part2 study 1 1
TRANSCRIPT
-
8/4/2019 Part2 Study 1 1
1/14
Analyzed with SolidWorks Simulation Simulation of Part2 1
Simulation of Part2
Date: Wednesday, October 05, 2011Designer: SolidworksStudy name: Study 1Analysis type:Static
Table of ContentsDescription ............................................ 1
Assumptions .......................................... 2
Model Information ................................... 2
Study Properties ..................................... 4
Units ................................................... 5
Material Properties .................................. 5
Loads and Fixtures................................... 6
Connector Definitions ............................... 7
Contact Information ................................. 7
Mesh Information .................................... 8
Sensor Details ...................................... 10
Resultant Forces ................................... 10
Beams ................................................ 10
Study Results ....................................... 11
Conclusion .......................................... 14
DescriptionNo Data
-
8/4/2019 Part2 Study 1 1
2/14
Analyzed with SolidWorks Simulation Simulation of Part2 2
Assumptions
Model Information
-
8/4/2019 Part2 Study 1 1
3/14
Analyzed with SolidWorks Simulation Simulation of Part2 3
Model name: Part2Current Configuration: Default
Solid BodiesDocument Name and
ReferenceTreated As Volumetric Properties
Document Path/DateModified
-
8/4/2019 Part2 Study 1 1
4/14
Analyzed with SolidWorks Simulation Simulation of Part2 4
Boss-Extrude1
Solid Body
Mass:0.9625 kgVolume:0.000125 m^3Density:7700 kg/m^3
Weight:9.4325 N
C:\Documents andSettings\u0906067\Deskto
p\Part2.SLDPRTOct 05 14:07:20 2011
Study PropertiesStudy name Study 1
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from SolidWorksFlow Simulation
Off
Solver type FFEPlus
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SolidWorks document (C:\Documents andSettings\u0906067\Desktop)
-
8/4/2019 Part2 Study 1 1
5/14
Analyzed with SolidWorks Simulation Simulation of Part2 5
UnitsUnit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Material Properties
Model Reference Properties Components
Name: Alloy SteelModel type: Linear Elastic Isotropic
Default failure
criterion:
Max von Mises Stress
Yield strength: 6.20422e+008 N/m^2Tensile strength: 7.23826e+008 N/m^2Elastic modulus: 2.1e+011 N/m^2
Poisson's ratio: 0.28Mass density: 7700 kg/m^3
Shear modulus: 7.9e+010 N/m^2Thermal expansion
coefficient:1.3e-005 /Kelvin
SolidBody 1(Boss-Extrude1)(Part2)
Curve Data:N/A
-
8/4/2019 Part2 Study 1 1
6/14
Analyzed with SolidWorks Simulation Simulation of Part2 6
Loads and Fixtures
Fixture name Fixture Image Fixture Details
Fixed-1
Entities: 1 face(s)Type: Fixed Geometry
Resultant ForcesComponents X Y Z Resultant
Reaction force(N) 8.55373e-006 9.44208 8.64018e-005 9.44208
Reaction Moment(N-m) 0 0 0 0
Load name Load Image Load Details
Gravity-1
Reference: Top PlaneValues: 0 0 -9.81
Units: SI
-
8/4/2019 Part2 Study 1 1
7/14
Analyzed with SolidWorks Simulation Simulation of Part2 7
Connector DefinitionsNo Data
Contact InformationNo Data
-
8/4/2019 Part2 Study 1 1
8/14
Analyzed with SolidWorks Simulation Simulation of Part2 8
Mesh InformationMesh type Solid Mesh
Mesher Used: Standard mesh
Automatic Transition: Off
Include Mesh Auto Loops: Off
Jacobian points 4 Points
Element Size 5.0015 mm
Tolerance 0.250075 mm
Mesh Quality High
Mesh Information - Details
Total Nodes 14849
Total Elements 9735
Maximum Aspect Ratio 3.6934
% of elements with Aspect Ratio < 3 99.8
% of elements with Aspect Ratio > 10 0
% of distorted elements(Jacobian) 0
Time to complete mesh(hh;mm;ss): 00:00:01
Computer name: EITUPC3-29
-
8/4/2019 Part2 Study 1 1
9/14
Analyzed with SolidWorks Simulation Simulation of Part2 9
Mesh Control Information:
Mesh Control Name Mesh Control Image Mesh Control Details
-
8/4/2019 Part2 Study 1 1
10/14
Analyzed with SolidWorks Simulation Simulation of Part2 10
Control-4
Entities: 2 face(s)Units: mmSize: 3.12594
Ratio: 1.5
Sensor DetailsNo Data
Resultant Forces
Reaction ForcesSelection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 8.55373e-006 9.44208 8.64018e-005 9.44208
Reaction MomentsSelection set Units Sum X Sum Y Sum Z Resultant
Entire Model N-m 0 0 0 0
BeamsNo Data
-
8/4/2019 Part2 Study 1 1
11/14
Analyzed with SolidWorks Simulation Simulation of Part2 11
Study Results
Name Type Min Max
Stress1 VON: von Mises Stress 1.20329 N/m^2Node: 14741
6531.17 N/m^2Node: 1
Part2-Study 1-Stress-Stress1
Name Type Min MaxDisplacement1 URES: Resultant Displacement 0 mmNode: 1
4.4411e-007 mmNode: 196
-
8/4/2019 Part2 Study 1 1
12/14
Analyzed with SolidWorks Simulation Simulation of Part2 12
Part2-Study 1-Displacement-Displacement1
Name Type Min Max
Strain1 ESTRN: Equivalent Strain 1.46686e-010Element: 3432
1.97179e-008Element: 1984
-
8/4/2019 Part2 Study 1 1
13/14
Analyzed with SolidWorks Simulation Simulation of Part2 13
Part2-Study 1-Strain-Strain1
Name Type
Displacement1{1} Deformed Shape
-
8/4/2019 Part2 Study 1 1
14/14
Analyzed with SolidWorks Simulation Simulation of Part2 14
Part2-Study 1-Displacement-Displacement1{1}
Conclusion