other safety matting options protect your...
TRANSCRIPT
NZ Compliant
Low Maintenance
Non-slip Surface
All Weather Surface
Choice of Quality Systems
Options to Suit Your Budget
Equal Access
Proudly NZ Designed and Made
PLAYGROUND SAFETY
SURFACING
Other Safety Matting Options
Tiles
Manufactured in one metre squares 15-40mm in thickness.
Easily self installed to keep costs to a minimum.
Suitable for laying over concrete, asphalt or a stable prepared base.
Impact Matting
Designed to provides a permanent cost effective solution.
Eliminates scuff zone maintenance in bark play areas.
Suitable for swings and slides.
Ramp Matting
Provides traction for foot traffic and wheelchairs in wet or damp areas
and inclines. Ideal for decks, steps and pathways.
Modular Long Run
Supplied ex-factory in rolls precut to your individual specifications.
This product can be easily self-installed if required.
An anti-stumble edge ramping is available on request.
22 Poutini Street
Wanganui, New Zealand
Telephone (06) 343 8570
Fax (06) 343 7136
Email: [email protected]
www.burgessmatting.co.nz
0800 80 85 70www.burgessmatting.co.nz
P R O T E C T Y O U R C H I L D R E N
S a f e b o n d S y s t e m P e r m a b o n d S y s t e m
Permabond Features:
• Topcoat made from 100% synthetic EPDM rubber.
• Surface texture resembles small ball bearing size chips.
• Porous surface allows fast, efficient drainage of large
volumes of water.
• Standard colours red and red/ black mix.
• 16 permanent vibrant colours available.
• Use a Permabond surface where child safety, reduced maintenance,
drainage, appearance and colour are the most important factors.
Safebond Features:
• Hard wearing 100% recycled rubber surface.
• Surface texture resembles rice grains.
• Allows surface contaminates to be easily removed.
• Available colours: red, green, black, grey and sand.
• Use a Safebond surface where child safety, reduced
maintenance and budget are the most important factors.
Wet-Pour Systems
Wet-Pour Systems are virtually seamless, non-slip rubber surfaces installed on-site by our own experienced technicians.
The matting is installed standard at a minimum 50mm thickness. The Burgess Matting systems are high quality products both
in effectiveness, appearance and durability to provide the ultimate solution for safety in the playground.
25mmHitting the ground
50mmNo bottoming out
A thicker impact absorption area is good reason to purchase the Burgess system