numl presentation 1
DESCRIPTION
Ali HaiderTRANSCRIPT
Engineering Drawing Engineering Drawing
By By
Dr. M Shahid KhalilDr. M Shahid KhalilVisiting FacultyVisiting Faculty
Chairman & Professor, UET Chairman & Professor, UET TaxilaTaxila
Sequence of LectureSequence of Lecture
Introduction Aim of the subject Objective Course Contents Evaluation and Course Weight-age Presentation and Report Submission Questions and Answer
About About My SelfMy Self
Educational BackgroundEducational Background Doctor Of Philosophy (Ph.D) in Mechanical Engineering Institution : University of Sheffield, Sheffield, U.K. Project Title : Procedure For The Indirect Measurement Of Contours Of Interface Pressure
in Contact Phenomena. Field : Computer Aided Design and Computer Aided Engineering (CAD/CAE)
M. Sc. CAD/CAM Course Institution : University of Manchester Institute of S & Technology, (UMIST), UK Subject : CAD Principles, Simulation, Advanced Manufacturing, Robotics,
Computer Aided Machining, Adv Manf Systems, CAD/CAM etc.
B.Sc. (Mech) Engineering Institution : University of Engineering and Technology, Lahore. Project title : An Automation of the Strip Rolling Mill. PG Diploma in Human Resource Management Institution : National University of Sciences and Technology, Rawalpindi Project Title : To Develop Human Resource Information System of NTC,
Islamabad
Educational BackgroundEducational Background PG Diploma in Software Quality Management Institution : National University of Sciences and Technology, Rawalpindi Project Title : To Develop an online Database Information System of
Public Sector Hospital, Rawalpindi
Other Educational Qualifications Lead Auditor ISO 14001 E. A. R. A., U. K. Lead Auditor ISO 9000 I.R.C.A., U. K. Lead Auditor Quality Management in Laboratories for ISO 17025 Course on Social Accountability SA 8000 Course on Occupational Health and Safety 18001 Capability Maturity Model (CMM) for the Software Houses Quality Management System in Healthcare Internal Quality Auditing for QMS Japanese Methodologies at Workplace Improvement Total Quality Management in the Pakistani Environment Six Sigma for Quality Improvement “Accreditation and Certification used as International Tool for Global
Trade” at National University of Sciences and Technology, Rawalpindi.
Professional Experiences Professional Experiences M/S Saif Nadeem Kawasaki Motors Ltd. Haripur Worked as Shop In charge in the following shops :- Welding Shop : Production of 50 Motor Cycles Frame daily Fabrication Shop : To Fabricate Gates, Window pans, Railing, etc Electroplating Shop : Polish of Mud Guard, Sprockets, Wheel Rim Machine Shop : Electrical Discharge, Wire Cutting, CNC, Injection Molding Machine Assembly Shop : Assembly of Motorcycles for production. Quality Assurance : Motorcycles before Dispatch Heavy Mechanical Complex, Taxila Shop In-charge on the Machine Shop Floor Managed Production of Engineering Component for the Manufacturing
of Sugar Plant, Cement Plant, Road Roller, Crane, Boiler, Belt Conveyor etc. from machining operations like Lathe, Shaper, Milling, Drilling, Planer, Slotting, Gear Hobbing, Grinding, Honing etc.
Professional ExperiencesProfessional Experiences Worked on AutoCAD Version 01 which was DOS based in 1985 at HMC Taxila.
Taught Engineering Drawing on AutoCAD Versions 10, 11, 12, 13 and 14 to Draftsmen and Engineers for the Design, Development and Manufacturing of Mechanical Equipment related to Cement Plant, Sugar Plant, Road Roller etc..
Taught Third Party AutoCAD’s Software like PRO FLOW, PRO ISO, PRO PIPE, PRO PLANT etc to Draftsmen and Engineers for the production of Plant Drawings, Piping Layout, Instrumentation Diagrams of Plant etc.
Inspection of Machined Components using Non Destructive Testing (NDT).
Archiving of 40 years old Engineering Drawing using Scanner. CAD Image software used to convert raster image to vector image.
Archiving of 40 years old Engineering Drawings of HMC in the form of Microfilming System.
Professional ExperiencesProfessional Experiences Developed Computer Aided Design Software in LISP Programming Language
for design and drafting of Engineering equipments of Overhead Crane etc.
Scanned drawings for the purpose of Archiving using Scanner and then convert raster to vector images for Acad12 using GTX Raster Cad Image Software.
Deputy Technological Adviser, MoST, Govt of Pakistan Responsible for administration, coordination, implementation, monitoring and
evaluation of more than 35 R & D Projects, PC-I, Working Papers etc from all the sister organizations of MoST, Private Sectors and individuals.
Project of Grant-in-Aid for Contractual Research. Under this program, I was doing appraisal of R&D Projects of innovative nature which could be commercialized e.g indigenously development of Shuttle Less Loom, Pivot Irrigation System, Tissue Culture of Potatoes, Manufacturing of Solar equipment
Consultancy Program for Industrial & Technology Development (CPITD). The purpose of this program was to help Small and Medium Enterprises (SMEs) to improve industrial productivity and product quality to obtain ISO-9000 Certification. Gave grant of Rs 200,000 to the SMEs to cover the cost of Certification.
Professional ExperiencesProfessional Experiences Associate Professor, National University of Sciences and Technology,
Rawalpindi
Worked as In charge Quality Management Representative for the implementation of ISO 9000 at HQ NUST, Rawalpindi and other Constituent Colleges of NUST in Pakistan.
Worked for the promotion of University-Industrial Linkages through Consultancy Services for ISO 9000. Provided ISO9000 Certification in more than 20 various Sectored Industries like Fauji Cereals, Fauji Metals, Heavy Mechanical Complex, Chemical, KNK Software House, Shezan, Creative Electronic Technology etc. Educational Institutions like EME College, Aeronautical College Risalpur, NFC Multan, NFC Faisalabad, Kakul Academy, Abottabad and PNS Hafeez Hospital, Islamabad.
Conducted more than 50 seminars, workshops, Diploma Programs in the various cities across Pakistan on Quality issues and WTO matters.
Conducted Quality Audit of more than 50 sectors industries on behalf of
the Multinational Certification Bodies in Pakistan. Generated revenue to the tune of Rs 20.0 million within three years which
results in the creation of new department as NUST Consulting, Islamabad.
Professional ExperiencesProfessional Experiences Professor, Mechanical Engineering Dept., University of
Engineering and Technology, Taxila
1. Teaching Machine Design, AutoCAD 2000, Assembly of Engineering Drawing, Engineering Management
2. In charge of CAD Labs in the Department of Mechanical Engineering
3. Establishment of the Industrial Manufacturing Lab4. Teaching Total Quality Management and HRM to MSc Level5. Teaching MIS and Project Management to MSc level6. Member of the Interview Board of Pakistan Steel Mills7. Member of the Interview Board of Pakistan Ordinance Factories 8. Refurbishment of Mechanical Engineering Labs9. Secretary of a committee to purchase advanced equipment etc 10. In charge of Students Internship Program at UET, Taxila11. Focal person for the implementation of QMS ISO9000 at UET,
Taxila
Professional ExperiencesProfessional Experiences
Quality Auditor on behalf of Certification Bodies 1. Moody International Certification Body, UK.2. Benchmark Certification, Australia3. DQS German Registrar, Germany4. TUV-Cert, Germany5. SWISSO International, Switzerland6. Q.E.C United Kingdom.7. AFAQ, France
Publications Publications Fourty Publications in the National and
International Conferences like in USA, UK, France, Korea, Denmark etc.
Thirty Publications in the National and International Refereed Journals
Book WrittenUnder process on the subject of Engineering
Drawing for students of Engineering Fields
List Of Taught CoursesList Of Taught Courses Human Resource Management Quality Management System Artificial Intelligence Management Information System Project Management Workshop Technology Production Technology Total Quality Management Computer Aided Designing / Computer Aided Engineering Industrial Engineering Machine Design Engineering Drawing AutoCAD
Role as a SupervisorRole as a Supervisor
Approved Ph D. Supervisor , Higher Education Commission (HEC), Islamabad.
Supervising Seven Ph. D. students at UET, Taxila
Supervising M.Sc. students at UET, Taxila Supervising B.Sc. Students at UET, Taxila
Professional ExperiencesProfessional Experiences
International Registrar for Certificated Auditor (IRCA), United Kingdom.
Associate of the Institute of Quality Assurance, United Kingdom
Pakistan Engineering Council (PEC).Institution Of Engineers Pakistan (IEP).Pakistan Professional Associations (PPA)
International, United Kingdom
Visiting Faculty MemberVisiting Faculty Member E & ME College, NUST Wah University of Engineering, Wah Cantt Hamdard University, Islamabad NFC- Bahuddin Zakaria University, Multan NFC- University, Faisalabad University of Engineering and Technology, Peshawar Air University, Islamabad Bharia University, Islamabad Imperial Institute of Technology, Islamabad Fatima Jinnah Women University, Rawalpindi Army Public College of Management Sciences
(APCOM), Rawalpindi Allama Iqbal Open University, Islamabad PIMSAT, Islamabad.
AIM
To Teach Basic Engineering Drawing / Computer Aided Engineering to the Engineering Students
Objective
To impart Quality Education to future engineer about the basics of the Engineering Drawing and its practical application.
Unfolding Unfolding
of Class of Class Syllabus Syllabus
Part-I
Course Topics
Part-II
Evaluation and Course Weight age
Part-III
Presentation and Report Submission
Part -IPart -I
Course Contents : Course Contents :
Importance of Engineering Drawing over the Model Introduction of Conventional Drawing Drawing constructions Drawing Instruments Fixation of drawing on the drawing board. Graphics and its application Drawing practices of at least 10 exercises on the drawing
board like V Block, Bushed Bearing, Shaft, etc. etc. Orientation of the AutoCAD Learning of Coordinating Points Learning of Various AutoCAD commands Preparation of AutoCAD drawings
Course Contents : Course Contents :
Opening of the CAD file and how to run the AutoCAD software for drawing
Line , Circle , Fillet , Editing a Drawing, Erase, Break, Cancel
Move, Copy, Save a drawing, Dimensioning Layers Preparation of sketches and technical design Etc.
ACAD COMMANDS THE LINE COMMAND THE CONSTRUCTION LINE COMMAND THE RAY COMMAND THE POLYLINE COMMAND THE RECTANGLE COMMAND THE POLYGON COMMAND THE DONUT COMMAND THE CIRCLE COMMAND THE ARC COMMAND THE ELLIPSE COMMAND THE SPLINE COMMAND THE POINT COMMAND THE MULTILINE COMMAND THE MULTILINE STYLE COMMAND THE ERASE COMMAND THE COPY COMMAND THE MIRROR COMMAND THE OFFSET COMMAND THE ARRAY COMMAND THE MOVE COMMAND THE ROTATE COMMAND THE SCALE COMMAND
Reference BooksReference BooksFirst Year Engineering Drawing
by A. C. ParkinsonBasics of the Engineering Drawing
by Dr Ashraf, Zahid, Shahid Engineering Drawing
by N D BhattFundamentals of Engineering Drawing
by Luzadder, DuffMastering AutoCAD 2000
by George Omura
Part -IIPart -II
Evaluation and Course Evaluation and Course
Weight age Weight age
Basics of Engineering Drawing and CAD September 2013 to January 2014
Marks Distribution in the Examination
MidMid 20 20
Quizzes/Assignments/Presentation 40 Final Exam 40
Grand Total 100
Part -IIIPart -III
Report Submission and Report Submission and PresentationPresentation
Each student has to Manufacture a Model as a Mini Project to learn surveying, coordination, purchasing, manufacturing, dimensioning on the model, etc.
Students have to submit Model and sketch three views of that Model as a term project
My Contacts :My Contacts : Telephone (off) : (051) 9047 666
Telephone (Mob): 0300-5060 377,
Email Address : drmshahidk @ gmail.com
Concluding Concluding CommentsComments
CommentsComments
Students will learn the skills of Basic Engineering Drawing using Drawing Board and Drawing Instruments to draw the 2-D drawing. Then they have to computerize the same drawing in the AutoCAD. They will also learn about the subject from my own Industrial and Mechanical Engineering background.