panel mount purge flow meter & purge set koi series
TRANSCRIPT
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 1 -
KOI Code. Description.
Connection Length
A 130mm ( C to C )
C 200mm ( C to C )
D 240mm ( C to C )
E 280mm ( C to C )
Material
1 SS304
2 SS316
P PVC
T PTFE (Without Valve)TV Option PTFE (With Valve)
Option
E1 1 SPDT Contact (Fiber Sensor)E2 2 SPDT Contact (Fiber Sensor)R1 1 SPDT Contact (Reed S/W)R2 2 SPDT Contact (Reed S/W)F Flange Connection
Reed S/W Fiber Sensor
KOI SeriesKOI 유량계는 여러 가지 시험 장비 및 반도체 장비 등 판넬 설치용으로 사용됩니다. 이 유량계는 액체나 기체에
사용할 수 있으며 부식성 액체나 기체에도 재질(TEFLON or PVC)을 선택할 수 있습니다. 적용대상에 따라 유량을
조정할 수 있는 니들 밸브 부착형(기본 사양)등이 있으며 압력의 변화에도 적용할 수 있는 정유량변도 부착 할 수
있습니다.
These panel-mounting flow meters are used in various testing equipments and semi conductors. They are
usable for both liquids and gases. User have an option to pick suitable material for use with corrosive liquids
or gases. They have needle valve attached type which can adjust flow rate according to application and types
which can be applied to pressure change.
■ Model Code
■ KOI 접점 타입의 실제 사진 (KOI with dry contact)
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 2 -
KOI-A-1 Series
KOI 유량계는 여러 가지 시험 장비 및 반도체 장비 등 판넬 설치용으로 사용
됩니다. 이 유량계는 액체나 기체에 사용할 수 있으며 부식성 액체나 기체에
도 재질(TEFLON or PVC)을 선택할 수 있습니다. 적용대상에 따라 유량을 조
정할 수 있는 니들 밸브 부착형(기본 사양)등이 있으며 압력의 변화에도 적용
할 수 있는 정유량변도 부착 할 수 있습니다.
( Connection 거리가 130 mm입니다.)
These panel-mounting flow meters are used in various testing equipments
and semi conductors. They are usable for both liquids and gases. User
have an option to pick suitable material for use with corrosive liquids or
gases. They have needle valve attached type which can adjust flow rate
according to application and types which can be applied to pressure
change. (connection to connection : 130mm)KOI-A-1
■ 구조 (Structure) 및 치수 (Dimension)
No. Title. Material.
1 Main Plate AL.C
2 Bottom Block AL.C
3 Top Block AL.C
4 Bottom Body SS304/316/316L
5 Top Body SS304/316/316L
6 Ring B.S / SS304
7 Shaft SS304/316/316L
8 Nipple SS304/316/316L
9 Double Nut Brass
10 Needle Valve SS304/316/316L
11 Cover Acryl
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 3 -
■ 유량 범위 (Flow Rate Table)
Alarm (PAU) Alarm (Reed Switch)
AIR(1atm.0℃) Water AIR(1atm.0℃) Alarm setting range Water Alarm settingrange
4.0~20 NmL/min
6.0~30 NmL/min
10~50 NmL/min
10~100 NmL/min
20~200 NmL/min
30~300 NmL/min
50~500 NmL/min 5.0~50 mL/min 50~500 NmL/min 100~400 NmL/min 5.0~50 mL/min 10~40 mL/min
0.1~1.0 NmL/min 10~100 mL/min 0.1~1.0 NL/min 0.2~0.8 NL/min 10~100 mL/min 20~80 mL/min
0.2~2.0 NL/min 20~200 mL/min 0.2~2.0 NL/min 0.4~1.6 NL/min 20~200 mL/min 40~160 mL/min
0.3~3.0 NL/min 30~300 mL/min 0.3~3.0 NL/min 0.6~2.4 NL/min 30~300 mL/min 60~240 mL/min
0.5~5.0 NL/min 50~500 mL/min 0.5~5.0 NL/min 0.1~4.0 NL/min 50~500 mL/min 100~400 mL/min
1.0~10 NL/min
0.1~1.0 L/min
1.0~10 NL/min 2.0~8.0 NL/min
0.1~1.0 L/min 0.2~0.8 L/min
2.0~20 NL/min 4.0~20 NL/min 4.0~16 NL/min
3.0~30 NL/min 6.0~30 NL/min 6.0~24 NL/min
5.0~50 NL/min0.3~1.5 L/min
10~50 NL/min 10~40 NL/min0.4~2 L/min
■ Standard Specification
Measuring Object Liquids and gas
Measuring
Range
Air Min. 4~20 NmL/min.
Max. 5~50 NL/min. · Air at 0 ℃, 1 atm
Water Min. 5~50 mL/min.
Max. 0.15~1.5 L/min.
Range ability 10:1 10:2 occasionallyAccuracy ±2% of F.S GAS (±2.5% of F.S)
Max. Oper. Press. 10 kgf/㎠G (0.98MPaG) When packing PTFE is used, Max. Oper. Press. is 5 kgf/㎠G
Max. Oper. Temp. 120 ℃ Standard products have the packing materials made of NBR, so Max. Temperature is 80℃
Material ST'D Option (SS304/SS316/SS316L)Body SS304 (ST'D) SS316, SS316L
Tapered tube Pyrex glass
Packing NBR (max. 80℃) Viton (max. 120℃) PTFE (max. 120℃) EPDM (max. 80℃)
Support AluminiumCover Acryl
ConnectionStd. Rc1/4"
Opt. Rc1/8", NPT1/4", NPT3/8"
Mounting
Std. Lock-nut mounting onto
panel front
Opt.
Bezel installation,
Panel-rear installation,
Stand provided etc.Approx. weight
(ST'D type)0.5 kg
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 4 -
KOI-C-1 Series
KOI 유량계는 여러 가지 시험 장비 및 반도체 장비 등에 패널 설치용으로
사용됩니다. 이 유량계는 액체나 기체에 사용할 수 있으며 부식성 액체나
기체에도 재질(TEFLON or PVC)을 선택할 수 있습니다. 적용대상에 따라
유량을 조정할 수 있는 니들 밸브 부착형등이 있으며 압력의 변화에도 적
용할 수 있는 정유량변도 부착 할수 있습니다.
( Connection 거리가 200 mm입니다.)
These panel-mounting flow meters are used in various testing
equipments and semi conductors. They are usable for both liquids and
gases. User have an option to pick suitable material for use with
corrosive liquids or gases. They have needle valve attached type which
can adjust flow rate according to application and types which can be
applied to pressure change.
(connection to connection : 200mm) KOI-C-1
■ 구조 (Structure) 및 치수 (Dimension)
No. Title. Material.
1 Main Plate AL.C
2 Bottom Block AL.C
3 Top Block AL.C
4 Bottom Body SS304/316/316L/PTFE
5 Top Body SS304/316/316L/PTFE
6 Ring B.S/SS304
7 Shaft SS304/316/316L/PTFE
8 Nipple SS304/316/316L/PTFE
9 Double Nut Brass
10 Needle Valve SS304/316/316L/PTFE
11 Cover Acryl
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 5 -
■ 유량 범위 (Flow Rate Table)
Alarm (PAU) Alarm (Reed Switch)
AIR(1atm.0℃) Water AIR(1atm.0℃) Alarm setting range WaterAlarm setting
range
5.0~50 NmL/min
10~100 NmL/min
20~200 NmL/min
30~300 NmL/min
50~500 NmL/min - 50~500 NmL/min 100~400 NmL/min - -
0.1~1.0 NmL/min 10~100 mL/min 0.1~1.0 NL/min 0.2~0.8 NL/min 10~100 mL/min 20~80 mL/min
0.2~2.0 NL/min 20~200 mL/min 0.2~2.0 NL/min 0.4~1.6 NL/min 20~200 mL/min 40~160 mL/min
0.3~3.0 NL/min 30~300 mL/min 0.3~3.0 NL/min 0.6~2.4 NL/min 30~300 mL/min 60~240 mL/min
0.5~5.0 NL/min 50~500 mL/min 0.5~5.0 NL/min 0.1~4.0 NL/min 50~500 mL/min 100~400 mL/min
1.0~10 NL/min
0.1~1.0 L/min
1.0~10 NL/min 2.0~8.0 NL/min
0.1~1.0 L/min 0.2~0.8 L/min2.0~20 NL/min 2.0~20 NL/min 4.0~16 NL/min
3.0~30 NL/min 3.0~30 NL/min 6.0~24 NL/min
5.0~50 NL/min 0.3~3 L/min5.0~50 NL/min 10~50 NL/min 0.3~3.0 L/min 0.5~2.5 L/min
6.0~60 NL/min -
■ Standard Specification
Measuring Object Liquids and gas
Measuring
Range
Air Min. 5~50 NmL/min.
Max. 5~50 NL/min. · Air at 0℃, 1atm
Water Min. 10~100 mL/min.
Max. 0.3~3 L/min.
Range ability 10:1 10:2 occasionally
Accuracy ±2% of F.S GAS (±2.5% of F.S)
Max. Oper. Press. 10 kgf/㎠G (0.98MPaG)
Max. Oper. Temp. 120℃ Standard products have the packing materials made of NBR, so Max. Temperature is 80℃
Material SS304 (ST'D) Option (SS316/SS316L/TEFLON)
Body SS304 SS316/SS316L/TEFLON
Tapered tube Pyrex glass
Packing NBR (max. 80℃) Viton (max. 120℃)
Support Aluminium
Cover Acryl
ConnectionStd. Rc1/4"
Opt. Rc3/8", NPT1/4", NPT1/2"
Mounting
Std. Lock-nut mounting onto
panel front
Opt.
Bezel installation,
Panel-rear installation,
Stand provided etc.
Approx. weight
(ST'D type)0.8 kg
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 6 -
KOI-D-1 Series
KOI 유량계는 여러 가지 시험 장비 및 반도체 장비 등에 패널 설치용으로
사용됩니다. 이 유량계는 액체나 기체에 사용할 수 있으며 부식성 액체나 기
체에도 재질(TEFLON or PVC)을 선택할 수 있습니다. 적용대상에 따라 유량
을 조정할 수 있는 니들 밸브 부착형 등이 있으며 압력의 변화에도 적용할
수 있는 정유량변도 부착 할 수 있습니다.
(Connection 거리가 240mm입니다 )
These panel-mounting flow meters are used in various testing equipments
and semi conductors. They are usable for both liquids and gases. User
have an option to pick suitable material for use with corrosive liquids or
gases. They have needle valve attached type which can adjust flow rate
according to application and types which can be applied to pressure
change.
(connection to connection : 240mm)KOI-D-1
■ 구조 (Structure) 및 치수 (Dimension)
No. Title. Material.
1 Top Block SS304/316/316L
2 Bottom Block SS304/316/316L
3 Plate AL.C
4 Support Bar AL.C
5 Guide Bar SS304/316/316L
6 Screw Nut Brass
7 Nut Set SS304/316/316L
8 Glass Pyrex
9 Cover Acryl
10 Needle Valve SS304/316
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 7 -
■ 유량 범위 (Flow Rate Table)
AIR ( 1atm, 0℃) Water
5~50 NL/min 0.2 ~ 2 L/min
8~80 NL/min 0.4 ~ 4 L/min
10~100 NL/min 1 ~ 10 L/min
20~200 NL/min 1.5 ~ 15 L/min
25~250 NL/min
■ Standard Specification
Measuring Object Liquids and gas
Measuring
Range
Air Min. 5~50 NL/min.
Max. 25~250 NL/min. · Air at 0℃, 1atm
Water Min. 0.2~2 L/min.
Max. 1.5~15 L/min.
Range ability 10:1 Option 6:1
Accuracy ±2% of F.S GAS (±2.5% of F.S)
Max. Oper. Press. 10 kgf/㎠G (0.98MPaG)
Max. Oper. Temp. 120℃ Standard products have the packing materials made of NBR, so Max. Temperature is 80℃
Material ST'D Option (Specify by model code)
Body SUS304 (ST'D) SUS316, SS316L, Teflon , PVC
Tapered tube Pyrex glass
Packing NBR (max. 80℃) Viton (max. 120℃) PTFE (max. 120℃)
Support AL.C PVC,PTFE
Cover Acryl
ConnectionStd. Rc1/2"
Opt. 1/2" NPT, JIS 10K FF etc.
Mounting
Std. Lock-nut mounting onto
panel front
Opt. Flange pipe mounting,
Stand provided etc.
Approx. weight (ST'D
type)1.5 kg
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 8 -
KOI-E-1 Series
KOI 유량계는 여러 가지 시험 장비 및 반도체 장비 등에 패널 설치용으로
사용됩니다. 이 유량계는 액체나 기체에 사용할 수 있으며 부식성 액체나
기체에도 재질을 선택할 수 있습니다. 적용대상에 따라 유량을 조정할 수
있는 니들 밸브 부착형등이 있으며 압력의 변화에도 적용할 수 있는 정유량
변 유량계도 있습니다. (Connection 거리가 280 mm입니다)
These panel-mounting flow meters are used in various testing
equipments and semi conductors. They are usable for both liquids and
gases. User have an option to pick suitable material for use with
corrosive liquids or gases. They have needle valve attached type which
can adjust flow rate according to application and types which can be
applied to pressure change.
(connection to connection : 280mm)
KOI-E-1
■ 구조 (Structure) 및 치수 (Dimension)
No. Title. Material.
1 Top Block SS304/316/316L
2 Bottom Block SS304/316/316L
3 Plate AL.C
4 Support Bar SUS304
5 Guide Bar SS304/316/316L
6 Screw Nut None.
7 Cap SS304/316/316L
8 Nut Set Brass
9 Glass Pyrex
10 Cover Acryl
11 Needle Valve SS304/316/316L
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 9 -
■ 유량 범위 (Flow Rate Table)
AIR(1atm.0℃) Water AIR(1atm.0℃) Alarm setting range WaterAlarm setting
range
5.0~50 NL/min 0.2~2.0 L/min 5.0~50 NL/min 10~40 NL/min0.3~3.0 L/min 0.6~2.4 L/min
10~100 NL/min 0.3~3.0 L/min 10~100 NL/min 20~80 NL/min
20~200 NL/min 0.5~5.0 L/min 20~200 NL/min 40~160 NL/min 0.5~5.0 L/min 1.0~4.0 L/min
30~300 NL/min 1.0~10 L/min 30~300 NL/min 60~240 NL/min 1.0~10 L/min 2.0~8.0 L/min
40~400 NL/min 1.5~15 L/min 40~400 NL/min 80~320 NL/min 1.5~15 L/min 3.0~12 L/min
50~500 NL/min 2.0~20 L/min 50~500 NL/min 100~400 NL/min 2.0~20 L/min 4.0~16 L/min
60~600 NL/min 3.0~30 L/min 60~600 NL/min 120~480 NL/min 3~30 L/min 6.0~24 L/min
■ Standard Specification
Measuring Object Liquids and gas
Measuring
Range
Air Min. 5 ~50 NL/min.
Max. 60~600 NL/min. · Air at 0℃, 1atm
Water Min. 0.2~2.0 L/min.
Max. 3.0~30 L/min.
Range ability 10:1
Accuracy ±3% F/S
Max. Oper. Press. 10 kgf/㎠G (0.98MPaG)
Max. Oper. Temp. 120℃ Standard products have the packing materials made of NBR, so Max. Temp is 80℃
Material Std. Option (SS316,SS316L)
Body SUS304 (STD') SUS316, PVC
Tapered tube Pyrex glass
Packing NBR (max 80℃) Viton (max 120℃) EPDM (max 80℃)
Support SUS304
Cover Acyle
ConnectionStd.
PT3/8", NPT3/8"
NPT1/2", PT 3/4" PT1"
Opt. JIS10KFF etc.
Mounting
Std.
Lock-nut mount onto
panel front
Bezel installation,
Panel-rear installation
Opt. Stand provided Flange
pipe tube installation
Weight
(std. type) 4.0 kg
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 10 -
KOI-JW Code. Description.
Material
S SUS304, SUS316
P PVC
TV PTFE (With Valve)
T PTFE (Without Valve)
Connection
1 PT 1/2” 150mm
2 PT 3/4” 150mm
3 PT 1” 160mm
OptionR1 1 SPDT Alarm (Reed S/W)
R2 2 SPDT Alarm (Reed S/W)
KOI-JW Series
KOI-JW 유량계는 판넬 설치및 배관내 취부가 가능하며
협소한 공간에서도 유량계을 설치할 수 있습니다. 콤팩
트형으로써 소유량에서 대유량까지 측정범위가 넓으므로
반도체 장비등에 사용 적합하며 , Teflon 이나 PVC 제
작되어 초순수, 화학약품, 부식성이 있는 액체,기체등에
넓게 사용할 수 있습니다.
(Connection 거리가 150 mm입니다.)
KOI-JW series can install in panel or process pipe.in additional it doesn’t require a large space for installation. it has wide flow range from low flow to large one. goods that is made with teflon, PVC are suitable for ultrapure-water, chemical field, corrosive liquids or gases.(Connection to connection : 150 & 160mm)KOI-JW-S-R1 KOI-JW-TV
■ Model Code
■ 구조 (Structure) 및 치수 (Dimension)
PT 1/2"
PT 3/4"PT 1" Title. Material.
BodySUS,
TEFLON or PVCL 150 160
Support Bar SUS
L2 190 200Float
SUS,
TEFLON or PVC
C 30 35 Needle Valve SUS,
TEFLON or PVC
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 11 -
■ Standard Specification
Measuring Object Liquids and gas
Measuring
Range
Air Min. 5 ~50 NL/min.
Max. 80~800 NL/min. · Air at 0℃, 1atm
Water Min. 0.2~2.0 L/min.
Max. 8~80 L/min.
Range ability 10:1
Accuracy ±2% of F.S Gas (±2.5% of F.S)
Max. Oper. Press. 10 kgf/㎠G (0.98MPaG)
Max. Oper. Temp. 120℃ Standard products have the packing materials made of NBR, so Max. Temperature is 80℃
Material ST'D Option (SS316,SS316L)
Body SUS304 (ST'D) SUS316, PTFE, PVC, ETC.
Tapered tube Pyrex glass
Packing NBR (max. 80℃) Viton (max. 120℃) EPDM (max. 80℃)
Support SUS304
Cover Acyle
ConnectionStd.
PT3/8", NPT3/8"
NPT1/2", PT 3/4" PT1"
Opt. JIS 10K FF etc.
Mounting
Std.
Lock-nut mounting onto
panel front
Bezel installation,
Panel-rear installation
Opt. Stand provided Flange
pipe tube installation
Weight
(ST'D type) 4.0 kg
■ 유량 범위 (Flow Rate Table)
AIR(1atm.0℃) Water (PTFE) Water (SUS) Alarm setting range
5~50 NL/min 1.0~10 L/min 1.2~12 L/min 2.4~10 L/min
8~80 NL/min 1.5~15 L/min 1.5~15 L/min 3.0~12 L/min
10~100 NL/min 2.0~20 L/min 2.0~20 L/min 4.0~16 L/min
20~200 NL/min 3.0~30 L/min 3.0~30 L/min 6.0~24 L/min
30~300 NL/min 4.0~40 L/min 4.0~40 L/min 8.0~32 L/min
40~400 NL/min 4.5~45 L/min 4.5~45 L/min 9.0~36 L/min
60~600 NL/min 5.0~50 L/min 5.0~50 L/min 10~40 L/min
80~800 NL/min 6.0~60 L/min 8.0~80 L/min 28~68 L/min
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 12 -
KV Series
KVS-B KVS-GV KVF-B KVS-B-R1
KV 유량계는 유량계 부착 및 배관에 있어서 여러 종류의 다양한 제작 사양으로 사용자의 요구를 충족할 수 있는
형식입니다. 접속 방향, 방법 또한 부품의 교환 조립 등의 호환성을 고려해서 설계했으며 정도, 안정성 모두 우수
한 유량계입니다.
KV series that is made by various specification can satisfy on customer's needs. that is superior for accuracy,
stability, safety.
■ Model Code
KV Code. Description.
ConnectionS Screw
F Flange
Material
B SUS304
C SUS316
P P.V.C
T PTFE
Size
8 PT(1/4") Fe (Application on B.C.P.T TYPE)
10/15 PT 3/8" or 1/2" Fe
20 PT 3/4" Fe
25 PT 1" Fe
40 PT 1-1/2" Fe
50/65 PT 2" Fe
OptionR1 1SPDT Alarm (Reed S/W)
GV Valve (32A이상 Gate Valve, 25A이하 Needle Valve)
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 13 -
■ 구조 (Structure) 및 치수 (Dimension)
NO Title. Mat'l Size L(mm)Valve 삽입
L(mm) ≑
10A 230 (70) 3001 Body
SS304, SS316,
PVC, PTFE
15A 280 (75) 355
2 Cover AL, SS304
20A 320 (80) 400
3 Glass Pyrex
25A 380 (85) 465
4 FloatSS304, SS316,
AL, Acetal 40A 420 -
5 Union Cap SS304, AL 50A 450 -KVS-B-□
NO Title. Mat'l Size L(mm)
1Bottom
Body
SS304, SS316,
PVC, PTFE10A 280
2 Cover AL, SS304 15A 300
3 Top BodySS304, SS316,
PVC, PTFE20A 340
4 Union Cap SS304, AL 25A 380
5 FloatSS304, SS316,
AL, Acetal40A 420
6 Tube Pyrex 50A 450KVF-B-□
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 14 -
Size.H2O Flow Rate (L/min) AIR Flow Rate (NL/min)
Standard
(L/min)
Extended Flow
(L/min)
Standard
(NL/min)
Extended Flow
(NL/min)
10A 0.15 ~ 1.50.2 ~ 2.0
2.0 ~ 253.0 ~ 30
0.2 ~ 2.5 3.0 ~ 350.3 ~ 3.0
4.0 ~ 40
5.0 ~ 50
15A 0.35 ~ 3.5
0.4 ~ 4.0 6.0 ~ 600.5 ~ 5.0 6.0 ~ 700.6 ~ 6.0 20 ~ 2000.6 ~ 7.0
8.0 ~ 80
10 ~ 1002.0 ~ 20 10 ~ 120
20A 0.8 ~ 8.0
1.0 ~ 10 10 ~ 1501.0 ~ 12 20 ~ 2001.0 ~ 15 40 ~ 4001.0 ~ 17
20 ~ 25020 ~ 290
4.0 ~ 40 50 ~ 500
25A 2.0 ~ 202.0 ~ 27 30 ~ 3505.0 ~ 50
30 ~ 30040 ~ 400
32A 3.0 ~ 303.0 ~ 35 80 ~ 8004.0 ~ 40 60 ~ 6008.0 ~ 80
50 ~ 50060 ~ 700
40A 5.0 ~ 506.0 ~ 60 150 ~ 15006.0 ~ 70 100 ~ 100015 ~ 150
80 ~ 800100 ~ 1200
50A 8.0 ~ 8010 ~ 100 200 ~ 250010 ~ 120
100~ 1500200 ~ 2000
20 ~ 250 400 ~ 4000
65A 10 ~ 15020 ~ 20040 ~ 400
■ 유량범위 (Flow Rate Table)
■ 표준 사양 (Standard Specification)
Measuring Object Liquid and gas
Range ability 10:1 Accuracy ±2% of F.S GAS ± 2.5 % F.S
Max. Oper. Press. 10 kgf/㎠G (0.98MPaG)
Max. Oper. Temp. 120℃ Standard products have the packing materials made of NBR, so Max. Temperature is 80℃
Material ST'D Option ( SS316/SS316L/TEFLON/PVC)Body SUS304 SUS316, TEFLON, PVC
Tapered tube Pyrex glassPacking NBR (max. 80℃) Viton (max. 120℃) Support SS304
ConnectionStd. PT 1/4"
Opt. PT1/8",3/8",1/2", NPT, JIS10KFF etc.
Mounting
Std. Pipe mounting
Opt.
Panel mounting by attached metal
fitting or Flange mounting etc.
General quantity
(ST'D type)1.0 kg (1/2")
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 15 -
Purge set (Flow Meter With Constant Flow Valve)
정유량변과 미소유량측정용 Flow Meter를 조합한 것으로, 압력변동이 있어도 내부
의 다이아프램이 항상 일정한 유량을 공급할 수 있어서 정확한 Level 측정 및 비중
측정, 정유량 설정 등을 할 수 있습니다.
When working pressure change, inside diaphragm and needle valve operates in
order to always keeping a fixed flow rate for exact measurement of constant
flow setting, level, density.
KP Series
■ 사양 (Specification)
1. 정 도 (Accuracy) : ±2% of F.S
2. 최고 내압한도 (Max. Operating Pressure) : Max. 10kgf/cm²G (10kgf/cm²G Option)
3. 최고 내열한도 (Max. Operating Temperature) : Max. 120°C (300°C이상 Option)
4. 사용차압 범위 (Operating Differential Pressure Range) : 0.5~3kgf/cm²G, 0.3~3kgf/cm²G,
0.6~4kgf/cm²G, 1~5kgf/cm²G
■ 작동 원리 (Operation Principle)
입구(1차) 변동 압력 제어 방식에서 일정하지 않은 압력의 유체는 입구로부터 정유량밸브의 하단 chamber까지 유
입 됩니다. 그리고 상단의 chamber에 2차 압력이 전달됩니다. 이 때 상, 하단의 chamber사이에서 발생되는 차압
은 스프링과 다이아프램의 역할에 의해 항상 일정하게 됩니다. 니들밸브에 의해 교차되는 차압은 항상 일정하게
유지되며 유량은 밸브의 조절에 의해서만 비례합니다. 출구(2차) 변동 압력 제어 방식에서는 반대의 구조로 출구
의 압력이 변하여도 역시 유량은 항상 일정하게 유지됩니다.
In the PRIMARY(INLET) PRESSURE VARIATION CONTROL TYPE, the fluid, of which inlet pressure varies, is introduced from
IN to the lower chamber of the C series Constant Flow Valve. The load pressure (Secondary pressure) is connected to the
upper chamber. The differential pressure between the lower chamber and the upper chamber is always constant thanks to
the function of the Spring and the Diaphragm. The differential pressure across the needle valve is kept always constant
and the flow rate of the fluid is proportional only to the opening of needle valve. The opposite action is taken for
SECONDARY (OUTLET) PRESSURE VARIATION CONTROL TYPE and the flow rate is kept also constant even when the load
pressure changes.
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 16 -
■ 적용사례
● SUPPLY PRESSURE VARIATION ● LEVEL MEASUREMENT
위 그림에 나타나듯이 하나의 메인에서 각각 분기되는 경우 분기관중 정지된 곳의 영향으로 공급 압력은 변화합니다. 이때 입구 변동 압력 제어 방식은 퍼징된 유량을 유지하는데 적합니다.
탱크의 하부로 토출되는 압력은 액체 레벨에 의해 변화하며 일정한 공기유량을 필요로 합니다. 그러므로 출구 변동 압력 제어 방식은 이런 경우에 적합하며 압력측정을 위해 압력계 대신 차압발신기가 종종 설치됩니다.
As shown above, in case one large supply line branches
into several lines and the supply pressure changes because
of stoppage of some branches. Primary Pressure Variation
type Purge set will be suitable in keeping the purging
volume of fluid.
Liquid level in tanks is measured by the Back-pressure at
the edge of purging pipe. The outlet pressure at the tank
bottom changes depending on the liquid level, and
constant bubbling is required. Thus, Secondary Pressure
Variation type purge set is used for this application. A Dp
transmitter is often connected to pressure line instead of
pressure gauge for remote transmission.
Recommended Model of Purgeset : KP2-KOI Series Recommended Model of Purgeset : KP3-KOI-PN Series
● PURGING FOR ORIFICE PLATE APPLICATION ● DENSITY MEASUREMENT
차압 방식에 의한 측정중 고형물질이 도압관에 유입되어 측정을 방해하지 못하도록 하기 위한 이중 Purge의 예.
위 그림은 탱크내부 액체의 지속적인 밀도 측정을 위해 적용된 공기 Purge 방식을 보여주고 있다.
For the measurement of flow rate of corrosive liquids
and/or liquids with solids by orifice plate, an equal
pressure purging both to High and Low pressure parts so as
not to introduce liquid and/or solids into Dp by pass line.
Dual mount type purge set used.
For continuous measurement of density of liquid in tanks,
Air purging system is used as shown above.
Recommended Model of Purgeset : KP3-KOI-PN Series Recommended Model of Purgeset : KP3-KOI-PN Series
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 17 -
KP1 Series ( Purge set )
■ Model Code
KP1-KOI Code. Description.
Connection
Length
A 130mm
C 200mm
Material
1 SUS304
2 SUS316
X Special
OptionIN Inlet Control
OUT Outlet Control
● Inlet pressure variation control type ● Outlet pressure variation control type
KP1-KOI-A-1-IN KP1-KOI-A-1-OUT
KP1-KOI-C-1-IN KP1-KOI-C-1-OUT
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 18 -
■ 표준 사양 (Standard Specification)
∎ Model Identification : IN Inlet pressure variation control type
OUT Outlet pressure variation control type
∎ Available Flow Ranges :
Gases : Max. 4L/min (nor) *1
Max. Oper. Press. : 1.0MPa (10kg/cm²G)
Temp. : Max. 120°C
Min. Required DP : 0.03MPa (0.3kg/cm²G)
Max. Controllable DP : 0.3MPa (3kg/cm²)
Control Accuracy : ±3% of F.S
*1 : Air, 0°C, 1atm
∎ Material Construction
Part NameMaterial
Standard Option
Body SUS304 Aluminum, SUS316
Diaphragm CR VITON
Spring SUS304 SUS316
Seal NBR VITON, PTFE
∎ Standard Process Connection : Rc1/4" Thread
■ Constant valve Drawing
The left figure show Type KPO-KOI-IN which is the primary
pressure fluctuation type.
For Type KP1-KOI-OUT of the secondary pressure fluctuation
type, the direction of "IN" and "OUT" gets reverse, and the
height shall be 45mm instead of 45mm.
왼쪽 그림은 입구 변동 압력 제어 방식의 KP1-KOI-IN 을 보여
주고 있습니다.
출구 변동 압력 제어 방식의 KP1-KOI-OUT은 입구와 출구의 방
향이 반대로 바뀌게 됩니다.
그리고 입구의 센터에서 출구의 센터까지 길이는 KP1-KOI-
IN은 45 mm, KP1-KOI-OUT는 45 mm 입니다.
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 19 -
KP2 Series (Purge set)
■ Model Code
KP2 Code. Description.
IndicatorKOI Glass Tube Indicator
KMS Metal Tube Indicator
Connection
Length
A 130mm of KOI Series
C 200mm of KOI Series
D 240mm of KOI Series
MF 180mm of KMS Series
Material
1 SUS304
2 SUS316
X Special
OptionIN Inlet Control
OUT Outlet Control
■ 표준 사양 (Standard Specification)
∎ Model Identification : Inlet pressure variation control type
Outlet pressure variation control type
∎ Available Flow Ranges :
Liquids : Max. 2L/min *1
Gases : Max. 50L/min (nor) *2
Max. Oper. Press. : 1.0 MPa (10kg/cm²G)
Temp. : Max. 120°C
Min. Required DP : 0.06MPa (0.6kg/cm²G)
Max. Controllable DP : 0.4MPa (4kg/cm²)
Control Accuracy : ±3% of F.S
*1 : Water (Density 1.0g/cm², Viscosity 1.0cP) *2 : Air, 0°C, 1atm
∎ Material Construction
Part NameMaterial
Standard OptionBody SCS14 -
Diaphragm CR VITONSpring SUS304 SUS316Seal NBR VITON
∎ Standard Process Connection : PT 1/4" Thread
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 20 -
■ 구조 (Structure) 및 치수 (Dimension)
Inlet Pressure Variation Control Type (Also used for Outlet Pressure Variation in liquid applications)
KP2-KOI-A-1-IN
Possible Scale Ranges as Purge Set
KP2-KOI-C-1-IN
Possible Scale Ranges as Purge Set
Water Min. 0.003~0.03L/min. Water Min. 0.007~0.07L/min.
Max. 0.4~2 L/min. Max. 0.2~2 L/min.Air Min. 0.1~1 NL/min. Air Min. 0.1~1 NL/min. (0°C, 1atm) Max. 5~50 NL/min. (0°C, 1atm) Max. 5~50 NL/min.
Inlet Pressure Variation Control Type (Also used for Outlet Pressure Variation in liquid applications)
KP2-KOI-D-1-IN
Possible Scale Ranges as Purge Set
KP2-KMS-MF-1-IN
Possible Scale Ranges as Purge Set
Water Min. 0.003~0.03L/min. Water Min. 0.007~0.07L/min.
Max. 0.4~2 L/min. Max. 0.2~2 L/min.Air Min. 0.1~1 NL/min. Air Min. 0.1~1 NL/min. (0°C, 1atm) Max. 5~50 NL/min. (0°C, 1atm) Max. 5~50 NL/min.
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 21 -
Outlet Pressure Variation Control Type
KP2-KOI-A-1-OUT Possible Scale Ranges as Purge Set KP2-KOI-C-1-OUT Possible Scale Ranges as Purge Set
Air Min. 0.1~1 NL/min. Air Min. 0.1~1 NL/min.
(0°C, 1atm) Max. 5~50 NL/min. (0°C, 1atm) Max. 5~50 NL/min.
Outlet Pressure Variation Control Type
KP2-KOI-D-1-OUTPossible Scale Ranges as Purge Set KP2-KMS-MF-1-OUT Possible Scale Ranges as Purge Set
Air Min. 0.1~1 NL/min. Air Min. 0.1~1 NL/min.
(0°C, 1atm) Max. 5~50 NL/min. (0°C, 1atm) Max. 5~50 NL/min.
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 22 -
KP3 Series (Purge Set)
■ Model Code
KP3 Code. Description.
IndicatorKOI Glass Tube Indicator
KMS Metal Tube Indicator
Connection
Length
A 130mm of KOI Series
C 200mm of KOI Series
MF 180mm of KMS Series
Material
1 SUS304
2 SUS316
X Special
OptionS Single Type
D Dual Type
■ One Purge
● Block Diagram of System ● Dimension
This is dimension of Wall or panel mounting type. U-bolt fixture is
provided for U-bolt installation type.
Panel Mount Purge Flow Meter & Purge Set
인천비전기업 / 인천유망중소기업 / 한국남부발전 정비적격업체
(주) 플 로 우 닉 스
T E L : 82-32-579-2999
E-MAIL : [email protected]
- 23 -
■ 표준 사양 (Standard Specification)
Type : Secondary pressure variation control type (Single loop)
Supply air : Max. 0.99MPaG (9.9kg/cm²G)
Primary press. : To be adjusted to 0.06MPa (0.6kg/cm²G) higher than the maximum of secondary press.
Secondary press. : 0.06MPa ~ (0.6kg/cm²G ~ )
Possible scale range : Min. 0.1 ~ 1 NL/min. Max. 5 ~ 50 NL/min.
Indication accuracy : ±2.5% of F.S.
Control accuracy : ±3% of F.S.
Process connection : PT 1/4" thread Other threads on request
Installation : Std. Wall/panel mounting Opt. U bolt installation type
■ Dual Purge
● Block Diagram of System ● Dimension
This is dimension of Wall or panel mounting type. U-bolt
fixture is provided for U-bolt installation type.
■ 표준 사양 (Standard Specification)
Type : Secondary pressure variation control type (Dual loop)
Supply air : Max. 0.99MPa (9.9kg/cm²G)
Primary press. : To be adjusted to 0.06MPa (0.6kg/cm²G) higher than the maximum of secondary press.
Secondary press. : 0.06MPa ~ (0.6kg/cm²G ~ )
Possible scale range : Min. 0.1 ~ 1 NL/min. Max. 5 ~ 50 NL/min.
Indication accuracy : ±2.5% of F.S.
Control accuracy : ±3% of F.S.
Process connection : PT 1/4" thread Other threads on request
Installation : Std. Wall/panel mounting Opt. U bolt installation type