outdoor 150 w 2 channel sl-l2701a5n1kr product data sheet rev. 1.0 2017.09.07 led driver outdoor 150...
TRANSCRIPT
1#
Product Data Sheet Rev. 1.0 2017.09.07
LED Driver
Outdoor 150 W 2 Channel SL-L2701A5N1KR
High Efficiency Constant Current LED Driver With Active Power Factor Correction Features & Benefits
Output Current: 700 mA Fixed
Output Voltage Range: 80 ~ 100 Vdc(Typ. 90 Vdc)
Output Power: Max 150 W
Dimming Control: Non-Dimming
Input Voltage: 120~277 Vac, 50/60 Hz
Safety: KS C 7655, K 61347-1, K 61347-2-13, K 62384
EMI: KS C CISPR 15, KS C IEC 61547, KN 15, KN 61547
Protections: Short Circuit, Over Voltage, No Load
ta Range: -40 ~ +50 °C
Expected Lifetime: 50,000 hours at tc ≤ 74 °C
Environmental Compliance: RoHS
Long lasting & High reliability
2 Channel Output
Flickerless
Applications
LED Street/Tunnel Lighting and Outdoor LED Lighting
2
Table of Contents
1. Characteristics ----------------------- 3
2. Safety standards ----------------------- 4
3. Typical Characteristics Graphs ----------------------- 5
4. Reliability ----------------------- 6
5. Outline Drawing & Dimension ----------------------- 7
6. Label Structure ----------------------- 8
7. Packing Structure ----------------------- 8
8. Precautions in Handling & Use ----------------------- 8
3
1. Characteristics
Article Symbol
Specification
Unit Note
Min. Typ. Max.
INPUT SPECIFICATIONS
Nominal Input Voltage Vin 120 220 277 Vac
Input Voltage Range 108 300 Vac
Nominal Frequency fin 50 / 60 Hz
Frequency Range 47 63 Hz
Input Current Iin 0.65 1.5 A
Input Power Pin 140 170 W
Total Harmonic Distortion THD 7 10 % At 220Vac
Power Factor PF 0.95 - At 220Vac
Efficiency η 89 92 % At 220Vac
In-rush Current 100 A 25℃ Cold start, Duration≤1ms
OUTPUT SPECIFICATIONS
Output Channel CH 2 2-channel output
Nominal Output Voltage Vo 80 90 100 Vdc
Max. Voltage 153 Vdc Open circuit, No-load protection
Output Current Io 700 mA ±5%Io, Fixed current output
Output Ripple Current Iripple 70 mA Measured by 20 MHz bandwidth oscilloscope & output in parallel with 0.1 μF ceramic cap. and 10 μF e-cap.
Peak Current Ipk 1400 mA
Output Power Po 126 150 W
Turn-on Delay Time Td 0.1 0.5 s
DIMMING SPECIFICATIONS
Dimming Control N/A Vdc
Dimming Range N/A %Io
4
Article Symbol
Specification
Unit Note
Min. Typ. Max.
ENVIRONMENTAL SPECIFICATIONS
Ambient Temperature ta -40 25 50 ºC
Case Temperature tc 88 ºC Measured at tc point as indicated on the product label
Storage Temperature ts -40 25 80 ºC Cool down before operating
Relative Humidity 20 85 %
IP Rating 67 - Suitable for outdoor environment
Expected Lifetime (e-cap) 50,000 hrs At tc ≤ 74 ºC, full load
MTBF
520,000 hrs At ta = 25 ºC, full load
200,000 hrs At ta = 50 ºC, full load
Dimensions L x W x H
10.16 x 2.68 x 1.33 inch
258 x 68 x 33.9 mm
Net Weight 850 g ±30g
2. Safety Standards
Safety standard Description
KS C 7655, K 61347-1, K 61347-2-13, K 62384 Safety Standards
KS C CISPR 15, KS C IEC 61547, KN 15, KN 61547 EMC Standards
5
80V 90V 153V
700mA
Vout[V]
Iout[A]
100V
0 88.5%
89.0%
89.5%
90.0%
90.5%
91.0%
91.5%
92.0%
92.5%
93.0%
93.5%
80V 90V 120V
Eff
icie
ncy
(%)
Load
120Vac
220Vac
277Vac
0.820
0.840
0.860
0.880
0.900
0.920
0.940
0.960
0.980
1.000
80V 90V 120V
Pow
er
Fact
or
Load
120Vac
220Vac
277Vac0.0%
2.0%
4.0%
6.0%
8.0%
10.0%
12.0%
80V 90V 120V
Tota
l H
arm
onic
Dis
tort
ion(%
)
Load
120Vac
220Vac
277Vac
3. Typical Characteristics Graphs
a) Operating Window b) Efficiency vs. Load
c) PF vs. Load d) THD vs. Load
6
4. Reliability
Test Items and Conditions
Test Item Specification Condition
Leakage Current < 0.5 mA
Earth Continuity < 0.1 Ω
Hi-Pot
Input – Output 3750 Vac, 60 s, cut-off current 10 mA
Input – Case 3750 Vac, 60 s, cut-off current 10 mA
Insulation Resistance
Input – Output 500 Vdc, 60 s, insulation resistance 10 MΩ
Input – Case 500 Vdc, 60 s, insulation resistance 10 MΩ
Output – Case 500 Vdc, 60 s, insulation resistance 10 MΩ
Surge
L / N ±6 kV
LN / FG ±8 kV
ESD
Contact ±6 kV
150 pF / 300 Ω
Air ±10 kV
7
LED Driver
L
E
N
Live
F.G.
Neutral
CH1 LED-CH1 LED+CH2 LED-CH2 LED+
LED Module 1
LED Module 2
5. Outline Drawing & Dimension
a) Dimension (mm)
b) Wiring
Name Feature Color Purpose
CH1 LED- Channel 1, Negative output Blue Power ground 1
CH1 LED+ Channel 1, Positive output Red Supply power to LED module 1
CH2 LED- Channel 2, Negative output White Power ground 2
CH2 LED+ Channel 2, Positive output Brown Supply power to LED module 2
LED Connector :
KET MG610331
8
6. Label Structure
7. Packing Structure
Packing material Max. quantity (pcs)
Dimension (mm)
Length Width Height
Outer Box 10 440 315 118
Pallet 480 1130 1130 117
8. Precautions in Handling & Use
1) To prevent the LED Driver from any defect, please handle and store it with care
Do not drop or give shock
Do not store in very humid location or at extreme temperature
Do not open or disassemble the product
2) Static electricity or surge voltage may damage the components inside LED Driver, as such please observe proper anti-
electrostatic working process
People handing the Driver should be well grounded (e.g. using ESD wrist band) and wear anti-static working
clothes and gloves
All related devices and instruments in the production line should be well grounded (e.g. working table, measuring
equipment, assembly jigs)
3) Observe the correct polarity of output terminal
4) Avoid input voltage exceeds the maximum rating, which will cause damage to the circuit and result in malfunction
Legal and additional information.
About Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd inspires the world and shapes
the future with transformative ideas and technologies.
The company is redefining the worlds of TVs, smartphones,
wearable devices, tablets, digital appliances, network systems,
and semiconductor and LED solutions. For the latest news,
please visit the Samsung Newsroom at http://news.samsung.com.
Copyright © 2017 Samsung Electronics Co., Ltd. All rights reserved.
Samsung Electronics reserves the right to modify, at its sole discretion,
the design, packaging, specifications and features shown herein without
notice at any time.
Samsung Electronics Co., Ltd.
Samsung-ro, Giheung-gu
Yongin-si, Gyeonggi-do, 17113
KOREA
www.samsungled.com