oasis 2900 retractable insect screen: detailing guide

Oasis 2900 Retractable Insect Screen: Detailing Guide

Detailing Oasis 2900 Retractable Insect Screens and Patio Shades into NewConstruction Projects

We receive a lot of requests for help with new construction projects. Site conditions varydramaticallly on each project, and solutionsfor each project require careful planning.

WE ARE HERE TO HELP!

The attached pages summarize some basic installation details and highlight access considerations. Insolroll is available to consult on any specific proposed built-in details you may be working on. Send us drawings and photos to provide as much information as possible.

Built-in Oasis 2900 with recessedsidetrack in masonry columns.

©2017 Insolroll Window Shading Systems, Inc.

ALL OASIS 2900 SHADES ARE MOTORIZEDPlease determine the right motor and control solution for your project and download the appropriate pre-wire information.

SITE CONDITIONS

Design all site-built pockets and valance designs with easy access to install and service. Review the attached pages for typical pocket and access solutions. Please note that detailing shades in site-built pockets requires special care and a coordinated effort between several trades. Additional detailing is required when recessing side channels.

FLOOR SLOPE

Insolroll shades have a 1” flexible seal strip on bottom of shade. Openings with more than 3/4” variance may require other floor leveling techniques (by others).

SPECIAL NOTES on any pocket application:

• Sell U-Track for all Oasis 2900 recessed track applications (preserves space/ prevents damage)• Note that outside mounting bracket aligns with outside of side tracks- requires pocket be wider (at least 4”)

than the inside of column width.• To fit shade assembly into pocket when tracks are recessed requires pocket be wider and/or taller than

normal• Highly Recommended– Detail Pocket so that full width access (bracket to bracket) is available to shade

from front or bottom. It is required that this access closure be easily removable for shade maintenance.

OASIS 2900 RETRACTABLE INSECT SCREEN

Built-in Shade Applications for New Construction

Mount U-Track

before masonry

Finish masonry to U-Track

Oasis 2900 Side Track

installed after masonry1

¾”

1 7/8"2 1/8"

How to detail Oasis 2900 into structure.Installation details vary dramatically from project to project. Applications shown can give you ideas to incorporate into

your next project. Pay attention to shade access, clear opening height, side track mount, and electrical hook-up.

Oasis 2900 shades can be built

into soffit with aluminum pocket · 5" x 5 ½” aluminum shade pocket

with access flap.

· Shades require access from the

bottom.

· Trim can be attached to pocket or

access flap if desired.

· Shade hangs below aluminum

pocket or head box into side

tracks 3 ¾” when retracted.

5- sided

extruded

aluminum

headbox

Hem bar

1" hem bar seal

strip

5 1

/2"

Side track with

ShyZip zipper insert

Pile top seal

5" headbox integrated with

structure. · 5" x 5 ½” aluminum headbox can

be integrated into architecture for

easy access to shade by

removing front/bottom cover. Wall

or ceiling mount available.

· Side track can be pre-drilled for

face mount or side mount as

shown.

5"

Side tracks can be built into

columns with U- track for

recessed appearance· U-Track should be aligned with

shade coming off roll for smooth

operation.

· 1 15/16" x 2 1/8" U-track should

be installed prior to masonry.

· Track should be installed after

masonry is complete to keep Shy-

Zip retention system clean.

5 1

/2"

3 1/2"

removable

access flap

5" x 5 ½”

extruded

aluminum

shade pocket

5"

Hem bar

1" hem bar seal

strip

Site-built pocket with recessed

side tracks· Shade access becomes tricky with

the shade being wider than the

inside column width. Larger

pocket depth required to enable

shade installation.

· Shade access can be provided by

removable access panel on

bottom or front of pocket.

He

m b

ar

ha

ng

s

3 ¾

” in

to s

ide

tra

ck

wh

en

re

tra

cte

d

Pocket front

face

Used as

hanger

6 ½”

9"

1"

3 1/2"

removable

access flap

He

m b

ar

ha

ng

s

3 ¾

” in

to s

ide

tra

ck

wh

en

re

tra

cte

d

Hem bar

Hem bar seal strip

Head box

Side

trac

k

(Cross section view)

OASIS® 2900 RETRACTABLE INSECT SCREEN

Pocket Detail with Removable Front Panel

637 S. Pierce Ave., Louisville, CO 80027 www.insolroll.com 800-447-5534scale

3" = 1'-0"

5/17/17

1 3

/4"

1 7/8"

Notes:

1. Oasis® 2900 Retractable Insect Screens are available motorized only.

2. Shades hang below aluminum pocket or head box into side tracks 3 ¾” when retracted.

For applications requiring hem bar above clear opening, design pocket depth at least 9" deep.

3. Insolroll uses the time proven SHY Zip technology to seal the edges of the shade. SHY Zip is a product of

SHY Co. LTD of Japan and distributed exclusively in North America by its authorized sub-licensees.

Side Track drilled for

outside face mount.

(fastener by others, plug

button provided)


side mount.

(3 1/2" pan head

screw provided)

Plug Button

Zipper Insert

Zipper

5 1

/2"

Removable front

panel and bottom

access flap

5" x 5 ½”

extruded

aluminum shade

pocket

5"

3 ¾

”

Hem bar

1" hem bar seal strip

5 1

/2"

Column or wall

Pile top seal

Side track with


Oasis 2900

Retractable Insect

Screen

OASIS® 2900 RETRACTABLE INSECT SCREEN

Pocket Detail with Exposed Side Track


3" = 1'-0"

5/17/17

1 3

/4"

1 7/8"

Notes:

1. Oasis® 2900 Retractable Insect Screens are available motorized only.

2. Shades hang below aluminum pocket or head box into side tracks 3 ¾” when retracted.

For applications requiring hem bar above clear opening, design pocket depth at least 9" deep.

3. Side tracks need to be removed to remove shade and roller assembly.

4. Insolroll uses the time proven SHY Zip technology to seal the edges of the shade. SHY Zip is a product of

SHY Co. LTD of Japan and distributed exclusively in North America by its authorized sub-licensees.


outside face mount.

(fastener by others, plug

button provided)


side mount.

(3 1/2" pan head

screw provided)

Plug Button

Zipper Insert

Zipper

5 1

/2"

3 1/2" removable

access flap

5" x 5 ½”

extruded

aluminum shade

pocket

5"

3 ¾

”

Hem bar

1" hem bar seal strip

5 1

/2"

Column or wall

Pile top seal

Side track with


Oasis 2900

Retractable Insect

Screen

OASIS 2900 RETRACTABLE INSECT SCREENSite-Built Pocket and Recessed Side Track into Column


3" = 1'-0"REV 5/17/17

He

m b

ar

ha

ng

s

3 ¾

” in

to s

ide

tra

ck

wh

en

re

tra

cte

d

Pocket front face

Used as hanger

Side View

Recessed Column View

Pocket Top View

Front View

Hem bar

1" Seal strip

Oasis 2900

Shade / Insect

Screen

U-Track

6 ½”

2"

9"

Side Track

1 7/8" 2 1/8"

1 ¾

”

1 1

5/1

6"

Side Track

1"

U-Track

2'

6 ½

”

3 1/2" removable

access flap

Oasis 2900

Shade / Insect Screen

Extend pocket

2" wider than

shade to allow

for installation

Shade

mounting

bracket

Column or wall

4 ½” minimum

access beyond

side track for

shade installation

Side Track Detail

Notes:

1. Pocket conditions vary on every project. Specific

drawings were created to show key dimensions required to

maintain clear opening when retracted and access standards

for installation and service.

2. Pocket with recessed side track must be 2" wider than

outside side track width on each side.

3. Space for electrical connection may require additional

pocket depth if J-box is needed.

U-Track

oasis 2900 retractable insect screen: detailing guide

Documents