of the compact server. - controller general of accounts · 2.2.2 sql server 2008 r2 installation of...

This document list out the Pre-requisites for Setting up of e-Payments through COMPACT which includes Changing the Server Name, Disabling Password Complexity, Changing Workgroup and disabling windows firewall settings. Also included in the document are the Steps for installation of SQL Server 2008 R2 which also includes the necessary Pre-Requisites viz. Installation of the .net Framework and Network Configuration Settings for both the primary server and mirror server before the mirroring process can be started. Subsequently, the step-by-step Mirroring process is explained for setting up of COMPACT for e-payments.

24th August, 2011

Accounts Informatics Division National Informatics Centre

O/o Controller General of Accounts Loknayak Bhawan, Khan Market

New Delhi Ph: 24640085, 24610172

ACCOUNTS INFORMATICS DIVISION

SETUP OF COMPACT SERVERS FOR e-PAYMENTS

NIC-ACID- CPMS-INST 1 of Page 78 Version: 1.01 Release: 20110824

Contents

1. Pre-requisites for Setting up of e-Payments through COMPACT......................... 2

1.1 Backup COMPACT database from the existing COMPACT Server........................ 2

1.2 Change Server Name of Primary and Mirror Servers .......................................... 2

1.2.1 Label Primary and Secondary (Mirror) Servers ................................................... 2

1.2.2 Change Server Name of PRIMARY Server to PCOMP<PPPPPP> .......................... 3

1.2.3 Change Server Name of MIRROR Server to MCOMP<PPPPPP> .......................... 5

1.3 Disabling Password Complexity Requirements ................................................... 7

1.3.1 Primary Server ................................................................................................... 7

1.3.2 Mirror Server ..................................................................................................... 7

1.4 Ensuring both Primary and Mirror Servers reside in the same workgroup .......... 8

1.5 Turning OFF windows Firewall on both Primary and Mirror Servers. ................ 12

2. SQL Server 2008 R2 Installation for both Primary Server and Mirror Server ..... 14

2.1 Primary Server ................................................................................................. 14

2.1.1 Installation of the .net Framework ................................................................... 14

2.1.2 SQL Server 2008 R2 Installation on the Primary Server .................................... 15

2.1.3 Network Configuration Settings of SQL Server 2008 ........................................ 29

2.2 Mirror Server ................................................................................................... 31

2.2.1 Installation of the .net Framework ................................................................... 31

2.2.2 SQL Server 2008 R2 Installation of First Instance (Mirror) ................................ 32

2.2.3 Network Configuration Settings of SQL Server 2008 R2.................................... 46

2.2.4 SQL Server 2008 R2 Installation of Second Instance (Watcher) on the Mirror

Server MCOMP<PPPPPP> ................................................................................ 48

2.2.5 Network Configuration Settings of SQL Server 2008 R2.................................... 62

3. Restoration of COMPACT database backup taken in Step 1 in the Primary Server

and COMPACT e-payment Upgrade Ver.6.01 ................................................... 64

3.1 Restoration of the COMPACT database backup................................................ 64

3.2 COMPACT Ver.6.01 Upgrade ............................................................................ 67

4. COMPACT Database Mirroring ......................................................................... 73




1. Pre-requisites for Setting up of e-Payments through COMPACT 1.1 Backup COMPACT database from the existing COMPACT Server

The COMPACT backup utility is available in the Utilities module of the COMPACT interface as shown above. Please note that the COMPACT Database backup process should be run only from the Server. This form enables the user to take the Backup of the COMPACT Database at the

desired location in the hard disk. On invoking the utility the user is provided with a browse interface to select the

desired location where the COMPACT backup file will be prepared. The user has to specify the folder for backup by selecting the Drive and directory on the hard drive of the COMPACT server.

The system will generate the backup of database on press of ‘Backup’ button. The name format of the file is ‘PAO’ followed by Date and Time e.g. CMP02328302052011112757.zip for the backup taken on 02-05-2011 at 11:27:57.

1.2 Change Server Name of Primary and Mirror Servers 1.2.1 Label Primary and Secondary (Mirror) Servers Label the Physical Server Boxes as PCOMP<PPPPPP> as the Primary Server and MCOMP<PPPPPP> as the Secondary (Mirror) Servers as shown in the diagram above. Ensure that both the servers are connected to the same Local Area Network of the PAO.

PCOMP 042709

(PRIMARY)

MCOMP 042709

(MIRROR)




1.2.2 Change Server Name of PRIMARY Server to PCOMP<PPPPPP> Right click on My Computer -> Properties -> Computer Name -> Change computer name.

Change computer name: to PCOMP<PPPPPP> where PPPPPP is the 6 digit PAO code assigned to each PAO by the O/o the CGA viz. PCOMP021709 (where 02709 is the PAO code) as shown above. Click <OK> to continue.

Click <OK>to continue.




Click on <Close> button.

Click on <Restart Now> button. The system will shut down and restart.




1.2.3 Change Server Name of MIRROR Server to MCOMP<PPPPPP> Right click on My Computer -> Properties -> Computer Name -> Change computer name

Change computer name: to MCOMP<PPPPPP> where PPPPPP is the 6 digit PAO code assigned to each PAO by the O/o the CGA viz. MCOMP042709 (where 042709 is the PAO code) as shown above. Click <OK> to continue.

Click <OK>to continue.



NIC-ACID- CPMS-INST 6 of 8 Version: 1.01 Release: 20110824

Click on <Close> button.

Click on <Restart Now> button. The system will shut down and restart.




1.3 Disabling Password Complexity Requirements The user needs to disable the “Password must meet complexity requirements” settings in the operating system Windows Server 2008 or above in both the Primary and Mirror Servers before Installation of the SQL Server 2008 R2. (Option available under Administrative Tool -> Local Security Policy -> Account Policy drill down -> Password Policy) 1.3.1 Primary Server

1.3.2 Mirror Server




1.4 Ensuring both Primary and Mirror Servers reside in the same workgroup It is required that both the servers (Primary and Mirror) along with all the COMPACT client systems reside in the same workgroup for COMPACT to work properly. If you note that the workgroup of either the Servers and/or the clients are different, follow the steps below to find the workgroup and change them if required so that all systems are part of the same workgroup.

Right click on the Computer icon and click on <Properties>

In the following screen as shown above, click on <Change Settings>




If the workgroup is different and need to be changed click on the <Change> button

Change workgroup to the common workgroup “WORKGROUP” (if that is the case) of all other servers and client systems as shown in the next screenshot.




Click <OK> button to continue.

Click <OK> button to continue.




Click on the <Close> button to continue.

The system will prompt you to Restart for the changes to apply. Click on the <Restart Now> button and wait till the system reboots. Your workgroup has been changed successfully.




1.5 Turning OFF windows Firewall on both Primary and Mirror Servers. Your windows firewall need to be turned OFF in both the Primary and Mirror Servers. After installation of the Antivirus software on the servers, the Windows Firewall need to be disabled as the Firewall is managed by the Antivirus application. To disable the Windows Firewall follow the steps as below:

Click on the <Control Panel> to continue.

Double Click on the <Windows Firewall> icon.




In the screen above click on <Change Settings> to bring up the Windows Firewall Settings Window.

Click the Radio button <off> and click on the <Apply> button to disable Windows Firewall.




2. SQL Server 2008 R2 Installation for both Primary Server and Mirror Server Once these pre-requisites in Step 1 mentioned above have been carried out the SQL Server 2008 Installation process can be started. In this Tutorial we shall be installing SQL Server 2008 R2 in both the Primary and Mirror Servers (both Instances). However, before starting the installation of SQL Server 2008, the .net Framework has to be installed.

2.1 Primary Server

2.1.1 Installation of the .net Framework For installing the .net Framework internet connection is required on the computer on which user is installing the SQL Server 2008. The user is expected to read through the license agreement and accept the license before he can proceed any further. After accepting the license agreement, click on install to proceed. If internet connection is not available, it can be installed from the distribution setup CD.

Please ensure internet connectivity to continue with the installation. It will connect to the internet and download required file for .net framework and get it installed on your system. Reboot your system. After restart you will get the following window automatically.




2.1.2 SQL Server 2008 R2 Installation on the Primary Server For fresh installation click on <Installation> link below the <Planning> link on the left hand Pane. On the right hand pane click on <New SQL installation or add features to an existing installation>.

Setup Support Rules checking starts to identify problems that might occur when you install SQL Server Setup Support Files as show in the next screenshot below.




Click on OK button.




The User will now be asked to enter the product key After entering the product key as mentioned in the media or on the License. After entering the product key click the <Next> Button.

Check the <I Accept the License terms> Box and click <Next> Button to continue.




Click on <Install> button. It will start installing the setup support files.

Click on the <Next> button it will start installing the setup rules.




By default the radio button for <SQL Server Feature Installation> will be enabled. Do not change it. Click on the <Next> Button to continue.

Check only the checkboxes as shown in figure above. Do not check the boxes against i) Analysis Services and ii) Reporting Services. Click on <Next> button to continue.




The installation rules are checked by the setup. Click on the <Next> button to continue.

Do not change default values. Click on the <Next> button to continue.




The Setup checks for the required disk space, Click <Next> button to continue.

In the Server configuration window, click on <Use the same account for all SQL Server services> button.




In account Name type “administrator” and type the password of the Windows 2008 Server “administrator password” of the system.

In the Screen above leave all the default values as it is. Click on <Next> button to continue.




Select <Mixed Mode (SQL Server authentication and Windows authentication)> radio button and enter a password for the SQL Server system administrator account. Please carefully note down the password you have assigned and store it as you would require it later. Click on <Add> button.

A new window “Select Users and Groups” will now open. Click on the <Advanced> Button.




Click on the <Find Now> Button.

Select the first entry Administrator (PCOMP<PPPPPP>) and click on the <OK> button.




Click on the <OK> button to continue.

The Administrator will appear in the window as shown in the screenshot above. Click on <Next> button to continue.




Leave the default values as it is. Click on the <Next> Button to continue.

Operation should complete without failures. Click on the <Next> button to continue.




The “Ready to Install” Window will appear. Click on the <Install> button to start installation.

The Installation process will start and the Installation progress bar will shown on the screen.




The Installation process will be indicated by a green check against all items with status as Success. Click on <Next> button to continue.

The SQL Server installation is completed successfully message appears. Click on the <Close> button. The SQL Server installation on the Primary Server is now complete.




2.1.3 Network Configuration Settings of SQL Server 2008 Go to Start > SQL Server 2008 > Configuration Tools > SQL Server Configuration Manager

a) Expand SQL Server 2008 Network Configuration. b) Click on “Protocol for MSSQLSERVER” and on the right pane “Shared Memory”, ”Named

Pipes” and ”TCP/IP” should be Enabled and “VIA” should be Disabled as shown in the screenshot above.

c) Click on “Protocol for SQLEXPRESS”, and the same process should be repeated for these protocols also i.e. all three “Shared Memory”, ”Named Pipes” and ”TCP/IP” should be Enabled and “VIA” should be Disabled as shown in the screenshot below.




d) Expand SQL Native Client Configuration. e) Click on “Client Protocols”. f) The same process should be repeated for these protocols also i.e. all three “Shared

Memory”, ”Named Pipes” and ”TCP/IP” should be Enabled and “VIA” should be Disabled as shown in the screenshot below.




2.2 Mirror Server

2.2.1 Installation of the .net Framework For installing the .net Framework internet connection is required on the computer on which user is installing the SQL Server 2008. The user is expected to read through the license agreement and accept the license before he can proceed any further. After accepting the license agreement, click on install to proceed. If internet connection is not available, it can be installed from the distribution setup CD.

Please ensure internet connectivity to continue with the installation. It will connect to the internet and download required file for .net framework and get it installed on your system. Reboot your system. After restart you will get the following window automatically.




2.2.2 SQL Server 2008 R2 Installation of First Instance (Mirror) Two instances of SQL Server 2008 R2 must be installed in the Mirror Server, one instance would be the default instance MSSQLServer and the other is the named instance i.e. WCOMPACT. For fresh installation click on <Installation> link below the <Planning> link on the left hand Pane. On the right hand pane click on <New installation or add features to an existing installation>.




The set up will start the installation process with ... Rules check in progress.

After the Rule check is completed, click on <OK> button to continue.




User will be asked to enter the product key which came with your SQL Server 2008 R2 License and Installation DVD. After entering the Product Key, click the <Next> Button.

Check the “I Accept the License Term” Box and click <Next> Button to continue.




Click on <Install> button. It will start installing the setup support file.

Click on the <Next> button and it will start installing the setup support rules.




Select Radio button <SQL Server Feature Installation> and Click on the <Next> Button to continue.

Check only the checkboxes as shown in figure above. Do not check i) Analysis Services and ii) Reporting Services. Click on <Next> button.




Click on the <Next> button to continue.

Leave default values as it is and Click on the <Next> button to continue.




The Setup Checks for the required disk space. Click <Next> button to continue.

Server Configuration window appears on the screen. Click on <Use the same account for all SQL Server services> button.




In account Name type “administrator” and use the password of the Windows Server 2008 administrator account “administrator password”.

Click on <Next> button to continue.




Select <Mixed Mode (SQL Server authentication and Windows authentication)> radio button and specify a SQL Server administrator Password of your choice and click on <Add> button. Please carefully note down and store the password as you will require it later.

Click on <Advanced> Button in the new window “Select Users or Groups”.




Click on <Find Now> Button.

Click on Administrator for MCOMP<PPPPPP> in the first row as shown above and click on the <OK> button to continue.




The MCOMP<PPPPPP> appears in the object names window. Click on the <OK> button to continue.

Click on the < Next> button to continue.




Click on the <Next> Button to continue.

The Installation Configuration Rules operation is completed without failures. Click on the <Next> button to continue.




The “Ready to Install” screen appears. Click on the <Install> button to start the installation process.

Installation is in progress as indicated by the Installation Progress Bar.




The Set-up process is completed. The Status is shown as Success against all the SQL features. Click on the <Next> button to continue.

The SQL Server Installation is completed successfully. Click on the <close> button.




2.2.3 Network Configuration Settings of SQL Server 2008 R2 Go to Start > SQL Server 2008 > Configuration Tools > SQL Server Configuration Manager

g) Expand SQL Server 2008 Network Configuration. h) Click on “Protocol for MSSQLSERVER” and on the right pane “Shared Memory”, ”Named


i) Click on “Protocol for SQLEXPRESS”, and the same process should be repeated for these protocols also i.e. all three “Shared Memory”, ”Named Pipes” and ”TCP/IP” should be Enabled and “VIA” should be Disabled as shown in the screenshot below.




j) Expand SQL Native Client Configuration. k) Click on “Client Protocols”. l) The same process should be repeated for these protocols also i.e. all three “Shared





2.2.4 SQL Server 2008 R2 Installation of Second Instance (Watcher) on the Mirror Server MCOMP<PPPPPP>

Insert the MS SQL Server 2008 R2 Media DVD into the drive and browse the contents. Double click on <Setup> icon on the right hand pane of the explorer window.




For 2nd instance installation click on <Installation> link below the <Planning> link on the left hand Pane. On the right hand pane click on <New installation or add features to an existing installation> to continue.

The set up will start the installation process with ... Rules check in progress.




After the Rule check is completed, click on <Install> button to continue.

After Setup Support Rules Check operation is completed. Click on the <Next>button to continue.




Select the radio button <New installation or add shared features> and click <Next> Button to continue.

Enter the Product Key as per your license available on the Installation media DVD and Click on <Install> button to continue.




Check on <I accept the license terms> box and Click on <Next> button to continue.

Click on radio button <SQL Server Feature Installation> and Click on the <Next> Button to continue.




Check only the checkboxes as shown in figure above. Do not include i) Analysis Services and ii) Reporting Services and Click on <Next> button to continue.





In the Instance Configuration window select the Radio button <Named Instance> and type the name of second instance as WCOMPACT. Click on the <Next> button.

The Setup checks for the required disk space on your drive. Click <Next> to continue.




Server configuration window, Click on <Use the same account for all SQL Server services> button to continue.

In account Name type in the Windows 2008 R2 Server Administrator login “administrator” and the appropriate password “administrator password”.





Select the radio button <Mixed Mode (SQL Server authentication and Windows authentication)> and specify a SQL Server System Administrator Password of your choice and click on <Add> button. Please carefully note down and store the password as you will require it later.




Click on <Advanced> Button in the new window “Select Users and Groups”.

Click on <Find Now> Button to continue.




Click on Administrator account as shown in the first row and then click on the <OK> button to continue.

The Administrator account of the Mirror Server is listed in the Object name frame. Click on the <OK> button to continue.




Click on the < Next> button to continue.

Click on <Next> Button to continue.




Click on <Next> button to continue.

Setup is now ready to begin the installation process. Click on <Install> button to continue.




The Installation process is started and the progress is shown by the progress bar.

The SQL Server 2008 R2 second Instance installation is completed successfully. Click on the <close> button.




2.2.5 Network Configuration Settings of SQL Server 2008 R2 Go to Start > SQL Server 2008 > Configuration Tools > SQL Server Configuration Manager

m) Expand SQL Server 2008 Network Configuration. n) Click on “Protocol for MSSQLSERVER” and on the right pane “Shared Memory”, ”Named


o) Click on “Protocol for SQLEXPRESS”, and the same process should be repeated for these protocols also i.e. all three “Shared Memory”, ”Named Pipes” and ”TCP/IP” should be Enabled and “VIA” should be Disabled as shown in the screenshot below.




p) Expand SQL Native Client Configuration. q) Click on “Client Protocols”. r) The same process should be repeated for these protocols also i.e. all three “Shared





3. Restoration of COMPACT database backup taken in Step 1 in the Primary Server and COMPACT e-payment Upgrade Ver.6.01

3.1 Restoration of the COMPACT database backup

Run the PAO2k-RestoreVer6-ZipBackUp Utility to restore the COMPACT database the backup of which was taken at the very beginning (as mentioned in Step 1).

Ensure that no users are working on the COMPACT application and click <Enter> Key to continue.




The Restoration Utility detects PCOMPACT042709 as the COMPACT Server. Click on <Yes> button to continue.

Enter the SQL Server Administrator password which you have assigned in Step 2.1.2 during SQL Server Installation (Page 23 of 2.1.2) correctly.




Browse to the folder where the COMPACT backup (as in Step 1) has been copied and select the backup to be restored as shown in the screenshot below.

Click on the <Restore Database> button to restore the COMPACT database.




On successful restoration the message is prompted. Click <OK> to close the restoration utility. 3.2 COMPACT Ver.6.01 Upgrade for e-Payments The COMPACT Ver.6.01 Upgrade utility is available to all users on the e-payment Installation DVD.

Click on the Utility to start the upgrade.




The self-extracting archive runs and as shown by the progress bar above and prompts the user to proceed with the upgradation.

Click on the <Yes> button to continue with the upgradation.




In the Upgrade window, Leave the default values as it is and click the <Upgrade> button to start the upgradation process.

The system prompts the user to proceed with the upgradation. Click on the <Yes> button to continue.




The Upgrade process starts with the backing up of the existing database as indicated in the Red progress box.

The Upgrade process continues with the Completion of Backup of COMPACT database as shown in the screenshot above.




The Upgrade process continues with the preparation and execution of Ver.6.01 scripts for effecting necessary database changes.

After successful execution of Ver. 6.01 scripts, the process continues with the locking of the SQL Server database.




The upgrade now continues with the installation of drivers of e-payment Keys as shown in the Red box and the progress indicated by the Blue bar.

After the successful completion of the Upgrade the user is prompted. Click OK to complete and close the Upgradation process.




4. COMPACT Database Mirroring Once the COMPACT database is restored in the Primary Server and upgraded to Ver.6.01 as described in Step 3, the setup of database mirroring between the Primary and Mirror Servers can be started. On the Primary Server, run the Mirroring Setup Utility. The following Screen appears:

Click on <Mirroring (Fresh Setup)> to start mirroring.

The system prompts to enter the name of the Secondary (Mirror) Server. Enter MCOMPPPPPP where PPPPPP is the PAO code as the Mirror Server name. In this




example we have typed MCOMP042709. After typing the Mirror Server name Click <OK> to continue.

The utility now prompts the user for the workgroup name. Type in the workgroup name of the servers (as carried out in Step 1.4) and click on <OK> to continue.

The utility now prompts for the SQL Server Administrator password of the Secondary (Mirror) Server default instance as provided by you (Refer Page 40 of Step 2.2.2) during the SQL Server installation of the Mirror Server.




The utility now prompts for the SQL Server Administrator password of the Secondary (Mirror) Server second instance (Watcher - WCOMPACT) as provided by you (Refer Page 56 of Step 2.2.4) during the SQL Server installation of the Mirror Server second instance.

The user is now prompted to enter the Secondary (Mirror) Server Administrator Username which is “administrator” and click <OK> button to continue.




Enter the Secondary (Mirror) Server Administrator password and click <OK> button to continue.

The Mirroring process will start and will be indicated by the progress bar as shown in the screenshot above.



NIC-ACID- CPMS-INST 77 of Version: 1.01 Release: 20110824

On successful setup of the mirroring, the user will be prompted as “Database is setup for mirroring successfully”. Click <OK> to complete the mirroring process. Note: Once the Mirroring is completed, always ensure that the Primary Server is started first and booted before the Mirror Server is started at the beginning of every day.

of the compact server. - controller general of accounts · 2.2.2 sql server 2008 r2 installation of...

Documents