pace qualification specifications - defence …cradpdf.drdc-rddc.gc.ca/pdfs/unc84/p66036.pdf ·...
TRANSCRIPT
•MOO MW ~ Oncarporated .
STUDY o fSPACE QUALIFICATION
SPECIFICATIONS
PART 2 of 2
CONTRACT No 36001-9--3594/01--aV
Issue : A
April 17, 1990
pathways in Technology, Engineering and Scienc e
TEL (613) 592-0748FAX (613) 592-6553
,329 March RdSi i~
1e 202
Kanata OntanoCanada, 0K ?E 1
20/04/90Provided - Class
0
CARDNUMBER 1000 DOCUMENT CAL 351 - P
TITLE: EHF Satcom Study Briefing
AGENCY/AUTH : Canadian Astronautics Ltd
REFERENCES
ABSTRACT Directly applicable study for EHF, pesented as viewgraph presentatio n
CLASS Design SOURCE Commercia l
---------------------------------------------------------------------
SCOPE Overview description of EHF design, including system-
tradeoffs
08/04/90Provided
•CARDNUMBER 100 1
TITLE : EMC Requirements for Space Systems
AGENCY/AUTH : DOD U.S .Air Forc e
REFERENCES
ABSTRACT
CLASS Testing
DOCUMENT MIL-STD 1541 A
SOURCE Military
----------------- .. .. ..-------------------------- ._----- ..--_------------SCOPE
0
08/04/90Provided
•CARDNUI4B ER 1002 DOCUMENT MIL-STD-810 D
TITLE: Environmental Test Methods and Engineering Guidelines
AGENCY/AUTH : DOD U .S .
REFERENCES MIL-S 901, MIL-STD-167, MIL-STD-210, MIL-STD-781, MIL-STD-1165, M
ABSTRACT Compendium of test methods to be tailored for the specific appli c
CLASS Testing SOURCE Military
-----------------------..- .. .. .. ..------------- ..------- ------ . . ..----------SCOPE 1 .1 This Standard provides :
a . Guidelines for conducting environmental engineering tasks totailor environmental tests to end-item equipment applications .
b . Test methods for determining the effects of natural and inducedenvironments on equipment used in military applications .
1. .2 Application of this standard early in the development phase ofthe aquisition process is encouraged . Selected application atother points in the acquisition process may be appropriate . Themethods of this standard are not all-inclusive . Add .iti.onal,envir.onments or combinations of environments should be included inthe environmentsl test specificat:ion when appropriate . The testmethods of this standard are intended to be applied in support ofthe following objectives :
a . To disclose deficiencies and defects and verify correctiveactions .b . To assess equipment suitability for its intended operat .ional .environment .c . To verify contractual compliance .
1 .2 Limitations This standard does not address the following :
a . Electomagnetic interferenc eb . Lightning and magnetic effect sc . Nuclear weapc;is and nuclear weapons effect sd . Piece parts such as bolts, wire, transistors and IC'se . Tests of basic materialsf . Certian aspects of the safety testing of munitions, such asrough handling tests. '
08/04/90Provided
•CARDNUMBER 1003 DOCUMENT MIL-HDBK-217 E
TITLE: Reliability Prediction of Electronic Equipment
AGENCY/AUTH: DOD U.S .
REFERENCES There are four pages of referenced documents
ABSTRACT Prepared in cooperation with industr y
CLASS Program SOURCE Military
----------------------------------------------- ..---------------- .----SCOPE 1 .1 This handbook establishes uniform methods for predicting the
reliability of military electronic equipment and systems . Iprovides a common basis for reliablity predictions czuringaquisition programs for military electronic systems and equipment .It also establishes a common basis for comparing and evaluatingreliaoility predictions of related or competitive designs .
1 .3 Computerized reliability predictionRADC-ORACLE available at cost for use on specific contract s
Contact RA[)C/F2I3ET Griffiss AFB NY 13441-5700
08/04/90Provided
•CARDNUMBER 1004 DOCUMENT MIL-HDBK-47 2
TITLE: Maintainablilty Prediction
AGENCY/AUTH : DOD U.S .
REFERENCES
ABSTRACT Aids in the design development and production of equipment
CLASS Program SOURCE Military
--------------------------------------------------------------------
SCOPE Not of direct use for equipment that cannot be maintained bycor.ventional methods .
This procedure is used to predict system downtime of airborneelectronic and electro-mechanical systems involving modularreplacement at the flight line .
04/04/90
0
CARDNUMHER 1005 DOCUMENT Volume 7 1
TITLE : Space Systems and their Interaction with Earth's Space Environme
AGENCY/AUTH : Progress in Astronautics and Aeronautics
REFERENCES
ABSTRACT Current book on space environment and spacecraft interactions
CLASS Design SOURCE AIAA
------------.. ..-------------------------_._---------------------------SCOPE Environmental effects of Space System s
Effects of Microwave Beams on the IonosphereUpper Atmosphere Modifications Due to Discharges of Water Vapourfrom Space Launch Vehicle ExhuastsModification of the Ionosphere by Large Space VehiclesArgon-Ion Contamination of the Plasmaspher eMagnetospheric Modification by Gas Releases from Large SpaceStructure sSpacecraft Charging : a ReviewSpacecraft Charging During Eclipse PassageOccurrence of Arcing and its Effects on Space SystemsSurface Discharge Effects
DOCUMENT MIL-STD 1540B
TITLE : Test Requirements for Space Vehicles
AGENCY/AUTH: Dept of Airforce U .S .
REFERENCES MIL-STD 1541 ,
ABSTRTCT Definitions of tests to be tailored for all space equipment
CLASS Testing SOURCE military
--------- ..------------------------------------- . . ..--------------------SCOPE 1 .1 This standard establishes uniform definitions,
enviromental criteria, test requirements, and test methods forspace vehicles and thier subsystems and components .
1 .2 The tailored application of theses test requirements to aparticular space program is intended to ensure a high level ofconfidence in achieving a successful space mission . This standardis intended for use in the procurement of space vehicle hardware,including space vehicles and airborne support equipment thatremain in the Space Shuttle Orbiter during orbital flight, as wellas orbital satellits .
1 .3 The tests specified herein are c1ass .if .iEd as development,qualification, acceptance, prelaunch cvalidation or other tests .
CARDNUMBER 1007 DOCUMENT MIL-E 8983 B
TITLE: Mil Spec for Electronic Equipment Extended Space Environment
AGENCY/AUTH: DOC.? U .S .
REFERENCES MIL-14 371, MIL-B-5087, MIL-C-5541, MIL-N-7513, MIL-S7742, MIL-A-8Plus other s
ABSTRACT Good top level specification for the design of space hardware
CLASS Design SOURCE Military
-----------------------------------------------------------------------
SCdP E This specification sets forth the general requirements forthe design and manufacture of electronic equipment forunmanned space vehicles . The detailed performance andindividual test requirements shall be as specified in theequipment specification or contract .
DOCUMENT MIL-STD-45662 A
TITLE : Calibration System Requirements
AGENCY/AUTH : DOD U.S .
REFERENCES
ABSTRACT Specifies calibration system s
CLASS Testing SOURCE Military
------------------------------------------------------------------- -SCOPE 1 .1 This standard provides for the establishment and
maintenance of a calibration system to control the accuracy of themeasuring and test equipment used to a .:sure that supplies andservices presented to the government for acceptance are inconformance with prescribed technical requirements .
9
CARDNUMBER 1009 DOCUMENT MIL-STD-758 Br'
TITLE : Reliability Program for Systems « Equipment Development & Produc
AGENCY/AUTH : DOD U.S .
REFERENCES MIL-RDBK-217, MIL-STD-105, MIL-STD-721, MIL-STD-781, MIL-STD-965
ABSTRACT General requirement, not just space top leve l
CLASS Program SCURCE Military
-----------------_--------------__---_------------------_-------------
SCOPE 1 .1 This standard provides general requirements and specific ta sksfor reliability programs during the development, production, andinitial deployment of systems and equipment .
DOCUMENT FED-STD-209 3
TITLE : Clean Room & Work Station Requirements Controlled Environments
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
----------------------------- ..- ..------------- ..---- .. ..--------.._------
DOCUMENT GSFC-S-700-42
TITLE: Connectors Elec . Rectangular. Power & Coaxial Contacts for Spac e
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
--------..-----------------------------------------------------------SCOPE
CARDNUMBER 1012 DOCUMENT GSFC-S-700-42/ 2
TITLE: Connectors, Electrical Rectangular Polarised Shell, for Spac e
AGENCY / AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
----..--------------------- - --------------- ..-------------------------
SCOAE
CARDNUMBER 1013 DOCUMENT GSFC-S-700-42/ 2
TITLE : Contacts, Power, Coaxial, Removable, for Electrical Connector s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
------- -------------------------------------------------------------
SCOPE
08/04/9 0
CARDNUMBER 101 4
TITLE: ESA Software Engineering Standard
AGENCY/AUTH : European Space Agency
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT ESA SSC (84) 1
..------------------------ .. ..-----------------------------------------
SCOPE
CARDNUMBER 1015 DOCUMENT MIL-STD-975 E
TITLE: NASA Standard Elec . Electronic & Electromechanical Parts Lis t
AGENCY/AUTH : DOD U .S .
REFERENCES
ABSTRACT
CLASS SOURC E
--------------------------------------------------------------------
SCOPE
CARDNUMBER 1016 DOCUMENT
TITLE : Report on Orbital Debri s
AGENCY/AUTH : Interagency Group for Nat . Security Council 1989
REFERENCES
ABSTRACT
CLASS SOURCE
--------- -------------------------------------------------- ..--------
SCOPE
CARDNUMBER 101 7
TITLE: GSFC Aerospace Standards
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT X-560-63-2
SCOPE
CARDNUMHER 101 8
TITLE : CTS Test Plan
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT CTS-3100- 1
SOURCE
----------------------------------------------------------------------
SCOPE
CARDNUMBER 101 9
TITLE : IRÎG Telemetry Standards
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT 106/7 1
SCOPE
04/04/9 0
CARDNUMBER 102 0
TITLE: IRIG Document Antenna Patterns
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLAS S
SCOPE
SOURCE
DOCUMENT 106/61
DOCUMENT NUB 5300-4 (1C )
TITLE : Inspection System Provisions for Aeronautical & Space Syste m
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
_ ..------------------------------------------------- ..____-- ..._-----___
SCOPE
CARDNUMBER 1022 DOCUMENT NHB 8060-1A
TITLE : Flammability, Odar & Offgassing Requirements & Test Procedures
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
--------------------------------------------------- -----------------SCOPE
04/04/9 0
CARDNUMBER 1023 DOCUMENT 15 M 0000 2
TITLE : Elec . Electronic & Electromechanical Parts Program Requirement s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
--------------------------__-__----- .--------__-------_- ..------------
SCOPE
04/04/9 0
.
CARDNUMBER. 1024 DOCUMENT MSFC-SPEC-52 1
TITLE : EMC Requirements on Spacelab Payload Equipment
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
04/04/9 0
CARDNUMBER 1025 DOCUMENT MSFC-SPEC-52 2
TITLE : Design Criteria for Controlling Stress Corrosion Cracking
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
DOCUMENT MSFC-HDBK-52 7
TITLE : Material Selection for MSFC Spacelab Payload s
AGENCY / AUTY :
REFERENCES
ABSTRACT
CLASS SOURCE
--------------------------------- ----SCOPE
DOCUMENT JA 31 (78-13 )
TITLE : MSFC Letter, Subjects Dynamic Environ . Design & Test Criteri a
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
--------------------- ..------------------------ ..----------------------
SCOPE
DOCUMENT JSC 0268 1
TITLE : Material Design Guidelines & Test Data Handboo k
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
CARDNUMBER 1029 DOCUMENT JSC 1112 3
TITLE : Space Transportation System Payload Safety Guidelines Handbook
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
--------- ..----------------------------------------- ..-----------------
SCOPE
CARDNUMBER 1030 DOCUMENT SPR-R-002 2
TITLE: General Specification, Vacuum Stability Requirements of Polymer i
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
--------------------- ..- ..-----------------------------.._ .._-------------SCOPE
08/0ti/90Provided
•CARDNUMBER 1032
PRECEDING PAGE BLAN K
DOCUMENT MIL-STD-461 C
TITLE: Electromagnetic Emission & Susceptibility, Cotitrol of EM I
AGENCY/AUTH: DOD U.S .
REFERENCES MIL-E-6051, MIL-STD-285, MIL-STD-462, MIL-STD-463, MIL-STD-480,MIL-STD-•704, MIL-STD-1377(NAVY), MIL-STD-1385(NAVY),MIL-STD-1512(USAF), MIL-STD-1541(USAF), MIL-STD-1542(USAF),
NAT-STD-3516, NAT-STD-3614, NAT-STD-365 9
MIL-HDBK-235, MIL-HDBK-237, MIL-HDBK-241, MIL-HDBK-253AFSC DH 1-4, AFSC DH 2-5, AFSC DH 2- 7AMC Pamphlet 706-23 5 , AMC Pamphlet 706-41 0
ABSTRACT
CLASS Design SOURCE MIL STD
------------ ..--------------------------------------------------------
SCOPE This Standard establishes the documentation and designrequirements•for the control of the electromagnetic emission an d
• susceptibility characteristics of electronic, electrical andelectromechanlcal equipment and subsystems (as defined herein)designed or procured for use by activities and agencies of theDepartment of Defense . Such equipment and subsystems may be usedindependantly or as an integral part of other subsystems orsystems .
08/04/90Provided
0
CARDNUMBER 1033 DOCUMENT MIL-STD-46 2
TITLE : Electromagnetic Interference Characteristics, Measurement o f
AGENCY/AUTH: DOD U.S .
REFERENCES MIL-STD-461, MIL-STD-463,
ABSTRACT
CLASS Design SOURCE Mil Std
-----------------------------------------------------------------------SCOPE This-standard establishes techniques to be used for th e
measurement and determination of the electromagnetic interference
characteristics (emission and susceptibility) of electrical,electronic, and electromechanical equipment, as required by
MIL-STD-461
CARDNUMBER. 1034 DOCUMENT NHB 1700-7 A
TITLE : Safety Policy & Standards for Payload using the ST S
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
CARDNUMBER 103 5
TITLE : STS Payload Ground Safety Handbook
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT KHB 1700- 7
SCOPE
04/04/9 0
CARDNUMBER 1036 DOCUMENT MSFC SPEC 52 2
TITLE: Design Criteria for Controlling Stress Corrosion Checking
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
04/04/9 0
0
CARDNUMBER 103 7
TITLE : MMS Electrical System SPEC
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT GSFC S-700-1 4
SCOPE
04/04/90
40CARDNUMBER 10 2 8
TITLE : Solar Cell Radiation Handbook
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT JPL DOC #82-6 9
---------------------..----------------------------------------------SCOPE
04/04/9 0
CARDNUMBER 103 9
TITLE : MMS Mechanical System SPEC
AGENCY/ AYJTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT GSFCS-700-1 3
SOURC E
--- ..------------------------------------------------- ..--------------
SCOPE
0
CARDNUMBER 1040 DOCUMENT GSFC S-700-4 0
TITLE : MMS Electromagnetic Compatibility SPEC
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
04/04/9 0
CARDNUMBER 1041 DOCUMENT NSS-HP-1740- 1
TITLE: NASA Aerospace Pressure Vessel Safety Standard
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLAS S
SCOPE
SOURCE
04/04/9 0
0
CARDNUMBER 1.042 DOCUMENT G SFC S-700-4 2
TITLE : MMS Connectors, Electrical Rectangular for Spaceflight us e
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
SCOPE
04/04/9 0
•CARDNUMBER 1043 DOCUMENT JSC 1404 6
TITLE : Payload Interface Verification Requirement s
AGENCY / AiJTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
04/04/9 0
•CARDNUMBER 1044 DOCUMENT GSFC 731-0005-8 3
TITLE : General Fracture control. Plan for Payloads Using ST S
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLAS S SOURC E
-------------------------------------------------------------------
SCOPE
DOCUMENT SPAR DOC#258585 3
TITLE: Radarsat Environmental & Test SPEC
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
SCOPE
SOURCE
4)
04/04/9 0
CARDNUMBER 1046 DOCUMENT SPAR DOC#258584 7
TITLE: Radarsat Safety Engineering Requirment s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
SCOPE
CARDNUMBER 104 7
TITLE: PCM Telecommand STD ESA TTC-A--01
AGENCY/AUTH : European Space Aqency
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT ESA TTC-A-0 1
----------------------__-----------------------------------------------SCOPE
04/04/9 0
0
CARONUMBER 104 8
TITLE : PCM Telemetry Standard
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT ESA TTC-A-0 2
SCOPE
CARDNUMBER 1049 DOCUMENT ESA TTC-B-0 1
TITLE: Spacecraft Data Handling Interference Standards
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
---- ..- ..-------------------------------------------------------------
SCOPE
CARDNUM$ER 1050 DOCUMENT ASTM E 595-7 7
TITLE: Total Mass Loss & Collected Volatile Condensable Material s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
04/04/90
•CARDNUMBER 1051 DOCUMENT NHB 5300-4
TITLE : Requirements for Electrical Soldered Connections
AGENCX/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
---------------------------------------------- ..-..-------------------SCOPE
CARDNUMBER 105 2
TITLE: Soldering Electrical Connections
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT NASA SP- 5 00 2
SCOPE
04/04/9 0
CARDNUMBER 1053 DOCUMENT X-764-71-314
TITLE : A Compulation of Low Outgassing Polymeric Material s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
CARDNUMBER 105 4
TITLE: NHB 1700-1 (U1 )
AGENCY/AUTH: Basic Safety Requirements
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT
..---..----------------- --------------- ..------------------------------
SCOPE
06/04/9 0
0
CARDNUMBER 1055 DOCUMENT S-320-G- 1
TITLE: General Environmental Test Specification for Spacecraf t
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
DOCUMENT NATO AQAP- 6
TITLE : Measurements & Ga .lzbration Sy stem Requirements for Industry
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
04/04/9 0
CARDNUMBER 1057 DOCUMENT JFK GP 359
TITLE : Liquid Propeiiants Safety Handboo k
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
04/04/9 0
0CARDNUMBER 105 8
TITLE : Handling Hazardous Materials
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT NASA SP-503 2
SCOPE
04/04/90
•CARDNUMBER 1059
TITLE : Microwave & Radar Hazards Handbook
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT JFK SP 4-42- S
SCOPE
04/04/90
CARDNUMBER 1060 DOCUMENT NASA tN D-714 1
TITLE : Apollo Experience Report Spacecraft Pyrotechnic ^yyste m
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
------------------------------------------------------------------------SCOPE
04/04/9 0
•CARDNUMBER 1062
PRECEDING PAGE BLAN K
DOCUMENT SPAR # 258585 3
TITLE: Radarsat Environmental Design & Test Specificatio n
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
10/04/9 0
•CARDNUMBER 1063 DOCUMENT MIL-STD-48 3
TITLE : Configuration Management Practices for Systems, Equipment
AGENCY/AUTH : DOD U .S .
REFERENCES DOD-D-1000, MIL-Q-9858, MIL-L-9931, MIL-P-15024, MIL-I-45208, MIL-S-83490, DOD-STD-100, MIL-STD-129, MIL-STD-130,DOD-STD-480, MIL-ST
D-481, MIL-STD-482, MIL-STD-490, MIL-STD-499, MIL-STD-1167, MIL-STD-1168, MIL-STD-152 1
ABSTRACT
CLASS SOURCE
------------------------------------------------------------------ .--
SCOPE 1 .1 This standard establishes requirements for configuration
management .
08/04/90
0CARDNUMBER 1064
TITLE : Specification Practices
AGENCY/AUTH: DOD U.S .
REFERENCE S
ABSTRACT
CLASS SOURCE
DOCUMENT MIL-STD-49 0
SCOPE
04/04/90
0CARDNUMBER 1065
TITLE: Explosives Safety Handbook
AGENCY/AUTH :
REFERENCES
ABSTRACT
CL'4SS SOURCE
DOCUMENT JFK GP-46 9
SCOPE
08/04/9 0
0
CARDNUMBER 1066 DOCUMENT MIL-HNBK 235 1A
TITLE : Electromagnetic Environment Considerations for Desigr & Procure m
AGENCY/AUTH : DOD U.S .
REFERENCES
ABSTRACT
CL?'&SS SOURCE
------- -------------------------------------------------------------
'SCOPE
08/04/9 0
•CAP'.i)NUMBER 1067 DOCUMENT MIL-HNDB-237A
TITLE: Electromagnetic compatibility Management Guide for Platforms ,
AGENCY/AUTH : DOD U.S .
REFERENCES
ABSTRACT
CLASS SOURCE
------ - ---------------•-------------------------------------- .----SCOPE
44/04/9 0
•CARDNUMBER 1 0 68 DOCUMENT ASTM E268-84 A
-TITLE : Electromagnetic Testing, standard Definitions of Term s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
__- ...__ - --_-_--_-_.--------------------------- -_____--__---____-_ - --__
SCCJPE
04/04/9 0
•CARDNUMBER 1 0 69 DOCUMENT NAT-STD-351 6
TITLE : Electromagnetic Compatibility for Aircraft Ele.c .&Elctronic Equi p
AGENCY/AUTH :
REFERENCES
ABSTRACT
CI.,ASS SOURC E
-----------------------------------------------------------------------
SCai`'E
08/04/90
0
CARDNUMff3ER 1071 .
TITLE : Electromagnetic Compat . (EMC) and Grounding Requir . for Space Sys
AGENCY/AUTH : DOD U .S . USAF
REFERENCES MIL-E-4158, MIL-F-15733, MIL-STD-188-124, MIL-STD-220A,
MIL-STD-285, MIL-STD-461, MIL-STD--462, MIL-S`.rD-463,
MIL-STD-889,MIL-STD-1541,MIL-HDBK-419
NACSIM 5203 (C), NACSEM 5204 (C )
pRrC[D1N G PAGE BLAN~;
DOCUMENT MIL-ST.7-1542 A
A t3 S'I't2AC'l '
CLASS Design SOURCE Mil Std
SCOPE The purpose of this standard is to specify tl ;,e design, performanceancl verification requirements for electrical subsystems for spacesystem facilities, including electromagnetic compatibi.l it:y ( E MC.),electrical power clr.ounding, bonding, shielding, lightnin gprotection, and r.C'l.,,MPk Fa'.I' secur ity . These reclu irement.s areinterre]_atcc:l and interdependent, and therfore rcctuire a ndir.teqrszted approach in the design .
04/04/90
- 19.::ARDNïJME3FR :L 073 DOCUMENT ANCI C95-- 3 -7 3
r.,"ITLE : Radiation, Electromagnetic, Potentially Hazardou s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CI:.,Af3S
SCOPE
SOURCE
08/04/9 0
CARDNUMBER - 1.ü 74 DOCUMENT MIL-S•°8357 6
TITLE : Solar Cell Arrays, Space Vehicle, Design & Testing, Ground Spec .
AGENCY/AU'CH : DOD U .S .
REFERENCES
ABSTRACT
CLASS SOURC E
SCOPE
04/04/9 0
•CARDNUMBER 1 07 5
TITLE: Particulate Matter in the Atmospher e
AGENCY / AUTFi :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT ASTM T)1704 -713
SCOPE
04/04/9 0
0
CARDNUMBER 1.076 DOCUMENT ARP 78 5-•6 3
TITLE : Particle Contamination of air in dust Controlled Spaces
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLAS S
SCOPE
SOURCE
04/04/9 0
•CARDtdUMBER 1 0 77 DOCUMENT A STM E722-8 0
TITLE : Electronics, Radiation Hardness Test of Determining Neutron Ene r
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOt.I12CP,
-----------------------------------------------------
SCOP E
04/04/9 0
•CARDNUMBER 1 078 DOCUMENT ASTM E7 20 -8 0
TITLE : Electronics, Selection of Neutron Activation Foil s
AGENCït / AUTH :
REFERENCES
ABSTRACT
C%aASS
SCOPE
SOURCE
10/04/90
0
CARDNUMBER 1079 DOCUMENT MIL-STD-1686A
TITLE : Electrostatic Discharge Control Program for Protection
AGENCY/AUTH : DOD U .S .
REFERENCES MIL- E-17555, MIL-STD-785, MIL-STD-1285, DOD-HDBK-263
ABSTRACT
CL.ASS SC7UI3Ci :̂
----------------------------------------- ----------------------------
SCaPE 1 .1 The purpose of this standard is to establish therequircments for an E S D control prcacjram to minimize the effects o fESD on parts, assemblies, and equipment . An effective E S1.7 controlprogram wi1.l increase reliability, decrease maintenance actionsand lifetime cost . This standard may be tailored for various typesof acquisistions .
08/04/9 0
•CARDNUMBER 1080 DOCUMENT MIL--A-17161 D
TITLE : Absorber, Radio Frequency Radiation, General Specification for
AGENCY/AUTH: DOD U . S .
REFERENCES
ABSTRACT
CL.ASS SOURCE
------------------------------------------
SCOPE
AM&
10/m4/9 0
ECARDNUMSER 1081 DOCUMENT MIL-STD-1621A
TITLE : Acoustical & Vibrational Standard Reference Quantities
AGENCY/AUTH : DOD U .S .
REFERENCES
ABSTRACT
CLASS SOURCE
---------------------------------------------------------------------
SCOI'E 1 .1 This standard covers reference quantities to be used inreporting of all acoustical and vibrational quantiti_e ., expressedin terms of levels . it also defines acoustical terms an dprescribes the plott4g format for acoustical measurements .
CARDNUMBER 1 0 82 DOCUMENT MIL HNDBK 5 E
TITLE: Aerospace Vehicle Structures, Metalic Materials & Elements f or
AGENCY/AUTH: DOD U .S ., also FAA Wright Patterson AFB
REFERENCES
ABSTRACT Comprehensive manual for the use of metal in aerospace structures .The data is presented in two volumes and they are quite large . Thedata is for detailed design .
CLASS L)esig n SOURCE Mil Handbook
--------------------------------------------------------------------
SCUPI~~. This document is intended pri.mari.l.y as a source of desig nallowables which are those strength properties of metallicmaterials and elements (primarily fasteners) that are widely usedin the design of aerospace structures . This document also containsinformation and data for other properties and characteristics ,such as .f rac.t:ur. e toughness strength fatigue strength, creep:;trcngth, rupture stroncjth, fatigue cracking propaqati.on rate andresistance to stress corrosion cracking . The use of this type ofinformation is not manadatory, Those properties presented a sdes icIn allowables are listed as A and B or S values . Data forother properties are presented as typical .
DOCUMENT ASTM E349-7 2
TITLE: Standard Definitions of Terms Relating to Space Simulatio n
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLAS S SOURCE
SCOPE
04/04/90
0CARDNUMBER 1084 DOCUMENT ASTM E 434-7 1
TITLE : Standard Test Method for Calorimetric Deter . of Hemispherica l
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
-------------•---- ---------------------------------------------------
SCOPE
04/04/90
CARDNUMBER 1085 DOCUMENT ASTM-E49 0
TITLE : Standard Solar Constant & Air Mass Zero Solar Spectral Irradianc
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
---------------------------------------- ....--------.. ..-------------•---SCOPE
0
04/04/9 0
0CARDNUMBER 1086 DOCUMENT ASTM-491-7 3
TITLE: Standard Practice for Solar Simulation for Thermal Balance Tes t
AGENCY / AUTH :
REFERENCES
ABSTRACT
CLASS
SCOPE
SOURCE
0
04/04/9 0
•CARDNUMBER 1087 DOCUMENT ASTM-E512-7 3
TITLE : Standard Practice for Combined, Simulated Space Envir . Testing
ACENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
0
04/04/9 0
CARDNUMBER 10 8 8 DOCUMENT ElA 365-6 9
TITLE : Performance Test Procedure for Solar Cells & Cal . Procedure
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
06/04/9 0
0CARDNUMBER 1089 DOCUMENT IEEE C95 .1-8 2
TITLE : Safety Levels with Respect to Human Exposure to Radio Frequency
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
----------------------------------------- ..--------------------------SCOPE
0
04/04/9 0
0CARDNUMBER 1090 DOCUMENT IEEE C95 .5-8 1
TITLE : Recommended Prctice for Measurement of Hazardous Electromagnetic
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
-------------------------------- ..------------------------------------
SCOPE
06/04/9 0
0CARDNUMBER 1091 DOCUMENT ASTM E834-8 1
TITLE : Standard Practice for Determining Vacuum Chamber Gaseous Envir .
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
- .» ..----------------------- .. ..----------------------------------------SCOPE
04/04/9 0
0
CARDNUMBER 1092 DOCUMENT Plastec R12-6 2
TITLE : Effects of Space Environment on Plastics
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
06/04/9 0
•CARDNUMBER 1093 DOCUMENT SAE AMS 3084A-8 6
TITLE : Lubricant Space Appplications, Minimal Outgassin g
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
-------------------------- ..-..---------------------------------------SCOPE
0
04/04/9 0
CARDNUMBER 1094 DOCUMENT IPCTM-6502 .6 .48 6
TITLE : Outgassing Multilayer Printed Wiring Boards Test Methods Manua l
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
---------- - -----..------------------------ ..--------------------------SCOFE
04/04/9 0
•CARDNUMBER 1095 DOCUMENT ASTM F1227-8 9
TITLE: Standard Test Method for TotalLoss of Materials and Compensatio n
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
--------------------------------------------- ------ -.----------------
SCOPE
0
06/04/9 0
0
CARDNUMBER 1096 DOCUMENT SAE AIR 1167-7 0
TITLE : Environmentai Criteria & Tests for. Aerospace Ground Equipment
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
--------------------------------------------------- ..------------------SCOPE
04/04/9 0
•CARDNUMBER 1097 DOCUMENT ASTM E668-7 8
TITLE : Standard Practice Foil the Application of Thermolumi .nescence
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOLTI:CL
-------_------------ ...-..----------_ .._------------- --------------------------SCOPE
04/04/90
0CARDNUMBER 1098 DOCUMENT ASTM E720• - 8 6
TITLE: Standard Guide for Selection of a Set of Neutron Activation Foi l
AGENCY / AUTiï :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
04/04/90
0
CARDNUMBER 1099 DOCUMENT ASNT 101Sec14-5 9
TITLE: Electronic Radiation Sources Nondestructive Testing Handboo k
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLAS S
SCOPE
SOURCE
----------------------------------------
06/04/90
0CARDNUMBER 110 0
TITLE: Radiation Detection & Recording
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLAS S
SCOPE
SOURCE
DOCUMENT ASNT 1 28 Sec4-8 5
-------------------------------------------
DOCUMENT IEEE C95-3- 7 3
TITLE: Techniques & Instrumentation for the Measurement of Potential s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
06/04/9 0
CARDNUMBER 1102 DOCUMENT ANS 6 .4 .2-8 5
TITLE : Specification for Radiation Shielding Mater~als
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
SCOPE
SOURCE
06/04/90
•CARDNUMBER 1103 DOCUMENT ASTM F 25-6 8
TITLE : Standard Test Method for Sizing & Counting Airborne Particulat e
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
-•-,------------------------------------------------------------------
SCOP E
•
-04/04/90
•CARDNUMBER 1104 DOCUMENT ASTM E251-8 6
TITLE : Standard Test Methods for Performance Charac . of Bonded Resista n
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
---------------------- ..-..---------------_-,--..------- ..---------------SCOPE
04/04/9 0
•CARDNUMBER 1 105 DOCUMENT IEEE 4-7 8
TITLE : Standard Techniques for High Voltage Testin g
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
-----------------------
SCOPE
SOURCE
04/04/90
•CARDNUMBER 1106 DOCUMENT
TITLE: S/C Environmental Design & Test Specificatio n
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
-------------------------------------- ..-- ..------------_-------------
SCaPE
04/04/90
•CARDNUMBER 1107 DOCUMENT
TITLE: S/C General Design & Interface Requirements
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
--------------------------------------------------------------------
SCOPE
04/'04/9 0
0
-CARDNUMBER 110 8
TITLE: Development Plan
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT
SOURC E
-----_- ..-------- ...- ...------ - ------- ..--..- ------------------------------SCOPE
CARDNUMBER 1109
TITLE: PA Plan
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT
SOURCE
---- ..------------------------------------------------------®--------
SCOPE
0
04/04/90
•CARDNUMBER 1110 DOCUMENT
TITLE : Product Assurance Requirements on Sub Contractor s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
.,-..----------------..-- ..-----------------------------_ ..---------------SCOPE
04/04/9 0
0CARDNUM^" ~ 111 1
TITLE : Approved Materials & Processes
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT
..---..----..-------------------------------------------- ..------_-----_ wSCOPE
04/04/9(1
ECARDNUMBER 111 2
TITLE: EGSE Requirements Specification s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT
---------------------------------------------------------------------
SCOPE
DOCUMENT
TITLE : MGSE Requirements Specifications
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
-..-..- ..--------------------------------------------_------------------
04/04/90
•CARDNUMBER 111 4
TI'CLE : Ground Station PA Plan
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT
SOURCE
--------..----------------------------------- ..- ..--..------------- ..----SCOPE
04/04/9 0
0
CARDNUMBER 1115 DOCUMENT
TITLE : Launch Vehicle Interface Requirement s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLA,SS SOURC E
------- .----------------- ..-- ..--------------------------- I-------------SCOPE
04/04/9 0
•CARDNUMBER 1116 DOCUMENT
TI TLE : EGSE & Check-out Software Specii:icatior.
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
-------------------------------------------------------- .------------
SCOPE
04/04/9 0
0
CARDNUMBER 111 7
TITLE : AIT & Verification Plan
AGENCY/AUTH :
REFERENCES
ABSTRACT
Cr.,ASS
DOCUMENT
SOURCE
SCOPE
08/04/90Provided
0CARDNUM$ER 1 1 18 DOCUMENT MIL-STD-889 B
TITLE: Dissimilar Metal s
AGENCY/AUTH : DOD U .S .
REFERENCES MIL-S-8802
ABSTRACT
CLASS Design SOURCE Mil St d
--------------------------------------------------------- - ----------
SCOPE This Standard defines and classifies dissimilar metals, andestablishes requirements for protecting coupled dissimilarmetals, with attention directed to the anodic member of thecouple, against corrosion .
PRECEDING PAGE BLAN K
DOCUMENT TES/LC/43610
TITLE : Satellite Test Requirements
ACENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
------------------------- ..--------_------_-..------------------------SCOPE
04/04/9 0
0
CARDNUMBER 112 1
TITLE: Test Facilities Plan
AGIENCY /AUTii :
REFERENCES
ABSTRACT
CLASS
DOCUMENT PLN/LCS/4385 1
SOURC E
----------- ------------ ..--------------------------------------------SCOPE
CARDNUMBER 1122 DOCUMENT TTC-B-O1 (ESA )
TITLE: S/C Data Handling Interface Standards
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
-----------------------------------.-------- ..--..---------------------
SCOPE
04/04/9 0
•CARDNUMBER 112 3
TITLE : PCM Telecommand Standard
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT ESA-PSS-4 5
SOURCE
----- ------------------------------------- ..-------------------------SCOPE
04/04/90
•CARDNUMBER 112 4
TZTLE! PCM Telecon ►mand Standard
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT ESA-PSS-4 6
SOURCE
-------------.--------- ..----- ----------------------------------------
SCOPE
0
04/04/9 0
•CARDNUMBER 11 2 5
TITLE : Telemetry Cading Standards
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT TTC-A-03(ESA)
SCOPE
04/04/9 0
•CARDNUMBER 112 6
TITLE: Ranging Standard
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT TTC-A-04 ESA
SCOPE
04/04/9 0
0
CARDNUMBER 112 7
TITLE : Radio Frequency Modulation Standard s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT TTC-A-05 ESA
---------------------------------------------------- ..--------..-------
SCOPE
04/04/9 0
CARDNUMBER 1128 DOCUMENT ESA-PSS-2 5
TI'- E : Specification for Silicon Solar Cell s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
08/04/9 0
•CARDNUMBER 112 9
TITLE : ESA Software Engineering Standards
AGENCY/AÜTH: European Space Agency
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT ESA BSSC ( 84 )
-----------------------------------------------------------------------SCOPE
04/04/9 0
0
CARDNUMBER 1130 DOCUMENT K-STSM-14 .1RevB
TITLE : Launch Site Accommodations HandbooY for STS Payload
AGENCY/AUTHt
REFERENCES
ABSTRACT
CLASS SOURCE
-------------- ..--------------------------------------..-----------SCOPE
04/04/9 0
•
CARDNUMBER 113 1
TITLE : Payload Integration Plan
AGENCY/AUTH :
REFERENCES
ABSTRACT
Cl .ASS
DOCUMENT (STS/Payload )
SOURCE
---------------------------------------------- .------- ..---__---------
SCOPE
04/04/90
~
CARDNUMBER 1132 DOCUMENT NHB 1700 .1(V1-A )
TITLE : Safety Policy & Requirements for Payloads Using the STS System
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
--- .»------------------..--.----------------..---------------- ..---------
SCOPE
04/04/9 0
•CARDNUMBER 11.33 DOCUMENT
TITLE : STS/Payload Interface Control Document
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
SCOPE
04/04/90
isCARDNUMBER 113 4
TITLE : STS Reimbursen,ent Guide
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT JSC 1180 2
SCOPE
04!04/50
•CARDNUMBER 113 5 DOCUMENT SD77-SH-0214 A
TITLE : Space Transportation System Models Configuration Management/Cont
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
------ - ------..--- ..--------------------------------------------------
SCOPE
04/04/9 0
0CARDNUMBER 1136 DOCUMENT JSC 184 6 8
TITLE : Mission Integration Control Board Configuration Management Proc .
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
--.. ..---..--------------------------------------------------....---------SCOPE
04/04/9 0
•CARDNUMBER 1137 DOCUMENT JSC 1436 3
TITLE : Shuttle/Payload Integration Activities Pla n
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
----------------------------------------------------------------SCOPE
04/04/90
•CARDNUMBER 1138 DOCUMENT JSC 0770 0
TITLE : Space Shuttle System Payload Accommodation s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
SCOPE
SOURCE
.
04/04/9 0
CAFJ)NUMBER 1139 DOCUMENT JSC 14686,Jan 7 9
TITLE : Criteria/Guidelines for Payload Thermal Math . Models for Integrat
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
---------------------------- -------------------------------------------SCOPE
04/04/9 0
0CARDNUMBER 1140 DOCUMENT MSFC-STD-512A
TITLE : Requirements for Weightless Environment
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
-04/04/9 0
0CARDNUMBER 114 1
TITLE: EVA Description & Desiq, . Criterial.
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLAS.i SOURCE
DOCUMENT NASA/ JSC 1061 5
SCOPE
04/04/9 0
•CARDNUMBER 1142 DOCUMENT GSFC-S-700-42/ 1
TITLE: Connectors, Electrical Rectangular, Polarized Shell for Space F l
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
------------------------------------------------------------------- ---SCOPE
04/04/9 0
0CARDNUMBER 1143 DOCUMENT GSFC-S-700-42/ 2
TITLE : Contacts, Power & Coaxial Removable, for Electrical Connector s
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
--------------------------------------------------------------------SCOPE
DOCUMENT MIL-STD-83575A
TITLE: Wiring Harness,Space Vehicle,Design & Testing (See DOD-W-83575A )
REFERENCES MIL-C-17, MIL-W-'5088, MIL-W-5846, MIL-C-38999,MIL-C-39012, MIL-C-55544, MIL-W-81044, MIL-W-81381, MIL-C-83723, MIL-C-83733, MIL-STD-143, MI]~•-STD-86 3
ABSTRACT
CLASS SOURCE
---------------------------------------------------------------------
SCOPE This specification covers the general design and testingrequirements for electrical wiring harnesses and cables that areto be installed in space vehicles .
08/04/90
0CA^'--"',JMBER 1145 DOCUMENT MIL-C-3899 9
TITLE: Connector, Electrical, Circular, Miniature, High Density ,
AGENCY/AUTH: DOD U.S .
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
os/o4/9 0
CARDNUMBER 1146 DOCUMENT MIL-C-8372 3
TITLE : Connectors, Electrical, Circul.ar, (environment resisting )
AGENCY/AUTH : DOD U .S .
REFERENCES
ABSTRACT
CLASS SOURCE
SCOPE
04/04/9 0
0CARDNUMBER 114 7
TITLE : Armament Design Handbook
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT AFSC DH2- 5
SCOPE
04/04/90
CARDNUMBER 114 8
TITLE: EMC Design liandbook
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT AFSC DH-1- 4
SOURCE
----..-_-..-- .._ ..------------------------------------------------------
SCOPE
04/04/9 0
•CARDNUMHER 114 9
TïTLE: Range Safety Manual
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT AFWTR 127--].
SCOPE
S}9/04/y 0
CARDNUMBER 1150 DOCUMENT MIL B-5087B(ASG)
TITLE : Bonding, Elec . and Lightning Protection for Aerospace Sywtems
AGENCY/AUTH : DOD U .S .
REFERENCES MIL-L-6806, MIL-STD-143, MS25083, MS33586, MS35337, MS 3 5339, AN526, AN735, AN742, AN935, AN960, NAS679, NAS68 0
ABSTRACT
CLASS SOURCE
----- ------------------------- ..---- ..----------------------------------SCOPE 1 .1 This specification covers the characteristics,
application, and testing of electrical bonding (see 6 .2 .2) for
aerospace systems, as well as bonding for the installation and
interconnection of electrical and elecronic equipment therein, and
lightning protection .
08/04/9 0
•CAR.D2diINiBER 1151 DOCUMENT MIL E-60 51 D
TITLE: Elect romagnetic Compatibility Requirements Systems (Amendment 1 )
AGENCY,+' AUTH : DOD U .S .
REFERENCES MIL-C-5, MIL-B-5087, MIL-0-11693, MIL-C-12889,MIL-C-15733, MIL-l'--2401 4MIL-STD-454, KIL-S':t'D-461, MIL-STD-462, MIL-STD-704, MIL-STD-831,MS25384, M59029 8AFSM 80-7, AFSCM 80-9 VOL 1V
ABSTRACT
CLASS Design SOURCE DOD US
-------------_------ ..- W - . . ..- ..--- ..------..---------------------------------SCOPE This specification outlines the overall requirements for systems
electromagnetic compatibility, including control of the systemelectromagnetic environment, lightning protection, staticelectricity, bonding and grounding, It is applicable to completesystems, i.ncluding all associated subsystems/equipments .
08/04/9 0
0- CARDNUx+SBER 1153
PRECEDiNG PAG E BLAN K
DOCUMENT MIL-STD-8' 3
TITLE : Minimization of Hazards of Electromagnetic Radiation to Electro n
AGENCY/AUTH : DOD U .S .
REFERENCES
ABSTRACT
CLASS SOURCE
---------------..----------_- ..------ - ----_--- .. -----_-..---_------SCORE
04/04/9 0
CARDNUMBER 1154
TITLE : .,referred Finishes
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT
SCOPE
09/04/9 0
0CARDNUMBER 1156
PRECEDING PAGE BLAN K
DOCUMENT MIL--STD-151 2
TITLE : Electro Explosive Subystems Flec . Initiated, test Methods & Des i
AGENCY /ALTTH : DOD U .S .
REFERENCES MIL-B-5087, MIL-E-5400, MIL-E-6051, MIL-E-8189, MIL-E-8983, MIL-I-
23659, FED-STD-595, MIL-STD-171, MIL-STD-186, VAIL- -STD-202, MIL-STD
-331, MIL-STD-453, MIL-STD-454, MIL-STD-461, MIL-STD-681, MIL-STD-709, MIL-STD-810 ,MIL-STD-863, MIL-STD-882, MI1.,-^TD-14'72, MS5170 0
ABSTRACT
CLASS SOURCE
SCOPE 1 .1 The purpose of this document is to establish uniformdesign and. qu<<V-f ication requirements and test methods for thedesign, development, and acceptance of all electroexplosivesubsystems and component parcs .
08/04/9 0
CARDNUMBER 115 7 DOCUMENT MIL-STD-C-554 1
TITLE : Chemical Conversion Coatings on Aluminum & Aluminum Alloy s
AGENCY/AUTH : DOD U.S .
REFERENCES
ABSTRACT
CLASS SOURCE
-------------------------------------------------------------------------SCOPE
04/04/9 0
0CARDNUMBER 1 15 8
TITLE : Payload Verification Reqisirements
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
------------------------- -------------------
DOCUNiENT JSC 14046,Rev a
SCOPE
04/04/9 0
0CARDNUMBER 1 :159 DOCUMENT K-CM-04 . 2
TITLE : Instructions for KSC CP Configuration Control Board tJperation s
AGENCY / AUTt-i :
REFERENCES
ABSTRACT
CLASS SOURC E
-----------------------------------------------
SCOPE
04/04/9 0
CARDNUMBER 1160 DOCUMENT JSC 169 7 9
TITrLEa Shuttle Orbitor Failure Modes & Effects Associated with Standard
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURC E
------------- ..----------------------------------------------- -------SCOPE
04/04/9 0
eCARDNUMBEP 116 1
TITLE :
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT GSFC-S -311 Pg . 4
SOURCE
-------------------------------.----- ..-.------------------------------SCOÉ E
04/04/9 0
goCARDNUMBER 116 2
TITLE :
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT GSFC--S•-311 Pg .1 1
SCOPE
04/04/9 0
•CARDNUMBER 116 3
TITLE :
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT rSFC-S-311 Pg .12
SOURC E
--------------------- ....---- -------- ------------- -------------------..-SCOPE
04/04/9 0
eCARDNUMBER 1164
TITLE :
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT GSFC-S-311 Pq . 1 3
SOURC E
------------- .___-__-_._--------------------------- ..---_-_--_--_------
SCOPE
18/04/90Provided - Class
sCARDNUMBER 1165 DOCUMENT CAL 35 1
TITLE: Military Comsat Orbit Investigation
AGENCY/AUTH : Canadian Astronautics Ltd
REFERENCES
ABSTRACT Trade-off study of effectivness of orbits for milsatcomCompleted in 198 5
CLAS S, Design SOURCE Commercia l
-----------------------------------------------------------------------
SCOPE ?rade-off analysis of generic orbitsMolniya 8 and 12 hou rCircular inclined geosynchronousGeostationaryElliptical inclined geosynchronousCircular polarNear pola rElliptical inclined non-synchronousPeriod greater than 24 hours
O4/n4/9 0
•CARDNUMBER 1 1 6 6
TITLE :
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT GSFC-S-311 Pg .1 5
SOURCE
--------------------------------------------------------------------------SCOPE
04/04/9 0
CARDNUMBER 116 7
TITLE :
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT GSFC-S-311 Pg .1 6
:̀ 73 OURCE
-----------------------------------------------------------------------
SCOPE
08/04/90Provided
0CARDNUMBER 1158 DOCUMENT MIL-STD-1472 C
TITLE : Human Engineering Design Criteria for Military Systems
AGENCY/AUTH : DOD U .S .
REFERENCES Includes four pages of references to Mil Specs for lighting, soundpressure, et c
ABSTRACT Only useful for design of equipment which will be used by directinteraction with humans, this would include ground support andmission support equipment . Not of relevance to free flyingspacecraft .
CLASS Design SOURCE Mil Std
----------------- ..--- . . .. ..------ --------------------------------------SCOPE This standard establishes general human engineering design
criteria for military systems, subsystems equipment andfacil .i .ties .
10
08/04/90Provided
•CARDNUMBER 1169 DOCUMENT MIL-HDBK-23 A
TITLE : Structural. Sandwich Composites
AGENCY/AUTH : DOD U .S . & FAA
REFERENCES
ABSTRACT Standarizaticn handbook, used by design engineers .
CLASS Design SOURCE Mil Handbook
----------------------------------------------------------------------SCOPE Mil handbook 23 ha s been pi: e pareca for the use in the des j design of
structural sandwich composite :;, primarily for tii.cfht vc:.al7icl(I ., .:Information presented includes desiqn procedures, fabricationmethods, inspection procedures, and repair techniques for boicl)mi ] .itary and commercial. vehicles, Methods and procedures oI:.hc?rthan those given herein are a :.l .so acceptable>, provided they gi.vc'.romparable results or are properly subtantiated .
08 /04/90Provided
•CARDNUMBER 117 0 DOCUMENT MIL-HDBK-I,7 A
TITLE : Plastics for Aerospace Vehicles
AGENCX/AUTH: DOD U .S . & Faa
REFERENCES
AH.STRACT Standardi.zati.on handbook for design engineers
CLASS Design SOURCE Mil Handboo k
SCOPF' 1 .1 .1 The purpose of this handbook is to (1) provide a
0
standardized bt:s .is acceptable to the Air Force, Navy, the Army andthe T'AA, for the design and constructi . :'.i of fiber reinforcedplastic co :,,posi.tos primarily for aerospace vehicles . (2) toprovide appropriate data on the mechanical prc>pc~rti.cs- of suchcomposite-, and (3) to provide ri.~sicln techniques and analyticalprocedures whicli account for the anisotropy of these comosites andpermit computation of direc:tionat. properties . These designtechniques are provided for guideline purposc:s, and shall not bet.-ont;tru~.ad as rerlui.rerments unless spccifical . .ly identi.f iu.cl in ac.ontract .
0
09/04/9 0
eCA.f2DNUMBER 11 . 7 1 DOCUMENT MIL-STD-152 2
TITLE: Standard General Requirements for Safe Design and Operation
AGENCY/AUTH : DOD U .S .
REFERENC FS 4 pages of references
ABSTRACT
C%ASS SOURCE
-------------- -----------------------------------------------âCOF E 1 .1. This standard is to be used for the design of all
pressurized systems for missiles, space vehicles, and groundsupport equipment . The sources for design standards are forreference pulr:posG;, only, and to place the specific designstandard in its proper perspective, 1-11hoi.r_ inclusion in thisdocument does not imply total appl icabi lii:y to any contract onwhich thie, standard may be required unless rr.orau .i_rernentJ arespecifically stated .
-09/04/9a
sCAF!DNUMBER 1 1 72 DOCUMENT MIL-STD-13O F
TITLE : Identification Marking o f US Military Property
AGENCY/AUTH: DOD U .S .
REFERENCES DDD-L-20, MIL-E-1, M :[L-f3°-18, MIL-N-7513, MIL-B-10 1 54, MIL-M-13231,MIL-L-15040, M :I L-N- 1 8307, MIL-E-2 19 8 1 , MIL--M-385 1 0, MIL-P-83497 ,
FED-STD-182, FED-STD-183, FI:U-S'I'I)--184, ï'EU-ST!)-185, MIL-STD-190, M:IL-S7'i)--1168, MIL-STI)--1285, MIL°-S`I'I)-1473 ,
ABSTRACT
CLA SS
-----------------------------
SC)lJE2C:Na
SCOPE 1 .1 This standard provides the item marking requirements aw
meth(.)tls for. identification of items of military property produ<.oc1,
stocked, st:ored and issued by or for the I)opert;ment~ of i)efet7se .
Military items covered by the following documents are excluded
from the provisions of this standard unless otherwise specified in
detail SpeC:: ]. fiGati.o21s, standards, or contract .
09/04/90
0CAFnNUMHER 1173 DOCUMENT MIL-E--8383 8
TITLE : Electronic Eguipment, Aerospace, Extended Space. Environment, Ge n
AGENCY/AUTH :
REFERENCES MIL-M-3171, MIL-B-5087, MIL-C-5541, MIL-N-7513, MIL-S-7742, MIL-A-8625, MII,-V-14072, MIL-N-18307, MIL-C-3899 9 , MIL-C-3 9 012, MIL-M-45202, MIL-Ç-45743, MIL--I-°46058, MIL .-C-55544, MI.L-W-83575, MIL-C-83723, MIL-C-83733, MIL-STD-143, MIL-STD-454, M7L-f3`1 .'C}-81 0 , MIL-STI3-891, MII.,-S7D--151.2, MIL-S`1'1J-1539 ,
ABSTRACT
CLASS SOURC E
SCOPE 1 .1 This speci.fi.c:atiori sets forth the ~,4ener_a]. reciuiremenk:s forthe ri e ._,iqn and manufacture of Gl.ect.ron .i.c equipment for urimatanecispace vehicles . The detailed performance, and individual 1-lestreclu ï.rements shall be as specified in the equi.prrrr :r7tor che e:ontrac: k .
09/04/9 0
ECARDNÜMSER 1174 DOCUMENT MIL-F-833,4 2
TITLE< Forg~.ng, Titanium Alloys, for Aircraft and Aerospace Applicatio n
AGENCY/ AUTH :
REFERENC ES MIL-I-6866, MIL-I--8950,MIL-T-9047, MIL-H--81200
ABSTRACT
CLASS SOURCE
------------------------------------------------------------
SCOPI; 1 .1 This speci fTicai:ion covcr .: unalloynd ti .f~anit,ni and titanl .u ;iialloy fc,rgings :stditakale for aircraft and aerospace components .
1,
09/04/9 0
•CARDNUMBER 1175 DOCUMENT MIL-I`-7190I3
TITLE: Forgings, steel, for Aircraft/Aerospace Equipment and Specia l
AGENCY/AUTH :
REFERENCES MIL-H-6875, FES-STD-151, MIL-STD-163, MIL-STD-183, MIL-STD-1949, M
IL-STD-686 6
Ak3STRACT
CLASS SOUR C E
-_- ._------------------------------------------------------ -_
SCOI'E 1 . 1 This specif ic.at ion c.nvers steel fcax°rlinq s suitable for usein the construction of aircraft/aerospace equipment, specialordnance, and related accessories .
CARDNUMBER 1176 DO CUMENT MIL-M-38510 F
TITLE: Military Specificati.crn, Microcircuits, General . Spec . for
AGENCY/AUTH :
REFERENCES MIL-M-55565, FED-STD- 209, FED-STD-595, MIL-STD-129, MIL-STD -280, MIL-STD883, MIL-STD-976, MIL-STD 1331, MIL-STD-4566 2
ABSTRAC T
C: LA :3 S SC.)UI2C E
-----------------------------------------
SC;OPL 1 .I. 'Phis specification establishes the gencr.al requirementsfor monolithic, multichip, and hybrid microcircuits and the
qua].ity and reà.iabi .lity assux-~ance xequiremc.nts which rntast be motin the, acquisition of microcircuits . Dct_ai1 rcquircricrits, spc:e:iiict.;hi3l"i:1C;1:. .E?rl sl .t :i c :i of, microcircuits, and other provision .,.:; which aresensitive to the particular use intended shall be specified in theapp1ic:able device spec.ifâ.cation . Multiple levels of productasstdrnzace requirements and control are provided for in i.hiu,speci :E icat .i.on
09/04/90-
•CARDNUI4BER 117 7
TITLE: Test Requirements for Space Vehicle s
AGENCY/AUTH : DOD U .S .
REFERENCES MIL-STb-810, MIL-STD-1 .541
ABSTRACT
CLASS SOURCE
DOCUMENT MIL-STD-1540A
------------------------------------------- ----------
SCOPE 1 .1 This standard provides uniform definitions, criteri .a, andriencral 7_°ocla_iromrbnts for a space vehicle ground test program . Whenthese test rociuirc*mc.ntn are incorporated in detailed test plansfor particular space vehicles, a high level of confidence inacha.eving succ.o ;; :;ful space missions can be esta}7 .l.â. .>hecl .
09/04/9 0
0CARDNUMBER 1178 DOCUMENT MIL-aTD-810 D
TITLE: EnvirnnmenCa] Test Methods and Engineering Guidelines
AGENCY/AUTH : DOD U .S .
REFERENCES MIL-S-901, MIL-STD-167, MIL-STD-210,MIL-STD-781, MIL-STD-1165, MIL-STD-1540, MIL-STD-1670, MIL-STD-4566 2
ABSTRACT
CLASS :sOt .JRC Y.
SCOPE
09/04/9 0
0CARDNUMBER 118 0
PRECEDING PAGE BLAN K
DOCUMENT MIL-S-0045743 D
TITLE: Soderir.g, Manual type, High Reliability, Elect . & Electro . Equip
AGENCY/AUTH »
REFERENCES QQ-S-571, P4IL-F-14255, MIL-P-23809,MIL-P-46843, MIL-STD-202, MIL-S
TD-42 9
ABSTRACT
CL,AS S ::ï QURCi:
-------------------------------------------------------------SCOP£' 1.1 'I'h .ts ;,,pecrii:ic::<At,.ion covers :olderinq, high reliability
electrical and electronic c.onnecticnc, with rilaniml- ecalderinqapparatus as applicable to quided mi :~ :> .il.cs and certain aerospaceequipment requiring applicable to general soldering rcaquirement:s .
©9/04/9 0
0CARDNUMBER 1181 DOCUMENT MIL-S'(.'D-454K
TITLE: Standard Genera7. Requirements for Electronic Equipment
AGENCY/AUTH: DOD U.S .
REFERENCES MIL-I-983, MIL-E-4158, MIL-E-5400, MIL-E-8189, MIL-E - 8983, MIL-P-112 6 8, MIL-E-11991, MIL-E-16400, MIL-F-19870, MIL--T-21200, MIL-T-28800, FAA-G-210 0
ABSTRACT
CLASS SO11RCE
SCOPE
---------------------------------------------------------------
1. . 1 This standard co v~.~_- s the common r eqt?i.r. e :ne n ts to be u sed .inmilitary specifications for electronic equipment .
09/04/9 0
0CARDNUMBER 1182 DOCUMENT MIL-STD-1246A
TITLE : Product Cleanlines :s Levels and c.'ontamirtitvion Control Prograrr
AGENCY/AUTH : DOD U .S .
REFERENCES ;ED-°TD-209 . ASTM-F-24, ASTM-F-25, ASTM-D-2390, ASTM-D-2391, A,,TM-D-2429, ASTM--D-2544,SAE--ARP-598, SkE-_?iRF' .-74 3
ABSTRACT
CLASS SOURCE
--------------------- ---------------------------------------SC:7PE 1 . 1 This standard provides a basis and a unifor.-an method
spec,ifyin<<f product, c:leanlâness levols and contamination c°ont;z•ralprogram x c;qu i r emenl.s .
09/04/9 0
0GARDNUMBFR 11 83 DOCUMENT MIL-STD-151 5
TITLE: Fastener Systems for Aerospace Application s
AGENCY/AUTH : DOD U .S .
REFERENCES MS17855
AF3STRACT
C.Ï,AS S
SC'C)P !
SOURCE
------------------------------------------------1 .1 This standard covers the methods of fastening, materials,finishes, test methods, and hole size and criteria of fastenersand fastening systems used in the design and construction ofacrospacc system . In addition, it pr.rav .i.des a comprehensiveprcsE:ot;ation of approved engineering practices, procedures,processes, and characteristics for fasteners .
09/04/9 0
0
CARDNUMBER 1184DOCUMENT MIL-STD-470A
TITLE : Maintainability Program for Systems & Equipment
AGENCY/AUTH : DOD U .S .
REFERENCES MI L- S`,:'D-280, MIL-STD-471, MIL-STD-721, MIL-STD--785, MIL-STD-1388,
MIL-STD-1629, MIL-HDBK-47 2
ABSTRACT
CLASS SOURCE
------ ---------------------..--------
SCOPE 1 .1 This standard prcvides task descriptions for
maintainability programs . The Tasks, as tailored, will be applied
to systems and equipment development, acquisitions and
modifications . Software maintainability is not covered by this
standard .
09/04/90
CARDNUMBER 1185 DOCUMENT MIL-P-9024 G
TITLE: Packaging, Handling, and Transportability in System/Equip Acqui s
AGENCY/AUTH :
REFERENCES 3 pages
ABSTRACT
CLASS SOURC E
---------------------------------------------------- - ----------- ..---SCOPE 1 .1 This specification establishes packaging, materials
handling, and transportability requirements and criteria foracquisition of systems and equipment . It requires an interfacebetween these functions and the system engineering managementprocess as set forth in MIL-STD-499 and related configurationmanagement requirements contained in the applicable MIS-STD-480Jeries directives and MIL-STD-490 .
09/04/9 0
•CARDNUMBER 1.186 DOCUMENT MIL-T-28800 D
TITLE : Test Equipment for use with Elect . and Electro . Equipment
AGENCY/AUTH :
REFERENCES 3 pages of references
ABSTRACT
CLASS SOURCE
------------------------ ..-------------------------------------------
SCOPE 1 .1 This specification covers the general requirements fortest equipment, hereinafter referred to as the test equipment,(see 6 .4 .2 .15) used in testing electrical and electronicequipment . The test equipment may be of Military or commercial
design and includes general purpose, special purpose, peculiar,console mounted, and automatic test equipment (ATE) . Thisspecification should also be used for built-in test equipment(BITE) ( see 6 .4 .2 .6) when the requirements for built-in test (BIT)( see 6 .4 .2 .5) are not included in the system specification .
~ Detailed requirements for a particular test equipment should be
tailored in a detail specification for that equipment as specified
in 6 .5 (see 6 .4 .2 .12) .
09/04/9 0
0CARDNUMBER 11 .87 DOCUMENT MIL-STD-1653 A
TITLE : Power Cable Assenblies
AGENCY/AUTH :
REFERENCES W-C-596, MIL-C-3432, MIL-C-28777/5, MIL-T-28800, MS2548, MS3102, M
S3106, MS3107, MS3436, MS3507, MS9038 4
ABSTRACT
CLASS SOURCE
-----------------------------------------------------------------------SCOPE 1 .1 This standard specifies the configuration requirements of
input power cable assemblies for Organizational (f lightline) andIntermediate (shop) electronic test equipment, classified as TypeI in MIL-T-28800, and rated up to 10 amperes . It also shows therelevant connections for thest equipment and power sourcereceptacles .
0
09/04/90
CARDNUMBER 1 2,88 DOCUMENT MIL-STD-154 3
TITLE: Reliability Program Requirments for Space Missile Systems
AGENCY/AUTH: DOD U.S .
REFERENCES MIL-Q-9858, MIL-STD-280, MIL-STD-480, MIL-STD-721, MIL-STD-756, MI
L-STD-891, MIL-HDBK-21 7
ABSTRACT
CLASS SOURCE
--------------------------------------- - ------- I ----------- ..--------
SCOPE 1 .1 This standard establishes uniform reliability programpractices and procedures for use during design, development,fabrication, test and operation of space and missile systems .
0
09/04/9 0
•CARDNUMBER 1189 DOCUMENT MIL-S-8512 D
TITLE : Support Equipment, Aeronautical, Special General Spec . for Desig
AGENCY/AUTH :
REFERENCES 3 pages
ABSTRACT
CLASS SOURCE
---------------------------SCORE 1 .1 This specification covers general requirements for design
and construction of ground support equipment and provisions to beincorporated in detail specifications for specific items o fequipment .
09/04/9 0
0CARDNUMBER 1190 DOCUMENT MIL-M-3831 0
TITLE: Mass Properties Control Requir . for Missile and Space Vehicle s
AGENCY/AUTH :
REFERENCES MIL-P-116
ABSTRACT
CLASS SOURC E
--------------------------------------------------------------------
SCOPE 1 .1 This document establishes a system for the management ofmass properies during procurement and use of surface-to-surfaceballistic vehicles and space vehicles, or portions thereof . It isdesigned to permit the acquisition of systematized, verifiable andcontrollable mass properties of vehicle systems, to facilitaterapid establishment and reporting of inputs for theweight/performance relationship, and to enable parametricextrapolation from the reported systems to newly evolving systems .
09/04/9 0
0CARDNUMBER 119 1
TITLE : Parts Control Program
AGENCY/AUTH : DOD U.S .
REFERENCES
ABSTRACT
CLASS
DOCUMENT MIL-STD-965 A
SOURCE
-------- -------------------------------------------------------------SCOPE 1 .1 The purpose of this standard is to establish the
guidelines and requirements for implementation of a parts controlprogram .
09/04/9 0
.̂ARDNUMHER 1192 DOCUMENT MIL-STD-785 B
TITLE : Reliability Program for Systems and Equipment Develop . & Product
AGENCY/AUTH : DOD U .S .
REFERENCES MIL-STD-105, MIL-STD-721, MIL-STD-781, MIL-STD-965, MIL-STD-785B,MIL-HDBK-217
ABSTRACT
CLASS SOURCE
---------------------------------------------------------------------
SCOPE 1 .1 This standard provides general requirements and specifictasks for reliability programs during the development, production,and initial deployment of systems and equipment .
0
09/04/9 0
0CARDNUMBER 119 3
TITLE : Interface Control Document
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT P87-B
SOURCE
----------------- ..- ..---------------------------------------------- ..--
SCOPE 1 .1 This Interface Control document (ICD) dWfines th einterface between the Experiment designated as the TBD and theP87-B Space System during both the ground operations and theflight mission . Mechanical and Electrical interface details arespecified in the Mechanical Interface Control Drawing (MICD) andElectrical Interface Control Drawing (EICD) respectively .Supporting agreements and hardware and data schedules arecontained in Appendix 1 . It is intended that these dates andlanguage commitments be implemented as stated . To the extent that
~ Appendix 1 is in conflict with existing contracts, the contractsshall control and problems arising from these conflicts shall besettled by subsequent agreemei,ts between the sponsoring USAF' andcontracting agencies .
09/04/9 0
0CARDNUMBER 1194 DOCUMENT SS-GYS-101 B
TITLE : System Specification for the Navstar Global Positioning System
AGENCY/AUTH :
REFERENCES SS-SVS-101A, SS-US-101B, SS-CS-101B, MIL-STD-130D,
ABSTRACT
CLASS SOURCE
---------------------------------------------------------- ..----------SCOPE 1 .1 This specification establishes the performance, design,
development and test requirements for the Global PositioningSystem (GPS) Phase 1 .
09/04/9 0
•CARDNUMBER 1195 DOCUMENT YEN `78-31 2
TITLE: Design Requirements for the Phase III Space Segment of the NAVST
AGENCY/AUTH :
REFERENCES 5 pages
ABSTRACT
CLASS SOURCE
--------------- ..-J---------------- ----..--------------------------- ----SCOPE 1 .1 This specification establishes the performance design ,
development, test, production and orbital requirments for thespace segment of the Navstar Globla Positioning System (GPS) .
•
09/04/9 0
•CARDNUMBER 119 6
TITLE: SATSAT PA Program
AGENCY/AUTH :
REFERENCES 2 Pages
ABSTRACT
CLASS
DOCUMENT 80070 3
SOURCE SPAR
_-------------- ..---° .------------------------------------------..-------
SCOPE 1 .1 This document describes the product assurance program
implemented by Spar Aerospace Ltd . Satellite and Aerospace System s
ï:ivision (S&ASD), for the control of quality during theprocurement, manufacturing, test and preparation for delivery and
also during design modification phases of the SARSAT Follow-on
Production (FOP) project . It is designed to meet the intent of,
and be consistent with, accepted quality assurance specifications
such as NASA Publication NHB 5300 .4 (1B) Quality Program
Provisions for Aeronautical and space system Contractors .
09/04/9 0
eCARDNUMBER 1197
TITLE : SPAR PA Program
AGENCY/AUTH :
DOCUMENT 81025 0
REFERENCES MIL-STD-105D, MIL-STD-202F, MIL-HDBK-217E, MIL-STD-750C, MIL-STD-883C, 811161, 811162, ANSI-ASTM STD .E595-84, NHB-5300 .4,MIL-S-19500G, MIL-M-38510F, AFETRM 127- 1
ABSTRAC T
CLASS SOURCE SPAR
-----------------------------------------------------------------------SCOPE
09/04/9 0
0CARDNUMBER 17 .98 DOCUMENT 227265 4
TITLE : Electromagnetic Interference (EMI) Requirments Specification
AGENCY /AtTTH :
REFERENCES MIL-STD-461B, MIL-STD-462
ABSTRACT
CLASS SOURCE RCA
SCOPE 1 .0 This specification establishes the EMI requirements-applicable to the protoflight components of RCA Communicationspacecraft . These EMI requirements shall be used as the basis forthe EMI test program to be performed at the component level .
09/04/90
0CARDNUMBER 1199 DOCUMENT 230396 4
TITLE : Subcontractors Product Assurance Requir . for a Comm . Satellite
AGENCY/AUTH :
REFERENCES MSFC-HDBK-527D/JSC 09604, MSFC-SPEC-522, MSFC-SPEC-250, ASTM-E-595-83, MSFC-STD-506, JSC 18327, NHB 8060 .1, MSFC-STD-355, MIL-STD-202, MIL-STD-750, MIL-STD-883, MIL-STD-490, MIL-STD-975, MIL-M-38510, MIL-S-19500, MIL-STD-1520, MIL-HDBK-5, MIL-T-27, MIL-STD-129, MIL-C-3098, MIL-R-6106, MIL-F-23419, MIL-R-39016, MIL-HDBK-21 7
ABSTRACT
CLASS SOURCE RCA
SCOEE 1 .1 This-document-specifies the-subcontractor-Product---Assurance requirements for a communication satellite program .Emphasis is placed on subcontractor implemertation of existinghigh reliability, long life space hardware program control . TheSubcontractor shall provide the data and planning documents listedin Table 1 as part of the product assurance proposal response .
09/04/9 0
0CARDNUMBER 1200 DOCUMENT 230836 8
TITLE : Quality Assurance Program Plan for a Communication Satellite Pro
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE RCA
------..----------------------- ..---------------- ..--------------------SCOPE 1 .1 This Quality Assurance (QA) Program Plan describes
procedures and practices RCA will employ to assure compliance withcontract quality requirements for a Communication SatelliteProgram . RCA emphasizes defect prevention and controls qualitythroughout all phases of contract performance . Provision is madefor prompt corrective and preventive actions when deficiencies ornonconformances appear imminent or are discovered .
09/04/9 0
•CARDNUMBER 1 ;01 DOCUMENT 230836 9
TITLE: Reliability Program Plan for Communication Satellite Programs
AGENCY/AUTH :
REFERENCES MIL-HDBK-217, MIL-STD-721, MIL-Q--9858,
ABSTRACT
CLASS SOURCE RCA
------------------------ ..------------------------------------ -------SCOPE 1 .1 This Reliability Program Plan establishes the detailed
requirements and methods of implementation for a comprehensivereliability program. It is part of a total Product AssuranceProgram and provides reliability objectives and controls ofdesign, development, manufacture, and test of Contract End Item(CEI) equipments .
09/04/90
0CARDNUMBER 1202 DOCUMENT 230837 0
TITLE : Parts, Materials, and Processes Program Plan for Comm . Satellite
AGENCY/AUTH :
REFERENCES MSFC-SPEC-522A, MSFC-SPEC-250A, MSFC-HDBK-527D/, JSC 20810, MSFC-STD-506B, NHB 8060 .18
ABSTRACT
CLASS SOURCE RCA
------------------------------------------------------..--------------SCOPE
09/04/9 0
0CARDNUNiBER 1203
wDOCUMENT 230837 5
TITLE: software Quality Assurance Plan for a Comm . Satellite Program
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS SOURCE RCA
SCOPE 1 .0 This SoftwareyQuality-
Assurance~Program~(SQAP)~isapplicable to all computer software, as stated herein, which isdeveloped, modifed, or acquired for use on a communicationsatellite program . The SQAP is applicable throughout all phases ofthe project from preproposal planning to contract completion .
0
09/04/9 0
0CARDNUMBER 1204 DOCUMENT 230877 5
TITLE: Configuration Management Plan for Communication Satellite Progra
AGENCY/AUTH :
REFERENCES DOD-D-1000A, MIL-S-83490, MIL-STD-100, DOD-D-480A
ABSTRACT
CLASS SOURCE RCA
------------------------------------------------------------------SCOPE 1 .1 This configuration
-
management plan statesWhow the-
RCAProject Management Office (PMO) will use configuration managementdisciplines to accomplish the program objectives .
0
09/04/9 0
•CARDNUMBER 1205 DOCUMENT 262902 6
TITLE : System Safety Plan for Anik E Bus Subsystem
AGENCY/AUTH :
REFERENCES MIL-STD-454J, JSC 13830A
ABSTRACT
CLASS SOURCE RCA
--- ..----------------------------------------------------------------SCOPE 1 .1 This plan reflects the guidance and practices of RCA
product Assurance and System Safety management and OperatingInstructions as applied to the Anik E Program .
09/04/9 0
0CARDNUMBER 120 6
TITLE : Anik E Data Management Pla n
AGENCY/AUTH :
REFERENCES 2308775, 810211
ABSTRACT
CLASS
DOCUMENT 262902 7
SOURCE RCA
--------------------------------------- ..----------------------------SCOPE 1 .0 This plan identifies the policies and procedures to be
utilized for anik E data management . The documentation to besubmitted and the submission schedules for the various data itemsare as set forth in the Statement of Work, SPAR Aerospace Limiteddocument No . 810211, Appendix D, the issues in effect at the timeof Contract signing .
10/04/90
•CARDNUMBER 1207
TITLE :
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT MIL-C-8372 3
SOURCE
------------ ..------ .»------------------------------- ..- ..------------ ..-SCOPE
10/04/9 0
•CARDNUMBER 1208 DOCUMENT MIL-A-83577 B
TITLE: Assemblies, Moving Mechancial, for Space and Launch Vehicle s
AGENCY/AUTH :
REFERENCES 4 pages
ABSTRACT
CLASS SOURCE
--------------------------------------------------------------------SCOPE 1 .1 This specification sets forth he general requirements for
the design, manufacture, quality control, and testing of movingmechancial assemblies to be used on space and launch vehicles .
10/04/9 0
•CARDNUMBER 1209 DOCUMENT MIL-C-5541D
TITLE : Chemical Conversion Coatings on Aluminum and Aluminum Alloys
AGENCY/AUTH :
REFERENCES MIL-P-23377, MIL-C-81706, MIL-P-85582, FED-STD-141
ABSTRACT
CLASS SOURCE
-----..-------------------------------------------------- - ------------SCOPE 1 .1 This specification covers the requirements for two classe s
of chemical conversion coatings formed by the reaction of chemicalconversion materials and the sufaces of aluminum and aluminumalloys . This specification is intended specifically to providecomponents of military weapon systems with maximum corrosionresistance . The coating also provides a surface having betterpaint adhesion than uncoated aluminum . It is not intended as ageneral purpose coating for commercial and decorativeapplications, (see 6 .1) .
10/04/90
CARDNUMBER 1 21 0
TITLE : Electromagnetic ( radiated)
AG3ENCX / AUTH ~
DOCUMENT MIL-HDBK-235 1A
REFERENCES MIL-STD-461, MIL-STD-463, MIL-STD-1385, MIL-STD-1512, MIL-HDBK-235PART 2, MIL-HDBK-235 PART 3, MIL-HDBK-234 PART 4, MIL-HDBK-237, MIL-HDBK-253, AFSC DH1-4, AFSC DH2- 7
ABSTRACT
CLASS SOURCE
----------..---------------------------------------- ..-..--------------SCOPE 1 .1 The intent of this handbook is to provide guidance and
establish a uniform approach for the protection of militaryelectronics from the adverse effects of the electromagneticenvironment . The handbook is applicable to any electrical andelectronic equipment, subsystem or system which may be exposed toan electr,-,magnetic environment during its life cycle .
10/04/9 0
eCARDNUMBER 1211 DOCUMENT DOD-E-83578 A
TITLE: Explosive Ordnance for Space Vehicles (metric)
AGENCY/AUTH :
REFERENCES QQ-N-290, QQ-C-320, MIL-M-3171, MIL-C-5541, MIL-H-6088, MIL-H-6875, MIL-F-7179, MIL-S-7742, MIL-A-8625, MIL-S-8879, MIL-S-13572, MIL-C-26074, MIL-M-45202, MIL-H-81200, MIL-STD-29, MIL-STD-889, MIL-STD-1167, HIL-STD-1168, MIL-STD-1246, MIL-STD-1515, MIL-STD-1540, MIL-STD-1568, MIL-STD-1576, MS-3354 0
ABSTRACT
CLASS SOURCE
..-------- ..------..--------------------------..------------------- ..----SCOpE 1 .1 This specification sets forth the general requirements for
the design, manufacture, and testing of explosive ordnance . Therequirements stated in the specification are a composite of thosethat have been found to be cost effet-tive for high reliabilityspace vehicle applications .
10/04/90
0CARDNUMBER 1212 DOCUMENT MIL-STD-237 A
TITLE: Interim Notice EMC (Navy)
AGENCY/AUTH :
REFERENCES MIL-E-6051, MIL-STD-449, MIL-STD-461, MIL-STD-462, MIL-STD-469, MIL-STD-480, MIL-STD-1605, MIL-STD-2169, MIL-HDBK-,23 5
ABSTRACT
CLASS SOURCE
------- ------------------------------ .. ..-------------------------..- ..-SCOPE 1.1 This document is intended to provide managers resposible
for the design, development and acquisition of DOD platforms,system and equipments with the guidance necessary to establish aneffective program for achieving the desired degree of EMC . Thehandbook describes the steps which must be taken to ensure thatEMC considerations are incorporated during the life cycle toachieve the desired compatibility for the life cycle of theplatform, system, or equipment .
10/04/9 0
0CARDNUMBER 1214 DOCUMENT DOD-W-83575 A
TITLE : Wiring Harness, Space Vehicle, Design and Testing,
AGENCY/AUTH :
REFERENCES MIL-C-17, MIL-W-5088, MIL-W-5846, MIL-C-24308, MIL-C-38999, MIL-C-39012, MIL-C-55544, MIL-W-81044, MIL-W-81381, MIL-C-83723, MIL-C-83733, MIL-STD-863, MIL-HDBK-21 6
ABSTRACT
CLASS SOURCE
-..------------------------------------------------------------------SCOPE 1 .1 This specification sets forth the general design and
testing requirements for electrical wiring harnesses (see 6 .2 .5)and cable assemblies (see 6 .2 .4) that are to be installed in spacevehicles .
10/04/90
•CARDNUMBER 1215 DOCUMENT MIL-S-8357 6
TITLE : Solar Cell Arrays, Space Vehicle, Design and Testin g
AGENCY/AUTH :
REFERENCES MIL-T-152, MIL-F-7179, MIL-S-45743 ; MIL-C-83443, MIL-W-83575, MIL-STD-130, MIL-STD-143, MIL-STD-454, MIL-STD-889, MIL-STD-891, MIL-STD-1246, MIL-STD-1540, MIL-BU-40 0
ABSTRACT
CLASS SOURCE
---------------•--------------- .. ..-- ..- ..-------------------------------SCOPE 1 .0 This specification establishes the general design,
fabrication, performance, and testing requirements for solar cellpanels (6 .3 .4) and solar cell arrays ((6 .3 .5) to be installed onspace vehicles to convert solar energy into electrical energy aspart of the vehicle electrical system .
10/04/9 0
•CARDNUMBER 121 6
TITLE: Calibration Systems Requirment s
AGENCY/AUTH : DOD U.S .
REFERENCES
ABSTRACT
CLASS SOURCE
DOCUMENT MIL-STD-4566 2
---------------------------- -------- ..---------------------------------SCOPE 1 .1 This MIL-~~TD provides requirements for the establishmen t
and maintenar.ce of a calibration system to control the accuracy ofmeasuring and test equipment (M&TE) and measurement standards usedto assure that supplies and services delivered to the Governmentcomply with prescribed technical requirements .
10/04/9 0
CARDNUMSER 1.21 7
TITLE :
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT
SOURCE
----------------------------------------------------------------------
SCOPE
10/04/90
CARDNUMi3ER 1218 DOCUMENT MIL-STD-975 H
TITLE : NASA Standard Elect, Electronic,and Electromechanical Part List
AGENCY/AUTH : DOD U.S .
REFERENCES 6 pages
ABSTRACT
CLASS SOURCE
------------------------------------------- ..------------------------SCOPE 1 .1 This standard establishes a list of Electrical ,
Electronic, and Electromechanical (EEE) Parts for use in theselection, procurement and application for flight andmission-essential ground support equipment .
10/04/9 0
0CARDNUMBER 1220 DOCUMENT MIL-STD-1527A
TITLE: Standard General requirements for safe Design and Operation
AGENCY/AU~.'H :
Ÿ2EFERENCF ..~i MIL-E-6051, MIL-S-8512, MIL-STD-1540, MIL-STD-1472, MIL-HDf3K--5, MIL-HDBK-1 7
ABSTRACT
CLASS SOURCE
-------------------------------------- ..---------------------- .. ..-----
PRECEDIPlG PAG E BLAN K
SCOPE
10/04/9 0
CARDNUMBER 122 1
TITLE :
AGENCY/AUTH :
REFERENCES 7 pages
ABSTRACT
CLASS
DOCUMENT MIL-STD 154 7
SOURCE
------------------------------------------------------------------ ..-SCOPE 1.1 This standard establishes the minimum technical
requirements for electronic parts, materials, and processes usedin the design, development, and fabrication of space and launchvehicles . The term "electronic" is used in a broad sense in thisstandard and includes electrical, electromagnetic,electromechanical, and electro-optical parts associated withelectronic assemblies such as computers, communication equipment,electrical power, guidance, instrumentation, and space vehicles .The following categories of information are provided in thestandard for use by the circuit designer, part specialists,material specialists, process specialists, and reliabilityengineers .
10/04/90
0CARDNUMBER 122 2
TITLE :
AGENCY/AUTH :
REFERENCES
ABSTRACT
CLASS
DOCUMENT MIL-STD-156 8
SOURCE
----------------------- .. ..------------------- ..--------------..--------SCOPE 1 .1 This standard establishes the requirements for materials ,
processes and techniques, and identifies the tasks required toimplement an effective corrosion prevention and control programduring the conceptual, validation, development and productionphases of aerospace weapon systems . The intent is to minimize lifecycle cost due to corrosion and to obtain improved reliability .
10/04/9 0
•CARDNUMBER 1223 DOCUMENT MIL-HDBK-41 9
TITLE : Grounding, Bonding, and Shielding for Electronic Equip . and Fac i
AGENCY/AUTH : DOD U .S .
REFERENCES
ABSTRACT
CLASS SOURCE
------ ..-----.--------------------------------------------------------
SCOPE
10/04/90
•CARDNUMBER 1224 DOCUMENT MIL-STD-157 6
TITLE : Electroexplosive Subsystem safety Requirements & Test Methods
AGENCY/AUTH :
REFERENCES QQ-B-575, DOD-E-8983, DOD-E-83578, FED-STD-228, FED-STD-595, MIL-STD-202, MIL-STD-410, MIL-STD-453, MIL-STD-1167, MIL-STD-1168, MIL-STD-1512, MIL-STD-1546, MIL-STD--1547, DOD-5154 .4S, DODADL-TD-3, AFTO-11A-1-4 7
ABSTRACT
CLASS SOURCE
SCOPE 1 .1 The pupo.,e of this document is to insure the safety-o f- -personnel, launch site facilities, and space vehicles from thehazards resulting from electroexplosive subsystem unintentionalinitiation or failure to fire . The requirements and *est methodscontained in this document are not intended to insure al lelectroexplosive subsystem performance requirements except inthose cases where failure to perform would create a hazard to theitems listed above . The electroexplosive subsystem is composed ofall components from the power source to, and including, the EED(Electroexplosive device) ; Safe and Arm devices, Arm/Disarmswitches, relays and all electrical wiring used to monitor,control arm, and fire ordnance are specifically included . Thisstandard applies to all space vehicle systems (e .g ., launchvehicles, upper stages, boosters, payloads, and related systemsusing EED's)
10/04/90
•CARDNUMBER 1225 DOCUMENT MIL-STD-14 3
TITLE : Standard & Specifications, Order of Preference for the Selection
AGENCY/AUTH : DOD U .S .
REFERENCES MIL-STD-490, MIL-STD-961, MIL-STD-962
ABSTRACT
Cu 5S SOURCE
--------------------------------------------------------------------SCOPE 1 .1 This standard sets forth the order to preference for the
selection of standard and specifications used in the design,acquisition, construction and support of material for theDepartment of Defense in compliance with the Office of Managementand Budget (OMB) Circular A-119 on using commercial practices andnon-Government standards .
10/04/9 0
•CARDNUMBER 1226 DOCUMENT MIL-STD-109
TITLE : Quality Assurance Terms and Definitions
AGENCY/AUTH : DOD U.S .
REFERENCES
ABSTRACT
CLASS SOURCE
--------- ..-----------------------_-----------------------------------SCOPE This document provides a standardized interpretation of quality
assurance terms and definitions to be applied throughout theproduct quality .
10/04/9 0
0CARDNUMBER 1227 DOCUMENT MIL-C-8344 3
TITLE : Cells, Solar, Silicon
AGENCY/AUTH :
REFERENCES MIL-S-3464, MIL-S-19500, MIL-F-22191., MIL-S-45743, FED-STD-147
ABSTRACT
CLASS SOURCE
-------------------------------------------- ..-----------------------SCOPE 1 .1 This specification covers the general requirements for
silicon solar calls with transparent covers (see 6 .1) .
10/04/9 0
•CARDNUMBER 1228 DOCUMENT MIL-HDBK-25 3
TITLE : Guidance for the Design and Test System Protected Against th e
AGENCY / AiJTH :
REFERENCES MIL-B-5087, MIL-E-6051, MIL-STD-220, MIL-STD-285, MIL-STD-461, MIL-STD-462, MIL-STD-463, MIL-STD-1310, MIL-STD-1377, MIL-STD-1385, MIL-HDBK-235, MIL-HDBK-23 7
ABSTRACT
CLASS SOURCE
SCOPE 1 .1 The purpose of this document is to provide programmanagers with guidance for the design and test of electronicsystems which are to be immune to the detrimental effects ofelectromagnetic energy .
10/04/9 0
isCARDNUMBER 1229 DOCUMENT MIL-HDBK-24 1
TITLE: Design Guide for Electromagnetic Interference (EMI) Reduction in
AGENCY/AUTH :
REFERENCES MIL-T-27, MIL-E-16400, MIL-F-18870, MIL-T-28800, MIL-STD-461, MIL-STD-463, MIL-STD-785, MIL-STD-139 9
ABSTRACT
CLASS SOURCE
---- ---------------------- ..------- ..-----_.---------------------------
SCOPE 1 .1 This handbook offers guidance to power supply designers intechniques which have been found effective in reducing conductedand radiated interference generated by power supplies . It is acompilation of information from library sources, pertinentmilitary laboratory programs including contracts to universitiesand industry, and practical fixes derived from the experience ofengineers .
0
10/04/90
.CARDNUMBER 1230 DOCUMENT MIL-STD-463
TITLE : Definitions & Sytems of Units, Electromagnetic Interference
AGENCY/AUTH :
REFERENCES MIL-B-5087(ASG), MIL-STD--188-120, MIL-STD-285, MIL-HDBK-216
ABSTRACT
CLASS SOURCE
------------------------------------- ----------------------------------SCOPE 1.1 This standard is designed to assist in reaching a more
common understanding of the meaning of terms used in the variousmilitary standards which provide a basis for assuringelectromagnetic compatibility within the operational militaryenvironment . Definitions of terms and abbreviations are limited tostatements of meaning related to this and applicable standards,rather than encyclopedia or text book discussions .
10/04/9 0
sCARDNUMBER 1231 DOCUMENT MIL-STD-48 0
TITLE : Configuration Control-Engineering Changes, Deviations and Waiver
AGENCY / AUTH :
REFERENCES MIL-STD-109, MIL-STD-280, MIL-STD-483, MIL-STD-490, MIL-STD-882, MIL-STD-1388-1, MIL-STD-1388-2, MIL-STD-1520, MIL-STD-1521, MIL-STD-216 7
ABSTRACT
CLASS SCURCE
------------------------------------------------- ..----------------- -SCOPE 1 .1 This standard establishes the requirements, formats, and
procedures to be utilized in the preparation of configurationcontrol documentation .
10/04/9 0
0CARDNUMBER 123 2
TITLE: Radio Metric and Orbit Data
AGENCY/AUTH :
DOCUMENT CCSDS 501 .0-B- 1
REFERENCES (1) "Procedures Manual for the Consultative Committee for SpaceData Systems", Issue 1, Consultative Committee for Space DataSystem, August 1985 or later issue .
[2] "Introduction of the Improved IAU System of AstronomicalConstants, Time Scale, and Reference Frames into the AstronauticalAlmanac",Supplement to the Astronomical Almanac 1984, U .S .Government Printing Office, Washington, D .C ., 1983 .
[3] "Time Code Formats", Recommendation CCSDS 301 .0-B-1, Issue 1,Blue Book, Consultative Committee for Space Data Systems, January1987 or later issue .
The latest issues of CCSDS documents m&y be obtained from theCCSDS Secretariat at the address indicated on page i .
~,ABSTRACT
CLASS SOURCE CCSDS
-------------- . . ..-- .. ..-----..-..---------------------------------------- ..SCOPE 1 .1 The purpose of this document is to establish common
recommendations for adequately exchanging data involved in orbitcomputation (extrapolation, reconstitution, . . .) to providecross-support among missions and facilities of member Agencies ofthe Consultative Committee for Space Data Systems (CCSDS) . Inaddition, it provides focusing for the development ofmulti-mission support capabilities within the respective Agenciesto eliminate the need for arbitrary, unique capabilities for eachmission .
The topic areas to be covered include radio metric data,spacecraft orbital elements, solar systems epbemerides, trackingstation lo^ations, astrometric data, reference systems,astrodynamic constants, and spacecraft dynamic parameters . Theseparameters define the scope of the panel activities, and allshould deal explicitly with the technical definitions andconventions associated with inter-agency cross-support involvingthe transfer of orbital elements and ground-based conventionalradio metric data, i .e ., doppler and range .
10/04/90
eCARDNUMBER 1233 DOCUMENT CCSDS 301 .0-B- 1
TITLE : Time Code Formats
AGENCY/AUTH :
RFFERENCES [1] "Procedures Manual for the Consultative Committee for SpaceData Systems", Issue 1, Consultative Committee for Space DataSystems, August 1985 or later Issue .
[2] Bureau International de l'Heure Annual Report . Available fromMonsieur le Directeur, Bureau International de l'Heure, 61 Avenuede l'Observatoire, 75014 Paris, France, Also available from :Superintendent, U .S . Naval Observatory, Time Service Division,Washington, D .C . 20390 .
[3] Bureau International de l'Heure Circular D, Monthly Report .Available from Monsieur le Directeur, Bureau International del'Heure, 61 Avenue de l'Observatoire, 75014 Paris, France . Canalso be requested as Time Service Publication Series 15 from :Superintendent, U .S . Naval Observatory, Time Service Division,Washington, D .C . 2039 0
[4] Recommendations and Reports of the CCIR, XVth plenaryAssembly, Geneva 1982, Vol . VII : Standard Fre;uencies and Time, asmodified in 1983 and 1985, or later issue .
[5] "SI units and recommendations for the use of their multiples
and of certain other units :, International Standard ISO 1000,International Organization for Standardization, second edition,
1981 .
The latest issue of CCSDS documents may be obtained from the CCSDSSecretariat at the address indicated on page I .
ABSTRACT
CLASS SOURCE CCSDS
------------..-------------------------------------------------------
SCOPE 1 .2 Time codes are digital representations of timeinformation . Three standard CCSDS-Recommended time codes aredescribed (one"unsegmented" and two "segmented" codes) which usethe international standard second as the fundamental unit of time .
10/04/9 0
®CARDNUMBER 1234 DOCUMENT CCSDS 102 .0-B-2
TITLE : Packet Telemetry
AGENCY/AUTH :
REFERENCES [1] "Procedures Manual for the Consultative Committee for SpaceData Systems :, Issue 1, Consultative Committee for Space DataSystem, August 1985 or later issue .
L 2] "Telemetry Channel Coding", recommendation CCSDS 101 .0-B-2,Issue 2, Blue Book, Consultative Corunittee for Space Data Systems,January 1987 or later issue .
[3] "Telecommand, Part 2 : Data Routing Service, ArchitecturalSpecification", Recommendation CCSDS 202 .0-B-1, Issue 1, BlueBook, Consultative Committee for Space Data Systems, January1987 or later issue .
[4] "Telemetry : Concept and Rationale", CCSDS 100 .0-G-1, Issue 1Green Book, Consultative Committee for Space Data Systems 1987 orlater issue .
The latest issues of these documents may be obtained from theCCSDS Secret.ariat at the address indicated on page i .
ABSTRACT
CLASS SOURCE CCSDS
--------------------------------------------------------------------SCOPE 1 .2 Packet Telemetry is a concept which facilitates the
transmission of space-acquired data from source to user in astandardized and highly automated manner . Packet Telemetryprovides a mechanism for implementing common data structures andprotocols which may enhance the developments and operation ofspace mission systems .
10/04/9 0
•CARDNUMBER 1235 DOCUMENT CCSDS 101 .0-B-2
TITLE : Telemetry Channel Codin g
AGENCY/AUTH :
REFERENCES [1] "Procedures Manual for the Consultative Committee for SpaceData Systems", Issue 1, Consultative Committee for Space DataSystems, August 1985 or later issue .
[2] Tracking and Data Relay Satellite System (TDRSS) User'sGuide, GSFC STDN 101 .2, Rev . 5, ' NASA-Goddard Space Flight Centre,Greenbelt, Maryland, September 1984 .
[3] "Packet Telemetry", Recommendation CCSDS 102 .0-B-2, Issue 2,
Blue Book, Consultative Committee for Space Data Systems, January
1987 or later issue .
[4] Perlman M ., and Lee, J ., Reed-Solomon Encoders - Conventional
vs . Berlekamp's Architecture, JPL Publication 82-71, NASA-JetPropulsion Laboratory, T'asadena, California, December 1, 1982 .
[5] "Telemetry Concept and Rationale", CCSDS 100 .0-G-1, Issue 1,Green Book, Consultative Committee for Space Data Systems, January1987 or later issue .
The latest issues of the CCSDS documents may be obtained from theCCSDS Secretariat at the address indicated on page i .
ABSTRACT
CLASS SOURCE CCSDS
---..- .»-.. ..-..- .. .» .. ..----------------------------------------------------SCOPE 1 .2 Several space telemetry channel coding schemes are
described in this document . The characteristics of the codes arespecified only to the extent necessary to ensure interoperabilityand cross-support . The specification does not attempt to quantifythe relative coding gain or the merits of each approach discussed,nor the design requirements for encoders or decoders . Someperformance information is include in Referenc [5] .
CARDNUMBER 1236 DOCUMENT CCSDS 201 .0-B- 1
TITLE : Part 1 Channel Service Architectural Specification
AGENCY/AUTH :
REFERENCES [1] "Procedures Manual for the Consultative for Space Dat aSystems", Issue 1, Consultative Committee for Space Data Systems,August 1985 or later issue .
(2) "Telecommand, Summary of Concept and Service",CCSDS200 .0-G-6, Issue 6, Green Book, Consultative Committee forSpace Data Systems, January 1987 or later issue .
[3] "Telecommand, Part 3 : Data Management Service, ArchitecturalDefinition", recommendation CCSDS 203 .0-B-1, Issue 1 Blue Book,Consultative Committee for Space Data Systems, January 1987 orlater issue .
(4) "Telecommand, Part 2 : Data Routing Service, ArchitecturalSpecification", Recommendation CCSDS 202 .0-B-1, Issue 1, BlueBook, consultative Committe for Space Data Systems, January 1987or later issue .
[5] "RF and Modulation", Recommendation CCSDS 401, Blue Book,Consultative Committee for Space Data Systems, January 1987 orlater issue .
ABSTRACT
CLASS SOURCE CCSDS
--------------------------------------------- -----------------------SCOPE 1 .1 The purpose of this document is to establish a common
recommendation ehich defines the systems architecture of aspacecraft telecommand"Channel Service" . the intent of thisarchitecture is to provice a common framework within whichAgencies participating in the Consultative Committee for SpaceData Systems (CCSDS) may implement compatible future spacecrafttelecommanding systems .
This recommendation primarily addresses the data unit formats andfunctions which are implemented within the Coding layer and thePhysical layer of the CCSDS telecommand Channel Service . The
(6) "CCSDS System Description, Volume 1 : Recommended Interfacesand Access Points," Issue 0, Green Book, Consultative Committeefor Space Data Systems, January 1986 or later issue .
The latest issues of these documents may be obtained from theCCSDS Secretariat at the address indicated on page i .
associated detailed operational protocols which operate acrossthese layers, and the flow of control information required toinitialize the layers and direct the transfer of data between-em, are not presently addressed within this document : Theseremain items for potential extension of this recommendation .
The operating principles and procedure for the CCSDS are definedin Reference [1] . The context of the Channel Service within theoverall Telecommand System is described in Reference [2] . This isa working document, subject to update as experience is gained,which provides an inter-Agency coordination mechanism thatensures that compatible implementations are facilitated .
18/04/90Provided - Class
0CARDNUMBER 1237 DOCUMENT SPAR-R .110 7
TITLE: Vulnerability of Communications Spacecraft to ASAT Laser Weapons
AGENCY/AUTH : SPAR
REFERENCES
ABSTrtACT On Microfiche, see title Completed in 198 1
CLASS Design SOURCE Commercial SPAR
------------------------------•------ ..------------ ..-------------- ----SCOPE See title
18/oa/90Provided - Class
0CARDNUMBER 1238 DOCUMENT AGARD # 40 6
TITLE : The Aerospace Environment at High Altitude and its Impl for S/C
AGENCY/AUTH : AGARD
REFERENCES
ABSTRACT See unclassified Volume 71 Progress in Astronautics and Aeronauti cs
CLASS Design SOURCE Institution AGAR
------------------------------------ ----------------------------------SCOPE
19/04/90Provided - Clas s
CARDNUMBER 1239 DOCUMENT 6 .17 CRC List
TITLE : NATO IV Space Segment Technical Specifications First Draft
AGENCY/AUTH : NATO NICSMA
REFERENCES 6 .7 CRC List
ABSTRACT First cut design spec for NATO SATCOM Phase I V
CLASS Design SOURCE Military NATO
----------------------------------------------------- ..---------------SCOPE This working paper contains only part of the technical
specification of the NATO SATCOM Phase IV satellite, namely, somegeneral background information and the first draft of thecommunications subsystem specifications prepared by CmC forNICSMA . The invitation for bids (IFB) which is planned to beissued in mid 198 0 will also include technical specifications forseveral other subsystems ; it is assumed that these "bus"specifications (which only inderctly support the NICS userrequirements defining the satellite payload) will be incorporatedin due course by the managerial aerospace authority (SPO) .
19/04/90Provided - Class
0CARDNUMBER 1240 DOCUMENT 6 .7 CRC List
TITLE: NATO IV Space Segment Performance Specifications :Comms Subsystem
AGENCY/ALTTH :, NATO NICSMA
REFERENCES NIC'S Stage II Architecture Report (NICSMA D/81 )
ABSTRACT This report has been prepared by the SHAPE Technical Centre forthe NATO Integrated Communications System Management Agency
(NICSMA) under the terms of the NICS Special Project SAT/15 .
CLASS Design SOURCE Military NATO
------------------------- -------------- ..-SCOPE This report contains only part of the technical specification of
the NATO SATCOM Phase IV satellite, namely, background informationand the specifications of the communications subsystem,includingthe ground based equipment required for operationa lpayload control and to enhance NATO SGTs to use th eNATO IV satellite effectively . The invitation for bids (IFB)will also include technical specifications for several othersubsystems supporting the payload ; these "bus" specifications willbe incorporated by NICSMA . The same applies to other requirementsto be included in the IFB such as environmental specifications,flight support operations, testing, training, etc .
19/04/90Provided - Clas s
sCARDNUMBER 1241 DOCUMENT 6 .8 CRC List
TITLE : Joint MILSATCOM Threat Summary
AGENCY/AUTH : U .S. Defense Intelligence Agency
REFERENCES
ABSTRACT
CLASS Design SOURCE Military
-------------•----------------------------------------------------_---SCOPE
19/04/90Provided - Class
CARDNUMBER 1242 DOCUMENT 6 .9 CRC List
TITLE: Confidential. Title
AGENCY/AUTH : U .S . Defense Intelligence Agency
REFERENCES
ABSTRACT
CLASS Design SOURCE Military
----------------------------------- .-----------------------------------SCOPE
19/04/90Provided - Class
sCARDNUMBER 1243 DOCUMENT STC TM-68 4
TITLE: An Assestnent of the Airborne and Spaceborne ECM Threat,SATCOM
AGENCY'/AUTH: NATO
REFERENCES
ABSTRACT February 1987
CLASS Design SOURCE Military NATO
--------------------------------------------------------------------SCOPE
19/04/90Provided - Class
•CARDNUMBER 1244
DOCUMENT DREO Rep # 84 2
TITLE: Nuclear Vulnerability and Survivability of a Satellit e
AGENCY/AUTH : DREO P . Bhartia
REFERENCES
ABSTRACT April 1981,
CLASS Design SOURCE Military NATO
---------------------------------- .--SCOPE --
19/04/90Provided - Class
CARDNUMBER 1245 DOCUMENT DREV Rep 4322/8 4
TITLE: The Potential Threat: of ASAT Laser Weapons to Geostationary S/C
AGENCY/AUTH : DREV J .P . Morency
REFERENCES
ABSTRACT July 1984, before the year 200 0
CLASS Design SOURCE Military NATO
SCOPE -----•-------
UnclassifiedtECURITV CLAi>ri/ICATION O F iO11M
(hi0hat ehtsification of Tïtle, AYstraot, Keywords)
olect office o
r CONTROL DATADOCUMENTtfrawity Ct~ssilitetitrrt of tHlo, body of abatraet aed ledexine anrwtetlon must be sntsrrrd wharf the ovdrsll document Is classifisdl
ORIGINATOR (the nome .~f►d address of the orpanization preparing the document. 2. SECURITY CLASSIFICATIO NOrganizations for whom the dotument wu prepared . e.g. Establishment sponsoring (overall security classification of the document.a contractor's report, or tasking apency, are entered in section 8 .) including spec ial warning terms if applicable)
Routes Incorporated202-329 I%iarch Rd . Kanata, Ont,. K2K J?ïl Unclassified
3. TITLE (the complete documen+ title as i ndicated on the t i tle pape . Its classification should be i ndi cated by the appropriatea bbrevi ►tion (S,C,R or U) in o .rentheses after th,y tiUe. )
Space ~ualification Specification for ~~iilitary Satellites(U )
4. AUTHORS "st nane, first name , midole initial) Payne William F.
Buckingham ttonaldDaniels Frederick R .Townsend Peter L .
5 . DATE OF PUBLICATION ( month and year of publication of 6a. NO. OF PAGES ( total 6b, NO. OF REFS (total c i ted i ndocument) Containinp mformatton. Include document)
April 1990 Annexes,90
ndices, etc. )2
23
S
7 . OESCRIPTIVE NOTES (the category of the document, e.g. techn icai report, technical note or memorandum. If appropriate, enter the type o freport, e .g. interim, progress, summary, annual or final. Give ne inclusive dates when e Specific reporting penod is covered. )
Technical Note - Final ttepor~t
sponsoring the reselerch and development. Include th elaborator ySPONSORING ACTIVITY ( the ttame of the departmentaddress.)
CrZC O~AT
9a. PROJECT OR GRANT NO. (if appropriate, the applicai' le rese,arch 9b . CONTRACT NO. (if appropriate, the applicable number under
and development project or grant number under which it . document wh i ch the document was wr itten )was written. Pleise specify whether prolect or grant)
N/A 36001-9-359 4/01 5 V10a ORIGINATOR'S DOCUMENT NUMI3 ER (the officid document 10b. OTHER DOCUMENT NOS. (Any other numbers which may
number by which the document is identified by the originating be assigned this document either by the originator or by th e
activity. This nutnber must be unique to this document) sponsor)
K 34-90
11 . DOCUMENT AVAILABtLITY (any limrtauc - . on further dtsseminatton of the document, other than those i~,nposed by security classification)
( x1 Unlimited distributionDistribution limited to defence uepartmem!, and defence contractors : further distribution only as approve d
Distribution limited to defence departments and Canadian defence contreetors ; further distribution oniy as approve d
Distribution limited to government departments and agencies ; further distribution only as epprove d
Distribution limited to defence departments; further distribution only as approved( 1 Other (please specify) :
12 . DOCUMENT ANNOUNCEMENT 4M limitation to the biblioq►~Vmc announcement of this document . This will normally correspond t o
the Document Avnltlilty (11). However, where further distribution (beyond the audience specified in 11) is possibte, a wide r
annou,lcement audience may be seleated. )
~._. ., .
Unclassifie d
SECURITV CLASSIFICATION OF FOAM
DC003 i 1!Cô/81
Iinn Q!a{,f`jadpCUMtTr tu►sMtcATtON or ro11M
13. ABSt HACT I o(eief and factual summary of the aoarnentt It may On eppeer elsewhere in the ►ody of the document itself . It is hiphlydesir+ble that the abstract of classif ied documents be uncessified, Each persOreph of the abstract siudl begin with an indication of the ~security clessificetron of the information in the perpreph lunleis the document itself is uncWsified) represented as (S), IC), (R), or lUl.It is not necessay to i nclude two sbstrects in both office! loiqupes unless the text is bdâqueq.
1.1 )tiftsposp eot pttaft
50~~ The Gbjetotivr was to compile and oxqanisea reference materialso that it can. sabtsrqueatlt be used to qtrsarats a ooheresst set ofonviromisntal speioLtioationt for Caaadian Perces spaos-baseadhardware prooorsuats . ,
1.2 toopet o!.' atmy
~ Zhrehe sources of ra
have been oataloqne,d. Dorinq the study Pontas also identified
• Standard military documents= both classified andnnolassilieaci .
• Documents lrroae institutions and qoveirmwnt aqesnoiss .• Cosseroiallf produced documents .
1n eZistinM collection of papWs and stpaaifiaations wasprovided by CAC/M2o to Routes, for review and inclusion in thisrrport' thoso 1o2ausents daalia4 with suvitoanetntal qualification
other relevant doonsianta which are listed in the 7lppeuidiz. Thisappetndiz is described in section S
. //
14. KEYWORDS, DESCRIPTORS or IDENTIFIERS jtechniully meaningful terms or short phrases that clwecteti :e a document and could behelpful in cataloguing the document They should bit selected so that no security classification is re0uired. Identifiers, such as equipmentmodel designation, trade name, military project code nerne, geographic location may also be i ncluded. If possible keywords should be selectedfrom a published theseurus- e .g . Theseurus of Engineering and Scientific Terms REST) and that theseuruswidentnfied. If it is not poss i ble toselect indexing tnrms which are Unclassified, the classification of each should be indicated as with the title. )
Specifications, Standards, Handbooks
Online Search
Spacecraft Design
Spacecraft Qulification
Spacecraft Testing
Document Sources
Database i,:ethod s
Unclassified
rrr . .w .~~ w, ♦ ww .w .w .w .w~~ we eAb .•
~