AUTOMATIC POLYELECTROLYTE PREPARATION PLANT

PAP-3CDosing equipment

®

AUTOMATIC POLYELECTROLYTE

PREPARATION PLANT

Process Description

The Automatic Polyelectrolyte Preparation Plant PAP-3C.

• PAP 3-C is composed of three chambers: mixing, maturation and the third one that picks the mature polyelectrolyte in optimal condition for dosing.

• Each chamber has 30 minutes retention time.• PAP 3-C is armed with a flow-meter-inlet. • It is equipped with an anticondensation duct.• It has double helix to favour the polyelectrolyte mixture.• Displays allows you to see the product in each phase.• PAP-3C includes alarms for shortage of product, water and pressure.• The hopper is 60l capacity.• The arrangement allows to add polyelectrolyte without stairs.• You can make a bypass in the chambers to spend the entire product during the stops.• First filling function.• It boosts the fast disolution of the polyelectrolyte, avoiding lump formation.• Ideal design for containerized plants, it takes up less space.• PAP-3C counts with electrical panel, with 4” touch screen and automaton S7-1212, it has calibration system of raw

material and concentration control system of finished product.

POLYELECTROLYTE DOSING Kg/h

Poly Concentration % 0,1% 0,3% 0,5%

Maturation time 30 min 2 6 10

Maturation time 20 min 3 8 15

Electrical Board

Inlet Poly.

Water Inlet

Water inlet+Poly.

Purgue Ø20

Purgue Ø63Aspiration Ø32

Mature Poly. Outlet

Pressure Transmitter 3/4”

Stage One: Starts mixing Poly.

Intermediate Phase: The mixture of Poli. It has good characteristics.

Final Phase: Poli. Macerated

Solid PolyelectrolytesClear waterPoly. and water mixture

Technical Specifications

POLYELECTROLYTE PREPARATION PLANT - PAP 3C - INOX RANGE

MODEL PAP 3C-500 PAP 3C-1000

Tank

Capacity (l) 500 1.000

Capacity per chamber m3 166 333

Production Capacity (l/h) 750 1.500

Length (mm) (L) 1.304 1.400

Width (mm) (A) 873 1.163

Height (mm) (H) 1.689 1.765

Material AISI-304 / AISI-316 AISI-304 / AISI-316

Overflow Ø63mm. AISI-316 Ø90mm. AISI-316

Purge Ø63mm. AISI-316 Ø63mm. AISI-316

Aspiration pump Ø32mm. AISI-316 Ø32mm. AISI-316

Pressure sensor outlet Ø3/4". AISI-316 Ø3/4". AISI-316

1st Chamber & transfer drainage Ø20mm. AISI-316 Ø20mm. AISI-316

Scatterer

Material PP PP

Polyelectrolyte Hopper

Capacity (l) 60 60

Dosification (l/min) 0,1-0,5 0,1-0,5

Material AISI-314 AISI-314

Endless AISI-314 AISI-314

Power (kW) 0,18 0,18

Moto-reductor NMRV040 NMRV040

Shaker

Power (kW) 0,37 0,55

Turbine & shaft material AISI-316 AISI-316

Worldwide References

© TORO EQUIPMENT 2018AUTOMATIC PREPARATION POLIELECTROLYTE PLANT

®

TORO EQUIPMENT S.L. (Fábrica)Ctra. Nacional VP-3302, Km 11.

471329, VillavaquerínValladolid-España

TORO EQUIPMENT S.L. (Fábrica y Oficinas)C/ Sauce s/n.

47193 La CistérnigaValladolid-España

Tel +34 983 403047 Fax +34 983 403048toro@toroequipment.comwww.toroequipment.com

ArgentinaAustraliaAustriaBelgiumBoliviaBrazil

BulgariaCanadaChileChina

ColombiaCosta Rica

CroatiaDenmark

EgyptEstoniaFinlandFrance

GermanyGreeceHollandHungary

IndiaIndonesiaIrelandIsraelItalyJapanJordanLatvia

LebanonLithuania

LuxembourgMalaysiaMexicoMoldovaMoroccoPakistanPanama

PeruPoland

PortugalRomaniaRussia

Saudi ArabiaSeychellesSingapore

South AfricaSpain

SwitzerlandThailand

Trinidad &TobagoTunisiaTurkeyUAEUK

UkraineUruguay

USAVenezuela

Factory Villavaquerín - Valladolid

Factory La Cistérniga - Valladolid