OWC 40 & 50 SERIESOIL/WATER

CONTROLLER

• OWC 40 Process In-Tank Oil/Water Controller

40 SERIES

• OWC 50 Process In-Line Oil/Water Controller

• OWC 51 Process In-Line Oil/Water Controller

50 SERIES

Compact,

portable, easy

to transport

and install

No pressure

or flow effect

on

measurements

In most cases OWC presented in the market are bulky and require high maintenance to be effective.

OWC SERIES

Principle

of operation The OWC series is based on the principle of the dipole water

molecule, as water has a considerable amount of absorption.

This would be demonstrated by a ultrahigh frequency band width,

with up to 3.5 GHz. This would determine the presence of the

moisture within a given petroleum product that uses a water-oil

emulsions. That are complex permeability within a high-frequency

and a ultrahigh frequency with band that consists from 0.5 to 3.5 GHz

measuring method. As the measuring principle of the OWC series is

based upon the measurements of a electromagnetic energy losses in

a given water-oil emulsion. Based on this principle the OWC series is

unique and most efficient in its class compared to other OWC meters.

Rigorous factory testing and calibration secure high accuracy that is

not affected by flow rates.

Unique resonant tube technology

The sensor comprises a vibrating tube sensor, drive electronics and signal processing electronic.

Cylinder shape has symmetric geometry

Repeatable mechanical manufacturing

Repeatable metal structure Low own mass of the sensor Washed on either side by

measured liquid eliminates pressure effect

Allows both Density and Viscosity measurement

Ni-Span-C material offering low temperature expansion factor

Resonant tube advantages

OWC 50 SERIES inside profile

Cylinder

Outlet and inlet

Resonant tube

Electronic housing

Calibration

Calibration of LEMIS process is

performed in-house according

ISO9001:2000 quality

assurance program by using

calibration materials that are

traceable to national standards.

In-house calibration and

testing is performed specified

dedicated calibration protocol

for every standard model of the

sensor. For most applications,

on-site calibration is generally

not required. LEMIS process

sensors allows simple, switch-

and-go field installation.

Petroleum industry

Antifoam and demulsifier chemical feed systems

Waste water treatment

Desalter control

Automatic tank dewatering

Applications

Advantages

Real-time measurements, high accuracy

Easy to clear

Compact, portable design

Simple installation

No additional maintenance required

No nuclear (radioactive) sources

Rigorous factory testing and calibration

Easy to transport

Competitive price

Operating ranges

Water emulsion concentration:

0 to 100%

Process Temperature:

0°C to +100°C (+32°F to +212°F) – Standard

0°C to +232°C (+32°F to +450°F) - High temperature

The OWC Series is in a class of its own. This is due to the unique design and the stability of the equipment, also the impressive range of Emulsion 0 to 100% and its Emulsion Concentration OWC 4005: +0.5%, as well as OWC 4010: +1%. With a temperature Accuracy of + 0.1c (+ 0.2f ) this makes the OWC Series a leader in its class in oil water controller equipment.

Accuracy