parametric design of a door systemdesign.mf.edu.mk/data/datafiles/projectdocuments/stojanovska...
TRANSCRIPT
![Page 1: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/1.jpg)
PARAMETRIC DESIGN OF A DOOR SYSTEM
1
Biljana StojanovskaSkopje
September 2008
![Page 2: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/2.jpg)
Introduction
2
The difference between the previous versions of CATIA and CATIA V5 is the possibility to create models via parametric design. The means that a model can be scaled to fit different applications, however, with the same basic functions (interface, attachments contours).
The benefit of this feature is that a standard part can be developed that incorporates a lot of detailed information (strength, kinematics etc) and simply can be applied for different sized application.
The objective here is to investigate the application of this powerful feature by developing a simple part (so-called power copy), apply basic rules and constraints for this part and finally investigate what happens if the detailed (developer owned and protected information) is removed.
![Page 3: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/3.jpg)
Project objectives
3
•CATIA V5 has a powerful feature: it can parametrically modify the same
part’s models to fit in multiple interior applications.
•This feature is not yet explored to it full extend.
•The main objectives of this thesis are : •Investigate the parametric design feature and it’s application in the design of a door handle
assembly (scale models to fit different applications with the same basic functions (interface,
attachments contours, mechanical characteristics)
•Define the boundary conditions and the physic rules for door handle assembly
•Create a simple scalable (power copy) model of a door handle assembly
•Demonstrate the application of the power copy model in different applications
• Investigate if specs can be CASCADED DOWN TO COMPONENTS
•Investigate how the intellectual property can be protected when the model is send outside
the developer organisation
![Page 4: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/4.jpg)
Target
4
•Define the main parameters
•Create a power copy CATIA V5 model
•Manipulate the parameters via an Excel table
•Define the boundary conditions
•Define the behavior of door assembly
![Page 5: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/5.jpg)
Customer requirements for handle
5
• Easy to open
• Self-position after opening
• Ergonomic design
• Applicable in multiple interiors
• Reliable
• Crash resistant
• Esthetics
![Page 6: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/6.jpg)
Benchmarking – door handles
6
Toyota Camry 2007 Toyota Auris
BMW E36Mercedes
![Page 7: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/7.jpg)
Benchmarking - Door lock mechanism
Bowden
7
Golf – latch
Wire with bowden
Mercedes A class – latch
![Page 8: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/8.jpg)
Understanding the physicsand it’s implementation in
CATIA
8
![Page 9: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/9.jpg)
Understanding the physics – Input design parameters
9
X – distance between pull
force and axis of pin
F – pulling force
α – angle of unlocking
FB – force of wire
F
![Page 10: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/10.jpg)
Example 1: carry release handle
10
Carry over (input) Latch performance (output)
Position latch be designed (what is the best position)
What is the Bowden cable displacement, the wire geometry, and latch release forces and how this influence operating efforts
![Page 11: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/11.jpg)
Example 2: carry over latch (investigated)
11
Release handle design and position (output)
Carry over latch (input)
![Page 12: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/12.jpg)
Understanding the physics – conditions that the handle has to survive (experiment information Mercedes A class)
12
Test speed : 100 mm/ min
F= 500 NTemperature +23°
Force 350 NTemperature +70°
-20 °
Direction y –axisSpeed 50 mm/ min
Area: whole area of grip
![Page 13: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/13.jpg)
Understanding the physics – conditions that the handle has to survive (experiment information Mercedes A class)
13
4 cycles in one minute
20 000 cycles on room temperature
10 000 cycles + 80
10 000 cycles – 20
50 cycles – 40
10 000 cycles +40 92% air wetness
Bowden has to be fixed like this x-y max 3 mm elastic deformation
![Page 14: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/14.jpg)
Understanding the physics – conditions that the handle has to survive (experiment information Mercedes A class)
14
Strength of spring
• Not known in these experiments (but effects the return of the handle in first position)
• Has to survive 60 G for 30 s in a centrifuge
(the door can not be open under this condition)
• 40 G Shock test for 30 ms
![Page 15: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/15.jpg)
Understanding the physics – static case
15
Ro – force of reaction in pinRp – force of reaction in padFl – force in latchFr – force of pull
To be analyzed with FEA(Finite Element Analysis)To be analyzed with FEA(Finite Element Analysis)
![Page 16: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/16.jpg)
Understanding the physics – kinematic case
16
Fl – force in latchFr – force of pull
Fr Fl
30º
Closed position
Open position
l
l1
This is the case when the handle is moving from closed to open position and creates an angle of 30º.
Forces applied on the handle in this case are:• force of pull • the distance of its application• moment of the spring • the force of latch and the distance of its application.
Investigating this case we can find out what is the moment of spring and get spring specifications using AutoCAD Mechanical or Mechsof.
![Page 17: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/17.jpg)
What is a Power Copy model
17
A Power Copy is a simple, scalable 3D model, representing the complex real model, on which we can apply the same set of specific features of the real model (geometric elements, formulas, constraints, rules, checks and so forth).
These can be grouped in order to be used in a different context,and presenting the ability to be completely redefined by parameters when inserted.
Power Features capture the design intent and know-how of the designer thus enabling greater reusability and efficiency
![Page 18: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/18.jpg)
18
CATIA power copy modelOuter side
Inner side
Latch
Door panel
Wire
Pin
Handle
![Page 19: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/19.jpg)
Functional parameters
Thickness of handle
(dependant from moment of resistance)
Force in spring
Rotation angle
19
Rotation angle – value gained from experimental measuring
![Page 20: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/20.jpg)
Dependence of thickness of door handle of moment of resistance
6* 2bhW 2*
**6bh
lF
hlFb
***6
Fconst *6
20
![Page 21: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/21.jpg)
Average maximal hand forces
21
For age group 21 to 60 years, for female for horizontal force application:
Mean Force = 233[N]
For age group 21 to 60 years, for male for horizontal force application:
Mean Force = 347[N]
Used force in the equation is the mean force for males
![Page 22: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/22.jpg)
Material specification
22
Used material specifications
Yield strength for Aluminum 210Yield strength for Aluminum 210
215 M215 Mppa a [N/mm²]
![Page 23: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/23.jpg)
Include the occupant ergonomics
23
Ergonomic parameters
•Handle length
•Depth behind handle
•4 finger handle•2 finger handle
![Page 24: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/24.jpg)
Ergonomic measurements
24
Used measurements of male 50% ile for hand length, hand width, and 4 finger length
![Page 25: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/25.jpg)
Assembly parameters excel table
25
Configuration 1Configuration 2Configuration 3
![Page 26: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/26.jpg)
Formulas between parameters
26
Door panel formulas
Door handle formulas
Assembly formulas
![Page 27: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/27.jpg)
ConclusionWith the created power copy model is shown that the time for building several designs of one model can be reduced using the parametricdesign – manipulating parameters via Excel table and formulas.
This power copy model contains created base with information for the physic rules that have to be included in the design of the model and also the ergonomic rules and measurements. These baseshelp the designer so he would not have to do them anew for everydesign.
But if we want to make a big change of some features from this created power copy model, or deleting them, the model will show errors because of the constraints and relations.
So this project is taken one step further and it is developed the idea for a Minimal power copy model.
![Page 28: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/28.jpg)
Minimal power copy modelWith a goal the designer to be unrestrained with a completely
defined power copy model, it is suggested minimal model (basic power copy model) who has the ergonomic and physics restraints given in points and elementary shapes and parameters that can be manipulated with table. They serve as a frame for which the detail geometry is connected. It is going to be a template for work of the designers. Characteristics of this model are:
•Basic sketch (in certain plane) that is created with elementary geometry (points and lines and elementary surface forms and parameters) which is not erasable as a base.
•Parameters from the basic sketch are constrained and manipulated with and excel table and formulas.
•In the same plane of the basic sketch the designer forms new sketch that are using the parameters from the base by restraining them with the corresponding geometric elements from the basic sketch.
•Real geometry can be modeled/ erased multiple times but the basic sketch always remains.
![Page 29: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/29.jpg)
Minimal power copy model
![Page 30: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/30.jpg)
The goal of the created model of a door handle is not to define all geometric (design) details, but to give a common base model withsimple geometry - a functional base model (called a power copy model) with given constraints, functionality and parameters, that can be further used as a base for future detailed design of different models of door handles.
Using this model, it wouldn't be necessary to define again the functionality, which means ergonomic, strength and kinematic constraints, relations and formulas for the parameters, which saves engineering time. All this knowledge is implemented in the powercopy model, which the designer will just have to upgrade with geometric details.
Conclusion
![Page 31: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/31.jpg)
Protection of the model
31
•Send out a “dead” model – a model without history, so it will not be changed
•Products and manufacturing processes shall be securely protected before they are copied or imitated.
•Duplicate development and the infringement of the property rights of third parties shall be avoided by the evaluation of patent literature
![Page 32: PARAMETRIC DESIGN OF A DOOR SYSTEMdesign.mf.edu.mk/data/dataFiles/projectDocuments/Stojanovska Biljana... · to survive (experiment information Mercedes A class) 14 Strength of spring](https://reader035.vdocuments.site/reader035/viewer/2022070710/5ec5354a468d9c056158fb89/html5/thumbnails/32.jpg)
32
Thank you for your attention