overview n.y.e. is part of an international network of companies, laboratories and enthusiasts in...
TRANSCRIPT
This can be THREE folds:1. Less Consumption: hundreds of tests have revealed the following
results:• 10-15% for local green diesel• 15-25% for local red diesel• >25% for other dirtier diesel found in the local market• Up to 40% for gasoline• Up to 20% for HFO (not enough data)
2. Less Maintenance: in the following areas (but not limited to):• Filters last longer• Fuel lines last longer• No need for cleaning injectors • Optimum efficiency in combustion
3. Usage of lower quality fuel can give the same performance as using high quality one
Economical Benefits
Usage
• For diesel and HFO, the mixing ratio of the additive is 0.2% or 2 per thousand.
• For gasoline, the mixing ratio is 0.3% or 3 per thousand
Mixing takes place within 10 minutes automatically without any mechanism or tool
For best results, the additive should be mixed in the proper ratios with a margin of error of ± 5%. Continuous usage on
regular basis ensures all the benefits at all times
How Does it Work?
5201 modifies the combustion process to make it more efficient. It makes the fuel particles more homogeneous so that the fuel-air ratio will be optimized leading to a more efficient combustion. The figure below shows the process of ignition and fuel explosion in the cylinder. The figure to the left is taken without the additive while the one to the right is with the additive. Notice the faster propagation of the explosion.
Composition
5201
Hydrocarbons
IPA
Special Mineral Oils
Ketones
5201 Additive Formula
All these ingredients are completely compatible with the fuel systems and fuel found in the market
Physical Data / Storage
Melting Point -85 °C
Boiling point >120 °C
Flash point 65 °C
Specific Gravity 0.84 – 0.88
Solubility 100% soluble
Stability Highly stable
5201 D and 5201 F come in 20 liters special plastic containers. Store in proper shady space at ambient temperature (less than 40°C)
There is no shelf-life for these products
Tests (photos below are the property of some clients)
Before After
Combustion chambers, Pistons, Valves, etc… are always clean if
5201 is used
The injectors maybe dirty with gum deposits. Using 5201 will
make them clean again
With 5201, you may notice heavy smoke in the beginning of usage
due to the cleaning process that is taking place. Afterwards, smoke
decreases dramatically
Contacts
OFFICE: 3rd Floor – Kaline Center – Sin El Fil – Lebanon
PLANT: Nahr El Mot
PHONE: +961 1 482435/6+961 3 227426 (Elias Aoun – General Manager)+961 3 883454 (Salah Maalouf – Sales Representative)
MAIL: 50440 – Furn El Chebbak – Baabda 10112040 – Lebanon
EMAIL: [email protected]