octave one stage plot v14triangleagency.com/wp-content/uploads/2018/03/octave-one-stage... · a....
TRANSCRIPT
a. Midas Venice 320 Mixing Console
c. Korg KP3+ Kaoss Pad Dynamic Effects Sampler
e. Roland VP-9000 VariPhrase Processor (max ram/modified)
Behringer BDI21 V-Tone Bass Driver/DI’s
k. Roger Linn Design AdrenaLinn II Effects
l. Alesis NanoVerb 2 Digital Effects
n. FMR Audio RNLA 7239 Leveling Amp
p. Akai MPC1000Sequencer/Sampler (max ram/JJ OS1)
c. d. d. e.
f.
p.
m. FMR RNC 1773 Compressor Unit
k. l.
n.
m.
Lenny Burden Lawrence Burden
*AC 6 socket power strip *AC 6 socket power strip*AC 6 socket power strip *AC 6 socket power strip *AC 6 socket power strip *AC 6 socket power strip
*One (1) sturdy TABLE 4m x 92m x 110cm in height
*Two (2) XLR cables female connections
*Two (2) XLR cables from MASTER Bto stage monitoring system
*One (1) Stage Area of 4m x 1.5m in size (with an Elevation of 46cm to 61cm [18” to 24”] with more required if crowd size dictates better view of stage).
Stage must be free of gaps and/or unevenness greater than .32cm [1/8”]
*STAGE AREA 4m x .1.5m - *denotes equipment to be supplied by PROMOTER/VENUE
*Stage monitorLEFT MIX
o.
Octave One live v14Stage Plot (set-up)Technical Contact: Katty Lange email: [email protected]
Except for those listed below to be supplied by promoter/venue, Octave One will provide all other leads.
*Stage monitorRIGHT MX
g.
h. Eventide Space
h.
*PROMOTER suppliedKeyboard stand
*PROMOTER suppliedKeyboard stand
*PROMOTER suppliedKeyboard stand
*PROMOTER suppliedMIDI Keyboards Controller must havea 5-pin "DIN" MIDI OUT port on it.
and *POWER SUPPLIES
49 F
ULL
SIZE
Key
s
Shruthi 1 Analog/digitalSynthesizercustom build
*SUB-WOOFER
d. Two (2) Korg MX Music Production Station - Modified
Electric Cooling fanElectric Cooling fan
*Three (3) German Schuko6 socket strips
*PROMOTER suppliedKeyboard stand
*PROMOTER suppliedKeyboard stand
*PROMOTER suppliedKeyboard stand
*PROMOTER supplied
*Three(3) North American 6 Socket Strips
230v Country
*PROMOTER supplied
120v Country
--OR--
Promoter supplied:MIDAS VENICE 320(NOT THE F32 or U32!!)
mixing desk with CASE
Moog MinitaurAnalog BassSynthesizer-
*PROMOTER suppliedMIDAS VENICE 320
Mixing Desk in 100% Working condition
Prom
oter
sup
plie
d: M
idi C
ontr
olle
r
What OCTAVE ONE brings (Artist will supply this equipment):
g. Nord Micro Modular
Synthesizer
MeeBlip SEHackableDigital Synthesizer
MFB-522Analog DrumComputer
DSI TetraAnalog Synth
Ketron SD4Sound Module
FaderfoxSC4
f. DSI Mopho Monophonic Analog Synth
AiraScooper
AiraTB-03
MIDAS VENICE 320 (NOT THE F32 or U32!!!)MUST BE in Like New 100% Working condition
with two (2) mixer lamps
*One (1) STAGE AREA of 4m x 1.5m in size (with an Elevation of 46cm to 61cm [18” to 24”]
with more required if crowd size dictates better view of stage). Stage must be free of gaps and/or
unevenness greater than .32cm [1/8”]
Octave One live v14BACKLINE diagram
Technical Contact: Katty Lange(Manager) email: [email protected]
MIDI Keyboard Controller must have
a 5-pin "DIN" MIDI OUT port on it.
and *POWER SUPPLY
ONE (1) MIDI KEYBOARD CONTROLLER49 FULL SIZE Keys (no mini keys)
The following are only examples of controllers.Any model like theses will do:
• M-‐Audio Axiom 49 49-‐Key MIDI Keyboard Controller• M-‐Audio Oxygen 49-‐MIDI Controller (5-‐pin "DIN" midi out)
• Akai Professional MPK49 Keyboard MIDI Controller
*Three (3) German Schuko6 socket strips
--OR--
KEYBOARD STAND w/ tiltable hands
2x HIGH QUALITY, HIGH OUTPUT SIDEFILL MONITORS W/AMPS
**MUST BE SIDEFILLS - NO WEDGES**
230V COUNTRYa.Two (2) independent 20-‐amp 230-‐volt
household circuits located ON STAGE,These circuits are exclusive to the performer and
no allowance for electrical service to other
120V COUNTRYa.Two (2) independent 20-‐amp 120-‐volt
household circuits located ON STAGE,These circuits are exclusive to the performer and
no allowance for electrical service to other
2 ELECTRIC FANS
SUBWOOFER
MANDATORY STAGE Equipment supplied by Promoter/Venue for Artist use only
*Three (3) North American 6 Socket Strips
One (1) Stage / Drum Riser 10ft x 10ft (305cm x 305cm) 1.5-2ft (61cm) high
*One (1) sturdy TABLE 4m x 92cm x 110cm in height [12ft x 3ft x 3.6ft in height]
-Optional
d.
f. k. l.
n.
m.
Lenny Burden Lawrence Burden
o. g.
h.
Electric Cooling fanElectric Cooling fan
One (1) Stage / Drum Riser 10ft x 10ft (305cm x 305cm) 1.5-2ft (61cm) high
FRONT VIEW
TOP VIEW
Octave One live v14Large Venue/FestivalStage Plot 2 (set-up)Stage Riser Technical Contact: Katty Lange email: [email protected]
Festivals when a Stage Riser is in use
TABLE MUST BE SECURELY STRAPPED TO RISER! RISER AND TABLE MUST BE SKIRTTED WITH BLACK FABRIC.
RISER MAY BE EQUIPPED WITH LOCKABLE WHEELS.
*One (1) sturdy TABLE 3m x 92cm x 110cm in height
[10ft x 3ft x 3.6ft in height]