12. Crease the midpoint.

Author’s comments: Use a bi-colored squareto create this spooky group of 2 owl chicks. Ilike to wet fold this model from white or blackCanson backed with bright green or yellow foilfor the face color. Perfect decoration forHalloween!

Created / 2006Difficulty / IntermediateTime to Create / 20 min.Dimension / R=0.5

19. Reverse the direction of the indicatedfolds.

20. Crease the angle bisector. Do notcrease the bottom layer.

1. Crease the diagonal andthe midpoint of the bottomedge.

black dot

hollow dot

black dot

hollow dotblack dot

hollow dot

black dot

hollow dot

black dot

hollow dot

black dot

hollow dotOwlets

1 2 3 4

1. Crease the face coloredside of paper or foil.

2. Crease an angle bisectorat the horizontal diagonal andslightly below it.

3. Bisect angle once more,creasing only at point P onthe diagonal.

4. Valley-fold the rightcorner to point P.

5. Fold the top corner down. Foldand unfold the bottom corner up.

6. Valley-fold and unfoldalong the midline.

P

P

27. Change the direction of twofolds on the back of the headand then symmetrically crimpthe edge inside the model.

28. Repeat the last stepon the other chick’s head.

29. Put both flaps togetherand roll their edges behind.

30. Refoldstep 16.

32. Fold the large flap and sinkedbottom down. The sides of themodel will bend inward.

31. Close-sink the botttomand turn the model over.

Completed owlets.

Don’t worry if your owletsappear slightly different thanthese.

Just make them spooooooky!22. Spread apartedges to create eyes.. 23. Shape the left eye and

dent the top of the head.21. Shape the lower edges ina similar manner.

View of thereverse side.

10. Fold the left cornerto the right corner.

Fold the bottom cornerup .

11. Mountain-fold the tophalf of the model behind ona line through point R.

12. Adjust the fold by placingthe corners on the midline ofthe model’s reverse side (dot).

Unfold the last step.

17. Crimp the sides of the two owl headsand then undo the crimps.

16. Push in the valley fold of step 14, and put the line segments QR andRS together. Let the corners on the right swivel behind as in step 11.

7. Put the bottom corner onthe midline at the top. Pinchon the crease of step 2 atpoint R.

8. Define a line from the rightside of the white trianglethrough point R. Valley-creasethe line below point R.

9. Pleat the right side onexisting folds.

13. Mountain-fold the creaseof step 8 through all layers.

14. Change the mountain foldbelow point R to a valley fold.

15. Create a mountain fold(line QR) through all layers .The valley fold of the laststep bisects the angle QRS.

beak

secondowlet

eyes firstowlet

18. Open sink corners of theowl’s head on the right.

19. Close sink edges to roundthe top of the head.

20. Shape the bill withcurved mountain creases.

24. Repeat steps 18-23 onthe other owl’s head. 25. Unfold step 16.

26. Open the top layer and view it from the folded edge.

12. Crease the midpoint.

Author’s comments: Use a bi-colored squareto create this spooky group of 2 owl chicks. Ilike to wet fold this model from white or blackCanson backed with bright green or yellow foilfor the face color. Perfect decoration forHalloween!

Created / 2006Difficulty / IntermediateTime to Create / 20 min.Dimension / R=0.5

19. Reverse the direction of the indicatedfolds.

20. Crease the angle bisector. Do notcrease the bottom layer.

1. Crease the diagonal andthe midpoint of the bottomedge.

black dot

hollow dot

black dot

hollow dotblack dot

hollow dot

black dot

hollow dot

black dot

hollow dot

black dot

hollow dotOwlets

1 2 3 4

1. Crease the face coloredside of paper or foil.

2. Crease an angle bisectorat the horizontal diagonal andslightly below it.

3. Bisect angle once more,creasing only at point P onthe diagonal.

4. Valley-fold the rightcorner to point P.

5. Fold the top corner down. Foldand unfold the bottom corner up.

6. Valley-fold and unfoldalong the midline.

27. Change the direction of twofolds on the back of the headand then symmetrically crimpthe edge inside the model.

28. Repeat the last stepon the other chick’s head.

29. Put both flaps togetherand roll their edges behind.

30. Refoldstep 16.

32. Fold the large flap and sinkedbottom down. The sides of themodel will bend inward.

31. Close-sink the botttomand turn the model over.

Completed owlets.

Don’t worry if your owletsappear slightly different thanthese.

Just make them spooooooky!22. Spread apartedges to create eyes.. 23. Shape the left eye and

dent the top of the head.21. Shape the lower edges ina similar manner.

View of thereverse side.

10. Fold the left cornerto the right corner.

Fold the bottom cornerup .

11. Mountain-fold the tophalf of the model behind ona line through point R.

R

12. Adjust the fold by placingthe corners on the midline ofthe model’s reverse side (dot).

Unfold the last step.

17. Crimp the sides of the two owl headsand then undo the crimps.

16. Push in the valley fold of step 14, and put the line segments QR andRS together. Let the corners on the right swivel behind as in step 11.

7. Put the bottom corner onthe midline at the top. Pinchon the crease of step 2 atpoint R.

8. Define a line from the rightside of the white trianglethrough point R. Valley-creasethe line below point R.

9. Pleat the right side onexisting folds.

R R R

13. Mountain-fold the creaseof step 8 through all layers.

14. Change the mountain foldbelow point R to a valley fold.

15. Create a mountain fold(line QR) through all layers .The valley fold of the laststep bisects the angle QRS.

R

RQ

S

R

18. Open sink corners of theowl’s head on the right.

19. Close sink edges to roundthe top of the head.

20. Shape the bill withcurved mountain creases.

24. Repeat steps 18-23 onthe other owl’s head. 25. Unfold step 16.

26. Open the top layer and view it from the folded edge.

R

R

12. Crease the midpoint.

Author’s comments: Use a bi-colored squareto create this spooky group of 2 owl chicks. Ilike to wet fold this model from white or blackCanson backed with bright green or yellow foilfor the face color. Perfect decoration forHalloween!

Created / 2006Difficulty / IntermediateTime to Create / 20 min.Dimension / R=0.5

19. Reverse the direction of the indicatedfolds.

20. Crease the angle bisector. Do notcrease the bottom layer.

1. Crease the diagonal andthe midpoint of the bottomedge.

black dot

hollow dot

black dot

hollow dotblack dot

hollow dot

black dot

hollow dot

black dot

hollow dot

black dot

hollow dotOwlets

1 2 3 4

1. Crease the face coloredside of paper or foil.

2. Crease an angle bisectorat the horizontal diagonal andslightly below it.

3. Bisect angle once more,creasing only at point P onthe diagonal.

4. Valley-fold the rightcorner to point P.

5. Fold the top corner down. Foldand unfold the bottom corner up.

6. Valley-fold and unfoldalong the midline.

27. Change the direction of twofolds on the back of the headand then symmetrically crimpthe edge inside the model.

28. Repeat the last stepon the other chick’s head.

29. Put both flaps togetherand roll their edges behind.

30. Refoldstep 16.

32. Fold the large flap and sinkedbottom down. The sides of themodel will bend inward.

31. Close-sink the botttomand turn the model over.

Completed owlets.

Don’t worry if your owletsappear slightly different thanthese.

Just make them spooooooky!22. Spread apartedges to create eyes.. 23. Shape the left eye and

dent the top of the head.21. Shape the lower edges ina similar manner.

View of thereverse side.

10. Fold the left cornerto the right corner.

Fold the bottom cornerup .

11. Mountain-fold the tophalf of the model behind ona line through point R.

12. Adjust the fold by placingthe corners on the midline ofthe model’s reverse side (dot).

Unfold the last step.

17. Crimp the sides of the two owl headsand then undo the crimps.

16. Push in the valley fold of step 14, and put the line segments QR andRS together. Let the corners on the right swivel behind as in step 11.

7. Put the bottom corner onthe midline at the top. Pinchon the crease of step 2 atpoint R.

8. Define a line from the rightside of the white trianglethrough point R. Valley-creasethe line below point R.

9. Pleat the right side onexisting folds.

13. Mountain-fold the creaseof step 8 through all layers.

14. Change the mountain foldbelow point R to a valley fold.

15. Create a mountain fold(line QR) through all layers .The valley fold of the laststep bisects the angle QRS.

18. Open sink corners of theowl’s head on the right.

19. Close sink edges to roundthe top of the head.

20. Shape the bill withcurved mountain creases.

24. Repeat steps 18-23 onthe other owl’s head. 25. Unfold step 16.

26. Open the top layer and view it from the folded edge.

RQ

S

RQ

S

RQS

RQ

S

S

12. Crease the midpoint.

Author’s comments: Use a bi-colored squareto create this spooky group of 2 owl chicks. Ilike to wet fold this model from white or blackCanson backed with bright green or yellow foilfor the face color. Perfect decoration forHalloween!

Created / 2006Difficulty / IntermediateTime to Create / 20 min.Dimension / R=0.5

19. Reverse the direction of the indicatedfolds.

20. Crease the angle bisector. Do notcrease the bottom layer.

1. Crease the diagonal andthe midpoint of the bottomedge.

black dot

hollow dot

black dot

hollow dotblack dot

hollow dot

black dot

hollow dot

black dot

hollow dot

black dot

hollow dotOwlets

1 2 3 4

1. Crease the face coloredside of paper or foil.

2. Crease an angle bisectorat the horizontal diagonal andslightly below it.

3. Bisect angle once more,creasing only at point P onthe diagonal.

4. Valley-fold the rightcorner to point P.

5. Fold the top corner down. Foldand unfold the bottom corner up.

6. Valley-fold and unfoldalong the midline.

27. Change the direction of twofolds on the back of the headand then symmetrically crimpthe edge inside the model.

28. Repeat the last stepon the other chick’s head.

29. Put both flaps togetherand roll their edges behind.

30. Refoldstep 16.

32. Fold the large flap and sinkedbottom down. The sides of themodel will bend inward.

31. Close-sink the botttomand turn the model over.

Completed owlets.

Don’t worry if your owletsappear slightly different thanthese.

Just make them spooooooky!22. Spread apartedges to create eyes.. 23. Shape the left eye and

dent the top of the head.21. Shape the lower edges ina similar manner.

View of thereverse side.

10. Fold the left cornerto the right corner.

Fold the bottom cornerup .

11. Mountain-fold the tophalf of the model behind ona line through point R.

12. Adjust the fold by placingthe corners on the midline ofthe model’s reverse side (dot).

Unfold the last step.

17. Crimp the sides of the two owl headsand then undo the crimps.

16. Push in the valley fold of step 14, and put the line segments QR andRS together. Let the corners on the right swivel behind as in step 11.

7. Put the bottom corner onthe midline at the top. Pinchon the crease of step 2 atpoint R.

8. Define a line from the rightside of the white trianglethrough point R. Valley-creasethe line below point R.

9. Pleat the right side onexisting folds.

13. Mountain-fold the creaseof step 8 through all layers.

14. Change the mountain foldbelow point R to a valley fold.

15. Create a mountain fold(line QR) through all layers .The valley fold of the laststep bisects the angle QRS.

18. Open sink corners of theowl’s head on the right.

19. Close sink edges to roundthe top of the head.

20. Shape the bill withcurved mountain creases.

back of the head

24. Repeat steps 18-23 onthe other owl’s head. 25. Unfold step 16.

18-23

26. Open the top layer and view it from the folded edge.