organisation - imamhomepage.org 2017... · the measurement of weld surface geometry m. randić, d....

ORGANISATION

Conference Chairman

Carlos Guedes Soares, IST, Universidade de Lisboa, Portugal

Technical Programme Committee

Moustafa Abdel-Maksoud, TU Harburg, Germany Ahmet Dursun Alkan, Yildiz University, Turkey Felice Arena, University of Mediterranea of Reggio Calabria, Italy Eugen Bârsan, Constantza Maritime University, Romania Ermina Begovic, Univ of Naples, Italy Kostas Belibassakis, NTUA, Greece Marco Biot, Università degli Studi di Trieste, Italy Rui Carlos Botter, Univ de São Paulo, Brazil Francisco del Castillo, Fundación Soermar, Spain Nastia Degiuli, University of Zagreb, Croatia Roko Dejhalla, University of Rijeka, Croatia Leonard Domnisoru, UGAL, Romania Cesar Ducruet, Paris Geo, CNRS, France Selma Ergin, Istanbul Techn. Univ., Turkey R. Cengiz Ertekin, Univ of Hawaii at Manoa, USA Stefano Ferraris, Fincantieri, Italy Massimo Figari, University of Genova, Italy Juana Fortes, LNEC, Portugal Emilio Campana, INSEAN, Italy Yordan Garbatov, IST, ULisboa, Portugal Petar Georgiev, TU Varna, Bulgaria José Gordo, IST, ULisboa, Portugal Omer Goren, Istanbul Techn. Univ., Turkey Gregory Grigoropoulos, NTUA, Greece Stein Haugen, NTNU, Norway Dimitrios Konovessis, Nanyang Techn Univ, Singapore Pentti Kujala, Aalto University, Finland Jean-Marc Laurens, ENSTA BRETAGNE, France

Heba Leheta, Alexandria University, Egypt Ould El Moctar, Univ of Duisburg, Germany Lorenzo Moro, Memorial University, Canada Nikitas Nikitakos, University of the Aegean, Greece Luis R. Núñes Rivas, ETSIN, Univ Poli Madrid, Spain Andrea Orlandi, Consorzio LaMMA, Florence, Italy Joško Parunov, University of Zagreb, Croatia Fernando López Peña, University A Coruña, Spain Francisco T. Pinto, Univ. of Porto, Portugal Floriano C.M. Pires Jr, Univ Fed Rio de Janeiro, Brazil Jasna Prpić-Oršić, Univ of Rijeka, Croatia Vincent Rey, Univ Toulon, France Cesare Rizzo, University of Genova, Italy Enrico Rizzuto, Univ. of Naples, Italy Germán A.R. Rodríguez, Univ Las Palmas Gran Canaria, Spain Eugen Rusu, UGAL, Romania Antonello Sala, CNR, Italy Antonio Scamardella, University di Napoli "Parthenope", Italy Kostas Spyrou, NTUA, Greece Nikolas Ventikos, NTUA, Greece Michele Viviani, University of Genova, Italy Xinping Yan, Wuhan University of Technology, China Ermal Xhelilaj, University of Vlora, Albania Panos Yannoulis, OCEANKING Technical & Trading SA, Greece Klaas Visser, TUD, Netherlands

Local Organising Committee

Ângelo Teixeira, IST, ULisboa, Portugal Dina Dimas, Arsenal do Alfeite, Portugal Miguel Morgado, Bureau Veritas, Portugal António Oliveira, Transinsular, Portugal Paulo Parracho, DGRM, Portugal

Pedro Ponte, APSS, Portugal Tiago A. Santos, IST, ULisboa, Portugal Abel Simões, ENIDH, Portugal Paulo Viana, DNV GL, Portugal

Technical Programme & Conference Secretariat

Maria de Fátima Pina, IST, ULisboa, Portugal Sandra Ponce, IST, ULisboa, Portugal

Bárbara Azevedo, IST, ULisboa, Portugal Bruna Covelas, IST, ULisboa, Portugal Sónia Vicente, IST, ULisboa, Portugal

SCHEDULE AT A GLANCE

Monday, 9 October 2017 Registration (Hall 01 – from 8h00 onwards)

Opening Session (09h00-09h30) - Auditorium

Plenary Session 1 (09h30-10h30) – Auditorium Keynote Lecture 1 & 2

Coffee-Break (10h30-11h00)

Plenary Session 2 (11h00-12h30) – Auditorium Keynote Lecture 3, 4 & 5

Lunch (12h30-14h00) 02.1 (14h00-15h30)

Shipbuilding & Repair 1

02.2 (14h00-15h30)

Hydrodynamics - CFD 1

02.3 (14h00-15h30) Special Session in Honour

of Prof. Vedran Zanic

01.1 (14h00-15h30)

Ports 1

Coffee-Break (15h30-16h00) 02.1 (16h00-17h30)

Shipbuilding & Repair 2 02.2 (16h00-17h30)

Hydrodynamics - CFD 2 02.3 (16h00-17h30)

Ship Structures 01.1 (16h00-17h30)

Ports 2

Tuesday, 10 October 2017 Registration (Hall 01 – from 8h00 onwards) 02.1 (09h00-10h30)

Ship Design 1

02.2 (09h00-10h30)

Hydrodynamics 1

02.3 (09h00-10h30) Ship Structures –

Fatigue 1

01.1 (09h00-10h30)

Maritime Transportation


Ship Design 2

02.2 (11h00-12h30)

Hydrodynamics 2

02.3 (11h00-12h30) Ship Structures –

Fatigue 2

01.1 (11h00-12h30)

Maritime Traffic Models 1

Lunch (12h30-14h00) 02.1 (14h00-15h30)

Special Session in Honour of Prof. Petar Kolev

02.2 (14h00-15h30)

Hydrodynamics - Foils

02.3 (14h00-15h30)

Composite Materials

01.1 (14h00-15h30)

Maritime Traffic Models 2


Ship Design 3

02.2 (16h00-17h30) Hydrodynamics - Weather Routing

02.3 (16h00-17h30)

Offshore Oil & Gas

01.1 (16h00-17h30) Maritime Safety and

Human Factors 1

Meeting of IMAM Executive Committee (17h30-18h30)

Conference Dinner (20h00)

Wednesday, 11 October 2017 Registration (Hall 01 – from 8h00 onwards) 02.1 (09h00-10h30)

Ship Lifecycle Design 1

02.2 (09h00-10h30) Hydrodynamics -

Seakeeping

02.3 (09h00-10h30)

Machinery & Control 1

01.1 (09h00-10h30) Maritime Safety and

Human Factors 2



02.2 (11h00-12h30) Hydrodynamics -

Manoeuvring

02.3 (11h00-12h30)


01.1 (11h00-12h30)

Marine Environment

Lunch (12h30-14h00) 02.1 (14h00-15h30)


02.2 (14h00-15h30)

Offshore Renewable Energy 1

02.3 (14h00-15h30) Special Session in Honour of Prof.

Giovanni Benvenuto

01.1 (14h00-15h30)

Wave Modelling


02.2 (16h00-17h30) Offshore Renewable

Energy 2

02.3 (16h00-17h30)


01.1 (16h00-17h30)

Fisheries

IMAM General Assembly (17h30-18h30)

End of IMAM 2017 Conference

SESSIONS IN ALPHABETICAL ORDER Composite Materials - Tuesday, 10/10/2017, 14h00, Room 02.3

Fisheries - Wednesday, 11/10/2017, 16h00, Room 01.1

Hydrodynamics 1 - Tuesday, 10/10/2017, 09h00, Room 02.2

Hydrodynamics 2 - Tuesday, 10/10/2017, 11h00, Room 02.2

Hydrodynamics - CFD 1 - Monday, 09/10/2017, 14h00, Room 02.2

Hydrodynamics - CFD 2 - Monday, 09/10/2017, 16h00, Room 02.2

Hydrodynamics Foils - Tuesday, 10/10/2017, 14h00, Room 02.2

Hydrodynamics - Manoeuvring - Wednesday, 11/10/2017, 11h00, Room 02.2

Hydrodynamics - Seakeeping - Wednesday, 11/10/2017, 09h00, Room 02.2

Hydrodynamics - Weather Routing Tuesday, 10/10/2017, 16h00, Room 02.2

Keynote Lectures 1 & 2 - Monday, 09/10/2017, 09h30, Room Auditorium

Keynote Lectures 3, 4 & 5 - Monday, 09/10/2017, 11h00, Room Auditorium

Machinery & Control 1 - Wednesday, 11/10/2017, 09h00, Room 02.3



Marine Environment - Wednesday, 11/10/2017, 11h00, Room 01.1

Maritime Safety & Human Factors 1 - Tuesday, 10/10/2017, 16h00, Room 01.1

Maritime Safety & Human Factors 2 - Wednesday, 11/10/2017, 09h00, Room 01.1

Maritime Traffic Models 1 - Tuesday, 10/10/2017, 11h00, Room 01.1

Maritime Traffic Models 2 - Tuesday, 10/10/2017, 14h00, Room 01.1

Maritime Transportation - Tuesday, 10/10/2017, 09h00, Room 01.1

Offshore Oil & Gas - Tuesday, 10/10/2017, 16h00, Room 02.3

Offshore Renewable Energy 1 - Wednesday, 11/10/2017, 14h00, Room 02.2

Offshore Renewable Energy 2 - Wednesday, 11/10/2017, 16h00, Room 02.2

Ports 1 - Monday, 09/10/2017, 14h00, Room 01.1

Ports 2 - Monday, 09/10/2017, 16h00, Room 01.1

Ship Design 1 - Tuesday, 10/10/2017, 09h00, Room 02.1



Ship Lifecycle Design 1 - Wednesday, 11/10/2017, 09h00, Room 02.1



Shipbuilding & Repair 1 - Monday, 09/10/2017, 14h00, Room 02.1

Shipbuilding & Repair 2 - Monday, 09/10/2017, 16h00, Room 02.1

Ship Structures - Monday, 09/10/2017, 16h00, Room 02.3

Ship Structures - Fatigue 1 - Tuesday, 10/10/2017, 09h00, Room 02.3

Ship Structures - Fatigue 2 - Tuesday, 10/10/2017, 11h00, Room 02.3

Special Session in Honour of Prof. Giovanni Benvenuto - Wednesday, 11/10/2017, 14h00, Room 02.3

Special Session in Honour of Prof. Petar Kolev - Tuesday, 10/10/2017, 14h00, Room 02.1

Special Session in Honour of Prof. Vedran Zanic - Monday, 09/10/2017, 14h00, Room 02.3

Wave Modelling - Wednesday, 11/10/2017, 14h00, Room 01.1

IMAM 2017 Programme Monday, 9 October 2017

9h00-09h30 - Auditorium Opening Session Opening Address, C. Guedes Soares

09h30-10h30 - Auditorium Plenary Session 1: Keynote Lecture 1 & 2 Chair: C. Guedes Soares

Green maritime logistics, Harilaos N. Psaraftis, Technical University of Denmark, Denmark Latest developments on cruise ship design, Maurizio Cergol, Fincantieri SpA, Italy


11h00-12h30 - Auditorium Plenary Session 2: Keynote Lecture 3, 4 & 5

Chair: C. Guedes Soares

An overview of design and construction of mega yachts, Lorenzo Pollicardo, Nautica Italiana, Italy Current development trends of aquaculture structures, Vegard Aksnes, SINTEF, Norway Deep sea mining, Henk van Muijen, IHC Mining BV, The Netherlands

Coffee-Break (12h30-14h00) 14h00-15h30 (02.1): Shipbuilding & Repair 1 Chairs: D. Pavletić, J.M.Gordo

14h00-15h30 (02.2): Hydrodynamics - CFD 1 Chairs: N. Degiuli, S. Wang

14h00-15h30 (02.3): Special Session in Honour of Prof. Vedran Zanic Chairs: P. Prebeg, M. Ćorak

14h00-15h30 (01.1): Ports 1 Chairs: H. Psaraftis, T.A. Santos

Lean thinking in shipbuilding: multiple case studies in Brazilian shipyards J.L. Francisco & R.C. Botter

A tool for analysis of costs on the manufacturing of the hull J.M. Gordo & M. Leal

A novel project scheduling model for shipbuilding M. Kafalı, Y. Unsan & I.H. Helvacıoğlu

Shipbuilder country and second hand price: Some empirical evidences R.B. Fiasca, L.F. Assis & F.C.M. Pires Jr.

Self-propulsion simulation of DARPA Suboff A. Dogrul, S. Sezen, C. Delen & S. Bal

Prediction of ship resistance in head waves using OpenFOAM H. Islam & C. Guedes Soares

Supporting development of the smart ship technology by CFD simulation of ship behavior in close to real operational conditions, K. Niklas

CFD method approach for ducted propeller optimization of a ROV A. Bahatmaka, A.R. Prabowo, D.-J. Kim & S. Samuel

Multi-objective scantling optimization of a passenger ship structure J. Andric, P. Prebeg & T. Stipic

Practical ship hull structural scantling optimization using ABS-HSNC criteria T. McNatt, M. Ma, J. Shaughnessy & K. Stone

Framework for risk-based salvage operation of damaged oil tanker after collision in the Adriatic Sea, J. Parunov, S. Rudan, M. Ćorak, B.B. Primorac & M. Katalinić

Parametric equations for the design of a logistic support platform T.S. Hallak, M. Ventura & C. Guedes Soares

A conceptual framework for port assessment X. Bellsolà Olba, W. Daamen, S.P. Hoogendoorn & T. Vellinga

Liner service operational differentiation in container port terminals A.M.P. Carreira & C. Guedes Soares

Technological processes inside a ro-ro ferry terminal V. Stupalo, N. Kavran & M.B. Skočibušić

Methodology for the identification of the potential hinterland of container terminals T.A. Santos & C. Guedes Soares

Coffee-Break (15h30-16h00) 16h00-17h30 (02.1): Shipbuilding & Repair 2 Chairs: P. Lindström, J.M.Gordo

16h00-17h30 (02.2): Hydrodynamics - CFD 2 Chairs: M. Arai, K.A. Belibassakis

16h00-17h30 (02.3): Ship Structures Chairs: A. Zayed, P. Viana

16h00-17h30 (01.1): Ports 2 Chairs: R.C. Botter, T.A. Santos

Cutting processes in shipbuilding—a case study A. Oliveira & J.M. Gordo

The measurement of weld surface geometry M. Randić, D. Pavletić & G. Turkalj

Estimating flow-induced noise of a circular cylinder using numerical and analytical acoustic methods S. Ergin & S. Bulut

Cavitation analyses of DTMB 4119 propeller with LSM and URANS approach S. Sezen & S. Bal

Assessment of the residual strength of ships after damage M. Attia, A. Zayed, H. Leheta & M. Abd Elnaby

Analysis of structural crashworthiness on a non-ice class tanker during stranding accounting for the sailing routes A.R. Prabowo, A. Bahatmaka, J.H. Cho, J.M. Sohn, D.M. Bae, S. Samuel & B. Cao

Sustainable urban logistics for efficient and environmentally friendly port-cities A. Anagnostopoulou, E. Sdoukopoulos & M. Boile

A green port—case study of Port of Koper E. Twrdy & E. Hämäläinen

IMAM 2017 Programme Monday, 9 October 2017

Implementation of new production processes in panel’s line A. Oliveira & J.M. Gordo

Controlling ship repair projects using the S-curve envelope J.R. San Cristóbal

Simulation dependency on degrees of freedom in RaNS solvers for predicting ship resistance H. Islam & H. Akimoto

CFD analysis of a fixed floating box-type structure under regular waves J.F.M. Gadelho, S.C. Mohapatra & C. Guedes Soares

Ultimate bending capacity of multi-bay tubular reinforced structures S. Saad-Eldeen, Y. Garbatov & C. Guedes Soares

Experimental investigation on explosive welded joints for shipbuilding applications P. Corigliano, V. Crupi, E. Guglielmino & A.M. Sili

Challenges for implementation of the green corridor in Brazil D.A. Moura, R.C. Botter & J.F. Netto

Commercial maritime ports with innovative mooring technology E. Díaz-Ruiz-Navamuel, A.O. Piris, C.A. Pérez-Labajos, L.S. Ruiz & B.B. Rojo

Welcome Reception (17h30)

IMAM 2017 Programme Tuesday, 10 October 2017

09h00-10h30 (02.1): Ship Design 1 Chairs: L. Pollicardo, P. Georgiev

09h00-10h30 (02.2): Hydrodynamics 1 Chairs: K.A. Belibassakis, S. Sutulo

09h00-10h30 (02.3): Ship Structures – Fatigue 1 Chairs: P. Dong, Y. Garbatov

09h00-10h30 (01.1): Maritime Transportation Chairs: R.C. Botter, A. Simões

Systems engineering-based feasibility study for development of ballast water-free vessels H.J. Kang, J. Choi, H. Ahn & K. Kim

A research on the sewage problems of cruise ships in the Mediterranean V. Sahin & N. Vardar

Novel concepts of river-sea cruise passenger vessels for Russian rivers, Caspian, Black and Mediterranean seas G.V. Egorov, I.A. Ilnitskiy & Ya.V. Kalugin

Optimum structural design and building cost of small boats: Comparison between steel and aluminum A.T. Mousa, A. Naguib & S.H. Hegazi

The effect of the stern shape and propeller location on the propulsive efficiency of a blunt ship G. Bilici & U.O. Ünal

Modeling of performance of an AUV stealth vehicle. Design for operation M.K. Gerigk

Contributes to sailing yacht performance by foil hydrodynamic lift C. Bertorello & E. Begovic

A new procedure of power prediction based on Van Oortmerssen regression B. Xhaferaj & A. Dukaj

Round robin study on spectral fatigue assessment of butt-welded joints J. Rörup, Y. Garbatov, Y. Dong, E. Uzunoglu, G. Parmentier, A. Andoniu, Y. Quéméner, K.-C. Chen, S. Vhanmane, A. Negi, Y. Parihar, R. Villavicencio, V. Parsoya, L. Peng & J. Yue

Approximation of maximum weld induced residual stress magnitude by the use of Meyer hardness P.R.M. Lindström

Fatigue life prediction method of fairleads installed on a FPSO J. Yue, P. Chen, Y. Liu & W. Mao

Fatigue reliability of butt-welded joints based on spectral fatigue damage assessment Y. Garbatov, Y. Dong, J. Rörup, S. Vhanmane & R. Villavicencio

Integrated transportation system under seasonality effects J.M. Zampirolli, T.N. Mathias & R.C. Botter

The impact of the Maritime Labour Convention in the maritime transport S. Santos & A. Simões

A case study on the capacity of a Brazilian iron ore port distribution center in Asia J.F. Netto & R.C. Botter

A simulation approach applied to the optimization of offshore crew transportation problems A.M.P. Santos, L.M.R. Silva, T.A. Santos & C. Guedes Soares



11h00-12h30 (02.1): Ship Design 2 Chairs: M. Ventura, D. Dimas

11h00-12h30 (02.2): Hydrodynamics 2 Chairs: J. Prpić Oršić, S. Wang

11h00-12h30 (02.3): Ship Structures – Fatigue 2 Chairs: J. Rörup, P. Lindström

11h00-12h30 (01.1): Maritime Traffic Models 1 Chairs: J. Montewka, J. Mou

Fuel or acceleration: A Pareto design procedure for ships S. Calisal

Modification of traditional catamaran to reduce total resistance: Configuration of centerbulb S. Samuel, D.-J. Kim, M. Iqbal, A. Bahatmaka & A.R. Prabowo

Matching engine to propeller for an LNGC under rough weather C.H. Marques, C.R.P. Belchior & J.-D. Caprace

Concept of river-sea combined vessel for carriage of oil products and dry cargoes G.V. Egorov, V.I. Tonyuk & E.Yu. Durnev

An investigation on a Mathieu-type instability in irregular seas: The case of a tension leg platform J.C. Pérez & M.A.S. Neves

On the influence of the parametric roll resonance on the principal wave-induced loads M. Acanfora & T. Coppola

Experimental and numerical study of sloshing and swirling in partially filled membrane-type LNG tanks M. Arai, G.M. Karuka & H. Ando

Multibody dynamics of floaters during installation of a spar floating wind turbine M.A.A.A. Hassan & C. Guedes Soares

Analytical treatment of welding distortion effects on fatigue in thin panels: Part I - closed-form solutions and implications P. Dong, S. Xing & W. Zhou

Analytical treatment of welding distortion effects on fatigue in thin panels: Part II -applications in test data analysis P. Dong, W. Zhou & S. Xing

Nonlinear FEA of weld residual stress influence on the crack driving force P.R.M. Lindström & E. Østby

Assessment of distortion and residual stresses in butt welded plates made of different steels M. Hashemzadeh, Y. Garbatov & C. Guedes Soares

Mapping of the ship collision probability in the Strait of Istanbul based on AIS data Y.C. Altan & E.N. Otay

Risk assessment methods for ship collision in estuarine waters using AIS and historical accident data P. Chen, J. Mou & P.H.A.J.M. van Gelder

Risk analysis for maritime traffic in the Strait of Gibraltar and improvement proposal N. Endrina Sanchez, J.C. Rasero & J. Montewka

Non-linear velocity obstacles with applications to the maritime domain Y. Huang & P.H.A.J.M. van Gelder

Lunch (12h30-14h00)

14h00-15h30 (02.1): Special Session in Honour of Prof. Petar Kolev Chairs: P. Georgiev, Y. Garbatov

14h00-15h30 (02.2): Hydrodynamics – Foils Chairs: S. Calisal, S. Sutulo

14h00-15h30 (02.3): Composite Materials Chairs: J.M. Gordo, L. Sutherland

14h00-15h30 (01.1): Maritime Traffic Models 2 Chairs: J. Montewka, A.P. Teixeira

Ship design, decades of development T. Damyanliev & P. Georgiev

Challenges in stability assessment of offshore floating structures T.M. Hendriks & J.M. Santos

Offshore sulfide power plant for the Black Sea L. Stoev, P. Georgiev & Y. Garbatov

A BEM for calculating the effects of waves on WIG marine craft performance K.A. Belibassakis

Ground effect or grounding: Which happens when? O.K. Kinaci, T. Cosgun, A. Yurtseven & N. Vardar

The effect of geometric and manufacturing parameters on filament wound composites split disk test results A.Z. Papadakis, J.G. Themelakis & N.G. Tsouvalis

Rheological testing of UV cure using two different sources of light C. Gracia-Fernández, S. Gómez-Barreiro, A. Díaz-Díaz, A. Álvarez-García, J. Tarrío-Saavedra, J. López-Beceiro, R. Artiaga & B. Sánchez-Silva

Dynamic risk assessment for nautical traffic M. Li, J. Mou, Y. He, F. Ning, Y. Xiong & P. Chen

Challenges in modelling characteristics of maritime traffic in winter conditions and new solution proposal J. Montewka, R. Guinness, L. Kuuliala, F. Goerlandt, P. Kujala & M. Lensu


Parametric modelling of tanker internal compartment layout for survivability improvement within the framework of regulations H. Jafaryeganeh, M. Ventura & C. Guedes Soares

Estimation of planning forces in numerical and full scale experiment A. Caramatescu, C.I. Mocanu, F.D. Pacuraru & G. Jagîte

Effect of chordwise flexibility on flapping foil thruster performance by discrete vortex method A.K. Priovolos, E.S. Filippas & K.A. Belibassakis

A review of the applications composite materials in wave and tidal energy devices M. Calvário, L.S. Sutherland & C. Guedes Soares

A simple rheological method for comparing hot melt adhesives S. Gómez-Barreiro, A. Díaz-Díaz, A. Álvarez-García, C. Gracia-Fernández & B. Sánchez-Silva

A model for predicting ship destination routes based on AIS data H. Rong, A.P. Teixeira & C. Guedes Soares

AIS data analysis for the impacts of wind and current on ship behavior in straight waterways Y. Zhou, T. Vellinga, W. Daamen & S.P. Hoogendoorn

Coffee-Break (15h30-16h00) 16h00-17h30 (02.1): Ship Design 3 Chairs: S. Calisal, M. Ventura

16h00-17h30 (02.2): Hydrodynamics – Weather Routing Chairs: M. Acanfora, R.Vettor

16h00-17h30 (02.3): Offshore Oil & Gas Chairs: M.I. Lourenço, R. Baptista

16h00-17h30 (01.1): Maritime Safety and Human Factors 1 Chairs: A.P. Teixeira, J. Mou

Fuel cells applied to autonomous underwater vehicles. Endurance expansion opportunity A. Villalba-Herreros, J. Arévalo-Fuentes, G. Bloemen, R. Abad & T.J. Leo

Economic feasibility of an autonomous container ship T.A. Santos & C. Guedes Soares

Optimization of container stowage using simulated annealing and genetic algorithms M.A. Yurtseven, E. Boulougouris, O. Turan & N. Papadopoulos

Ship weather routing focusing on propulsion energy efficiency N. Lamprinidis & K.A. Belibassakis

Influence of the approximated mass characteristics of a ship on the added resistance in waves I. Martić, N. Degiuli, P. Komazec & A. Farkas

A ship weather-routing tool for route evaluation and selection: Influence of the wave spectrum E. Spentza, G. Besio, A. Mazzino, T. Gaggero & D. Villa

Progress in weather routing and future challenges (ORAL PRESENTATION) R. Vettor and C. Guedes Soares

Review of leakage detection methods for subsea pipeline A.M. Shama, A. El-Rashid, M. El-Shaib & D.M. Kotb

Analysis of accidental fluid release scenarios in FPSOs U. Bhardwaj, A.P. Teixeira & C. Guedes Soares

Experimental study for leakage detection in subsea pipeline by applying acoustic emission technique A.M. Shama, M. El-Shaib, A. Sharara & D.Y. Nasser

Helicopter fleet size and mix vehicle routing problem for crew exchange in an offshore oil and gas field L.M.R. Silva & C. Guedes Soares

Causation analysis of ship collision accidents using a Bayesian Network approach S. Gong, J. Mou & X. Zhang

Incorporation of safety barrier and HFCAS to human error analysis of major maritime accidents in China B. Wu, L.K. Zong, X.P. Yan & Y. Wang

Risks in the repair of oil tankers and their prevention J.A. Fraguela-Formoso, L.C. Couce, C. Álvarez-Feal, L. Castro-Santos & A.L. Arranz

Decision support tool for modelling security scenarios onboard passenger ships I. Gypa, E. Boulougouris & D. Vassalos

Meeting of the IMAM Executive Committee (17h30)

Conference Dinner (20h00)

IMAM 2017 Programme Wednesday, 11 October 2017

09h00-10h30 (02.1): Ship Lifecycle Design 1 Chairs: U.R. Bharadwaj, Y. Garbatov

09h00-10h30 (02.2): Hydrodynamics - Seakeeping Chairs: M.A.S. Neves, S. Wang

09h00-10h30 (02.3): Machinery & Control 1 Chairs: F.L. Pena, I. Lazakis

09h00-10h30 (01.1): Maritime Safety and Human Factors 2 Chairs: F. Goerlandt, N.Ventikos

Ship Lifecycle Software Solutions (SHIPLYS) - an overview of the project, its first phase of development and challenges U.R. Bharadwaj, T. Koch, A. Milat, L. Herrera, G. Randall, C. Volbeda, Y. Garbatov, S. Hirdaris, N. Tsouvalis, A. Carneros, P. Zhou & I. Atanasova

Optimisation of operational modes of short-route hybrid ferry: A life cycle assessment case study H. Wang, E. Oguz, B. Jeong & P. Zhou

Framework for conceptual ship design accounting for risk-based life cycle assessment Y. Garbatov, M. Ventura, C. Guedes Soares, P. Georgiev, T. Koch & I. Atanasova

Lifecycle and virtual prototyping requirements for ship repair projects A. Porras, L. Herrera, A. Carneros & J.I. Zanón

SHIPLYS end-users’ requirements to inform software development A. Milat & N.G. Klanac

Influences of a bow turret system on an FPSO’s pitch RAO T.S. Hallak & A.N. Simos

Comparison of two approaches for prediction of wave induced loads in damaged ships H. Jafaryeganeh & C. Guedes Soares

Seakeeping performance of a Mediterranean fishing vessel D. Obreja, R. Nabergoj, L. Crudu & L. Domnisoru

Hydrodynamics performance of high speed multi-hulls in waves G. Vernengo, C.M. Apollonio, D. Bruzzone, L. Bonfiglio & S. Brizzolara

Modeling the refrigeration system of a maritime container S. Amat, M.J. Legaz & E. Morilla

Path-planning and path-following control system for autonomous surface vessel M.A. Hinostroza, H.T. Xu & C. Guedes Soares

A speed control for an autonomous ship model for hydrodynamic testing F.L. Pena, B. Priego & A. Deibe

Hierarchical control for ship navigation under winds: A case in the Three Gorges Reservoir area D. Jiang

Trends and needs for research in maritime risk S. Haugen, N.P. Ventikos, A.P. Teixeira & J. Montewka

Maritime search, rescue and assistance A. Anechitoae, A.A. Cîmpanu & M.S. Matasa

An approach for an integrated assessment of maritime accidental oil spill risk and response effectiveness for the Northern Baltic Sea F. Goerlandt, L. Lu, O.A.V. Banda & J. Rytkönen

Scenario-based oil spill response model for Saimaa inland waters J. Halonen & J. Kauppinen


11h00-12h30 (02.1): Ship Lifecycle Design 2 Chairs: D. Lyridis, P. Zhou

11h00-12h30 (02.2): Hydrodynamics - Manoeuvring Chairs: M.K. Gerigk, S. Sutulo

11h00-12h30 (02.3): Machinery & Control 2 Chairs: S. Ergin, S.R. Silva

11h00-12h30 (01.1): Marine Environment Chairs: J.A. Santos, L. Rusu

Challenges and problems with data availability and quality during LCCA calculations in the early ship design phases P. Evangelou, C. Papaleonidas, D.V. Lyridis, N. Tsouvalis & P. Anaxagorou

Investment cost estimate accounting for shipbuilding constraints Y. Garbatov, M. Ventura, P. Georgiev, T. Damyanliev & I. Atanasova

Innovative systems improving safety of manoeuvring and berthing operations of inland vessels T. Abramowicz-Gerigk & Z. Burciu

Experimental and numerical simulations of zig-zag manoeuvres of a self-running ship model M.A. Hinostroza, H.T. Xu & C. Guedes Soares

Biomimetic propulsion as an innovative horizon in water vehicles development G. Ilieva & I. Kostova

A hybrid ROV/UAV vehicle for underwater inspection and maintenance of offshore structures F.L. Peña & H. Ramos

Development, calibration and validation of a model for the acoustic field generated by a ship in port, T. Coppola, F. Quaranta, E. Rizzuto, M. Viscardi & D. Siano

The relation of coastal spatial planning and blue growth and the resolution of the arising conflicts in a coastal area E. Kostopoulou & F. Sakellariadou


A framework for Multi-Criteria Decision Analysis (MCDA) applied to conceptual stage of ship design X. Cui, U.R. Bharadwaj & P. Zhou

Life cycle and cost assessment on engine selection for an offshore tug vessel E. Oguz, B. Jeong, H. Wang & P. Zhou

Refactoring early ship design methodologies T. Koch & K. Kreutzer

Comparative simulation of definitive manoeuvres of the KVLCC2 benchmark ship using different empiric mathematical models S. Sutulo & C. Guedes Soares

Human factor influence on ship handling errors in restricted waters—stress susceptibility study T. Abramowicz-Gerigk & A. Hejmlich

Splitting costs of a marine diesel engine waste heat recovery system into avoidable and unavoidable parts T. Koroglu & O.S. Sogut

Implementation of a self-learning algorithm for main engine condition monitoring C. Gkerekos, I. Lazakis & G. Theotokatos

Dynamics of sandy beach in dependence on wave parameters O. Kuznetsova, Ya. Saprykina, M. Shtremel, S. Kuznetsov, D. Korzinin, E. Trifonova, N. Andreeva, N. Valchev, B. Prodanov, P. Eftimova, T. Lambev & L. Dimitrov

Marine protected areas-a tool for environmental protection. The case of Milos Island S. Manologlou, T. Pelagidis & B.S. Tselentis

Lunch (12h30-14h00)

14h00-15h30 (02.1): Ship Lifecycle Design 3 Chairs: T. Koch, G. Randall

14h00-15h30 (02.2): Offshore Renewable Energy 1 Chairs: F. Arena, T.P. Mazarakos

14h00-15h30 (02.3): Special Session in Honour of Prof. Giovanni Benvenuto Chairs: M. Altosole, M. Martelli

14h00-15h30 (01.1): Wave Modelling Chairs: C. Juana Fortes, M. Bernardino

Ship concept design tool (ORAL PRESENTATION) M. Ventura

Initial design software (ORAL PRESENTATION) G. Randall

Cafe software (ORAL PRESENTATION) D. Frank

RulesCalc software (ORAL PRESENTATION) S. Hirdaris

Topgallant SYPS (ORAL PRESENTATION) T. Koch

Assessment of seawater electrolytic processes using offshore renewable energies R. d’Amore-Domenech & T.J. Leo

A prospective turbine concept to extract tidal energy G. Ilieva & I. Kostova

Evaluating a novel control strategy to improve the performance of hydraulic power take-offs in wave energy converters M. Kamarlouei, J.F. Gaspar & C. Guedes Soares

Ducted horizontal axis marine turbine design for the race of Alderney J.-M. Laurens, M. Ait-Mohammed & M. Tarfaoui

Waste heat recovery from dual-fuel marine engines M. Altosole, M. Laviola, R. Zaccone & U. Campora

Numerical and experimental investigation for the performance assessment of full electric marine propulsion plant M. Martelli & M. Figari

Manoeuvring model and simulation of the non-linear dynamic interaction between tethered ship and tug during escort B. Piaggio, M. Martelli, M. Viviani & M. Figari

Surrogate models of the performance and exhaust emissions of marine diesel engines for ship conceptual design M. Tadros, M. Ventura & C. Guedes Soares

Evaluating marine climate change in the Portuguese coast during the 20th century M. Bernardino & C. Guedes Soares

Prediction of storm conditions using wind data from the ECMWF and NCEP reanalysis L. Rusu, M. Goncalves & C. Guedes Soares

Wave-bottom-current interaction, effects of the wave vorticity on the Bragg resonance E. Laffitte, B. Simon, V. Rey, J. Touboul & K.A. Belibassakis

Evaluation of the accuracy of the spectral models in predicting the storm events in the Black Sea L. Rusu



16h00-17h30 (02.1): ShipLYS Project Session Chair: U.R. Bharadwaj

16h00-17h30 (02.2): Offshore Renewable Energy 2 Chairs: J.-M. Laurens, J. F. Gaspar

16h00-17h30 (02.3): Machinery & Control 3 Chairs: M. Altosole, F.L. Pena

16h00-17h30 (01.1): Fisheries Chairs: A. Campos, A.P. Teixeira

Participation by invitation only. CAS Discussion.

Hydrodynamic loading and fatigue analysis of an offshore multi-purpose floating structure for offshore wind and wave energy sources exploitation T.P. Mazarakos, D.N. Konispoliatis & S.A. Mavrakos

Non-linear time-domain analysis of a spar floating support for offshore wind turbines under the action of extreme waves C. Ruzzo, D. Triglia & F. Arena

Probabilistic life-cycle assessment for offshore wind turbines B. Yeter, Y. Garbatov & C. Guedes Soares

The synergy between wind and wave power along the coasts of the Black Sea E. Rusu

Assessment of the impact of ship emissions on the air quality in Naples F. Murena, M.V. Prati & F. Quaranta

Forbidden zone handling in optimal thrust allocation of DP vessels M. Valčić & J. Prpić-Oršić

A hybrid controller design for ship autopilot based on free-running model test H.T. Xu, M.A. Hinostroza & C. Guedes Soares

Main drivers of herring fishery in the two neighbouring gulfs of the Northern Baltic Sea T. Raid, L. Järv, J. Pönni & J. Raitaniemi

Round goby Neogobius melanostomus - the insight into recent changes in Estonian coastal sea fishery L. Järv, T. Raid, K. Nurkse, M. Pärnoja & A. Soome

Fishing patterns for a Portuguese longliner fishing at the Gorringe seamount - a first analysis based on AIS data and onboard observations A. Campos, P. Lopes, P. Fonseca, G. Araújo & I. Figueiredo

The impact of different VMS data acquisition rates on the estimation of fishing effort—an example for Portuguese coastal trawlers P. Lopes, A. Campos, P. Fonseca, J. Parente & N. Antunes

Real time fishing activity detection J.C. Ferreira, N. Antunes & P. Lousã

Data mining approach tool in fishing control activity J.C. Ferreira, S. Lage, I. Pinto, P. Lousã & N. Antunes

IMAM General Assembly (17h30)

End of IMAM 2017 Congress

ACCOMPANYING PERSONS’ PROGRAMME

In parallel to the working technical sessions for the Congress participants and to the Congress Programme, IMAM 2017 have organised an Accompanying Persons Programme that includes some of selected tours as well as the social events of the Congress, namely, Welcome Reception and Conference Dinner.

The proposed tours will be an opportunity to visit the surrounding areas of Lisbon, and to take in other areas of Portugal.

A detailed programme is available separately.

Time Monday, 9th

Tuesday, 10th

Wednesday, 11th

09h00

Visit to Alcobaça / Óbidos

Visit to Lisbon

Visit to Mafra / Sintra /

Cabo da Roca / Cascais /

Estoril

09h30

10h00

10h30

11h00

11h30

12h00

13h00

13h00 - 14h00

14h00

Afternoon at your Leisure

14h30

15h00

15h30

16h00

16h30

17h00

17h30

Welcome Reception 18h00

18h30

19h00

19h30

20h00 Conference Dinner

CONFERENCE VENUE

The 17th International Congress of the International Maritime Association of the Mediterranean (IMAM 2017) will be held at the Instituto Superior Técnico’s Congress Centre at the Alameda Campus.

The MAP below shows the location of the IST’s Congress Centre in the Campus, and the location of the Hotel Holiday Inn Lisboa where lunches will be served.

IMAM 2017 will take place at IST’s Congress Centre located on the Lower Ground 1 and Lower Ground 2 Levels, and will be concentrated in the Auditorium (Monday morning) and 4 meeting rooms for the parallel sessions.

Lower Ground 1

IST Congress Centre

Holiday Inn Lisboa

Lower Ground 2

During the 3 days of the Conference, the lunches will be served at the Vasco da Gama Restaurant in the Hotel Holiday Inn Lisboa very close to IST, as shown above.

IMPORTANT CONTACTS Congress Location CENTEC Congress Dinner

IST Congress Centre Instituto Superior Técnico Universidade de Lisboa Avenida Rovisco Pais, Lisboa 1049-001 Tel: +351 218 418 069

Centre for Marine Technology and Ocean Engineering (CENTEC) Instituto Superior Técnico Universidade de Lisboa Avenida Rovisco Pais Lisboa 1049-001 Tel: +351 218 417 468

Quinta do Almirante R. Comandante Sacadura Cabral, 106 Ponte de Frielas 2660-072-Frielas Tel: 219 898 001

WIFI Access: Username: IMAM2017 Password: 3JndmA

Emergency Number: 112

organisation - imamhomepage.org 2017... · the measurement of weld surface geometry m. randić, d....

Documents