parker n2-04 data sheet - international equipment … n2-04 data sheet.pdfparker n2-04 !! the parker...

IET - Used Lab Equipment - Refurbished Analytical Laboratory Instruments

of 7

www.IetLtd.com Proudly serving laboratories worldwide since 1979

CALL +847.913.0777 for Refurbished & Certified Lab Equipment

Parker N2-04

The Parker Balston ELSD (Evaporative Light Scattering Detector) nitrogen generator can produce up to 8 lpm of nitrogen at pressures up to 8 bar. The generator is engineered to transform standard compressed into a safe, regulated supply of nitrogen with minimal operator attention. Pressure flow rates and purities are speciifacally designed to match the stringent requirements of all the ELSD instruments. The ELSD Nitrogen Generators has been tried and tested by all the major ELSD manufactures. Product Features: Produces a continuous supply of high purity nitrogen as a nebulising gas for ELSD No noise, no moving parts, no electrical requirements Utilises Parker’s propriety membrane technology Eliminate dangerous nitrogen cylinders from the laboratory Phthalate-Free, no organic vapours


of 7

Compact design, minimal maintenance Nitrogen us produced by utilising a combination of filtration and membrane separation technologies. A supply of compressed air is filtered by high efficiency coalescing filters to remove all contaminants down to 0.01 micron. Patented propriety hollow fibre membranes then separate the air into a concentrated nitrogen stream. Membrane technology offers some unique performance benefits for ELSD users including phthalate free nitrogen, silent operation, no moving parts and no electrical requirements. There are 10,000’s of systems using Parker Balston membrane technology installed worldwide. Principal Specification Model N2-04 Purity 99% Flow Rates Up to 8 lpm Inlet/Outlet Connection 1/4_” NPT Inlet Pressure 4.1 to 10 bar Ambient Temperature 10 to 35°C Electrical Requirements Not Required Power Consumption N/A Dimensions (H x W x D) 410 x 270 x 340 mm Weight (Shipping) 17 Kg (19) Ordering Information Description Model Number Nitrogen Generator for up to 2 ELSD N2-04 Installation Kit IK7572 Maintenance Items Model Number Change Frequency Maintenance Kit MK7840 12 Months

Nitrogen on Demand, up to 350 lpm The Parker Balston NitroVap nitrogen generator can produce up to 350 lpm of pure nitrogen at pressures up to 8 bar. The generator is engineered to transform standard compressed air into a safe supply of nitrogen with minimal operator attention.


of 7

With a ‘sleep’ economy mode, high volumes of nitrogen are available as required making this an ideal generator for Turbo Vaps, sample concentrators and solvent evaporator applications. Nitrogen is produced by utilising a combination of filtration and membrane separation technologies. A supply of compressed air is filtered by high efficiency coalescing filters to remove all contaminants down to 0.01 micron. Patented propriety hollow fibre membranes then separate the air into a concentrated pure nitrogen stream. Membrane technology offers some unique performance benefits including phthalate free nitrogen, silent operation, no moving parts and no electrical requirements. There are 10,000’s of systems using Parker Balston membrane technology installed worldwide. Principal Specification Model NitroVap-1LV NitroVap-2LV Purity Up to 95% Up to 95% Flow Rates 200 lpm 350 lpm Inlet Pressure 4.1 bar to 10 bar (7 bar

recommended) 4.1 bar to 10 bar (7 bar recommended)

Inlet Connection 1/4” NPT (Female) 1/4” NPT (Female) Outlet Connection 1/4” NPT (Female) 1/4” NPT (Female) Ambient Temperature 10 to 35°C 10 to 35°C Electrical Requirements Not Required Not Required Power Consumption N/A N/A Dimensions (H x W x D) 410 x 270 x 340 mm 410 x 270 x 340 mm Weight (Shipping) 22 Kg (24) 22 Kg (24) Ordering Information Description Model Number 200 lpm NitroVap Nitrogen Generators NitroVap-1LV 350 lpm NitroVap Nitrogen Generators NitroVap-2LV Installation Kit IK76803 Maintenance Items Model Number Change Frequency Maintenance Kit 1LV and 2LV MKNITROVAP 12 Months TOC Gas Generators for Total Organic Carbon Analysers TOC carrier gas on Demand, up to 1,250 ml/min The Parker Balston TOC (Total Organic Carbon) gas generators are a complete system with carefully matched components engineered for easy installation, operation and long term reliability. They are designed to transform standard compressed air into safe supply of hydrocarbon free (<0.05ppm), dry (-73

oC), CO2 free (<1ppm) carrier gas. The TOC gas generators are an ideal alternative as a carrier /

combustion gas to nitrogen, oxygen and air cylinders. Payback periods are typically less than one year. TOC carrier gas is produced by utilising a combination of filtration, heated catalyst and pressure swing adsorption (PSA) technologies. Standard compressed air is filtered by high efficiency coalescing filters to remove all contaminants down to 0.01 micron. The air is then purified using a state-of-art combined heated catalyst module to remove hydrocarbons. Finally the air then passes through two columns filled with


of 7

molecular sieve which adsorb CO2 and moisture. These are desorbed to atmosphere during the pressure swing cycle leaving a supply of ultra pure TOC grade air. Simply connect to the TOC instrument for consistent reliable analysis. Principal Specification Model TOC-625 TOC-1250 Hydrocarbon Concentration < 0.05 ppm < 0.05 ppm Carbon Dioxide Concentration <1.0 ppm < 1.0 ppm Dew Point -73 °C 73 °C Flow Rates 625 ml/min 1250 ml/min Inlet Pressure 4.5 bar to 8.6 bar 4.5 bar to 8.6 bar Ambient Temperature 10 to 35°C 10 to 35°C Electrical Requirements 230VAC - 50Hz 230VAC - 50Hz Power Consumption 80 Watts 170 Watts Dimensions (H x W x D) 318 x 229 x 406 mm 430 x 280 x 430 mm Weight (Shipping) 13 Kg (15) 20 Kg (22) Ordering Information Description Model Number 625 ml/min TOC Gas Generator TOC-625 1,250 ml/min TOC Gas Generator TOC-1250 Reciever Tank - 3 litres at atmospheric pressure 72-007 (required to prevent pressure fluctuations) Installation Kit IK76803 Maintenance Items Model Number Change Frequency Maintenance Kit for TOC-1250 MK7840 12 Months Maintenance Kit for TOC-625 MKTOC625-12 12 Months Maintenance Kit for TOC-625 MKTOC625-36 36 Months FT-IR Purge Gas Generators for Fourier Transform-Infrared FT-IR Purge Gas on Demand, up to 28 lpm

The Parker Balston ‘plug and play’


of 7

FT-IR purge gas generator is engineered to transform standard compressed air from an integral state of the art oil-free compressor, into a safe regulated supply of dry (-73

°°C), CO2 free (< 1 ppm) purge gas.

The FT-IR gas generators are an ideal alternative to nitrogen producing cleaner background spectra in a shorter time. Payback periods are typically less than one year. By removing CO2 and water vapour the signal to noise ratio allows more accurate analysis, particularly from 1,200-2,000, 2,400 and 3,600-4,000 wave numbers. FT- IR purge gas is produced by utilising a combination of compressor, filtration and pressure swing adsorption (PSA) technology. Compressed air is produced from an oil free compressor and then filtered by high efficiency coalescing filters to remove all contaminants down to 0.01 micron. The air then passes through two columns filled with molecular sieve which adsorb CO2 , moisture and hydrocarbons. These are desorbed to atmosphere during the pressure swing cycle leaving a supply of ultra pure air. Simply connect to the instrument for a continuous supply of FT-IR purge gas.

Principal Specification Model 74-5041 Dew Point -73

oC

Carbon Dioxide Concentration < 1.0 ppm Delivery Pressure 5.5 bar Ambient Temperature 10 to 35°C Electrical Requirements 230VAC- 50Hz Power Consumption 1.8 Kw Dimensions (H x W x D) 700 x 310 x 900 mm Weight (Shipping) 93 Kg (98) Ordering Information Description Model Number 28 lpm FT-IR Purge Gas Generator 74-5041 Installation Kit IK7572 Maintenance Items Model Number Change Frequency Maintenance Kit 74065 12 Months Replacement Compressor 74155 18 Months


of 7

FT-IR Purge Gas on Demand, up to 85 lpm The Parker Balston FT-IR purge gas generator is engineered to transform standard compressed air into a clean supply of dry (-73°C), CO2 free (<1 ppm) purge gas. The FT-IR gas generators are an ideal alternative to nitrogen, producing cleaner background spectra in a shorter time. Payback periods are typically less than one year. By removing CO2 and water vapour the signal to noise ratio allows more accurate analysis, particularly from 1,200-2,000, 2,400 and 3,600-4,000 wave numbers. Product Features: • Produces a continuous supply of purge gas for FT-IR’s at a fraction of the cost of nitrogen • Can supply FTIR with microscopes and other accessories • Eliminate costly nitrogen cylinders in the laboratory • Recommended and used by all leading FT-IR manufacturers • Improve signal-to-noise ratio even on non-purge systems - cleaner spectra in a shorter time • Simple, low cost annual maintenance FT- IR purge gas is produced by utilising a combination of filtration and pressure swing adsorption (PSA) technology. An external supply of compressed air is filtered by high efficiency coalescing filters to remove all contaminants down to 0.01 micron. The air then passes through two columns filled with molecular sieve which adsorb moisture and CO2 These are desorbed to atmosphere during the pressure swing cycle leaving a supply of ultra pure dry air.

Principal Specification Model 75-45 75-52 75-62 Dew Point -73°C -73°C -73°C Carbon Dioxide Concentration

< 1.0 ppm < 1.0 ppm < 1.0 ppm

Flow Rates (at 6.9 bar) 14 lpm 28 lpm 85 lpm Inlet/Outlet Pressure 4.1 to 8.6 bar 4.1 to 8.6 bar 4.1 to 8.6 bar Inlet Connection 1/4” NPT (Female) 1/4” NPT (Female) 1/4” NPT (Female) Outlet Connection 1/4” NPT (Female) 1/4” NPT (Female) 1/4” NPT (Female) Ambient Temperature 10 to 35oC 10 to 35oC 10 to 35oC Electrical Requirements 230 VAC - 50Hz -

12VDC 230 VAC - 50Hz - 12VDC

230 VAC - 50Hz - 12VDC

Power Consumption 100 Watts 100 Watts 100 Watts


of 7

Dimensions (H x W x D) 330 x 320 x 180 mm 710 x 320 x 220 mm 1120 x 320 x 220 mm Weight (Shipping) 10 Kg (12) 24 Kg (27) 36 Kg (40) Ordering Information Description Model Number 14 lpm FT-IR Purge Gas Generator 75-45 28 lpm FT-IR Purge Gas Generator 75-52 85 lpm FT-IR Purge Gas Generator 75-62 Installation Kit IK7572 Maintenance Model Number Change Frequency Maintenance Kit for 75-45 MK7505 12 Months Maintenance Kit for 75-52 MK7552 12 Months Maintenance Kit for 75-62 MK7520 12 Months

www.IetLtd.com Proudly serving laboratories worldwide since 1979

CALL +847.913.0777 for Refurbished & Certified Lab Equipment

parker n2-04 data sheet - international equipment … n2-04 data sheet.pdfparker n2-04 !! the parker...

Documents