm to bodyseal.

Reversible/removablehanger.



Less downtime.

Allows hanging in eitherdirection.


Interior Surfaces - PFA, Modified PTFE, (optional HDPE filterelement)External Surfaces - PFA, PVDF, and PET handle retention screw.Other Materials - Stainless steel spring

Pressure Ranges:

0 PSIG (0 bar) to 80 PSIG (5.5 bar)

Pressure range above is for operation at ambient temperature.For use at higher temperatures consult Pressure/Temperaturechart on page 3.

Temperature Ranges:

0° - 150° F (-17° - 66° C) Ambient

0° - 200° F (-17° - 93° C) Fluid

Product OverviewThe PFA Nitrogen Gun is suitable for use in high puritysemiconductor applications. The design utilizes a moldedhigh purity PFA body with precision machined sealingareas. Interior surfaces are PFA and a one piecemachined modified PTFE diaphragm/poppet. This designeliminates the need for elastomer seals, while providingexcellent flexibility and long life. The SG-1 is availablewith 1/4” FNPT or 3/8” Parflare connections. Additionaloptions include a .2, or .5 micron filter and a coiled hoseassembly.




25

SG-1 Nitrogen Gun


T

KE

RAP

.520.520 [13.21] [13.21]

1/4" FNPT1/4" FNPT


5.905.90 [149.89] [149.89]

4.664.66 [118.31] [118.31]

3.803.80 [96.52] [96.52]

.66.66 [16.64] [16.64]

3.633.63 [92.20] [92.20]

4.484.48 [113.79] [113.79]

1.231.23 [31.24] [31.24]

rebmuNledoM noitcennoCdnE noitpircseD

30-1-GS TPNF"4/1 )retliFoN(ylnonuGyarpS

40-1-GS eralfraP"8/3 )retliFoN(ylnonuGyarpS

X-30-1-GS TPNF"4/1 )tnemelEnorciM5.0ro,2.0rof5-ro,2-ddA(retliFhtiwnuGyarpS

X-40-1-GS eralfraP"8/3 )tnemelEnorciM5.0ro,2.0rof5-ro,2-ddA(retliFhtiwnuGyarpS

1610-2001 A/N ylnolioCPEF'8

4110-9994 " tnemelEtnemecalpeRnorciM5.0

5110-9994 " tnemelEtnemecalpeRnorciM2.0

0 10 20 30 40 50 60 70

.7 1.4 2.1 2.8 3.5 4.2 4.9

20

40

60

100

80

120

140

.6

1.1

1.7

2.8

2.3

3.4

4.0

INLET PRESSURE VS. FLOW

FL

OW

(f3 h

)

PRESSURE (psi)

PRESSURE (bar)

FL

OW

(m

3 h)

0.5 micron

0.2 micron




26

OUTLETOUTLET INLETINLET

VACUUMVACUUM

Product OverviewThe PTFE Venturi/Vacuum Generator is designed forcorrosive or high purity gas applications. The designconsists of two machined high purity PTFE body halvesattached using a tongue and groove sealing mechanism.The concept of a venturi valve is a short tube with atapered constriction in the middle that causes an increasein the velocity of flow of a fluid and a correspondingdecrease in fluid pressure. This is used in measuring flowor for creating a suction. The lack of moving partseliminates the possibility of media contamination.

FeaturesIntegral nozzle on inletbody half.

PTFE wetted surfaces.

BenefitsEliminates the need forcalibration andrealignment.

Eliminatescontamination and fluidcompatibility issues.


Wetted Surfaces - PTFENon Wetted Surfaces - PVDF, 18-8 stainless steel

Pressure Ranges:0 to 120 PSIG (8.2 bar)

Pressure ranges above are for operation at ambienttemperatures. For use at higher temperatures consult Pressure/Temperature chart on page 3.

Temperature Ranges:0° - 150° F (-17° - 66° C) Ambient

0° - 266° F (-17° - 130° C) Fluid

Motive Fluid:Clean Dry Air, N2 or any other available gas

Motive Consumption (Air):At 40 PSIG: 1.60 SCFMAt 60 PSIG: 1.75 SCFMAt 80 PSIG: 1.80 SCFM

VV Venturi/Vacuum Generator




27

VV Venturi/Vacuum GeneratorBRACKETED DIMENSIONS

ARE IN mm.

SUCTION PRESSURE VS. FLOW RATE

FLOW RATE (SCFH)

PR

ES

SU

RE

(In

ces

Hg

)

0 40

20

80

15

120

10

160

5

0

Motive Pressure = 40 psi



25

VV-041020204VV-041020204

2X 0.38 2X 0.38 [9.65][9.65]

3.18 [ 80.77]3.18 [ 80.77]

1.38 1.38 [35.05][35.05]

0.50 0.50 [12.70][12.70]

2.23 2.23 [56.64][56.64]

VV-046040606VV-046040606

1.151.15 [29.21] [29.21]

3.41 [86.60]3.41 [86.60]

2X 1.232X 1.23 [31.24] [31.24]

PFD

3/8"3/8"

LFA

R

RE

VP

A

2X 1/8" FNPT2X 1/8" FNPT

1/4" 1/4" FNPTFNPT


2X 3/8" PARFLARE2X 3/8" PARFLARE

rebmuNledoM ecifirO troPtelnI troPmuucaV troPteltuO

402020140-VV 060. TPNF"8/1 TPNF"8/1 TPNF"4/1

606040640-VV 060. eralfraP"4/1 eralfraP"8/3 eralfraP"8/3




28

Specialty and Custom

Overview

Partek will design custom assemblies for all your applications. Partek has a state of the art facility with dedicated,expert personnel that are focused on your design and creating a solution to your needs. All of the products passthrough Partek Engineering and customer approval process before being manufactured, assembled and 100% leaktested at our ISO 9001 UHP Facility. These include, but are not limited to, such products as:

• Manifolds• Welded Assemblies• Surface Mounts• Valve Assemblies• Special Customer Components• Miscellaneous Assemblies

We focus on fluorinated polymer flow control products for use in fluid systems where corrosion resistance or highpurity is required. Materials we can manufacture your specialty product from include, but are not limited to, PTFE,Modified PTFE, PFA, FEP, PVDF, and ETFE.

Partek has over 20 years of experience in fabricating products used in applications including semiconductormanufacturing; chemical, food, and pharmaceutical processing; and biomedical and analytical instrumentation.Whatever your specialty applications needs are, Partek can provide it.

Design and Assembly Process

Defining Your NeedsThrough thorough analysis and review, Partek will provide your custom assembly in a timely manner. Based on theanalysis, our expert engineers will create your design to meet your product’s specific application. Armed with thelatest CAD technology, your design will include drafting, layouts, 2-dimensional and 3-dimensional drawings.Partek is committed to working closely with you to develop your concepts into a solution that will exceed all yourspecialty needs.

Quotation and ApprovalPartek will provide a quotation for your approval. The quotation will be submitted with detailed drawings for yourreview, and will also contain our price, delivery time, testing, packaging and prototype (if required).

AssemblyUpon receipt of your signed approval and purchase order, we will manufacture and assemble your custom productin a controlled environment. Our experienced lab technicians will assemble your product to your exact specifica-tions within the required lead time.

SolutionThe product you needed is ready for shipment. Remember, from your initial concepts to the delivery of yourapplication specific product, Partek ensures only the highest quality materials and workmanship in designing andmanufacturing your specialty products.




29

ManifoldsEngineered manifolds combine valves and fittings onto one larger PTFE block. Due to thecontinuous need to reduce space in chemical cabinet environments, you will benefit from:• Reduction in size to the absolute minimum.• Reduction in the quantity of connections.• Fits directly into a given space for minimum assembly time.

Weld AssembliesThe use of Parbond fittings and PFA pipe provides for the most permanent and leakproofconnection available on the market today. Utilizing state of the art fusion welding equip-ment, Partek/Atlantic can assemble a drop in unit for all permanent applications.• Significantly reduces assembly time in the field.• Small assemblies eliminate connections.• Allows customers to modify and improve system efficiency.

Surface MountsIndividual bottom ported valves mounted to a substrate is a growing trend. We manu-facture modular components of various sizes, Cv rates and orientations along withcustom single and multi-station subbases of many diverse flow patterns.• Assembly adaptability in the field due to modular components and blocking plates.• Significantly reduces space and number of connections.• Reduces repair costs with modular components.

Valve AssembliesStandard and/or nonstandard valves coupled together to develop a custom productfor all types of specialty applications. These are constructed, mounted and tested in acomplete drop-in configuration to reduce OEM and MRO assembly, repair time, andtotal fitting connections.• Provides a solution for unique flow applications.• Reduces space to a minimum.• Partek takes a value added approach when engineering these assemblies.

E

SO

LC

S

E

LC

O

WO

FL

PA

RT

EK

O

N

PE

N

EP

O

S

E

CL

O

EK

R

R

PA

PA

RT

EK

OF

LW

OP

E

N

NO

AZ.

,

RG

/1

P"4

A

PI

A

PF

R

PRA

EK

T

TU

CS

R

P

KR A

E

R

A

I

A4"

P

1/

GR

FP

P

,

. Z A

ONR

T

KE

A RP

ARK

P

E SC

UT

E ESACR

IN

DECRAEES

TU

CS

ON

, AZ

NEOPPENO

R

FP

A

IP

A4"

P

1/

GR

,O

. Z A

NR

SC

UT

K

TA R

P

E

ARK

P

E

A4

PR

R

FP

A

IP

1/

G

"

. A , NZ

O

CT

U

S

T

EK

P A R

EEACR

INS

TU

CS

ON

, AZ

DCRAEES

E

PO EN

Special Customer ComponentsSpecially designed components not in the scope of Partek/Atlantic’s standard productline, but the need falls within our manufacturing, machining and molding capabilities tofulfill the customer’s requests. Designated with a CPRT number for internal identificationpurposes.• Solves specific and critical customer applications.• Value added engineering and service.

Miscellaneous AssembliesYour application is our challenge.

Specialty and Custom




30

1. Terms and Conditions of Sale: All descriptions, quotations, proposals,offers, acknowledgments, acceptances and sales of Seller’s products aresubject to and shall be governed exclusively by the terms and conditionsstated herein. Buyer’s acceptance of any offer to sell is limited to theseterms and conditions. Any terms or conditions in addition to, or inconsistentwith those stated herein, proposed by Buyer in any acceptance of an offerby Seller, are hereby objected to. No such additional, different or inconsis-tent terms and conditions shall become part of the contract between Buyerand Seller unless expressly accepted in writing by Seller. Seller’s accep-tance of any offer to purchase by Buyer is expressly conditional uponBuyer’s assent to all the terms and conditions stated herein, including anyterms in addition to, or inconsistent with those contained in Buyer’s offer,Acceptance of Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the dateof delivery of the items purchased hereunder. Amounts not timely paid shallbear interest at the maximum rate permitted by law for each month or portionthereof that the Buyer is late in making payment. Any claims by Buyer foromissions or shortages in a shipment shall be waived unless Seller receivesnotice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall bemade F.O.B. Seller’s plant. Regardless of the method of delivery, however,risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Anydelivery dates shown are approximate only and Seller shall have no liabilityfor any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be freefrom defects in material or workmanship for a period of 18 months from dateof shipment from Parker Hannifin Corporation. THIS WARRANTY COM-PRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMSPROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY,GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER.ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER-CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS,IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, ORCOURSE OF DEALING ARE HEREBY DISCLAIMED.NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY ORPARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR INANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACTSHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENTOF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BYBUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLERBE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIALDAMAGES OF ANY KIND OR NATURE WHATSOEVER, INC.LUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR INANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLDHEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OFCONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, IN-CLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARNOR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request tomodify the designs or specifications for the items sold hereunder as well asthe quantities and delivery dates thereof, or may request to cancel all or partof this order, however, no such requested modification or cancellation shallbecome part of the contract between Buyer and Seller unless accepted bySeller in a written amendment to this Agreement. Acceptance of any suchrequested modification or cancellation shall be at Seller’s discretion, andshall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any specialtooling, including without limitation, dies, fixtures, molds and patterns,acquired to manufacture items sold pursuant to this contract. Such specialtooling shall be and remain Seller’s property notwithstanding payment ofany charges by Buyer. In no event will Buyer acquire any interest inapparatus belonging to Seller which is utilized in the notwithstanding anycharges paid by Buyer. Unless otherwise agreed, Seller shall have the rightto alter, discard or otherwise dispose of any special tooling or other propertyin its sole discretion at any time.

8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,confidential information or equipment furnished by Buyer or any other itemswhich become Buyer’s property, may be considered obsolete and may bedestroyed by Seller after two (2) consecutive years have elapsed withoutBuyer placing an order for the items which are manufactured using suchproperty, Seller shall not be responsible for any loss or damage to suchproperty while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices andcharges are exclusive of excise, sales, use, property, occupational or liketaxes which may be imposed by any taxing authority upon the manufacture,sale or delivery of the items sold hereunder. If any such taxes must be paidby Seller or if Seller is liable for the collection of such tax, the amount thereofshall be in addition to the amounts for the items sold. Buyer agrees to payall such taxes or to reimburse Seller therefore upon receipt of its invoice. IfBuyer claims exemption from any sales, use or other tax imposed by anytaxing authority, Buyer shall save Seller harmless from and against anysuch tax, together with any interest or penalties thereon which may beassessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Sellershall have no liability for infringement of any patents, trademarks, copy-rights, trade dress, trade secrets or similar rights except as provided in thisPart 10. Seller will defend and indemnify Buyer against allegations ofinfringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress andtrade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defendat its expense and will pay the cost of any settlement or damages awardedin an action brought against Buyer based on an allegation that an item soldpursuant to this contract infringes the Intellectual Property Rights of a thirdparty. Seller’s obligation to defend and indemnify Buyer is contingent onBuyer notifying Seller within ten (10) days after Buyer becomes aware ofsuch allegations of infringement, and Seller having sole control over thedefense of any allegations or actions including all negotiations for settle-ment or compromise. If an item sold hereunder is subject to a claim that itinfringes the Intellectual Property Rights of a third party, Seller may, at itssole expense and option, procure for Buyer the right to continue using saiditem, replace or modify said item so as to make it noninfringing, or offer toaccept return of said item and return the purchase price less a reasonableallowance for depreciation. Notwithstanding the foregoing, Seller shallhave no liability for claims of infringement based on information provided byBuyer, or directed to items delivered hereunder for which the designs arespecified in whole or part by Buyer, or infringements resulting from themodification, combination or use in a system of any item sold hereunder.The foregoing provisions of this Part 10 shall constitute Seller’s sole andexclusive liability and Buyer’s sole and exclusive remedy for infringementof Intellectual Property Rights.If a claim is based on information provided by Buyer or if the design for anitem delivered hereunder is specified in whole or in part by Buyer, Buyershall defend and indemnify Seller for all costs, expenses or judgmentsresulting from any claim that such item infringes any patent, trademark,copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liablefor delay or failure to perform any of Seller’s obligations by reason ofcircumstances beyond the reasonable control of Seller (hereinafter ‘Eventsof Force Majeure’). Events of Force Majeure shall include without limitation,accidents, acts of God, strikes or labor disputes, acts, laws, rules orregulations of any government or government agency, fires, floods, delaysor failures in delivery of carriers or suppliers, shortages of materials and anyother cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forthherein, together with any amendments, modifications and any differentterms or conditions expressly accepted by Seller in writing, shall constitutethe entire Agreement concerning the items sold, and there are no oral orother representations or agreements which pertain thereto. This Agree-ment shall be governed in all respects by the law of the State of Ohio. Noactions arising out of the sale of the items sold hereunder or this Agreementmay be brought by either party more than two (2) years after the cause ofaction accrues.

9/91-P

The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorizeddistributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. Thisoffer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items,when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptanceof this offer.

Offer of Sale



Parker’Parker’Parker’Parker’Parker’s Chars Chars Chars Chars CharterterterterterTo be a leading worldwide manufacturer of compo-nents and systems for the builders and users of durablegoods. More specifically, we will design, market andmanufacture products controlling motion, flow and pres-sure. We will achieve profitable growth through premiercustomer service.

PrPrPrPrProduct Inforoduct Inforoduct Inforoduct Inforoduct InformationmationmationmationmationNorth American customers seeking product information,the location of a nearby distributor, or repair serviceswill receive prompt attention by calling the ParkerProduct Information Center at our toll-freenumber: 1-800-C-PARKER (1-800-272-7537). InEurope, call 00800-C-PARKER-H (00800-2727-5374).

The Fluid ConnectorsGroup designs, manufacturesand markets rigid and flexibleconnectors, and associatedproducts used in pneumaticand fluid systems.

The Hydraulics Groupdesigns, produces and mar-kets a full spectrum of hy-raulic components and sys-tems to builders and users ofindustrial and mobile machin-ery and equipment.

The Automation Groupis a leading supplier of pneu-matic and electromechanicalcomponents and systems toautomation customers world-wide.

The Seal Group designs,manufactures and distributesindustrial and commercialsealing devices and relatedproducts by providingsuperior quality and totalcustomer satisfaction.

The Filtration Groupdesigns, manufactures andmarkets quality filtration andclarification products, provid-ing customers with the bestvalue, quality, technical sup-port, and global availability.

The InstrumentationGroup is a global leader inthe design, manufacture anddistribution of high-qualitycritical flow components forworldwide process instrumen-tation, ultra-high-purity, medi-cal and analytical applica-tions.

About Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationAbout Parker Hannifin CorporationParker Hannifin is a leading global motion-controlcompany dedicated to delivering premier customerservice. A Fortune 500 corporation listed on the NewYork Stock Exchange (PH), our components and sys-tems comprise over 1,400 product lines that controlmotion in some 1,000 industrial and aerospace mar-kets. Parker is the only manufacturer to offer itscustomers a choice of hydraulic, pneumatic, andelectromechanical motion-control solutions. Our Com-pany has the largest distribution network in its field,with over 7,500 distributors serving nearly 400,000 cus-tomers worldwide.

Parker Hannifin Corporation6035 Parkland Blvd.Cleveland, Ohio 44124-4141Telephone: (216) 896-3000Fax: (216) 896-4000www.parker.com

Parker Hannifin Corporation

The Aerospace Group isa leader in the development,design, manufacture and ser-vicing of control systems andcomponents for aerospaceand related high-technologymarkets, while achievinggrowth through premier cus-tomer service.

The Climate & IndustrialControls Group designs,manufactures and markets sys-tem-control and fluid-handling components and sys-tems to refrigeration, air-condi-tioning and industrial custom-ers worldwide.



Parker Hannifin CorporationPartek Operation7075 East Southpoint RoadTucson, AZ 85706 USATel: (520) 574-2600Fax: (520) 574-2700http://www.parker.com/partek

Catalog 4183R12/05



partek pfa/ptfe products · partek operation tucson, az 3 overview partek produces products that...

Documents