nn-20500-027p3 (parameters dictionary - inode parameters) 09.05 preliminary september 2008

NN-20500-027

Wireless Service Provider Solutions

W-CDMAAlcatel-Lucent 9300 W-CDMA Product Family -Parameter Reference Guide - I-Node ParametersNN-20500-027 09.05 Preliminary September 2008

Wireless Service Provider Solutions

W-CDMAAlcatel-Lucent 9300 W-CDMA Product Family - ParameterReference Guide - I-Node Parameters

Document number: NN-20500-027Document issue: 09.05Document status: PreliminaryProduct release: OAM06.0Date: September 2008

Copyright © 2001-2008 Alcatel-Lucent, All Rights Reserved

ALCATEL-LUCENT CONFIDENTIAL

UNCONTROLLED COPY: The master of this document is stored on an electronic database and is "writeprotected"; it may be altered only by authorized persons. While copies may be printed, it is notrecommended. Viewing of the master electronically ensures access to the current issue. Any hardcopiestaken must be regarded as uncontrolled copies.

ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property ofAlcatel-Lucent. Except as expressly authorized in writing by Alcatel-Lucent, the holder shall keep allinformation contained herein confidential, shall disclose the information only to its employees with a needto know, and shall protect the information from disclosure and dissemination to third parties. Except asexpressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the informationcontained herein. If you have received this document in error, please notify the sender and destroy itimmediately.

Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marksof Alcatel-Lucent, Alcatel and Lucent Technologies.

All other trademarks are the property of their owners.

PUBLICATION HISTORYSYSTEM RELEASE OAM06.0

September 2008

Issue 09.05/EN Preliminary

Update after internal review

July 2008



April 2008

Issue 09.03/EN Draft

Update for Pre-DR4

April 2008



January 2008


Update/Creation for V6.0 April-08 portfolio content.

SYSTEM RELEASE: OAM05.2

November 2007

Issue 08.03/EN Standard

Update for DR5.

September 2007


Update after internal review.

August 2007


Publication history i

Copyright © 2001-2008 Alcatel-Lucent Alcatel-Lucent 9300 W-CDMA Product Family - ParameterReference Guide - I-Node Parameters

Update for OAM05.2

SYSTEM RELEASE: UMTS 5.1

July 2007

Issue 07.03/EN Standard

Update for UA 5.0 / OAM 5.1 Channel Readiness.

February 2007


Update after internal review.

November 2006


Update for OAM 5.1/UA 5.0 [UMTS 5.1]

The Publication History information for the outdated releaseshas been deleted.Document creation date: May 2004

Publication history ii

NN-20500-027 09.05 Preliminary September 2008 Copyright © 2001-2008 Alcatel-Lucent

1 About this publication................................................................................................................................................... 1

2 Object/Parameter description....................................................................................................................................... 4

3 Aal2If (Aal2If).................................................................................................................................................................. 9

4 Aal2IfAlcapBearer (Alcap)........................................................................................................................................... 18

5 Aal2IfAlcapConn (AlcapConn).................................................................................................................................... 19

6 Aal2IfAlcapSaalUni (SaalUni)......................................................................................................................................21

7 Aal2IfDstPvc (DstPvc)..................................................................................................................................................23

8 Aal2IfNailedupAccessPoint (Nap)...............................................................................................................................24

9 Aal2IfSpvcTerminationPoint (Stp).............................................................................................................................. 26

10 Aal2IfSrcPvc (SrcPvc)................................................................................................................................................28

11 Aal2IfTrafficManagement (Tm)..................................................................................................................................30

12 Aal2Link (Aal2Lk)....................................................................................................................................................... 37

13 ApmOm (Om)..............................................................................................................................................................39

14 ApmSts (Sts)...............................................................................................................................................................42

15 ApmVc4 (Vc4)............................................................................................................................................................. 47

16 ArcApcOverride (Ov)..................................................................................................................................................52

17 ArcAtlantaPortController (Apc).................................................................................................................................57

18 ArcOverride (Ov)........................................................................................................................................................ 59

19 AtmAddress (Addr).................................................................................................................................................... 66

20 AtmAddressPnniInfo (PnniInfo)................................................................................................................................68

21 AtmCell (Cell)..............................................................................................................................................................70

22 AtmConLoop (Loop).................................................................................................................................................. 76

23 AtmConTest (Test)..................................................................................................................................................... 77

24 AtmConfiguredNode (CfgNode)................................................................................................................................82

25 AtmConnectionAdministrator (CA).......................................................................................................................... 93

26 AtmConnectionMapping (ConnMap)...................................................................................................................... 101

27 AtmConnectionMappingOverride (Ov)...................................................................................................................102

28 AtmConstantBitRate (Cbr).......................................................................................................................................106

29 AtmControlChannelVcd (Vcd).................................................................................................................................125

30 AtmDstPvc (Dst).......................................................................................................................................................133

31 AtmDstPvcConfig (Config)......................................................................................................................................134

32 AtmIfEmissionPriority (Ep)......................................................................................................................................136

33 AtmIlmi (Ilmi).............................................................................................................................................................141

34 AtmInterface (AtmIf).................................................................................................................................................143

35 AtmLinkTxUtilization (Ltu).......................................................................................................................................155

Table of contents iii


36 AtmNailedUpAccounting (NAcct)........................................................................................................................... 157

37 AtmNailedUpEndPoint (Nep)...................................................................................................................................160

38 AtmNailedUpRelayPoint (Nrp).................................................................................................................................161

39 AtmNonRealTimeVariableBitRate (NrtVbr)............................................................................................................ 165

40 AtmPnni (Pnni)......................................................................................................................................................... 184

41 AtmPnniCache (Cache)............................................................................................................................................198

42 AtmPnniInterface (Pnni).......................................................................................................................................... 201

43 AtmPnniLoadBalancing (Lb)...................................................................................................................................208

44 AtmPnniNodeName (Node)..................................................................................................................................... 212

45 AtmPnniPeerGroupLeader (Pgl)............................................................................................................................. 214

46 AtmRcc (Rcc)............................................................................................................................................................217

47 AtmRealTimeVariableBitRate (RtVbr).....................................................................................................................221

48 AtmResourceControls (Arc)....................................................................................................................................241

49 AtmRouting (ARtg)...................................................................................................................................................242

50 AtmSignalling (Sig).................................................................................................................................................. 244

51 AtmSrcPvc (Src).......................................................................................................................................................247

52 AtmSummaryAddress (SAddr)............................................................................................................................... 251

53 AtmTrafficManagementProv (Tm)...........................................................................................................................253

54 AtmUni (Uni)............................................................................................................................................................. 278

55 AtmUniAddress (Addr)............................................................................................................................................ 284

56 AtmUniAddressUniInfo (UniInfo)............................................................................................................................286

57 AtmUnspecifiedBitRate (Ubr)..................................................................................................................................288

58 AtmVirtualChannelConnection (Vcc)..................................................................................................................... 308

59 AtmVirtualChannelDescriptor (Vcd).......................................................................................................................310

60 AtmVirtualPathConnection (Vpc)............................................................................................................................314

61 AtmVirtualPathDescriptor (Vpd)............................................................................................................................. 316

62 AtmVirtualPathTerminator (Vpt)............................................................................................................................. 320

63 AtmVptCa (CA)......................................................................................................................................................... 322

64 AtmVptConstantBitRate (Cbr).................................................................................................................................325

65 AtmVptNonRealTimeVariableBitRate (NrtVbr)...................................................................................................... 329

66 AtmVptRealTimeVariableBitRate (RtVbr)...............................................................................................................332

67 AtmVptUnspecifiedBitRate (Ubr)............................................................................................................................336

68 AtmVptVcc (Vcc)...................................................................................................................................................... 339

69 AtmVptVpd (Vpd)......................................................................................................................................................341

70 BwPool (BwPool)......................................................................................................................................................346

Table of contents iv


71 Card (Card)................................................................................................................................................................351

72 CongestionManagement (Cm)................................................................................................................................ 355

73 DcsActiveAlarmServices (AAServ).........................................................................................................................359

74 DcsCollector (Col)....................................................................................................................................................360

75 DcsLpEngAalOverride (Ov).....................................................................................................................................362

76 DcsLpEngActiveAlarmList (AAList)....................................................................................................................... 364

77 DcsLpEngDSOverride (Ov)......................................................................................................................................365

78 DcsLpEngDataStream (Ds)......................................................................................................................................367

79 DcsSpooler (Sp)....................................................................................................................................................... 369

80 DualLpEquipmentProtection (Dlep)........................................................................................................................371

81 EDS1 (EDS1)............................................................................................................................................................. 374

82 EE1 (EE1).................................................................................................................................................................. 377

83 EsiToRegister (Esi).................................................................................................................................................. 380

84 Ethernet (Eth)............................................................................................................................................................382

85 EthernetPolicy (Policy)............................................................................................................................................ 389

86 EthernetStatistics (Stats).........................................................................................................................................392

87 EthernetVirtualLanIdentifier (Vlan).........................................................................................................................393

88 FcrcOverride (Ov).....................................................................................................................................................396

89 FcrcPassportQueueController (Pqc)......................................................................................................................399

90 FcrcPqcOverride (Ov).............................................................................................................................................. 400

91 FrameCoreResourceControl (Fcrc)........................................................................................................................ 402

92 GrmEmissionPriority (Ep)....................................................................................................................................... 403

93 GrmServiceCategory (Sc)........................................................................................................................................407

94 GrmTrafficManager (Tm)......................................................................................................................................... 409

95 Interface (If)...............................................................................................................................................................410

96 InwArp (Arp)..............................................................................................................................................................414

97 InwAtmConnection (Ac)...........................................................................................................................................416

98 InwAtmMpe (AtmMpe)..............................................................................................................................................421

99 InwDstPvc (DstPvc)..................................................................................................................................................428

100 InwEgressCosTreatment (Ect).............................................................................................................................. 429

101 InwHostEntryCos (Host)........................................................................................................................................434

102 InwIngressCosTreatment (Ict)...............................................................................................................................438

103 InwIp (Ip)..................................................................................................................................................................441

104 InwIpBootpPort (BootpP)...................................................................................................................................... 448

105 InwIpBootpRelayAgent (Bootp)............................................................................................................................ 451

Table of contents v


106 InwIpLogicalIf (LogicalIf)....................................................................................................................................... 453

107 InwIpMulticast (Mcast)...........................................................................................................................................458

108 InwIpOspf (Ospf).................................................................................................................................................... 460

109 InwIpPmm (Pmm)................................................................................................................................................... 471

110 InwIpPort (IpPort)................................................................................................................................................... 473

111 InwIpRip (Rip)......................................................................................................................................................... 482

112 InwIpRipIf (RipIf).....................................................................................................................................................486

113 InwIpRipIfNeighbor (Nbr).......................................................................................................................................491

114 InwIpRouteNextHop (Nh).......................................................................................................................................493

115 InwIpStatic (Static)................................................................................................................................................. 495

116 InwIpStaticRouteEntry (Route)............................................................................................................................. 498

117 InwLanApplication (La)..........................................................................................................................................502

118 InwLocalMediaInterface (If)................................................................................................................................... 507

119 InwMemoryManagement (Mm)..............................................................................................................................511

120 InwMultiLocalMedia (LocalMedia)........................................................................................................................ 513

121 InwOspfAreaAggregateEntry (Aggregate)...........................................................................................................514

122 InwOspfAreaEntry (Area).......................................................................................................................................516

123 InwOspfExport (Export).........................................................................................................................................519

124 InwOspfExportNetworkList (NetList)....................................................................................................................525

125 InwOspfHostEntry (Host).......................................................................................................................................527

126 InwOspfIf (OspfIf)................................................................................................................................................... 529

127 InwOspfIfNeighbor (Nbr)........................................................................................................................................535

128 InwOspfIfTypeOfService (TOS).............................................................................................................................537

129 InwOspfStubAreaEntry (Stub)...............................................................................................................................539

130 InwOspfVirtIfEntry (VirtIf)...................................................................................................................................... 542

131 InwPol (Policy)........................................................................................................................................................545

132 InwPolGrp (Pg)....................................................................................................................................................... 547

133 InwRipExport (Export)........................................................................................................................................... 554

134 InwRipExportNetworkList (Net)............................................................................................................................ 560

135 InwRipImport (Import)............................................................................................................................................562

136 InwRipImportNetworkList (Net).............................................................................................................................566

137 InwSpvcTerminationPoint (Stp)............................................................................................................................568

138 InwSrcPvc (SrcPvc)................................................................................................................................................570

139 InwStatic (Static).................................................................................................................................................... 572

140 InwStaticRouteEntry (Route).................................................................................................................................573

Table of contents vi


141 InwTosMap (TosMap).............................................................................................................................................575

142 InwTrafficManagement (Tm)..................................................................................................................................577

143 InwVirtualMedia (Vm).............................................................................................................................................579

144 InwVrDiffServPhb (Phb).........................................................................................................................................581

145 InwVrDiffServTc (Tc)..............................................................................................................................................586

146 InwVrDifferentiatedServicesDomain (Dsd).......................................................................................................... 592

147 IpLink (IpLk)............................................................................................................................................................595

148 Ismlc (Smlc)............................................................................................................................................................ 597

149 IsmlcSatelliteReferenceSystem (Srs)...................................................................................................................600

150 IuBc (IuBc).............................................................................................................................................................. 602

151 IuBcSignallingBearer (Sig)....................................................................................................................................603

152 IuBcSignallingBearerCbs (Cbs)............................................................................................................................604

153 IuBcSignallingBearerCbsCbcIp (CbcIp)...............................................................................................................606

154 IuPc (IuPc)...............................................................................................................................................................608

155 IuPcSignallingBearer (SignallingBearer)............................................................................................................. 610

156 IuPcSignallingBearerTal (Tal)............................................................................................................................... 611

157 IuPcSignallingBearerTalTalIp (TalIp)....................................................................................................................613

158 IuPsIf (IuPs).............................................................................................................................................................616

159 IuPsUplane (IuPsUplane).......................................................................................................................................620

160 IubIf (Iub).................................................................................................................................................................621

161 IubIfDstPvc (DstPvc)..............................................................................................................................................624

162 IubIfSpvcTerminationPoint (Stp).......................................................................................................................... 625

163 IubIfSrcPvc (SrcPvc)..............................................................................................................................................627

164 IubIfTrafficManagement (Tm)................................................................................................................................629

165 IucsIf (Iucs)............................................................................................................................................................. 636

166 IupsSgsnSubnet (SgsnSubnet).............................................................................................................................638

167 IurIf (Iur)...................................................................................................................................................................640

168 IuxIfPath (Path).......................................................................................................................................................642

169 LineAutomaticProtectionSwitching (Laps)..........................................................................................................644

170 LogicalProcessor (Lp)........................................................................................................................................... 654

171 LpGroup (LpG)........................................................................................................................................................658

172 LpeEngineering (Eng)............................................................................................................................................660

173 ModuleData (Mod).................................................................................................................................................. 661

174 NailedupAccessPoint (Nap).................................................................................................................................. 665

175 NetworkSynchronization (NS)...............................................................................................................................667

Table of contents vii


176 NtsServer (Server)..................................................................................................................................................674

177 NtsTime (Time)....................................................................................................................................................... 677

178 PcsLpgLogicalProcessor (Lp).............................................................................................................................. 679

179 PmsLanFramer (Framer)........................................................................................................................................681

180 PmsLanOamEthernet (OamEnet)..........................................................................................................................683

181 ProtocolPort (Pp)....................................................................................................................................................689

182 PsSaalNniTrafficManagement (Tm)......................................................................................................................692

183 PsSs7DstPvc (DstPvc)...........................................................................................................................................699

184 PsSs7Link (Lk)........................................................................................................................................................700

185 PsSs7Linkset (Ls).................................................................................................................................................. 702

186 PsSs7LocalSubsystem (Loc)................................................................................................................................ 708

187 PsSs7MessageTransferPartLayer3 (Mtp3)...........................................................................................................710

188 PsSs7Mtp3Connection (Mtp3Conn)..................................................................................................................... 720

189 PsSs7NailedupAdaptationPoint (Nap)................................................................................................................. 722

190 PsSs7RemoteSubsystem (Rem)...........................................................................................................................724

191 PsSs7Route (Ro).................................................................................................................................................... 727

192 PsSs7RouteInfo (Ri)...............................................................................................................................................729

193 PsSs7Routeset (Rs)............................................................................................................................................... 731

194 PsSs7SaalNni (SaalNni).........................................................................................................................................734

195 PsSs7ServiceIndicator (ServInd)..........................................................................................................................741

196 PsSs7SignallingConnControlPart (Sccp)............................................................................................................ 743

197 PsSs7SpvcTerminationPoint (Stp)....................................................................................................................... 748

198 PsSs7SrcPvc (SrcPvc)...........................................................................................................................................750

199 RspLpNpu (Npu).....................................................................................................................................................752

200 SaalUni (SaalUni)....................................................................................................................................................754

201 ScsLogicalProcessorType (Lpt)........................................................................................................................... 755

202 ScsSoftware (Sw)................................................................................................................................................... 758

203 Sdh (Sdh)................................................................................................................................................................ 760

204 Shelf (Shelf)............................................................................................................................................................ 767

205 SignallingBearer (Sig)............................................................................................................................................770

206 SignallingSystem7 (Ss7)........................................................................................................................................772

207 Sonet (Sonet)..........................................................................................................................................................773

208 TerminateSPvpAndSPvc (TermSP)...................................................................................................................... 780

209 Uplane (IuUplane)...................................................................................................................................................781

210 VirtualRouter (Vr)................................................................................................................................................... 782

Table of contents viii


211 casProvisioningSystem (Prov)............................................................................................................................. 787

212 casRoot (EM).......................................................................................................................................................... 790

213 wRncAAl2EndPoint (Aal2EndPoint).....................................................................................................................793

214 wRncDestinationSignalingPoint (DestSP)...........................................................................................................795

215 wRncEdch25902 (Edch).........................................................................................................................................798

216 wRncHsdpa25902 (Hsdpa).................................................................................................................................... 801

217 wRncInterfaceNode (RncIn).................................................................................................................................. 803

218 wRncIpFlow (IpFlow)..............................................................................................................................................807

219 wRncIpIf (IpIf)..........................................................................................................................................................811

220 wRncM3uaConnection (M3uaConn).....................................................................................................................815

221 wRncM3uaServiceIndicator (ServInd)..................................................................................................................817

222 wRncMtp3UserAdaptation (M3ua)........................................................................................................................819

223 wRncPeerM3uaEntity (PME)..................................................................................................................................823

224 wRncPeerM3uaProcess (PMP)..............................................................................................................................826

225 wRncQAAL2Parms (Qaal2P).................................................................................................................................829

226 wRncQAAL2Route (Route)....................................................................................................................................833

227 wRncSctpAssociation (Assoc)............................................................................................................................. 835

228 wRncSourceEndPoint (SrcEp)..............................................................................................................................840

229 wRncStreamControlTxProtocol (Sctp).................................................................................................................843

230 wRncTransportMap (Tm).......................................................................................................................................845

231 wRncTransportServiceEntry (Tse)....................................................................................................................... 848

232 Index of Customer Parameters............................................................................................................................. 853

233 Index of Manufacturer Parameters....................................................................................................................... 889

Table of contents ix


1 About this publicationThis document provides the RAN Model information and a list of the user accessible UMTS AccessNetwork configuration parameters.

Applicability

This publication applies to OAM06.0 System Release.

Audience

This document is intended for installation, operation, engineering and validation personnel, and anyother user who wants to know more about the UTRAN configuration parameters.

Prerequisites

It is recommended that readers become familiar with the following technical documents :

• Alcatel-Lucent 9353 Management System - System Overview (NN-20500-031)

How this publication is organized

This document is organized as follows:

• Volume 1: RAN Model Information

— RAN Model diagrams

— UTRAN dimensioning

— Online Creation/Deletion for Objects

— Adornments

• Volume 2: CNode Parameters

— Parameter description

— List of parameters per object

— Index of customer parameters

— Index of manufacturer parameters

• Volume 3: INode Parameters





• Volume 4: NodeB Parameters


1





• Volume 5: Micro NodeB Parameters





• Volume 6: OneBTS Parameters





• Volume 7: OAM Parameters





• Volume 8: POC7K Parameters





• Volume 9: POC15K Parameters





Vocabulary conventions

For a list of UMTS terms used in the publication, refer to the Alcatel-Lucent 9300 W-CDMA ProductFamily - Terminologypublication.

2


Roadmap to UTRAN documentation

For collection roadmaps information, see Alcatel-Lucent 9300 W-CDMA Product Family - DocumentCollection Overview and Update Summary (NN-20500-050).

3


2 Object/Parameter descriptionThis section gives the description of customer available objects and parameters.

Introduction

Parameters belong to a containing object. Object descriptions can be found in the first volume.

In the volumes 2 to 9, the parameters are grouped by Network Element: CNode, INode, NodeB,OAM, POC7K, POC15K (each volume is dedicated to 1 Network Element) and by containing object(those objects being alphabetically sorted for each Network Element).

For further information on the parameters network engineering, please contact your AccountManager who will support you into getting the UTRAN Parameters User Guide (UPUG) issued byAlcatel-Lucent Wireless Network Engineering group.

Object description

Each object is presented as follows: Unique Name (Name).

RNC objects have a unique name different from their name.

NodeB and OAM objects have a unique name equal to their name.

In each volume (from volume 2 to 9), the objects are sorted by alphabetical order according to theirUnique Name.

For each object, the following general information are presented:

• presence: the value of this field can be "optional" or "required"

• onlineCreation: the value of this field can be "AllowedWithParent" or "Allowed" or "NotAllowed".

• onlineDeletion: the value of this field can be "AllowedWithParent" or "Allowed" or "NotAllowed".

• verbs: the value of this field can be "add" or/and "delete", and it is used for Passportprovisioning.

• parents: this field gives the list of the containing objects

• children: this field gives the list of the contained objects

• identifiers: this field gives the list of the identifiers, and for each one, the correspondingIDcategory, IDqualifier, IDscope, Mininstances, Maxinstances as follows:

Name IDcategory IDqualifier IDscope Mininstances Maxinstances

Parameter description

For each parameter, the following fields are presented:

• parameter name

4


• domain: the three kinds of domains are:

— RNC: parameters are part of the RNC MIB definition and are hosted by WMS OAM andNetwork Element RNC

— BTS: parameters are part of the BTS MIB definition and are hosted by WMS OAM andNetwork Element BTS

— IN: parameters are part of the Inode MIB definition and are hosted by WMS OAM andNetwork Element Inode

— AN: parameters are part of the Anode MIB definition and are hosted by WMS OAM andNetwork Element Anode

— OAM: parameters are part of the WMS OAM MIB definition and are hosted by WMS OAMonly. Its are not declared in any Network Element MIB, so its are not mediated by buildfunction and not checked by audit function.

• description: the parameter definition

• class: the five kinds of class are:

— 0: The parameter cannot be modified and a new object instance must be created with therequested parameter value thanks to build process or on line command.

— 1: The object instance does not need to be locked to modify the parameter and themodification will be taken into account after the NE has restarted.

— 2: The object instance (or one of the parent object instance) must be locked to modify theparameter and the modification will be taken into account after the object instance (or theparent object instance) has been unlocked.

— 3: So called "on-line parameter definition". The object instance does not need to be locked tomodify the parameter and the modification will immediately be taken into account with noimpact on the service availability.

— READ ONLY: The "read only" parameters can only be displayed.

• presence: indicates if the configuration of the parameter is optional.

• visibility

Customer parameter accessible for the customer (read/write or read only)

Manufacturer Alcatel-Lucent defines these parameters and they are not accessible forcustomer

Customer Re-stricted

parameters that can be modified by the customer, but it is strongly recom-mended to set them according to Alcatel-Lucent specification as their modi-fications can have performance impacts on WMS

• data type: decimal, integer, float, boolean, etc.

• unit: the measurement unit of the value range, when applicable.

Unit

%

5


#s

ms

byte/s

cells/sec

dB

dBm

deg

h

Kb

km

meter

MHz

min

ms

number of cells

s

W

• range: the parameter value range. For example:

— Float: min = -35, max = 15, step = 0.1

— Enum (AdministrativeState): locked (0), unlocked (1), shuttingdown (2)

— String: length = 40 (Hex)

— Integer: min = 0, max = nRouteSet-1

• initial value: the value of a new parameter is [#false#] or [#null#] or [x]. This value is used:

— either when a customer wants to ensure the same performances before a UTRAN releaseupgrade

— or when a customer wants to deactivate a function

• def value comments

• recommended value: this value is recommended by Alcatel-Lucent for new networks roll outbefore the optimization. The recommended values take benefit of the performance ofAlcatel-Lucent UTRAN feature. For installed networks, the value to set depends on the chosenoptions or rules defined by the customer.

• rec val comments

Index description

At the end of each volume (from volume 2 to volume 9), two indexes are available summarizing allthe parameters presented in the concerned volume:

6


• an index for the customer parameters

• an index for the manufacturer parameters

These two indexes list the parameters by category (standard, inventory, states and status, dynamicdata, I&C) and by object sorted by alphabetical order, as follows:

• standard parameters

— Object A

– Parameter AA

– Parameter AB

– Parameter AC

— Object B

– Parameter BA

– Parameter BB

• inventory parameters

— Object A

– Parameter AD

– Parameter AE

— Object C

– Parameter CA

– Parameter CB

– Parameter CC

• states and status parameters

— Object A

– Parameter AF

– Parameter AG

– Parameter AH

— Object B

– Parameter BC

• dynamic data parameters

— Object D

– Parameter DA

– Parameter DB

– Parameter DC

• I&C parameters

— Object B

7


– Parameter BD

– Parameter BE

– Parameter BF

8


3 Aal2If (Aal2If)

The general information on this object are:

• Presence: optional

• OnLineCreation: N.A.

• OnLineDeletion: N.A.

• Verbs: add, delete

Parents:

EM - Aal2If

Child(ren):

Alcap - BwPool - Path - Stp -

Identifiers:

Name IDcategory IDqualifier IDscope MinIn-stances

MaxIn-stances

rdnId relative primary 16383

Links:

Source attribute Target Object Target Attribute

transportMap RncIn Tm

congestionManagement RncIn Cm

Parameters:

rdnId

Parameter name rdnId

Domain

Description Aal2Interface/n AAL2 based transport interface of aUTRAN Interface: contains user-plane path as wellas the related control plane. (for example interfaceto an AAL2 switch, MGW...).

Class NA

Presence required

9


Visibility customer

Unit

Range [1..16383]

Data Type Decimal

Initial Value

cacMethod

Parameter name cacMethod

Domain

Description This attribute specifies the type of AAL2 link call ad-mission control to be performed on this inter-face.The types defined are as follows: - none: AAL2link call admission control is disabled. - aal2if: AAL2link call admission control is performed on the sumof the bandwidth (ECR) of all paths provisioned un-der this aal2if instance when no instance of BwPoolis provisioned for the Aal2If, or on the sum of thebandwidth (ECR) of all paths provisioned in thesame instance of BwPool under this Aal2If. - qos:AAL2 link call admission control is performed at theAal2If level on all paths with the same qos levelwhen no BwPool is provisioned or on all paths withthe same qos level provisioned in the same BwPoolunder this Aal2If. Qos CAC enforces minimumbandwidth reservation on AAL2 paths which sharethe same quality of service. - path: AAL2 link calladmission control is performed on the path/ VCC it-self. In this mode, the path/VCC cannot be over-booked.

Class NA

Presence required

Visibility customer

Range none, aal2if, qos, path

Data type Enumeration

Initial value aal2if

cidSelectMethod

Parameter name cidSelectMethod

Domain

Description This attribute specifies the cid selection method onAAL2 link to be performed on this interface. The

10


types defined are as follows: - roundrobin: Roundrobin cid selection algorithm is performed under thisAAL2 interface. - standardQ2630: Q2630 standardcid selection algorithm is performed under thisAAL2 interface. - proprietaryConfig: Round robin cidselection is performed on iub interfaces, Q2630standard cid selection is performed on none-iub in-terface. When interworking with some core equip-ment, selecting roundRobin rather than stand-ardQ2630 might result in better operations.

Class NA

Presence required

Visibility customer

Range roundrobin, standardQ2630, proprietaryConfig


Initial value proprietaryConfig

commentText

Parameter name commentText

Domain

Description This attribute specifies an arbitrary string whoseuse is left to the discretion of the system adminis-trator. It is not used by the system. For example,this attribute could be used to specify the name ofthe Node B, remote RNC, AAL2 switch or MGWwhich is connected to this interface.

Class NA

Presence required

Visibility customer

Range [0..60]

Data type AsciiString

Initial value

congestionManagement

Parameter name congestionManagement

Domain

Description This attribute specifies a link reference to a valid in-stance of RncIn CongestionManagement/n com-ponent associated with this Aal2If.

Class NA

11


Presence optional

Visibility customer

Range RncIn Cm

Data type ServiceLink

Initial value N.A.

customerIdentifier

Parameter name customerIdentifier

Domain

Description This attribute holds the Customer Identifier (CID).Every component has a CID. If a component has acid attribute, the component's CID is the provi-sioned value of that attribute; otherwise the com-ponent inherits the CID of its parent. The top- levelcomponent has a CID of 0. Every operator sessionalso has a CID, which is the CID provisioned for theoperator's user ID. An operator will see only thestream data for components having a matchingCID. Also, the operator will be allowed to issuecommands for only those components which have amatching CID. An operator CID of 0 is used toidentify the Network Manager (referred to as "Net-Man" in DPN). This CID matches the CID of anycomponent. Values 1 to 8191 inclusive (equivalentto "basic CIDs" in DPN) may be assigned to specificcustomers.

Class NA

Presence required

Visibility customer

Range { [1..8191],0 }

Data type MixedDecimal

Initial value 0

ecrOverBook

Parameter name ecrOverBook

Domain

Description This attribute specifies the overbooking or the un-derbooking factor applied to the Iub equivalent cellrate. It ranges between 50% and 150%, a value of100% indicates no underbooking and no overbook-ing. Anything below 100% indicates underbooking

12


and anything above 100% indicates overbooking.Iur and Iucs must have this value set to 100%, over/under booking applies only to Aal2If/n used by Iub.An Aal2If linked to an Iub can not be linked to anyother Iu.

Class NA

Presence required

Visibility customer

Range [50..150]

Data type Decimal

Initial value 100

loadBalancingMethod

Parameter name loadBalancingMethod

Domain

Description This attribute specifies the type of dynamic distribu-tion or load balancing of AAL2 CIDs across pathssharing the same quality of service within this aal2ifinstance. The load balancing type can be one of: -link: CIDs are distributed based on optimal loadbal-ancing of accumulated bandwidth across eachAAL2 path. - pc: CIDs are distributed based on op-timal loadbalancing of load across protocol convert-er PMCs. The value of this attribute has no affecton the operation of the aal2if but should be set cor-rectly to facilitate an upgrade to a subsequent soft-ware release.

Class NA

Presence required

Visibility customer

Range link, pc


Initial value pc

qos0BwReservation

Parameter name qos0BwReservation

Domain

Description This attribute specifies the percentage reservationof the sum of bandwidth of all AAL2 paths whichshare this particular quality of service. A value of 0indicates no reservation (that is full sharing with oth-

13


er quality of service categories) while a value of 100indicates full reservation (that is no sharing of band-width with other quality of service categories.

Class NA

Presence required

Visibility customer

Range [0..100]

Data type Decimal

Initial value 0

qos0toQ2630QosCodepoint

Parameter name qos0toQ2630QosCodepoint

Domain

Description This attribute specifies the mapping of path QoS 0to standard Q2630 QoS Codepoint. The defaultmapping of path QoS 0 (delay sensitive path) is 1which represents stringent level in Q2630.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 1

qos1BwReservation


Domain

Description This attribute specifies the percentage reservationof the sum of bandwidth of all AAL2 paths whichshare this particular quality of service. A value of 0indicates no reservation (that is full sharing with oth-er quality of service categories) while a value of 100indicates full reservation (that is no sharing of band-width with other quality of service categories.

Class NA

Presence required

Visibility customer

Range [0..100]

Data type Decimal

14


Initial value 0



Domain

Description This attribute specifies the mapping of path QoS 1to standard Q2630 QoS Codepoint. The defaultmapping of path QoS 1 (none delay sensitive path)is 2 which represents tolerant level in Q2630.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 2

qos2BwReservation


Domain


Class NA

Presence required

Visibility customer

Range [0..100]

Data type Decimal

Initial value 0



Domain

Description This attribute specifies the mapping of path QoS 2to standard Q2630 QoS Codepoint. The default

15


mapping of path QoS 2 (HSDPA path) is 128 whichis a reserved level in Q2630.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 128

qos3BwReservation


Domain


Class NA

Presence required

Visibility customer

Range [0..100]

Data type Decimal

Initial value 0



Domain

Description This attribute specifies the mapping of path QoS 3to standard Q2630 QoS Codepoint. The defaultmapping of path QoS 3 (not in use) is 2 which isrepresents tolerant level in Q2630.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

16


Initial value 2

transportMap

Parameter name transportMap

Domain

Description This attribute specifies a link reference to a valid in-stance of RncIn TransportMap/n associated withthis Aal2If. TransportMap is a table used to mapUser plane allocation parameters to required trans-port service parameters for IP and ATM respect-ively. Transport service parameters are used as aninput to the Call Admission Control algorithm.

Class NA

Presence optional

Visibility customer

Range RncIn Tm


Initial value N.A.

umtsInterfaceList

Parameter name umtsInterfaceList

Domain

Description This attribute contains the list of links, each link rep-resenting an Iucs/Iur/Iub interface component at-tached to this Aal2If.

Class NA

Presence optional

Visibility customer

Range Iub IuUplane Aal2Lk, Iur IuUplane Aal2Lk, IucsIuUplane Aal2Lk

Data type Variable[24] List of ServiceLink

Initial value N.A.

17


4 Aal2IfAlcapBearer (Alcap)






Parents:

EM - Aal2If - Alcap

Child(ren):

AlcapConn - SaalUni -

Identifiers:

-

Links:


Parameters:

18


5 Aal2IfAlcapConn (AlcapConn)






Parents:

EM - Aal2If - Alcap - AlcapConn

Child(ren):

-

Identifiers:

-

Links:


Parameters:

destPointCode

Parameter name destPointCode

Domain

Description This attribute specifies the point code of the destin-ation node that this alcapBearer will use. The des-tination point code must be provisioned in one ofthe following formats, where the ITU vs ANSI isspecified by the protocolVariant attribute underMessageTransferPartLayer3: basic: The point codeis provisioned as a decimal number in the range1..16383 for ITU point code types or65536..16777215 for ANSI point code types. Avalue of 0 is not valid. segmented: The point code isprovisioned as three integers, separated by dots.For ITU point codes, the first integer must be in therange 0..7, the second integer must be in the range

19


0..255, and the third integer must be in the range0..7. For ANSI point codes, the first integer must bein the range 1..255, the second integer must be inthe range 0..255, and the third integer must be inthe range 0..255. A value of 0.0.0 is not valid. Thispoint code must match one of the destination pointcodes that are provisioned under SS7 MTP3. If thedestination point code changes at SS7 side, thispoint code must be changed as well.

Class NA

Presence required

Visibility customer

Range { [1..16383], }

Data type IntegerSequence

Initial value N.A.

networkIndicator

Parameter name networkIndicator

Domain

Description This attribute specifies whether the network is a na-tional network, or an international network. Eachmeaning of each valid value for networkIndicator isdescribed in SS7 Mtp3 specification Q.704. Thisnetwork indicator must match the network indicatorin SS7 side. international - MTP3 node is a memberof an "International" network. internationalSpare -MTP3 node is a member of an "International Spare"network. national - MTP3 node is a member of a"National" network. nationalSpare - MTP3 node is amember of a "National Spare" network.

Class NA

Presence required

Visibility customer

Range international, internationalSpare, national, nation-alSpare


Initial value international

20


6 Aal2IfAlcapSaalUni (SaalUni)






Parents:

EM - Aal2If - Alcap - SaalUni

Child(ren):

DstPvc - Nap - SrcPvc -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Aal2If/n AlcapBearer SaalUni/1 This componentrepresents a Signalling ATM Adaptation LayerUser-Netowrk Interface for the ALCAP connectionunder Aal2If .

Class NA

Presence required

Visibility customer

Unit

21


Range [1..1]

Data Type Decimal

Initial Value

22


7 Aal2IfDstPvc (DstPvc)






Parents:

EM - IpIf - BwPool - Path - DstPvc

EM - Aal2If - BwPool - Path - DstPvc

EM - Aal2If - Path - DstPvc

Child(ren):

-

Identifiers:

-

Links:


Parameters:

23


8 Aal2IfNailedupAccessPoint (Nap)






Parents:

EM - IpIf - BwPool - Path - Nap

EM - Aal2If - BwPool - Path - Nap

EM - Aal2If - Path - Nap

Child(ren):

-

Identifiers:

-

Links:


atmConnection • AtmIf Vpt Vcc Nep

• AtmIf Vpt Vcc Ep

• AtmIf Vcc Nep

•

Parameters:

atmConnection

Parameter name atmConnection

Domain

Description This attribute specifies the ATM nailed up endpointthat this path will use. For example, AtmIf/n Vcc/vpi.vci Nep.

Class NA

24


Presence required

Visibility customer

Range AtmIf Vpt Vcc Nep, AtmIf Vpt Vcc Ep, AtmIf VccNep, AtmIf Vcc Ep

Data type HwLink

Initial value N.A.

25


9 Aal2IfSpvcTerminationPoint (Stp)






Parents:

EM - Aal2If - Stp

Child(ren):

-

Identifiers:

-

Links:


linkToDlep • Lp

•

Parameters:

linkToDlep

Parameter name linkToDlep

Domain

Description This attribute links to ATMFP cards.

Class NA

Presence required

Visibility customer

Range Lp, Dlep

Data type HwLink

Initial value N.A.

26


softPvcRetryPeriod

Parameter name softPvcRetryPeriod

Domain

Description This attribute specifies the interval at which anSPVC connection attempts establishment after afailed setup attempt occurs.

Class NA

Presence required

Visibility customer

Range [10..3600]

Data type Decimal

Initial value 20

27


10 Aal2IfSrcPvc (SrcPvc)






Parents:

EM - IpIf - BwPool - Path - SrcPvc

EM - Aal2If - BwPool - Path - SrcPvc

EM - Aal2If - Path - SrcPvc

Child(ren):

Tm -

Identifiers:

-

Links:


Parameters:

calledAddress

Parameter name calledAddress

Domain

Description This attribute specifies the NSAP address of thecalled SPVC endpoint.

Class NA

Presence required

Visibility customer

Range [40..40]

Data type HexString

28


Initial value N.A.

calledVpiVci

Parameter name calledVpiVci

Domain

Description If the destination endpoint is an AtmIf Vcc, this at-tribute specifies the called VPI.VCI of the destina-tion AtmIf Vcc.

Class NA

Presence required

Visibility customer

Range { [0..4095],[0..65535], }


Initial value N.A.

remotePathIdentifier

Parameter name remotePathIdentifier

Domain

Description This attribute specifies the remote Aal2 path identifi-er.

Class NA

Presence required

Visibility customer

Range { [1..65535],notUsed }


Initial value notUsed

29


11 Aal2IfTrafficManagement (Tm)


• Presence: required



Parents:

EM - IpIf - BwPool - Path - SrcPvc - Tm

EM - Aal2If - BwPool - Path - SrcPvc - Tm

EM - Aal2If - Path - SrcPvc - Tm

Child(ren):

-

Identifiers:

-

Links:


Parameters:

atmServiceCategory

Parameter name atmServiceCategory

Domain

Description This attribute specifies the desired ATM service cat-egory for this connection.

Class NA

Presence required

Visibility customer

Range unspecifiedBitRate, constantBitRate, rtVariable-BitRate, nrtVariableBitRate


Initial value rtVariableBitRate

30


rxTrafficDescParm

Parameter name rxTrafficDescParm

Domain

Description This attribute is a vector of five traffic parameterswhose meanings are defined by the rxTrafficDesc-Type attribute. If the value of the rxTrafficDescTypeattribute is sameAsTx, the values provisioned in thisattribute are ignored. The traffic parameters for thereceive direction are taken from the txTraffic-DescParm attribute. The values of peak cell rate(PCR), sustained cell rate (SCR), and Minimum CellRate (MCR) are expressed in cell/s. Maximum burstsize (MBS) is expressed in cells. The value of CD-VT is expressed in microseconds. The values ofPCR, SCR, MCR, MBS and CDVT are used for us-age parameter control (UPC). When rxTrafficDesc-Type is 1 or 2, all of the parameters must be set tozero (unused). When rxTrafficDescType is 3, para-meter 1 represents the PCR for CLP equal to 0 and1 traffic; and parameter 4 represents the CDVT.Parameter 1 must be non-zero. Parameters 2 and 3must be set to zero (unused). When rxTrafficDesc-Type is 4, parameter 1 represents the PCR for CLPequal to 0 and 1 traffic; parameter 2 represents thePCR for CLP equal to 0 traffic with cell discard; andparameter 4 represents the CDVT. Parameters 1and 2 must be non-zero. Parameter 3 must be setto zero (unused). Parameter 1 must be greater thanor equal to parameter 2. When rxTrafficDescType is5, parameter 1 represents the PCR for CLP equalto 0 and 1 traffic; parameter 2 represents the PCRfor CLP equal to 0 traffic with cell tagging; and para-meter 4 represents the CDVT. Parameters 1 and 2must be non-zero. Parameter 3 must be set to zero(unused). Parameter 1 must be greater than orequal to parameter 2. When rxTrafficDescType is a6, parameter 1 represents the PCR for CLP equalto 0 and 1 traffic; parameter 2 represents the SCRfor CLP equal to 0 and 1 traffic; parameter 3 repres-ents the MBS for CLP equal to 0 and 1 traffic; andparameter 4 represents the CDVT. Parameters 1, 2and 3 must be non-zero. Parameter 1 must begreater than or equal to Parameter 2. When rxTraf-ficDescType is 7, parameter 1 represents the PCRfor CLP equal to 0 and 1 traffic; parameter 2 repres-ents the SCR for CLP equal to 0 traffic with cell dis-card; parameter 3 represents the MBS for CLPequal to 0 traffic; and parameter 4 represents theCDVT. Parameters 1, 2 and 3 must be non-zero.

31


Parameter 1 must be greater than or equal to para-meter 2. When rxTrafficDescType is 8, parameter 1represents the PCR for CLP equal to 0 and 1 traffic;parameter 2 represents the SCR for CLP equal to 0traffic with cell tagging; parameter 3 represents theMBS for CLP equal to 0 traffic; and parameter 4represents the CDVT. Parameter 1, 2 and 3 mustbe non-zero. Parameter 1 must be greater than orequal to parameter 2. When rxTrafficDescType is 9,parameter 1 represents the PCR; parameter 2 rep-resents the CDVT; parameter 3 represents theMCR. Parameter 4 is not used and must be zero.Parameter 1 must be non- zero and must be great-er than or equal to parameter 3. Parameter 3 mayoptionally be zero. If the value of CDVT either inparameter 2 or in parameter 4 is zero, the CDVT istaken from the CA defaults for the particular atm-ServiceCategory of this connection. Parameter 5 ofthe rxTrafficDescParm is always unused. When rx-TrafficDescriptorType is 3 through 8, there are cer-tain extreme combinations of rxTrafficDescParmwhich are outside the capabilities of the UPC hard-ware. The check prov command detects such casesand generates an error message. If this happens,adjust the parameters until they fall within the sup-ported limits. To calculate the limits, use the follow-ing formulae: I1 = 1,000,000,000 / PCR L1 = CDVT* 1000 I2 = 1,000,000,000 / SCR L2 = CDVT +(MBS - 1) * (I2 - I1) Note that I2 and L2 only applywhen the rxTrafficDescriptorType is 6 through 8.For 16pOC3SmIrAtm card, L2 must be less than orequal to 2,674,011,406. For 16pOC3PosAtm card,L2 must be less than or equal to 17,179,869,180.

Class NA

Presence required

Visibility customer

Range [0..2147483647]

Data type Fixed[1..5] List of Decimal

Initial value 0,0,0,0,0

rxTrafficDescType

Parameter name rxTrafficDescType

Domain

Description This attribute specifies the type of traffic manage-ment which is applied to the receive direction of thisconnection as defined in the ATM Forum. The rx-

32


TrafficDescType determines the number and mean-ing of the parameters in the rxTrafficDescParm at-tribute. The value sameAsTx means the rxTraffic-DescType as well as the rxTrafficDescParm attrib-ute values are taken from the values of the txTraf-ficDescType and txTrafficDescParm attributes.

Class NA

Presence required

Visibility customer

Range 1, 2, 3, 4, 5, 6, 7, 8, 9, sameAsTx


Initial value sameAsTx

txTrafficDescParm

Parameter name txTrafficDescParm

Domain

Description This attribute is a vector of five traffic parameterswhose meanings are defined by the txTrafficDesc-Type attribute. The values of peak cell rate (PCR),sustained cell rate (SCR), Minimum Cell Rate(MCR) and requested shaping rate are expressedin cell/s. Maximum burst size (MBS) is expressed incells. CDVT is expressed in microseconds. The val-ues of PCR, SCR, MCR, MBS and CDVT are usedfor connection admission control (CAC). The valueof CDVT is only used for connections where theatmServiceCategory is constantBitRate. For all oth-er values of atmServiceCategory, CDVT is ignored.The values of PCR, SCR, MCR and requestedshaping rate are used to determine the actual shap-ing rate where traffic shaping is enabled. When tx-TrafficDescType is 1 or 2, all of the parametersmust be set to zero. When txTrafficDescType is 3,parameter 1 represents the PCR for CLP equal to 0and 1 traffic; parameter 4 represents the CDVT;and parameter 5 represents the requested shapingrate. A non-zero value in parameter 5 overrides anyvalue in parameter 1. This result is used as thePCR. Parameter 1 must be non-zero. Parameters 2and 3 must be zero. When txTrafficDescType is 4,parameter 1 represents the PCR for CLP equal to 0and 1 traffic with cell discard; parameter 2 repres-ents the PCR for CLP equal to 0 traffic; parameter 4represents the CDVT; and parameter 5 representsthe requested shaping rate. A non-zero value inparameter 5 overrides any value in parameter 1.

33


This result is used as the PCR. Parameter 1 mustbe greater than or equal to parameter 2. Paramet-ers 1 and 2 must be non-zero. Parameter 3 must bezero. When txTrafficDescType is 5, parameter 1represents the PCR for CLP equal to 0 and 1 trafficwith cell tagging; parameter 2 represents the PCRfor CLP equal to 0 traffic; parameter 4 representsthe CDVT; and parameter 5 represents the reques-ted shaping rate. A non-zero value in parameter 5overrides any value in parameter 1. This result isused as the PCR. Parameter 1 must be greaterthan or equal to parameter 2. Parameters 1 and 2must be non-zero. Parameter 3 must be zero.When txTrafficDescType is 6, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0 and1 traffic; parameter 3 represents the MBS for CLPequal to 0 and 1 traffic; parameter 4 represents theCDVT; and parameter 5 represents the requestedshaping rate. A non-zero value in parameter 5 over-rides any value in parameter 1. This result is usedas the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal toparameter 2. Parameter 5, must either be zero(unused) or greater than or equal to parameter 2.When txTrafficDescType is 7, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0 withcell discard; parameter 3 represents the MBS forCLP equal to 0 traffic; parameter 4 represents theCDVT; and parameter 5 represents the requestedshaping rate. A non-zero value in parameter 5 over-rides any value in parameter 1. This result is usedas the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal toparameter 2. Parameter 5, must either be zero(unused) or greater than or equal to parameter 2.When txTrafficDescType is 8, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0traffic with cell tagging; parameter 3 represents theMBS for CLP equal to 0 traffic; parameter 4 repres-ents the CDVT; and parameter 5 represents the re-quested shaping rate. A non-zero value in paramet-er 5 overrides any value in parameter 1. This resultis used as the PCR. Parameters 1, 2 and 3 must benon-zero. Parameter 1 must be greater than orequal to parameter 2. Parameter 5, must either bezero (unused) or greater than or equal to parameter2. When txTrafficDescType is 9, parameter 1 rep-resents the PCR; parameter 2 represents the CD-

34


VT; parameter 3 represents the MCR; parameter 4and parameter 5 represent are not used and mustbe zero. Parameter 1 must be non-zero and mustbe greater than or equal to parameter 3. Parameter3 may be optionally zero. Whenever it is valid forPCR to be specified, parameter 5 may also be usedto specify a requested shaping rate. A non-zerovalue in parameter 5 overrides the value in para-meter 1 and is used as the peak cell rate in calcula-tions of CAC and shaping rate. When the atmSer-viceCategory is availableBitRate (ABR), the shap-ing rate is dynamically chosen, based on the ABRflow control mechanism, as a value between theMCR and the PCR or the requested shaping rate ifapplicable. For txTrafficDescType 3, 4 and 5, thetransmit traffic is shaped at the next available shap-ing rate less than the PCR. For txTrafficDescType6, 7 and 8 if linear traffic shaping is selected, thetransmit traffic is shaped at the highest availablerate which is between PCR and SCR. However, ifthere is no available shaping rate between PCRand SCR, traffic is shaped at the next rate abovethe PCR. For txTrafficDescType 6, 7 and 8 if in-verse-UPC traffic shaping is selected, the transmittraffic is shaped at a variable rate which conformsto the PCR, SCR and MBS of the connection trafficdescriptor.

Class NA

Presence required

Visibility customer

Range [0..2147483647]



txTrafficDescType

Parameter name txTrafficDescType

Domain

Description This attribute specifies the type of traffic manage-ment which is applied to the transmit direction ofthis connection as defined in the ATM Forum. ThetxTrafficDescType determines the number andmeaning of the parameters in the txTraffic-DescParm attribute.

Class NA

Presence required

35


Visibility customer

Range 1, 2, 3, 4, 5, 6, 7, 8, 9


Initial value 6

36


12 Aal2Link (Aal2Lk)






Parents:

EM - Iur - IuUplane - Aal2Lk

EM - Iub - IuUplane - Aal2Lk

EM - Iucs - IuUplane - Aal2Lk

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


linkToAal2If Aal2If

Parameters:

rdnId


Domain

Description Iucs/n Uplane Aal2Lk/n Iur/n Uplane Aal2Lk/n Iub/nUplane Aal2Lk/n This component represents theUplane aal2 link/n aspects of this Iucs or Iur or Iub.For Iucs and Iur this component may be one ofmany alternate routes that can be used for the inter-

37


face. For Iub, only a single route is available.

Class NA

Presence required

Visibility customer

Unit

Range [1..10]

Data Type Decimal

Initial Value

linkToAal2If

Parameter name linkToAal2If

Domain

Description This attribute specifies the link to one Aal2If whichthe interface uses.

Class NA

Presence optional

Visibility customer

Range Aal2If

Data type HwLink

Initial value N.A.

38


13 ApmOm (Om)






Parents:

EM - Lp - Sonet - Om

EM - Lp - Eth - Om

EM - Lp - Sdh - Om

Child(ren):

-

Identifiers:

-

Links:


Parameters:

type

Parameter name type

Domain

Description This attribute specifies the expected optical moduletype. The values for the type and insertedType at-tributes must match; otherwise, an alarm is raisedand the OpticalModule component is disabled.none: This value indicates that no optical moduletype is specified. LX: This value indicates that theoptical module is a gigabit ethernet type with the fol-lowing specifications: Wavelength = 1310nm, Media= Single-Mode. SX: This value indicates that the op-tical module is a gigabit ethernet type with the fol-

39


lowing specifications: Wavelength = 850nm, Media= Multi-Mode. OC3SmLr: This value indicates thatthe optical module is an OC3 type with the followingspecifications: Wavelength =1310 nm, Media =Single-Mode, Reach = 80Km (Long Reach).OC3SmIr: This value indicates that the optical mod-ule is an OC3 type with the following specifications:Wavelength = 1310 nm, Media = Single-Mode,Reach = 15Km (Intermediate Reach). OC3MmSr:This value indicates that the optical module is anOC3 type with the following specifications:Wavelength = 1310 nm, Media = Multi-Mode,Reach = 2Km (Short Reach). OC12SmLr: Thisvalue indicates that the optical module is an OC12type with the following specifications: Wavelength =1310 nm, Media = Single-Mode, Reach = 80Km(Long Reach). OC12SmIr: This value indicates thatthe optical module is an OC12 type with the follow-ing specifications: Wavelength = 1310 nm, Media =Single-Mode, Reach = 15Km (Intermediate Reach).OC48SmLr: This value indicates that the opticalmodule is an OC48 type with the following specific-ations: Wavelength = 1310 nm, Media = Single-Mode, Reach = 80Km (Long Reach). OC48SmLr2:This value indicates that the optical module is anOC48 type with the following specifications:Wavelength = 1550 nm, Media = Single-Mode,Reach = 80Km (Long Reach). OC48SmIr: Thisvalue indicates that the optical module is an OC48type with the following specifications: Wavelength =1310 nm, Media = Single-Mode, Reach = 15Km(Intermediate Reach).

Class NA

Presence required

Visibility customer

Range none, LX, SX, OC3SmLr, OC3SmIr, OC3MmSr,OC12SmLr, OC12SmIr, OC48SmLr, OC48SmLr2,OC48SmIr


Initial value none

typeCheck

Parameter name typeCheck

Domain

Description This attribute specifies the capability to verify theoptical module type. This attribute can be changed

40


in debug mode only. enabled: This value indicatesthat the type attribute needs to match the inserted-Type attribute in order to have the port enabled. dis-abled: This value indicates that the type attributedoesn't need to match the insertedType attribute inorder to have the port enabled.

Class NA

Presence required

Visibility customer

Range enabled, disabled


Initial value enabled

41


14 ApmSts (Sts)






Parents:

EM - Lp - Sonet - Sts

EM - Laps - Sts

Child(ren):

Cell -

Identifiers:


MaxIn-stances


Links:


applicationFramerName AtmIf

Parameters:

rdnId


Domain

Description Lp/n Sonet/n Sts/n Laps/n Sts/n Pbg/n Sts/n Thiscomponent controls a path signal that is carriedwithin a SONET signal. The instance number of theSts component must be 0 for components on cardsthat do not support channelization. On FPs support-ing channelization. the Sts index indicates the sub-channel within the main optical payload.

42


Class NA

Presence required

Visibility customer

Unit

Range [0..11]

Data Type Decimal

Initial Value

applicationFramerName

Parameter name applicationFramerName

Domain

Description This attribute defines which application is runningon the path.

Class NA

Presence optional

Visibility customer

Range AtmIf

Data type Link

Initial value N.A.

concatNumber

Parameter name concatNumber

Domain

Description This attribute specifies the STS concatenation levelfor the Sts component on channelized cards. Itmust be set to a concatenation level supported bythe FP upon which the Sts is defined, except fornon-channelized cards, in which case it must be setto 0. For example, a value of 1 in this attributewould represent STS-1 concatenation, while avalue of 3 would represent STS-3c, a value of 12would represent STS-12c, and so forth. Sts chan-nelization to the tributary level is supported only ifthis attribute is set to 1.

Class NA

Presence optional

Visibility customer

Range 0, 1, 3, 12, 48


43


Initial value N.A.

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

expectedRxPathTrace

Parameter name expectedRxPathTrace

Domain

Description This attribute specifies the expected path traceidentifier which is used to identify the high orderpath. This attribute must match the correspondingtxPathTrace provisioned at the transmitting equip-ment end. If it does not, an alarm is issued. Thefunctionality supported by this attribute is not avail-able.

Class NA

Presence required

Visibility customer

44


Range [0..64]


Initial value

ifAdminStatus

Parameter name ifAdminStatus

Domain

Description The desired state of the interface. The up state in-dicates the interface is operational. The down stateindicates the interface is not operational. The test-ing state indicates that no operational packets canbe passed.

Class NA

Presence required

Visibility customer

Range up, down, testing


Initial value up

txPathTrace

Parameter name txPathTrace

Domain

Description This attribute specifies the high order path identifier.The string must be constructed with 7-bit charactersonly. The path identifier is padded by null charac-ters if necessary to form a 64-octet path trace mes-sage transmitted in byte J1 of 64 outgoing SONETframes. At the remote end, the path trace is reas-sembled, and the message is compared to the ex-pectedRxPathTrace attribute. If a mismatch is de-tected, an alarm is issued. The functionality suppor-ted by this attribute is not available.

Class NA

Presence required

Visibility customer

Range [0..64]


Initial value

45


46


15 ApmVc4 (Vc4)






Parents:

EM - Lp - Sdh - Vc4

EM - Laps - Vc4

Child(ren):

Cell -

Identifiers:


MaxIn-stances


Links:


applicationFramerName AtmIf

Parameters:

rdnId


Domain

Description Lp/n Sdh/n Vc4/n Laps/n Vc4/n This componentcontrols a VC4 path signal that is carried within anSDH signal. The instance number of the Vc4 com-ponent is 0. The Vc4 component may only bedefined on Nortel Networks Multiservice Switch FPsthat support STM.

47


Class NA

Presence required

Visibility customer

Unit

Range [0..3]

Data Type Decimal

Initial Value



Domain

Description This attribute defines which application is runningon the path.

Class NA

Presence optional

Visibility customer

Range AtmIf

Data type Link

Initial value N.A.

concatNumber

Parameter name concatNumber

Domain

Description This attribute specifies the number of contiguousAdministration Unit 4 (AU-4) concatenated together.AU-4s can be concatenated together to form anAU-4-4c or AU-4-16c (4 or 16 concatenated AU-4s)which can transport payloads requiring greater ca-pacity than one Container-4 capacity. Only Vc4/0can have concatNumber set to 16 and only Vc4/0,Vc4/ 4, Vc4/8 or Vc4/12 can have concatNumberset to 4. When a Vc4 uses concatenation, the otherconcatenated Vc4 instance number cannot beused. For example, if Vc4/0 concatNumber is 4, thenext provisionable Vc4 is Vc4/4. Vc4 channeliza-tion, indicated by provisioning subcomponents suchas Vc12, is allowed only if this attribute is set to 1.This value must be set to 0 for card types which donot support the use of this attribute.

Class NA

48


Presence optional

Visibility customer

Range 0, 1, 4, 16


Initial value N.A.

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

expectedRxPathTrace

Parameter name expectedRxPathTrace

Domain

Description This attribute specifies the expected path traceidentifier which is used to identify the high orderpath. This attribute must match the correspondingtxPathTrace provisioned at the transmitting equip-ment end. If it does not, an alarm is issued. The

49


functionality supported by this attribute is not avail-able.

Class NA

Presence required

Visibility customer

Range [0..64]

Data type ExtendedAsciiString

Initial value

ifAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up

pathTraceLength

Parameter name pathTraceLength

Domain

Description This attribute specifies the transmitted path tracemessage length. The pathTraceLength attribute attransmitting and receiving end must match.

Class NA

Presence required

Visibility customer

Range 16, 64


Initial value 16

50


txPathTrace

Parameter name txPathTrace

Domain

Description This attribute specifies the high order path identifier.The string must be constructed with 7-bit charactersonly. If pathTraceLength is 16, the path identifier isprefixed with a CRC byte and padded by null char-acters if necessary to form a 16-octet path tracemessage transmitted in byte J1 of 16 outgoing SDHframes. If pathTraceLength is 64, the path identifieris padded by null characters if necessary to form a64-octet path trace message transmitted in byte J1of 64 outgoing SDH frames. At the remote end, thepath trace is reassembled, the CRC is checked ifnecessary and the message is compared to the ex-pectedRxPathTrace attribute. If a mismatch is de-tected, an alarm is issued. Usage guidelines forpath trace message are found in clause 3 of the ITUG.831 standard which defines the Access PointIdentifier format. The functionality supported by thisattribute is not available.

Class NA

Presence required

Visibility customer

Range [0..64]


Initial value

51


16 ArcApcOverride (Ov)





Parents:

EM - Lp - Eng - Arc - Apc - Ov

Child(ren):

-

Identifiers:

-

Links:


Parameters:

bufferLimitPerEP

Parameter name bufferLimitPerEP

Domain

Description This attribute specifies the maximum buffer size al-lowed for each of the eight emission priorities oftraffic towards the link. A class buffer pool limit isdesigned to prevent one emission priority from con-suming all the available buffer space. The eight buf-ferLimitPerEP values represent maximum buffersize per emission priority, in number of cells. Toguarantee proper buffer isolation among emissionpriorities, the sum of bufferLimitPerEP values for allemission priorities must not exceed the total bufferspace available, which is 261118 cells. The defaultvalues are approximately 15%, 0%, 15%, 50%,15%, 0%, 0%, and 5% of total available bufferspace for emission priorities 0 through 7 respect-ively. Note: For APC based cards, the minimum

52


value of bufferLimitPerEP for EP0 is32.

Class NA

Presence required

Visibility customer

Range [0..261118]


Initial value 39168,0,39168,130559,39168,0,0,13055

connectionPoolCapacity

Parameter name connectionPoolCapacity

Domain

Description This attribute specifies the maximum number ofconnections (VCC, VPC, and VPT) that can be con-figured on the APC instance of the Logical Pro-cessor. One connection resource is used for VCCand VPC connections, two connection resources fora basic VPT and three connection resources for astandard VPT. The value of this attribute restrictsthe sum of the (maxVccs + maxVpcs + (maxVpts *3) + 1) across all AtmIf components bound to thisAPC instance. Note that three connections are usedfor each standard VPT and two for each basic VPT.The value of this attribute should be less than orequal to the sum of the connectionPoolCapacityplus the protectedConnectionPoolCapacity of theArc component. The default value derivedFromArcis obtained using the following equation:(connectionPoolCapacity + protectedConnection-PoolCapacity)/ number of APC components on theFP.

Class NA

Presence required

Visibility customer

Range { [1..16000],derivedFromArc }


Initial value derivedFromArc

highPriorityEpdOffset

Parameter name highPriorityEpdOffset

Domain

Description This attribute specifies the high priority Early Packet

53


Discard (EPD) offset for connection queues. OnATM IP FPs a given connection queue is associ-ated with one of eight emission priorities (EP).These include six unshaped EPs, one exclusiveVBR shaper EP and one ABR/VBR shaper EP. Thisattribute specifies the EPD offset for the exclusiveVBR shaper EP and the first four (higher priority)unshaped EPs. This offset is used to derive a con-nection EPD threshold for a given Congestion Con-trol (CC) level by subtracting the offset from the AllPacket Discard (APD) threshold at the same CClevel. The APD thresholds are themselves derivedfrom the transmit queue limit. The EPD thresholdonly applies to a connection if the Packet-Wise Dis-card feature is requested. The Packet-Wise Discardfeature can be enabled only if the transmit queuelimit is at least 5.71 times the EPD offset. This en-sures that the derived EPD threshold will never beless than 17.5% of the transmit queue limit. If thiscondition is not satisfied, the Packet-Wise Discardfeature for the connection is automatically disabled.Due to the above constraint, if the operator wishesto decrease the transmit queue limit and still havethe Packet-Wise Discard feature enabled on theconnection then this offset must be set to a lowervalue that meets the above requirement. Due tohardware granularity the actual value of the EPDoffset may not match exactly the value provisioned.The actual value is displayed under the ATM Con-nection Administrator service category subcompon-ents on ATM IP FPs. This attribute does not applyto CQC FPs.

Class NA

Presence required

Visibility customer

Range [5..1024]

Data type Decimal

Initial value 28

lowPriorityEpdOffset

Parameter name lowPriorityEpdOffset

Domain

Description This attribute specifies the low priority Early PacketDiscard (EPD) offset for connection queues. OnATM IP FPs a given connection queue is associ-ated with one of eight emission priorities (EP).

54


These include six unshaped EPs, one exclusiveVBR shaper EP and one ABR/VBR shaper EP. Thisattribute specifies the EPD offset for the exclusiveABR/VBR shaper EP and the last two (lower prior-ity) unshaped EPs. This offset is used to derive aconnection EPD threshold for a given CongestionControl (CC) level by subtracting the offset from theAll Packet Discard (APD) threshold at the same CClevel. The APD thresholds are themselves derivedfrom the transmit queue limit. The EPD thresholdonly applies to a connection if the Packet-Wise Dis-card feature is requested. The Packet-Wise Discardfeature can be enabled only if the transmit queuelimit is at least 5.71 times the EPD offset. This en-sures that the derived EPD threshold will never beless than 17.5% of the transmit queue limit. If thiscondition is not satisfied, the Packet-Wise Discardfeature for the connection is automatically disabled.Due to the above constraint, if the operator wishesto decrease the transmit queue limit and still havethe Packet-Wise Discard feature enabled on theconnection then this offset must be set to a lowervalue that meets the above requirement. Due tohardware granularity the actual value of the EPDoffset may not match exactly the value provisioned.The actual value is displayed under the ATM Con-nection Administrator service category subcompon-ents on ATM IP FPs. This attribute does not applyto CQC FPs.

Class NA

Presence required

Visibility customer

Range [5..1024]

Data type Decimal

Initial value 200

portCongestionPolicy

Parameter name portCongestionPolicy

Domain

Description This attribute specifies the congestion behavior ofall ports on this FP. It applies only to transmit trafficand does not apply to the CBR service category.When the value is aggregate, the enqueue decisionof cells or frames to a queue is based upon the con-gestion state of the entire port to which the queuebelongs. A port is defined to be as congested as the

55


most congested queue amongst all its queues.Thus, for example, if an nrt-VBR queue is conges-ted, the rt-VBR queue also experiences discardseven though the rt-VBR queue may itself not becongested. Setting this attribute to aggregate as-sures that the low priority queues are also servicedin the event of congestion. If this attribute is set toaggregate then rt-VBR must not be configured to docommon queuing and its emission priority should beset to a number numerically smaller than or equal to3. Another impact of setting this attribute to aggreg-ate is that the per connection queue limits for nrt-VBR and UBR connections will be increased to thelink pool size and their discard thresholds will bemodified to be aligned with the free list discardthresholds. When the value of this attribute is set toindividualQueue, the enqueue decision of cells orframes to a queue is based solely upon the conges-tion state of that queue, not the port. This settingassures that the absolute priority of the traffic istaken into account, regardless of whether the lowerpriority queues are being served. On3pOC3SmAtm2 and 3pOC3MmAtm2 cards, if morethan one override component exists, they musthave the same setting for this attribute. Otherwise,setting the attribute under one override componentapplies to the entire card.

Class NA

Presence required

Visibility customer

Range aggregate, individualQueue


Initial value individualQueue

56


17 ArcAtlantaPortController (Apc)


• Presence: dynamicOptional




Parents:

EM - Lp - Eng - Arc - Apc

Child(ren):

Ov -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Lp/n Eng Arc Apc/n The Apc component is similarto the Aqm component. Apc has an additional provi-sional attribute, Lp/n Eng Arc Apc/n Ov bufferLim-itPerEP used to specify the maximum buffer spacesallowed to the emission priorities on an Apc in-stance.

Class NA

Presence required

Visibility customer

57


Unit

Range [0..3]

Data Type Decimal

Initial Value

58


18 ArcOverride (Ov)






Parents:

EM - Lp - Eng - Arc - Ov

Child(ren):

-

Identifiers:

-

Links:


Parameters:

connectionPoolCapacity

Parameter name connectionPoolCapacity

Domain

Description This attribute specifies the maximum number of un-spared AtmIf connections (VCC, VPC, and VPT)that can be established on this FP. One connectionresource is used for VCC and VPC connections,two connection resources for a basic VPT and threeconnection resources for a standard VPT. If the Lo-gical Processor is associated with a card of a cardtype other than one of the following: 3pE3Atm,3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm,3pE1Atm, 3pDS1Atm, 2pJ6MAtm; the value of theattribute restricts the sum of the (maxVccs +maxVpcs+ (maxVpts * 3) + 1) for all AtmIfs boundto this Logical Processor. If the Logical Processor is

59


associated with a card of one of the following cardtypes: 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm,3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm;the number of available connections are distributedequally across the ports on the FP. The number ofconnections associated to a particular port limits thesize of the VCC space which can be defined by theConnMap of the AtmIf linked to the port. If the Con-nMap component does not exist, its default settingsare used for this check. Furthermore, the value ofthis attribute is restricted based on the number ofports on the card. For one port cards, the minimumis 512, the maximum is 4096 and the value must bedivisible by 256. For two port cards, the minimum is1024, the maximum is 8192 and the value must bedivisible by 512. For three port cards, the minimumis 1536, the maximum is 7680 and the value mustbe divisible by 768. If the Logical Processor is asso-ciated with a card of one of the following card types:8pE1Atm or 8pDS1Atm, the maximum value for thisattribute is 10752. If the Logical Processor is asso-ciated with a card of one of the following card types:32pDS1Msa or 32pE1Msa, the default value of theattribute is 4096. If the Logical Processor is associ-ated with a card of one of the following card types:1pOC48SmSrPos or 1pOC48SmIrPos, the maxim-um value for this attribute is 24000. If the LogicalProcessor is associated with a card of one of thefollowing card types: 32pDS1MsaMtp,32pE1MsaMtp, 32pDS1MsaMt, 32pE1MsaMt,32pDS1MsaStp, 32pE1MsaStp, 32pDS1MsaSt or32pE1MsaSt; the default value of the attribute is8192. The default value of the attribute is 3072 forLogical Processor associated with all other cardtypes. The maximum number of supported connec-tions per APC is 16000 for 16pOC3SmIrAtm,4pOC12SmIrAtm, and 4pOC12SmLrAtm cards. ForATM IP cards, the Connmap attributes are set totheir default values. Increasing the value of this at-tribute reduces the memory available for cell andframe memory. This attribute must be set to 0 if theconnectionPoolCapacity attribute of the Arc Cqc Ovcomponent is set to non-zero values. The actualsize of the pool is reflected in the Lp Eng Arc con-nnectionPoolAvailable attribute. If the Logical Pro-cessor is associated with a card of one of the fol-lowing card types: 16pOC3SmIrAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm,1pOC48ChSmIrAtm, the maximum value for opera-tional attribute connectionPoolAvailable is 56000.To achieve the maximum connectionPoolAvailable,

60


the Lp Eng Fcrc Pqc Ov ipRoutesPoolCapacitymust be provisioned to 0. This requires there to beno IP features in the relevant sw lpt featureList. Ifthe total number of connections defined by addingthe values of the protectedConnectionPoolCapacityand the connectionPoolCapacity attributes can notbe satisfied, then the protectedConnectionPoolCa-pacity requirements are satisfied before the require-ments of the connectionPoolCapacity.

Class NA

Presence required

Visibility customer

Range [0..64000]

Data type Decimal

Initial value N.A.

multicastBranchesCapacity

Parameter name multicastBranchesCapacity

Domain

Description This attribute specifies the number of multicastbranches that can be established for all un-sparedAtmIfs on this FP. A multicast branch is used forcell replication on a VCC connection whose VccdistributionType attribute is set to a value of point-ToMultipoint. A branch represents one ATM destin-ation for the replicated cells. Increasing the value ofthis attribute reduces the memory available for thecell and frame memory. This attribute is ignored forthe 1pOC48ChSmIrAtm card as it does not supportmulticast connections. For CQC-based ATM FPs,the maximum value for this attribute is 10752.

Class NA

Presence required

Visibility customer

Range [0..16384]

Data type Decimal

Initial value 0

protectedConnectionPoolCapacity

Parameter name protectedConnectionPoolCapacity

Domain

61


Description This attribute specifies the maximum number ofspared AtmIf connections (VCC, VPC, and VPT)that can be established on this FP. One connectionresource is used for VCC and VPC connections.Three connection resources are used for a VPTconnection. This attribute can only be non-zero ifthe logical Processor is associated with a card ofone of the following card types: 4pOC3SmIrAtm,4pOC3MmAtm, 12pDS3Atm, 12pE3Atm,1pOC12SmLrAtm, 4pOC12SmIrAtm,4pOC12SmLrAtm, 1pOC48ChSmIrAtm,4pDS3ChAtm, or 2pSTM1eCh. If the Logical Pro-cessor is associated with 2pSTM1eCh, the defaultvalue of the attribute is 3072. The default value ofthe attribute is 0 for Logical Processor associatedwith all other card types. If any port on the LogicalProcessor is provisioned in an inter-card LAPS con-figuration, then this attribute must have the samevalue on both associated Logical Processors. Thevalue of the attribute restricts the sum of the(maxVccs + maxVpcs + 3*maxVpts + 1) across allspared AtmIfs bound to this Logical Processor. Themaximum number of supported connections perAPC is 16000 for 16pOC3SmIrAtm,4pOC12SmIrAtm, and 4pOC12SmLrAtm cards. In-creasing the value of this attribute reduces thememory available for cell and frame memory. Theactual size of the pool is reflected in the Lp Eng ArcprotectedConnectionPoolAvailable attribute. If theLogical Processor is associated with a card of oneof the following card types: 16pOC3SmIrAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm,1pOC48ChSmIrAtm, the maximum value for opera-tional attribute protectedConnectionPoolAvailable is56000. To achieve the maximum protectedConnec-tionPoolAvailable, the Lp Eng Fcrc Pqc OvipRoutesPoolCapacity must be provisioned to 0.This requires there to be no IP features in the relev-ant sw lpt featurelist. If the total number of connec-tions defined by adding the values of the protected-ConnectionPoolCapacity and the connectionPool-Capacity attributes can not be satisfied, then theprotectedConnectionPoolCapacity requirements aresatisfied before the requirements of the connection-PoolCapacity.

Class NA

Presence required

Visibility customer

Range [0..64000]

62


Data type Decimal

Initial value N.A.

protectedMcastBranchesCapacity

Parameter name protectedMcastBranchesCapacity

Domain

Description This attribute specifies the number of multicastbranches that can be established for all spared At-mIfs on this FP. A multicast branch is used for cellreplication on a VCC connection whose Vcc distri-butionType attribute is set to a value of pointToMul-tipoint. A branch represents one ATM destinationfor the replicated cells. This attribute can only benon-zero if the Logical Processor is associated witha card of one of the following card types:4pOC3SmIrAtm, 4pOC3MmAtm, 12pDS3Atm,12pE3Atm, or 1pOC12SmLrAtm. If any port on theLogical Processor is provisioned in an inter-cardLAPS configuration, then this attribute must havethe same value on both associated Logical Pro-cessors. Increasing the value of this attribute re-duces the memory available for the cell and framememory.

Class NA

Presence required

Visibility customer

Range [0..16384]

Data type Decimal

Initial value 0

rxCellMemoryAllocation

Parameter name rxCellMemoryAllocation

Domain

Description This attribute specifies the fraction of the receivememory which should be allocated to the receptionof cells on an FP. The remaining receive memory isallocated for the reception of frames. Framememory is used for trunks, ATM VCC testing andfor inter- card communication. Cell memory is usedfor ATM Bearer Service, ATM SVCs and ATMPVCs. There is an absolute minimum quantity offrame buffers which is required by ATM software onthe FP. If the value of this attribute is smaller than

63


the absolute minimum, the ATM software allocatesthe minimum required, rather than the actual num-ber requested. The actual percentage of the receivememory allocated to the receive cell memory is in-dicated by the Arc rxCellMemoryAllocation attribute.A difference between the provisioned and the oper-ational values may exist due to the requirement fora minimum number of frame buffers or roundingduring computation within the FP. This attribute isnot applicable to APC-based, QRD-based andGQM-based FPs. On APC-based, QRD-based andGQM-based FPs, there are dedicated cell memoryand frame memory that are completely separatedfrom one another. On FPs that are not APC-based,QRD-based, or GQM-based, by default this attrib-ute has a value of 20.

Class NA

Presence optional

Visibility customer

Range { [1..99],notApplicable }


Initial value N.A.

txCellMemoryAllocation

Parameter name txCellMemoryAllocation

Domain

Description This attribute specifies the fraction of the transmitmemory which should be allocated to the transmis-sion of cells on an FP. The remaining memory is al-located for the transmission of frames. Framememory is used for trunks, ATM VCC testing andfor inter- card communication. Cell memory is usedfor ATM Bearer Service, ATM SVCs and ATMPVCs. There is an absolute minimum quantity offrame buffers which is required by ATM software onthe FP. If the value of this attribute is smaller thanthe absolute minimum, the ATM software allocatesthe minimum required, rather than the actual num-ber requested. The actual percentage of the trans-mit memory allocated to the transmit cell memory isindicated by the Arc txCellMemoryAllocation attrib-ute. A difference between the provisioned and theoperational values may exist due to the requirementfor a minimum number of frame buffers or roundingduring computation within the FP. This attribute isnot applicable to APC-based, QRD-based and

64


GQM-based FPs. On APC-based, QRD-based andGQM-based FPs, there are dedicated cell memoryand frame memory that are completely separatedfrom one another. On FPs that are not APC-based,QRD-based, or GQM-based, by default this attrib-ute has a value of 50.

Class NA

Presence optional

Visibility customer

Range { [1..99],notApplicable }


Initial value N.A.

65


19 AtmAddress (Addr)






Parents:

EM - AtmIf - Pnni - Addr

Child(ren):

PnniInfo - TermSP -

Identifiers:


MaxIn-stances

rdnId relative primary variable

Links:


Parameters:

rdnId


Domain

Description AtmIf/n Aini Address/address,type AtmIf/n Iisp Ad-dress/address,type AtmIf/n Uni Address/ad-dress,type AtmIf/n Pnni Address/address,type At-mIf/n Vpt/m Aini Address/address,type AtmIf/n Vpt/m Iisp Address/address,type AtmIf/n Vpt/m Uni Ad-dress/address,type AtmIf/n Vpt/m Pnni Address/ad-dress,type This component represents an address(dynamic or static) associated with the interface.The index is a string of 1 to 40 hex digits or a singlewildcard ('?'), and a type. The type identifies wheth-

66


er the Address component is for a primary, altern-ate, registered, or default address. The typesprimary and alternate are used for provisioned ad-dresses. The type registered is used for dynamicaddresses registered through ILMI. The type defaultis used for Soft PVP and Soft PVC ad-dresses.Virtual interfaces do not have addresses oftype default. The wildcard is only valid for provi-sioned addresses. If the address is a single wild-card, then that indicates that the interface supportsall addresses. If there is no better match, then thisinterface may be chosen in the routing. If there ismore than one interface with a single wildcard staticaddress, then the choice is driven through a roundrobin algorithm. The round robin algorithm tries theprimary routes and then the alternate routes if noneof the primary routes succeed. If this node particip-ates in a PNNI hierarchy, then a PnniInfo subcom-ponent can be provisioned under the AtmAddresscomponent to specify the level to which this ad-dress will be advertised.

Class NA

Presence required

Visibility customer

Unit

Range [1..40],[primary, alternate, registered, default]

Data Type AsciiString,Enumeration

Initial Value

67


20 AtmAddressPnniInfo (PnniInfo)






Parents:

EM - AtmIf - Uni - Addr - PnniInfo

EM - AtmIf - Pnni - Addr - PnniInfo

Child(ren):

-

Identifiers:

-

Links:


Parameters:

reachability

Parameter name reachability

Domain

Description This attribute indicates whether the address is in-ternal or exterior. An internal reachable address isan address of a destination that is directly attachedto the logical node advertising the address. An ex-terior reachable address is an address that can bereached through a PNNI routing domain, but whichis not located in that PNNI routing domain.

Class NA

Presence required

Visibility customer

68


Range internal, exterior


Initial value internal

scope

Parameter name scope

Domain

Description This attribute specifies the scope of the ATM ad-dress, which is the highest level up to which this ad-dress will be advertised in the PNNI hierarchy. Thescope must be set to a value numerically less thanor equal to the level of the lowest level peer groupcontaining this node. Setting the scope to 0 willcause the address to be advertised globally withinthis PNNI routing domain.

Class NA

Presence required

Visibility customer

Range [-1..104]

Data type Signed

Initial value -1

69


21 AtmCell (Cell)






Parents:

EM - Lp - Sonet - Sts - Cell

EM - Laps - Sts - Cell

EM - Laps - Vc4 - Cell

EM - Lp - Sdh - Vc4 - Cell

Child(ren):

-

Identifiers:

-

Links:


Parameters:

alarmActDelay

Parameter name alarmActDelay

Domain

Description This attribute specifies the time during which a Lossof Cell Delineation (LCD) defect should be ob-served before declaring an LCD alarm (alarm70115501). When the Cell component is provi-sioned under the Sonet or Sdh component, this at-tribute defaults to 500 milliseconds. When it is pro-visioned under the Laps component, the default is2000 milliseconds. This is necessary to ensure that

70


the services bound to the Sts or Vc4 component arenot disrupted during short lived LCD defects causedby a line switchover. Setting this attribute to a lowervalue when the Laps component is provisioned mayresult in a temporary service outage when a lineswitchover occurs.

Class NA

Presence optional

Visibility customer

Range [0..2000]

Data type Decimal

Initial value N.A.

clearDelay

Parameter name clearDelay

Domain

Description This attribute specifies the minimum elapsed timebetween the clearing of the Loss of Cell Delineation(LCD) defect and the port returning to service. TheLCD defect should be absent for the entire period ofelapsed time. This attribute value is specified inminutes. If the value of the clearDelay attribute isinitially 0 (default), the time is actually about 10seconds. This attribute is supported only on3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm,3pDS3Atm, 3pE3Atm, 3pDS3Atm2, 3pE3Atm2,12pDS3Atm, and 12pE3Atm.

Class NA

Presence required

Visibility customer

Range [0..60]

Data type Decimal

Initial value 0

correctSingleBitHeaderErrors

Parameter name correctSingleBitHeaderErrors

Domain

Description This attribute specifies whether the port correctssingle bit errors detected in the headers of receivedcells. If single bit errors are corrected, the affectedcells are passed up to the ATM layer according to

71


normal operation. If single bit errors are not correc-ted, these errored cells are discarded by the physic-al layer. Note that cells containing multiple bit errorsin their headers are always discarded. Single bitHEC error correction must remain off for the follow-ing card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm,8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.

Class NA

Presence required

Visibility customer

Range off, on


Initial value off

hecErrorIntervalLimit

Parameter name hecErrorIntervalLimit

Domain

Description This attribute counts the instances of the hec-SamplingInterval attribute for all HEC errors(specified by the uncorrectableHeaderError attrib-ute) before an LCD alarm is generated. The alarmis only generated if the value of the uncorrectable-HeaderErrors attribute in a given interval is greaterthan the value of the hecErrorLimit attribute. For ex-ample, if there are 20 HEC errors in 5 seconds, forthree times in a row (the number of times in a row isrepresented by this attribute), an alarm is raised. Ifthere are 24 HEC errors in the 5 seconds, and 14 inthe next 5 seconds no alarm is generated becausethe number of HEC errors should also be more than20 in the next instances. This attribute is supportedonly on 3pDS1Atm, 8pDS1Atm, 3pE1Atm,8pE1Atm, 3pDS3Atm, 3pE3Atm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, and 12pE3Atm.

Class NA

Presence required

Visibility customer

Range [1..25]

Data type Decimal

Initial value 1

hecErrorLimit

72


Parameter name hecErrorLimit

Domain

Description This attribute specifies the error threshold for aHEC error sampling interval beyond which a port isbrought down. When the value of the uncorrectable-HeaderErrors attribute accumulated over the provi-sioned value of the hecSampleInterval attribute isgreater than or equal to the provisioned value of thehecErrorLimit attribute, the sample interval is con-sidered errored. If the number of consecutiveerrored intervals reaches the limit established in thehecErrorIntervalLimit attribute, an LCD alarm is de-clared and the port is disabled. (Please note that ahecErrorInterval attribute value of 0 (default) dis-ables the mechanism of using the value of the un-correctableHeaderErrors attribute to disable a port.)This attribute is supported only on 3pDS1Atm,8pDS1Atm, 3pE1Atm, 8pE1Atm, 3pDS3Atm,3pE3Atm, 3pDS3Atm2, 3pE3Atm2, 12pDS3Atm,and 12pE3Atm.

Class NA

Presence optional

Visibility customer

Range [1..250000]

Data type Decimal

Initial value N.A.

hecSampleInterval

Parameter name hecSampleInterval

Domain

Description This attribute specifies the sampling interval (inseconds) for errors associated with the uncorrect-ableHeaderErrors attribute. When the sum of errorscounted by the uncorrectableHeaderErrors attributeover the interval time is greater than or equal to theprovisioned hecErrorLimit attribute, the sample in-terval is considered errored. If the number of con-secutive errored intervals reaches the limit estab-lished in the hecErrorIntervalLimit attribute, an LCDalarm is declared and the port is disabled. If the at-tribute hecSampleInterval is set to the default, 0,then the attribute uncorrectableHeaderErrors can-not be used to bring down the port. This attribute issupported only on 3pDS1Atm, 8pDS1Atm,3pE1Atm, 8pE1Atm, 3pDS3Atm, 3pE3Atm,

73


3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, and12pE3Atm.

Class NA

Presence required

Visibility customer

Range [0..25]

Data type Decimal

Initial value 0

lcdStateDelay

Parameter name lcdStateDelay

Domain

Description This attribute specifies the time during which an Outof Cell Delineation (OCD) defect should be ob-served before moving to the Loss of Cell Delin-eation (LCD) defect state. The time is specified inmilliseconds. The valid values are 1 to 50 milli-seconds if the AtmCell component is located underthe Ds1 or E1 component, and 1 to 5 milliseconds ifunder a Ds3 or E3 component. This attribute is sup-ported only on 3pDS1Atm, 8pDS1Atm, 3pE1Atm,8pE1Atm, 3pDS3Atm, 3pE3Atm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, and 12pE3Atm.

Class NA

Presence optional

Visibility customer

Range [1..50]

Data type Decimal

Initial value N.A.

scrambleCellPayload

Parameter name scrambleCellPayload

Domain

Description Cell scrambling, as defined by ITU-T Recommenda-tion I.432., can provide a solution to the problem oftransmission equipment which is sensitive to certainbit patterns in the ATM cell payload. This attributecontrols whether or not the cell payload isscrambled. It defaults to off for DS1 interfaces, andon for all other interfaces. Note that this settingmust be the same at both ends of the link.

74


Class NA

Presence optional

Visibility customer

Range off, on


Initial value N.A.

75


22 AtmConLoop (Loop)






Parents:

EM - AtmIf - Vpt - Vcc - Loop

EM - AtmIf - Vcc - Loop

EM - AtmIf - Vpc - Loop

Child(ren):

-

Identifiers:

-

Links:


Parameters:

76


23 AtmConTest (Test)






Parents:

EM - AtmIf - Vpt - Vcc - Test

EM - AtmIf - Vcc - Test

Child(ren):

-

Identifiers:

-

Links:


Parameters:

bandwidthElastic

Parameter name bandwidthElastic

Domain

Description This attribute specifies whether the connection(VCC) should be configured with elastic bandwidthor not. Elastic bandwidth is of importance in con-junction with IMA links, where some links fail andthe resulting bandwidth is less than the requestedbandwidth for all connections. In that case, someconnections may be reduced in bandwidth basedon the setting of the bwElastic attribute. If this attrib-ute is set to yes, the Test application signals to theconnection that the bandwidth for this connection iselastic, and may be reduced in the case of IMA link

77


failures. If the bandwidth is reduced, the rate of testcells which can be handled by the connection willalso be reduced. If this attribute is set to no, theTest application signals to the connection that thebandwidth for this connection must be maintainedat the requested level. If the connection cannotmaintain the full bandwidth, the connection may bereleased (cleared) based on the holding priority ofthe connection.

Class NA

Presence required

Visibility customer

Range no, yes


Initial value no

customizedPattern

Parameter name customizedPattern

Domain

Description This attribute specifies a 32 bit sequence to beused to fill frames when the framePatternType at-tribute is set to customizedPattern. The defaultvalue gives a pattern of alternating 0 and 1 bits.

Class NA

Presence required

Visibility customer

Range [0..7fffffff]

Data type Hex

Initial value 55555555

duration

Parameter name duration

Domain

Description This attribute specifies the maximum number ofminutes that the ATM connection test is allowed torun. The maximum allowed value permits the test tobe run for up to 21 days.

Class NA

Presence required

78


Visibility customer

Range [1..30240]

Data type Decimal

Initial value 1

frmPatternType

Parameter name frmPatternType

Domain

Description This attribute specifies the bit sequence used to fillthe frames used in the ATM connection test. It mustcontain one of the following values:ccitt32kBitPattern: a pseudo-random sequence of32 Kbit is used ccitt8MBitPattern: a pseudo-randomsequence of 8Mbit is used customizedPattern: thepattern defined in the customizedPattern attribute isused

Class NA

Presence required

Visibility customer

Range ccitt32kBitPattern, ccitt8MBitPattern, customized-Pattern


Initial value ccitt32kBitPattern

frmSize

Parameter name frmSize

Domain

Description This attribute defines the size of the test framesused in an ATM connection test.

Class NA

Presence required

Visibility customer

Range [4..4096]

Data type Decimal

Initial value 1024

frmTypes

79


Parameter name frmTypes

Domain

Description This attribute specifies the types of the test framesto be transmitted during the ATM connection test. Itmust contain at least one of the following: loading:A set of "loading frames" is circulated over the linkas rapidly as possible. This frame type should beselected when the test is intended to verify the op-eration of the connection under a specified load.These frames are not checked for bit errors. verific-ation: A single "verification frame" is transmittedover the link; when the frame is returned, its con-tents are verified and the next verification frame inthe series is transmitted. This frame type should beselected when the test is intended to verify thatframes are not being corrupted as they pass overthe connection.

Class NA

Presence required

Visibility customer

Range loading, verification

Data type Set of

Initial value loading,verification

overrideHoldingPriority

Parameter name overrideHoldingPriority

Domain

Description This attribute specifies the override holding prioritywhich should be signaled to the VCC connection atthe start of the test. Holding priority is of importancein conjunction with IMA links, where some links failand the resulting bandwidth is less than the reques-ted bandwidth for all connections. In that case,some connections may be released based on theconnection's holding priority. Zero (0) is the highestholding priority, and four (4) is the lowest priority. Asetting of zero to four overrides whatever holdingpriority that has been configured at the connection(VCC). A setting of noOverride means that the con-nection should use its internally configured holdingpriority.

Class NA

Presence required

Visibility customer

80


Range 0, 1, 2, 3, 4, noOverride


Initial value noOverride

81


24 AtmConfiguredNode (CfgNode)






Parents:

EM - ARtg - Pnni - CfgNode

Child(ren):

Pgl - SAddr -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description ARtg Pnni ConfiguredNode/<level> This componentspecifies the participation of this node at the level inthe PNNI hierarchy indicated by the level.

Class NA

Presence required

Visibility customer

Unit

Range [0..104]

82


Data Type Decimal

Initial Value

avcrMt

Parameter name avcrMt

Domain

Description This attribute multiplied by the Maximum Cell Ratespecifies the minimum threshold used in the al-gorithms that determine significant change for aver-age cell rate parameters. This value is used for lo-gical links only. For physical links, the value in ARtgPnni avcrMt is used. If the value of this attribute issameAsPnni, then the actual value is taken fromARtg Pnni avcrMt.

Class NA

Presence required

Visibility customer

Range { [1..99],sameAsPnni }


Initial value sameAsPnni

avcrPm

Parameter name avcrPm

Domain

Description This attribute multiplied by the current Available CellRate specifies the threshold used in the algorithmsthat determine significant change for AvCR para-meters. This value is used for logical links only. Forphysical links, the value in ARtg Pnni avcrPm isused. If the resulting threshold is lower than theminimum threshold, the minimum threshold is used.Increasing the value of the attribute increases therange of insignificance and reduces the amount ofPTSP flooding due to changes in resource availabil-ity. If the value of this attribute is sameAsPnni, thenthe actual value is taken from ARtg Pnni avcrPm.

Class NA

Presence required

Visibility customer



83



cdvPm

Parameter name cdvPm

Domain

Description This attribute specifies the proportional multiplierused in the algorithms that determine significantchange for CDV metrics. Increasing the value of theattribute increases the range of insignificance andreduces the amount of PTSP flooding due tochanges in resource availability. If the value of thisattribute is sameAsPnni, then the actual value istaken from ARtg Pnni cdvPm.

Class NA

Presence required

Visibility customer




ctdPm

Parameter name ctdPm

Domain

Description This attribute specifies the proportional multiplierused in the algorithms that determine significantchange for CTD metrics. Increasing the value of theattribute increases the range of insignificance andreduces the amount of PTSP flooding due tochanges in resource availability. If the value of thisattribute is sameAsPnni, then the actual value istaken from ARtg Pnni ctdPm.

Class NA

Presence required

Visibility customer




helloHoldDown

84


Parameter name helloHoldDown

Domain

Description This attribute specifies the rate at which this nodesends out Hello packets. It specifies the defaultminimum length of time between successive Hellosused by routing control channels on this node atthis level. This value cannot be greater than hel-loInterval. If the value of this attribute issameAsPnni, then the actual value is taken fromARtg Pnni helloHoldDown.

Class NA

Presence required

Visibility customer

Range { [0.1..65535.0],sameAsPnni }



helloInactivityFactor

Parameter name helloInactivityFactor

Domain

Description This attribute specifies the number of Hello intervalsallowed to pass without receiving a Hello from aneighbor, before an attempt is made to re-stage theRCC to that neighbor. The hello inactivity timer isenabled when the helloState is one of oneWayIn-side, twoWayInside, oneWayOutside, twoWayOut-side or commonOutside. If the value of this attributeis sameAsPnni, then the actual value is taken fromARtg Pnni helloInactivityFactor.

Class NA

Presence required

Visibility customer




helloInterval

Parameter name helloInterval

Domain

Description This attribute specifies the default duration of the

85


Hello Timer for routing control channels on thisnode. Every helloInterval seconds, this node sendsout a Hello packet to the neighbor node, subject tothe helloHoldDown timer having expired at leastonce since the last Hello packet was sent. Thisvalue cannot be less than helloHoldDown. If thevalue of this attribute is sameAsPnni, then the actu-al value is taken from ARtg Pnni helloInterval.

Class NA

Presence required

Visibility customer




horizontalLinkInactivityTime

Parameter name horizontalLinkInactivityTime

Domain

Description This attribute specifies the length of time a nodecontinues to advertise a horizontal (logical) link forwhich it has not received and processed an LGNHorizontal Link Information Group. If the value ofthis attribute is sameAsPnni, then the actual valueis taken from ARtg Pnni horizontalLinkInactivity-Time.

Class NA

Presence required

Visibility customer




nodeId

Parameter name nodeId

Domain

Description This attribute allows explicit specification of a nodeID for this configured node. If a value is assigned inthis attribute, it overrides any system computednode ID for this configured node. If this attribute isempty, then the node ID is computed by the systemin opNodeId.

86


Class NA

Presence required

Visibility customer

Range [0..44]

Data type HexString

Initial value

peerDelayedAckInterval

Parameter name peerDelayedAckInterval

Domain

Description This attribute specifies the minimum length of timebetween transmissions of delayed PTSE acknow-ledgment packets. If the value of this attribute issameAsPnni, then the actual value is taken fromARtg Pnni peerDelayedAckInterval.

Class NA

Presence required

Visibility customer




peerGroupId

Parameter name peerGroupId

Domain

Description This attribute allows explicit specification of the peergroup ID of the Logical Group Node (LGN). Thepeer group ID is specified by 14 octets where thefirst octet specifies the level of the node and the re-maining 13 octets form the identifier information.The value in the identifier information field must beencoded with the 104-n right-most bits set to zero,where n is the level. If this value is set to null, thenthe peer group ID is computed by the system anddisplayed under attribute opPeerGroupId.

Class NA

Presence required

Visibility customer

Range [0..28]

87


Data type HexString

Initial value

ptseHoldDown

Parameter name ptseHoldDown

Domain

Description This attribute is used to limit the rate at which thisnode sends out PTSE packets. It specifies the min-imum length of time that this node must waitbetween sending successive PTSE packets. Thevalue of this attribute is constraint by the equation:ptseHoldDown * 2 < ptseRefreshInterval * ptseLife-timeFactor. If the value of this attribute issameAsPnni, then the actual value is taken fromARtg Pnni ptseHoldDown.

Class NA

Presence required

Visibility customer




ptseLifetimeFactor

Parameter name ptseLifetimeFactor

Domain

Description This attribute specifies the PTSE lifetime multiplier.The result of multiplying the ptseRefreshInterval bythis value is used as the initial lifetime that this nodeplaces into PTSEs. The value of this attribute isconstraint by the equation: ptseHoldDown * 2 <ptseRefreshInterval * ptseLifetimeFactor. If thevalue of this attribute is sameAsPnni, then the actu-al value is taken from ARtg Pnni ptseLifetimeFactor.

Class NA

Presence required

Visibility customer




88


ptseRefreshInterval

Parameter name ptseRefreshInterval

Domain

Description This attribute specifies the duration of the PTSETimer. Every ptseRefreshInterval seconds, thisnode sends out a self-originated PTSE packet tothe neighbor node, subject to the ptseHoldDowntimer having expired at least once since the lastPTSE packet was sent. The value of this attribute isconstraint by the equation: ptseHoldDown * 2 <ptseRefreshInterval * ptseLifetimeFactor. If thevalue of this attribute is sameAsPnni, then the actu-al value is taken from ARtg Pnni ptseRefreshInter-val.

Class NA

Presence required

Visibility customer




requestRxmtInterval

Parameter name requestRxmtInterval

Domain

Description This attribute specifies the period between retrans-missions of unacknowledged Database Summarypackets, PTSE Request packets and PTSPs. If thevalue of this attribute is sameAsPnni, then the actu-al value is taken from ARtg Pnni requestRxmtInter-val.

Class NA

Presence required

Visibility customer




restrictTransit

Parameter name restrictTransit

89


Domain

Description This attribute specifies whether the configurednodeshould restrict tandeming of SVCs. If this attribute isset to true, then other nodes in the PNNI hierarchyavoids traversing this node during route computa-tion.

Class NA

Presence required

Visibility customer

Range false, true


Initial value false

svccCalledIntegrityTime

Parameter name svccCalledIntegrityTime

Domain

Description This attribute specifies the length of time this nodewaits for an SVCC to become fully established be-fore giving up and tearing it down. This conditionoccurs when the node has decided to accept theSVCC setup as the called party. If the value of thisattribute is sameAsPnni, then the actual value istaken from ARtg Pnni svccCalledIntegrityTime.

Class NA

Presence required

Visibility customer




svccCallingIntegrityTime

Parameter name svccCallingIntegrityTime

Domain

Description This attribute specifies the length of time this nodewaits for an SVCC to become fully established be-fore giving up and tearing it down. The condition oc-curs when the node initiates establishment of theSVCC as the calling party. If the value of this attrib-ute is sameAsPnni, then the actual value is takenfrom ARtg Pnni svccCallingIntegrityTime.

90


Class NA

Presence required

Visibility customer




svccEstablishIntegrityTime

Parameter name svccEstablishIntegrityTime

Domain

Description This attribute specifies the length of time this nodewaits for an SVCC SETUP message from its neigh-bor once the node knows the existence of theneighbor. An alarm is raised when the timer ex-pires. If the value of this attribute is sameAsPnni,then the actual value is taken from ARtg Pnni svc-cEstablishIntegrityTime.

Class NA

Presence required

Visibility customer




svccInitTime

Parameter name svccInitTime

Domain

Description This attribute specifies the length of time this nodedelays initiating establishment of an SVCC to aneighbor after determining that such an SVCCshould be established. If the value of this attribute issameAsPnni, then the actual value is taken fromARtg Pnni svccInitTime.

Class NA

Presence required

Visibility customer




91


svccRetryTime

Parameter name svccRetryTime

Domain

Description This attribute specifies the length of time this nodedelays before attempting to re-establish the SVCC-base RCC. This condition occurs when an RCCcannot be established, either during the initialsetup, or is unexpectedly torn down. If the value ofthis attribute is sameAsPnni, then the actual valueis taken from ARtg Pnni svccRetryTime.

Class NA

Presence required

Visibility customer




92


25 AtmConnectionAdministrator (CA)





Parents:

EM - AtmIf - CA

Child(ren):

Cbr - NrtVbr - RtVbr - Ubr -

Identifiers:

-

Links:


Parameters:

bandwidthPool

Parameter name bandwidthPool

Domain

Description Link capacity is partitioned into five bandwidthpools. This attribute specifies the percentage of linkbandwidth that is allowed for each pool. The per-centage for each pool ranges from 0% to 12,800%.This allows for both under and over subscription ofthe link. Under subscription occurs when the sum ofthe percentages assigned to the five pools is lessthan 100%. Over subscription occurs when the sumof the percentages for the five pools exceeds 100%.

Class NA

Presence required

Visibility customer

Range [0..12800]

93




maxAutoSelectedVciForNonZeroVpi

Parameter name maxAutoSelectedVciForNonZeroVpi

Domain

Description This attribute specifies the maximum VCI valuewhich is automatically allocated for a switched Vccwith a non-zero VPI value. A VCI number is auto-matically allocated when a switched Vcc does notrequest a specific VCI number. This value also ap-plies to switched VCCs created beneath a Vpt com-ponent.

Class NA

Presence required

Visibility customer

Range [5..65535]

Data type Decimal

Initial value 63

maxAutoSelectedVciForVpiZero

Parameter name maxAutoSelectedVciForVpiZero

Domain

Description This attribute specifies the maximum VCI valuewhich is automatically allocated for a switched Vccwith VPI value of zero. A VCI number is automatic-ally allocated when a switched Vcc does not re-quest a specific VCI number. This value also ap-plies to switched VCCs created beneath Vpt/0.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 767

maxAutoSelectedVpi

Parameter name maxAutoSelectedVpi

94


Domain

Description This attribute specifies the maximumVPI valuewhich will be automatically allocated for a switchedVpc or Vcc. A VPI number is automatically allocatedwhen a switched Vpc or Vcc does not request aspecific VPI number.

Class NA

Presence required

Visibility customer

Range [1..4095]

Data type Decimal

Initial value 128

maxVccs

Parameter name maxVccs

Domain

Description This attribute specifies the maximum number ofVCCs (and Vpt VCCs) that can be activated on thisAtmIf component. For 3pE3Atm, 3pDS3Atm,3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm,3pDS1Atm, and 2pJ6MAtm cards, the value of thisattribute must not exceed the number of Vcc identi-fiers in the Vcc space supported by this AtmIf com-ponent (which is specified by the AtmIf Connection-Mapping component). For cards other than3pE3Atm, 3pDS3Atm, 3pOC3MmAtm,3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, and2pJ6MAtm, the sum of (maxVccs + maxVpcs +(maxVpts * 3) + 1) across all spared AtmIfs linked toan Lp must not exceed the value of the protected-ConnectionPoolCapacity attribute of the Lp Eng ArcOv component. The sum of (maxVccs + maxVpcs +(maxVpts * 3) + 1) across all unspared AtmIfs linkedto an Lp must not exceed the value of the connec-tionPoolCapacity attribute of the Lp Eng Arc Ovcomponent. Note that 3 connections are used forevery standard Vpt component and 2 for each basicVpt component. If the Lp Eng Arc Ov component isnot provisioned, the default values of the connec-tionPoolCapacity and protectedConnectionPoolCa-pacity attributes are used as the limit. A value ofautoConfigure means an appropriate value is selec-ted based on the card type. For 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch and MSA32cards, the value is 100. For 4pOC12SmIrAtm,4pOC12SmLrAtm, 16pOC3SmIrAtm,

95


16pOC3PosAtm, and 4pMRPosAtm cards, thevalue is 127. For all other cards, the value is 255.

Class NA

Presence required

Visibility customer

Range { [0..16384],autoConfigure }


Initial value autoConfigure

maxVpcs

Parameter name maxVpcs

Domain

Description This attribute specifies the maximum number ofVPC components that can be activated on this At-mIf component. For cards other than 3pE3Atm,3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm,3pE1Atm, 3pDS1Atm, and 2pJ6MAtm, the sum of(maxVccs + maxVpcs + (maxVpts * 3) + 1) acrossall spared AtmIfs linked to an Lp must not exceedthe value of the protectedConnectionPoolCapacityattribute of the Lp Eng Arc Ov component. The sumof (maxVccs + maxVpcs + (maxVpts * 3) + 1)across all unspared AtmIfs linked to an Lp must notexceed the value of the connectionPoolCapacity at-tribute of the Lp Eng Arc Ov component. Note that 3connections are used for every standard Vpt com-ponent and 2 for each basic Vpt component. If theLp Eng Arc Ov component is not provisioned, thedefault values of the connectionPoolCapacity andprotectedConnectionPoolCapacity attributes areused as the limit. A value of autoConfigure meansan appropriate value is selected based on the cardtype. For 2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch,4pOC3Ch, 4pOC12SmIrAtm, 4pOC12SmLrAtm,16pOC3SmIrAtm, 16pOC3PosAtm, 4pMRPosAtm,and MSA32 cards, the value is 16. For all othercards, the value is 128.

Class NA

Presence required

Visibility customer




96


maxVpts

Parameter name maxVpts

Domain

Description This attribute specifies the maximum number of Vptcomponents that can be activated on this AtmIfcomponent. For cards other than 3pE3Atm,3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm,3pE1Atm, 3pDS1Atm, and 2pJ6MAtm, the sum of(maxVccs + maxVpcs + (maxVpts * 3) + 1) acrossall spared AtmIfs linked to an Lp must not exceedthe value of the protectedConnectionPoolCapacityattribute of the Lp Eng Arc Ov component. The sumof (maxVccs + maxVpcs + (maxVpts * 3) + 1)across all unspared AtmIfs linked to an Lp must notexceed the value of the connectionPoolCapacity at-tribute of the Lp Eng Arc Ov component. Note that 3connections are used for every standard Vpt com-ponent and 2 for each basic Vpt component. If theLp Eng Arc Ov component is not provisioned, thedefault values of the connectionPoolCapacity andprotectedConnectionPoolCapacity attributes areused as the limit. A value of autoConfigure meansan appropriate value is selected based on the cardtype. For 2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch,4pOC3Ch, 4pOC12SmIrAtm, 4pOC12SmLrAtm,16pOC3SmIrAtm, 16pOC3PosAtm, 4pMRPosAtm,and MSA32 cards, the value is 16. For all othercards, the value is 128.

Class NA

Presence required

Visibility customer




minAutoSelectedVciForNonZeroVpi

Parameter name minAutoSelectedVciForNonZeroVpi

Domain

Description This attribute specifies the minimum VCI valuewhich is automatically allocated for a switched Vccwith a non-zero VPI value. A VCI number is auto-matically allocated when a switched Vcc does notrequest a specific VCI number. This value also ap-plies to switched VCCs created beneath a Vpt com-

97


ponent.

Class NA

Presence required

Visibility customer

Range [5..65535]

Data type Decimal

Initial value 32

minAutoSelectedVciForVpiZero

Parameter name minAutoSelectedVciForVpiZero

Domain

Description This attribute specifies the minimum VCI valuewhich is automatically allocated for a switched Vccwith VPI value of zero. A VCI number is automatic-ally allocated when a switched Vcc does not re-quest a specific VCI number. This value also ap-plies to switched VCCs created beneath Vpt/0.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 32

minAutoSelectedVpi

Parameter name minAutoSelectedVpi

Domain

Description This attribute specifies the minimum VPI valuewhich will be automatically allocated for a switchedVpc or Vcc component. A VPI number is automatic-ally allocated when a switched Vpc or Vcc compon-ent does not request a specific VPI number.

Class NA

Presence required

Visibility customer

Range [1..4095]

Data type Decimal

Initial value 1

98


minMulticastBranches

Parameter name minMulticastBranches

Domain

Description This attribute specifies the guaranteed number ofswitched multicast branches that can be activatedon this AtmIf component, including those activatedbeneath a Vpt component. For all spared AtmIfslinked to an Lp, the number of minMulticast-Branches plus the number of branches consumedby all Msrcs plus the number of provisionedbranches listed in the nextHop attribute of all Mnrpsmust not exceed the value of the protectedMcst-BranchesCapacity attribute of the Lp Eng Arc Ovcomponent. For all unspared AtmIfs linked to an Lp,the number of minMulticastBranches plus the num-ber of branches consumed by all Msrcs plus thenumber of provisioned branches listed in thenextHop attribute of all Mnrps must not exceed thevalue of the multicastBranchesCapacity attribute ofthe Lp Eng Arc Ov component. If the value of theminMulticastBranches attribute is non zero, the LpEng Arc Ov component must exist and have a mul-ticastBranchesCapacity attribute, or the protected-McstBranchesCapacity attribute set to a valuegreater than or equal to the minMulticastBranchesattribute. For 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, and 2pJ6MAtm cards, thevalue of the attribute can not exceed 10752.

Class NA

Presence required

Visibility customer

Range [0..16384]

Data type Decimal

Initial value 0

permittedAtmServiceCategories

Parameter name permittedAtmServiceCategories

Domain

Description This attribute specifies which ATM service categor-ies are permitted on this interface for SVPs andSVCs. The value of this attribute does not affectcontrol VCCs, such as signaling and ILMI channels.If the value is empty, no non-control SVPs, or SVCs

99


will use this interface. This attribute is ignored forthe admission of provisioned VCCs, VPCs, VPTs,S-PVCs, and S-PVPs. The value of the permitte-dAtmServiceCategories attribute in a Vpt CA over-rides this attribute value for all the SVCs under theVpt component.

Class NA

Presence required

Visibility customer

Range unspecifiedBitRate, constantBitRate, rtVariable-BitRate, nrtVariableBitRate, ubr, cbr, rtvbr, nrtvbr

Data type Set of

Initial value unspecified-BitRate,constantBitRate,rtVariableBitRate,nrtVariableBitRate

100


26 AtmConnectionMapping (ConnMap)






Parents:

EM - AtmIf - ConnMap

Child(ren):

Ov -

Identifiers:

-

Links:


Parameters:

101


27 AtmConnectionMappingOverride (Ov)





Parents:

EM - AtmIf - ConnMap - Ov

Child(ren):

-

Identifiers:

-

Links:


Parameters:

firstNonZeroVpiForVccs

Parameter name firstNonZeroVpiForVccs

Domain

Description This attribute specifies the initial VPI of the optionalProgrammable VCC Space. If the value of the num-NonZeroVpisForVccs attribute is 0, then the Pro-grammable VCC Space does not exist and thevalue of this attribute is ignored. If the value of thenumNonZeroVpisForVccs attribute is greater than0, then the Programmable VCC Space exists andcovers the VPI values ranging from firstNonZer-oVpiForVccs to (firstNonZeroVpiForVccs + num-NonZeroVpisForVccs - 1). This range must be with-in the range defined by minAutoSelectedVpi attrib-ute value and the maxAutoSelectedVpi attributevalue under AtmIf CA component. For card types3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDs1Atm, and 2pJ6MAtm,

102


the maximum value of this attribute is 240. For cardtypes 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm, the maximum value of this attrib-ute is 255 for UNI applications and 4095 for NNI ap-plications. The values of all attributes provisioned inthis group must adhere to the guidelines laid downin the description of the Provisioned group.

Class NA

Presence required

Visibility customer

Range [1..4095]

Data type Decimal

Initial value 1

numNonZeroVpisForVccs

Parameter name numNonZeroVpisForVccs

Domain

Description This attribute specifies the number of contiguousVPIs supported in the optional Programmable VCCSpace. If the value of the numNonZeroVpisForVccsattribute is 0, then the Programmable VCC Spacedoes not exist. If the value of the numNonZeroVpis-ForVccs attribute is greater than 0, then the Pro-grammable VCC Space exists and covers the VPIvalues ranging from firstNonZeroVpiForVccs to(firstNonZeroVpiForVccs + numNonZeroVpisFor-Vccs - 1). For card types 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDs1Atm, and 2pJ6MAtm, the maximum value ofthis attribute is 255. For card types4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm, the maximum value of this attrib-ute is 255 for UNI applications and 4095 for NNI ap-plications. The values of all attributes provisioned inthis group must adhere to the guidelines laid downin the description of the Provisioned group.

Class NA

Presence required

Visibility customer

Range [0..4095]

Data type Decimal

Initial value 0

103


numVccsForVpiZero

Parameter name numVccsForVpiZero

Domain

Description This attribute specifies the number of VCCs suppor-ted for the VPI Zero VCC Space. The VCI values ofthese VCCs range from 0 to (numVccsForVpiZero -1). A value of autoConfigure means an appropriatevalue is selected based on the card type. For cardtypes 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDs1Atm, and 2pJ6MAtm,the default value of this attribute is 768 and themaximum value is 16128. For card types4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm, the default value of this attributeis 1024 and the maximum value is 16384. The val-ues of all attributes provisioned in this group mustadhere to the guidelines laid down in the descriptionof the Provisioned group.

Class NA

Presence required

Visibility customer




numVccsPerNonZeroVpi

Parameter name numVccsPerNonZeroVpi

Domain

Description This attribute specifies the number of VCCs suppor-ted for each VPI in the Programmable VCC Space.The VCI values of these VCCs range from 0 to(numVccsPerNonZeroVpi - 1) for each VPI in thisspace. For card types 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDs1Atm, and 2pJ6MAtm, the maximum value ofthis attribute is 2048. For card types4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm, the maximum value of this attrib-ute is 16384. The values of all attributes provi-sioned in this group must adhere to the guidelineslaid down in the description of the Provisionedgroup.

Class NA

104


Presence required

Visibility customer

Range 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048,4096, 8192, 16384


Initial value 64

105


28 AtmConstantBitRate (Cbr)





• Verbs: add,

Parents:

EM - AtmIf - CA - Cbr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n CA ConstantBitRate/n This componentmanages the default characteristics of the constantbit rate (CBR) service category.

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

106


Data Type Decimal

Initial Value

cdv

Parameter name cdv

Domain

Description This attribute specifies the peak-to-peak cell delayvariation (CDV) which is contributed to the entireATM Interface for CBR traffic (excluding connec-tions managed by a Vpt CA). The CDV is a meas-ure of the delay jitter introduced mostly by trafficbuffering and cell scheduling. The worst case valueof this attribute can be computed as the value of thetxQueueLimit attribute divided by the link rate of thisATM Interface. This attribute is used by PNNI in theResource Availability Information Group (RAIG) to-pology updates and route selection. It is also usedby CAC at connection set-up time to determinewhether this ATM Interface can meet the CDV re-quirement for that connection. If so, the value of thisattribute is added to the cumulative CDV field of theextended QoS information element.

Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Decimal

Initial value 250

cdvt

Parameter name cdvt

Domain

Description This attribute specifies the default cell delay vari-ation tolerance (CDVT) for all connections of theCBR service category (excluding connections man-aged by a Vpt CA). An override to this default maybe specified for a provisioned connection under theVcd Tm or Vpd Tm component. This attribute isused by the Connection Admission Control (CAC)algorithm to compute the equivalent cell rate (ECR)required by a given CBR connection. The larger thevalue of CDVT, the larger is its ECR. If Usage Para-meter Control (UPC) is enabled for a connection,

107


CDVT is used by the UPC function to decide wheth-er a cell is conforming or non-conforming based onthe connection's traffic descriptor type. The largerthe CDVT value, the more tolerant is the UPC ofbandwidth usage beyond the traffic contract.

Class NA

Presence required

Visibility customer

Range [1..10000]

Data type Decimal

Initial value 250

cellLossRatio

Parameter name cellLossRatio

Domain

Description This attribute specifies the tolerable cell loss ratio(CLR) for CBR traffic (excluding connections man-aged by a Vpt CA). The value specified is the neg-ative base 10 logarithm of the CLR. For example, ifthe target CLR = 1E-10 then the value of thecellLossRatio attribute is 10. The value of this attrib-ute must be the same as the value of the RtVbrcellLossRatio attribute since CBR and rt-VBR traffichave the same discard priority. This attribute isused by the Connection Admission Control (CAC)algorithm to compute the equivalent cell rate (ECR)required for CBR connections. There is a trade-offbetween the service category CLR and the achiev-able link utilization. To guarantee an excellent ser-vice category, the CLR should be as small as pos-sible (for example, 1E- 10). However, a smallerCLR results in a larger equivalent cell rate for a giv-en connection and hence a lower link utilization. Avalue of anyClrValue means that no bandwidth isreserved for CBR connections, and CAC is effect-ively turned off. All CBR connections are admitted.

Class NA

Presence required

Visibility customer

Range { [1..15],anyClrValue }


Initial value 10

108


emissionPriority

Parameter name emissionPriority

Domain

Description This attribute specifies the emission priority (EP)which is used to transmit traffic of the CBR servicecategory. A lower numerical value for this attributespecifies a higher emission priority. 0 is the highestEP and 7 is the lowest. Cells at a higher emissionpriority receive higher preference for link bandwidth.EP 0 and EP 1 are in the absolute priority rangeand are unaffected by any minimum bandwidthguarantees. EP 2 through EP 7 are in the guaran-teed bandwidth range and may achieve a prioritywhich is different from the strict hierarchical priority,if a minimum bandwidth guarantee is provisioned. Aminimum bandwidth guarantee is specified in theAtmIf/n Ep/m component. This attribute does notapply to basic VPTs, or standard Vpt VCCs. This at-tribute is not applicable and is ignored for3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, and 1pOC12SmLrAtm cards, emission pri-ority setting must comply with all of the followingconstraints: 1. The emission priority numbers mustbe in the following order: CBR <= rt-VBR <= nrt-VBR <= ABR <= UBR 2. Two different ATM servicecategories may share the same EP only if they areboth shaped. 3. CBR and rt-VBR may be placedeither in the absolute priority range (EP 0 or 1) or inthe guaranteed bandwidth range (EP 2 through 7).4. If both CBR and rt-VBR are shaped, rt-VBR mustshare the same EP with CBR or ABR. If either oneof CBR or rt-VBR are not shaped, then they cannotshare the same EP. 5. ABR service category is al-ways deemed to be shaped. If nrt-VBR is shaped, itmust share the same EP with ABR. If nrt-VBR is notshaped it must have a higher EP than ABR. 6. IfUBR is shaped, it must share the same EP withABR. If UBR is not shaped, it must have a lower EPthan ABR. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards, emission priority set-ting must comply with all of the following con-straints: 1. The emission priority numbers must bein the following order: CBR <= rt-VBR <= nrt-VBR

109


<= UBR 2. Two different ATM service categoriesmay share the same EP only if they are bothshaped. 3. EP 0 must be used if traffic shaping isrequired. 4. EP 5 and EP 6 are not supported. For16pOC3PosAtm and 4pMRPosAtm cards, emissionpriority setting must comply with all of the followingconstraints: 1. The emission priority numbers mustbe in the following order: CBR <= rt-VBR <= nrt-VBR <= UBR 2. Two different ATM service categor-ies may share the same EP only if they are bothshaped. For 1pOC48ChSmIrAtm cards, only the de-fault value is supported.

Class NA

Presence optional

Visibility customer

Range [0..7]

Data type Decimal

Initial value 0

forceTagging

Parameter name forceTagging

Domain

Description This attribute specifies the default force tagging(CLP=1) value of all cells for CBR permanent con-nections. An override to this default may be spe-cified for a provisioned connection under the VcdTm or Vpd Tm component. A value of enabledmeans CLP is set to 1 for all cells. A value of dis-abled means CLP is unchanged for all cells. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, force tagging applies tocells in the receive direction. For all other cards,force tagging applies to cells in the transmit direc-tion. This attribute does not apply to any type of Vptcomponent. This attribute does not apply toswitched CBR connections. This attribute is not ap-plicable and is ignored for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm, and1pOC48ChSmIrAtm cards.

Class NA

Presence required

Visibility customer


110



Initial value disabled

holdingPriority

Parameter name holdingPriority

Domain

Description This attribute specifies the default holding prioritywhich applies to SVP and SVC CBR connections. Ittakes a value from 0 (highest priority) to 4 (lowestpriority). In a situation where the link bandwidth fluc-tuates, such as over an IMA link, holding priority isused to determine which connections are held andwhich are released. Holding priority 4 connectionsare the first to be released. Holding priority 0 con-nections are the last to be released. This attributedoes not apply to Vpt VCCs. When bandwidth fluc-tuates, the entire Vpt component, along with all VptVCCs is released as a unit, according to the Vpt'sholdingPriority.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 3

maxCtd

Parameter name maxCtd

Domain

Description This attribute specifies the maximum cell transferdelay (MaxCTD) which is applied to the entire ATMInterface for CBR traffic (excluding connectionsmanaged by a Vpt CA). MaxCTD is the sum of thefixed delay and the CDV. The components of thefixed delay include propagation delay through thephysical media, delays induced by the transmissionsystem and fixed components of switch processingdelay. This attribute is used by PNNI in the Re-source Availability Information Group (RAIG) topo-logy updates and route selection. It is also used byCAC at connection set-up time to determine wheth-er this ATM Interface can meet the ATM connec-tion's MaxCTD requirement.

111


Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Decimal

Initial value 1000

minPerVcQueueLimit

Parameter name minPerVcQueueLimit

Domain

Description This attribute specifies the minimum queue limit forthe per-VC queues of connections of the CBR ser-vice category. This attribute is ignored for3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, and 1pOC12SmLrAtm,cards, because they do not support per-VC queuesfor the CBR service category. The queue limit of aper-VC queue is obtained by scaling down thetxQueueLimit attribute based on the shaping rate ofthat queue (shaping rate for the connection and forstandard Vpt VCCs, the shaping rate of the Vptcomponent). This produces a constant delay forvarious queue lengths. The value of thetxQueueLimit attribute provides an upper boundwhile the value of the minPerVcQueueLimit attributeprovides the lower bound. The value of this attributemust not be greater than the value of thetxQueueLimit attribute. If this service category isused by Trunks, the value of the minPerVc-QueueLimit attribute must be at least 88. For VPTs,this attribute does not apply. Regardless of theVpt's service category, standard VPTs always usethe AtmIf CA NrtVbr minPerVcQueueLimit value astheir default. To determine the queue limit of astandard Vpt Vcc, the txQueueLimit attribute isscaled down by the Vpt shaping rate. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, and 1pOC48ChSmIrAtm cards, the validrange for this attribute is from 5 to 63488 inclusive.For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, the valid range for this at-tribute is from 36 to 512000 inclusive. For

112


16pOC3PosAtm cards, the valid range for this at-tribute is from 32 to 261120 inclusive. For4pMRPosAtm cards, the valid range for this attrib-ute is from 32 to 1011840 inclusive.

Class NA

Presence required

Visibility customer

Range [5..1011840]

Data type Decimal

Initial value 88

perVcQueueLimitReferenceRate

Parameter name perVcQueueLimitReferenceRate

Domain

Description This attribute specifies the shaping rate to be usedin computing the tolerable delay for per-VC queuesof connections of the CBR service category. Thedelay is computed as the txQueueLimit divided bythe value of this attribute. This attribute is ignoredfor 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, 1pOC12SmLrAtm, and1pOC48ChSmIrAtm cards, because they do notsupport traffic shaping for the CBR service cat-egory. A value of autoConfigure means an appropri-ate value is selected based on the card type. For3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,4pOC3MmAtm, 4pOC3SmIrAtm, 16pOC3SmIrAtm,and 16pOC3PosAtm cards the value is 65511. For2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Chand 4pDS3ChAtm cards, the value is 3685. ForMSA32 cards, the value is 65511 for OC-3 chan-nels, and 3685 for DS1, or E1 channels. For4pOC12SmIrAtm, and 4pOC12SmLrAtm cards, thevalue is 262044. For 4pMRPosAtm cards, the valueis 262044 for OC-12 ports and 1048176 for OC-48ports. For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards the maximum value is1416905. For 16pOC3PosAtm cards, the maximumvalue is 353207. For 4pMRPosAtm cards, the max-imum value is 1412830 for OC-12 ports and5651320 for OC- 48 ports. For all other cards, themaximum value is 943396. For VPTs, this attributedoes not apply. Regardless of the Vpt's service cat-egory, standard VPTs always use the AtmIf CA

113


NrtVbr perVcQueueLimitReferenceRate attributevalue as their default.

Class NA

Presence required

Visibility customer




pool

Parameter name pool

Domain

Description This attribute specifies the bandwidth pool which isto be used to support the constant bit rate (CBR)service category (excluding connections managedby a Vpt CA). The percentage of link capacity re-served for the given bandwidth pool is the maxim-um bandwidth that can be allocated to CBR traffic.The percentage allocated to each bandwidth poolcan be provisioned through the bandwidthPool at-tribute of the CA component.

Class NA

Presence required

Visibility customer

Range pool1, pool2, pool3, pool4, pool5


Initial value pool1

rxCellDiscardThreshold

Parameter name rxCellDiscardThreshold

Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming cells for CBR servicecategory. If the count of discarded incoming CBRcells is greater than the provisioned value of this at-tribute in a 15 minute interval, the alarm is set.While the alarm is set, if the count of discarded in-coming CBR cells is still greater than the provi-sioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded incoming CBR cells drops below

114


the provisioned value of this attribute in a 15 minuteinterval the alarm is cleared. Provisioned value of '0'means discarded incoming CBR cells are not mon-itored and no alarm is generated. While the alarm isset, if the value of this attribute is changed, thealarm is cleared. This attribute is not applicable for3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm and 2pJ6MAtm cards. This attribute isnot applicable for 4pOC12SmIrAtm and4pOC12SmLrAtm cards when channelized.

Class NA

Presence required

Visibility customer

Range [0..4294967295]

Data type LongInteger

Initial value 0

rxFrameDiscardThreshold

Parameter name rxFrameDiscardThreshold

Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming frames for CBR ser-vice category. If the count of discarded incomingCBR frames is greater than the provisioned value ofthis attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedincoming CBR frames is still greater than the provi-sioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded incoming CBR frames drops be-low the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded incoming CBR framesare not monitored and no alarm is generated. Whilethe alarm is set, if the value of this attribute ischanged, the alarm is cleared. This attribute is notapplicable for 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards.

Class NA

Presence required

Visibility customer

115


Range [0..4294967295]


Initial value 0

shapeRecoupPolicy

Parameter name shapeRecoupPolicy

Domain

Description This attribute specifies the shaping recoup policy forthe CBR service category. This is the policy whichis used to recoup shaping opportunities which arelost when more than one connection schedules acell for the same transmit opportunity. In this case,one connection is scheduled and the cell from theother connection is delayed by one cell time. Thisattribute affects how the transmit time is calculatedfor the next cell on the delayed connection. This at-tribute is ignored if this service category is notshaped. This attribute does not apply to basicVPTs, or standard Vpt VCCs. This attribute is notapplicable and is ignored for 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards.When the connection which was delayed schedulesthe next cell to transmit, it may calculate the time asa difference from either the previous actual celltransmit time, or the time when the previous cellshould have been transmitted. A value of maxim-umEfficiency results in each connection trying to re-coup or regain any delays in scheduling. The trans-mit time for the next cell is calculated from the timewhen the previous cell should originally have beensent. Cell delay variation (CDV) occurs in this casesince the cells are sent with less than the shapingdelay between them. However, in general theshaper recovers (recoups) lost opportunities andimproves efficiency. A value of minimumCdv resultsin connections not trying to recoup or regain anydelays in scheduling. The transmit time for the nextcell is calculated from the time when the previouscell was actually transmitted. This minimizes CDV,but results in missed cell opportunities.

Class NA

Presence required

Visibility customer

Range minimumCdv, maximumEfficiency


116


Initial value minimumCdv

svcMpHoldingPriority

Parameter name svcMpHoldingPriority

Domain

Description This attribute specifies the default holding prioritywhich applies to SVC CBR point-to-multipoint con-nections. It takes a value from 0 (highest priority) to4 (lowest priority). In a situation where the linkbandwidth fluctuates, such as over an IMA link,holding priority is used to determine which connec-tions are held and which are released. Holding pri-ority 4 connections are the first to be released.Holding priority 0 connections are the last to be re-leased. This attribute does not apply to Vpt VCCs.When bandwidth fluctuates, the entire Vpt compon-ent, along with all Vpt VCCs is released as a unit,according to the Vpt's holdingPriority.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 3

trafficShaping

Parameter name trafficShaping

Domain

Description This attribute specifies the default traffic shapingoption for connections of the CBR service category.An override to this default may be specified for aprovisioned connection under the Vcd Tm or VpdTm component. This attribute does not apply to ba-sic VPTs, or standard Vpt VCCs. A value of dis-abled means traffic shaping cannot be enabled forany CBR connections. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,1pOC12SmLrAtm, and 1pOC48ChSmIrAtm cards,the value of this attribute must be disabled sincetraffic shaping is not supported for CBR connec-tions on these cards. If the Vcc Tm, Vpc Tm, or VptTm, txTrafficDescType attribute indicates type 1 or

117


2, this attribute is ignored and traffic shaping is notapplicable for that connection. A value of in-verseUpc means traffic shaping for a connection isenabled according to the value of the Vcc Tm, VpcTm, or Vpt Tm txTrafficDescType attribute. A valueof inverseUpc when the txTrafficDescType is 3, 4,or 5, means linear traffic shaping is enabled. Lineartraffic shaping uses a single static traffic shapingrate. A value of inverseUpc when the txTrafficDesc-Type is 6, 7, or 8, means inverse-UPC (also re-ferred to as VBR or dual leaky bucket) traffic shap-ing is enabled. Inverse-UPC traffic shaping canburst above the sustained cell rate to the peak cellrate for the duration defined by the maximum burstsize. Inverse-UPC traffic shaping exactly conformsto the requirements of a dual leaky bucket UPC en-forcer. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards, the value inverseUpcis not available. A value of enabled when the txTraf-ficDescType is 3, 4, 5, 6, 7, or 8, means lineartraffic shaping is enabled. Enabling or disablingtraffic shaping may require a matching change tothe emissionPriority attribute and the un-shapedTransmitQueueing attribute for this servicecategory. Refer to those attributes for the completedescription of the interactions.

Class NA

Presence required

Visibility customer

Range enabled, disabled, inverseUpc



txCellDiscardThreshold

Parameter name txCellDiscardThreshold

Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing cells for CBR servicecategory. If the count of discarded outgoing CBRcells is greater than the provisioned value of this at-tribute in a 15 minute interval, the alarm is set.While the alarm is set, if the count of discarded out-going CBR cells is still greater than the provisionedvalue of this attribute in the subsequent 15 minuteintervals, the alarm is not set again. If the count ofdiscarded outgoing CBR cells drops below the pro-

118


visioned value of this attribute in a 15 minute inter-val the alarm is cleared. Provisioned value of '0'means discarded outgoing CBR cells are not mon-itored and no alarm is generated. While the alarm isset, if the value of this attribute is changed, thealarm is cleared. This attribute is not applicable for3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm and 2pJ6MAtm cards. This attribute isnot applicable for 4pOC12SmIrAtm and4pOC12SmLrAtm cards when channelized

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

txFrameDiscardThreshold

Parameter name txFrameDiscardThreshold

Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing frames for CBR ser-vice category. If the count of discarded outgoingCBR frames is greater than the provisioned value ofthis attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedoutgoing CBR frames is still greater than the provi-sioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded outgoing CBR frames drops be-low the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded outgoing CBR framesare not monitored and no alarm is generated. Whilethe alarm is set, if the value of this attribute ischanged, the alarm is cleared. This attribute is notapplicable for 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards

Class NA

Presence required

Visibility customer

119


Range [0..4294967295]


Initial value 0

txQueueLimit

Parameter name txQueueLimit

Domain

Description This attribute specifies the default maximum queuelength for the emission queues used to buffer thetraffic of the CBR service category. It is used as thebasis for setting both the queue length and the dis-card thresholds on both common and per-VCqueues. For the common queue, the discardthresholds are set at approximately 35, 75, and 90percent of the value of this attribute for traffic at dis-card priority 3 (DP=3), DP=2 and DP=1 respect-ively. For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, common queuing is notavailable for the CBR service category. For a per-VC queue, the actual queue length may be reduceddepending on the shaping rate of the connection(for standard Vpt VCCs, this is the shaping rate ofthe Vpt component). The discard thresholds are setat approximately 35, 75 and 90 percent of thescaled queue limit for traffic at discard priority 3(DP=3), DP=2 and DP=1 respectively. However, areduction will never result in a value that is lessthan the value of the minPerVcQueueLimit attribute.The per-VC queue limit may be overridden for aprovisioned connection by specifying a value in theVcd Tm or Vpd Tm txQueueLimit attribute. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, 1pOC12SmLrAtm, and1pOC48ChSmIrAtm cards, per-VC queues are notavailable for the CBR service category. For1pOC48ChSmIrAtm cards, this attribute is used toset the maximum size of the link-class queue forbuffering the egress traffic of the CBR service cat-egory. This is similar to common queuing, exceptthat each CBR connection maintains a per-VC util-ization limit of the common queue specified for aprovisioned connection by the Vcd Tm or Vpd TmtxQueueLimit attribute. A value of autoConfiguremeans an appropriate value is selected based onthe card type. For 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, 2pJ6MAtm, 2pOC3MmAtm2,

120


2pOC3SmAtm2, 2pSTM1eAtm, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch, 4pOC3MmAtm,4pOC3SmIrAtm, 4pDS3ChAtm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm, MSA32,16pOC3SmIrAtm, and 16pOC3PosAtm cards thevalue is 96. For 1pOC12SmLrAtm cards, the valueis 350. For 4pOC12SmIrAtm, and 4pOC12SmLrAtmcards, the value is 384. For 4pMRPosAtm cards,the value is 386 for OC-12 ports and 1544 for OC-48 ports. For 1pOC48ChSmIrAtm cards, the valueis 2176. The operational value of the maximumlength of a queue (common or per-VC) is indicatedby the Vcc Tm, Vpc Tm, or Vpt TmtxQueueThresholds attribute. For standard VPTs,this attribute only applies when using commonqueuing. When using per-VC queuing, regardless ofthe Vpt's service category, standard VPTs use theAtmIf CA NrtVbr txQueueLimit attribute value astheir default. This attribute does not apply to basicVPTs. For 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, and 2pJ6MAtm cards thevalid range for this attribute is from 5 to 30000 in-clusive. For 2pOC3MmAtm2, 2pOC3SmAtm2,2pSTM1eAtm, 2pSTM1eCh, 2pSTM1Ch,2pOC3Ch, 4pOC3Ch, 4pOC3MmAtm,4pOC3SmIrAtm, 4pDS3ChAtm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm, MSA32,1pOC12SmLrAtm, and 1pOC48ChSmIrAtm cards,the valid range for this attribute is from 5 to 63488inclusive. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards, the valid range for thisattribute is from 5 to 512000 inclusive. For16pOC3PosAtm cards, the valid range for this at-tribute is from 32 to 261120 inclusive. For4pMRPosAtm cards, the valid range for this attrib-ute is from 32 to 1011840 inclusive.

Class NA

Presence required

Visibility customer




unshapedTransmitQueueing

Parameter name unshapedTransmitQueueing

121


Domain

Description This attribute specifies the default queuing optionfor unshaped connections of the CBR service cat-egory. This attribute controls whether common orper-VC queuing is used. A value of perVc meansthat each connection has its own buffering andqueue limits. A value of common means that cellsare queued in First In First Out order on a commonqueue for this service category. The commonqueue has one set of congestion control levels forall cells enqueued on it. If traffic shaping for thisservice category is specified, the value of this attrib-ute must be perVc. This attribute does not apply tobasic VPTs and standard Vpt VCCs. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, 1pOC12SmLrAtm, and1pOC48ChSmIrAtm cards, the value of this attrib-ute must be common since these cards do not sup-port per-VC queuing for the CBR service category.For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards the value of this attributemust be perVc since these cards do not supportcommon queuing for the CBR service category. For16pOC3PosAtm and 4pMRPosAtm cards, no morethan 32,000 connections on the FP can use per-VCqueuing. The remaining connections must use com-mon queuing. The Lp Eng Arc perVcQueueUsageattribute indicates the number per-VC queues thatare currently in use.

Class NA

Presence required

Visibility customer

Range perVc, common


Initial value common

usageParameterControl

Parameter name usageParameterControl

Domain

Description This attribute specifies the default usage parametercontrol (UPC) option for connections of the CBRservice category. This attribute is ignored if the rx-TrafficDescriptorType indicates 1 or 2. An overrideto this default may be specified for a provisionedconnection under the Vcd Tm or Vpd Tm compon-

122


ent. A value of enforced means UPC is enforced foreach connection. When UPC is enforced, non-conforming cells are either tagged or discarded de-pending on the rxTrafficDescriptorType. A value ofmonitored means UPC conformance checking isperformed, except, instead of the non-conformingcells being tagged or discarded, they are merelycounted in the UPC violations counts and passedon unchanged. A value of disabled means UPC isdisabled on the receive path for all CBR connec-tions. This attribute does not apply to basic VPTs,or standard Vpt VCCs. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, and 2pJ6MAtmcards, the value monitored is not supported. Thisvalue has the same effect as disabled. For1pOC48ChSmIrAtm cards, the value of this attrib-ute must be disabled.

Class NA

Presence required

Visibility customer

Range enforced, disabled, monitored



weightPolicy

Parameter name weightPolicy

Domain

Description This attribute specifies the policy which is appliedwhen calculating the fairness weight for unshapedconnections of the CBR service category. The fair-ness weight for a connection determines the relat-ive amount of bandwidth which that connection ob-tains, compared to other connections in the sameservice category. Connections with equal weight getequal transmit opportunities. Connections with high-er weights get more transmit opportunities com-pared with connections that have lower weights. Anoverride to this default may be specified for a provi-sioned connection under the Vcd Tm or Vpd Tmcomponent. The fairness weight for a connection isdirectly proportional to the value of one of the trafficdescriptor parameters for that connection. This at-tribute specifies which traffic descriptor parameter isused for connections of the CBR service category.A value of scr means the fairness weight is propor-

123


tional to the transmit sustained cell rate (SCR) of aconnection. Connections with a higher SCR have ahigher fairness weight. For connections with txTraf-ficDescType 3, which have no SCR, the sustainedcell rate is assumed to be equal to the peak cellrate. A value of pcr means the fairness weight isproportional to the transmit peak cell rate (PCR) ofa connection. Connections with a higher PCR havea higher fairness weight. Connections with txTraffic-DescType 1 or 2 get a minimum weight, which is 1.A value of ecr means the fairness weight is propor-tional to the equivalent cell rate (ECR) of a connec-tion as calculated by connection admission control(CAC). Connections with a higher ECR have a high-er fairness weight. Connections with an ECR of 0get a minimum weight, which is 1. The weight of aconnection is visible in the Vcc Tm, Vpc Tm, or VptTm weight attribute. This attribute does not apply tobasic VPTs and standard Vpt VCCs. This attributeis ignored if the value of the unshapedTrans-mitQueueing attribute is common. This attribute isnot applicable and is ignored for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,1pOC12SmLrAtm, and 1pOC48ChSmIrAtm cards.

Class NA

Presence required

Visibility customer

Range scr, pcr, ecr


Initial value ecr

124


29 AtmControlChannelVcd (Vcd)






Parents:

EM - AtmIf - Uni - Sig - Vcd

EM - AtmIf - Pnni - Rcc - Vcd

EM - AtmIf - Pnni - Sig - Vcd

Child(ren):

-

Identifiers:

-

Links:


Parameters:

atmServiceCategory


Domain

Description This attribute specifies the ATM service category forboth directions of the connection. The constant-BitRate service category is intended for real timeapplications, that is those requiring tightly con-strained delay and delay variation, as would be ap-propriate for voice and video applications. The con-sistent availability of a fixed quantity of bandwidth isconsidered appropriate for CBR service. Cellswhich are delayed beyond the value specified byCellTransfer Delay are assumed to be of signific-

125


antly reduce value to the application. The rtVari-ableBitRate service category is intended for realtime applications, that is those requiring tightly con-strained delay and delay variation, as would be ap-propriate for voice and video applications. Sourcesare expected to transmit at a rate which varies withtime. Equivalently, the source can be described as"bursty". Cells which are delayed beyond the valuespecified by CTD are assumed to be of significantlyreduced value to the application. Real time VBRservice may support statistical multiplexing of realtime sources. The nrtVariableBitRate service cat-egory is intended for non-real time applicationswhich have bursty traffic characteristics and whichcan be characterized in terms of a PCR, SCR, andMBS. For those cells which are transferred withinthe traffic contract, the application expects a lowcell loss ratio. For all connections, it expects abound on the mean cell transfer delay. Non-realtime VBR service may support statistical multiplex-ing of connections. The unspecifiedBitRate serviceis intended for non-real time applications; that is,those not requiring tightly constrained delay anddelay variation. UBR sources are expected to bebursty. UBR service supports a high degree of stat-istical multiplexing among sources. UBR servicedoes not specify traffic related service guarantees.No numerical commitments are made with respectto the cell loss ratio experienced by a UBR connec-tion, or as to the cell transfer delay experienced bycells on the connection.

Class NA

Presence required

Visibility customer




qosClass

Parameter name qosClass

Domain

Description This attribute specifies the quality of service for boththe forward and backward direction for this connec-tion. Class 1 supports a QOS that meets ServiceClass A performance requirements (Circuit emula-

126


tion, constant bit rate video). Class 2 supports aQOS that meets Service Class B performance re-quirements (Variable bit rate audio and video).Class 3 supports a QOS that meets Service ClassC performance requirements (Connection-OrientedData Transfer). Class 4 supports a QOS that meetsService Class D performance requirements(Connectionless Data Transfer). Class 0 is the un-specified bit rate QOS class; no objective is spe-cified for the performance parameters.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 2

trafficDescParm

Parameter name trafficDescParm

Domain

Description This attribute is a vector of five traffic parameterswhose meanings are defined by the trafficDescTypeattribute. The values of peak cell rate (PCR), sus-tained cell rate (SCR) and requested shaping rateare expressed in cell/s. Maximum burst size (MBS)is expressed in cells. CDVT is expressed in micro-seconds. The values of PCR, SCR, MBS and CDVTare used for connection admission control (CAC).The value of CDVT is only used for connectionswhere the atmServiceCategory is constantBitRate.For all other values of atmServiceCategory, CDVTis ignored. The values of PCR, SCR and requestedshaping rate are used to determine the actual shap-ing rate where traffic shaping is enabled. When traf-ficDescType is 3, parameter 1 represents the PCRfor CLP equal to 0 and 1 traffic; parameter 4 repres-ents the CDVT; and parameter 5 represents the re-quested shaping rate. A non-zero value in paramet-er 5 overrides any value in parameter 1. This resultis used as the PCR. Parameter 1 must be non-zero.Parameters 2 and 3 must be zero. When traffic-DescType is 6, parameter 1 represents the PCR forCLP equal to 0 and 1 traffic; parameter 2 repres-ents the SCR for CLP equal to 0 and 1 traffic; para-meter 3 represents the MBS for CLP equal to 0 and1 traffic; parameter 4 represents the CDVT; and

127


parameter 5 represents the requested shaping rate.A non-zero value in parameter 5 overrides anyvalue in parameter 1. This result is used as thePCR. Parameters 1, 2, and 3 must be non-zero.Parameter 1 must be greater than or equal to para-meter 2. Parameter 5 must either be zero (unused)or greater than or equal to parameter 2. When traf-ficDescType is 7, parameter 1 represents the PCRfor CLP equal to 0 and 1 traffic; parameter 2 repres-ents the SCR for CLP equal to 0 with cell discard;parameter 3 represents the MBS for CLP equal to 0traffic; parameter 4 represents the CDVT; and para-meter 5 represents the requested shaping rate. Anon-zero value in parameter 5 overrides any valuein parameter 1. This result is used as the PCR.Parameters 1, 2, and 3 must be non-zero. Paramet-er 1 must be greater than or equal to parameter 2.Parameter 5 must either be zero (unused) or great-er than or equal to parameter 2. When trafficDesc-Type is 8, parameter 1 represents the PCR for CLPequal to 0 and 1 traffic; parameter 2 represents theSCR for CLP equal to 0 traffic with cell tagging;parameter 3 represents the MBS for CLP equal to 0traffic; parameter 4 represents the CDVT; and para-meter 5 represents the requested shaping rate. Anon-zero value in parameter 5 overrides any valuein parameter 1. This result is used as the PCR.Parameters 1, 2, and 3 must be non-zero. Paramet-er 1 must be greater than or equal to parameter 2.Parameter 5 must either be zero (unused) or great-er than or equal to parameter 2. Whenever it is validfor PCR to be specified, parameter 5 may also beused to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value inparameter 1 and is used as the peak cell rate in cal-culations of CAC and shaping rate. For trafficDesc-Type 3 the traffic is shaped at the next rate lessthan the PCR. For trafficDescType 6, 7, and 8, thetraffic is shaped at the highest available rate whichis between PCR and SCR. However, if there is noavailable shaping rate between PCR and SCR,traffic is shaped at the next rate above the PCR.

Class NA

Presence required

Visibility customer

Range [0..2147483647]



128


trafficDescType

Parameter name trafficDescType

Domain

Description This attribute specifies the type of traffic manage-ment which is applied to both the transmit and re-ceive direction of this connection as defined in theATM Forum. The trafficDescType determines thenumber and meaning of the parameters in the traf-ficDescParm attribute.

Class NA

Presence required

Visibility customer

Range 3, 6, 7, 8


Initial value 6

trafficShaping


Domain

Description This attribute specifies whether this connectionuses traffic shaping when transmitting traffic to theATM interface. When sameAsCa is selected, trafficshaping for this connection is based on the traffic-Shaping attribute of the connection's service cat-egory component under the AtmIf CA. If the servicecategory has traffic shaping enabled, then trafficshaping is enabled for the connection. Note that en-abling traffic shaping may have no effect under cer-tain cases. These cases are listed in the descriptionof the trafficShaping operational attribute, which isunder the Vcc Tm and Vpc Tm components. Whendisabled is selected, traffic shaping for this connec-tion is disabled.

Class NA

Presence required

Visibility customer

Range disabled, sameAsCa



129




Domain

Description This attribute only applies when this connection isunshaped. This attribute specifies the transmitqueuing method for this connection if it is un-shaped. Refer to the unshapedTransmitQueueingattribute under the AtmIf CA service category sub-component for more details on the meaning of thisattribute. When this attribute is set to sameAsCa,the transmit queuing method for the connection isbased on the unshapedTransmitQueueing attributeof the connection's service category component un-der the ConnectionAdministrator. When this attrib-ute is set to common, transmit traffic on this un-shaped connection is destined for the commonqueue. The value sameAsInterface is for migrationfrom previous software releases, but should nolonger be used

Class NA

Presence required

Visibility customer

Range common, sameAsCa


Initial value sameAsCa



Domain

Description This attribute specifies whether this connection en-forces usage parameter control when receivingtraffic from the ATM interface. When sameAsCa isselected, UPC for the connection is based on theusageParameterControl attribute of the connec-tion's service category component under the Con-nectionAdministrator. If the service category hasUPC enabled, then UPC is enabled for the connec-tion. Note that enabling UPC may have no effectunder certain cases. These cases are listed in thedescription of the usageParameterControl opera-tional attribute, which is under the Vcc Tm or VpcTm component. When disabled is selected, UPC forthis connection is disabled. The value sameAsInter-face is for migration from previous software re-leases, but should no longer be used

130


Class NA

Presence required

Visibility customer




weight

Parameter name weight

Domain

Description This VCD component has an attribute that is calledatmServiceCategory. This attribute specifies theservice category that is used by the sig, rcc or ilmichannel. The weight attribute is related to two otherattributes which are weightPolicy and txQueueLimit,as mentioned in the following description. These at-tributes can be found under the atmif/n ca<atmServiceCategory>/ m. This attribute specifiesan override for the weight of this unshaped connec-tion. This attribute is ignored for shaped connec-tions, for ABR connections, for connections on aCQC-based ATM FPs and basic VPTs. When thevalue is set to sameAsCa, the weight is determinedby the weightPolicy attribute under the CA servicecategory component for all but standard VPT VCCs.For standard VPT VCCs, the weight is determinedby the VCC's service category, when the value isset to sameAsCa. When this attribute is set to avalue from 1 to 4095, that value is used for theweightPolicy of this connection relative to other con-nections. For all but standard VPT VCCs, weight-Policy determines the proportion of transit cell op-portunities which are allocated to this connection,compared to other connections in the same servicecategory. For standard VPT VCCs, weightPolicy de-termines the proportion of transmit cell opportunitieswhich are allocated to this connection, compared toother connections associated with the VPT. Whenthe value is set to upToQueueLimit, the weight-Policy is limited only by the txQueueLimit.

Class NA

Presence required

Visibility customer

Range { [1..4095],upToQueueLimit, sameAsCa }

131




132


30 AtmDstPvc (Dst)






Parents:

EM - AtmIf - Vpt - Vcc - Dst

EM - AtmIf - Vcc - Dst

Child(ren):

Config -

Identifiers:

-

Links:


Parameters:

133


31 AtmDstPvcConfig (Config)





Parents:

EM - AtmIf - Vpt - Vcc - Dst - Config

EM - AtmIf - Vcc - Dst - Config

Child(ren):

-

Identifiers:

-

Links:


Parameters:

aisGeneration

Parameter name aisGeneration

Domain

Description This attribute specifies whether OAM-AIS genera-tion occurs on the connection towards this interfacewhen the SPVC or SPVP is down. If this attribute isenabled, OAM-AIS cells are generated for thisSPVC or SPVP when the SPVC or SPVP is not up.If this attribute is set to disabled, OAM-AIS cells arenot generated.

Class NA

Presence required

Visibility customer


134




bandwidthElastic


Domain

Description This attribute is only of use for provisioned SPVCand SPVP destination points which are carried in anIMA group. This attribute specifies whether or notthe connection will be dropped if the link bandwidthis reduced below the value of the requested con-nection bandwidth. For example, the link bandwidthmay be reduced in the event that one or more phys-ical links in the IMA group fail and now the originallyrequested connection bandwidth cannot be main-tained. A value of yes, indicates that this connectionis bandwidth elastic, and the link bandwidth may fallbelow the requested connection bandwidth but theconnection will not drop. A value of no indicates thatthe bandwidth for this connection can't be reducedin the event of link bandwidth reduction. Note thatconnections may still be dropped based on its hold-ing Priority.

Class NA

Presence required

Visibility customer

Range no, yes


Initial value no

135


32 AtmIfEmissionPriority (Ep)






Parents:

EM - AtmIf - Ep

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n EmissionPriority/n This component controlsthe characteristics of an emission priority for an At-mIf component. This component is optional for anAtmIf component. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm, and1pOC48ChSmIrAtm cards, this component is notpermitted. There are eight emission priorities (EP).EP 0 is the highest priority and EP 7 is the lowestpriority. Normally, link bandwidth is allocated in

136


strict precedence of emission priority. All traffic atEP 0 is transmitted on the link first. Then, whenthere is an unused cell opportunity, a cell from EP 1is transmitted. When EP 0 and 1 have nothing tosend, then EP 2 gets the transmit cell opportunities.Each emission priority 2 through 7 has a corres-ponding Ep component with instance number 2through 7. Emission priorities 0 and 1 do not havecorresponding Ep components since there is noconfiguration which is relevant for those EPs. Trafficis associated with an EP in the following way. EachVcc or Vpc has an associated atmServiceCategory.Under the AtmIf component there is a service cat-egory component which provides default character-istics for that service category. For example, AtmIf/n CA Cbr/0 defines the default characteristics forconnections of the CBR service category. Each ser-vice category has an emissionPriority (ep) attribute,for example AtmIf/n CA Cbr/0 ep. The value provi-sioned in that ep attribute maps to the correspond-ing Ep component. If the value of the AtmIf/n CACbr/0 ep attribute is 2, the CBR service category isassociated with AtmIf/n Ep/2. EP 0 and EP 1 are inthe absolute priority range. Traffic in the absolutepriority range always gets first choice for a transmitcell opportunity. EP 2 through EP 7 are in the guar-anteed bandwidth range. Traffic at EP 3 through EP7, in the guaranteed bandwidth range, may achievea priority which is different from the strict hierarchic-al priority, if a minimum bandwidth guarantee is pro-visioned for the Ep. For 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards,EPs 5 and 6 are not supported. For16pOC3PosAtm and 4pMRPosAtm cards, EP 0 andEP 1 are in the absolute priority range while EP 2through EP 7 are allocated link bandwidth using aconventional Weighted Fair Queue (WFQ) discip-line. EP 2 through EP 7 have their service prefer-ence over one another determined by their minim-um bandwidth guarantee. Link bandwidth is first al-located to EP 0 and EP 1 in absolute priority fash-ion. Any remaining bandwidth is distributed to EP 2through EP 7 in proportion to the minimum band-width guarantee provisioned for the Ep. The defaultvalues of the minimumBandwidthGuarantee attrib-ute for the Ep components emulate the strict pre-cedence of emission priority.

Class NA

Presence required

Visibility customer

137


Unit

Range [2..7]

Data Type Decimal

Initial Value

minimumBandwidthGuarantee

Parameter name minimumBandwidthGuarantee

Domain

Description This attribute specifies the minimum bandwidthguarantee associated with this EmissionPriority. Aminimum bandwidth guarantee is designed to pre-vent starvation of traffic at this EP by traffic at high-er EPs. Minimum bandwidth guarantees only oper-ate for EPs within the guaranteed bandwidth range2 through 7. For 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards,EPs 5 and 6 are not supported. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, 1pOC12SmLrAtm, 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards, thefollowing description applies: The minimum band-width guarantee specified is a percentage of thebandwidth which remains after all traffic at EP 0 andEP 1 is served. For example, if EP 0 and EP 1traffic consumes 20% of the link bandwidth, theminimum bandwidth guarantee applies to the re-maining 80% of the link bandwidth. A minimumbandwidth guarantee of 2% would actually result inthis EP getting 2% of 80% for a total 1.6% of thelink bandwidth. If this EP uses less than this linkbandwidth, the extra opportunities are allocated tothe other EPs in priority. Due to scheduling and cellarrival times, traffic at this EP may not necessarilyachieve full utilization of its minimum bandwidthguarantee. The value priority specifies that this Epgets bandwidth based solely on the hierarchy ofemission priorities. In this case, there is no minim-um bandwidth guarantee. For 16pOC3PosAtm and4pMRPosAtm cards, the following description ap-plies: The minimum bandwidth guarantee specifiedis the proportion of the bandwidth which remainsafter all traffic at EP 0 and EP 1 is served. In otherwords, the bandwidth allocated to an EP is:(bandwidth unused by EP 0 and 1) * minimumBand-

138


widthGuarantee (the sum of the values of the min-imumBandwidthGuarantee attributes for all activeEPs) For example, if EP 0 and EP 1 traffic con-sumes 20% of the link bandwidth, the minimumbandwidth guarantee applies to the remaining 80%of the link bandwidth. Assume Ep/2, Ep/3, and Ep/4have a minimumBandwidthGuarantee attributevalue of 70, 20, and 10 respectively. If all EPs areactively sending traffic, then the bandwidth is alloc-ated as follows: - EP 2 = 80% * 70/(70+20+10) =56% of the link bandwidth - EP 3 = 80% *20/(70+20+10) = 16% of the link bandwidth - EP 4 =80% * 10/(70+20+10) = 8% of the link bandwidth Ifsome time later EP 3 has no traffic to send, then itsshare of the bandwidth is allocated to EP 2 and EP4 in proportion to their minimumBandwidthGuaran-tee attribute values as follows: - EP 2 = 80% *70/(70+10) = 70% of the link bandwidth - EP 4 =80% * 10/(70+10) = 10% of the link bandwidth Ifsome time later only one out the EP 2, EP 3, andEP 4 has traffic to send, then it would be allocatedthe entire 80% of the link bandwidth. Additionally, ifboth EP 0, and EP 1 have no traffic to send, the re-maining active EP would be allocated 100% of thelink bandwidth irrespective of the value of its minim-umBandwidthGuarantee attribute. The value priorityemulates the strict precedence of emission priorityby assigning default values to the minimumBand-widthGuarantee attribute. Depending on how manyEPs are in use in the guaranteed bandwidth range2 through 7, these default values change: - For oneEP, the value is 100. - For two EPs, the values are99, and 1. - For three EPs, the values are 90, 9,and 1. - For four EPs, the values are 77, 18, 4, and1. For all cards, when specifying a value for theminimumBandwidthGuarantee attribute, considerthe effect on cell delay variation (CDV) of trafficwhich would normally be of higher priority. For ex-ample, if RtVbr service category traffic is assignedto Ep/2 and Ubr traffic is assigned on Ep/7 whereEp/7 has a minimumBandwidthGuarantee of 25,there can be a large impact on the CDV of theRtVbr traffic. Traffic of the Cbr or RtVbr service cat-egory which is sensitive to CDV, and is of knownvolume, can be assigned on EP 0 or EP 1 whichare independent of the effects of minimum band-width guarantee. For 2pOC3MmAtm2,2pOC3SmAtm2, 2pSTM1eAtm, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch, 4pOC3MmAtm,4pOC3SmIrAtm, 4pDS3ChAtm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm, MSA32, and

139


1pOC12SmLrAtm cards, the allowed values of thisattribute are priority, or a numeric value between 1and 48. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,16pOC3SmIrAtm, 16pOC3PosAtm, and4pMRPosAtm cards, the allowed values of this at-tribute are priority, or a numeric value between 1and 100. For all cards, the sum of the values of theminimumBandwidthGuarantee attribute for all Epsunder an AtmIf component must not exceed 100%.

Class NA

Presence required

Visibility customer

Range { [1..100],priority }


Initial value priority

140


33 AtmIlmi (Ilmi)





Parents:

EM - AtmIf - Uni - Ilmi

Child(ren):

Esi -

Identifiers:

-

Links:


Parameters:

operatingMode

Parameter name operatingMode

Domain

Description This attribute is used to enable/disable the ILMI pro-tocol. addressRegEnabled indicates that the ILMIaddress registration protocol is enabled. address-RegDisabled indicates that the ILMI address regis-tration protocol is disabled. ilmiDisabled indicatesthat all of ILMI is disabled.

Class NA

Presence required

Visibility customer

Range addressRegEnabled, addressRegDisabled, ilmiD-isabled


141


Initial value addressRegEnabled

prefixToRegister

Parameter name prefixToRegister

Domain

Description This attribute is a list of zero or more addresses. Ifthe side attribute in the Uni component is set touser, then this attribute must be empty; if the sideattribute is set to network, then this attribute is a listof prefixes.This attribute represents a list of prefixaddresses (26 digits) that are sent to the user side.If no prefixes are entered, then the nodeAddress at-tribute in the AtmCallRouter component is used foraddress registration.

Class NA

Presence optional

Visibility customer

Range [26..26]

Data type Variable[10] List of AsciiString

Initial value N.A.

vci

Parameter name vci

Domain

Description This attribute identifies the ILMI channel number.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 16

142


34 AtmInterface (AtmIf)






Parents:

EM - AtmIf

Child(ren):

CA - ConnMap - Ep - Ltu - NAcct - Pnni - Uni - Vcc - Vpc - Vpt -

Identifiers:


MaxIn-stances


Links:


interfaceName • Lp OamEnet

• Lp Eth

• Lp Sonet Sts

• Lp Sdh Vc4

• Laps Sts

•

applicationFramer-Name

Parameters:

rdnId


Domain

Description AtmInterface/n An AtmIf component is provisionedfor each ATM interface. It manages the set of ATM

143


connections that terminate at or traverse the inter-face.

Class NA

Presence required

Visibility customer

Unit

Range [1..4095]

Data Type Decimal

Initial Value

ctdCalculation

Parameter name ctdCalculation

Domain

Description This attribute specifies whether cell transfer delaycalculation should be performed on loopback cellsfor each SPVC and SPVP connection under this in-terface. Cell transfer delay is calculated as half ofthe measured segment round trip delay of a loop-back cell. Cell transfer delay calculation is only sup-ported when segment switch side loopback is en-abled on the source segment endpoint. Cell transferdelay calculation is only performed on supportedconnections when the accountCollection attribute ofthe AtmIf Uni or AtmIf Iisp component has a non-empty reason. Cell transfer delay calculation is notprovided for connections under the Vpt. Attributevalue version2on is currently not supported. To en-able cell transfer delay calculation, value ver-sion1on should be used.

Class NA

Presence required

Visibility customer

Range off, version1on, version2on


Initial value off

customerIdentifier


Domain

Description This attribute holds the Customer Identifier (CID).

144


Every component has a CID. If a component has acid attribute, the component's CID is the provi-sioned value of that attribute; otherwise the com-ponent inherits the CID of its parent. The top- levelcomponent has a CID of 0. Every operator sessionalso has a CID, which is the CID provisioned for theoperator's user ID. An operator will see only thestream data for components having a matchingCID. Also, the operator will be allowed to issuecommands for only those components which have amatching CID. An operator CID of 0 is used toidentify the Network Manager (referred to as "Net-Man" in DPN). This CID matches the CID of anycomponent. Values 1 to 8191 inclusive (equivalentto "basic CIDs" in DPN) may be assigned to specificcustomers.

Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

endToEndLoopback

Parameter name endToEndLoopback

Domain

Description This attribute specifies the default value for end-to-end loopback insertion for all connections underthis interface. End-to-end loopback insertion is notpossible if the value of the connectionPointType at-tribute of the Vcc or Vpc component is connecting-Point, or segmentEndPoint. End-to-end loopbackinsertion is possible if the value of the connection-PointType attribute of the Vcc or Vpc component isconnectionEndPoint. End- to-end loopback insertionis always possible on a Vpt component.

Class NA

Presence required

Visibility customer

Range on, off


Initial value off

145


faultHoldOffTime

Parameter name faultHoldOffTime

Domain

Description This attribute specifies the delay before faults de-tected at the VP layer are propagated to the VC lay-er, and thus to the application using the connection.If the value is 0, applications using a Virtu-alPathTerminator component are immediately noti-fied of faults detected by the VP. Using this valueallows these applications to be advised of faultswithout requiring loopbacks on each Vcc compon-ent. Typically, the application goes out of servicewhen advised of a fault. If the value is infinity, ap-plications using a VirtualPathTerminator componentare not notified of VP layer faults. Using this valueallows the applications to survive transient VP layerfault conditions. The value chosen applies only toVpts and Vccs directly beneath a Vpt.

Class NA

Presence required

Visibility customer

Range 0, infinity


Initial value infinity

interfaceName

Parameter name interfaceName

Domain

Description This attribute associates the AtmIf component witha specific interface on a Function Processorfor ex-ample, Lp/1 Ds3/0. This implicitly defines the logicalprocessor on which the AtmIf component is activ-ated.

Class NA

Presence required

Visibility customer

Range Lp OamEnet, Lp Eth, Lp Sonet Sts, Lp Sdh Vc4,Laps Sts, Laps Vc4

Data type HwLink

Initial value N.A.

146


maxVpiBits

Parameter name maxVpiBits

Domain

Description This attribute specifies the maximum number of VPIbits that may be active for this AtmIf component.These bits start at the least significant bit positionand are contiguous. In general, the maximum VPIwhich may be used on the interface is2**maxVpiBits - 1. The value of the remaining(inactive) VPI bits is ignored on cells received fromthe link. For 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm, and2pJ6MAtm cards, the value of this attribute must be8. The maximum VPI supported is 255. For all othercards, the value of this attribute may be 8 or 12.The maximum VPI supported is 4095. An exceptionis for the 8pE1Atm, and 8pDS1Atm cards, which donot support VPI 4095. The maximum VPI supportedon these cards is 4094. If a Uni or an Iisp compon-ent is present directly under the AtmIf component,the value of this attribute must be 8.

Class NA

Presence required

Visibility customer

Range 8, 12


Initial value 8

oamSegmentBoundary

Parameter name oamSegmentBoundary

Domain

Description This attribute specifies whether the interface is onan OAM segment boundary. When the value is yes,the interface is on an OAM segment boundary andall connections passing through the interface ter-minate OAM segment cells. When the value is no,the interface is not on an OAM segment boundaryand the interface permits segment OAM cells to bepassed transparently.

Class NA

Presence required

Visibility customer

147


Range no, yes


Initial value yes

remoteAtmInterfaceLabel

Parameter name remoteAtmInterfaceLabel

Domain

Description This attribute specifies a unique indication of the re-mote ATM service or interface component connec-ted to this one. The value of this attribute can beused by network management applications to dis-cover the network's ATM topology from its configur-ation information. The syntax of the value, such ascomponent ID, address, or other numerical identifi-er, must follow the conventions of the network man-agement platform. In absence of such convention orplatform, the value should be left empty. The valueis only stored by the module. It is neither validatednor used to perform any form of remote connectivityvalidation.

Class NA

Presence required

Visibility customer

Range [0..60]


Initial value



Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming cells for all ATM ser-vices. If the count of discarded incoming cells isgreater than the provisioned value of this attribute ina 15 minute interval, the alarm is set. While thealarm is set, if the count of discarded incoming cellsis still greater than the provisioned value of this at-tribute in the subsequent 15 minute intervals, thealarm is not set again. If the count of discarded in-coming cells drops below the provisioned value ofthis attribute in a 15 minute interval the alarm iscleared. Provisioned value of '0' means discarded

148


incoming cells are not monitored and no alarm isgenerated. While the alarm is set, if the value of thisattribute is changed, the alarm is cleared. This at-tribute is not applicable for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm and 2pJ6MAtmcards. This attribute is not applicable for4pOC12SmIrAtm and 4pOC12SmLrAtm cardswhen channelized.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0



Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming frames for all ATMservices. If the count of discarded incoming framesis greater than the provisioned value of this attributein a 15 minute interval, the alarm is set. While thealarm is set, if the count of discarded incomingframes is still greater than the provisioned value ofthis attribute in the subsequent 15 minute intervals,the alarm is not set again. If the count of discardedoutgoing frames drops below the provisioned valueof this attribute in a 15 minute interval the alarm iscleared. Provisioned value of '0' means discardedincoming frames are not monitored and no alarm isgenerated. While the alarm is set, if the value of thisattribute is changed, the alarm is cleared. This at-tribute is not applicable for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


149


Initial value 0

segLinkSideLoopback

Parameter name segLinkSideLoopback

Domain

Description This attribute specifies the default value for link-sidesegment loopback insertion for all connections un-der this interface. Link- side segment loopback isnot possible if the value of the oamSegmentBound-ary attribute of the AtmIf component is no.

Class NA

Presence required

Visibility customer

Range on, off


Initial value off

segSwitchSideLoopback

Parameter name segSwitchSideLoopback

Domain

Description This attribute specifies the default value for switch-side segment loopback insertion for all connectionsunder this interface. Switch- side segment loopbackis not possible if the value of the oamSegment-Boundary attribute of the AtmIf component is no.

Class NA

Presence required

Visibility customer

Range on, off


Initial value off



Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing cells for all ATM ser-vices. If the count of discarded outgoing cells is

150


greater than the provisioned value of this attribute ina 15 minute interval, the alarm is set. While thealarm is set, if the count of discarded outgoing cellsis still greater than the provisioned value of this at-tribute in the subsequent 15 minute intervals, thealarm is not set again. If the count of discarded out-going cells drops below the provisioned value ofthis attribute in a 15 minute interval the alarm iscleared. Provisioned value of '0' means discardedoutgoing cells are not monitored and no alarm isgenerated. While the alarm is set, if the value of thisattribute is changed, the alarm is cleared. This at-tribute is not applicable for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm and 2pJ6MAtmcards. This attribute is not applicable for4pOC12SmIrAtm and 4pOC12SmLrAtm cardswhen channelized.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

txCellMemory

Parameter name txCellMemory

Domain

Description This attribute specifies the percentage of total trans-mit cell memory which is available for use by con-nections under this AtmIf component. Transmit cellmemory is used for storing ATM cells to be trans-mitted by connections under this AtmIf component.This attribute is not applicable, and is ignored for3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, 1pOC12SmLrAtm,1pOC48ChSmIrAtm, 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards. Ifthe value of this attribute is 100, connections underthis AtmIf may use up to 100% of the total transmitcell memory. If the value of this attribute is less than100, then only that percentage of the total transmitcell memory may be used by connections under thisAtmIf component. The minimum value for this attrib-ute is 1 since some cell memory is always required

151


for connections. For 2pOC3MmAtm2,2pOC3SmAtm2, 2pSTM1eAtm, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch, 4pOC3MmAtm,4pOC3SmIrAtm, 4pDS3ChAtm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm, and MSA32cards, the total transmit cell memory is indicated inthe Lp/x Eng Arc Aqm/x txCellMemoryThresholds 0attribute. For 3pDS3Atm2, 3pE3Atm2, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch, 12pDS3Atm,and 12pE3Atm cards, the total transmit cell memoryof an Aqm component is shared across multiple At-mIf interfaces of the card. Specifying a value of 100for each AtmIf enables complete overbooking of thetotal transmit cell memory by the AtmIf componentswhich share the Aqm component. Specifying valuesfor this attribute such that the value for each AtmIfis less than 100 but the sum for all AtmIf compon-ents is more than 100% enables partial overbookingof the transmit cell memory. Specifying values forthis attribute such that the sum for all AtmIf com-ponents is exactly 100%, ensures that each AtmIfhas a dedicated pool of transmit cells with no over-booking. Specifying values for this attribute suchthat the sum for all AtmIf components is less than100% restricts the total size of the free list. This canbe used to ensure the functioning of port aggrega-tion even with a small number of connections. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,4pOC3MmAtm, and 4pOC3SmIrAtm cards, the totaltransmit cell memory of an Aqm component is ded-icated to a single AtmIf interface of the card. Spe-cifying a value for this attribute that is less than 100restricts the total size of the free list. This can beused to ensure the functioning of port aggregationeven with a small number of connections. For16pOC3PosAtm and 4pMRPosAtm cards, the totaltransmit cell memory is indicated in the Lp/x EngArc txCellMemoryThresholds 0 attribute. The totaltransmit cell memory of the Arc component isshared across all AtmIf interfaces of the card. Spe-cifying a value of 100 for each AtmIf enables com-plete overbooking of the total transmit cell memoryby the AtmIf components. Specifying values for thisattribute such that the value for each AtmIf is lessthan 100 but the sum for all AtmIf components ismore than 100% enables partial overbooking of thetransmit cell memory. Specifying values for this at-tribute such that the sum for all AtmIf components isexactly 100%, ensures that each AtmIf has a dedic-ated pool of transmit cells with no overbooking.Specifying values for this attribute such that the

152


sum for all AtmIf components is less than 100% re-stricts the total size of the free list. The attributevalue does not affect the transmit cell memory al-located for common queues used by any of the ser-vice categories.

Class NA

Presence required

Visibility customer

Range [1..100]

Data type Decimal

Initial value 100



Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing frames for all ATMservices. If the count of discarded outgoing framesis greater than the provisioned value of this attributein a 15 minute interval, the alarm is set. While thealarm is set, if the count of discarded outgoingframes is still greater than the provisioned value ofthis attribute in the subsequent 15 minute intervals,the alarm is not set again. If the count of discardedoutgoing frames drops below the provisioned valueof this attribute in a 15 minute interval the alarm iscleared. Provisioned value of '0' means discardedoutgoing frames are not monitored and no alarm isgenerated. While the alarm is set, if the value of thisattribute is changed, the alarm is cleared. This at-tribute is not applicable for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

153


154


35 AtmLinkTxUtilization (Ltu)






Parents:

EM - AtmIf - Ltu

Child(ren):

-

Identifiers:

-

Links:


Parameters:

criticalTxUtilAlarmThreshold

Parameter name criticalTxUtilAlarmThreshold

Domain

Description This attribute specifies the critical alarm thresholdfor the ATM link transmit utilization. A value of dis-abled means the ATM link transmit utilization is notmeasured and no alarms are generated. A changefrom disabled to a numeric value resets the value ofthe lastAlarmPeakTxUtilization attribute to zero andstarts the ATM link transmit utilization measure-ment. When three consecutive samples of the ATMlink transmit utilization, over the 3-minute slidingwindow, are above the provisioned threshold andthere is no outstanding alarm, a critical alarm isgenerated. While the alarm is outstanding, thevalue of the lastAlarmPeakTxUtilization attribute in-

155


dicates the peak sample of the ATM link transmitutilization. When three consecutive samples of theATM link transmit utilization, over the 3-minute slid-ing window, are at or below the provisionedthreshold, any outstanding alarm is cleared. Thevalue of the lastAlarmPeakTxUtilization attribute isnot reset when the alarm is cleared. A change fromone numeric value to another restarts the ATM linktransmit utilization measurement with a new3-minute probation period. The value of thelastAlarmPeakTxUtilization attribute is not affectedby this change. A change from a numeric value todisabled causes any outstanding alarm to becleared immediately. The value of the lastAlarm-PeakTxUtilization attribute is not affected by thischange.

Class NA

Presence required

Visibility customer

Range { [1..99],disabled }


Initial value 80

156


36 AtmNailedUpAccounting (NAcct)






Parents:

EM - AtmIf - NAcct

Child(ren):

-

Identifiers:

-

Links:


Parameters:

accountClass

Parameter name accountClass

Domain

Description This attribute specifies the accounting class associ-ated with the PVCs on this interface. Its meaning isdetermined by the network operator. Its value is re-corded in the accounting records generated by thisinterface, in the attributes, callingServiceType andcalledServiceType.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

157


Initial value 0

accountCollection

Parameter name accountCollection

Domain

Description This attribute specifies the reason(s) for which ac-counting data is collected: billing, test, study, auditor force. If the set of reasons is not empty then ac-counting records will be generated by this interfacein the following situations: - on a TODA (time of dayaccounting) changeover if TODA is enabled; - every12 hours (per connection) if TODA is disabled; -when the PVC is deleted (a call record is generatedwith final cell counts). If none of the reasons ispresent, then accounting will be suppressed for allPVCs on this interface. Accounting can be sup-pressed on individual PVCs by specifying a null cor-relationTag attribute in the AtmIf NAcct component.The reason for collection is recorded in the account-ing record, in the attribute callingCollectReason orcalledCollectReason, as appropriate.

Class NA

Presence required

Visibility customer

Range bill, test, study, audit, force

Data type Set of

Initial value

accountConnectionType

Parameter name accountConnectionType

Domain

Description This attribute specifies whether accounting recordsgenerated for the PVCs on this interface should bemarked as originating, terminating or intermediate.This attribute, in combination with the direction ofthe call, determines the value of attribute con-nPointType of the accounting record. It may beused by downstream accounting processing to cor-relate the records. If the value is origTerm then thevalue of attribute connPointType in the accountingrecords generated for incoming calls will be origin-ating and records generated for outgoing calls willbe terminating. If the value is intermediate then the

158


value of attribute connPointType in the accountingrecords generated for all calls will be intermediate.

Class NA

Presence required

Visibility customer

Range origTerm, intermediate


Initial value origTerm

serviceExchange

Parameter name serviceExchange

Domain

Description This attribute specifies the data service exchangeassociated with this interface. Its meaning is de-termined by the network operator. Its value is recor-ded in the accounting records generated by this in-terface, in the attributes, callingDse and calledDse.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 0

159


37 AtmNailedUpEndPoint (Nep)






Parents:

EM - AtmIf - Vpt - Vcc - Nep

EM - AtmIf - Vcc - Nep

Child(ren):

-

Identifiers:

-

Links:


Parameters:

160


38 AtmNailedUpRelayPoint (Nrp)






Parents:

EM - AtmIf - Vpt - Vcc - Nrp

EM - AtmIf - Vcc - Nrp

EM - AtmIf - Vpc - Nrp

Child(ren):

-

Identifiers:

-

Links:


nextHop • Ss7 SaalNni AtmCon

• AtmMpe Ac AtmCon

• AtmIf Vpt Vcc Nrp

• AtmIf Vcc Nrp

• AtmIf Vpc Nrp

• ARtg Pnni CfgNode Rcc At-mCon

• IpIf BwPool Path AtmCon

• Iub Sig SaalUni AtmCon

• Aal2If Alcap SaalUni Atm-Con

• Aal2If BwPool Path AtmCon

•

161


Parameters:

bandwidthElastic


Domain

Description This attribute is only of importance for connectionswhich are carried on a link with a variable band-width. For example, the bandwidth may be reducedin the event that one or more physical links in theIMA group fail, such that the originally requestedbandwidth cannot be maintained. This attributeshows whether the application running on this con-nection can continue to operate if the bandwidth isreduced. If the bandwidth is reduced, the amount bywhich it is reduced will be displayed in the bandwid-thReduction attribute. A value of yes, indicates thatthis connection is elastic, and the bandwidth maybe reduced but the connection will not be released.Currently, this attribute should only be set to yes forsituations where this Nrp is functioning as a loop-back on one side of an IMA link. There are no othersituations where this setting is valid. A value of noindicates that the bandwidth for this connection willnot be reduced in the event of link bandwidth reduc-tion. However, this connection may be releasedbased on its holdingPriority.

Class NA

Presence required

Visibility customer

Range no, yes


Initial value no

nextHop

Parameter name nextHop

Domain

Description This attribute specifies the Nrp component withwhich this Nrp is associated. A sample value is At-mIf/31 Vcc/0.32 Nrp.

Class NA

Presence required

162


Visibility customer

Range Ss7 SaalNni AtmCon, AtmMpe Ac AtmCon, AtmIfVpt Vcc Nrp, AtmIf Vcc Nrp, AtmIf Vpc Nrp, ARtgPnni CfgNode Rcc AtmCon, IpIf BwPool Path Atm-Con, Iub Sig SaalUni AtmCon, Aal2If Alcap SaalUniAtmCon, Aal2If BwPool Path AtmCon, Aal2If PathAtmCon


Initial value N.A.

oamSegmentBoundary

Parameter name oamSegmentBoundary

Domain

Description This attribute specifies the OAM segment boundarydesired for a Nrp component. It affects the connec-tion point type value visible in the parent compon-ent's connectionPointType attribute. The desiredOAM segment boundary can be specified directlyas yes, no or sameAsInterface. If sameAsInterfaceis specified, the OAM segment boundary is sameas the oamSegmentBoundary attribute of the asso-ciated AtmIf and the switch will set the connection-PointType, choosing segmentEndPoint for a seg-ment- boundary ATM interface and connectingPointfor a non-segment- boundary ATM interface.

Class NA

Presence required

Visibility customer

Range no, yes, sameAsInterface


Initial value sameAsInterface

overrideHoldingPriority

Parameter name overrideHoldingPriority

Domain

Description This attribute specifies the holding priority of thisconnection. Holding priority is used when there isan IMA group where some physical links havefailed. Holding priority determines the order in whichconnections are released. 4 is the lowest holdingpriority and is released first. 0 is a higher priorityand is released last. The value specified in this at-

163


tribute will override whatever holdingPriority thathas been provisioned at the Vcd (or Vpd). If thevalue is left at the default of noOverride, the hold-ingPriority provisioned at the Vcd (or Vpd) will beused.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4, noOverride


Initial value noOverride

164


39 AtmNonRealTimeVariableBitRate (NrtVbr)





• Verbs: add,

Parents:

EM - AtmIf - CA - NrtVbr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n CA NonRealTimeVariableBitRate/n Thiscomponent manages the default characteristics ofthe non-real- time variable bit rate (nrt-VBR) servicecategory.

Class NA

Presence required

Visibility customer

Unit

165


Range [0..0]

Data Type Decimal

Initial Value

cdvt

Parameter name cdvt

Domain

Description This attribute specifies the default cell delay vari-ation tolerance (CDVT) for all connections of thenrt-VBR service category (including connectionsmanaged by a Vpt CA). An override to this defaultmay be specified for a provisioned connection un-der the Vcd Tm or Vpd Tm component. If UsageParameter Control (UPC) is enabled for a connec-tion, CDVT is used by the UPC function to decidewhether a cell is conforming or non-conformingbased on the connection's traffic descriptor type.The larger the CDVT value, the more tolerant is theUPC of bandwidth usage beyond the traffic con-tract.

Class NA

Presence required

Visibility customer

Range [1..1200000]

Data type Decimal

Initial value 250

cellLossRatio


Domain

Description This attribute specifies the tolerable cell loss ratio(CLR) for nrt- VBR traffic (excluding connectionsmanaged by a Vpt CA). The value specified is thenegative base 10 logarithm of the CLR. For ex-ample, if the target CLR = 1E-10 then the value ofthe cellLossRatio attribute is 10. The value if this at-tribute must be less than or equal to the value of theRtVbr cellLossRatio attribute since rt-VBR traffichas a higher discard priority. This attribute is usedby the Connection Admission Control (CAC) al-gorithm to compute the equivalent cell rate (ECR)required for nrt-VBR connections. There is a trade-

166


off between the service category CLR and theachievable link utilization. To guarantee an excel-lent service category, the CLR should be as smallas possible (for example, 1E- 10). However, a smal-ler CLR results in a larger equivalent cell rate for agiven connection and hence a lower link utilization.A value of anyClrValue means that no bandwidth isreserved for nrt-VBR connections and CAC is ef-fectively turned off. All nrt- VBR connections are ad-mitted.

Class NA

Presence required

Visibility customer



Initial value 7

emissionPriority


Domain

Description This attribute specifies the emission priority (EP)which is used to transmit traffic of the nrt-VBR ser-vice category. A lower numerical value for this at-tribute specifies a higher emission priority. 0 is thehighest EP and 7 is the lowest. Cells at a higheremission priority receive higher preference for linkbandwidth. EP 0 and EP 1 are in the absolute prior-ity range and are unaffected by any minimum band-width guarantees. EP 2 through EP 7 are in theguaranteed bandwidth range and may achieve apriority which is different from the strict hierarchicalpriority, if a minimum bandwidth guarantee is provi-sioned. A minimum bandwidth guarantee is spe-cified in the AtmIf/n Ep/m component. This attributedoes not apply to basic VPTs, or standard VptVCCs. This attribute is not applicable and is ignoredfor 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, and 1pOC12SmLrAtm cards, emission pri-ority setting must comply with all of the followingconstraints: 1. The emission priority numbers must

167


be in the following order: CBR <= rt-VBR <= nrt-VBR <= ABR <= UBR 2. Two different ATM servicecategories may share the same EP only if they areboth shaped. 3. CBR and rt-VBR may be placedeither in the absolute priority range (EP 0 or 1) or inthe guaranteed bandwidth range (EP 2 through 7).4. If both CBR and rt-VBR are shaped, rt-VBR mustshare the same EP with CBR or ABR. If either oneof CBR or rt-VBR are not shaped, then they cannotshare the same EP. 5. ABR service category is al-ways deemed to be shaped. If nrt-VBR is shaped, itmust share the same EP with ABR. If nrt-VBR is notshaped it must have a higher EP than ABR. 6. IfUBR is shaped, it must share the same EP withABR. If UBR is not shaped, it must have a lower EPthan ABR. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards, emission priority set-ting must comply with all of the following con-straints: 1. The emission priority numbers must bein the following order: CBR <= rt-VBR <= nrt-VBR<= UBR 2. Two different ATM service categoriesmay share the same EP only if they are bothshaped. 3. EP 0 must be used if traffic shaping isrequired. 4. EP 5 and EP 6 are not supported. For16pOC3PosAtm and 4pMRPosAtm cards, emissionpriority setting must comply with all of the followingconstraints: 1. The emission priority numbers mustbe in the following order: CBR <= rt-VBR <= nrt-VBR <= UBR 2. Two different ATM service categor-ies may share the same EP only if they are bothshaped. For 1pOC48ChSmIrAtm cards, only the de-fault value is supported.

Class NA

Presence optional

Visibility customer

Range [0..7]

Data type Decimal

Initial value 4

forceTagging


Domain

Description This attribute specifies the default force tagging(CLP=1) value of all cells for nrt-VBR permanentconnections. An override to this default may be spe-cified for a provisioned connection under the Vcd

168


Tm or Vpd Tm component. A value of enabledmeans CLP is set to 1 for all cells. A value of dis-abled means CLP is unchanged for all cells. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, force tagging applies tocells in the receive direction. For all other cards,force tagging applies to cells in the transmit direc-tion. This attribute does not apply to any type of Vptcomponent. This attribute does not apply toswitched nrt-VBR connections. This attribute is notapplicable and is ignored for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm, and1pOC48ChSmIrAtm cards.

Class NA

Presence required

Visibility customer




holdingPriority


Domain

Description This attribute specifies the default holding prioritywhich applies to SVP and SVC nrt-VBR connec-tions. It takes a value from 0 (highest priority) to 4(lowest priority). In a situation where the link band-width fluctuates, such as over an IMA link, holdingpriority is used to determine which connections areheld and which are released. Holding priority 4 con-nections are the first to be released. Holding priority0 connections are the last to be released. This at-tribute does not apply to Vpt VCCs. When band-width fluctuates, the entire Vpt, along with all VptVCCs, is released as a unit, according to the Vpt'sholdingPriority.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 3

169


minPerVcQueueLimit


Domain

Description This attribute specifies the minimum queue limit forthe per-VC queues of connections of the nrt-VBRservice category. This attribute is ignored for1pOC12SmLrAtm cards, because they do not sup-port per-VC queues for the nrt-VBR service cat-egory. The queue limit of a per-VC queue is ob-tained by scaling down the txQueueLimit attributebased on the shaping rate of that queue (shapingrate for the connection and for standard Vpt VCCs,the shaping rate of the Vpt). This produces a con-stant delay for various queue lengths. The value ofthe txQueueLimit attribute provides an upper boundwhile the value of the minPerVcQueueLimit attributeprovides the lower bound. The value of this attributemust not be greater than the value of thetxQueueLimit attribute. If this service category isused by Trunks, the value of the minPerVc-QueueLimit attribute must be at least 88. This attrib-ute is used as the default minPerVcQueueLimit forall standard VPTs, regardless of the Vpt's servicecategory. This attribute does not apply to basicVPTs. For 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, and 2pJ6MAtm cards, thisattribute must be set to the same value for CANrtVbr, Abr and Ubr components. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, and 1pOC48ChSmIrAtm cards, the validrange for this attribute is from 5 to 160000 inclusive.For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, the valid range for this at-tribute is from 43 to 512000 inclusive. For16pOC3PosAtm cards, the valid range for this at-tribute is from 32 to 261120 inclusive. For4pMRPosAtm cards, the valid range for this attrib-ute is from 32 to 1011840 inclusive.

Class NA

Presence required

Visibility customer

Range [5..1011840]

Data type Decimal

170


Initial value 88



Domain

Description This attribute specifies the shaping rate to be usedin computing the tolerable delay for per-VC queuesof connections of the nrt-VBR service category. Thedelay is computed as the txQueueLimit divided bythe value of this attribute. This attribute is ignoredfor 1pOC12SmLrAtm and 1pOC48ChSmIrAtmcards, because they do not support traffic shapingfor the nrt-VBR service category. A value of auto-Configure means an appropriate value is selectedbased on the card type. For 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, 2pJ6MAtm, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch and4pDS3ChAtm cards, the value is 3685. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm, and3pDS3Atm cards, the value is 14740. For3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,4pOC3MmAtm, 4pOC3SmIrAtm, 16pOC3SmIrAtm,and 16pOC3PosAtm cards, the value is 65511. ForMSA32 cards, the value is 65511 for OC-3 chan-nels, and 3685 for DS1, or E1 channels. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and4pMRPosAtm cards, the value is 262044. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, this attributemust be set to the same value for CA NrtVbr, Abr,and Ubr components. For 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards themaximum value is 1416905. For 16pOC3PosAtmcards, the maximum value is 353207. For4pMRPosAtm cards, the maximum value is1412830 for OC-12 ports and 5651320 for OC- 48ports. For all other cards, the maximum value is943396. This attribute is used as the default perVc-QueueLimitReferenceRate for all standard VPTs,regardless of the Vpt's service category. This attrib-ute does not apply to basic VPTs.

Class NA

Presence required

Visibility customer


171




pool

Parameter name pool

Domain

Description This attribute specifies the bandwidth pool which isto be used to support the non-real-time variable bitrate (nrt-VBR) service category (excluding connec-tions managed by a Vpt CA). The percentage of linkcapacity reserved for the given bandwidth pool isthe maximum bandwidth that can be allocated tonrt-VBR traffic. The percentage allocated to eachbandwidth pool can be provisioned through thebandwidthPool attribute of the CA component.

Class NA

Presence required

Visibility customer



Initial value pool1



Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming cells for nrt-VBR ser-vice category. If the count of discarded incomingnrt-VBR cells is greater than the provisioned valueof this attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedincoming nrt-VBR cells is still greater than the provi-sioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded incoming nrt-VBR cells dropsbelow the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded incoming nrt-VBR cellsare not monitored and no alarm is generated. Whilethe alarm is set, if the value of this attribute ischanged, the alarm is cleared. This attribute is notapplicable for 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,

172


8pE1Atm, 8pDS1Atm and 2pJ6MAtm cards. Thisattribute is not applicable for 4pOC12SmIrAtm and4pOC12SmLrAtm cards when channelized.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0



Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming frames for nrt-VBRservice category. If the count of discarded incomingnrt-VBR frames is greater than the provisionedvalue of this attribute in a 15 minute interval, thealarm is set. While the alarm is set, if the count ofdiscarded incoming nrt-VBR frames is still greaterthan the provisioned value of this attribute in thesubsequent 15 minute intervals, the alarm is not setagain. If the count of discarded incoming nrt-VBRframes drops below the provisioned value of this at-tribute in a 15 minute interval the alarm is cleared.Provisioned value of '0' means discarded incomingnrt-VBR frames are not monitored and no alarm isgenerated. While the alarm is set, if the value of thisattribute is changed, the alarm is cleared. This at-tribute is not applicable for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

shapeRecoupPolicy

173



Domain

Description This attribute specifies the shaping recoup policy forthe nrt-VBR service category. This is the policywhich is used to recoup shaping opportunitieswhich are lost when more than one connectionschedules a cell for the same transmit opportunity.In this case, one connection is scheduled and thecell from the other connection is delayed by one celltime. This attribute affects how the transmit time iscalculated for the next cell on the delayed connec-tion. This attribute is ignored if this service categoryis not shaped. This attribute does not apply to basicVPTs, or standard Vpt VCCs. This attribute is notapplicable and is ignored for 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards.When the connection which was delayed schedulesthe next cell to transmit, it may calculate the time asa difference from either the previous actual celltransmit time, or the time when the previous cellshould have been transmitted. A value of maxim-umEfficiency results in each connection trying to re-coup or regain any delays in scheduling. The trans-mit time for the next cell is calculated from the timewhen the previous cell should originally have beensent. Cell delay variation (CDV) occurs in this casesince the cells are sent with less than the shapingdelay between them. However, in general theshaper recovers (recoups) lost opportunities andimproves efficiency. A value of minimumCdv resultsin connections not trying to recoup or regain anydelays in scheduling. The transmit time for the nextcell is calculated from the time when the previouscell was actually transmitted. This minimizes CDV,but results in missed cell opportunities.

Class NA

Presence required

Visibility customer



Initial value maximumEfficiency



Domain

174


Description This attribute specifies the default holding prioritywhich applies to SVC nrt-VBR point-to-multipointconnections. It takes a value from 0 (highest prior-ity) to 4 (lowest priority). In a situation where the linkbandwidth fluctuates, such as over an IMA link,holding priority is used to determine which connec-tions are held and which are released. Holding pri-ority 4 connections are the first to be released.Holding priority 0 connections are the last to be re-leased. This attribute does not apply to Vpt VCCs.When bandwidth fluctuates, the entire Vpt compon-ent, along with all Vpt VCCs, is released as a unit,according to the Vpt's holdingPriority.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 3

trafficShaping


Domain

Description This attribute specifies the default traffic shapingoption for connections of the nrt-VBR service cat-egory. An override to this default may be specifiedfor a provisioned connection under the Vcd Tm orVpd Tm component. This attribute does not apply tobasic VPTs, or standard Vpt VCCs. A value of dis-abled means traffic shaping cannot be enabled forany nrt-VBR connections. For 1pOC12SmLrAtmand 1pOC48ChSmIrAtm cards, the value of this at-tribute must be disabled since traffic shaping is notsupported for nrt-VBR connections on these cards.For 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, the value of thisattribute may be enabled only if the interface sup-ports shaping, as defined by the perVcQueueInter-faces attribute of the Lp Eng Arc Cqc Ov compon-ent. If that component does not exist, the value ofthis attribute must be disabled. If the Vcc Tm, VpcTm, or Vpt Tm txTrafficDescType attribute indicatestype 1 or 2, this attribute is ignored and traffic shap-ing is not applicable for that connection. A value ofinverseUpc means traffic shaping for a connection

175


is enabled according to the value of the Vcc Tm,Vpc Tm, or Vpt Tm txTrafficDescType attribute. Avalue of inverseUpc when the txTrafficDescType is3, 4, or 5, means linear traffic shaping is enabled.Linear traffic shaping uses a single static trafficshaping rate. A value of inverseUpc when the tx-TrafficDescType is 6, 7, or 8, means inverse-UPC(also referred to as VBR or dual leaky bucket) trafficshaping is enabled. Inverse-UPC traffic shaping canburst above the sustained cell rate to the peak cellrate for the duration defined by the maximum burstsize. Inverse-UPC traffic shaping exactly conformsto the requirements of a dual leaky bucket UPC en-forcer. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards, the value inverseUpcis not available. For 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, and 2pJ6MAtm cards, thevalue inverseUpc is not supported and is equivalentto the value enabled. A value of enabled when thetxTrafficDescType is 3, 4, 5, 6, 7, or 8, means trafficshaping for a connection is enabled using linearshaping. Enabling or disabling traffic shaping mayrequire a matching change to the emissionPriorityattribute, and the unshapedTransmitQueueing at-tribute for this service category. Refer to those at-tributes for the complete description of the interac-tions.

Class NA

Presence required

Visibility customer






Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing cells for nrt-VBR ser-vice category. If the count of discarded outgoing nrt-VBR cells is greater than the provisioned value ofthis attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedoutgoing nrt-VBR cells is still greater than the provi-sioned value of this attribute in the subsequent 15

176


minute intervals, the alarm is not set again. If thecount of discarded outgoing nrt-VBR cells drops be-low the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded outgoing nrt-VBR cellsare not monitored and no alarm is generated. Whilethe alarm is set, if the value of this attribute ischanged, the alarm is cleared. This attribute is notapplicable for 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm and 2pJ6MAtm cards. Thisattribute is not applicable for 4pOC12SmIrAtm and4pOC12SmLrAtm cards when channelized.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0



Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing frames for nrt-VBRservice category. If the count of discarded outgoingnrt-VBR frames is greater than the provisionedvalue of this attribute in a 15 minute interval, thealarm is set. While the alarm is set, if the count ofdiscarded outgoing nrt-VBR frames is still greaterthan the provisioned value of this attribute in thesubsequent 15 minute intervals, the alarm is not setagain. If the count of discarded outgoing nrt-VBRframes drops below the provisioned value of this at-tribute in a 15 minute interval the alarm is cleared.Provisioned value of '0' means discarded outgoingnrt-VBR frames are not monitored and no alarm isgenerated. While the alarm is set, if the value of thisattribute is changed, the alarm is cleared. This at-tribute is not applicable for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards.

Class NA

177


Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

txQueueLimit


Domain

Description This attribute specifies the default maximum queuelength for the emission queues used to buffer thetraffic of the nrt-VBR service category. It is used asthe basis for setting both the queue length and thediscard thresholds on both common and per-VCqueues. For the common queue, the discardthresholds are set at approximately 35, 75, and 90percent of the value of this attribute for traffic at dis-card priority 3 (DP=3), DP=2, and DP=1 respect-ively. For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, common queuing is notavailable for the nrt-VBR service category. For aper-VC queue, the actual queue length may be re-duced depending on the shaping rate of the con-nection (for standard Vpt VCCs, this is the shapingrate of the Vpt). The discard thresholds are set atapproximately 35, 75, and 90 percent of the scaledqueue limit for traffic at discard priority 3 (DP=3),DP=2, and DP=1 respectively. However, a reduc-tion will never result in a value that is less than thevalue of the minPerVcQueueLimit attribute. Theper- VC queue limit may be overridden for a per-manent connection by specifying a value in the VcdTm or Vpd Tm txQueueLimit attribute. For1pOC12SmLrAtm and 1pOC48ChSmIrAtm cards,per-VC queues are not available for the nrt-VBRservice category. For 1pOC48ChSmIrAtm cards,this attribute is used to set the maximum size of thelink-class queue for buffering the egress traffic ofthe nrt-VBR service category. This is similar to com-mon queuing, except that each nrt-VBR connectionmaintains a per-VC utilization limit of the commonqueue specified for a provisioned connection by theVcd Tm or Vpd Tm txQueueLimit attribute. A valueof autoConfigure means an appropriate value is se-lected based on the card type. For 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch

178


and 4pDS3ChAtm cards, the value is 1792. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm, and3pDS3Atm cards, the value is 2304. For3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,4pOC3MmAtm, 4pOC3SmIrAtm, 4pOC12SmIrAtm,4pOC12SmLrAtm, 16pOC3SmIrAtm, and16pOC3PosAtm cards, the value is 10240. ForMSA32 cards, the value is 10240 for OC-3 chan-nels, and 1792 for DS1, or E1 channels. For4pMRPosAtm cards, the value is 40960. For1pOC12SmLrAtm cards, the value is 7680. For1pOC48ChSmIrAtm cards, the value is 118784.The operational value of the maximum length of aqueue (common or per-VC) is indicated by the VccTm, Vpc Tm, or Vpt Tm txQueueThresholds attrib-ute. When using per-VC queuing, this attribute isused as the default txQueueLimit for all standardVPTs, regardless of the Vpt's service category. Thisattribute does not apply to basic VPTs. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, this attributemust be set to the same value for CA NrtVbr, Abrand Ubr components and the valid range is from 5to 30000 inclusive. For 2pOC3MmAtm2,2pOC3SmAtm2, 2pSTM1eAtm, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch, 4pOC3MmAtm,4pOC3SmIrAtm, 4pDS3ChAtm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm, MSA32,1pOC12SmLrAtm, and 1pOC48ChSmIrAtm cards,the valid range for this attribute is from 5 to 160000inclusive. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards, the valid range for thisattribute is from 5 to 512000 inclusive. For16pOC3PosAtm cards, the valid range for this at-tribute is from 32 to 261120 inclusive. For4pMRPosAtm cards, the valid range for this attrib-ute is from 32 to 1011840 inclusive.

Class NA

Presence required

Visibility customer





179



Domain

Description This attribute specifies the default queuing optionfor unshaped connections of the nrt-VBR servicecategory. This attribute controls whether commonor per-VC queuing is used. A value of perVc meansthat each connection has its own buffering andqueue limits. A value of common means that cellsare queued in First In First Out order on a commonqueue for this service category. The commonqueue has one set of congestion control levels forall cells enqueued on it. This attribute does not ap-ply to basic VPTs, or standard Vpt VCCs. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, if the perVc-QueueInterfaces attribute of the Lp Eng Arc Cqc Ovcomponent permits shaping for this interface, thenthis attribute may take any of the three values. Inthis case, the value autoConfigure is interpreted tomean per-VC queuing. If the perVcQueueInterfacesattribute of the Lp Eng Arc Cqc Ov component doesnot permit shaping for this interface, then this attrib-ute may take the values common, or autoConfigure.In this case, the value autoConfigure is interpretedto mean common queuing. An override to this de-fault may be specified for a provisioned connectionunder the Vcd Tm, or Vpd Tm component. There isone common queue which is shared by the nrt-VBR, ABR, and UBR service categories. For1pOC12SmLrAtm and 1pOC48ChSmIrAtm cards,the value perVc is not supported since these cardsdo not support per-VC queuing. The value autoCon-figure is interpreted to mean common queuing. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, the value common is notsupported since these cards do not support com-mon queuing. The value autoConfigure is inter-preted to mean per-VC queuing. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, 16pOC3PosAtm, and 4pMRPosAtm cards,if traffic shaping for this service category is dis-abled, this attribute may take any of the three val-ues. In this case, the value autoConfigure is inter-preted to mean per-VC queuing. If traffic shapingfor this service category is not disabled, the onlypermitted values are perVc and autoConfigure. In

180


this case, the value autoConfigure is interpreted tomean per-VC queuing. For 16pOC3PosAtm and4pMRPosAtm cards, no more than 32,000 connec-tions on the FP can use per-VC queuing. The re-maining connections must use common queuing.The Lp Eng Arc perVcQueueUsage attribute indic-ates the number per-VC queues that are currentlyin use. The value of the operational opUn-shapedTransmitQueueing attribute of this compon-ent indicates whether the transmit queuing is perVcor common.

Class NA

Presence required

Visibility customer

Range perVc, common, autoConfigure





Domain

Description This attribute specifies the default usage parametercontrol (UPC) option for connections of the nrt-VBRservice category. This attribute is ignored if the rx-TrafficDescriptorType indicates 1 or 2. An overrideto this default may be specified for a provisionedconnection under the Vcd Tm or Vpd Tm compon-ent. A value of enforced means UPC is enforced foreach connection. When UPC is enforced, non-conforming cells are either tagged or discarded de-pending on the rxTrafficDescriptorType. A value ofmonitored means UPC conformance checking isperformed, except, instead of the non-conformingcells being tagged or discarded, they are merelycounted in the UPC violations counts and passedon unchanged. A value of disabled means UPC isdisabled on the receive path for all rt-VBR connec-tions. This attribute does not apply to basic VPTs,or standard Vpt VCCs. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, and 2pJ6MAtmcards, the value monitored is not supported. Thisvalue has the same effect as disabled. For1pOC48ChSmIrAtm cards, the value of this attrib-ute must be disabled.

Class NA

181


Presence required

Visibility customer




weightPolicy


Domain

Description This attribute specifies the policy which is appliedwhen calculating the fairness weight for unshapedconnections of the nrt-VBR service category. Thefairness weight for a connection determines the rel-ative amount of bandwidth which that connectionobtains, compared to other connections in the sameservice category. Connections with equal weight getequal transmit opportunities. Connections with high-er weights get more transmit opportunities com-pared with connections that have lower weights. Anoverride to this default may be specified for a provi-sioned connection under the Vcd Tm or Vpd Tmcomponent. The fairness weight for a connection isdirectly proportional to the value of one of the trafficdescriptor parameters for that connection. This at-tribute specifies which traffic descriptor parameter isused for connections of the nrt-VBR service cat-egory. A value of scr means the fairness weight isproportional to the transmit sustained cell rate(SCR) of a connection. Connections with a higherSCR have a higher fairness weight. For connec-tions with txTrafficDescType 3, which have no SCR,the sustained cell rate is assumed to be equal tothe peak cell rate. A value of pcr means the fairnessweight is proportional to the transmit peak cell rate(PCR) of a connection. Connections with a higherPCR have a higher fairness weight. Connectionswith txTrafficDescType 1 or 2 get a minimumweight, which is 1. A value of ecr means the fair-ness weight is proportional to the equivalent cellrate (ECR) of a connection as calculated by con-nection admission control (CAC). Connections witha higher ECR have a higher fairness weight. Con-nections with an ECR of 0 get a minimum weight,which is 1. The weight of a connection is visible inthe Vcc Tm, Vpc Tm, or Vpt Tm weight attribute.This attribute does not apply to basic VPTs andstandard Vpt VCCs. This attribute is ignored if the

182


value of the unshapedTransmitQueueing attribute iscommon. This attribute is not applicable and is ig-nored for 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, 1pOC12SmLrAtm, and1pOC48ChSmIrAtm cards.

Class NA

Presence required

Visibility customer

Range scr, pcr, ecr


Initial value ecr

183


40 AtmPnni (Pnni)






Parents:

EM - ARtg - Pnni

Child(ren):

Cache - CfgNode - Lb - Node -

Identifiers:

-

Links:


Parameters:

avcrMt


Domain

Description This attribute multiplied by the Maximum Cell Ratespecifies the minimum threshold used in the al-gorithms that determine significant change for aver-age cell rate parameters.

Class NA

Presence required

Visibility customer

Range [1..99]

Data type Decimal

Initial value 3

184


avcrPm


Domain

Description This attribute multiplied by the current Available CellRate specifies the threshold used in the algorithmsthat determine significant change for AvCR para-meters. If the resulting threshold is lower than theminimum threshold, the minimum threshold is used.Increasing the value of this attribute increases therange of insignificance and reduces the amount ofPTSP flooding due to changes in resource availabil-ity.

Class NA

Presence required

Visibility customer

Range [1..99]

Data type Decimal

Initial value 50

cdvPm

Parameter name cdvPm

Domain

Description This attribute specifies the proportional multiplierused in the algorithms that determine significantchange for CDV metrics. Increasing the value ofthis attribute increases the range of insignificanceand reduces the amount of PTSP flooding due tochanges in resource availability.

Class NA

Presence required

Visibility customer

Range [1..99]

Data type Decimal

Initial value 25

ctdPm

Parameter name ctdPm

Domain

185


Description This attribute specifies the proportional multiplierused in the algorithms that determine significantchange for CTD metrics. Increasing the value of theattribute increases the range of insignificance andreduces the amount of PTSP flooding due tochanges in resource availability.

Class NA

Presence required

Visibility customer

Range [1..99]

Data type Decimal

Initial value 50

defaultScope

Parameter name defaultScope

Domain

Description This attribute specifies the default PNNI scope forATM addresses associated with this node. ThePNNI scope determines the level to which the ad-dress is advertised within the PNNI routing domain.A provisioned Addr component may override thedefault scope in a PnniInfo subcomponent. The de-faultScope can't be used for default address advert-izement unless the prefix of the default address isdifferent from that of the node address. A value of 0means that all addresses which do not have provi-sioned scopes is advertised globally within thePNNI routing domain. The value specified must benumerically smaller than or equal to that of the low-est level at which this node is configured in thePNNI hierarchy.

Class NA

Presence required

Visibility customer

Range [0..104]

Data type Decimal

Initial value 0

domain

Parameter name domain

Domain

186


Description This attribute specifies the routing domain name.This attribute should be set identically for all nodesin the same routing domain.

Class NA

Presence required

Visibility customer

Range [1..32]


Initial value 1

helloHoldDown


Domain

Description This attribute specifies the rate at which this nodesends out Hello packets. It specifies the defaultminimum length of time between successive Hellosused by routing control channels on this node. Aprovisioning check is made to ensure that this valuecannot be greater than helloInterval. The value canbe overridden on a per interface or per VPT basisby changing the Atmif Pnni Rcc or Atmif Vpt PnniRcc helloHoldDown attribute.

Class NA

Presence required

Visibility customer

Range [0.1..65535.0]

Data type Decimal

Initial value 1.0



Domain

Description This attribute specifies the number of Hello intervalsallowed to pass without receiving a Hello from aneighbor, before an attempt is made to re-stage theRCC to that neighbor. The hello inactivity timer isenabled if the helloState of the RCC component isoneWayInside, twoWayInside, oneWayOutside,twoWayOutside or commonOutside. The value canbe overridden on a per interface or per VPT basisby changing the Atmif Pnni Rcc or Atmif Vpt Pnni

187


Rcc helloInactivityFactor attribute.

Class NA

Presence required

Visibility customer

Range [1..65535]

Data type Decimal

Initial value 5

helloInterval


Domain

Description This attribute specifies the default duration of theHello Timer for routing control channels on thisnode. Every helloInterval seconds, this node sendsout a Hello packet to the neighbor node, subject tothe helloHoldDown timer having expired at leastonce since the last Hello packet was sent. A provi-sioning check is made to ensure that this value can-not be less than helloHoldDown. The value can beoverridden on a per interface or per VPT basis bychanging the Atmif Pnni Rcc or Atmif Vpt Pnni RcchelloInterval attribute.

Class NA

Presence required

Visibility customer

Range [1..65535]

Data type Decimal

Initial value 15

horizontalLinkInactivityTime

Parameter name horizontalLinkInactivityTime

Domain

Description This attribute specifies the length of time a nodecontinues to advertise a horizontal (logical) link forwhich it has not received an LGN Horizontal Link In-formation Group. Increasing this timer allows thelink to increase tolerance of Information Grouppacket loses, but also increases the duration of ad-vertising a stale link. Decreasing the timer has thereverse effect.

188


Class NA

Presence required

Visibility customer

Range [30..3600]

Data type Decimal

Initial value 120

maxAlternateRoutesOnCrankback

Parameter name maxAlternateRoutesOnCrankback

Domain

Description This attribute specifies the number of rerouting at-tempts before a call requiring crank-back is rejec-ted.

Class NA

Presence required

Visibility customer

Range [0..20]

Data type Decimal

Initial value 1

nodeAddressPrefix

Parameter name nodeAddressPrefix

Domain

Description This attribute specifies the ATM address prefix ofthis node for all levels of the hierarchy. If this attrib-ute is set to the null string, then a default node ad-dress prefix is computed as follows: the value provi-sioned for the ModuleData component's nodePrefixattribute, followed by a unique MAC address (6 oct-ets). If a value is assigned, it must be exactly 38characters long. All characters must be hexadecim-al with the following restrictions: - the first two char-acters must be a number between 10 and FE, in-clusive. - if the first two characters are'45', the 18thcharacter must be an 'F' or an 'f'.

Class NA

Presence required

Visibility customer

Range [0..38]

189


Data type HexString

Initial value

optimizationMetric

Parameter name optimizationMetric

Domain

Description This attribute is a vector that specifies the optimiza-tion metric for each ATM service category. The op-timization metric is used during Generic ConnectionAdmission Control (GCAC) route computation. Set-ting the value to cdv for a particular service cat-egory causes GCAC to optimize for cell delay vari-ation on call setups requiring that service category.Setting the value to maxCtd for a particular servicecategory causes GCAC to optimize for maximumcell transfer delay on call setups requiring that ser-vice category. Setting the value to aw for a particu-lar service category causes GCAC to optimize foradministrative weight on call setups requiring thatservice category.

Class NA

Presence required

Visibility customer

Range cdv, maxCtd, aw

Data type Fixed[cbr,rtVbr,nrtVbr,ubr] List of Enumeration

Initial value aw,aw,aw,aw

outgoingNcciIeFormat

Parameter name outgoingNcciIeFormat

Domain

Description This attribute specifies the Network Call CorrelationIdentifier (NCCI) IE format in outgoing SETUP mes-sages for all PNNI interfaces on this node. back-wardsCompatible inserts two IEs: the Nortel Net-works proprietary 0xF0 NCCI IE format and theATM Forum standard 0xEF NCCI IE format. TheNortel Networks Multiservice Switch is able to differ-entiate the 0xF0 MDCR IE from 0xF0 NCCI IEwhen it receives a setup message. backwardsCom-patible should be selected if any node within thenetwork is not running the software release contain-ing this outgoingNcciIeFormat attribute, which wasintroduced in PCR4.2 software. atmForum selects

190


the ATM Forum0xEF NCCI IE format. atmForumshould only be selected if all nodes within the net-work have been upgraded to the software releasecontaining this outgoingNcciIeFormat attribute.

Class NA

Presence optional

Visibility customer

Range backwardsCompatible, atmForum


Initial value N.A.

overrideDelay

Parameter name overrideDelay

Domain

Description This attribute specifies how long a node waits for it-self to be declared the preferred peer group leaderby unanimous agreement among its peers. Ontimeout, if the node receives 2/3 majority, it de-clares itself as leader; otherwise, election enters theHungElection state.

Class NA

Presence required

Visibility customer

Range [1..65535]

Data type Decimal

Initial value 30

pathDiversity

Parameter name pathDiversity

Domain

Description This attribute specifies, as a percentage, how di-verse the alternate paths should be relative to eachother. For example, diversity degree of 60% meansthat the alternate paths have at least 60% of theirlinks distinct. Setting this attribute to 0 means thatall alternate paths are accepted.

Class NA

Presence required

Visibility customer

191


Range [0..100]

Data type Decimal

Initial value 50

peerDelayedAckInterval

Parameter name peerDelayedAckInterval

Domain

Description This attribute specifies the minimum length of timebetween transmissions of delayed PTSE acknow-ledgment packets.

Class NA

Presence required

Visibility customer

Range [0.1..65535.0]

Data type Decimal

Initial value 1.0

pglInitTime

Parameter name pglInitTime

Domain

Description This attribute specifies how long this node delaysadvertising its choice of preferred peer group leaderafter having reached the full peer state with at leastone neighbor in the peer group. Increasing thistimer allows the node to be more informed beforechoosing a leader, thus fewer rounds of electionsare required, but more time is required for eachround of election.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 15

ptseHoldDown

Parameter name ptseHoldDown

192


Domain

Description This attribute is used to limit the rate at which thisnode sends out PTSE packets. It specifies the min-imum length of time that this node must waitbetween sending successive PTSE packets. Thevalue of this attribute is constraint by the equation:ptseHoldDown * 2 < ptseRefreshInterval * ptseLife-timeFactor.

Class NA

Presence required

Visibility customer

Range [0.1..65535.0]

Data type Decimal

Initial value 1.0

ptseLifetimeFactor

Parameter name ptseLifetimeFactor

Domain

Description This attribute specifies the PTSE lifetime multiplier.The result of multiplying the ptseRefreshInterval bythis value is used as the initial lifetime that this nodeplaces into PTSEs. The value of this attribute isconstraint by the equation: ptseHoldDown * 2 <ptseRefreshInterval * ptseLifetimeFactor.

Class NA

Presence required

Visibility customer

Range [101..1000]

Data type Decimal

Initial value 200

ptseRefreshInterval

Parameter name ptseRefreshInterval

Domain

Description This attribute specifies the duration of the PTSETimer. Every ptseRefreshInterval seconds, thisnode sends out a self-originated PTSE packet tothe neighbor node, subject to the ptseHoldDowntimer having expired at least once since the lastPTSE packet was sent. The value of this attribute is

193


constraint by the equation: ptseHoldDown * 2 <ptseRefreshInterval * ptseLifetimeFactor.

Class NA

Presence required

Visibility customer

Range [300..65535]

Data type Decimal

Initial value 1800

reElectionInterval

Parameter name reElectionInterval

Domain

Description This attribute specifies how long this node waits,after losing connectivity to the current peer groupleader, before re-starting the process of electing anew peer group leader.

Class NA

Presence required

Visibility customer

Range [1..65535]

Data type Decimal

Initial value 15

requestRxmtInterval

Parameter name requestRxmtInterval

Domain

Description This attribute specifies the period between retrans-missions of unacknowledged Database Summarypackets, PTSE Request packets and PTSPs.

Class NA

Presence required

Visibility customer

Range [1..65535]

Data type Decimal

Initial value 5

svccCalledIntegrityTime

194


Parameter name svccCalledIntegrityTime

Domain

Description This attribute specifies the length of time this nodewaits for an SVCC to become fully established be-fore giving up and tearing it down. This conditionoccurs when the node has accepted the SVCCsetup as the called party.

Class NA

Presence required

Visibility customer

Range [25..3615]

Data type Decimal

Initial value 50

svccCallingIntegrityTime

Parameter name svccCallingIntegrityTime

Domain

Description This attribute specifies the length of time this nodewaits for an SVCC to become fully established be-fore giving up and tearing it down. The condition oc-curs when the node initiates establishment of theSVCC as the calling party.

Class NA

Presence required

Visibility customer

Range [10..3600]

Data type Decimal

Initial value 35

svccEstablishIntegrityTime

Parameter name svccEstablishIntegrityTime

Domain

Description This attribute specifies the length of time this nodewaits for an SVCC SETUP message from a neigh-bor, from which a SVCC SETUP message is expec-ted, once the node knows of the existence of thatneighbor. An alarm is raised when the svccEstab-lishIntegrityTimer expires.

Class NA

195


Presence required

Visibility customer

Range [15..3600]

Data type Decimal

Initial value 60

svccInitTime

Parameter name svccInitTime

Domain

Description This attribute specifies the default time this nodedelays initiating establishment of an SVCC to aneighbor after determining that such an SVCCshould be established.

Class NA

Presence required

Visibility customer

Range [0..120]

Data type Decimal

Initial value 4

svccRetryTime

Parameter name svccRetryTime

Domain

Description This attribute specifies the length of time this nodedelays before attempting to re-establish the SVCC-base RCC. This condition occurs when an RCCcannot be established, either during the initialsetup, or is unexpectedly torn down.

Class NA

Presence required

Visibility customer

Range [20..60]

Data type Decimal

Initial value 30

uniToPnniScopeMap

Parameter name uniToPnniScopeMap

196


Domain

Description This attribute specifies the mapping of the UNIscope into a PNNI routing level. The mapping ap-plies to the membership scope which is passedacross the UNI via ILMI address registration. ThePNNI routing level is then advertised along with thecorresponding reachable address. The mappingalso applies to the connection scope of an incomingSETUP message for Anycast call requests. ThePNNI routing level then specifies the routing rangefor the call. The table must be provisioned in des-cending order.

Class NA

Presence required

Visibility customer

Range [0..104]


Initial value 96,96,96,80,80,72,72,64,64,64,48,48,32,32,0

197


41 AtmPnniCache (Cache)






Parents:

EM - ARtg - Pnni - Cache

Child(ren):

-

Identifiers:

-

Links:


Parameters:

agingPeriod

Parameter name agingPeriod

Domain

Description This attribute specifies the maximum lifetime of aCache entry. Specifying a low agingPeriod is usefulwhen many SVCs are expected to be routedthrough the network to ensure that the Cache isperiodically refreshed. Specifying a high agingPeri-od is useful when many permanent connections areexpected to be routed through the network. As thefluctuations in the available network resources be-come more frequent, the value of agingPeriodshould be decreased to reflect the dynamic natureof the network.

Class NA

198


Presence required

Visibility customer

Range [180..7200]

Data type Decimal

Initial value 1800

maxNumEntries

Parameter name maxNumEntries

Domain

Description This attribute specifies the maximum number of thecache entries to be stored in the routing cache. Re-ducing the maxNumEntries below the currentCache size causes the Cache to shrink by purgingthe oldest entries. A larger value of maxNumEntriescauses more CP memory to be used. The value ofthis attribute is bound by the value of maxPaths ofArtg Pnni lb<srvCat> component and may not ex-ceed 30000/ maxPaths.

Class NA

Presence required

Visibility customer

Range [100..10000]

Data type Decimal

Initial value 5000

maxPathsToIntermediateNode

Parameter name maxPathsToIntermediateNode

Domain

Description This attribute specifies the maximum number ofequal cost paths that are kept to an intermediatenode during on-demand route computation. The de-fault value is 1. Setting this attribute to a valuegreater than 1 benefits customers who want to cal-culate more than 3 alternate paths to the destina-tion and store them in the cache. This helps themachieve better load balancing across their network.However, changing the default value to more than 1will degrade route calculation performance. Itshould only be changed from the default if recom-mended by Nortel Networks.

Class NA

199


Presence required

Visibility customer

Range [1..20]

Data type Decimal

Initial value 1

purgeEntryAtPathInvalid

Parameter name purgeEntryAtPathInvalid

Domain

Description This attribute specifies whether to purge the wholeroute cache entry when a path becomes invalid, orto remove only the invalid path. A route cache entryconsists of one or more paths and support calls ofcertain traffic requirements. A path becomes invalidif it can no longer support the traffic requirements ofthe associated route. This may happen if any linkalong the path fails, or its capacity is reduced. If thisattribute is set to yes, the whole route cache entrywill be purged after a path becomes invalid. If thisattribute is set to no, only the path will be removed.For most networks, it is desirable to purge thewhole route cache entry when one path becomesinvalid since this allows for better load balancing.However, for some network scenarios, this behavioris not desirable, because it may lead to many unne-cessary route cache purges at high network utiliza-tion. The default value of this attribute is yes. Itshould only be changed if recommended by NortelNetworks.

Class NA

Presence required

Visibility customer

Range no, yes


Initial value yes

200


42 AtmPnniInterface (Pnni)






Parents:

EM - AtmIf - Pnni

Child(ren):

Addr - Rcc - Sig -

Identifiers:

-

Links:


Parameters:

accountClass


Domain

Description This attribute specifies the accounting class associ-ated with the interface. Its meaning is determinedby the network operator. Its value is simply recor-ded in the accounting records generated by this in-terface, in the attribute callingServiceType or called-ServiceType as appropriate.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

201


Initial value 0

accountCollection


Domain

Description This attribute is used to turn accounting on or off forSVC and SPVC connections. It also specifies thereason(s) for which accounting data is collected:billing, test, study, audit, or force. If the set of reas-ons is not empty then accounting records will begenerated by this interface in the following situ-ations: - on a TODA changeover if TODA is en-abled; - every 12 hours (per connection) if TODA isdisabled; - on every call clear (a call record with fi-nal cell counts). If none of the reasons is present,then accounting will be suppressed. The reason forcollection is recorded in the accounting record, inthe attribute callingCollectReason or calledCol-lectReason as appropriate.

Class NA

Presence optional

Visibility customer


Data type Set of

Initial value



Domain

Description This attribute specifies whether accounting recordsgenerated by this interface should be marked asoriginating, terminating or intermediate. This attrib-ute, in combination with the direction of the call, de-termines the value of attribute connPointType of theaccounting record and may be used by downstreamaccounting processes to correlate the records. If thevalue is origTerm then records generated for incom-ing calls will be marked as originating and recordsgenerated for outgoing calls will be marked as ter-minating. If the value is intermediate then recordsgenerated for all calls will be marked as intermedi-ate.

Class NA

202


Presence required

Visibility customer



Initial value intermediate

avcrMt


Domain

Description This attribute, multiplied by the Maximum Cell Rate,specifies the minimum threshold used in the al-gorithms that determine significant change for aver-age cell rate parameters for this interface. If thevalue of this attribute is sameAsPnni, then the actu-al value is taken from ARtg Pnni avcrMt.

Class NA

Presence required

Visibility customer




avcrPm


Domain

Description This attribute multiplied by the current Available CellRate (AvCr) specifies the threshold used in the al-gorithms that determine significant change forAvCR parameters for this interface. If the resultingthreshold is lower than the AvCr, the minimumthreshold (Atmif pnni avcrMt) is used. Increasingthe value of the attribute increases the range of in-significance and reduces the amount of PTSPflooding due to changes in resource availability. Ifthe value of this attribute is sameAsPnni, then theactual value is taken from ARtg Pnni avcrPm. DE-SCRIPTION

Class NA

Presence required

Visibility customer

203





cbrWeight

Parameter name cbrWeight

Domain

Description This attribute specifies the administrative weight as-signed for setting up switched calls with a servicecategory of Constant Bit Rate (CBR) for this PNNIinterface. The value specified will be used by Gen-eric Connection Admission Control (GCAC) if ad-ministrative weight is the selected optimization cri-terion; the higher the value, the less desirable thelink will be in path selection.

Class NA

Presence required

Visibility customer

Range [1..16777215]

Data type Decimal

Initial value 5040

nrtVbrWeight

Parameter name nrtVbrWeight

Domain

Description This attribute specifies the administrative weight as-signed for setting up switched calls with a servicecategory of Non Real-Time Variable Bit Rate(NRT-VBR) for this PNNI interface. The value spe-cified will be used by Generic Connection Admis-sion Control (GCAC) if administrative weight is theselected optimization criterion; the higher the value,the less desirable the link will be in path selection.

Class NA

Presence required

Visibility customer

Range [1..16777215]

Data type Decimal

Initial value 5040

204


rtVbrWeight

Parameter name rtVbrWeight

Domain

Description This attribute specifies the administrative weight as-signed for setting up switched calls with a servicecategory of Real-Time Variable Bit Rate (RT-VBR)for this PNNI interface. The value specified will beused by Generic Connection Admission Control(GCAC) if administrative weight is the selected op-timization criterion; the higher the value, the lessdesirable the link will be in path selection.

Class NA

Presence required

Visibility customer

Range [1..16777215]

Data type Decimal

Initial value 5040

serviceExchange


Domain

Description This attribute specifies the data service exchangeassociated with this interface. Its meaning is de-termined by the network operator. Its value issimply recorded in the accounting records gener-ated by this interface, in the attribute callingDse orcalledDse as appropriate.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 0

softPvpAndPvcHoldOffTime

Parameter name softPvpAndPvcHoldOffTime

Domain

Description This attribute specifies how long to hold off retries

205


following the release of a connection. Due to theway group timers are implemented, it can take from100% to 150% of the provisioned timer to triggerthe desired action. Since SPVC retries are paced,in cases where there are many connections, the en-tire process can take more than 150% of the provi-sioned timer value.

Class NA

Presence required

Visibility customer

Range { [50..20000],0 }


Initial value 0

softPvpAndPvcRetryPeriod

Parameter name softPvpAndPvcRetryPeriod

Domain

Description This attribute represents the time in seconds to waitbetween soft PVP or soft PVC call setup retries.Due to the group timer implementation, it can takefrom 100% to 150% of the provisioned timer valuefor the retry to be triggered.

Class NA

Presence required

Visibility customer

Range [20..999999]

Data type Decimal

Initial value 60

traceDestination

Parameter name traceDestination

Domain

Description This attribute specifies if this node is a trace destin-ation. A PNNI interface may be a trace destinationinterface. By default, it's not. If an operator wants totrace only until this PNNI interface, this interfacecan be set to trace destination by setting this attrib-ute.

Class NA

Presence required

206


Visibility customer

Range no, yes


Initial value no

ubrWeight

Parameter name ubrWeight

Domain

Description This attribute specifies the administrative weight as-signed for setting up switched calls with a servicecategory of Unspecified Bit Rate (UBR) for thisPNNI interface. The value specified will be used byGeneric Connection Admission Control (GCAC) ifadministrative weight is the selected optimizationcriterion; the higher the value, the less desirable thelink will be in path selection.

Class NA

Presence required

Visibility customer

Range [1..16777215]

Data type Decimal

Initial value 5040

207


43 AtmPnniLoadBalancing (Lb)





Parents:

EM - ARtg - Pnni - Lb

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Artg Pnni LoadBalancing/<serviceCategory> Thiscomponent represents the load balancing function-ality of PNNI Routing for the service category spe-cified by the instance value.

Class NA

Presence required

Visibility customer

Unit

Range cbr, rtVbr, nrtVbr, ubr, abr

208


Data Type Enumeration

Initial Value

maxPaths

Parameter name maxPaths

Domain

Description This attribute specifies the maximum number ofpaths to be used for load balancing and route cach-ing. Setting this attribute to 1 turns the load balan-cing off for all load balancing technique except formaxAvCr. This load balancing technique requiresmaxPaths to be set to 1. When the Artg Pnni Cachecomponent is provisioned, this attribute also spe-cifies the maximum number of paths to be stored ina route Cache entry for each destination node. Set-ting this attribute to a value greater than 3 is not re-commended except for certain specific topologies.In these cases, it allows a better load distributionwhen route cache is used. However, for other topo-logies, it will significantly slow down on-demandroute computation. Also when this attribute is set toa value greater than 3, the Artg Pnni lb<srvCat>method attribute can only be set to random. Whenthis attribute is set to a value greater than 3,maxNumEntries in the Artg Pnni Cache subcom-ponent is limited to ensure that maximum memoryconsumption by the route cache on the CP does notincrease when maxPaths is greater than 3. maxNu-mEntries may not exceed the value of 30000/ max-Paths.

Class NA

Presence required

Visibility customer

Range [1..20]

Data type Decimal

Initial value 2

method

Parameter name method

Domain

Description This attribute specifies the load balancing methodto be used by PNNI routing for the correspondingservice category. maxAvCr. PNNI routing chooses

209


the path that has the maximum available cell rateas the routing path. random. The routing path ischosen randomly from all the acceptable paths.avCrProb. The routing path is chosen with a prob-ability in proportion to its available cell rate. Thismethod will result in the more frequent selection ofa route having a higher available cell rate over thatwith a lower available cell rate. optMetricProb. Therouting path is chosen with a probability inverselyproportional to the optimization metric. This methodwill result in the more frequent selection of a routehaving the lowest value of the optimization metricover that with a higher optimization metric.avCrOptMetricProb. The routing path is chosen witha probability that is based on both the proportionalvalue of the available cell rate and the inverse pro-portional value of the optimization metric. When thevalue of maxPaths attribute is greater than 3, onlythe random method is allowed for all service cat-egories.

Class NA

Presence required

Visibility customer

Range maxAvCr, random, avCrProb, optMetricProb,avCrOptMetricProb


Initial value random

minVariance

Parameter name minVariance

Domain

Description This attribute specifies the minimum variance valueto be used for each optimization metric supportedby the service category of this LoadBalancing in-stance. This attribute is a vector indexed by the op-timization metric. Note that the values of this vectorare explicit values as opposed to the factors re-quired to set the slopeVariance attribute. A largervariance allows more usable paths to be consideredfor load balancing. A low variance of zero meansthat only the slopeVariance attribute is used in de-termining the acceptable variance. The maximumrange boundaries for each of the optimization met-rics are: - cdv: 2147483647 (for cbr and rtVbr only).- maxCtd: 2147483647 (for cbr and rtVbr only). -aw: 4294967295. The acceptable variance is calcu-

210


lated based on the following formula: acceptabl-eVariance = minVariance + optM * slopeVariance/100 where optM represents the optimization metricvalue of the best path.

Class NA

Presence required

Visibility customer

Range [0..4294967295]

Data type Fixed[cdv,maxCtd,aw] List of LongInteger

Initial value 0,0,0

slopeVariance

Parameter name slopeVariance

Domain

Description This attribute specifies the slope of the acceptablevariance, for each optimization metric supported bythe service category of this LoadBalancing in-stance. This attribute is a vector indexed by optimiz-ation metric. The values of this vector are factors. Alarger variance allows more usable paths to be con-sidered for load balancing. A slopeVariance of zeromeans that only the acceptable variance is given bythe minVariance attribute. If both minVariance andslopeVariance attributes are zero, means that onlythe best paths of equal value to the optimization-Metric will be considered in load balancing. The ac-ceptable variance is calculated based on the follow-ing formula: acceptableVariance = minVariance +optM * slopeVariance/100 where optM representsthe optimization metric value of the best path.

Class NA

Presence required

Visibility customer

Range [0..1900]

Data type Fixed[cdv,maxCtd,aw] List of Decimal

Initial value 0,0,0

211


44 AtmPnniNodeName (Node)






Parents:

EM - ARtg - Pnni - Node

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Artg Pnni NodeName/<string> This component rep-resents a node in the PNNI network. The recom-mendation is that the instance string should matchthe nodeName of the node. To get the nodeNameof the node, log in to the remote node and enter thiscommand: d -p Mod nodeName

Class NA

Presence required

Visibility customer

212


Unit

Range [1..12]

Data Type AsciiString

Initial Value

nodeId


Domain

Description This attribute specifies the nodeId of the remotenode. The nodeId can be retrieved by logging in tothe remote node and executing this command: dARtg Pnni Cfg/* opNodeId

Class NA

Presence required

Visibility customer

Range [44..44]

Data type HexString

Initial value N.A.

213


45 AtmPnniPeerGroupLeader (Pgl)






Parents:

EM - ARtg - Pnni - CfgNode - Pgl

Child(ren):

-

Identifiers:

-

Links:


Parameters:

initTime

Parameter name initTime

Domain

Description This attribute specifies how long this node delaysadvertising its choice of preferred peer group leaderafter having initialized operation and reached thefull peer state with at least one neighbor in the peergroup. If the value is sameAsPnni, then this value istaken from ARtg Pnni initTime.

Class NA

Presence required

Visibility customer

Range [0..65534]

Data type MixedSigned

214



leadershipPriority

Parameter name leadershipPriority

Domain

Description This attribute specifies the leadership priority to beadvertised by this node during the election process.Currently, this attribute must be changed manuallyafter provisioning the PGL component. Note: If anode is the Peer Group Leader and its leader-shipPriority is modified such that another node hasa higher leadershipPriority, then a re-election isheld immediately on activation.

Class NA

Presence required

Visibility customer

Range [1..205]

Data type Decimal

Initial value 1

overrideDelay

Parameter name overrideDelay

Domain

Description This attribute specifies how long a node waits for it-self to be declared the preferred peer group leaderby unanimous agreement among its peers. If thevalue is sameAsPnni, then this value is taken fromARtg Pnni overrideDelay.

Class NA

Presence required

Visibility customer




reElectionInterval

Parameter name reElectionInterval

Domain

215


Description This attribute specifies how long this node waitsafter losing connectivity to the current peer groupleader before re-starting the process of electing anew peer group leader. If the value is sameAsPnni,then this value is taken from ARtg Pnni reElection-Interval.

Class NA

Presence required

Visibility customer




216


46 AtmRcc (Rcc)





Parents:

EM - AtmIf - Pnni - Rcc

Child(ren):

Vcd -

Identifiers:

-

Links:


Parameters:

aggregationToken

Parameter name aggregationToken

Domain

Description This attribute specifies the aggregation token forthis interface at the local end of the link. The ag-gregation tokens at both ends are use to form thederivedAggregationToken for the link. The aggrega-tion token controls how links are aggregated togeth-er. Except for the lowest level nodes, links betweentwo logical nodes are aggregated together if theyhave the same aggregation token. Link aggregationis not done at the lowest level node, except in thedegenerate node situation, where the lowest levelnode is a neighbor to an LGN. The value is ignoredfor links having a type value of unknown or lowest-LevelHorizLink.

Class NA

217


Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

helloHoldDown


Domain

Description This attribute specifies the rate at which this nodesends out Hello packets. It specifies the defaultminimum length of time between successive Hellosused by routing control channels on this node. Aprovisioning check is made to ensure that this valuecannot be greater than helloInterval. A value of 0specifies that the value provisioned for the hello-HoldDown attribute of the ARtg Pnni componentshould be used.

Class NA

Presence required

Visibility customer

Range [0.0..65535.0]

Data type Decimal

Initial value 0.0



Domain

Description This attribute specifies the number of Hello intervalsallowed to pass without receiving a Hello from aneighbor, before an attempt is made to stage theRCC to that neighbor. The hello inactivity timer isenabled when the helloState is one of oneWayIn-side, twoWayInside, oneWayOutside, twoWayOut-side or commonOutside. A value of 0 specifies thatthe value provisioned for the helloInactivityFactorattribute of the ARtg Pnni component should beused. DESCRIPTION

Class NA

Presence required

218


Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

helloInterval


Domain

Description This attribute specifies the default duration of theHello Timer for routing control channels on thisnode. Every helloInterval seconds, this node sendsout a Hello packet to the neighbor node, subject tothe helloHoldDown timer having expired at leastonce since the last Hello packet was sent. A provi-sioning check is made to ensure that this value can-not be less than helloHoldDown. A value of 0 spe-cifies that the value provisioned for the helloIntervalattribute of the ARtg Pnni component should beused.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

vci

Parameter name vci

Domain

Description This attribute specifies the VCI for the Routing Con-trol Channel (RCC). The value should not bechanged from the default of 18 unless absolutelynecessary. If a different VCI is specified, ensurethat the RCC at the far end is provisioned to use thesame VCI, otherwise the RCC will not come up.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

219


Initial value 18

220


47 AtmRealTimeVariableBitRate (RtVbr)





• Verbs: add,

Parents:

EM - AtmIf - CA - RtVbr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n CA RealTimeVariableBitRate/n This com-ponent manages the default characteristics of thereal-time variable bit rate (rt-VBR) service category.

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

221


Data Type Decimal

Initial Value

cdv

Parameter name cdv

Domain

Description This attribute specifies the peak-to-peak cell delayvariation (CDV) which is contributed to the entireATM Interface for rt-VBR traffic (excluding connec-tions managed by a Vpt CA). The CDV is a meas-ure of the delay jitter introduced mostly by trafficbuffering and cell scheduling. The worst case valueof this attribute can be computed as thetxQueueLimit attribute divided by the link rate of thisATM Interface. This attribute is used by PNNI in theResource Availability Information Group (RAIG) to-pology updates and route selection. It is also usedby CAC at connection set-up time to determinewhether this ATM Interface can meet the CDV re-quirement for that connection. If so, the value of thisattribute is added to the cumulative CDV field of theextended QoS information element.

Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Decimal

Initial value 1268

cdvt

Parameter name cdvt

Domain

Description This attribute specifies the default cell delay vari-ation tolerance (CDVT) for all connections of the rt-VBR service category (including connections man-aged by a Vpt CA). An override to this default maybe specified for a provisioned connection under theVcd Tm or Vpd Tm component. If Usage ParameterControl (UPC) is enabled for a connection, CDVT isused by the UPC function to decide whether a cellis conforming or non-conforming based on the con-nection's traffic descriptor type. The larger the CD-VT value, the more tolerant is the UPC of band-

222


width usage beyond the traffic contract.

Class NA

Presence required

Visibility customer

Range [1..1200000]

Data type Decimal

Initial value 250

cellLossRatio


Domain

Description This attribute specifies the tolerable cell loss ratio(CLR) for rt- VBR traffic (excluding connectionsmanaged by a Vpt CA). The value specified is thenegative base 10 logarithm of the CLR. For ex-ample, if the target CLR = 1E-10 then the value ofthe cellLossRatio attribute is 10. The value of thisattribute must be the same as the value of the CbrcellLossRatio attribute since CBR and rt-VBR traffichave the same discard priority. The value if this at-tribute must also be greater than or equal to thevalue of the NrtVbr cellLossRatio attribute since rt-VBR traffic has a higher discard priority. This attrib-ute is used by the Connection Admission Control(CAC) algorithm to compute the equivalent cell rate(ECR) required for rt- VBR connections. There is atrade-off between the service category CLR and theachievable link utilization. To guarantee an excel-lent service category, the CLR should be as smallas possible (for example, 1E- 10). However, a smal-ler CLR results in a larger equivalent cell rate for agiven connection and hence a lower link utilization.A value of anyClrValue means that no bandwidth isreserved for rt- VBR connections, and CAC is ef-fectively turned off. All rt-VBR connections are ad-mitted.

Class NA

Presence required

Visibility customer



Initial value 10

223


emissionPriority


Domain

Description This attribute specifies the emission priority (EP)which is used to transmit traffic of the rt-VBR ser-vice category. A lower numerical value for this at-tribute specifies a higher emission priority. 0 is thehighest EP and 7 is the lowest. Cells at a higheremission priority receive higher preference for linkbandwidth. EP 0 and EP 1 are in the absolute prior-ity range and are unaffected by any minimum band-width guarantees. EP 2 through EP 7 are in theguaranteed bandwidth range and may achieve apriority which is different from the strict hierarchicalpriority, if a minimum bandwidth guarantee is provi-sioned. A minimum bandwidth guarantee is spe-cified in the AtmIf/n Ep/m component. This attributedoes not apply to basic VPTs, or standard VptVCCs. This attribute is not applicable and is ignoredfor 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, and 1pOC12SmLrAtm cards, emission pri-ority setting must comply with all of the followingconstraints: 1. The emission priority numbers mustbe in the following order: CBR <= rt-VBR <= nrt-VBR <= ABR <= UBR 2. Two different ATM servicecategories may share the same EP only if they areboth shaped. 3. CBR and rt-VBR may be placedeither in the absolute priority range (EP 0 or 1) or inthe guaranteed bandwidth range (EP 2 through 7).4. If both CBR and rt-VBR are shaped, rt-VBR mustshare the same EP with CBR or ABR. If either oneof CBR or rt-VBR are not shaped, then they cannotshare the same EP. 5. ABR service category is al-ways deemed to be shaped. If nrt-VBR is shaped, itmust share the same EP with ABR. If nrt-VBR is notshaped it must have a higher EP than ABR. 6. IfUBR is shaped, it must share the same EP withABR. If UBR is not shaped, it must have a lower EPthan ABR. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards, emission priority set-ting must comply with all of the following con-straints: 1. The emission priority numbers must bein the following order: CBR <= rt-VBR <= nrt-VBR

224


<= UBR 2. Two different ATM service categoriesmay share the same EP only if they are bothshaped. 3. EP 0 must be used if traffic shaping isrequired. 4. EP 5 and EP 6 are not supported. For16pOC3PosAtm and 4pMRPosAtm cards, emissionpriority setting must comply with all of the followingconstraints: 1. The emission priority numbers mustbe in the following order: CBR <= rt-VBR <= nrt-VBR <= UBR 2. Two different ATM service categor-ies may share the same EP only if they are bothshaped. For 1pOC48ChSmIrAtm cards, only the de-fault value is supported. For 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards thedefault value is 2.

Class NA

Presence optional

Visibility customer

Range [0..7]

Data type Decimal

Initial value 1

forceTagging


Domain

Description This attribute specifies the default force tagging(CLP=1) value of all cells for rt-VBR permanentconnections. An override to this default may be spe-cified for a provisioned connection under the VcdTm or Vpd Tm component. A value of enabledmeans CLP is set to 1 for all cells. A value of dis-abled means CLP is unchanged for all cells. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, force tagging applies tocells in the receive direction. For all other cards,force tagging applies to cells in the transmit direc-tion. This attribute does not apply to any type of Vptcomponent. This attribute does not apply toswitched rt-VBR connections. This attribute is notapplicable and is ignored for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm, and1pOC48ChSmIrAtm cards.

Class NA

Presence required

Visibility customer

225





holdingPriority


Domain

Description This attribute specifies the default holding prioritywhich applies to SVP and SVC rt-VBR connections.It takes a value from 0 (highest priority) to 4 (lowestpriority). In a situation where the link bandwidth fluc-tuates, such as over an IMA link, holding priority isused to determine which connections are held andwhich are released. Holding priority 4 connectionsare the first to be released. Holding priority 0 con-nections are the last to be released. This attributedoes not apply to Vpt VCCs. When bandwidth fluc-tuates, the entire Vpt component, along with all VptVCCs, is released as a unit, according to the Vpt'sholdingPriority.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 3

maxCtd


Domain

Description This attribute specifies the maximum cell transferdelay (MaxCTD) which is applied to the entire ATMInterface for rt-VBR traffic (excluding connectionsmanaged by a Vpt CA). MaxCTD is the sum of thefixed delay and the CDV. The components of thefixed delay include propagation delay through thephysical media, delays induced by the transmissionsystem and fixed components of switch processingdelay. This attribute is used by PNNI in the Re-source Availability Information Group (RAIG) topo-logy updates and route selection. It is also used byCAC at connection set-up time to determine wheth-

226


er this ATM Interface can meet the ATM connec-tion's MaxCTD requirement.

Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Decimal

Initial value 2000

minPerVcQueueLimit


Domain

Description This attribute specifies the minimum queue limit forthe per-VC queues of connections of the rt-VBRservice category. This attribute is ignored for1pOC12SmLrAtm cards, because they do not sup-port per-VC queues for the rt-VBR service category.The queue limit of a per-VC queue is obtained byscaling down the txQueueLimit attribute based onthe shaping rate of that queue (shaping rate for theconnection and for standard Vpt VCCs, the shapingrate of the Vpt component). This produces a con-stant delay for various queue lengths. The value ofthe txQueueLimit attribute provides an upper boundwhile the value of the minPerVcQueueLimit attributeprovides the lower bound. The value of this attributemust not be greater than the value of thetxQueueLimit attribute. If this service category isused by Trunks, the value of the minPerVc-QueueLimit attribute must be at least 88. For VPTs,this attribute does not apply. Regardless of theVpt's service category, standard VPTs always usethe AtmIf CA NrtVbr minPerVcQueueLimit value astheir default. To determine the queue limit of astandard Vpt Vcc, the txQueueLimit attribute isscaled down by the Vpt shaping rate. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, and 1pOC48ChSmIrAtm cards, the validrange for this attribute is from 5 to 160000 inclusive.For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, the valid range for this at-tribute is from 36 to 512000 inclusive. For16pOC3PosAtm cards, the valid range for this at-

227


tribute is from 32 to 261120 inclusive. For4pMRPosAtm cards, the valid range for this attrib-ute is from 32 to 1011840 inclusive.

Class NA

Presence required

Visibility customer

Range [5..1011840]

Data type Decimal

Initial value 88



Domain

Description This attribute specifies the shaping rate to be usedin computing the tolerable delay for per-VC queuesof connections of the rt-VBR service category. Thedelay is computed as the txQueueLimit divided bythe value of this attribute. This attribute is ignoredfor 1pOC12SmLrAtm and 1pOC48ChSmIrAtmcards, because they do not support traffic shapingfor the rt-VBR service category. A value of auto-Configure means an appropriate value is selectedbased on the card type. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm,2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,4pOC3MmAtm, and 4pOC3SmIrAtm cards, thevalue is 14740. For 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, 2pJ6MAtm, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch and4pDS3ChAtm cards, the value is 3685. For MSA32cards, the value is 14740 for OC-3 channels, and3685 for DS1, or E1 channels. For4pOC12SmIrAtm, and 4pOC12SmLrAtm cards, thevalue is 262044. For 4pMRPosAtm cards, the valueis 157228 for OC-12 ports and 628912 for OC-48ports. For 16pOC3SmIrAtm cards, the value is65511. For 16pOC3PosAtm cards, the value is39307. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards the maximum value is1416905. For 16pOC3PosAtm cards, the maximumvalue is 353207. For 4pMRPosAtm cards, the max-imum value is 1412830 for OC-12 ports and5651320 for OC- 48 ports. For all other cards, themaximum value is 943396. For VPTs, this attributedoes not apply. Regardless of the Vpt's service cat-

228


egory, standard VPTs always use the AtmIf CANrtVbr perVcQueueLimitReferenceRate attributevalue as their default.

Class NA

Presence required

Visibility customer




pool

Parameter name pool

Domain

Description This attribute specifies the bandwidth pool which isto be used to support the real-time variable bit rate(rt-VBR) service category (excluding connectionsmanaged by a Vpt CA). The percentage of link ca-pacity reserved for the given bandwidth pool is themaximum bandwidth that can be allocated to rt-VBR traffic. The percentage allocated to each band-width pool can be provisioned through the band-widthPool attribute of the CA component.

Class NA

Presence required

Visibility customer



Initial value pool1



Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming cells for rt-VBR ser-vice category. If the count of discarded incoming rt-VBR cells is greater than the provisioned value ofthis attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedincoming rt-VBR cells is still greater than the provi-sioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If the

229


count of discarded incoming rt-VBR cells drops be-low the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded incoming rt-VBR cellsare not monitored and no alarm is generated. Whilethe alarm is set, if the value of this attribute ischanged, the alarm is cleared. This attribute is notapplicable for 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm and 2pJ6MAtm cards. Thisattribute is not applicable for 4pOC12SmIrAtm and4pOC12SmLrAtm cards when channelized.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0



Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming frames for rt-VBR ser-vice category. If the count of discarded incoming rt-VBR frames is greater than the provisioned value ofthis attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedincoming rt-VBR frames is still greater than the pro-visioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded incoming rt-VBR frames dropsbelow the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded incoming rt-VBRframes are not monitored and no alarm is gener-ated. While the alarm is set, if the value of this at-tribute is changed, the alarm is cleared. This attrib-ute is not applicable for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards.

Class NA

Presence required

230


Visibility customer

Range [0..4294967295]


Initial value 0

shapeRecoupPolicy


Domain

Description This attribute specifies the shaping recoup policy forthe rt-VBR service category. This is the policy whichis used to recoup shaping opportunities which arelost when more than one connection schedules acell for the same transmit opportunity. In this case,one connection is scheduled and the cell from theother connection is delayed by one cell time. Thisattribute affects how the transmit time is calculatedfor the next cell on the delayed connection. This at-tribute is ignored if this service category is notshaped. This attribute does not apply to basicVPTs, or standard Vpt VCCs. This attribute is notapplicable and is ignored for 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards.When the connection which was delayed schedulesthe next cell to transmit, it may calculate the time asa difference from either the previous actual celltransmit time, or the time when the previous cellshould have been transmitted. A value of maxim-umEfficiency results in each connection trying to re-coup or regain any delays in scheduling. The trans-mit time for the next cell is calculated from the timewhen the previous cell should originally have beensent. Cell delay variation (CDV) occurs in this casesince the cells are sent with less than the shapingdelay between them. However, in general theshaper recovers (recoups) lost opportunities andimproves efficiency. A value of minimumCdv resultsin connections not trying to recoup or regain anydelays in scheduling. The transmit time for the nextcell is calculated from the time when the previouscell was actually transmitted. This minimizes CDV,but results in missed cell opportunities.

Class NA

Presence required

Visibility customer


231



Initial value minimumCdv



Domain

Description This attribute specifies the holding priority which ap-plies to SVC rt- VBR point-to-multipoint connec-tions. It takes a value from 0 (highest priority) to 4(lowest priority). In a situation where the link band-width fluctuates, such as over an IMA link, holdingpriority is used to determine which connections areheld and which are released. Holding priority 4 con-nections are the first to be released. Holding priority0 connections are the last to be released. This at-tribute does not apply to Vpt VCCs, When band-width fluctuates, the entire Vpt component, alongwith all Vpt VCCs, is released as a unit, accordingto the Vpt's holdingPriority.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 3

trafficShaping


Domain

Description This attribute specifies the default traffic shapingoption for connections of the rt-VBR service cat-egory. An override to this default may be specifiedfor a provisioned connection under the Vcd Tm orVpd Tm component. This attribute does not apply tobasic VPTs, or standard Vpt VCCs. A value of dis-abled means traffic shaping cannot be enabled forany rt-VBR connections. For 1pOC12SmLrAtm and1pOC48ChSmIrAtm cards, the value of this attrib-ute must be disabled since traffic shaping is notsupported for rt-VBR connections on these cards.For 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, the value of this

232


attribute may be enabled only if the interface sup-ports shaping, as defined by the perVcQueueInter-faces attribute of the Lp Eng Arc Cqc Ov compon-ent. If that component does not exist, the value ofthis attribute must be disabled. If the Vcc Tm, VpcTm, or Vpt Tm, txTrafficDescType attribute indic-ates type 1 or 2, this attribute is ignored and trafficshaping is not applicable for that connection. Avalue of inverseUpc means traffic shaping for aconnection is enabled according to the value of theVcc Tm, Vpc Tm, or Vpt Tm txTrafficDescType at-tribute. A value of inverseUpc when the txTraffic-DescType is 3, 4, or 5, means linear traffic shapingis enabled. Linear traffic shaping uses a single stat-ic traffic shaping rate. A value of inverseUpc whenthe txTrafficDescType is 6, 7, or 8, means inverse-UPC (also referred to as VBR or dual leaky bucket)traffic shaping is enabled. Inverse-UPC traffic shap-ing can burst above the sustained cell rate to thepeak cell rate for the duration defined by the max-imum burst size. Inverse-UPC traffic shaping ex-actly conforms to the requirements of a dual leakybucket UPC enforcer. For 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards, thevalue inverseUpc is not available. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, the value in-verseUpc is not supported and is equivalent to thevalue enabled. A value of enabled when the txTraf-ficDescType is 3, 4, 5, 6, 7, or 8, means trafficshaping for a connection is enabled using linearshaping. Enabling or disabling traffic shaping mayrequire a matching change to the emissionPriorityattribute, and the unshapedTransmitQueueing at-tribute for this service category. Refer to those at-tributes for the complete description of the interac-tions.

Class NA

Presence required

Visibility customer






233


Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing cells for rt-VBR ser-vice category. If the count of discarded outgoing rt-VBR cells is greater than the provisioned value ofthis attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedoutgoing rt-VBR cells is still greater than the provi-sioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded outgoing rt-VBR cells drops be-low the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded outgoing rt-VBR cellsare not monitored and no alarm is generated. Whilethe alarm is set, if the value of this attribute ischanged, the alarm is cleared. This attribute is notapplicable for 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm and 2pJ6MAtm cards. Thisattribute is not applicable for 4pOC12SmIrAtm and4pOC12SmLrAtm cards when channelized.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0



Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing frames for rt-VBR ser-vice category. If the count of discarded outgoing rt-VBR frames is greater than the provisioned value ofthis attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedoutgoing rt-VBR frames is still greater than the pro-visioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded outgoing rt-VBR frames dropsbelow the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded outgoing rt-VBRframes are not monitored and no alarm is gener-

234


ated. While the alarm is set, if the value of this at-tribute is changed, the alarm is cleared. This attrib-ute is not applicable for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

txQueueLimit


Domain

Description This attribute specifies the default maximum queuelength for the emission queues used to buffer thetraffic of the rt-VBR service category. It is used asthe basis for setting both the queue length and thediscard thresholds on both common and per-VCqueues. For the common queue, the discardthresholds are set at approximately 35, 75, and 90percent of the value of this attribute for traffic at dis-card priority 3 (DP=3), DP=2, and DP=1 respect-ively. For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, common queuing is notavailable for the rt-VBR service category. For a per-VC queue, the actual queue length may be reduceddepending on the shaping rate of the connection(for standard Vpt VCCs, this is the shaping rate ofthe Vpt component). The discard thresholds are setat approximately 35, 75, and 90 percent of thescaled queue limit for traffic at discard priority 3(DP=3), DP=2, and DP=1, respectively. However, areduction will never result in a value that is lessthan the value of the minPerVcQueueLimit attribute.The per-VC queue limit may be overridden for aprovisioned connection by specifying a value in theVcd Tm or Vpd Tm txQueueLimit attribute. For1pOC12SmLrAtm and 1pOC48ChSmIrAtm cards,per-VC queues are not available for the rt-VBR ser-vice category. For 1pOC48ChSmIrAtm cards, thisattribute is used to set the maximum size of the link-class queue for buffering the egress traffic of the rt-

235


VBR service category. This is similar to commonqueuing, except that each rt-VBR connection main-tains a per-VC utilization limit of the common queuespecified for a provisioned connection by the VcdTm or Vpd Tm txQueueLimit attribute. A value ofautoConfigure means an appropriate value is selec-ted based on the card type. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm,2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,4pOC3MmAtm, 4pOC3SmIrAtm, and16pOC3SmIrAtm cards, the value is 480. For3pE1Atm, 3pDS1Atm, 8pE1Atm, 8pDS1Atm,2pJ6MAtm, 2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch,4pOC3Ch and 4pDS3ChAtm cards, the value is288. For MSA32 cards, the value is 480 for OC-3channels, and 288 for DS1, or E1 channels. For16pOC3PosAtm cards, the value is 1280. For1pOC12SmLrAtm cards, the value is 2048. For4pOC12SmIrAtm, and 4pOC12SmLrAtm cards, thevalue is 1920. For 4pMRPosAtm cards, the value is5120 for OC-12 ports and 20480 for OC-48 ports.For 1pOC48ChSmIrAtm cards, the value is 12288.The operational value of the maximum length of aqueue (common or per-VC) is indicated by the VccTm, Vpc Tm, or Vpt Tm txQueueThresholds attrib-ute. For standard VPTs, this attribute only applieswhen using common queuing. When using per-VCqueuing, regardless of the Vpt's service category,standard VPTs use the AtmIf CA NrtVbrtxQueueLimit attribute value as their default. Thisattribute does not apply to basic VPTs. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards the valid rangefor this attribute is from 5 to 30000 inclusive. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, 1pOC12SmLrAtm, and1pOC48ChSmIrAtm cards, the valid range for thisattribute is from 5 to 160000 inclusive. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, the valid range for this at-tribute is from 5 to 512000 inclusive. For16pOC3PosAtm cards, the valid range for this at-tribute is from 32 to 261120 inclusive. For4pMRPosAtm cards, the valid range for this attrib-ute is from 32 to 1011840 inclusive.

Class NA

236


Presence required

Visibility customer






Domain

Description This attribute specifies the default queuing optionfor unshaped connections of the rt-VBR service cat-egory. This attribute controls whether common orper-VC queuing is used. A value of perVc meansthat each connection has its own buffering andqueue limits. A value of common means that cellsare queued in First In First Out order on a commonqueue for this service category. The commonqueue has one set of congestion control levels forall cells enqueued on it. This attribute does not ap-ply to basic VPTs and standard Vpt VCCs. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, if the perVc-QueueInterfaces attribute of the Lp Eng Arc Cqc Ovcomponent permits shaping for this interface, thenthis attribute may take any of the three values. Inthis case, the value autoConfigure is interpreted tomean per-VC queuing. If the perVcQueueInterfacesattribute of the Lp Eng Arc Cqc Ov component doesnot permit shaping for this interface, then this attrib-ute may take the values common, or autoConfigure.In this case, the value autoConfigure is interpretedto mean common queuing. An override to this de-fault may be specified for a provisioned connectionunder the Vcd Tm, or Vpd Tm component. For1pOC12SmLrAtm and 1pOC48ChSmIrAtm cards,the value perVc is not supported since these cardsdo not support per-VC queuing. The value autoCon-figure is interpreted to mean common queuing. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, the value common is notsupported since these cards do not support com-mon queuing. The value autoConfigure is inter-preted to mean per-VC queuing. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,

237


3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, 16pOC3PosAtm, and 4pMRPosAtm cards,if traffic shaping for this service category is dis-abled, this attribute may take any of the three val-ues. In this case, the value autoConfigure is inter-preted to mean per-VC queuing. If traffic shapingfor this service category is not disabled, the onlypermitted values are perVc and autoConfigure. Inthis case, the value autoConfigure is interpreted tomean per-VC queuing. For 16pOC3PosAtm and4pMRPosAtm cards, no more than 32,000 connec-tions on the FP can use per-VC queuing. The re-maining connections must use common queuing.The Lp Eng Arc perVcQueueUsage attribute indic-ates the number per-VC queues that are currentlyin use. The value of the operational opUn-shapedTransmitQueueing attribute of this compon-ent indicates whether the transmit queuing is perVc,or common.

Class NA

Presence required

Visibility customer






Domain

Description This attribute specifies the default usage parametercontrol (UPC) option for connections of the rt-VBRservice category. This attribute is ignored if the rx-TrafficDescriptorType indicates 1 or 2. An overrideto this default may be specified for a provisionedconnection under the Vcd Tm or Vpd Tm compon-ent. A value of enforced means UPC is enforced foreach connection. When UPC is enforced, non-conforming cells are either tagged or discarded de-pending on the rxTrafficDescriptorType. A value ofmonitored means UPC conformance checking isperformed, except, instead of the non-conformingcells being tagged or discarded, they are merelycounted in the UPC violations counts and passedon unchanged. A value of disabled means UPC isdisabled on the receive path for all rt-VBR connec-tions. This attribute does not apply to basic VPTs,

238


or standard Vpt VCCs. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, and 2pJ6MAtmcards, the value monitored is not supported. Thisvalue has the same effect as disabled. For1pOC48ChSmIrAtm cards, the value of this attrib-ute must be disabled.

Class NA

Presence required

Visibility customer




weightPolicy


Domain

Description This attribute specifies the policy which is appliedwhen calculating the fairness weight for unshapedconnections of the rt-VBR service category. Thefairness weight for a connection determines the rel-ative amount of bandwidth which that connectionobtains, compared to other connections in the sameservice category. Connections with equal weight getequal transmit opportunities. Connections with high-er weights get more transmit opportunities com-pared with connections that have lower weights. Anoverride to this default may be specified for a provi-sioned connection under the Vcd Tm, or Vpd Tmcomponent. The fairness weight for a connection isdirectly proportional to the value of one of the trafficdescriptor parameters for that connection. This at-tribute specifies which traffic descriptor parameter isused for connections of the rt-VBR service cat-egory. A value of scr means the fairness weight isproportional to the transmit sustained cell rate(SCR) of a connection. Connections with a higherSCR have a higher fairness weight. For connec-tions with txTrafficDescType 3, which have no SCR,the sustained cell rate is assumed to be equal tothe peak cell rate. A value of pcr means the fairnessweight is proportional to the transmit peak cell rate(PCR) of a connection. Connections with a higherPCR have a higher fairness weight. Connectionswith txTrafficDescType 1 or 2 get a minimumweight, which is 1. A value of ecr means the fair-

239


ness weight is proportional to the equivalent cellrate (ECR) of a connection as calculated by con-nection admission control (CAC). Connections witha higher ECR have a higher fairness weight. Con-nections with an ECR of 0 get a minimum weight,which is 1. The weight of a connection is visible inthe Vcc Tm, Vpc Tm, or Vpt Tm weight attribute.This attribute does not apply to basic VPTs andstandard Vpt VCCs. This attribute is ignored if thevalue of the unshapedTransmitQueueing attribute iscommon. This attribute is not applicable and is ig-nored for 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, 1pOC12SmLrAtm, and1pOC48ChSmIrAtm cards.

Class NA

Presence required

Visibility customer

Range scr, pcr, ecr


Initial value ecr

240


48 AtmResourceControls (Arc)






Parents:

EM - Lp - Eng - Arc

Child(ren):

Apc - Ov -

Identifiers:

-

Links:


Parameters:

241


49 AtmRouting (ARtg)






Parents:

EM - ARtg

Child(ren):

Pnni -

Identifiers:

-

Links:


Parameters:

discardCallsOnOverload

Parameter name discardCallsOnOverload

Domain

Description This attribute specifies whether or not ATM sig-nalling overload control is in effect on this node foreach FP. A value of enabled causes new incomingcalls to be discarded on overloaded egress FPs.Overload is detected when more than 39% of sig-nalling message buffers are in use, or more than 63SSCOP PDUs have not been acknowledged. Setthe attribute to enabled when low call setup latencyis preferred over calls being discarded.

Class NA

Presence required

Visibility customer

242


Range disabled, enabled



useBestMatchAddrOnCrankback

Parameter name useBestMatchAddrOnCrankback

Domain

Description This attribute specifies when the ATM routing sys-tem should be using best match addresses for acrankback. By default, when performing a crank-back, the ATM routing system only considers ad-dresses that are equal to the length of the addressused during the first routing attempt. With this attrib-ute, you may specify that the ATM routing systemalso considers best match addresses for a crank-back when this node is the DTL originating node,the DTL terminating node, or acts as both the DTLoriginating and terminating node. The possible val-ues for this attribute are: none: specifies that theDTL originator and the DTL terminator are not usingbest match address resolution when calculating aroute. originatingOnly: specifies that only the DTLoriginator uses best match address resolution. ter-minatingOnly: specifies that only the DTL terminatoruses best match address resolution. originatingTer-minating: specifies that both the DTL originator andthe DTL terminator use best match address resolu-tion.

Class NA

Presence required

Visibility customer

Range none, originatingOnly, terminatingOnly, originat-ingTerminating


Initial value none

243


50 AtmSignalling (Sig)





Parents:

EM - AtmIf - Uni - Sig

EM - AtmIf - Pnni - Sig

Child(ren):

Vcd -

Identifiers:

-

Links:


Parameters:

addressConversion

Parameter name addressConversion

Domain

Description This attribute specifies the address conversion onthe outgoing signaling PDUs. The options are none,nativeE164, or nsap. The none option is the defaultand if this option is chosen then nothing is done tothe address information element (IE) in the outgoingsignaling message. If nativeE164 option is chosen,then only NSAP encapsulated E.164 addresseswith zeros in the ESI are converted to native E.164format in the outgoing signaling message. If theNSAP address is not encapsulated E.164 or theESI field is not zeros and the nativeE164 option ischosen, then the call is cleared. If the nsap option ischosen, then native E.164 addresses are converted

244


to NSAP E.164 with zeros in the ESI field; other-wise the address is in NSAP format and is notchanged.

Class NA

Presence required

Visibility customer

Range none, nativeE164, nsap


Initial value none

operatingMode

Parameter name operatingMode

Domain

Description This attribute specifies the operating mode of thesignaling channel provisionedOnly indicates thatonly SPVCs and SPVPs are supported on the inter-face and SVCs are not supported. This value is per-mitted only on UNI interfaces. normal indicates thatSVCs, SPVCs, and SPVPs are supported on the in-terface.

Class NA

Presence required

Visibility customer

Range normal, provisionedOnly


Initial value normal

vci

Parameter name vci

Domain

Description This attribute specifies the signaling channel num-ber.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 5

245


246


51 AtmSrcPvc (Src)






Parents:

EM - AtmIf - Vpt - Vcc - Src

EM - AtmIf - Vcc - Src

Child(ren):

-

Identifiers:

-

Links:


Parameters:

adminControl

Parameter name adminControl

Domain

Description This attribute specifies the initial state of the con-nection. If this attribute is set to permLocked, theconnection initially remains down following activa-tion. Setting this attribute to unlocked causes theconnection to be established when it is activated.

Class NA

Presence required

Visibility customer

Range permLocked, unlocked

247



Initial value unlocked

aisGeneration

Parameter name aisGeneration

Domain

Description This attribute specifies whether OAM-AIS genera-tion occurs on the connection towards this interfacewhen the SPVC is down. If this attribute is enabled,OAM-AIS cells are generated for this SPVC whenthe SPVC is not up. The only exception is that whenthe source SPVC attribute adminControl is set topermLocked, OAM-AIS cells are not generated forthe source SPVC. If this attribute is set to disabled,OAM-AIS cells are not generated.

Class NA

Presence required

Visibility customer




bandwidthElastic


Domain

Description This attribute is only of use for SPVC and SPVPsource points which are carried on an IMA group.This attribute specifies whether or not the connec-tion will be dropped if the link bandwidth is reducedbelow the value of the requested connection band-width. For example, the link bandwidth may be re-duced in the event that one or more physical links inthe IMA group fail and now the originally requestedconnection bandwidth cannot be maintained. Avalue of yes, indicates that this connection is band-width elastic, and the link bandwidth may fall belowthe requested connection bandwidth but the con-nection will not drop. A value of no indicates thatthe bandwidth for this connection can't be reducedin the event of link bandwidth reduction. Note thatconnections may still be dropped based on its hold-ing Priority.

248


Class NA

Presence required

Visibility customer

Range no, yes


Initial value no

calledAddress


Domain

Description This attribute represents the called (remote) ad-dress of the soft PVC.

Class NA

Presence required

Visibility customer

Range [40..40]

Data type HexString

Initial value N.A.

calledVpiVci


Domain

Description This attribute represents the remote VPI and VCI ofthe soft PVC.

Class NA

Presence required

Visibility customer

Range { [0..4095],[1..65535], }


Initial value N.A.

callingAddress

Parameter name callingAddress

Domain

Description This attribute represents the calling address of thesoft PVC. If it is a null string, then the calling ad-

249


dress is the address of the current interface (that is,where the soft PVC originates).

Class NA

Presence required

Visibility customer

Range [0..40]

Data type HexString

Initial value

250


52 AtmSummaryAddress (SAddr)






Parents:

EM - ARtg - Pnni - CfgNode - SAddr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description ARtg Pnni CfgNode/<level> SummaryAddress/<address>, <prefixLength>, <reachability> A sum-mary address is an abbreviation of a set of ad-dresses, represented by an address prefix that all ofthe summarized addresses have in common. Asuppressed summary address is used to suppressthe advertisement of addresses which match thisprefix, regardless of scope. The prefixLength spe-cifies the number of significant bits of the address.reachability specifies whether the address is to

251


summarize internal or exterior addresses. An intern-al address is an address of a destination that is dir-ectly attached to the logical node. An exterior ad-dress is an address of a destination that is locatedoutside of the PNNI routing domain but can bereached through a port attached to the logical node.

Class NA

Presence required

Visibility customer

Unit

Range [38..38],[1..152],[internal, exterior]

Data Type HexString,Decimal,Enumeration

Initial Value

suppress

Parameter name suppress

Domain

Description This attribute specifies whether or not the addressshould be suppressed. If this attribute is set to true,then all addresses matching that prefix will not beadvertised above this level.

Class NA

Presence required

Visibility customer

Range false, true


Initial value false

252


53 AtmTrafficManagementProv (Tm)





Parents:

EM - AtmIf - Vpt - Vpd - Tm

EM - AtmIf - Vcc - Vcd - Tm

EM - AtmIf - Vpc - Vpd - Tm

EM - AtmIf - Vpt - Vcc - Vcd - Tm

Child(ren):

-

Identifiers:

-

Links:


Parameters:

abrConnectionType

Parameter name abrConnectionType

Domain

Description This attribute specifies the type of ABR behaviorwhich is to be enforced at this connection. This at-tribute is only applicable if the value of the atmSer-viceCategory attribute is availableBitRate. If thevalue of the atmServicecategory attribute is notavailableBitRate, this attribute is ignored. The valuesameAsCa is used to request the default behavioras specified in the CA Abr component for this Vcc.Otherwise, this attribute overrides the default beha-

253


vior. The value virtualSourceDest is used to requestthat this connection point function as a virtualsource/virtual destination. The value sourceDest re-quires that this connection point function as a S/Dfor RM cells. S/D mode is automatically invoked atthis connection point either if this is a connectionend point, or if the next hop connection point is con-figured as nonAbrInterworking. The value nonAb-rInterworking is used to request that this connectionpoint function as an interworking between ABR andnon-ABR service categories. This means that thereare no RM cells on the link side of this connection,and that the next hop connection point is performingas an ABR sourceDest. The value abrSwitch isused to request ABR switch behavior for this con-nection point. The ABR switch behavior is first, toconform to virtualSourceDest or nonAbrInterworkingsetting on the next hop, and otherwise to implementABR ER switch behavior. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, and 2pJ6MAtmcards, the only allowable values are sameAsCa,nonAbrInterworking or abrSwitch. If abrSwitch is se-lected, EFCI marking behavior is implemented. For1pOC12SmLrAtm cards, the only allowable valuesare sameAsCa or abrSwitch. If abrSwitch is selec-ted, EFCI marking behavior is implemented. For16pOC3PosAtm and 4pMRPosAtm cards, the onlyallowable value is sameAsCa. The actual ABRfunctionality which is in effect is visible in the Vcc/Vpc/Vpt Tm abrConnectionType operational attrib-ute.

Class NA

Presence required

Visibility customer

Range abrSwitch, virtualSourceDest, sourceDest, nonAb-rInterworking, sameAsCa



atmServiceCategory


Domain

Description This attribute specifies the ATM service category forboth directions of the connection. The value de-rivedFromBBC may only be used if the Src or Dst

254


component is provisioned under this connection.Otherwise a specific ATM service category must bespecified. A value of derivedFromBBC means theBroadband Bearer Capability (BBC) and bestEffortattributes are used to determine the atmServiceCat-egory of this connection. A value other than de-rivedFromBBC means the value of this attribute isused to override the provisioned BBC InformationElement parameters. In this case, the BBC attrib-utes are not used. The constantBitRate service cat-egory is intended for real-time applications, that isthose requiring tightly constrained delay and delayvariation, as would be appropriate for voice andvideo applications. The consistent availability of afixed quantity of bandwidth is considered appropri-ate for CBR service. Cells which are delayed bey-ond the value specified by Cell Transfer Delay areassumed to be of significantly reduced value to theapplication. The rtVariableBitRate service categoryis intended for real-time applications, that is thoserequiring tightly constrained delay and delay vari-ation, as would be appropriate for voice and videoapplications. Sources are expected to transmit at arate which varies with time. Equivalently, the sourcecan be described as "bursty". Cells which aredelayed beyond the value specified by CTD are as-sumed to be of significantly reduced value to theapplication. Real-time VBR service may supportstatistical multiplexing of real- time sources. ThenrtVariableBitRate service category is intended fornon-real time applications which have bursty trafficcharacteristics and which can be characterized interms of a PCR, SCR, and MBS. For those cellswhich are transferred within the traffic contract, theapplication expects a low cell loss ratio. For all con-nections, it expects a bound on the mean cell trans-fer delay. Non real-time VBR service may supportstatistical multiplexing of connections. The avail-ableBitRate service is an ATM layer service cat-egory for which the limiting ATM layer transfer char-acteristics provided by the network may changesubsequent to connection establishment. ABR ser-vice has a flow control mechanism which supportsseveral types of feedback to control the source ratein response to changing ATM layer transfer charac-teristics. ABR service is not intended to supportreal-time applications. The unspecifiedBitRate ser-vice is intended for non real-time applications; thatis, those not requiring tightly constrained delay anddelay variation. UBR sources are expected to bebursty. UBR service supports a high degree of stat-

255


istical multiplexing among sources. UBR servicedoes not specify traffic related service guarantees.No numerical commitments are made with respectto the cell loss ratio experienced by a UBR connec-tion, or as to the cell transfer delay experienced bycells on the connection.

Class NA

Presence required

Visibility customer

Range unspecifiedBitRate, constantBitRate, rtVariable-BitRate, nrtVariableBitRate, availableBitRate, de-rivedFromBBC, ubr, cbr, rtvbr, nrtvbr, abr, derived


Initial value unspecifiedBitRate

bearerClassBbc

Parameter name bearerClassBbc

Domain

Description This attribute specifies the bearer capability. Thisattribute is only used for SPVC and SPVP connec-tions. It is one of the Broadband Bearer Capability(BBC) attributes. The purpose of the BBC informa-tion element is to indicate a requested broadbandconnection-oriented bearer service to be providedby the network. The value derivedFromServiceCat-egory specifies that the actual value which is usedfor this connection is derived from the value of theatmServiceCategory. Either, this attribute must beset to derivedFromServiceCategory, or the atmSer-viceCategory attribute must be set to derived-FromBBC, but not both. Class a service is a con-nection-oriented, constant bit rate ATM transportservice. Class a service has end to end timing re-quirements and may require stringent cell loss, celldelay and cell delay variation performance.When ais set, the user is requesting more than an ATMonly service. The network may look at the AAL toprovide interworking based upon its contents. Classc service is a connection-oriented, variable bit rateATM transport service. Class c service has no end-to-end timing requirements. When c is set, the useris requesting more than an ATM only service. Thenetwork interworking function may look at the AALand provide service based on it. Class x service is aconnection-oriented ATM transport service wherethe AAL, trafficType (vbr or cbr) and timing require-

256


ments are user defined (that is, transparent to thenetwork).When x is set the user is requesting anATM only service from the network. In this case, thenetwork shall not process any higher layer protocol.Class vp service is used to specify a transparent VPservice. When the value of this attribute is vp, theuser is requesting an ATM only service from thenetwork. In this case, the network shall not processany higher layer protocol. This service differs fromclass x service in that with the class vp service boththe VCI field (except or VCI values 0, 3, 4, and 6through 15) and Payload Type field are transportedtransparently by the network. This attribute value isonly applicable to SPVP connections.

Class NA

Presence required

Visibility customer

Range a, c, x, vp, derivedFromServiceCategory


Initial value derivedFromServiceCategory

bestEffort

Parameter name bestEffort

Domain

Description This attribute specifies the value of the best effortparameter in the ATM Traffic Descriptor InformationElement. This attribute is only used for SPVC con-nections. It is one of the Broadband Bearer Capabil-ity attributes. The value indicated implies that thequality of service for this connection is not guaran-teed. The value notIndicated implies that the qualityof service for this connection is guaranteed. Thevalue derivedFromServiceCategory specifies thatthe actual value which is used for this connection isderived from the value of the atmServiceCategory.Either, this attribute must be set to derivedFromSer-viceCategory, or the atmServiceCategory attributemust be set to derivedFromBBC, but not both.

Class NA

Presence required

Visibility customer

Range indicated, notIndicated, derivedFromServiceCat-egory


257



bwdQosClass

Parameter name bwdQosClass

Domain

Description This attribute specifies the quality of service for thebackward direction for this connection. This attrib-ute is only used for SPVC connections. Class 1supports a QOS that meets Service Class A per-formance requirements (Circuit emulation, constantbit rate video). Class 2 supports a QOS that meetsService Class B performance requirements(Variable bit rate audio and video). Class 3 supportsa QOS that meets Service Class C performance re-quirements (Connection-Oriented Data Transfer).Class 4 supports a QOS that meets Service ClassD performance requirements (Connectionless DataTransfer). Class 0 is the unspecified bit rate QOSclass; no objective is specified for the performanceparameters. The sameAsFwd selection sets thebackward quality of service to be the same as theforward quality of service.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4, sameAsFwd


Initial value sameAsFwd

bwdQosParameters

Parameter name bwdQosParameters

Domain

Description This attribute is a vector of two elements that spe-cify the quality of service parameters for the back-ward direction for this connection. This attribute isused for SPVC connections. The cdv specifies theacceptable peak-to-peak Cell Delay Variation(CDV) of real-time connections (CBR and rt-VBR).It is signaled through the extended QoS informationelement. For nrt-VBR and UBR, the CDV is irrelev-ant, and its value is forced to the default. The clrspecifies the acceptable Cell Loss Ratio (CLR) ofCBR, rt- VBR, and nrt-VBR connections. It is

258


signaled through the extended QoS information ele-ment. For UBR the CLR is irrelevant, and its valueis forced to the default.

Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Fixed[cdv,clr] List of Decimal

Initial value 16777215,255

clippingBbc

Parameter name clippingBbc

Domain

Description This attribute specifies the value for the clippingsusceptibility parameter in the BBC Information Ele-ment. This attribute is only used for SPVC connec-tions. It is one of the Broadband Bearer Capabilityattributes. Clipping is an impairment in which thefirst fraction of a second of information to be trans-ferred is lost. It occurs after a call is answered andbefore an associated connection is switchedthrough.

Class NA

Presence required

Visibility customer

Range no, yes


Initial value no

forceTagging


Domain

Description This attribute specifies whether force tagging of theCLP bit is enforced for cells of this connection.Force tagging can be enabled for permanent con-nections of any service category and on switchedconnections of UBR service category. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, and 1pOC48ChSmIrAtmcards, and for Vpts, this attribute is not applicable

259


and is ignored. A value of sameAsCa means theforce tagging functionality is determined by the for-ceTagging attribute under the CA service categorycomponent. A value of enabled means force tag-ging is enabled. When this option is selected, theCLP bit is set to 1 for all cells on the connection. Avalue of disabled means force tagging is disabled.When this option is selected, the CLP bit is un-changed for cells on the connection. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, force tagging applies tocells in the receive direction. For all other cards,force tagging applies to cells in the transmit direc-tion. In this case, cells which are tagged are coun-ted in the txCellClp attribute.

Class NA

Presence required

Visibility customer

Range sameAsCa, enabled, disabled



fwdQosClass

Parameter name fwdQosClass

Domain

Description This attribute specifies the quality of service for theforward direction for this connection. This attributeis only used for SPVC connections. Class 1 sup-ports a QOS that meets Service Class A perform-ance requirements (circuit emulation, constant bitrate video). Class 2 supports a QOS that meetsService Class B performance requirements(variable bit rate audio and video). Class 3 supportsa QOS that meets Service Class C performance re-quirements (Connection-Oriented Data Transfer).Class 4 supports a QOS that meets Service ClassD performance requirements (Connectionless DataTransfer). Class 0 is the unspecified bit rate QOSclass; no objective is specified for the performanceparameters.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4

260



Initial value 0

fwdQosParameters

Parameter name fwdQosParameters

Domain

Description This attribute is a vector of three elements that spe-cify the quality of service parameters for the forwarddirection for this connection. This attribute is usedfor SPVC connections. The cdv element specifiesthe acceptable peak-to-peak Cell Delay Variation(CDV) of real-time connections (CBR and rt-VBR).It is signaled through the extended QoS informationelement. For nrt- VBR and UBR the CDV is irrelev-ant, and its value is forced to the default. The ctdspecifies the acceptable maximum Cell TransferDelay (maxCtd) of real-time connections (CBR andrt-VBR). It is signaled through the end to end transitdelay information element. For nrt-VBR and UBRthe CTD is irrelevant, and its value is forced to thedefault. The clr specifies the acceptable Cell LossRatio (CLR) of CBR, rt- VBR, and nrt-VBR connec-tions. It is signaled through the extended QoS in-formation element. For UBR the CLR is irrelevant,and its value is forced to the default.

Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Fixed[cdv,ctd,clr] List of Decimal

Initial value 16777215,16777215,255

holdingPriority


Domain

Description This attribute specifies the holding priority of thisconnection. In a situation where the link bandwidthfluctuates, such as over an IMA link, holding priorityis used to determine which connections are heldand which are released. Holding priority 4 connec-tions are the first to be released. Holding priority 0connections are the last to be released. The defaultholding priority for a provisioned connection is high-

261


er then default holding priorities for dynamic (SVC)connections. The value of this attribute may beoverridden by certain applications, for example VccTest, which use this connection. This attribute is notapplicable for Vpt Vccs.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 2

rxPacketWiseDiscard

Parameter name rxPacketWiseDiscard

Domain

Description This attribute specifies whether packet-wise discardfunctions are to be enabled or disabled in the re-ceive data direction for this connection. Packet-wisediscard functions apply to AAL5 frame traffic. Thisattribute is not applicable for Vpts. Packet-wisefunctions increase the "goodput" of the link. The re-ceive packet-wise function is Partial Packet Discard(PPD). PPD allows the connection to discard the re-mainder of a cell- forwarded AAL5 frame if one cellof this frame has been discarded, for example dueto UPC. All cells are discarded up to but not includ-ing the EOM cell. The PPD function increases the"goodput" of the link, since cells which are only go-ing to be discarded at the AAL5 reassembly pointare not transmitted. For 1pOC12SmLrAtm cards,this attribute is not applicable and is ignored. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, PPD is availableat all VCC connection points where UPC may beactivated. PPD is not applicable for Vpcs. Packet-wise discards should only be enabled for connec-tions carrying AAL5 segmentation traffic. Setting thevalue to enabled for any other traffic type may resultin traffic being discarded. PPD is automatically en-abled at frame-to-cell conversion points, independ-ent of the setting of this attribute. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,

262


and MSA32 cards, this attribute may safely be setto enabled for any connection (Vcc or Vpc) sincethese FPs have the ability to automatically detectAAL5-segmented traffic on a connection, and onlyenable packet-wise discards if AAL5- segmentedtraffic is detected. For 1pOC48ChSmIrAtm cards,this attribute may safely be set to enabled forVCCs, since these FPs have the ability to automat-ically detect AAL5-segmented traffic on a connec-tion, and only enable packet-wise discards ifAAL5-segmented traffic is detected. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, packet-wise discard func-tions include EPD and PPD. PPD and EPD apply toindividual VCCs. Packet-wise discard should onlybe enabled for connections carrying AAL5 segment-ation traffic. Setting this attribute to enabled for anyother traffic type may result in all traffic being dis-carded. For 16pOC3PosAtm and 4pMRPosAtmcards, packet-wise discard functions are not avail-able for the receive data direction of a connection.A value of enabled for the rxPacketWiseDiscard at-tribute is used only for signaling SPVC/SPVP setupacross the network, and does not result in enablingpacket-wise discard functions on these cards. PPDand EPD are enabled by default at a connection en-dpoint which is performing AAL5 segmentation andassembly. A value of enabled means packet-wisediscard functions are applied to receive traffic at thisconnection point. A value of disabled means pack-et-wise discard functions are not applied to receivetraffic at this connection point. At a SPVC origin ona PNNI interface, a value of enabled specifies thatframe discard is requested in the forward direction.When this attribute is set to disabled, forward framediscard is not requested in the SPVC call setup.The receive packet-wise discard functions that areactive are visible in the Vcc/Vpc Tm rxPacket-WiseDiscard operational attribute.

Class NA

Presence required

Visibility customer




rxTrafficDescParm

263



Domain

Description This attribute is a vector of five traffic parameterswhose meanings are defined by the rxTrafficDesc-Type attribute. If the value of the rxTrafficDescTypeattribute is sameAsTx, the values provisioned in thisattribute are ignored. The traffic parameters for thereceive direction are taken from the txTraffic-DescParm attribute. The values of peak cell rate(PCR), sustained cell rate (SCR), and Minimum CellRate (MCR) are expressed in cell/s. Maximum burstsize (MBS) is expressed in cells. The value of CD-VT is expressed in microseconds. The values ofPCR, SCR, MCR, MBS and CDVT are used for us-age parameter control (UPC). When rxTrafficDesc-Type is 1 or 2, all of the parameters must be set tozero (unused). When rxTrafficDescType is 3, para-meter 1 represents the PCR for CLP equal to 0 and1 traffic; and parameter 4 represents the CDVT.Parameter 1 must be non-zero. Parameters 2 and 3must be set to zero (unused). When rxTrafficDesc-Type is 4, parameter 1 represents the PCR for CLPequal to 0 and 1 traffic; parameter 2 represents thePCR for CLP equal to 0 traffic with cell discard; andparameter 4 represents the CDVT. Parameters 1and 2 must be non-zero. Parameter 3 must be setto zero (unused). Parameter 1 must be greater thanor equal to parameter 2. When rxTrafficDescType is5, parameter 1 represents the PCR for CLP equalto 0 and 1 traffic; parameter 2 represents the PCRfor CLP equal to 0 traffic with cell tagging; and para-meter 4 represents the CDVT. Parameters 1 and 2must be non-zero. Parameter 3 must be set to zero(unused). Parameter 1 must be greater than orequal to parameter 2. When rxTrafficDescType is a6, parameter 1 represents the PCR for CLP equalto 0 and 1 traffic; parameter 2 represents the SCRfor CLP equal to 0 and 1 traffic; parameter 3 repres-ents the MBS for CLP equal to 0 and 1 traffic; andparameter 4 represents the CDVT. Parameters 1, 2and 3 must be non-zero. Parameter 1 must begreater than or equal to Parameter 2. When rxTraf-ficDescType is 7, parameter 1 represents the PCRfor CLP equal to 0 and 1 traffic; parameter 2 repres-ents the SCR for CLP equal to 0 traffic with cell dis-card; parameter 3 represents the MBS for CLPequal to 0 traffic; and parameter 4 represents theCDVT. Parameters 1, 2 and 3 must be non-zero.Parameter 1 must be greater than or equal to para-meter 2. When rxTrafficDescType is 8, parameter 1

264


represents the PCR for CLP equal to 0 and 1 traffic;parameter 2 represents the SCR for CLP equal to 0traffic with cell tagging; parameter 3 represents theMBS for CLP equal to 0 traffic; and parameter 4represents the CDVT. Parameter 1, 2 and 3 mustbe non-zero. Parameter 1 must be greater than orequal to parameter 2. When rxTrafficDescType is 9,parameter 1 represents the PCR; parameter 2 rep-resents the CDVT; parameter 3 represents theMCR. Parameter 4 is not used and must be zero.Parameter 1 must be non- zero and must be great-er than or equal to parameter 3. Parameter 3 mayoptionally be zero. If the value of CDVT either inparameter 2 or in parameter 4 is zero, the CDVT istaken from the CA defaults for the particular atm-ServiceCategory of this connection. Parameter 5 ofthe rxTrafficDescParm is always unused. When rx-TrafficDescriptorType is 3 through 8, there are cer-tain extreme combinations of rxTrafficDescParmwhich are outside the capabilities of the UPC hard-ware. The check prov command detects such casesand generates an error message. If this happens,adjust the parameters until they fall within the sup-ported limits. To calculate the limits, use the follow-ing formulae: I1 = 1,000,000,000 / PCR L1 = CDVT* 1000 I2 = 1,000,000,000 / SCR L2 = CDVT +(MBS - 1) * (I2 - I1) Note that I2 and L2 only applywhen the rxTrafficDescriptorType is 6 through 8.For 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, I1 and I2 mustbe less than or equal to 335,523,840. I1 + L1 mustbe less than or equal to 1,342,156,800. I2 + L2must be less than or equal to 1,342,156,800. If thevalues of I1, L1, I2 or L2 are closer to the limits de-scribed above, a further restriction applies. Specific-ally, if either: I1 > 41,940,480 or I2 > 41,940,480 orI1 + L1 > 167,769,600 or I2 + L2 > 167,769,600then both I1 and I2 must be greater than 20,480.For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, L2 must be less than orequal to 2,674,011,406. For 16pOC3PosAtm and4pMRPosAtm cards, L2 must be less than or equalto 17,179,869,180.

Class NA

Presence required

Visibility customer

Range [0..2147483647]


265



rxTrafficDescType


Domain

Description This attribute specifies the type of traffic manage-ment which is applied to the receive direction of thisconnection as defined in the ATM Forum. The rx-TrafficDescType determines the number and mean-ing of the parameters in the rxTrafficDescParm at-tribute. The value sameAsTx means the rxTraffic-DescType as well as the rxTrafficDescParm attrib-ute values are taken from the values of the txTraf-ficDescType and txTrafficDescParm attributes.

Class NA

Presence required

Visibility customer

Range 1, 2, 3, 4, 5, 6, 7, 8, 9, sameAsTx



trafficShaping


Domain

Description This attribute specifies whether this connectionuses traffic shaping when transmitting traffic to theATM interface. This attribute is ignored if the atm-ServiceCategory is availableBitRate. For1pOC12SmLrAtm and 1pOC48ChSmIrAtm cards,traffic shaping is not available, therefore this attrib-ute is ignored. A value of sameAsCa means trafficshaping for the connection is based on the value ofthe trafficShaping attribute of the connection's ser-vice category component under the CA. If the ser-vice category has trafficShaping set to enabled orinverseUpc, then traffic shaping is enabled for theconnection. Note that enabling traffic shaping mayhave no effect under certain cases. These casesare listed in the description of the trafficShaping op-erational attribute, which is under the Vcc Tm, VpcTm, or Vpt Tm components. A value of disabledmeans traffic shaping for this connection is disabledregardless of the provisioning of the connection's

266


service category component.

Class NA

Presence required

Visibility customer




transferCapabilityBbc

Parameter name transferCapabilityBbc

Domain

Description This attribute specifies the transfer capability for thisconnection. Uni 3.0/3.1 traffic type and end-to-endtiming parameters are mapped into this parameteras follows: <transferCapability: TrafficType, Timing>0: NoIndication, NoIndication 1: NoIndication, yes 2:NoIndication, no 5: CBR, yes 8: VBR, NoIndication9: VBR, yes 10: VBR, no The value notApplicablespecifies that the user does not want to specify thetransfer capability. The CBR traffic type refers totraffic offered on services such as a constant bitrate video service or a circuit emulation. The VBRtraffic type refers to traffic offered on services suchas packetized audio and video, or data. The valueno indication for traffic type is used if the user hasnot set the traffic type; similarly for end-to-end tim-ing. The value yes for end-to-end timing indicatesthat end-to-end timing is required. The value no forend-to-end timing indicates that end-to-end timing isnot required. The value derivedFromServiceCat-egory specifies that the actual value which is usedfor this connection is derived from the value of theatmServiceCategory. Either, this attribute must beset to derivedFromServiceCategory, or the atmSer-viceCategory attribute must be set to derived-FromBBC, but not both.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 5, 8, 9, 10, notApplicable, derivedFromSer-viceCategory



267


txPacketWiseDiscard

Parameter name txPacketWiseDiscard

Domain

Description This attribute specifies whether packet-wise discardfunctions are to be enabled or disabled in the trans-mit data direction for this connection. Packet-wisediscard functions apply to AAL5 frame traffic. Thisattribute is not applicable for Vpts. Packet-wisefunctions increase the "goodput" of the link. Thetransmit packet-wise functions are Early PacketDiscard (EPD) and Partial Packet Discard (PPD).EPD allows the connection to discard an entireframe once the transmit queue has reached theEPD threshold. EPD increases the "goodput" of alink, since discarding an entire frame means thatsome queue capacity is guarded for some otherframe which is already partially transmitted. All cellsof the frame are discarded from the Beginning ofMessage (BOM) cell up to and including the End ofMessage (EOM) cell. PPD allows the connection todiscard the remainder of a cell- forwarded AAL5frame if one cell of this frame has been discarded.All cells are discarded up to but not including theEOM cell. The PPD function increases the "good-put" of the link, since cells which are only going tobe discarded at the AAL5 reassembly point are nottransmitted. For 1pOC12SmLrAtm cards, this attrib-ute is not applicable and is ignored. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, the packet-wisediscard functions are PPD and EPD. PPD is applic-able at cell-transfer points. PPD is not applicable atframe-to- cell conversion points, and is not applic-able for Vpcs. PPD is configured by this attribute.Packet-wise discard should only be enabled forconnections carrying AAL5 segmentation traffic.Setting this attribute to enabled for any other traffictype may result in all traffic being discarded. EPD isautomatically enabled at frame-to-cell conversionpoints, independent of the setting of this attribute.For 2pOC3MmAtm2, 2pOC3SmAtm2,2pSTM1eAtm, 2pSTM1eCh, 2pSTM1Ch,2pOC3Ch, 4pOC3Ch, 4pOC3MmAtm,4pOC3SmIrAtm, 4pDS3ChAtm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm, and MSA32cards, packet-wise discard functions include EPDand PPD. PPD and EPD apply to individual VCCsand VCCs within VPCs at all connection points, in-

268


cluding tandem VPC connections. Both PPD andEPD are controlled by this attribute. This attributemay safely be set to enabled for any connection(Vcc or Vpc) since these FPs have the ability toautomatically detect AAL5-segmented traffic on aconnection, and only enable packet-wise discards ifAAL5-segmented traffic is detected. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, packet-wise discard func-tions include EPD and PPD. PPD and EPD apply toindividual VCCs, as well as VCCs within VPCs atthe VPC termination points, known as VPTs. PPDand EPD do not apply to tandem VPC connectionpoints. Packet-wise discard should only be enabledfor connections carrying AAL5 segmentation traffic.Setting this attribute to enabled for any other traffictype may result in all traffic being discarded. For16pOC3PosAtm, 4pMRPosAtm and1pOC48ChSmIrAtm cards, packet-wise discardfunctions include EPD and PPD. PPD and EPD ap-ply to individual VCCs, as well as VCCs withinVPCs at the VPC termination points, known asVPTs. PPD and EPD do not apply to tandem VPCconnection points. This attribute may safely be setto enabled for VCCs since these FPs have the abil-ity to automatically detect AAL5-segmented trafficon a connection, and only enable packet-wise dis-cards if AAL5-segmented traffic is detected. A valueof enabled means packet-wise discard functions areapplied to transmit traffic at this connection point. Avalue of disabled means packet-wise discard func-tions are not applied to transmit traffic at this con-nection point. At a SPVC origin on a PNNI interface,a value of enabled specifies that frame discard isrequested in the backward direction. When this at-tribute is set to disabled, backward frame discard isnot requested in the SPVC call setup. The transmitpacket-wise discard functions that are active arevisible in the Vcc/Vpc Tm txPacketWiseDiscard op-erational attribute.

Class NA

Presence required

Visibility customer




269


txQueueLimit


Domain

Description This attribute specifies an override to the defaulttransmit queue limit for this connection. A value ofsameAsCa means that the default common or per-VC transmit queue limit, as defined by the CA ser-vice category, is used for this connection. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, the valuesameAsCa must be specified. A value from 5 to512,000 means that the connection transmit queuelimit differs from the default common or per-VCtransmit queue limit, as defined by the CA servicecategory. A value other than sameAsCa is ignoredfor connections where common queuing is specifiedfor the service category. For 1pOC48ChSmIrAtmcards, this attribute is used to set the per- VC utiliz-ation limit of the service category common queue.For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, the valid range for this at-tribute is from 5 to 512000 inclusive. For16pOC3PosAtm cards, the valid range for this at-tribute is from 32 to 261120 inclusive. For4pMRPosAtm cards, the valid range for this attrib-ute is from 32 to 1011840 inclusive. On all othercards, the valid range for this attribute is from 5 to63488 inclusive. The actual transmit queue limit fora connection is visible in the Vcc Tm, Vpc Tm orVpt txQueueThresholds attribute. This attribute isnot applicable for basic Vpts.

Class NA

Presence required

Visibility customer

Range { [5..1011840],sameAsCa }



txTrafficDescParm


Domain

Description This attribute is a vector of five traffic parameterswhose meanings are defined by the txTrafficDesc-Type attribute. The values of peak cell rate (PCR),

270


sustained cell rate (SCR), Minimum Cell Rate(MCR) and requested shaping rate are expressedin cell/s. Maximum burst size (MBS) is expressed incells. CDVT is expressed in microseconds. The val-ues of PCR, SCR, MCR, MBS and CDVT are usedfor connection admission control (CAC). The valueof CDVT is only used for connections where theatmServiceCategory is constantBitRate. For all oth-er values of atmServiceCategory, CDVT is ignored.The values of PCR, SCR, MCR and requestedshaping rate are used to determine the actual shap-ing rate where traffic shaping is enabled. When tx-TrafficDescType is 1 or 2, all of the parametersmust be set to zero. When txTrafficDescType is 3,parameter 1 represents the PCR for CLP equal to 0and 1 traffic; parameter 4 represents the CDVT;and parameter 5 represents the requested shapingrate. A non-zero value in parameter 5 overrides anyvalue in parameter 1. This result is used as thePCR. Parameter 1 must be non-zero. Parameters 2and 3 must be zero. When txTrafficDescType is 4,parameter 1 represents the PCR for CLP equal to 0and 1 traffic with cell discard; parameter 2 repres-ents the PCR for CLP equal to 0 traffic; parameter 4represents the CDVT; and parameter 5 representsthe requested shaping rate. A non-zero value inparameter 5 overrides any value in parameter 1.This result is used as the PCR. Parameter 1 mustbe greater than or equal to parameter 2. Paramet-ers 1 and 2 must be non-zero. Parameter 3 must bezero. When txTrafficDescType is 5, parameter 1represents the PCR for CLP equal to 0 and 1 trafficwith cell tagging; parameter 2 represents the PCRfor CLP equal to 0 traffic; parameter 4 representsthe CDVT; and parameter 5 represents the reques-ted shaping rate. A non-zero value in parameter 5overrides any value in parameter 1. This result isused as the PCR. Parameter 1 must be greaterthan or equal to parameter 2. Parameters 1 and 2must be non-zero. Parameter 3 must be zero.When txTrafficDescType is 6, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0 and1 traffic; parameter 3 represents the MBS for CLPequal to 0 and 1 traffic; parameter 4 represents theCDVT; and parameter 5 represents the requestedshaping rate. A non-zero value in parameter 5 over-rides any value in parameter 1. This result is usedas the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal toparameter 2. Parameter 5, must either be zero

271


(unused) or greater than or equal to parameter 2.When txTrafficDescType is 7, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0 withcell discard; parameter 3 represents the MBS forCLP equal to 0 traffic; parameter 4 represents theCDVT; and parameter 5 represents the requestedshaping rate. A non-zero value in parameter 5 over-rides any value in parameter 1. This result is usedas the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal toparameter 2. Parameter 5, must either be zero(unused) or greater than or equal to parameter 2.When txTrafficDescType is 8, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0traffic with cell tagging; parameter 3 represents theMBS for CLP equal to 0 traffic; parameter 4 repres-ents the CDVT; and parameter 5 represents the re-quested shaping rate. A non-zero value in paramet-er 5 overrides any value in parameter 1. This resultis used as the PCR. Parameters 1, 2 and 3 must benon-zero. Parameter 1 must be greater than orequal to parameter 2. Parameter 5, must either bezero (unused) or greater than or equal to parameter2. When txTrafficDescType is 9, parameter 1 rep-resents the PCR; parameter 2 represents the CD-VT; parameter 3 represents the MCR; parameter 4and parameter 5 represent are not used and mustbe zero. Parameter 1 must be non-zero and mustbe greater than or equal to parameter 3. Parameter3 may be optionally zero. Whenever it is valid forPCR to be specified, parameter 5 may also be usedto specify a requested shaping rate. A non-zerovalue in parameter 5 overrides the value in para-meter 1 and is used as the peak cell rate in calcula-tions of CAC and shaping rate. When the atmSer-viceCategory is availableBitRate (ABR), the shap-ing rate is dynamically chosen, based on the ABRflow control mechanism, as a value between theMCR and the PCR or the requested shaping rate ifapplicable. For txTrafficDescType 3, 4 and 5, thetransmit traffic is shaped at the next available shap-ing rate less than the PCR. For txTrafficDescType6, 7 and 8 if linear traffic shaping is selected, thetransmit traffic is shaped at the highest availablerate which is between PCR and SCR. However, ifthere is no available shaping rate between PCRand SCR, traffic is shaped at the next rate abovethe PCR. For txTrafficDescType 3 ,4,5,6,7 and 8,with 16pOC3PosAtm and 4pMRPosAtm cards,

272


parameter 4 must be less than or equal to 643,000.For txTrafficDescType 6, 7 and 8 if inverse-UPCtraffic shaping is selected, the transmit traffic isshaped at a variable rate which conforms to thePCR, SCR and MBS of the connection trafficdescriptor.

Class NA

Presence required

Visibility customer

Range [0..2147483647]



txTrafficDescType


Domain


Class NA

Presence required

Visibility customer

Range 1, 2, 3, 4, 5, 6, 7, 8, 9


Initial value 1

txWredMode

Parameter name txWredMode

Domain

Description This attribute specifies the activation of weightedrandom early detection (WRED) functionality.WRED is considered a packet- wise discard func-tion and as such applies only to AAL5 frame traffic.WRED is applied in the transmit direction for thisconnection. WRED function should be enabled onlyfor connections which are transferring TCP/IPtraffic. WRED acts to prevent synchronization ofmultiple TCP/IP sources by randomly discarding a

273


small percentage of frames when transmit queuecongestion reaches the designated level. WREDmay also be used to differentiate service on VCC'sby preferentially discarding one VCC before anoth-er. Discards start at 0% of cells, when the queue ispart-way to the Early Packet Discard (EPD)threshold, and rise to 100% of cells discarded at theEPD threshold. WRED discards all the cells in aframe. A value of enabled means WRED is enabledfor all applications linked to the given Vcc. A valueof perFlow means each TCP application has indi-vidual control over whether to enable or disableWRED. If the value of the txPacketWiseDiscard at-tribute is disabled, or if the value of this attribute isdisabled, WRED functionality is disabled. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, and 1pOC12SmLrAtmcards, the value of this attribute must be disabled. IfWRED is active, it is visible in the Vcc/Vpc Tm tx-PacketWiseDiscard operational attribute. This at-tribute is not applicable for Vpts or Vpt Vccs.

Class NA

Presence required

Visibility customer

Range disabled, enabled, perFlow



txWredThreshold

Parameter name txWredThreshold

Domain

Description This attribute specifies the threshold for weightedrandom early detection (WRED). This threshold iscalculated as a percentage of the early packet dis-card (EPD) threshold, which is 85% of the transmitqueue length. When the value is 25%, WRED startsas soon as the queue is 25% of the way to the EPDthreshold. When the value is 50%, WRED startslater, after the queue is 50% of the way to the EPDthreshold. When the value is 75%, WRED startsonly when the queue is 75% of the way to the EPDthreshold. This attribute is ignored if the value of thetxWredMode or txPacketWiseDiscard attributes isdisabled. For 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,

274


8pE1Atm, 8pDS1Atm, 2pJ6MAtm, and1pOC12SmLrAtm cards, this attribute is not applic-able and is ignored.

Class NA

Presence required

Visibility customer

Range 25, 50, 75


Initial value 25



Domain

Description This attribute specifies the transmit queuing methodfor this connection if it is unshaped. The two pos-sible methods are per-VC queuing and commonqueuing. This attribute does not apply if the connec-tion is shaped. A value of sameAsCa means thetransmit queuing method for the connection isbased on the unshapedTransmitQueueing attributeof the connection's service category component un-der the CA. A value of common means transmittraffic on this unshaped connection is destined forthe common queue. For 2pOC3MmAtm2,2pOC3SmAtm2, 2pSTM1eAtm, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch, 4pOC3MmAtm,4pOC3SmIrAtm, 4pDS3ChAtm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm, MSA32,1pOC12SmLrAtm, 4pOC12SmIrAtm,4pOC12SmLrAtm, 16pOC3SmIrAtm,16pOC3PosAtm, 1pOC48ChSmIrAtm, and4pMRPosAtm cards, this attribute must have thevalue sameAsCa. This attribute is ignored in the fol-lowing situations: - if the connection has traffic-Shaping enabled or inverseUpc, or - if the atmSer-viceCategory is availableBitRate, or - if the atmSer-viceCategory is constantBitRate, or - for basic Vptsand standard Vpt Vccs.

Class NA

Presence required

Visibility customer

Range common, sameAsCa


275





Domain

Description This attribute specifies whether this connection en-ables usage parameter control (UPC) when receiv-ing traffic from the ATM interface. The valuesameAsCa means UPC for the connection is basedon the value of the usageParameterControl attributeof the service category component under the AtmIfCA. If the service category has UPC enforced ormonitored, then UPC is enabled on the connection.The value disabled means UPC for this connectionis disabled regardless of the provisioning of the ser-vice category. The value enforced means UPC forthis connection is enforced regardless of the provi-sioning of the service category. When UPC is en-forced, non-conforming cells are either tagged ordiscarded depending on the rxTrafficDescriptor-Type. The value monitored means UPC for thisconnection is monitored regardless of the provision-ing of the service category. When UPC is mon-itored, instead of the non-conforming cells beingtagged or discarded, they are merely counted in theUPC violations counts and passed on unchanged.Note that setting UPC to enforced or monitored mayhave no effect under certain cases. These casesare listed in the description of the usagePara-meterControl operational attribute, which is underthe Vcc, Vpc, and Vpt components. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, the value mon-itored is not supported. For 1pOC48ChSmIrAtmcards, the values enforced, and monitored, are notsupported.

Class NA

Presence required

Visibility customer

Range enforced, disabled, sameAsCa, monitored



276


weight

Parameter name weight

Domain

Description This attribute specifies an override for the weight ofthis unshaped connection. This attribute is ignoredfor shaped connections, for ABR connections, andbasic Vpts. A value of sameAsCa means the weightis determined by the weightPolicy attribute underthe CA service category component for all butstandard Vpt Vccs. For standard Vpt Vccs, theweight is determined by the Vcc's service category,when the value is set to sameAsCa. A value from 1to 4095 means that value is used for the fairnessweight of this connection relative to other connec-tions. For all but standard Vpt Vccs, fairness weightdetermines the proportion of transmit cell opportun-ities which are allocated to this connection, com-pared to other connections in the same service cat-egory. For standard Vpt Vccs, fairness weight de-termines the proportion of transmit cell opportunitieswhich are allocated to this connection, compared toother connections associated with the Vpt. A valueof upToQueueLimit means the fairness weight islimited only by the txQueueLimit. This attribute isnot applicable and is ignored for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,1pOC12SmLrAtm, and 1pOC48ChSmIrAtm cards.For 4pOC12SmIrAtm, 4pOC12SmLrAtm,16pOC3SmIrAtm, 16pOC3PosAtm, and4pMRPosAtm cards, the value upToQueueLimit isnot permitted.

Class NA

Presence required

Visibility customer

Range { [1..4095],upToQueueLimit, sameAsCa }



277


54 AtmUni (Uni)






Parents:

EM - AtmIf - Uni

Child(ren):

Addr - Ilmi - Sig -

Identifiers:

-

Links:


Parameters:

accountClass


Domain

Description This attribute specifies the accounting class associ-ated with the interface. Its meaning is determinedby the network operator. Its value is simply recor-ded in the accounting records generated by this in-terface, in the attribute callingServiceType or called-ServiceType as appropriate.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

278


Initial value 0

accountCollection


Domain

Description This attribute is used to turn accounting on or off forSVC and SPVC connections. It also specifies thereason(s) for which accounting data is collected:billing, test, study, audit or force. If the set of reas-ons is not empty then accounting records will begenerated by this interface in the following situ-ations: - on a TODA changeover if TODA is en-abled; - every 12 hours (per connection) if TODA isdisabled; - on every call clear (a call record with fi-nal cell counts). If none of the reasons is present,then accounting will be suppressed. The reason forcollection is recorded in the accounting record, inthe attribute callingCollectReason or calledCol-lectReason as appropriate.

Class NA

Presence optional

Visibility customer


Data type Set of

Initial value



Domain

Description This attribute specifies whether accounting recordsgenerated by this interface should be marked asoriginating, terminating or intermediate. This attrib-ute, in combination with the direction of the call, de-termines the value of attribute connPointType of theaccounting record and may be used by downstreamaccounting processes to correlate the records. If thevalue is origTerm then records generated for incom-ing calls will be marked as originating and recordsgenerated for outgoing calls will be marked as ter-minating. If the value is intermediate then recordsgenerated for all calls will be marked as intermedi-ate.

Class NA

279


Presence required

Visibility customer



Initial value origTerm

interfaceType

Parameter name interfaceType

Domain

Description This attribute represents the Type of the interface,private or public.

Class NA

Presence required

Visibility customer

Range public, private


Initial value private

loopPrevention

Parameter name loopPrevention

Domain

Description This attribute specifies whether loop prevention is ineffect on this interface. When the value is enabled,incoming calls on this interface cannot be routedback out the same interface. When the value is dis-abled, routing of incoming calls back out the sameinterface is permitted. The recommended value isenabled. The value disabled should only be used ifrouting of incoming calls back out over this interfaceis actually required. As an example, the value dis-abled might be needed if the interface is connectedto an end-user multiplexing device which has norouting capability. Note that setting the value to en-abled prevents only routing loops which involve twonetwork nodes.

Class NA

Presence required

Visibility customer


280




serviceExchange


Domain

Description This attribute specifies the data service exchangeassociated with this interface. Its meaning is de-termined by the network operator. Its value issimply recorded in the accounting records gener-ated by this interface, in the attribute callingDse orcalledDse as appropriate.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 0

side

Parameter name side

Domain

Description This attribute indicates which side the interface is,user or network.

Class NA

Presence required

Visibility customer

Range network, user


Initial value network

softPvpAndPvcHoldOffTime

Parameter name softPvpAndPvcHoldOffTime

Domain

Description This attribute specifies how long to hold off retriesfollowing the release of a connection. Due to theway group timers are implemented, it can take from

281


100% to 150% of the provisioned timer to triggerthe desired action. Since SPVC retries are paced,in cases where there are many connections, the en-tire process can take more than 150% of the provi-sioned timer value.

Class NA

Presence required

Visibility customer

Range { [50..20000],0 }


Initial value 0

softPvpAndPvcRetryPeriod

Parameter name softPvpAndPvcRetryPeriod

Domain

Description This attribute represents the time in seconds to waitbetween soft PVP or soft PVC call setup retries.Due to the group timer implementation, it can takefrom 100% to 150% of the provisioned timer valuefor the retry to be triggered.

Class NA

Presence required

Visibility customer

Range [20..999999]

Data type Decimal

Initial value 60

version

Parameter name version

Domain

Description This attribute specifies which specification the UNIcomplies with. The options are ATM FORUM 3.0,ATM FORUM 3.1 or ATM FORUM 4.0. If this attrib-ute is changed then all switched Vcc components inthis interface are cleared due to the fact that the twoversions are incompatible.

Class NA

Presence required

Visibility customer

282


Range atmForum30, atmForum31, atmForum40


Initial value atmForum40

283


55 AtmUniAddress (Addr)






Parents:

EM - AtmIf - Uni - Addr

Child(ren):

PnniInfo - TermSP - UniInfo -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n Uni Address/address,type AtmIf/n Vpt/m UniAddress/address,type This component representsan address (dynamic or static) associated with theinterface. The index is a string of 1 to 40 hex digitsor a single wild-card ('?'), and a type. The type iden-tifies whether the Address component is for aprimary, alternate, registered, or default address.The types primary and alternate are used for provi-sioned addresses. The type registered is used fordynamic addresses through ILMI. The type default

284


is used for Soft PVP and Soft PVC addresses. Vir-tual interfaces do not have addresses of type de-fault. The wild-card is only valid for provisioned ad-dresses. If the address is a single wild-card, thenthat indicates that the interface supports all ad-dresses. If there is no better match, then this inter-face may be chosen in the routing. If there is morethan one interface with a single wild-card static ad-dress, then the choice is made using a round robinalgorithm. The round robin algorithm first tries theprimary routes. If none of the primary routes suc-ceed, then the alternate routes are tried. Note thatthe UniInfo and PnniInfo sub-components are mutu-ally exclusive. Only one of these may be added un-der the AtmIf Uni Addr component.

Class NA

Presence required

Visibility customer

Unit

Range [1..40],[primary, alternate, registered, default]

Data Type AsciiString,Enumeration

Initial Value

285


56 AtmUniAddressUniInfo (UniInfo)






Parents:

EM - AtmIf - Uni - Addr - UniInfo

Child(ren):

-

Identifiers:

-

Links:


Parameters:

pnniReachability

Parameter name pnniReachability

Domain

Description This attribute indicates whether the address is in-ternal or exterior. An internal reachable address isan address of a destination that is directly attachedto the logical node advertising the address. An ex-terior reachable address is an address that can bereached through a PNNI routing domain, but whichis not located in that PNNI routing domain.

Class NA

Presence required

Visibility customer

Range internal, exterior

286



Initial value internal

scope

Parameter name scope

Domain

Description This attribute specifies the address UNI member-ship scope. It specifies the inclusive routing hier-archy in which the address will be known. TheuseDefaultScope value maps to localNetwork forATM group addresses, and to global for individualaddresses. Note that this value is ignored for UNI3.x interfaces.

Class NA

Presence required

Visibility customer

Range useDefaultScope, localNetwork, localPlusOne, loc-alPlusTwo, siteMinusOne, intraSite, intra-SitePlusOne, organizationMinusOne, intraOrganiza-tion, organizationPlusOne, communityMinusOne,intraCommunity, communityPlusOne, regional, in-terRegional, global


Initial value useDefaultScope

287


57 AtmUnspecifiedBitRate (Ubr)





• Verbs: add,

Parents:

EM - AtmIf - CA - Ubr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n CA UnspecifiedBitRate/n This componentmanages the default characteristics of the unspe-cified bit rate (UBR) service category.

Class NA

Presence required

Visibility customer

Unit

Range [0..0]

288


Data Type Decimal

Initial Value

cdvt

Parameter name cdvt

Domain

Description This attribute specifies the default cell delay vari-ation tolerance (CDVT) for all connections of theUBR service category (including connections man-aged by a Vpt CA). An override to this default maybe specified for a provisioned connection under theVcd Tm or Vpd Tm component. If Usage ParameterControl (UPC) is enabled for a connection, CDVT isused by the UPC function to decide whether a cellis conforming or non-conforming based on the con-nection's traffic descriptor type. The larger the CD-VT value, the more tolerant is the UPC of band-width usage beyond the traffic contract.

Class NA

Presence required

Visibility customer

Range [1..1200000]

Data type Decimal

Initial value 250

emissionPriority


Domain

Description This attribute specifies the emission priority (EP)which is used to transmit traffic of the UBR servicecategory. A lower numerical value for this attributespecifies a higher emission priority. 0 is the highestEP and 7 is the lowest. Cells at a higher emissionpriority receive higher preference for link bandwidth.EP 0 and EP 1 are in the absolute priority rangeand are unaffected by any minimum bandwidthguarantees. EP 2 through EP 7 are in the guaran-teed bandwidth range and may achieve a prioritywhich is different from the strict hierarchical priority,if a minimum bandwidth guarantee is provisioned. Aminimum bandwidth guarantee is specified in theAtmIf/n Ep/m component. This attribute does notapply to basic VPTs, or standard Vpt VCCs. This at-

289


tribute is not applicable and is ignored for3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, and 1pOC12SmLrAtm cards, emission pri-ority setting must comply with all of the followingconstraints: 1. The emission priority numbers mustbe in the following order: CBR <= rt-VBR <= nrt-VBR <= ABR <= UBR 2. Two different ATM servicecategories may share the same EP only if they areboth shaped. 3. CBR and rt-VBR may be placedeither in the absolute priority range (EP 0 or 1) or inthe guaranteed bandwidth range (EP 2 through 7).4. If both CBR and rt-VBR are shaped, rt-VBR mustshare the same EP with CBR or ABR. If either oneof CBR or rt-VBR are not shaped, then they cannotshare the same EP. 5. ABR service category is al-ways deemed to be shaped. If nrt-VBR is shaped, itmust share the same EP with ABR. If nrt-VBR is notshaped it must have a higher EP than ABR. 6. IfUBR is shaped, it must share the same EP withABR. If UBR is not shaped, it must have a lower EPthan ABR. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards, emission priority set-ting must comply with all of the following con-straints: 1. The emission priority numbers must bein the following order: CBR <= rt-VBR <= nrt-VBR<= UBR 2. Two different ATM service categoriesmay share the same EP only if they are bothshaped. 3. EP 0 must be used if traffic shaping isrequired. 4. EP 5 and EP 6 are not supported. For16pOC3PosAtm and 4pMRPosAtm cards, emissionpriority setting must comply with all of the followingconstraints: 1. The emission priority numbers mustbe in the following order: CBR <= rt-VBR <= nrt-VBR <= UBR 2. Two different ATM service categor-ies may share the same EP only if they are bothshaped. For 1pOC48ChSmIrAtm cards, only the de-fault value is supported.

Class NA

Presence optional

Visibility customer

Range [0..7]

Data type Decimal

Initial value 7

290


forceTagging


Domain

Description This attribute specifies the default force tagging(CLP=1) value of all cells for all UBR connections.An override to this default may be specified for aprovisioned connection under the Vcd Tm or VpdTm component. A value of enabled means CLP isset to 1 for all cells. This is in conformance with theATM Forum TM4.0 UBR.2 service definition. Avalue of disabled means CLP is unchanged for allcells. This is in conformance with the ATM ForumTM4.0 UBR.1 service definition. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, force tagging applies tocells in the receive direction. For all other cards,force tagging applies to cells in the transmit direc-tion. This attribute does not apply to any type ofVpt. This attribute is not applicable and is ignoredfor 3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, 2pJ6MAtm, and 1pOC48ChSmIrAtmcards.

Class NA

Presence required

Visibility customer




holdingPriority


Domain

Description This attribute specifies the default holding prioritywhich applies to SVP and SVC UBR connections. Ittakes a value from 0 (highest priority) to 4 (lowestpriority). In a situation where the link bandwidth fluc-tuates, such as over an IMA link, holding priority isused to determine which connections are held andwhich are released. Holding priority 4 connectionsare the first to be released. Holding priority 0 con-nections are the last to be released. This attributedoes not apply to Vpt VCCs. When bandwidth fluc-tuates, the entire Vpt component, along with all Vpt

291


VCCs is released as a unit, according to the Vpt'sholdingPriority.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 3

maxVccs


Domain

Description This attribute specifies the maximum number ofUBR VCCs that can be activated on this AtmIf com-ponent, including UBR Vpt VCCs. The value of thisattribute must not exceed the maxVccs attribute ofthe parent CA component. A value of sameAsCameans the maximum number of VCCs is defined bythe AtmIf/n CA maxVccs attribute. Changes to thisattribute do not affect existing VCCs. If the value ischanged to a number smaller than the current num-ber of active UBR VCCs, no new UBR VCCs areadmitted until the number of active UBR VCCsdrops below the value of this attribute. The currentnumber of active UBR VCCs is indicated by theUbr/0 vccUsage operational attribute.

Class NA

Presence required

Visibility customer




maxVpcs

Parameter name maxVpcs

Domain

Description This attribute specifies the maximum number ofUBR VPCs that can be activated on this AtmIf com-ponent. The value of this attribute must not exceedthe maxVpcs attribute of the parent CA component.A value of sameAsCa means the maximum number

292


of VPCs is defined by the AtmIf/n CA maxVpcs at-tribute. Changes to this attribute do not affect exist-ing VPCs. If the value is changed to a numbersmaller than the current number of active UBRVPCs, no new UBR VPCs are admitted until thenumber of active UBR VPCs drops below the valueof this attribute. The current number of active UBRVPCs is indicated by the Ubr/0 vpcUsage opera-tional attribute.

Class NA

Presence required

Visibility customer




maxVpts

Parameter name maxVpts

Domain

Description This attribute specifies the maximum number ofUBR VPTs that can be activated on this AtmIf com-ponent. The value of this attribute must not exceedthe maxVpts attribute of the parent CA component.A value of sameAsCa means the maximum numberof VPTs is defined by the AtmIf/n CA maxVpts at-tribute. Changes to this attribute do not affect exist-ing VPTs. If the value is changed to a number smal-ler than the current number of active UBR VPTs, nonew UBR VPTs are admitted until the number ofactive UBR VPTs drops below the value of this at-tribute. The current number of active UBR VPTs isindicated by the Ubr/0 vptUsage operational attrib-ute.

Class NA

Presence required

Visibility customer




minPerVcQueueLimit

293



Domain

Description This attribute specifies the minimum queue limit forthe per-VC queues of connections of the UBR ser-vice category. This attribute is ignored for1pOC12SmLrAtm cards, because they do not sup-port per-VC queues for the UBR service category.The queue limit of a per-VC queue is obtained byscaling down the txQueueLimit attribute based onthe shaping rate of that queue (shaping rate for theconnection and for standard Vpt VCCs, the shapingrate of the Vpt). This produces a constant delay forvarious queue lengths. The value of thetxQueueLimit attribute provides an upper boundwhile the value of the minPerVcQueueLimit attributeprovides the lower bound. The value of this attributemust not be greater than the value of thetxQueueLimit attribute. If this service category isused by Trunks the value of the minPerVc-QueueLimit attribute must be at least 88. For VPTs,this attribute does not apply. Regardless of Vpt'sservice category, standard VPTs always use the At-mIf CA NrtVbr minPerVcQueueLimit value as theirdefault. To determine the queue limit of a standardVpt Vcc, the txQueueLimit attribute is scaled downby the Vpt shaping rate. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, and 2pJ6MAtmcards, this attribute must be set to the same valuefor CA NrtVbr, Abr, and Ubr components. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, and 1pOC48ChSmIrAtm cards, the validrange for this attribute is from 5 to 160000 inclusive.For 4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards, the valid range for this at-tribute is from 92 to 512000 inclusive. For16pOC3PosAtm cards, the valid range for this at-tribute is from 32 to 261120 inclusive. For4pMRPosAtm cards, the valid range for this attrib-ute is from 32 to 1011840 inclusive.

Class NA

Presence required

Visibility customer

Range [5..1011840]

Data type Decimal

294


Initial value 88

minimumCellRate

Parameter name minimumCellRate

Domain

Description This attribute specifies the minimum cell rate (MCR)which is allocated from the UBR bandwidth pool foreach UBR connection which is admitted using Con-nection Admission Control (CAC) (excluding con-nections managed by a Vpt CA). UBR connectionsnormally are serviced on a best effort basis, but thisattribute allows allocation of a default minimumbandwidth for each connection.

Class NA

Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value 0



Domain

Description This attribute specifies the shaping rate to be usedin computing the tolerable delay for per-VC queuesof connections of the UBR service category. Thedelay is computed as the txQueueLimit divided bythe value of this attribute. This attribute is ignoredfor 1pOC12SmLrAtm and 1pOC48ChSmIrAtmcards, because they do not support traffic shapingfor the UBR service category. A value of autoCon-figure means an appropriate value is selectedbased on the card type. For 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, 2pJ6MAtm, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch and4pDS3ChAtm cards, the value is 3685. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm, and3pDS3Atm cards, the value is 14740. For3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,4pOC3MmAtm, 4pOC3SmIrAtm, 16pOC3SmIrAtm,and 16pOC3PosAtm cards, the value is 65511. ForMSA32 cards, the value is 65511 for OC-3 chan-

295


nels, and 3685 for DS1, or E1 channels. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and4pMRPosAtm cards, the value is 262044. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, this attributemust be set to the same value for CA NrtVbr, Abr,and Ubr components. For 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards themaximum value is 1416905. For 16pOC3PosAtmcards, the maximum value is 353207. For4pMRPosAtm cards, the maximum value is1412830 for OC-12 ports and 5651320 for OC- 48ports. For all other cards, the maximum value is943396. For VPTs, this attribute does not apply.Regardless of the Vpt's service category, standardVPTs always use the AtmIf CA NrtVbr perVc-QueueLimitReferenceRate value as their default.

Class NA

Presence required

Visibility customer




pool

Parameter name pool

Domain

Description This attribute specifies the bandwidth pool which isto be used to support the unspecified bit rate (UBR)service category (excluding connections managedby a Vpt CA). The percentage of link capacity re-served for the given bandwidth pool is the maxim-um bandwidth that can be allocated to UBR traffic.The percentage allocated to each bandwidth poolcan be provisioned through the bandwidthPool at-tribute of the CA component. The amount of band-width reserved for each UBR connection is spe-cified in the minimumCellRate attribute.

Class NA

Presence required

Visibility customer



296


Initial value pool1



Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming cells for UBR servicecategory. If the count of discarded incoming UBRcells is greater than the provisioned value of this at-tribute in a 15 minute interval, the alarm is set.While the alarm is set, if the count of discarded in-coming UBR cells is still greater than the provi-sioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded incoming UBR cells drops belowthe provisioned value of this attribute in a 15 minuteinterval the alarm is cleared. Provisioned value of '0'means discarded incoming UBR cells are not mon-itored and no alarm is generated. While the alarm isset, if the value of this attribute is changed, thealarm is cleared. This attribute is not applicable for3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm and 2pJ6MAtm cards. This attribute isnot applicable for 4pOC12SmIrAtm and4pOC12SmLrAtm cards when channelized.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0



Domain

Description This attribute specifies the threshold for a minoralarm for discarded incoming frames for UBR ser-vice category. If the count of discarded incomingUBR frames is greater than the provisioned value ofthis attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedincoming UBR frames is still greater than the provi-

297


sioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded incoming UBR frames drops be-low the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded incoming UBR framesare not monitored and no alarm is generated. Whilethe alarm is set, if the value of this attribute ischanged, the alarm is cleared. This attribute is notapplicable for 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

shapeRecoupPolicy


Domain

Description This attribute specifies the shaping recoup policy forthe UBR service category. This is the policy whichis used to recoup shaping opportunities which arelost when more than one connection schedules acell for the same transmit opportunity. In this case,one connection is scheduled and the cell from theother connection is delayed by one cell time. Thisattribute affects how the transmit time is calculatedfor the next cell on the delayed connection. This at-tribute is ignored if this service category is notshaped. This attribute does not apply to basicVPTs, or standard Vpt VCCs. This attribute is notapplicable and is ignored for 4pOC12SmIrAtm,4pOC12SmLrAtm, and 16pOC3SmIrAtm cards.When the connection which was delayed schedulesthe next cell to transmit, it may calculate the time asa difference from either the previous actual celltransmit time, or the time when the previous cellshould have been transmitted. A value of maxim-umEfficiency results in each connection trying to re-coup or regain any delays in scheduling. The trans-mit time for the next cell is calculated from the time

298


when the previous cell should originally have beensent. Cell delay variation (CDV) occurs in this casesince the cells are sent with less than the shapingdelay between them. However, in general theshaper recovers (recoups) lost opportunities andimproves efficiency. A value of minimumCdv resultsin connections not trying to recoup or regain anydelays in scheduling. The transmit time for the nextcell is calculated from the time when the previouscell was actually transmitted. This minimizes CDV,but results in missed cell opportunities.

Class NA

Presence required

Visibility customer



Initial value maximumEfficiency



Domain

Description This attribute specifies the default holding prioritywhich applies to SVC UBR point-to-multipoint con-nections. It takes a value from 0 (highest priority) to4 (lowest priority). In a situation where the linkbandwidth fluctuates, such as over an IMA link,holding priority is used to determine which connec-tions are held and which are released. Holding pri-ority 4 connections are the first to be released.Holding priority 0 connections are the last to be re-leased. This attribute does not apply to Vpt VCCs.When bandwidth fluctuates, the entire Vpt compon-ent, along with all Vpt VCCs is released as a unit,according to the Vpt's holdingPriority.

Class NA

Presence required

Visibility customer

Range 0, 1, 2, 3, 4


Initial value 3

trafficShaping

299



Domain

Description This attribute specifies the default traffic shapingoption for connections of the UBR service category.An override to this default may be specified for aprovisioned connection under the Vcd Tm or VpdTm component. This attribute does not apply to ba-sic VPTs, or standard Vpt VCCs. A value of dis-abled means traffic shaping cannot be enabled forany UBR connections. For 1pOC12SmLrAtm and1pOC48ChSmIrAtm cards, the value of this attrib-ute must be disabled since traffic shaping is notsupported for UBR connections on these cards. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, the value of thisattribute may be enabled only if the interface sup-ports shaping, as defined by the perVcQueueInter-faces attribute of the Lp Eng Arc Cqc Ov compon-ent. If that component does not exist, the value ofthis attribute must be disabled. If the Vcc Tm, VpcTm, or Vpt Tm txTrafficDescType attribute indicatestype 1 or 2, this attribute is ignored and traffic shap-ing is not applicable for that connection. A value ofinverseUpc means traffic shaping for a connectionis enabled according to the value of the Vcc Tm,Vpc Tm, or Vpt Tm txTrafficDescType. A value ofinverseUpc when the txTrafficDescType is 3, 4, 5,or 9 (for UBR with MDCR connections), means lin-ear traffic shaping is enabled. Linear traffic shapinguses a single static traffic shaping rate. A value ofinverseUpc when the txTrafficDescType is 6, 7, or8, means inverse-UPC (also referred to as VBR ordual leaky bucket) traffic shaping is enabled. In-verse-UPC traffic shaping can burst above the sus-tained cell rate to the peak cell rate for the durationdefined by maximum burst size. Inverse-UPC trafficshaping exactly conforms to the requirements of adual leaky bucket UPC enforcer. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, the value inverseUpc is notavailable. For 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, and 2pJ6MAtm cards, thevalue inverseUpc is not supported and is equivalentto the value enabled. A value of enabled when thetxTrafficDescType is 3, 4, 5, 6, 7, 8, or 9 (for UBRwith MDCR connections), means traffic shaping fora connection is enabled using linear shaping. En-abling or disabling traffic shaping may require a

300


matching change to the emissionPriority attribute,and the unshapedTransmitQueueing attribute forthis service category. Refer to those attributes forthe complete description of the interactions.

Class NA

Presence required

Visibility customer






Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing cells for UBR servicecategory. If the count of discarded outgoing UBRcells is greater than the provisioned value of this at-tribute in a 15 minute interval, the alarm is set.While the alarm is set, if the count of discarded out-going UBR cells is still greater than the provisionedvalue of this attribute in the subsequent 15 minuteintervals, the alarm is not set again. If the count ofdiscarded outgoing UBR cells drops below the pro-visioned value of this attribute in a 15 minute inter-val the alarm is cleared. Provisioned value of '0'means discarded outgoing UBR cells are not mon-itored and no alarm is generated. While the alarm isset, if the value of this attribute is changed, thealarm is cleared. This attribute is not applicable for3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm and 2pJ6MAtm cards. This attribute isnot applicable for 4pOC12SmIrAtm and4pOC12SmLrAtm cards when channelized.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

301




Domain

Description This attribute specifies the threshold for a minoralarm for discarded outgoing frames for UBR ser-vice category. If the count of discarded outgoingUBR frames is greater than the provisioned value ofthis attribute in a 15 minute interval, the alarm isset. While the alarm is set, if the count of discardedoutgoing UBR frames is still greater than the provi-sioned value of this attribute in the subsequent 15minute intervals, the alarm is not set again. If thecount of discarded outgoing UBR frames drops be-low the provisioned value of this attribute in a 15minute interval the alarm is cleared. Provisionedvalue of '0' means discarded outgoing UBR framesare not monitored and no alarm is generated. Whilethe alarm is set, if the value of this attribute ischanged, the alarm is cleared. This attribute is notapplicable for 3pOC3MmAtm, 3pOC3SmAtm,3pE3Atm, 3pDS3Atm, 3pE1Atm, 3pDS1Atm,8pE1Atm, 8pDS1Atm, 2pJ6MAtm,4pOC12SmIrAtm, 4pOC12SmLrAtm and16pOC3SmIrAtm cards.

Class NA

Presence required

Visibility customer

Range [0..4294967295]


Initial value 0

txQueueLimit


Domain

Description This attribute specifies the default maximum queuelength for the emission queues used to buffer thetraffic of the UBR service category. It is used as thebasis for setting both the queue length and the dis-card thresholds on both common and per-VCqueues. For the common queue, the discardthresholds are set at approximately 35, 75, and 90percent of the value of this attribute for traffic at dis-card priority 3 (DP=3), DP=2, and DP=1 respect-ively. For 4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, common queuing is not

302


available for the UBR service category. For a per-VC queue, the actual queue length may be reduceddepending on the shaping rate of the connection(for standard Vpt VCCs, this is the shaping rate ofthe Vpt). The discard thresholds are set at approx-imately 35, 75, and 90 percent of the scaled queuelimit for traffic at discard priority 3 (DP=3), DP=2,and DP=1 respectively. However, a reduction willnever result in a value that is less than the value ofthe minPerVcQueueLimit attribute. The per- VCqueue limit may be overridden for a provisionedconnection by specifying a value in the Vcd Tm orVpd Tm txQueueLimit attribute. For1pOC12SmLrAtm and 1pOC48ChSmIrAtm cards,per-VC queues are not available for the UBR ser-vice category. For 1pOC48ChSmIrAtm cards, thisattribute is used to set the maximum size of the link-class queue for buffering the egress traffic of theUBR service category. This is similar to commonqueuing, except that each UBR connection main-tains a per-VC utilization limit of the common queuespecified for a provisioned connection by the VcdTm or Vpd Tm txQueueLimit attribute. A value ofautoConfigure means an appropriate value is selec-ted based on the card type. For 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Chand 4pDS3ChAtm cards, the value is 1792. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm, and3pDS3Atm cards, the value is 2304. For3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,4pOC3MmAtm, 4pOC3SmIrAtm, 16pOC3SmIrAtm,16pOC3PosAtm, 4pOC12SmIrAtm, and4pOC12SmLrAtm cards, the value is 10240. ForMSA32 cards, the value is 10240 for OC-3 chan-nels, and 1792 for DS1, or E1 channels. For4pMRPosAtm cards, the value is 40960. For1pOC12SmLrAtm cards, the value is 4096. For1pOC48ChSmIrAtm cards, the value is 30720. Theoperational value of the maximum length of a queue(common or per-VC) is indicated by the Vcc Tm,Vpc Tm, or Vpt Tm txQueueThresholds attribute.For standard VPTs, this attribute only applies whenusing common queuing. When using per-VCqueuing, regardless of the Vpt's service category,standard VPTs use the AtmIf CA NrtVbrtxQueueLimit attribute value as their default. Thisattribute does not apply to basic VPTs. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,

303


8pDS1Atm, and 2pJ6MAtm cards, this attributemust be set to the same value for CA NrtVbr, Abrand Ubr components and the valid range is from 5to 30000 inclusive. For 2pOC3MmAtm2,2pOC3SmAtm2, 2pSTM1eAtm, 2pSTM1eCh,2pSTM1Ch, 2pOC3Ch, 4pOC3Ch, 4pOC3MmAtm,4pOC3SmIrAtm, 4pDS3ChAtm, 3pDS3Atm2,3pE3Atm2, 12pDS3Atm, 12pE3Atm, MSA32,1pOC12SmLrAtm, and 1pOC48ChSmIrAtm cards,the valid range for this attribute is from 5 to 63488inclusive. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,and 16pOC3SmIrAtm cards, the valid range for thisattribute is from 5 to 512000 inclusive. For16pOC3PosAtm cards, the valid range for this at-tribute is from 32 to 261120 inclusive. For4pMRPosAtm cards, the valid range for this attrib-ute is from 32 to 1011840 inclusive.

Class NA

Presence required

Visibility customer






Domain

Description This attribute specifies the default queuing optionfor unshaped connections of the UBR service cat-egory. This attribute controls whether common orper-VC queuing is used. A value of perVc meansthat each connection has its own buffering andqueue limits. A value of common means that cellsare queued in First In First Out order on a commonqueue for this service category. The commonqueue has one set of congestion control levels forall cells enqueued on it. This attribute does not ap-ply to basic VPTs, or standard Vpt VCCs. For3pOC3MmAtm, 3pOC3SmAtm, 3pE3Atm,3pDS3Atm, 3pE1Atm, 3pDS1Atm, 8pE1Atm,8pDS1Atm, and 2pJ6MAtm cards, if the perVc-QueueInterfaces attribute of the Lp Eng Arc Cqc Ovcomponent permits shaping for this interface, thenthis attribute may take any of the three values. Inthis case, the value autoConfigure is interpreted tomean per-VC queuing. If the perVcQueueInterfaces

304


attribute of the Lp Eng Arc Cqc Ov component doesnot permit shaping for this interface, then this attrib-ute may take the values common, or autoConfigure.In this case, the value autoConfigure is interpretedto mean common queuing. An override to this de-fault may be specified for a provisioned connectionunder the Vcd Tm, or Vpd Tm component. There isone common queue which is shared by the nrt-VBR, ABR, and UBR service categories. For1pOC12SmLrAtm and 1pOC48ChSmIrAtm cards,the value perVc is not supported since these cardsdo not support per-VC queuing. The value autoCon-figure is interpreted to mean common queuing. For4pOC12SmIrAtm, 4pOC12SmLrAtm, and16pOC3SmIrAtm cards, the value common is notsupported since these cards do not support com-mon queuing. The value autoConfigure is inter-preted to mean per-VC queuing. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,MSA32, 16pOC3PosAtm, and 4pMRPosAtm cards,if traffic shaping for this service category is dis-abled, this attribute may take any of the three val-ues. In this case, the value autoConfigure is inter-preted to mean per-VC queuing. If traffic shapingfor this service category is not disabled, the onlypermitted values are perVc and autoConfigure. Inthis case, the value autoConfigure is interpreted tomean per-VC queuing. For 16pOC3PosAtm and4pMRPosAtm cards, no more than 32,000 connec-tions on the FP can use per-VC queuing. The re-maining connections must use common queuing.The Lp Eng Arc perVcQueueUsage attribute indic-ates the number per-VC queues that are currentlyin use. The value of the operational opUn-shapedTransmitQueueing attribute of this compon-ent indicates whether the transmit queuing is perVcor common.

Class NA

Presence required

Visibility customer




305




Domain

Description This attribute specifies the default usage parametercontrol (UPC) option for connections of the UBRservice category. This attribute is ignored if the rx-TrafficDescriptorType indicates 1 or 2. An overrideto this default may be specified for a provisionedconnection under the Vcd Tm or Vpd Tm compon-ent. A value of enforced means UPC is enforced foreach connection. When UPC is enforced, non-conforming cells are either tagged or discarded de-pending on the rxTrafficDescriptorType. A value ofmonitored means UPC conformance checking isperformed, except, instead of the non-conformingcells being tagged or discarded, they are merelycounted in the UPC violations counts and passedon unchanged. A value of disabled means UPC isdisabled on the receive path for all UBR connec-tions. This attribute does not apply to basic VPTs,or standard Vpt VCCs. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, and 2pJ6MAtmcards, the value monitored is not supported. Thisvalue has the same effect as disabled. For1pOC48ChSmIrAtm cards, the value of this attrib-ute must be disabled.

Class NA

Presence required

Visibility customer




weightPolicy


Domain

Description This attribute specifies the policy which is appliedwhen calculating the fairness weight for unshapedconnections of the UBR service category. The fair-ness weight for a connection determines the relat-ive amount of bandwidth which that connection ob-tains, compared to other connections in the sameservice category. Connections with equal weight getequal transmit opportunities. Connections with high-

306


er weights get more transmit opportunities com-pared with connections that have lower weights. Anoverride to this default may be specified for a provi-sioned connection under the Vcd Tm or Vpd Tmcomponent. The fairness weight for a connection isdirectly proportional to the value of one of the trafficdescriptor parameters for that connection. This at-tribute specifies which traffic descriptor parameter isused for connections of the UBR service category.A value of mcr means the fairness weight is propor-tional to the default minimum cell rate (MCR) forUBR connections. If the default minimum cell rate is0, all UBR connections get a minimum weight,which is 1. A value of pcr means the fairness weightis proportional to the transmit peak cell rate (PCR)of a connection. Connections with a higher PCRhave a higher fairness weight. Connections with tx-TrafficDescType 1 or 2 get a minimum weight,which is 1. A value of ecr means the fairness weightis proportional to the equivalent cell rate (ECR) of aconnection as calculated by connection admissioncontrol (CAC). Connections with a higher ECR havea higher fairness weight. Connections with an ECRof 0 get a minimum weight, which is 1. The weightof a connection is visible in the Vcc Tm, Vpc Tm, orVpt Tm weight attribute. This attribute does not ap-ply to basic VPTs and standard Vpt VCCs. This at-tribute is ignored if the value of the unshapedTrans-mitQueueing attribute is common. This attribute isnot applicable and is ignored for 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,1pOC12SmLrAtm, and 1pOC48ChSmIrAtm cards.

Class NA

Presence required

Visibility customer

Range mcr, pcr, ecr


Initial value ecr

307


58 AtmVirtualChannelConnection (Vcc)






Parents:

EM - AtmIf - Vcc

Child(ren):

Dst - Loop - Nep - Nrp - Src - Test - Vcd -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n VirtualChannelConnection/vpi.vci This com-ponent represents a virtual channel connection(VCC). For Vccs directly beneath the AtmIf, the in-stance value defines the VPI and VCI values for thisconnectionfor example, Vcc/16.32 would define aconnection with a VPI of 16 and a VCI of 32. TheVPI can be in the range of 0 to 4095 and the VCIcan be in the range of 0 to 65535. Note that a Vccinstance of 0.0 is invalid as defined in the ATM For-um.

308


Class NA

Presence required

Visibility customer

Unit

Range [3..10]


Initial Value

309


59 AtmVirtualChannelDescriptor (Vcd)





Parents:

EM - AtmIf - Vpt - Vcc - Vcd

EM - AtmIf - Vcc - Vcd

Child(ren):

Tm -

Identifiers:

-

Links:


Parameters:

correlationTag

Parameter name correlationTag

Domain

Description This attribute specifies a unique identifier for eachend of a PVC. It that may be used by downstreamprocessing systems to correlate accounting recordsissued at different nodes in the network. The attrib-ute can be up to 64 bytes long. If it is less than 64bytes, it is zero filled on the right to create a 64 bytevalue. The resulting value is recorded in the attrib-ute callConnId for this PVC's ATM accounting re-cords. If the value is a null string then this PVCdoes not have any accounting records generatedfor it.

Class NA

310


Presence required

Visibility customer

Range [0..64]


Initial value

endToEndLoopback


Domain

Description This attribute specifies whether end-to-end loop-back insertion should be performed on this connec-tion. A value of sameAsInterface means the end-to-end loopback insertion for the connection isbased on the endToEndLoopback attribute of theconnection's parent AtmIf componentif the ATM in-terface has end-to-end loopback insertion turnedon, then end-to- end loopback insertion is also onfor the connection. A value of on, or off means end-to-end loopback insertion is turned on or off re-spectively for the connection regardless of the pro-visioning of the parent AtmIf component. Note thatend-to-end loopback insertion is not possible if thevalue of the connectionPointType attribute of theVcc or Vpc component is connectingPoint, or seg-mentEndPoint. End-to-end loopback insertion isalso not possible if the value of the distributionTypeattribute of the Vcc is pointToMultipoint. In suchcases, the operational endToEndLoopbackState at-tribute indicates notApplicable and end-to-end loop-back insertion is not performed. End-to-end loop-back insertion is always possible on a Vpt.

Class NA

Presence required

Visibility customer

Range on, off, sameAsInterface



mCastConnectionType

Parameter name mCastConnectionType

Domain

311


Description This attribute specifies if this Vcc or Vpc is part ofpoint-to-point or point-to-multiPoint connection. Avalue of pointToMultiPointRoot must be set whenthis Vcc has an Msrc or an Mnrp subcomponent, orthis Vpc has an Mnrp subcomponent. A value ofpointToMultiPointLeaf must be set when this Vcc orVpc has a Nrp subcomponent and its nextHop at-tribute is linked to a Mnrp component. Otherwise avalue of pointToPoint must be set.

Class NA

Presence required

Visibility customer

Range pointToPoint, pointToMultipointRoot, pointToMulti-pointLeaf


Initial value pointToPoint

segLinkSideLoopback


Domain

Description This attribute specifies whether link-side segmentloopback insertion should be performed on this con-nection. A value of sameAsInterface means thelink-side segment loopback insertion for the con-nection is based on the segLinkSideLoopback at-tribute of the connection's parent AtmIf componentifthe ATM interface has link-side segment loopbackinsertion turned on, then link-side segment loop-back insertion is also on for the connection. A valueof on, or off means link-side segment loopback in-sertion is turned on or off respectively for the con-nection regardless of the provisioning of the parentAtmIf component. Note that link-side segment loop-back insertion is not possible if the value of the con-nectionPointType attribute of the Vcc or Vpc com-ponent is connectingPoint. Link-side segment loop-back insertion is also not possible if the value of thedistributionType attribute of the Vcc is pointToMulti-point. In such cases, the operational segLinkSide-LoopbackState attribute indicates notApplicable andlink-side segment loopback insertion is not per-formed. Link-side segment loopback insertion is al-ways possible on a Vpt.

Class NA

Presence required

312


Visibility customer






Domain

Description This attribute specifies whether switch-side seg-ment loopback insertion should be performed onthis connection. A value of sameAsInterface meansthe switch-side segment loopback insertion for theconnection is based on the segSwitchSideLoop-back attribute of the connection's parent AtmIf com-ponentif the ATM interface has switch-side segmentloopback insertion turned on, then switch-side seg-ment loopback insertion is also on for the connec-tion. A value of on, or off means switch-side seg-ment loopback insertion is turned on or off respect-ively for the connection regardless of the provision-ing of the parent AtmIf component. Note thatswitch-side segment loopback insertion is not pos-sible if the value of the connectionPointType attrib-ute of the Vcc or Vpc component is connectingPointor connectionEndPoint. Switch- side segment loop-back insertion is also not possible if the value of thedistributionType attribute of the Vcc is pointToMulti-point In such cases, the operational segSwitchSide-LoopbackState attribute indicates notApplicable andswitch-side segment loopback insertion is not per-formed. Switch-side segment loopback is neverpossible on a Vpt.

Class NA

Presence required

Visibility customer




313


60 AtmVirtualPathConnection (Vpc)






Parents:

EM - AtmIf - Vpc

Child(ren):

Loop - Nrp - Vpd -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n VirtualPathConnection/vpi This componentrepresents a virtual path connection (VPC). The in-stance value defines the VPI value for this connec-tionfor example, Vpc/120 defines a path with a VPIof 120. A VPC is always a relay point. and as suchcan only have a either a NRP or a Loop subcom-ponent.

Class NA

Presence required

314


Visibility customer

Unit

Range [0..4095]

Data Type Decimal

Initial Value

315


61 AtmVirtualPathDescriptor (Vpd)





Parents:

EM - AtmIf - Vpc - Vpd

Child(ren):

Tm -

Identifiers:

-

Links:


Parameters:

correlationTag


Domain


Class NA

Presence required

316


Visibility customer

Range [0..64]


Initial value

endToEndLoopback


Domain


Class NA

Presence required

Visibility customer




mCastConnectionType


Domain

Description This attribute specifies if this Vcc or Vpc is part ofpoint-to-point or point-to-multiPoint connection. A

317


value of pointToMultiPointRoot must be set whenthis Vcc has an Msrc or an Mnrp subcomponent, orthis Vpc has an Mnrp subcomponent. A value ofpointToMultiPointLeaf must be set when this Vcc orVpc has a Nrp subcomponent and its nextHop at-tribute is linked to a Mnrp component. Otherwise avalue of pointToPoint must be set.

Class NA

Presence required

Visibility customer




segLinkSideLoopback


Domain


Class NA

Presence required

Visibility customer

318







Domain


Class NA

Presence required

Visibility customer




319


62 AtmVirtualPathTerminator (Vpt)






Parents:

EM - AtmIf - Vpt

Child(ren):

CA - Vcc - Vpd -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n VirtualPathTerminator/vpi This componentrepresents a virtual path terminator (VPT). The in-stance value defines the VPI value for this connec-tionfor example, Vpt/120 defines a terminator with aVPI of 120.

Class NA

Presence required

Visibility customer

320


Unit

Range [0..4095]

Data Type Decimal

Initial Value

321


63 AtmVptCa (CA)






Parents:

EM - AtmIf - Vpt - CA

Child(ren):

Cbr - NrtVbr - RtVbr - Ubr -

Identifiers:

-

Links:


Parameters:

bandwidthPool

Parameter name bandwidthPool

Domain

Description Total Vpt bandwidth capacity is partitioned into fivebandwidth pools. This attribute specifies the per-centage of Vpt bandwidth that is allowed for eachpool. The percentage for each pool ranges from 0%to 12,800%. This allows for both under and oversubscription of the Vpt bandwidth. Under subscrip-tion occurs when the sum of the percentages as-signed to the five pools is less than 100%. Oversubscription occurs when the sum of the percent-ages for the five pools exceeds 100%.

Class NA

Presence required

322


Visibility customer

Range [0..12800]



maxVccs


Domain

Description This attribute specifies the maximum number ofVCCs that can be associated with this Vpt compon-ent. The value must not exceed the maxVccs attrib-ute of the Atmif CA. A value of autoConfiguremeans an appropriate value is selected based onthe card type. For 2pSTM1eCh, 2pSTM1Ch,2pOC3Ch, 4pOC3Ch and MSA32 cards, the valueis 100. For 4pOC12SmIrAtm, 4pOC12SmLrAtm,16pOC3SmIrAtm, 16pOC3PosAtm, and4pMRPosAtm cards, the value is 127. For all othercards, the value is 255.

Class NA

Presence required

Visibility customer




permittedAtmServiceCategories

Parameter name permittedAtmServiceCategories

Domain

Description This attribute specifies which ATM service categor-ies are permitted on this Vpt for SVCs. The value ofthis attribute does not affect control VCCs, such assignaling and ILMI channels. If the value is empty,no SVCs are permitted to use this Vpt.

Class NA

Presence required

Visibility customer


Data type Set of

323


Initial value unspecified-BitRate,constantBitRate,rtVariableBitRate,nrtVariableBitRate

324


64 AtmVptConstantBitRate (Cbr)





• Verbs: add,

Parents:

EM - AtmIf - Vpt - CA - Cbr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n Vpt/n CA ConstantBitRate/n This compon-ent controls default characteristics of the constantbit rate (CBR) service category, for VCCs admin-istered by this CA. Any attributes of the AtmIf CACbr that cannot be overridden in the Vpt CA Cbr af-fect all connections, including Vpt VCCs.

Class NA

Presence required

Visibility customer

325


Unit

Range [0..0]

Data Type Decimal

Initial Value

cdv

Parameter name cdv

Domain

Description This attribute specifies the peak-to-peak cell delayvariation (CDV) which is contributed to all CBR con-nections associated with this Vpt. The CDV is ameasure of the delay jitter introduced mostly bytraffic buffering and cell scheduling. This attribute isused by PNNI in the Resource Availability Informa-tion Group (RAIG) topology updates and route se-lection. It is also used by CAC at connection set-uptime to determine whether this Vpt can meet theCDV requirement for that connection. If so, thevalue of this attribute is added to the cumulativeCDV field of the extended QoS information element.

Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Decimal

Initial value 250

cdvt

Parameter name cdvt

Domain

Description This attribute specifies the default cell delay vari-ation tolerance (CDVT) for connections of the CBRservice category. An override to this default may bespecified for a provisioned connection under theVcd Tm or Vpd Tm component. This attribute isused by the Connection Admission Control (CAC)algorithm to compute the equivalent cell rate (ECR)required by a given CBR connection. The larger thevalue of CDVT, the larger is its ECR. If Usage Para-meter Control (UPC) is enabled for a connection,CDVT is used by the UPC function to decide wheth-er a cell is conforming or non-conforming based on

326


the connection's traffic descriptor type. The largerthe CDVT value, the more tolerant is the UPC ofbandwidth usage beyond the traffic contract.

Class NA

Presence required

Visibility customer

Range [1..10000]

Data type Decimal

Initial value 250

cellLossRatio


Domain

Description This attribute specifies the tolerable cell loss ratio(CLR) for CBR traffic. The value specified is thenegative base 10 logarithm of the CLR. For ex-ample, if the target CLR = 1E-10 then the value ofthe cellLossRatio attribute is 10. The value of thisattribute must be the same as the value of theRtVbr cellLossRatio attribute since CBR and rt-VBRtraffic have the same discard priority. This attributeis used by the Connection Admission Control (CAC)algorithm to compute the equivalent cell rate (ECR)required for CBR connections. There is a trade-offbetween the service category CLR and the achiev-able Vpt bandwidth utilization. To guarantee an ex-cellent service category, the CLR should be assmall as possible (for example, 1E-10). However, asmaller CLR results in a larger equivalent cell ratefor a given connection and hence a lower Vpt band-width utilization. A value of anyClrValue means thatno bandwidth is reserved for CBR connections, andCAC is effectively turned off. All CBR connectionsare admitted.

Class NA

Presence required

Visibility customer



Initial value 10

maxCtd

327



Domain

Description This attribute specifies the maximum cell transferdelay (MaxCTD) which is applied to all CBR con-nections associated with this Vpt. MaxCTD is thesum of the fixed delay and the CDV. The compon-ents of the fixed delay include propagation delaythrough the physical media, delays induced by thetransmission system and fixed components ofswitch processing delay. This attribute is used byPNNI in the Resource Availability Information Group(RAIG) topology updates and route selection. It isalso used by CAC at connection set-up time to de-termine whether this Vpt can meet the ATM con-nection's MaxCTD requirement.

Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Decimal

Initial value 1000

pool

Parameter name pool

Domain

Description This attribute specifies the bandwidth pool which isto be used to support the constant bit rate (CBR)service category. The percentage of Vpt bandwidthcapacity reserved for the given bandwidth pool isthe maximum bandwidth that can be allocated toCBR traffic. The percentage allocated to eachbandwidth pool can be provisioned through thebandwidthPool attribute of the Vpt CA component.

Class NA

Presence required

Visibility customer



Initial value pool1

328


65 AtmVptNonRealTimeVariableBitRate (NrtVbr)





• Verbs: add,

Parents:

EM - AtmIf - Vpt - CA - NrtVbr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n Vpt/n CA NonRealTimeVariableBitRate/nThis component controls default characteristics ofthe non-real-time variable bit rate (nrt-VBR) servicecategory, for VCCs administered by this CA. Any at-tributes of the AtmIf CA NrtVbr that cannot be over-ridden in the Vpt CA NrtVbr affect all connections,including Vpt VCCs.

Class NA

Presence required

329


Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

cellLossRatio


Domain

Description This attribute specifies the tolerable cell loss ratio(CLR) for nrt- VBR traffic. The value specified is thenegative base 10 logarithm of the CLR. For ex-ample, if the target CLR = 1E-10 then the value ofthe cellLossRatio attribute is 10. The value of thisattribute must be less than or equal to the value ofthe RtVbr cellLossRatio attribute since rt-VBR traffichas a higher discard priority. This attribute is usedby the Connection Admission Control (CAC) al-gorithm to compute the equivalent cell rate (ECR)required for nrt-VBR connections. There is a trade-off between the service category CLR and theachievable Vpt bandwidth utilization. To guaranteean excellent service category, the CLR should beas small as possible (for example, 1E-10).However, a smaller CLR results in a larger equival-ent cell rate for a given connection and hence alower Vpt bandwidth utilization. A value of anyClr-Value means that no bandwidth is reserved for nrt-VBR connections and CAC is effectively turned off.All nrt- VBR connections are admitted.

Class NA

Presence required

Visibility customer



Initial value 7

pool

Parameter name pool

Domain

Description This attribute specifies the bandwidth pool which is

330


to be used to support the non-real time variable bitrate (nrt-VBR) service category. The percentage ofVpt bandwidth capacity reserved for the givenbandwidth pool is the maximum bandwidth that canbe allocated to nrt-VBR traffic. The percentage al-located to each bandwidth pool can be provisionedthrough the bandwidthPool attribute of the Vpt CAcomponent.

Class NA

Presence required

Visibility customer



Initial value pool1

331


66 AtmVptRealTimeVariableBitRate (RtVbr)





• Verbs: add,

Parents:

EM - AtmIf - Vpt - CA - RtVbr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n Vpt/n CA RealTimeVariableBitRate/n Thiscomponent controls default characteristics of thereal-time variable bit rate (rt-VBR) service category,for VCCs administered by this CA. Any attributes ofthe AtmIf CA RtVbr that cannot be overridden in theVpt CA RtVbr affect all connections, including VptVCCs.

Class NA

Presence required

332


Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

cdv

Parameter name cdv

Domain

Description This attribute specifies the peak-to-peak cell delayvariation (CDV) which is contributed to all rt-VBRconnections associated with this Vpt. The CDV is ameasure of the delay jitter introduced mostly bytraffic buffering and cell scheduling. This attribute isused by PNNI in the Resource Availability Informa-tion Group (RAIG) topology updates and route se-lection. It is also used by CAC at connection set-uptime to determine whether this Vpt can meet theCDV requirement for that connection. If so, thevalue of this attribute is added to the cumulativeCDV field of the extended QoS information element.

Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Decimal

Initial value 1268

cellLossRatio


Domain

Description This attribute specifies the tolerable cell loss ratio(CLR) for rt- VBR traffic. The value specified is thenegative base 10 logarithm of the CLR. For ex-ample, if the target CLR = 1E-10 then the value ofthe cellLossRatio attribute is 10. The value of thisattribute must be the same as the value of the CbrcellLossRatio attribute since CBR and rt-VBR traffichave the same discard priority. The value of this at-tribute must also be greater than or equal to thevalue of the NrtVbr cellLossRatio attribute since rt-

333


VBR traffic has a higher discard priority. This attrib-ute is used by the Connection Admission Control(CAC) algorithm to compute the equivalent cell rate(ECR) required for rt- VBR connections. There is atrade-off between the service category CLR and theachievable Vpt bandwidth utilization. To guaranteean excellent service category, the CLR should beas small as possible (for example, 1E-10).However, a smaller CLR results in a larger equival-ent cell rate for a given connection and hence alower Vpt bandwidth utilization. A value of anyClr-Value means that no bandwidth is reserved for rt-VBR connections and CAC is effectively turned off.All rt-VBR connections are admitted.

Class NA

Presence required

Visibility customer



Initial value 10

maxCtd


Domain

Description This attribute specifies the maximum cell transferdelay (MaxCTD) which is applied to all rt-VBR con-nections associated with this Vpt. MaxCTD is thesum of the fixed delay and the CDV. The compon-ents of the fixed delay include propagation delaythrough the physical media, delays induced by thetransmission system and fixed components ofswitch processing delay. This attribute is used byPNNI in the Resource Availability Information Group(RAIG) topology updates and route selection. It isalso used by CAC at connection set-up time to de-termine whether this Vpt can meet the ATM con-nection's MaxCTD requirement.

Class NA

Presence required

Visibility customer

Range [0..16777215]

Data type Decimal

Initial value 2000

334


pool

Parameter name pool

Domain

Description This attribute specifies the bandwidth pool which isto be used to support the real-time variable bit rate(rt-VBR) service category. The percentage of Vptbandwidth capacity reserved for the given band-width pool is the maximum bandwidth that can beallocated to rt-VBR traffic. The percentage allocatedto each bandwidth pool can be provisioned throughthe bandwidthPool attribute of the Vpt CA compon-ent.

Class NA

Presence required

Visibility customer



Initial value pool1

335


67 AtmVptUnspecifiedBitRate (Ubr)





• Verbs: add,

Parents:

EM - AtmIf - Vpt - CA - Ubr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n Vpt/n CA UnspecifiedBitRate/n This com-ponent controls default characteristics of the unspe-cified bit rate (UBR) service category, for VCCs ad-ministered by this CA. Any attributes of the AtmIfCA Ubr that cannot be overridden in the Vpt CA Ubraffect all connections, including Vpt VCCs.

Class NA

Presence required

Visibility customer

336


Unit

Range [0..0]

Data Type Decimal

Initial Value

maxVccs


Domain

Description This attribute specifies the maximum number ofUBR VCCs that can be associated with this Vpt.The value of this attribute must not exceed themaxVccs attribute of the parent Vpt CA component.A value of sameAsCa means the maximum numberof UBR VCCs is defined by the maxVccs attribute ofthe Vpt CA. Changes to this attribute are not criticalto the Vpt, and do not affect existing VCCs. If thevalue is changed to a number smaller than the cur-rent number of active UBR VCCs, no new UBRVCCs are admitted until the number of active UBRVCCs drops below the value of this attribute. Thecurrent number of active UBR VCCs is indicated bythe vccUsage operational attribute of the Vpt CAUbr component.

Class NA

Presence required

Visibility customer




minimumCellRate

Parameter name minimumCellRate

Domain

Description This attribute specifies the default minimum cell rate(MCR) which is allocated from the UBR bandwidthpool for each UBR connection which is admitted us-ing Connection Admission Control (CAC). UBR con-nections normally are serviced on a best effortbasis, but this attribute allows allocation of a defaultminimum bandwidth for each connection.

Class NA

337


Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value 0

pool

Parameter name pool

Domain

Description This attribute specifies the bandwidth pool which isto be used to support the unspecified bit rate (UBR)service category. The percentage of Vpt bandwidthcapacity reserved for the given bandwidth pool isthe maximum bandwidth that can be allocated toUBR traffic. The percentage allocated to eachbandwidth pool can be provisioned through thebandwidthPool attribute of the Vpt CA component.

Class NA

Presence required

Visibility customer



Initial value pool1

338


68 AtmVptVcc (Vcc)






Parents:

EM - AtmIf - Vpt - Vcc

Child(ren):

Dst - Loop - Nep - Nrp - Src - Test - Vcd -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n Vpt/vpi VirtualChannelConnection/vci Thiscomponent represents a virtual channel connectionterminated by a Virtual Path Terminator (VPT). ForVccs beneath Vpts, the instance value defines theVCI value for this connectionfor example, Vpt/16Vcc/32 would define a connection with a VPI of 16,and a VCI of 32. The VPI value of the Vcc is inher-ited from the parent Vpt. The VPI can be in therange of 0 to 4095 and the VCI can be in the rangeof 0 to 65535. Note that a Vcc instance of 0.0 is in-

339


valid as defined in the ATM Forum. Thus, the com-bination of Vpt/0 Vcc/0 is also invalid.

Class NA

Presence required

Visibility customer

Unit

Range [0..65535]

Data Type Decimal

Initial Value

340


69 AtmVptVpd (Vpd)





Parents:

EM - AtmIf - Vpt - Vpd

Child(ren):

Tm -

Identifiers:

-

Links:


Parameters:

correlationTag


Domain


Class NA

Presence required

341


Visibility customer

Range [0..64]


Initial value

endToEndLoopback


Domain


Class NA

Presence required

Visibility customer




mCastConnectionType


Domain

Description This attribute specifies if this Vcc or Vpc is part ofpoint-to-point or point-to-multiPoint connection. A

342


value of pointToMultiPointRoot must be set whenthis Vcc has an Msrc or an Mnrp subcomponent, orthis Vpc has an Mnrp subcomponent. A value ofpointToMultiPointLeaf must be set when this Vcc orVpc has a Nrp subcomponent and its nextHop at-tribute is linked to a Mnrp component. Otherwise avalue of pointToPoint must be set.

Class NA

Presence required

Visibility customer




segLinkSideLoopback


Domain


Class NA

Presence required

Visibility customer

343







Domain


Class NA

Presence required

Visibility customer




vptType

Parameter name vptType

Domain

Description This attribute specifies the type of the Vpt. A value

344


of basic configures one level of traffic management(TM) for the VPT, at the VC level. VCs within theVP are treated like independent VCC connections,and thus, are scheduled the same as other VCs un-der the AtmIf, with no scheduling done for the VP it-self. A value of standard configures two levels oftraffic management (TM) for the VPT, one level forVP TM and one level for VC TM. VCs within the VPuse weighted fair queuing to schedule the VCs with-in the VPT, with VCs differentiated as either real-time (CBR, rt-VBR) or non-real-time (nrt-VBR, UBR)connections. The VP itself has a full range of emis-sion scheduling and service category differentiationavailable between itself and the other connectionsunder the AtmIf. For 3pOC3MmAtm,3pOC3SmAtm, 3pE3Atm, 3pDS3Atm, 3pE1Atm,3pDS1Atm, 8pE1Atm, 8pDS1Atm, 2pJ6MAtm,1pOC12SmLrAtm, 4pOC12SmIrAtm,4pOC12SmLrAtm, 16pOC3SmIrAtm,16pOC3PosAtm, 1pOC48ChSmIrAtm, and4pMRPosAtm cards, all Vpts must be basic. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,2pSTM1eCh, 2pSTM1Ch, 2pOC3Ch, 4pOC3Ch,4pOC3MmAtm, 4pOC3SmIrAtm, 4pDS3ChAtm,3pDS3Atm2, 3pE3Atm2, 12pDS3Atm, 12pE3Atm,and MSA32 cards, Vpts may be of any type.

Class NA

Presence required

Visibility customer

Range basic, standard


Initial value basic

345


70 BwPool (BwPool)






Parents:

EM - IpIf - BwPool

EM - Aal2If - BwPool

Child(ren):

IpFlow - Path -

Identifiers:


MaxIn-stances


Links:


transportMap RncIn Tm

congestionManagement RncIn Cm

Parameters:

rdnId


Domain

Description Aal2If/n BwPool/n Ipif/n BwPool/n This componentis used to provision bandwidth for either Aal2If ofIpIf components. BwPool can only be provisionedfor the Iub interface. The bandwidth reserved for aBwPool follows the specified CongestionManage-

346


ment.

Class NA

Presence required

Visibility customer

Unit

Range [1..16]

Data Type Decimal

Initial Value

congestionManagement

Parameter name congestionManagement

Domain

Description This attribute specifies a link reference to a valid in-stance of RncIn CongestionManagement compon-ent.

Class NA

Presence required

Visibility customer

Range RncIn Cm


Initial value N.A.

mobileCountryCode

Parameter name mobileCountryCode

Domain

Description This attribute specifies Public Land Mobile NetworkMobile Country Code. A value of 0 indicates thatthis instance of BwPool is shared by all the operat-ors using the RNC equipment.

Class NA

Presence required

Visibility customer

Range [0..999]

Data type Decimal

Initial value 0

347


mobileNetworkCode

Parameter name mobileNetworkCode

Domain

Description This specifies the PLMNID Mobile Network Codevalue.

Class NA

Presence required

Visibility customer

Range [0..999]

Data type Decimal

Initial value 0

qos0BwReservation


Domain

Description This attribute specifies the percentage reservationof the sum of bandwidth of all transport Aal2If Bw-Pool Path or IpIf BwPool IpFlow which share thisparticular quality of service (qos = 0). A value of 0indicates no reservation (full sharing with otherquality of service categories) while a value of 100indicates full reservation (no sharing of bandwidthwith other quality of service categories).

Class NA

Presence required

Visibility customer

Range [0..100]

Data type Decimal

Initial value 0

qos1BwReservation


Domain

Description This attribute specifies the percentage reservationof the sum of bandwidth of all transport Aal2If Bw-Pool Path or IpIf BwPool IpFlow which share thisparticular quality of service (qos = 1). A value of 1indicates no reservation (full sharing with otherquality of service categories) while a value of 100indicates full reservation (no sharing of bandwidth

348


with other quality of service categories).

Class NA

Presence required

Visibility customer

Range [0..100]

Data type Decimal

Initial value 0

qos2BwReservation


Domain


Class NA

Presence required

Visibility customer

Range [0..100]

Data type Decimal

Initial value 0

qos3BwReservation


Domain


Class NA

Presence required

349


Visibility customer

Range [0..100]

Data type Decimal

Initial value 0

transportMap

Parameter name transportMap

Domain

Description This attribute specifies a link reference to a valid in-stance of RncIn TransportMap. TransportMap is atable used to map User plane allocation parametersto required transport service parameters. Transportservice parameters are used for Call AdmissionControl.

Class NA

Presence required

Visibility customer

Range RncIn Tm


Initial value N.A.

350


71 Card (Card)






Parents:

EM - Shelf - Card

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Shelf Card/n The Card component is a subcompon-ent of the Shelf component. There are a maximumof 16 Card components defined, one correspondingto each physical card slot. This is necessary in or-der to be able to reflect which processor card ispresent in each slot at any time. For a shelf thatdoes not contain 16 slots, the Card componentsonly need to be defined for each of their physicalcard slots. This can be accomplished via the Star-tUp initial provisioning system. It is possible to add

351


a Card component since it may be desirable tomove a CP to a shelf that contains more physicalcard slots. This CP move would result in adding theprovisioning information associated with the otherprocessor cards instead of starting over. It is notpossible to delete a Card component, but its typecan be changed to "None".

Class NA

Presence required

Visibility customer

Unit

Range [0..15]

Data Type Decimal

Initial Value

cardType

Parameter name cardType

Domain

Description This is the type of card expected in this slot. Spe-cifying a card type here has the effect of configuringa card to run in this slot. A value of none meansthat no card is configured to run in this slot.

Class NA

Presence required

Visibility customer

Range CP, V11, V35, DS1, DS1V, DS3, E1, E1V, E3,none, 1pFddiMultiMode, 4pTokenRing,6pEth10BaseT, DS1C, E1C, 3pE3Atm, 3pDS3Atm,3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm,3pDS1Atm, J2MV, 4pEthAui, 1pFddiSingleMode,1pDS1V, 1pE1V, 2pJ6MAtm, HSSI, 8pDS1, CFP1,DEV1, CFP2, DEV2, 4pDS1Aal1, 4pE1Aal1,1pDS3C, IlsForwarder, 8pDS1Atm, 8pE1Atm,1pE1Mvp, 1pDS1Mvp, 1pTTC2mMvp, 1pDS3cAal,2pDS3cAal, 12mVspAal, 2pEth100BaseT,2pOC3MmAtm2, 2pOC3SmAtm2, 3pDS3Atm2,3pE3Atm2, CPeD, CPeE, 4pOC3SmIrAtm,4pOC3MmAtm, 12pDS3Atm, 12pE3Atm,1pOC12SmLrAtm, 1pE1Mvpe, 1pDS1Mvpe,1pTTC2mMvpe, 32pDS1Msa, 32pDS1MsaMt,32pDS1MsaMtp, 32pDS1MsaSt, 32pDS1MsaStp,32pE1Aal, 1pOC48SmSrAtm, 4pDS3Ch,4pDS3ChAtm, 1pSTM1ChSmIr,1pSTM1ChSmIrAtm, 4pOC12SmIrAtm,

352


4pOC12SmLrAtm, 12mPcusp, 32pE1Msa,32pE1MsaMt, 32pE1MsaMtp, 32pE1MsaSt,32pE1MsaStp, 1pOC48ChSmIrAtm,16pOC3SmIrAtm, 1pOC48SmIrAtm, 4pDS3ChAal1,Vsp2, VpnAccelerator, 24pBCNW, 6mPktServSP,2pGPDsk, WPDS, 11pMSW, 1pOC48SmSrPos,1pOC48SmIrPos, 2mPktServSP, 1pOC48Pos,4pOC12Pos, 16pOC3PosAtm, 4pDS1Mvpe,4pE1Mvpe, 4pOC3ChSmIr, 1pOC12SmSrPos,1pOC12SmIrPos, 4pOC3SmSrPos,4pOC3SmIrPos, 2pSTM1eAtm, VpnXc,2pGeMmSrVsp3, 4pGe, 2pSTM1eCh,2pOC3ChSmIrVsp3, Vsp2W, 34pGeLxTdmVsp,3pGeLxOC3SmIrVsp, 6mAppServ, 2pVS,2pOC3ChSmIrVsp4, 8pEth100BaseT,4pMRPosAtm, 4pEth100BaseT, PcuspE2,2pSTM1Ch, 8pDS1Msa, 8pE1Msa,4pOC3ChSmIrVsp4e, PktServSP2, AppServ2,2pOC3ChSmIrVsp4e, 2pOC3Ch, 4pOC3Ch, CPF


Initial value none

commentText


Domain

Description This is an arbitrary string that can be used to spe-cify the location of the sparing panel.

Class NA

Presence required

Visibility customer

Range [0..80]


Initial value

configuredProductCode

Parameter name configuredProductCode

Domain

Description This attribute specifies the product engineeringcode of the card. The default value for this attributeis empty. The operator can provision a substring orthe complete product engineering code. When thisattribute is provisioned for the active CP, it is valid-

353


ated against the inserted product engineering codeof the card during semantic check. Provisioning thisattribute for the standby CP might reset the card.When the inserted product engineering code of thecard does not match the provisioned value, thenthat card is put into rejected state.

Class NA

Presence required

Visibility customer

Range [0..12]


Initial value

sparingConnection

Parameter name sparingConnection

Domain

Description This attribute contains the identification of the 1 forN sparing panel group of connectors to which thecard is connected. This identification should coin-cide with the label located on the sparing panel.

Class NA

Presence required

Visibility customer

Range notApplicable, mainA, mainB, mainC, mainD,mainE, mainF, mainG, mainH, mainI, mainJ, mainK,mainL, mainM, spare


Initial value notApplicable

354


72 CongestionManagement (Cm)






Parents:

EM - RncIn - Cm

Child(ren):

Edch - Hsdpa -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description RncIn CongestionManagement/n This componentcontains congestion management parameters usedon the Iub interface. Iub Congestion Management isapplied to both Aal2 and IP interface type. Conges-tion Management can be used in connection withthe Iub Aal2If where Aal2If links to an instance ofCongestionManagement, or in connection with aBwPool component where BwPool links to an in-stance of CongestionManagement.

Class NA

355


Presence required

Visibility customer

Unit

Range [1..64]

Data Type Decimal

Initial Value

activation

Parameter name activation

Domain

Description This attribute sets the level of congestion manage-ment in the Aal2If or BwPool. When the attribute isset to disabled, no congestion management is per-formed. When the attribute is set to discardOnly,transport SDU discard is enabled on Aal2If or Bw-Pool. When the attribute is set to discardAndBack-Pressure, transport SDU discard is enabled andback pressure is provided to the radio network lay-er.

Class NA

Presence required

Visibility customer

Range disabled, discardOnly, discardAndBackPressure



bwPoolCellColor

Parameter name bwPoolCellColor

Domain

Description This attribute specifies whether Iub Aal2If downlinkusage should be included in the cell color algorithm.For IpIf, the Iub downlink usage is not included inthe cell color algorithm regardless of the value setby this attribute.

Class NA

Presence required

Visibility customer



356



bwPoolQosBackPressureThreshold

Parameter name bwPoolQosBackPressureThreshold

Domain

Description This attribute specifies the the tresholds (in percent-ages of discard threshold) at which back pressure isprovided to the radio network layer for each of thequality of service values. A value of 0 indicates nobackpressure, while a value other than 0 specifiesthe threshold at which the RNC will begin backpres-sure on the radio link.

Class NA

Presence required

Visibility customer

Range [0..100]


Initial value 0,0,0,0

bwPoolQosDiscardThreshold

Parameter name bwPoolQosDiscardThreshold

Domain

Description This attribute specifies the discard thresholds (inpercentages) for each of the quality of service val-ues. For Aal2If, the threshold applies to the sum ofECR of all Aal2 paths with given quality of servicevalue(bandwidth reservation may modify the basevalue). For IpIf, the threshold applies to the provi-sioned (downlinkCommitedRate,dowlinkPeakRate)for IpFlow with the given quality of service. A valueof 0 indicates no discard, while a value other than 0specifies the threshold at which the RNC will begindiscarding traffic.

Class NA

Presence required

Visibility customer

Range [0..1000]


Initial value 0,0,0,0

357


commentText


Domain

Description This attribute specifies an arbitrary string whoseuse is left to the discretion of the system adminis-trator. It is not used by the system.

Class NA

Presence required

Visibility customer

Range [0..60]


Initial value

358


73 DcsActiveAlarmServices (AAServ)





Parents:

EM - AAServ

Child(ren):

-

Identifiers:

-

Links:


Parameters:

359


74 DcsCollector (Col)





• Verbs: add,

Parents:

EM - Col

Child(ren):

Sp -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Collector/<dataType> There is a Collector for eachdata stream. It is a permanent component thatresides on the active CP. Its main function is to co-ordinate the collection of data from all its Agent sub-components and distribute that data to the down-stream applications which have requested it (for ex-ample, one or more Sessions or its Spooler sub-component). It also coordinates the time-of-day ac-counting (TODA) schedules and spooled statisticsprobes.

360


Class NA

Presence required

Visibility customer

Unit

Range accounting, alarm, debug, scn, trap, stats, rtStats,applicationSpecific


Initial Value

collectionTimes

Parameter name collectionTimes

Domain

Description This attribute specifies the scheduled times atwhich data should be collected. Only accountingapplications need the capability to generate data inthis way. Setting this attribute for other streams hasno effect. The user can enter the times in any orderand duplicates are prevented at data entry. There isa limit of 24 entries, which is imposed at semanticcheck time. The collection times are triggered inchronological order. A semantic check error is is-sued if any 2 entries are less than 1 hour apart or ifany 2 entries are more than 12 hours apart (whichimplies that if any entries are provided, there mustbe at least 2 entries). Note that by default (that is, inthe absence of a provisioned schedule), a VirtualCircuit (VC) starts its own 12-hour accounting timer.If any collection times are provisioned here, thenthe Time- Of-Day-Accounting (TODA) method isused in place of 12-hour accounting. This is applic-able to both Switched VCs and Permanent VCs.

Class NA

Presence optional

Visibility customer

Range NA

Data type Variable[24] List of Time

Initial value 00:00,01:00,02:00,03:00,04:00,05:00,06:00,07:00,08:00,09:00,10:00,11:00,12:00,13:00,14:00,15:00,16:00,17:00,18:00,19:00,20:00,21:00,22:00,23:00

361


75 DcsLpEngAalOverride (Ov)






Parents:

EM - Lp - Eng - AAList - Ov

Child(ren):

-

Identifiers:

-

Links:


Parameters:

maxListSize

Parameter name maxListSize

Domain

Description This attribute specifies the maximum number of act-ive alarms on this LP. For more details on the de-fault and other information, refer to the parent com-ponent's maxListSize attribute. Possible Values:Disabled: Do not store active alarms on this LP.10..200: AutoConfigured: System Supplied. A valueof 100 is selected in this release. Unlimited: Thisvalue indicates that the system should not limit thenumber of active alarms on this LP. Alarms can stillbe discarded if the memory resources are conges-ted.

Class NA

362


Presence required

Visibility customer

Range { [10..200],disabled, autoConfigured, unlimited }


Initial value autoConfigured

363


76 DcsLpEngActiveAlarmList (AAList)






Parents:

EM - Lp - Eng - AAList

Child(ren):

Ov -

Identifiers:

-

Links:


Parameters:

364


77 DcsLpEngDSOverride (Ov)






Parents:

EM - Lp - Eng - Ds - Ov

Child(ren):

-

Identifiers:

-

Links:


Parameters:

agentQueueSize

Parameter name agentQueueSize

Domain

Description This attribute specifies the maximum size of theDCS Agent's queue for this data stream on this LP.For more details on the defaults and other informa-tion, refer to the parent component's agentQueueS-ize attribute. The size should be set to 0 if abso-lutely no data is to be accepted from applications.There are threshold alarms based on the value ofthe Agent's currentQueueSize attribute (a Set whenthe queue becomes 75% full and a Clear after drop-ping back to 50% full). To properly determine whatto set this to, consult the "Nortel Networks Multiser-vice Switch Engineering Notes and Guidelines".The size should not be 0 for the log stream. A se-

365


mantic check prevents a user from setting the valueof this attribute to 0 for the log stream. For securityreasons, only a system administrator is allowed toset the value of this attribute for the log stream.

Class NA

Presence optional

Visibility customer

Range [0..4294967295]


Initial value N.A.

366


78 DcsLpEngDataStream (Ds)






Parents:

EM - Lp - Eng - Ds

Child(ren):

Ov -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Lp Eng DataStream/<type> This component holdsengineering parameters used by DCS on this LP fora particular DCS stream.

Class NA

Presence required

Visibility customer

Unit

Range accounting, alarm, log, debug, scn, trap, stats,

367


rtStats, applicationSpecific


Initial Value

368


79 DcsSpooler (Sp)





Parents:

EM - Col - Sp

Child(ren):

-

Identifiers:

-

Links:


Parameters:

maximumNumberOfFiles

Parameter name maximumNumberOfFiles

Domain

Description This attribute specifies the maximum number offiles that should be kept on the disk in the directorycontaining the closed files of this type. The value 0is defined to mean "unlimited". A different default foreach type of Spooler is defined as follows: - alarm:30 - accounting: 200 - debug: 2 - log: 0 (see Notebelow) - scn: 10 - trap: 2 (this value is meaninglessand is ignored) - stats: 200 - rtStats: 2 (this value ismeaningless and is ignored) - applicationSpecific:200 Note that the value of this attribute cannot bemodified for the log stream.

Class NA

Presence optional

369


Visibility customer

Range [0..200]

Data type Decimal

Initial value N.A.

spooling

Parameter name spooling

Domain

Description This attribute specifies whether or not this type ofdata is spooled to the disk. If set to off, it is roughlyequivalent to Locking the Spooler (except this willsurvive processor restarts). The following defaultsare used: - alarm: on - accounting: on - log: on - de-bug: off - scn: on - trap: off (see Note below) - stats:on - rtStats: off (see Note below) - applicationSpe-cific: on Note that SNMP Traps and rtStats cannotbe spooled. A semantic check prevents the userfrom setting the value to on for the trap stream.Spooling is always turned on for the log stream. Auser is prevented from setting the value to off forthe log stream.

Class NA

Presence optional

Visibility customer

Range on, off


Initial value N.A.

370


80 DualLpEquipmentProtection (Dlep)






Parents:

EM - Dlep

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


mainLp • Lp

•spareLp • Lp

•

Parameters:

rdnId


Domain

Description DualLpEquipmentProtection/n This componentprovides the sparing capabilities for electrical portsand server-type applications when using a dual LPsparing model. An example of when you would usethis component is when you have electrical and op-

371


tical ports on the same FP. In this situation, Dlep isused as the parent component for the spared elec-trical ports, rather than the LP/#.

Class NA

Presence required

Visibility customer

Unit

Range [0..7]

Data Type Decimal

Initial Value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

mainLp

Parameter name mainLp

Domain

372


Description This attribute specifies one of the Lps of an Lp pair.A value must be provided for this attribute, and anLp may only be associated with one Dlep compon-ent. Each of the Lps must link to only one card, thatis, spareCard is not allowed to be set on either Lp.Each Lp must have the same LogicalProcessor-Type. The cardType attribute must be identical forboth cards.

Class NA

Presence required

Visibility customer

Range Lp, Dlep

Data type HwLink

Initial value N.A.

spareLp

Parameter name spareLp

Domain

Description This attribute specifies one of the Lps of an Lp pair.A value must be provided for this attribute, and anLp may only be associated with one Dlep compon-ent. Each of the Lps must link to only one card, thatis, spareCard is not allowed to be set on either Lp.Each Lp must have the same LogicalProcessor-Type. The cardType attribute must be identical forboth cards.

Class NA

Presence required

Visibility customer

Range Lp, Dlep

Data type HwLink

Initial value N.A.

373


81 EDS1 (EDS1)






Parents:

EM - Lp - EDS1

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Lp/0 EDS1/n The EDS1 component controls a DS1external timing port on a CPeD and CP Control Pro-cessor. The EDS1 component can only be addedunder the LP/0 component and only if the CP typeis CPeD or CP. The Control Processor supports upto two external timing ports.

Class NA

Presence required

Visibility customer

374


Unit

Range [0..1]

Data Type Decimal

Initial Value

lineType

Parameter name lineType

Domain

Description This attribute defines the framing format of the DS1line. The option d4 defines a framing pattern of 12frames per multiframe. The option esf defines aframing pattern of 24 frames per multiframe. Thedefault option esf is permitted.

Class NA

Presence required

Visibility customer

Range d4, esf


Initial value esf

ssmRxDefault

Parameter name ssmRxDefault

Domain

Description This attribute specifies the Synchronization StatusMessage (SSM) reported to the NS component. Ifthis attribute is set to none, the SSM value receivedand decoded from the Extended SuperframeFormat (ESF) data link will be reported to the NScomponent. Note that the SSM messages can notbe decoded when lineType is set to d4 and in thiscase this attribute can not be set to none and therecommended value for this attribute is 4. If this at-tribute is set to a valid SSM value then this valuewill be reported to NS component, regardless of theSSM value received and decoded from the ESFdata link. The valid SSM values are specified in theANSI T1.403, bits 30-17: 2 (000010) - Stratum 1Traceable 4 (000100) - Synchronized, TraceabilityUnknown 6 (000110) - Stratum 2 Traceable 8(001000) - Stratum 3 Traceable 17 (010001) - SON-ET Minimum Clock Traceable 20 (010100) - Strat-um 4 Traceable 24 (011000) - Do not use for Syn-

375


chronization 32 (100000) - Reserved for Networksynchronization 60 (111100) - Transmit Node Clock62 (111110) - Stratum 3E Traceable

Class NA

Presence required

Visibility customer

Range none, 2, 4, 6, 8, 17, 20, 24, 32, 60, 62


Initial value 4

376


82 EE1 (EE1)






Parents:

EM - Lp - EE1

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Lp/0 EE1/n The EE1 component controls an E1 ex-ternal timing port on a CPeE and CP Control Pro-cessor. The EE1 component can only be added un-der the LP/0 component and only if the CP type isCPeE or CP. The Control Processor supports up totwo external timing ports.

Class NA

Presence required

Visibility customer

377


Unit

Range [0..1]

Data Type Decimal

Initial Value

crc4Mode

Parameter name crc4Mode

Domain

Description This attribute specifies whether the CRC-4 checkingon the E1 line is enabled or disabled.

Class NA

Presence required

Visibility customer

Range on, off


Initial value off

rxSynchClk

Parameter name rxSynchClk

Domain

Description This attribute specifies if the E1 BITS port is receiv-ing a 2.048 MHz square wave synchronization(analog) clock or an E1 data frame signal as input.A value of squareWave specifies that the analogclock is received. A value of e1Signal specifies theE1 data frame signal is received. The default valueis e1Signal. Note: The squareWave value is notsupported on MSS 15000/20000 platform.

Class NA

Presence required

Visibility customer

Range e1Signal, squareWave


Initial value e1Signal

ssmE1SaNumber

Parameter name ssmE1SaNumber

378


Domain

Description This attribute specifies which of the five availableSa Bits (Sa4 to Sa8) recommended in ITU G.704are to be used for Synchronization Status Message(SSM). The reception of SSM is disabled on thisport if this attribute is set to none, or if rxSynchClkattribute is set to squareWave, or if crc4Mode attrib-ute is set to off.

Class NA

Presence required

Visibility customer

Range { [4..8],none }


Initial value none

ssmRxDefault

Parameter name ssmRxDefault

Domain

Description This attribute specifies the default SynchronizationStatus Message (SSM) used when EE1 can not de-tect SSM because ssmE1SaNumber is set to none.The valid values are specified in the ITU G.704.

Class NA

Presence required

Visibility customer

Range [0..15]

Data type Decimal

Initial value 0

379


83 EsiToRegister (Esi)






Parents:

EM - AtmIf - Uni - Ilmi - Esi

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description AtmIf/n Uni Ilmi Esi This attribute represents theEnd System Identifier (ESI) associated with thisUNI. If the side attribute of the Uni component is setto network then there should be no Esi componentsprovisioned. If the side attribute is set to user, thenthe instance of the Esi component is a 12 hex-digituser-part address, used to compose full ATM ad-dresses that are registered with the network side.

Class NA

380


Presence required

Visibility customer

Unit

Range [12..12]

Data Type HexString

Initial Value

uniScope

Parameter name uniScope

Domain

Description This attribute defines the UNI address membershipscope for all addresses created using this ESI. Itspecifies the inclusive routing hierarchy in which theaddress is to be known. This scope is used duringILMI dynamic address registration procedures. TheuseDefaultScope value maps to localNetwork forATM group addresses, and to global for individualaddresses. The value of this attribute is ignored forUNI 3.x interfaces.

Class NA

Presence required

Visibility customer

Range useDefaultScope, localNetwork, localPlusOne, loc-alPlusTwo, siteMinusOne, intraSite, intra-SitePlusOne, organizationMinusOne, intraOrganiza-tion, organizationPlusOne, communityMinusOne,intraCommunity, communityPlusOne, regional, in-terRegional, global


Initial value useDefaultScope

381


84 Ethernet (Eth)






Parents:

EM - Lp - Eth

Child(ren):

Om - Tm -

Identifiers:


MaxIn-stances


Links:


applicationFramerName • La Framer

• Vr Ip Fwd

• AtmIf

• ARtg Pnni Top NodeNameHLnk

•

Parameters:

rdnId


Domain

Description Lp/n Ethernet/n The Ethernet component controlsand monitors an Ethernet port on a function pro-

382


cessor. The number of ports supported depends onthe type of the card. The instance number of theEthernet component corresponds to the physicalport number on the card.

Class NA

Presence required

Visibility customer

Unit

Range [0..3]

Data Type Decimal

Initial Value



Domain

Description This attribute specifies which application uses theEthernet component.

Class NA

Presence required

Visibility customer

Range La Framer, Vr Ip Fwd, AtmIf, ARtg Pnni Top Node-Name HLnk, ARtg Pnni Top Node HLnk


Initial value N.A.

autoNegotiation

Parameter name autoNegotiation

Domain

Description This attribute specifies that auto negotiation isturned on or off for the ethernet port. This attributemust be set to off, if the far-end does not supportauto-negotiation.

Class NA

Presence required

Visibility customer

Range off, on


Initial value on

383


commentText


Domain

Description Any miscellaneous text about the facility.

Class NA

Presence required

Visibility customer

Range [0..60]


Initial value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

duplexMode

384


Parameter name duplexMode

Domain

Description This attribute specifies the duplex mode of the eth-ernet port. This attribute is ignored if auto negoti-ation is successful.

Class NA

Presence required

Visibility customer

Range half, full


Initial value full

ifAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up

includeAdminInfoInAlarm

Parameter name includeAdminInfoInAlarm

Domain

Description This attribute specifies that user defined text con-tained in vendor and commentText attributes of thisVendorInfo instance will be appended to the com-ment text of any alarms, excluding hardware initial-ization alarms, for the associated interface port ifthis attribute is set to on.

Class NA

Presence required

Visibility customer

385


Range no, yes


Initial value no

lineSpeed

Parameter name lineSpeed

Domain

Description This attribute specifies the operating speed of theethernet port. This attribute is ignored if auto negoti-ation is successful.

Class NA

Presence required

Visibility customer

Range 10, 100, 1000


Initial value N.A.

losDuringMigration

Parameter name losDuringMigration

Domain

Description This attribute specifies that the loss of sync is en-abled or disabled during the migration processwhen the card is part of the migration shelf.

Class NA

Presence required

Visibility customer




maxFrameSize

Parameter name maxFrameSize

Domain

Description This attribute specifies the maximum frame size al-lowed on the link. Frames received on the link thatare greater that the max frame size are discardedand counted in the framesTooLong attribute or in

386


the jabbers attribute if the FCS is bad. The maxim-um frame size calculation includes the 802.3/v2 eth-ernet header and CRC or FCS octets, and excludesPreamble and Inter-Packet Gap. Recommendedframe sizes are: 1518 for port-mode, 1522 for Vlan-mode, and anything up to 9182 for Jumbo Frame.

Class NA

Presence required

Visibility customer

Range [1518..9182]

Data type Decimal

Initial value 1518

statisticsSpooling

Parameter name statisticsSpooling

Domain

Description This attribute specifies that DCS statistics spoolingfunctionality is enabled or disabled for this ethernetport.

Class NA

Presence required

Visibility customer




vendor

Parameter name vendor

Domain

Description This is the name of the vendor supplying the facility.

Class NA

Presence required

Visibility customer

Range [0..20]


Initial value

387


388


85 EthernetPolicy (Policy)






Parents:

EM - La - Policy

Child(ren):

-

Identifiers:

-

Links:


Parameters:

egressTagRule

Parameter name egressTagRule

Domain

Description This attribute specifies the tagging rule for framestransmitted to the Ethernet interface. This attributeis only applicable if the Ethernet interface is operat-ing in VLAN mode. Otherwise, this attribute is ig-nored, and has no effect on the traffic transmitted tothe interface. The possible values are: untagged -this value specifies that all packets, including con-trol packets that are associated with the port-VLAN,are transmitted on the Ethernet interface without anIEEE 802.1Q tag header. tagged - this value spe-cifies that all packets, including control packets thatare associated with the port-VLAN, are transmittedto the Ethernet interface with an IEEE 802.1Q tag

389


header, with the VLAN ID value set to the port-VLAN ID (i.e. VID = 1).

Class NA

Presence required

Visibility customer

Range untagged, tagged


Initial value N.A.

unknownVlanIdTreatment

Parameter name unknownVlanIdTreatment

Domain

Description This attribute specifies the treatment of IEEE802.1Q VLAN tagged traffic received from the inter-face for which there is no provisioned Vlan compon-ent instance. The possible values are: discard: thisvalue specifies that all packets received from the in-terface, including control packets, that are taggedwith a VLAN Id that is not configured on the port areto be discarded. The EthernetStatistcs unknown-VlanId and lastUnknownVlanId attributes indicatethose packets. accept: when this Ethernet interfaceis operating in port-mode, this value specifies thatall packets received from the interface, includingcontrol packets, that are VLAN-tagged are to be ac-cepted and handled by the configured service.When this Ethernet interface is operating in VLAN-mode, this value specifies that all packets receivedfrom the interface, including control packets, thatare tagged with a VLAN Id, that is not configured onthe port, are to be treated by the port-VLAN. If theport-VLAN is not configured on the Ethernet inter-face, that traffic is discarded.

Class NA

Presence required

Visibility customer

Range discard, accept


Initial value discard

vlanAware

390


Parameter name vlanAware

Domain

Description This attribute specifies the operating mode of thisEthernet interface, when no Vlan components areconfigured for this LanApplication. It specifieswhether the interface is to operate in LAN-mode orin VLAN-mode. This attribute is ignored if there is atleast one Vlan component configured for thisLanApplication. When this attribute is set to dis-abled, this Ethernet interface operates in port-mode. In this mode, all untagged and priority-tagged traffic is accepted. Optionally, VLAN-taggedtraffic can either be accepted or discarded depend-ing on the value of the unknownVlanTreatment at-tribute. When this attribute is set to enabled, thisEthernet interface operates in VLAN-mode, as theport-VLAN. In this mode, all untagged, priority-tagged and port-VLAN tagged traffic is accepted.Optionally, VLAN-tagged traffic can either be ac-cepted or discarded depending on the value of theunknownVlanTreatment attribute. For an EVLSEVC, if this attribute is set to enabled, this interfacerepresents the port-VLAN (i..e, VID=1). Modifyingthis attribute may result in loss of connectivity.

Class NA

Presence required

Visibility customer




391


86 EthernetStatistics (Stats)





Parents:

EM - La - Vlan - Stats

Child(ren):

-

Identifiers:

-

Links:


Parameters:

392


87 EthernetVirtualLanIdentifier (Vlan)






Parents:

EM - La - Vlan

Child(ren):

Stats -

Identifiers:


MaxIn-stances


Links:


linkToProtocolPort Vr Pp

Parameters:

rdnId


Domain

Description La/n Vlan/m This component represents an Ether-net Virtual Local Area Network (VLAN). It is re-sponsible for the Ethernet U-plane (user-plane) pro-tocol for the specified LanApplication instance. Theinstance values of 0 and 1 are reserved VLAN IDs.The value of 0 is reserved for priority tagged traffic,and 1 is for port-VLAN tagged traffic. The instancevalue is used to identify the logical connection, mul-tiplexed within the physical channel, with which an

393


Ethernet frame is associated. All frames carriedwithin a particular physical channel and carrying thesame VLAN identifier value are associated with thesame logical connection. Each Vlan component in-stance can be either linked to a VirtualRouter or aVpnRouteForwarder component, or configured toestablish an EthernetVirtualConnection component.Semantic checks enforce that either the Ether-netVirtualConnection subcomponent is provisionedunder the Vlan component, or the linkToProtocol-Port or enetConnection attribute is set.

Class NA

Presence required

Visibility customer

Unit

Range [2..4094]

Data Type Decimal

Initial Value

correlationTag


Domain

Description This attribute specifies a unique string, set by theoperator, which identifies the connection. Normally,this value is provisioned with the same value ateach end of the connection.

Class NA

Presence required

Visibility customer

Range [0..64]


Initial value

ifAdminStatus


Domain

Description The desired state of the interface. The up state in-dicates the interface is operational. The down stateindicates the interface is not operational. The test-ing state indicates that no operational packets can

394


be passed.

Class NA

Presence required

Visibility customer



Initial value up

linkToProtocolPort

Parameter name linkToProtocolPort

Domain

Description This attribute specifies the ProtocolPort componentto which the application is associated. This attributemust not be set if the Vlan enetConnection attributeis set or there is the EthernetVirtualConnection sub-component under this Vlan component.

Class NA

Presence required

Visibility customer

Range Vr Pp


Initial value N.A.

statisticsSpooling


Domain

Description This attribute specifies whether the Ethernet statist-ics spooling is enabled or disabled.

Class NA

Presence required

Visibility customer




395


88 FcrcOverride (Ov)






Parents:

EM - Lp - Eng - Fcrc - Ov

Child(ren):

-

Identifiers:

-

Links:


Parameters:

lnnConnectionPoolCapacity

Parameter name lnnConnectionPoolCapacity

Domain

Description This attribute indicates the maximum number of re-source records for the connections which utilize Lo-gical Network Number (LNN) on the LogicalPro-cessor. A logical network is a subset of nodes to-gether with a subset of trunks that interconnectthose nodes. It carries the traffic for a defined set ofnetwork protocols. An LNN is used to identify a lo-gical network. The connectionless services that util-ize the logical networks require some processing atthe intermediate nodes. This pool is allocated at theintermediate nodes to sustain these connectionlessservices. If the McsMgr DprsMcsEpG/n Ep/n EpDtransportConnectionPreference attribute is set to at-

396


mOnly, each instance of the McsMgr DprsMcsEpG/n Ep/n component uses one resource record fromthis pool, otherwise it does not use this pool. Note:Frame and Cell queues also compete for thismemory. Each DPRS instance requires two re-source records from this pool. The maximum size ofthis pool is 256 for CQC based cards. The defaultcardDependent has the effect of setting lnnConnec-tionPoolCapacity to 128 for CQC cards and 256 forSGAF cards.

Class NA

Presence required

Visibility customer

Range { [1..2048],cardDependent }


Initial value cardDependent

subConnectionPoolCapacity

Parameter name subConnectionPoolCapacity

Domain

Description This attribute indicates the maximum number ofsub-connections for the LogicalProcessor. A sub-connection is used for interworking the ATM ser-vices with the frame oriented services such asFrame Relay and Path Oriented Routing System(PORS). When a frame is received at a sub- con-nection, the frame header is modified to be compat-ible with the service it is to be forwarded to. Due tolimited resources, not all of the sub-connections re-quested by this attribute may be allocated. The de-sired number of sub- connections allocated is indic-ated by the sum of fcrc subConnectionPoolAvail-able and fcrc subConnectionPoolUsage attributes.This pool is used for connection oriented servicesonly. Each of the following services uses one ormore sub-connections from this pool: Any FrameRelay DLCI (provisioned [permanent] or signalled(SVC))[FRUNI, FRNNI, FRATM, BNX, IP Optim-ized] Any PORS LCN Any MPLS connection Whenthe sub-connection pool is exhausted, no more con-nections are accepted from the services which util-ize this pool. Note: Ip Routing entries also competefor this memory. The maximum size of this pool is8192 for CQC based cards. The default cardDe-pendent has the effect of setting subConnection-PoolCapacity to 1024 for both CQC cards and

397


SGAF cards.

Class NA

Presence required

Visibility customer

Range { [0..49152],cardDependent }


Initial value cardDependent

398


89 FcrcPassportQueueController (Pqc)






Parents:

EM - Lp - Eng - Fcrc - Pqc

Child(ren):

Ov -

Identifiers:

-

Links:


Parameters:

399


90 FcrcPqcOverride (Ov)





Parents:

EM - Lp - Eng - Fcrc - Pqc - Ov

Child(ren):

-

Identifiers:

-

Links:


Parameters:

extendedQueueInfra

Parameter name extendedQueueInfra

Domain

Description This attribute applies only to the PQC12-based4pDS3Ch FR card and via the on/off state allows aseparate PQC software queue infrastructure to beused; turning this on will have a performance im-pact. The default is off.

Class NA

Presence required

Visibility customer

Range off, on


Initial value off

400


ipRoutesPoolCapacity

Parameter name ipRoutesPoolCapacity

Domain

Description This attribute indicates the number of desired IProuting entries for the Logical Processor. It is usedto determine the number of IP routing resources tobe allocated on the card. Each IP routing resourcecan hold between one and three IP routing entries.To calculate the number of IP routing resources re-quired, an average of 2 IP routing entries per IProuting resource is used. If there are not enough re-sources on the card, a smaller pool is allocated.Operational attribute (in Fcrc Pqc) ipRoutesPoolS-ize indicates the actual size of the pool.

Class NA

Presence required

Visibility customer

Range [0..100000]

Data type Decimal

Initial value 4096

401


91 FrameCoreResourceControl (Fcrc)






Parents:

EM - Lp - Eng - Fcrc

Child(ren):

Ov - Pqc -

Identifiers:

-

Links:


Parameters:

402


92 GrmEmissionPriority (Ep)






Parents:

EM - Lp - Eth - Tm - Ep

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Lp/x Eth/y Tm EmissionPriority/n This componentrepresents an emission priority of the Lp/x Eth/ycomponent. Component instances Ep/0 and Ep/1represent absolute priorities which have preced-ence over emission priorities represented by com-ponent instances Ep/2 through Ep/7. ComponentEp/0 has the highest priority. All traffic associatedwith component Ep/0 is transmitted on the link first,followed by traffic associated from component Ep/1.When all traffic at Ep/0 and Ep/1 have been sent,

403


other Ep component queues get the opportunity totransmit with the residual bandwidth. This compon-ent has instances from Ep/2 to Ep/7 that operateunder the weighted fair queue strategy, with eachqueue using a bandwidth attribute for weight to al-locate service opportunities left over by Ep/0 andEp/1.

Class NA

Presence required

Visibility customer

Unit

Range [0..7]

Data Type Decimal

Initial Value

minimumBandwidthGuarantee

Parameter name minimumBandwidthGuarantee

Domain

Description This attribute specifies the weight available to thisqueue. It determines the relative amount of residualbandwidth left by components Ep/0 and Ep/1 that isallocated to this queue. The amount of bandwidthallocated is the weight of this queue divided by thesum of the weights of components Ep/2 through Ep/7 multiplied against the residual bandwidth. For ex-ample, if the weight of this queue divided by thesum of the weights from Ep/2 through Ep/7 is 2%,and 80% of the link bandwidth is left after Ep/0 andEp/1 traffic is sent, then the amount of bandwidthavailable to this Ep queue is 2% of 80% (or 1.6%)of the link bandwidth. The default weight values are50, 25, 10, 7, 5, 3 assigned to components Ep/2,Ep/3, Ep/4, Ep/5, Ep/6, and Ep/7, respectively.

Class NA

Presence required

Visibility customer

Range { [0.00..100.00],autoConfig }


Initial value autoConfig

redMode

404


Parameter name redMode

Domain

Description This attribute specifies whether random early pack-et discard is set to a value of either disable or en-able for the queue. It serves as an early warning ofcongestion with the occasional packet being dis-carded when the queue begins to be congested, butit is not a congestion control mechanism in itself. Noframe is randomly discarded if this attribute is set todisable. If it is set to enable, only the frames whosered bit is set are targeted to be randomly discarded.In PCR5.1, the upstream device sets the red bit ofevery frame so that random early discard is con-trolled by the setting of this attribute. The default isdisable.

Class NA

Presence required

Visibility customer

Range disable, enable


Initial value disable

txQueueSize

Parameter name txQueueSize

Domain

Description This attribute represents the maximum size of thequeue used for buffering traffic associated with theEp. For the 4pGE card, each of the port's 8 Ep/xqueues have a maximum queue size for itstxQueueSize attribute. The maximum queue sizesare 500K, 500K, 500K, 500K, 7M, 4.2M, 3M, and2.2M for each Ep/0, Ep/1, Ep/2, Ep/3, Ep/4, Ep/5,Ep/6 and Ep/7 components, respectively. The de-fault values are 100K, 300K, 300K, 300K, 7M,4.2M, 3M, and 2.2M for each of Ep/0, Ep/1, Ep/2,Ep/3, Ep/4, Ep/5, Ep/6 and Ep/7 components, re-spectively. On the 4pEth100BaseT and8pEth100BaseT cards, each of the port's 8 Ep/xqueues txQueueSize attribute can be configured upto an upper limit, determined by the buffer size ofthe card. The limit is 15MBytes for each of the Ep/xcomponents. The default values are 100K, 300K,100K, 300K, 1.5M, 1.5M, 1M and 1M for each ofEp/0, Ep/1, Ep/2, Ep/3, Ep/4, Ep/5, Ep/6 and Ep/7components, respectively. The autoConfig sets the

405


txQueueSize to the default value corresponding tothe component instance.

Class NA

Presence required

Visibility customer

Range { [0..15000000],autoConfig }



406


93 GrmServiceCategory (Sc)






Parents:

EM - Lp - Eth - Tm - Sc

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Lp/x Eth/y Tm ServiceCategory/m This componentrepresents the default characteristics of the servicecategory for queue scheduling. They can be flexiblyre-mapped to physical emission priorities.

Class NA

Presence required

Visibility customer

Unit

407


Range [0..7]

Data Type Decimal

Initial Value

408


94 GrmTrafficManager (Tm)





Parents:

EM - Lp - Eth - Tm

Child(ren):

Ep - Sc -

Identifiers:

-

Links:


Parameters:

statisticsSpooling


Domain

Description This attribute specifies that DCS statistics spoolingfunctionality is enabled or disabled for this Tm com-ponent.

Class NA

Presence required

Visibility customer




409


95 Interface (If)






Parents:

EM - Vm - If

Child(ren):

-

Identifiers:


MaxIn-stances


Links:



Parameters:

rdnId


Domain

Description Vm/n Interface/n This component represents a lo-gical interface to the VirtualMedia. The given Virtu-alMedia instance can have at most one Interfacelinked to a ProtocolPort of a given VirtualRouter.

Class NA

Presence required

Visibility customer

410


Unit

Range [0..15]

Data Type Decimal

Initial Value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

ifAdminStatus


Domain


Class NA

411


Presence required

Visibility customer



Initial value up

linkToProtocolPort


Domain

Description This attribute specifies the ProtocolPort to whichthis interface is linked to. The protocol port is the lo-gical interface to the network. The protocol portcomponent describes the logical characteristics ofthis interface.

Class NA

Presence required

Visibility customer

Range Vr Pp


Initial value N.A.

mode

Parameter name mode

Domain

Description This attribute specifies the mode of operation of theVm If. The following modes are supported: al-waysUpInterface, alwaysUpSummaryInterface andinterVrConnection. alwaysUpInterface: This modelimits the Vm If to provide the functionality of an 'al-ways up interface' only. Inter-VR communcation isnot possible when this mode is selected. Memoryconsumption by the Vm If is significantly less on theFP when this mode is selected. Hence this modeshould be used when the sole purpose of the Vm Ifis to provide an always up interface for an applica-tion like BGP4. alwaysUpSummaryInterface: Thismode limits the Vm If to provide the functionality ofan 'always up interface' in which more than onehost can be sumarized. Inter-VR communcation isnot possible when this mode is selected. Memoryconsumption by the Vm If is significantly less on the

412


FP when this mode is selected. Hence this modeshould be used when the sole purpose of the Vm Ifis to provide an always up interface for an applica-tion like VPN in which specific host information isconfigured by the user. interVrConnection: Thismode provides the full capability of VirtualMedia,that is, 'always up interface' and inter-VR commu-nication.

Class NA

Presence required

Visibility customer

Range alwaysUpInterface, interVrConnection, al-waysUpSummaryInterface


Initial value alwaysUpInterface

413


96 InwArp (Arp)





Parents:

EM - Vr - Ip - Arp

Child(ren):

Host -

Identifiers:

-

Links:


Parameters:

autoRefresh

Parameter name autoRefresh

Domain

Description This attribute is used to enable or disable the ARPrefresh feature.

Class NA

Presence required

Visibility customer




autoRefreshTimeout

414


Parameter name autoRefreshTimeout

Domain

Description This attribute defines the timeout value, in minutes,which is assigned to updated ARP entries, or newlycreated ARP entries. The range for the timeout is 1minute to 1440 minutes (24 hours).

Class NA

Presence required

Visibility customer

Range [1..1440]

Data type Decimal

Initial value 5

retryTimes

Parameter name retryTimes

Domain

Description This attribute defines the number of times that anARP request will be sent to a remote host if there isno reply received. This value is assigned when ARPentries are updated or created. The range of thevalue can be from 0 to 127.

Class NA

Presence required

Visibility customer

Range [0..127]

Data type Decimal

Initial value 127

415


97 InwAtmConnection (Ac)






Parents:

EM - AtmMpe - Ac

Child(ren):

DstPvc - SrcPvc -

Identifiers:


MaxIn-stances


Links:




• AtmIf Vcc Nep

•linkToIpLogicalInterface Vr Pp IpPort LogicalIf

Parameters:

rdnId


Domain

Description AtmMpe/n AtmConnection/n This component rep-resents a virtual channel through which internet-working frames are transported using RFC 1483

416


encapsulation. The AtmConnection component con-tains OSI state information, frame based statistics,and the linkage to an ATM virtual channel connec-tion. This component's instance value is used byhigher-layer protocols when referring to a specificATM connection.

Class NA

Presence required

Visibility customer

Unit

Range [1..255]

Data Type Decimal

Initial Value

atmConnection


Domain

Description This attribute specifies the ATM nailed up endpoint,AtmIf/n Vcc/ vpi.vci Nep, that this connection is as-sociated with. It must not be provisioned for anSPVC connection.

Class NA

Presence optional

Visibility customer



Initial value N.A.

commentText


Domain

Description This attribute specifies an arbitrary string whoseuse is left to the discretion of the system adminis-trator. It is not used by the system. For example,this attribute could be used to specify the name ofthe entity which is connected to this interface.

Class NA

Presence required

417


Visibility customer

Range [0..60]


Initial value

ipCos

Parameter name ipCos

Domain

Description This attribute specifies the connection class of theAtmConnection. This value is used to distinguishthe connection from others for the purpose of IPand MPLS forwarding and accounting. Connectionclass values vary in range from 0 to 3 allowing up tofour connections to be distinguished on each nexthop between routers. If a packet is forwarded by aProtocolPort or Interface configured to use morethan one AtmConnection, then one of the connec-tions is selected for transmitting the packet. For IPpackets the selection is based on either the Differ-entiated Services Code Point (DSCP) field of the IPpacket or the Class of Service (CoS) assigned tothe packet. For MPLS packets the selection isbased on either the DSCP field of the IP packet orthe EXP field of the MPLS packet. DSCP based se-lection of the outgoing connection is explained inthe description of the DifferentiatedServicesDomaincomponent. EXP based selection of the the outgo-ing connection is explained in the description of theMplsServiceMap component. Class of Service(CoS) based selection of the outgoing connection isexplained in the description of the Vr Ip CosPolicy-Group component. Modifying this attribute will resetthe AtmConnection. If the AtmConnection is usedby a VirtualRouter ProtocolPort and the Virtual-Router does not have a DifferentiatedServicesDo-main subcomponent, then ipCos also specifies theinitial Class of Service (CoS) value assigned to anIP packet received on the AtmConnection. See thedescription of Vr Ip CosPolicyGroup for more in-formation. Changing this attribute is a criticalchange and will result in a service outage on thisAtmConnection when the AtmMpe linkToProtocol-Port attribute is set. This attribute is ignored whenthe AtmMpe bridgePortLink attribute is set.

Class NA

Presence required

418


Visibility customer

Range [0..3]

Data type Decimal

Initial value 0

linkToIpLogicalInterface

Parameter name linkToIpLogicalInterface

Domain

Description This attribute specifies the IP logical interface, Vr/mPp/n IpPort LogicalIf/ipAddress, that this connectionis associated with. This attribute is not applicableand cannot be set when the AtmConection compon-ent is added under an Rtr If AtmMpe or an Rtr Vrf IfAtmMpe component. When set, the value of this at-tribute must be consistent with the linkToPrototocol-Port attribute value of the parent AtmMpe compon-ent. That is, they must both point to the same Proto-tocolPort component.

Class NA

Presence optional

Visibility customer

Range Vr Pp IpPort LogicalIf


Initial value N.A.

mplsSignaling

Parameter name mplsSignaling

Domain

Description This attribute specifies whether this AtmMpe Ac isdedicated for MPLS signaling (LDP or CR-LDP), orshared between MPLS and IP. If the value is dedic-ated, the Ac is dedicated for MPLS signaling; theroute is not found in IP ARP. If the value is shared,the Ac is accessible by IP. The checking of this pro-visionable attribute is done through semantic check-ing. The attribute takes on the value shared by de-fault, and can only be dedicated if there are morethan one Ac under the AtmMpe. Changing this at-tribute is a critical change and will result in a serviceoutage on this AtmConnection when the AtmMpelinkToProtocolPort attribute is set. This attribute isignored when the AtmMpe bridgePortLink attribute

419


is set. DESCRIPTION

Class NA

Presence required

Visibility customer

Range shared, dedicated


Initial value shared

420


98 InwAtmMpe (AtmMpe)






Parents:

EM - AtmMpe

Child(ren):

Ac - Stp -

Identifiers:


MaxIn-stances


Links:



bridgePortLink Vr Pp

Parameters:

rdnId


Domain

Description AtmMpe/n This component represents a logical in-terface between either a Virtual Router (Vr, Rtr, orVrf) or a Virtual Bridge (Vb) and an ATM media(AtmIf). Multiprotocol encapsulation as specified inRFC1483 is used to transfer higher-layer protocoldata across virtual channels in an ATM network. AnAtmMpe component provide a means to associate

421


multiple ATM virtual channel connections with asingle VirtualRouter ProtocolPort, or a single ATMvirtual channel connection with a single Virtual-Bridge TransparentBridge BridgePort. The AtmMpecomponent is associated with a ProtocolPort via alinkage attribute and virtual channel connections viaa linkage attribute in each AtmConnection subcom-ponent. The AtmMpe component is associated witha BridgePort via a linkage attribute and virtual chan-nel connections via a linkage attribute in each Atm-Connection subcomponent. An AtmMpe can onlybe linked to either a ProtocolPort or a BridgePort.

Class NA

Presence required

Visibility customer

Unit

Range [0..2047]

Data Type Decimal

Initial Value

bridgePortLink

Parameter name bridgePortLink

Domain

Description This attribute specifies the associated Vb TbBridgePort component instance. When this attributeis set, the encapType attribute must be set to thevalue of llcBridgeEncap and the maxTransmis-sionUnit attribute must have a value less than orequal to 1524.

Class NA

Presence optional

Visibility customer

Range Vr Pp


Initial value N.A.

customerIdentifier


Domain


422



Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

encapType

Parameter name encapType

Domain

Description This attribute specifies the RFC-1483 encapsulationtype to be used for the AtmConnections under thisAtmMpe. Specifying llcEncap allows multiplexing ofmultiple protocols over the VCCs. The protocol ofthe carried PDU will be identified by an IEEE 802.2Logical Link Control header. If Inverse ARP is to becarried over a VCC, llcEncap must be used. If theStp component exists under the AtmMpe, llcEncapmust be used. Specifying ipVcEncap indicates thatall the VCCs (that is, AtmConnections) under an At-mMpe component will use VC-based multiplexingand will carry IP PDUs only. Specifying llcBridgeEn-cap indicates that the VCC (that is, the AtmConnec-tion) under an AtmMpe component will use thebridged Ethernet encapsulation format specified inRFC-1483. When the encapType attribute is set toa value of llcBridgeEncap only one AtmConnectionsubcomponent can exist under the AtmMpe com-ponent. When the AtmMpe bridgePortLink attributeis set the encapType must be set to llcBridgeEncap.

423


When the AtmMpe linkToProtocolPort attribute isset, and the encapType attribute is set to a value ofllcBridgeEncap the following restrictions exist:1.The maxTransmissionUnit must be set within therange [256 .. 1524]. 2. The AtmConnection instancemust be 1.

Class NA

Presence required

Visibility customer

Range llcEncap, ipVcEncap, llcBridgeEncap


Initial value llcEncap

ifAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up

linkToProtocolPort


Domain

Description This attribute contains a protocol port componentname. The attribute associates an AtmMpe applica-tion with a protocol port.

Class NA

Presence required

Visibility customer

Range Vr Pp


424


Initial value N.A.

maxTransmissionUnit

Parameter name maxTransmissionUnit

Domain

Description This attribute sets the size of the largest datagramwhich can be sent on the interface. This includesthe size of the Logical Link Control header (if applic-able) as well as the protocol data unit. This attributemust be set to a value less than or equal to 1524when the linkToProtocolPort attribute is set, and theencapType attribute is set to llcBridgeEncap. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,3pDS3Atm2, 3pE3Atm2, and MSA32 cards, the mtuis not enforced when the bridgePortLink attribute isset.

Class NA

Presence required

Visibility customer

Range [256..9188]

Data type Decimal

Initial value 9188

rxPacketWiseDiscard

Parameter name rxPacketWiseDiscard

Domain

Description This attribute specifies whether packet-wise discardfunctions are to be enabled or disabled in the re-ceive data direction for this connection. Packet-wisediscard functions apply to AAL5 frame traffic. Pack-et-wise functions increase the "goodput" of the link.The receive packet-wise function is Partial PacketDiscard (PPD). PPD allows the connection to dis-card the remainder of a cell- forwarded AAL5 frameif one cell of this frame has been discarded, for ex-ample due to UPC. All cells are discarded up to butnot including the EOM cell. The PPD function in-creases the "goodput" of the link, since cells whichare only going to be discarded at the AAL5 reas-sembly point are not transmitted. For2pOC3MmAtm2, 2pOC3SmAtm2, 2pSTM1eAtm,3pDS3Atm2, 3pE3Atm2, and MSA32 cards, whenthis attribute is set to enabled, the AtmConnection

425


associated with a VCC on these FPs have the abil-ity to automatically detect AAL5-segmented traffic,and only enable packet-wise discards ifAAL5-segmented traffic is detected. A value of en-abled means packet-wise discard functions are ap-plied to receive traffic at this connection point. Avalue of disabled means packet-wise discard func-tions are not applied to receive traffic at this con-nection point. At a SPVC origin on a PNNI interface,a value of enabled specifies that frame discard isrequested in the forward direction. When this attrib-ute is set to disabled, forward frame discard is notrequested in the SPVC call setup. Setting this attrib-ute to enabled is only supported when the AtmMpebridgePortLink attribute is set.

Class NA

Presence required

Visibility customer




txPacketWiseDiscard

Parameter name txPacketWiseDiscard

Domain

Description This attribute specifies whether packet-wise discardfunctions are to be enabled or disabled in the trans-mit data direction for this connection. Packet-wisediscard functions apply to AAL5 frame traffic. Pack-et-wise functions increase the "goodput" of the link.The transmit packet-wise functions are Early PacketDiscard (EPD) and Partial Packet Discard (PPD).EPD allows the connection to discard an entireframe once the transmit queue has reached theEPD threshold. EPD increases the "goodput" of alink, since discarding an entire frame means thatsome queue capacity is guarded for some otherframe which is already partially transmitted. All cellsof the frame are discarded from the Beginning ofMessage (BOM) cell up to and including the End ofMessage (EOM) cell. PPD allows the connection todiscard the remainder of a cell- forwarded AAL5frame if one cell of this frame has been discarded.All cells are discarded up to but not including theEOM cell. The PPD function increases the "good-put" of the link, since cells which are only going to

426


be discarded at the AAL5 reassembly point are nottransmitted. For 2pOC3MmAtm2, 2pOC3SmAtm2,2pSTM1eAtm, 3pDS3Atm2, 3pE3Atm2, andMSA32 cards, packet-wise discard functions in-clude EPD and PPD. PPD and EPD apply to indi-vidual VCCs connections. Both PPD and EPD arecontrolled by this attribute. When this attribute is setto enabled, the AtmConnection associated with aVCC on these FPs have the ability to automaticallydetect AAL5-segmented traffic, and only enablepacket-wise discards if AAL5-segmented traffic isdetected. A value of enabled means packet-wisediscard functions are applied to transmit traffic atthis connection point. A value of disabled meanspacket-wise discard functions are not applied totransmit traffic at this connection point. At a SPVCorigin on a PNNI interface, a value of enabled spe-cifies that frame discard is requested in the back-ward direction. When this attribute is set to dis-abled, backward frame discard is not requested inthe SPVC call setup. Setting this attribute to en-abled is only supported when the AtmMpe bridge-PortLink attribute is set.

Class NA

Presence required

Visibility customer




427


99 InwDstPvc (DstPvc)






Parents:

EM - AtmMpe - Ac - DstPvc

Child(ren):

-

Identifiers:

-

Links:


Parameters:

428


100 InwEgressCosTreatment (Ect)





• Verbs: add,

Parents:

EM - Vr - Ip - Pg - Ect

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Pg/<string> EgressCosTreatment/n Aset of EgressCosTreatment components specifiestwo mappings. One is a mapping between Class ofService (CoS) values and logical scheduling classvalues for controlling forwarding behaviors. The oth-er is a mapping between Class of Service (CoS)values and Differentiated Services Code Point(DSCP) values for egress marking. These map-pings are applied to packets transmitted at any Ip-Port that uses the parent CosPolicyGroup. See the

429


description of the CosPolicyGroup for more inform-ation. Four instances of this component, with in-stance values 0, 1, 2, and 3, are created automatic-ally when the CosPolicyGroup component is added.

Class NA

Presence required

Visibility customer

Unit

Range [0..3]

Data Type Decimal

Initial Value

emissionPriority


Domain

Description This attribute specifies the logical schedulingclasses to be assigned to an IP packet when theClass of Service (CoS) assigned to the packet isequal to the instance value of the IngressCosTreat-ment component. The emissionPriority attribute ismapped to scheduling classes according to the fol-lowing table: --------------------------------------------------------------------------Emission Logical Scheduling Class Priority 8Queues 4Queues 3 2 Queues --------------------------------------------------------------------------1 5 3 1 2 4 2 0 3 2 1 0 4 0 0 0 5 0 0 0 6 0 0 0 7 0 00 8 0 0 0 Scheduling classes are assigned to apacket to control its scheduling behavior relative toother packets at the egress interface where thepackets are transmitted. Generally, a numericallyhigher value of scheduling class (lower value ofemission priority) indicates the packet is less likelyto be delayed. This traffic is considered more urgentand less delay tolerant. A numerically lower value ofscheduling class (higher value of emission priority)indicates the packet is more likely to be delayed.This traffic is considered less urgent and more

430


delay tolerant. The actual scheduling behavior ofpackets depends on the scheduling mechanism andnumber of queues at the egress interface. A warn-ing is issued if the emissionPriority attribute of twoEgressCosTreatment subcomponents with thesame instance value under any two CosPolicy-Group subcomponents of the Vr Ip are not equal. Ifthis rule is violated, then the Class of Service (CoS)to emissionPriority mapping will not be consistent atall IpPorts on the Vr. See the description of theCosPolicyGroup for more information.

Class NA

Presence optional

Visibility customer

Range [1..8]

Data type Decimal

Initial value N.A.

setTosByte

Parameter name setTosByte

Domain

Description This attribute specifies whether the DSCP field ofthe packet should be marked at egress. If this attrib-ute is set to yes and then the DSCP field is markedaccording to the values of the tos and tosMask at-tributes of the EgressCosTreatment componentwhose instance value is equal to the Class of Ser-vice (CoS) assigned to the packet. A warning is is-sued if not all EgressCosTreatment subcomponentsof the CosPolicyGroup have this attribute set to thesame value.

Class NA

Presence required

Visibility customer

Range no, yes


Initial value no

tos

Parameter name tos

Domain

431


Description This attribute specifies the value used to mark theDSCP field of an IP packet at egress. This markingoccurs only if the Class of Service (CoS) assignedto the packet is equal to the instance value of theEgressCosTreatment component and the setTos-Byte attribute is set to yes. Selected bits of the Dif-ferentiated Services (DS) field in IP packet header(also known as the ToS field) are updated accord-ing to the values of the tos and tosMask attributesusing the following formula: New value = ( Originalvalue & ~tosMask ) | ( tos & tosMask ) This formulastates that the bits of the DS field which are modi-fied are only those which are set to 1 in the tosMaskattribute value. Of those bits, the bits that are set to1 are only those which are set to 1 in the tos attrib-ute value; the others being modified are set to 0.For example, to mark the DSCP field for ExpeditedForwarding (EF): original value: hex A0 ( binary10100000 ) CS5 tos attribute: hex B8 ( binary10111000 ) tosMask attribute: hex FC ( binary11111100 ) new value: hex B8 ( binary 10111000 )EF

Class NA

Presence required

Visibility customer

Range [0..ff]

Data type Hex

Initial value 0

tosMask

Parameter name tosMask

Domain

Description This attribute specifies the bit mask used to markthe DSCP field of an IP packet. This marking occursonly if the Class of Service (CoS) assigned to thepacket is equal to the instance value of theEgressCosTreatment component and the setTos-Byte attribute is set to yes. This attribute also spe-cifies which bits are examined when TosMap com-ponents are used for IP packet classification. By de-fault, this attribute is set to the value of hex FC tocorrespond to the six bits of the Differentiated Ser-vices Code Point (DSCP) field. The tosMask attrib-ute in all EgressCosTreatment components underthe same CosPolicyGroup must be set to the samevalue. A warning is issued if tosMask is set to any

432


value other than 0xFC. On PQC cards, any othervalue is ignored; in other words, any setting istreated as 0xFC to match the six bits of DSCP fieldin the IP header. On SBIC cards, including the ILSforwarder, ToS field mapping and marking of IPpackets will not exactly match the six bits of theDSCP field. See the description of the tos attributeof the EgressCosTreatment component for more in-formation.

Class NA

Presence required

Visibility customer

Range [1..ff]

Data type Hex

Initial value fc

433


101 InwHostEntryCos (Host)






Parents:

EM - Vr - Ip - Arp - Host

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Arp HostEntry/<Ip Address>,<cos>Rtr/<string> Arp HostEntry/<Ip Address>,<cos> Rtr/<string> Vrf/<string> Arp HostEntry/<Ip Ad-dress>,<cos> This component defines a static hostentry in the ARP table. For Vr, a connection class(cos) value of 0, 1, 2, or 3 is used when the associ-ated mediaType under IpPort is frameRelay, atm-MpeLlcEncap, or atmMpeVcEncap. For other mediatypes, the connection class value is notApplicable(not specified on a per virtual circuit basis). For

434


Router and Vrf, a connection class (cos) value of 0,1, 2, or 3 is used when the media associated withthe interface is AtmMpe or IpoDlci. For other media,the connection class value is notApplicable (notspecified on a per virtual circuit basis).

Class NA

Presence required

Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255],[0, 1, 2, 3, notAp-plicable]

Data Type Ip4Address,Enumeration

Initial Value

encap

Parameter name encap

Domain

Description This attribute specifies the encapsulation type forthe host. The value for this attribute should only bespecified for the hosts on the ethernet media. If avalue of auto is specified, the application based onthe media will determine the proper applicable en-capsulation type.

Class NA

Presence required

Visibility customer

Range ieee8023, ethernet, auto


Initial value auto

maxTxUnit

Parameter name maxTxUnit

Domain

Description Specify the maximum transmit unit (MTU) size thatcan be accepted by the host. If this value is not spe-cified, the value for the media interface is used. Thespecified MTU must be less than or equal to the in-terface's MTU size.

Class NA

435


Presence required

Visibility customer

Range { [80..18944],0 }


Initial value 0

permanentVirtualCircuitNumber

Parameter name permanentVirtualCircuitNumber

Domain

Description This attribute specifies the number of the PVC forthe static host entry. It is the instance number of theX.25 media, Frame Relay media, and of the Atm-Connection component on the ATM MPE interface..

Class NA

Presence required

Visibility customer

Range [0..4095]

Data type Decimal

Initial value 0

physAddress

Parameter name physAddress

Domain

Description This attribute identifies the physical address of thehost being defined. The value for this attributeshould only be specified for media types supportingphysical addresses (e.g. ethernet, fddi, tokenRingetc.)

Class NA

Presence required

Visibility customer

Range [0..8]

Data type DashedHexString

Initial value 00-00-00-00-00-00

tunnelDestinationAddress

Parameter name tunnelDestinationAddress

436


Domain

Description This attribute specifies the IP address of a remoteIP tunnel endpoint in the shared domain. A value of0.0.0.0 is used when the entry is not referring to anIP tunnel.

Class NA

Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]

Data type Ip4Address

Initial value N.A.

437


102 InwIngressCosTreatment (Ict)





• Verbs: add,

Parents:

EM - Vr - Ip - Pg - Ict

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Pg/<string> IngressCosTreatment/nA set of IngressCosTreatment components spe-cifies a mapping between Class of Service (CoS)values and drop precedence values for controllingforwarding behaviors. This mapping is applied topackets received at any IpPort that uses theCosPolicyGroup. See the description of theCosPolicyGroup for more information. Four in-stances of this component, with instance values 0,1, 2, and 3, are created automatically when the

438


CosPolicyGroup component is added.

Class NA

Presence required

Visibility customer

Unit

Range [0..3]

Data Type Decimal

Initial Value

discardPriority

Parameter name discardPriority

Domain

Description This attribute specifies the drop precedence as-signed to an IP packet when the Class of Service(CoS) assigned to the packet is equal to the in-stance value of the IngressCosTreatment compon-ent. Attribute values low, medium, and high indicatethe packet is assigned drop precedence accord-ingly. A value of unchanged indicates the drop pre-cedence assigned to the packet is not modified. Itremains at the value provided by the ingress con-nection. A drop precedence is assigned to a packetto control its loss sensitivity relative to other packetswhen the packets are placed into the same queue.Generally, the low value indicates the packet is lesslikely to be discarded when the queue is congested.This traffic has a higher probability of being forwar-ded. The high value indicates the packet is morelikely to be discarded when the queue is congested.This traffic has a lower probability of being forwar-ded. The actual loss sensitivity of packets dependson the discarding mechanism at the queue. A warn-ing is issued if the discardPriority attribute of one ormore, but not all, of the IngressCosTreatment sub-components the CosPolicyGroup is set to un-changed. Another warning is issued if the dis-cardPriority attribute of two IngressCosTreatmentsubcomponents with the same instance value underany two CosPolicyGroup subcomponents of the VrIp are not equal. This applies only to those In-gressCosTreatment subcomponents where the dis-cardPriority attribute is not set to unchanged. If thisrule is violated, then the Class of Service (CoS) todrop precedence mapping will not be consistent atall IpPorts on the Vr. See the description of theCosPolicyGroup for more information.

439


Class NA

Presence required

Visibility customer

Range unchanged, low, medium, high


Initial value unchanged

440


103 InwIp (Ip)






Parents:

EM - Vr - Ip

Child(ren):

Arp - Bootp - Mcast - Ospf - Pg - Pmm - Rip - Static -

Identifiers:

-

Links:


cosPolicyAssignment Vr Ip Pg

Parameters:

accountCollection


Domain

Description This attribute specifies the reason(s) for which ac-counting data is collected: billing, test, study, auditor force. If the set of reasons is not empty then ac-counting records will be generated by this interfacein the following situations: - on a TODA (time of dayaccounting) changeover, if TODA is enabled - every12 hours per ProtocolPort if TODA is disabled Ifnone of the above reasons are present IP account-ing will be disabled on the VR. Accounting can bedisabled on individual ProtocolPorts by disablingthe attribute accountingControl in Vr ProtocolPort.The reason for collection is recorded in the account-

441


ing records, in the attribute collectReason.

Class NA

Presence optional

Visibility customer


Data type Set of

Initial value

cacheTableSize

Parameter name cacheTableSize

Domain

Description This attribute specifies the maximum number ofentries that can exist in the IP local cache table oneach LP. This attribute provides a way to control theresources allocated to the IP cache tables. For theVR model, the default cache table size is 3000 foran FP and 100 for a CP. For RFC2547 model, thedefault cache table size is 300 for an FP and 100for a CP. The default values are used if this attrib-ute is not specified explicitly. The attribute valuemust be multiple of 100.

Class NA

Presence required

Visibility customer

Range [100..8000]


Initial value N.A.

cosPolicyAssignment

Parameter name cosPolicyAssignment

Domain

Description This attribute specifies the CosPolicyGroup thateach IpPort on the VirtualRouter uses if the cosPoli-cyAssignment attribute of the IpPort is not set. Theassigned CosPolicyGroup controls the forwardingbehavior of IP packets received and transmitted ateach IpPort that use it. See the description of Vr IpCosPolicyGroup for more information. If the Virtual-Router has a DifferentiatedServicesDomain sub-component, then this attribute cannot be set. Theassigned CosPolicyGroup must be a subcomponent

442


of the same Virtual Router.

Class NA

Presence optional

Visibility customer

Range Vr Ip Pg


Initial value N.A.

defaultTtl

Parameter name defaultTtl

Domain

Description This attribute is the default value inserted into theTime-To-Live field of the IP header of datagramsoriginated at this entity, whenever a Time- To-Livevalue is not supplied by the transport layer protocol.The value of this attribute deviates from the MIB re-quirement that it will always have a value of 255.

Class NA

Presence required

Visibility customer

Range [255..255]

Data type Decimal

Initial value 255

ecmpMode

Parameter name ecmpMode

Domain

Description This attribute specifies the Equal Cost Multi Path(ECMP) next hop selection behavior used by theVirtualRouter to distribute the traffic over an IP net-work that has multiple IP equal cost paths to a par-ticular destination. If the value of ecmpMode is setto perFlow, the next hop selection behavior is asfollows: On a PQC and DPQC FP, when hardwareIP forwarding is possible, ECMP next hop selectionand forwarding are performed in hardware. On aPQC FP, the ECMP selection algorithm takes intoconsideration only certain bits of the IP Source Ad-dress and Destination Address. As a result, the per-Flow mode may not provide an effective load distri-bution for hardware forwarding on a PQC FP. On a

443


DPQC FP, the ECMP selection algorithm takes intoconsideration the full IP Source Address and Des-tination Address. As a result, the perFlow modemay provide a more effective load distribution forhardware forwarding on a DPQC FP than on a PQCFP. On a SBIC FP, and on a PQC/DPQC FP (whenhardware IP forwarding is not possible), ECMP nexthop selection and forwarding is performed in soft-ware and the ECMP selection algorithm takes intoconsideration only the lower two significant bytes ofthe IP Source Address and Destination Address. Asa result, the perFlow mode may not provide an ef-fective load distribution for software forwarding on aPQC, DPQC or SBIC FP. If the value of ecmpModeis set to perFlowEnh, the next hop selection behavi-or is as follows: On a PQC, DPQC and SBIC FP, IPforwarding for ECMP routes is always performed insoftware (forwarding for non ECMP routes is not im-pacted). The ECMP selection algorithm considersnot only the full IP Source Address and DestinationAddress but also additional fields of the IP packet.The perFlowEnh mode provides an effective loaddistribution for software forwarding on a PQC,DPQC or SBIC FP. If the value of ecmpMode is setto perPkt, the next hop selection behavior is as fol-lows: On a PQC, DPQC and SBIC FP, IP forward-ing for ECMP routes is always performed in soft-ware (forwarding for non ECMP routes is not im-pacted). Traffic is distributed over the availableECMP next hops in a round-robin fashion on a perpacket basis. The perPkt mode provides the bestload distribution for software forwarding on a PQC,DPQC or SBIC FP, however, this mode can intro-duce mis-ordering since the packets from the sameflow are sent over different next hops. This attributehas no impact on a MS3 based FP where ECMPnext hop selection and IP forwarding are alwaysperformed in hardware and the algorithm in use isthe same as described for the perFlowEnh moderegardless of the value of this attribute.

Class NA

Presence required

Visibility customer

Range perFlow, perFlowEnh, perPkt


Initial value perFlow

444


forwarding

Parameter name forwarding

Domain

Description This attribute indicates whether this VR is acting asan IP gateway in respect to the forwarding of data-grams received by, but not addressed to, this VR.

Class NA

Presence required

Visibility customer

Range gateway


Initial value gateway

lcmCacheMissTrace

Parameter name lcmCacheMissTrace

Domain

Description This attribute indicates whether lcmCa-cheMissTrace is enabled or disabled.

Class NA

Presence required

Visibility customer




preConfigFwdPath

Parameter name preConfigFwdPath

Domain

Description This attribute specifies IP forwarding behavior forthe virtual router. When preConfigFwdPath is set toenabled, all routes present in the ForwardTable arefully installed in hardware on the FPs, eliminatingthe potential outage due to packet software excep-tions for the initial IP flow using an uninstalled route.When this attribute is set to disabled, initial packetsusing a given route are forwarded via software untilthe route is installed in hardware. The disabled set-ting results in the most efficient use of forwardinghardware resources since these resources are onlyused for actual IP flows. Thus the attribute resp-

445


resents a tradeoff between forwarding performanceand scalability of hardware resources.

Class NA

Presence required

Visibility customer




snmpAdminStatus

Parameter name snmpAdminStatus

Domain

Description The desired state of the interface. The up state in-dicates the interface is operational and packet for-warding is allowed. The down state indicates the in-terface is not operational and packet forwarding isunavailable. The testing state indicates that no op-erational packets can be passed.

Class NA

Presence required

Visibility customer



Initial value up

sourceRoute

Parameter name sourceRoute

Domain

Description This attribute indicates whether or not this VR al-lows processing of datagrams which have a sourceroute IP option.

Class NA

Presence required

Visibility customer




446


447


104 InwIpBootpPort (BootpP)






Parents:

EM - Vr - Pp - IpPort - BootpP

Child(ren):

-

Identifiers:

-

Links:


Parameters:

bootpLogicalInterface

Parameter name bootpLogicalInterface

Domain

Description This attribute identifies the logical interface whoseaddress is to be the GIADDR of this BOOTP port. Ifnot set, the address of the first logical port or Inter-face is chosen.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value 0.0.0.0

448


relayAddress

Parameter name relayAddress

Domain

Description This attribute identifies a list of relay addresses.When a BOOTP request message is received onthis port, the request will be forwarded to the IP ad-dresses provisioned in relayAddress. Note thatBOOTP requests are also broadcast out all otherBootpPort's according to the relayForwardStatus ofthe outgoing port.

Class NA

Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]

Data type Variable[3] List of Ip4Address

Initial value N.A.

relayForwardStatus

Parameter name relayForwardStatus

Domain

Description This attribute controls how BOOTP request pack-ets, received on another port, will be flooded outthis port. If relayForwardStatus is enabled, BOOTPrequests received on another port will be broadcastout this port. When relayForwardStatus is disabled,BOOTP requests will not be broadcast out this port.If auto is used, the bridge spanning tree database isused to determine if BOOTP requests should bebroadcast out this port. Note that when using en-abled, it is possible to create misconfigurationswhich will result in broadcast storms. When usingthis feature with multiple routers, make sure thereare no broadcast forwarding loops. Using auto withbridge spanning tree is safer to use if the network isrunning bridge spanning tree. Note that for auto tohave effect, bridge spanning tree must be runningon the corresponding VirtualRouter ProtocolPort orRtr Interface or Rtr Vrf Interface.

Class NA

Presence required

Visibility customer

Range enabled, disabled, auto

449




snmpAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up

450


105 InwIpBootpRelayAgent (Bootp)






Parents:

EM - Vr - Ip - Bootp

Child(ren):

-

Identifiers:

-

Links:


Parameters:

hopDiscardThreshold

Parameter name hopDiscardThreshold

Domain

Description BOOTP packets contain a 'hops' field which is usedto limit the number of relay agents that can processthe packet (each relay agent increments the 'hops'field by one). This attribute is used by the relayagent to determine when to discard a BOOTP pack-et. If the 'hops' field exceeds the hopDiscard-Threshold the BOOTP packet will be discarded.

Class NA

Presence required

Visibility customer

Range [2..16]

451


Data type Decimal

Initial value 4

snmpAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up

452


106 InwIpLogicalIf (LogicalIf)






Parents:

EM - Vr - Pp - IpPort - LogicalIf

Child(ren):

OspfIf - RipIf -

Identifiers:


MaxIn-stances


Links:


linkToPimSmCandid-ateRp • ARtg Pnni CfgNode DefSAd-

dr

•linkToPimSmCandidateB-sr • ARtg Pnni CfgNode DefSAd-

dr

•

Parameters:

rdnId


Domain

Description Vr/<string> PP/<string> IpPort IpLogicalInterface/<IP address> The IpLogicalInterface componentdefines a single IpPort address on a logical IP net-

453


work. In general, IpPort's can have multiple IpLogic-alInterface's. However, if the media type is PPP(Point to Point Protocol), then only one IpLogicalIn-terface is allowed for that IpPort.

Class NA

Presence required

Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255]

Data Type Ip4Address

Initial Value

broadcastAddress

Parameter name broadcastAddress

Domain

Description This attribute specifies the broadcast address forthis IpLogicalInterface. This attribute is ignored ifthe IpPort mediaType is ppp (Point to Point Pro-tocol). If the value is 0.0.0.0, the actual broadcastaddress will be derived from the IP address of thisLogicalIf and the netmask attribute.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

linkDestinationAddress

Parameter name linkDestinationAddress

Domain

Description This attribute specifies the address for the link des-tination for this IpLogicalInterface. This attribute isonly required if the IpPort media type is PPP (Pointto Point Protocol).

Class NA

Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]

454



Initial value N.A.

linkToMediaConnection

Parameter name linkToMediaConnection

Domain

Description This attribute specifies the media connections, Atm-Mpe/m Ac/n or FrDte/m staticDlci/n, that are associ-ated with this component.

Class NA

Presence optional

Visibility customer

Range AtmMpe Ac

Data type Variable[variable] List of ServiceLink

Initial value N.A.

linkToMulticastStaticGroup

Parameter name linkToMulticastStaticGroup

Domain

Description This attribute specifies a link to the componentRouteEntry which uses this LogicalIf as its outInter-face. There is a limit of up to 1000 RouteEntry's thatcould reference this LogicalIf as its outInterface.

Class NA

Presence optional

Visibility customer

Range Vr Ip Rip Export


Initial value N.A.

linkToPimSmCandidateBsr

Parameter name linkToPimSmCandidateBsr

Domain

Description This attribute specifies a link to the CandidateBoot-strapRouter component which uses this logicalIf asit's BootstrapRouter Interface.

Class NA

455


Presence optional

Visibility customer

Range ARtg Pnni CfgNode DefSAddr, RncIn Qaal2PAal2EndPoint


Initial value N.A.

linkToPimSmCandidateRp

Parameter name linkToPimSmCandidateRp

Domain

Description This attribute specifies a link to the CandidateRen-dezvousPoint component which uses this logicalIfas it's RendezvousPoint (CRp).

Class NA

Presence optional

Visibility customer

Range ARtg Pnni CfgNode DefSAddr, RncIn Qaal2PAal2EndPoint


Initial value N.A.

netMask

Parameter name netMask

Domain

Description This attribute specifies the subnet mask for this Ip-LogicalInterface. This attribute must be specifiedbecause the IP application will not automaticallyprovide a default value. The value must be255.255.255.255 if linkModel attribute of IpPortcomponent is set to pointToPoint. For example,when linkToMedia attribute is set to alwaysUpInter-face mode VirtualMedia Interface or PPP (Point toPoint Protocol), linkModel attribute of IpPort com-ponent will be pointToPoint. The value must be oneof classA, classB or classC if the linkModel attributeof ipPort component is set to localAreaNetwork.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]

456



Initial value N.A.

457


107 InwIpMulticast (Mcast)






Parents:

EM - Vr - Ip - Mcast

Child(ren):

Static -

Identifiers:

-

Links:


Parameters:

borderRouterCapability

Parameter name borderRouterCapability

Domain

Description This attributes specifies if this virtual router supportsmulticast border router functionality.

Class NA

Presence required

Visibility customer




458


cacheTableSize

Parameter name cacheTableSize

Domain

Description This attribute specifies the maximum number ofentries supported in the IP multicast cache table oneach Lp. The default is 100 for a CP and 200 for anFP. The value must be multiple of 100 and not morethan 500 for FPs and not more than 200 for theCPs.

Class NA

Presence required

Visibility customer

Range [100..500]


Initial value 100,200,200,200,200,200,200,200,200,200,200,200,200,200,200,200

snmpAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up

459


108 InwIpOspf (Ospf)






Parents:

EM - Vr - Ip - Ospf

Child(ren):

Aggregate - Area - Export - Host - Stub - VirtIf -

Identifiers:

-

Links:


Parameters:

alarmGeneration

Parameter name alarmGeneration

Domain

Description This attribute specifies the level of alarm generationfor this Ospf instance. A value of all specifies thatall OSPF alarms are made visible. A value of nor-mal specifies that all existing OSPF alarms aremade visible, except Ospf NeighborEntry statechange alarms. A value of none specifies that noOSPF alarms are made visible. It is recommendedthat VirtualRouter components with the vpnModeattribute set to carrier should have the alarmGener-ation attribute set to all. VirtualRouter componentswith the vpnMode attribute set to customer shouldhave the alarmGeneration attribute set to either nor-mal or none, for scalability reasons. Similarly, the

460


alarmGeneration attribute should be set to all forRouter. The alarmGeneration attribute should beset to either normal or none for Vrf for scalabilityreasons.

Class NA

Presence required

Visibility customer

Range none, normal, all


Initial value all

asBdrRtrStatus

Parameter name asBdrRtrStatus

Domain

Description This attribute is a flag to note whether this router isan autonomous system border router. If this routeris configured to export any routes learned from oth-er than OSPF-internal protocol, this attribute shouldbe configured as autonomous system border router.

Class NA

Presence required

Visibility customer

Range true, false


Initial value false

attachAsTag

Parameter name attachAsTag

Domain

Description This attribute specifies the treatment of the OSPFtag when routes are redistributed between BGP andOSPF. If this attribute is set to enabled, an AS num-ber is encoded as the OSPF tag when bgpInternal,bgpExternal or bgpMplsInternal routes are redistrib-uted from BGP into OSPF. When these routes areredistributed from OSPF into BGP, the OSPF tag ischecked against the AS number to avoid routingloops. If this attribute is set to disabled, an AS num-ber is not encoded as the OSPF tag when bgpIn-ternal, bgpExternal or bgpMplsInternal routes areredistributed from BGP into OSPF. When these

461


routes are redistributed from OSPF into BGP, theOSPF tag is not checked against the AS number.

Class NA

Presence required

Visibility customer




defaultOspfExt1RtePreference

Parameter name defaultOspfExt1RtePreference

Domain

Description This attribute specifies this OSPF component in-stance's default routing preference assigned to theOSPF external type 1 routes. A lower value indic-ates a more preferred route.

Class NA

Presence required

Visibility customer

Range [1..254]

Data type Decimal

Initial value 80

defaultOspfExt2RtePreference

Parameter name defaultOspfExt2RtePreference

Domain

Description This attribute specifies this OSPF component in-stance's default routing preference assigned to theOSPF external type 2 routes. A lower value indic-ates a more preferred route.

Class NA

Presence required

Visibility customer

Range [1..254]

Data type Decimal

Initial value 120

462


defaultOspfIntRtePreference

Parameter name defaultOspfIntRtePreference

Domain

Description This attribute specifies this OSPF component in-stance's default routing preference assigned to theOSPF internal routes. A lower value indicates amore preferred route.

Class NA

Presence required

Visibility customer

Range [1..254]

Data type Decimal

Initial value 30

ecmpStatus

Parameter name ecmpStatus

Domain

Description This attribute specifies whether the Equal CostMulti-Path (ECMP) functionality is enabled or not inthe network meaning that the number of next hopsfor one route learned through OSPF depend on thevalue of ecmpStatus. If ecmpStatus is enabled, amaximum of three next hops are kept for one route.If it is disabled, one next hop is kept for that route.

Class NA

Presence required

Visibility customer




estimatedNumberOfAreas

Parameter name estimatedNumberOfAreas

Domain

Description This attribute specifies the average estimated num-ber of areas in the autonomous system that thisOSPF instance will have to keep track of.

Class NA

Presence required

463


Visibility customer

Range [0..65535]

Data type Decimal

Initial value 2

estimatedNumberOfExternalOSPFRoutes

Parameter name estimatedNumberOfExternalOSPFRoutes

Domain

Description This attribute specifies the average estimated num-ber of routes external to the autonomous systemthat this OSPF instance will have to keep track of. Ifthis value is provisioned too low it will cause in-creased CPU utilization due to dynamic memory al-location. If this value is provisioned too high the res-ult is wasted memory.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 500

estimatedNumberOfInterfacesPerArea

Parameter name estimatedNumberOfInterfacesPerArea

Domain

Description This attribute specifies the average estimated num-ber of interfaces in a given area that this OSPF in-stance will have to keep track of.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 10

estimatedNumberOfInternalOSPFRoutes

Parameter name estimatedNumberOfInternalOSPFRoutes

464


Domain

Description This attribute specifies the average estimated num-ber of routes in the autonomous system that thisOSPF instance will have to keep track of. If thisvalue is provisioned too low it will cause increasedCPU utilization due to dynamic memory allocation.If this value is provisioned too high the result iswasted memory.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 500

estimatedNumberOfNeighborsPerInterface

Parameter name estimatedNumberOfNeighborsPerInterface

Domain

Description This attribute specifies the average estimated num-ber of neighbors that a given interface will have onit in this OSPF interface.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 3

generateDefaultRouteMetric

Parameter name generateDefaultRouteMetric

Domain

Description If this router is configured as an autonomous sys-tem border router, then this attribute causes the de-fault route to be generated with a metric value equalto generateDefaultRouteMetric value. This route isput in the OSPF update along with the normal up-date routes when updates are sent to the neigh-bors. No default route will be generated if the valueis 0.

Class NA

465


Presence required

Visibility customer

Range [-1..65535]

Data type Signed

Initial value 0

migrateRip

Parameter name migrateRip

Domain

Description This Attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. Thisattribute should only be used when starting a migra-tion of a network from RIP to OSPF. When ready tocut over to OSPF, set this attribute to a value of dis-abled and run under normal preferences. All OSPFrouters in the Autonomous System should be run-ning with the migrateRip attribute set to a value ofenabled or with migrateRip disabled to prevent rout-ing loops. It is important that the changeover periodfrom RIP to OSPF be performed quickly on all OS-PF routers so that no routing loops are formed.These routing loops could be caused by conflicts inthe internal RIP and OSPF databases.

Class NA

Presence required

Visibility customer




multicastForward

Parameter name multicastForward

Domain

Description A bit mask indicating the limits on Network LayerMulticast (class D) forwarding. It is represented as asum of the following: if intra-Area forwarding is per-mitted, 1; else 0 if inter-Area forwarding is permitted2; else 0 if inter-AS forwarding is permitted, 4; else0 Only the value of 0 is being supported and this isa MIB deviation.

Class NA

466


Presence required

Visibility customer

Range [0..0]

Data type Decimal

Initial value 0

opaqueCapability

Parameter name opaqueCapability

Domain

Description This attribute specifies whether the OSPF instanceis allowed to participate in flooding Opaque LSAs.Such LSAs are also stored in the InwOspfLsd-bEntry. Applications, such as MPLS Traffic Engin-eering, use this mechanism to flood their informa-tion throughout a network. Of the three OpaqueLSA types (9,10,11), only type 10 LSAs (areascope) are supported.The OSPF instance remainsfully inter-operable with non-opaque-capable neigh-bors. Opaque capability is not fully supported.When the mplsTeEmulation feature is provisioned,setting this attribute to true activates hooks to emu-late TE capability by flooding hard- coded type 10TE LSAs to opaque-capable neighbors. This emu-lated TE functionality is not standards compliantand is strictly provided for MPLS RSVP-TE inter-operability with vendors that are dependent onMPLS TE to establish LSPs.

Class NA

Presence required

Visibility customer

Range true, false


Initial value false

redistributeIbgp

Parameter name redistributeIbgp

Domain

Description This attribute specifies whether the export policiesof this Ospf instance can match routes learned frominternal BGP (IBGP) peers when their protocol at-tribute value is all. If redistributeIbgp is true, a pro-

467


tocol value of all allows routes learned from IBGPpeers to be included in the matching routes. If redis-tributeIbgp is false, routes learned from IBGP peersare excluded when the protocol value is all. Tocause IBGP routes to be considered in this case,the protocol value must be set to bgpInternal.

Class NA

Presence required

Visibility customer

Range true, false


Initial value false

routerId

Parameter name routerId

Domain

Description This attribute is an Ip Address that uniquely identi-fies the router in the autonomous system.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

snmpAdminStatus


Domain

Description The administrative status of the OSPF Componentin this routing component (Vr, Rtr or Vrf).

Class NA

Presence required

Visibility customer



Initial value up

468


spareInstance

Parameter name spareInstance

Domain

Description This attribute specifies whether to maintain a copyof the link state database on the standby card.When this attribute is set to disable, OSPF does notmaintain a copy of the link state database. If the vir-tualRouterProcessor attribute of this VirtualRouteris set to Lp/0, then the following conditions mustboth be true for a copy of the link-state database tobe maintained on the standby CP: - This attributemust be set to enable, and - The Shelf cpEquip-mentProtection attribute must be set to hot.

Class NA

Presence required

Visibility customer

Range enable, disable



spfHoldTime

Parameter name spfHoldTime

Domain

Description This attribute specifies the minimum time intervalbetween SPF calculations. If a link state change inthe autonomous system is detected and the timesince the last SPF calculation is greater than spf-HoldTime, then the SPF calculation starts immedi-ately. Otherwise, the SPF calculation waits until atime of at least spfHoldTime has elapsed since theprevious SPF calculation. Setting this attribute to alower value decreases convergence time in the OS-PF autonomous system, but uses more CPU re-source more frequently. Setting this attribute to ahigher value increases convergence time butprovides for a more scalable node configuration, es-pecially if there are many Ospf components con-figured on the node.

Class NA

Presence required

Visibility customer

Range [1..60]

Data type Decimal

469


Initial value 1

tosSupport

Parameter name tosSupport

Domain

Description The router's support for type-of-service routing.Only one value will be allowed. This is a deviationfrom supporting the MIB.

Class NA

Presence required

Visibility customer

Range false


Initial value false

470


109 InwIpPmm (Pmm)






Parents:

EM - Vr - Ip - Pmm

Child(ren):

-

Identifiers:

-

Links:


Parameters:

ipAddress

Parameter name ipAddress

Domain

Description This attribute specifies the IP address of the inter-face to be used by the Pmm for its communicationwith the corresponding PKI counterpart, the proxyCA or CA. The value of the ipAddress attribute isthe management interface on the associated VRcomponent.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


471


Initial value N.A.

linkToVspPkiClient

Parameter name linkToVspPkiClient

Domain

Description This attribute specifies the list of VspPkiClient com-ponent instances requiring use of the Pmm com-ponent.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Variable[12] List of ComponentName

Initial value N.A.

472


110 InwIpPort (IpPort)






Parents:

EM - Vr - Pp - IpPort

Child(ren):

BootpP - LogicalIf -

Identifiers:

-

Links:


cosPolicyAssignment Vr Ip Pg

Parameters:

allowMcastMacDest

Parameter name allowMcastMacDest

Domain

Description This attribute specifies whether a multicast destina-tion MAC address is valid on this IpPort or not. Set-ting this attribute to enabled results in non-standardbehavior and is intended for applications such astransparent server backup. Multicast destinationMAC address is only supported on LAN media.

Class NA

Presence required

Visibility customer


473




arpNoLearn

Parameter name arpNoLearn

Domain

Description This attribute specifies whether or not dynamic hostentries will be installed in the ARP table when ARPpackets are received on this IpPort.

Class NA

Presence required

Visibility customer




arpStatus

Parameter name arpStatus

Domain

Description This attribute specifies whether ARP is enabled ordisabled on this IpPort. If auto is specified, an ap-propriate value will be selected based on the IpPortmedia type.

Class NA

Presence required

Visibility customer



Initial value auto

cosPolicyAssignment

Parameter name cosPolicyAssignment

Domain

Description This attribute specifies the CosPolicyGroup the Ip-Port is using. If this attribute is not set, then thecosPolicyAssignment attribute of the Ip specifiesthe CosPolicyGroup in use. The assigned CosPoli-

474


cyGroup controls the forwarding behavior of IPpackets recieved and transmitted at the IpPort. Seethe description of Vr Ip CosPolicyGroup for more in-formation. If the VirtualRouter has a Differentiated-ServicesDomain subcomponent, then this attributecannot be set. The assigned CosPolicyGroup mustbe a subcomponent of the same VirtualRouter.

Class NA

Presence optional

Visibility customer

Range Vr Ip Pg


Initial value N.A.

directedBroadcast

Parameter name directedBroadcast

Domain

Description This attribute specifies whether or not directedbroadcast to physical broadcast translation is en-abled for incoming traffic on this IpPort. The IProuter requirement (RFC1812) says this translationshould be enabled; however, in some network en-vironments, setting this attribute to disabled mayprevent operational problem such as broadcaststorms. Note that in some configuration, setting thisattribute to disabled may cause Bootp to fail.

Class NA

Presence required

Visibility customer




encap

Parameter name encap

Domain

Description This attribute specifies the encapsulation type to beused when sending packets out this IpPort. If autois specified, an appropriate value is selected basedon the IpPort media type. The values ieee8023 andethernet can only be specified if the media type is

475


ethernet. Otherwise, auto must be specified. Forethernet media type, the default encapsulation isethernet.

Class NA

Presence required

Visibility customer

Range ieee8023, ethernet, auto


Initial value auto

icmpMaskReply

Parameter name icmpMaskReply

Domain

Description This attribute specifies whether or not replies will begenerated in response to ICMP Address Mask Re-quests received on this IpPort.

Class NA

Presence required

Visibility customer




ipCos

Parameter name ipCos

Domain

Description This attribute specifies the IP connection classvalue of the link layer connection used by the IpPortif the media linked to the ProtocolPort is not Atm-Mpe, FrDte or IpDlciGroup. If the VirtualRouterdoes not have a DifferentiatedServicesDomain sub-component, then ipCos specifies the initial Class ofService (CoS) value assigned to an IP packet re-ceived at the IpPort if the media linked to the Proto-colPort is not AtmMpe, FrDte or IpDlciGroup. Seethe description of Vr Ip CosPolicyGroup for more in-formation.

Class NA

Presence required

476


Visibility customer

Range [0..3]

Data type Decimal

Initial value 0

lanModel

Parameter name lanModel

Domain

Description This attribute specifies the lan model to use for thisIpPort.

Class NA

Presence required

Visibility customer

Range localAreaNetwork, nonBroadcastMultipleAccess


Initial value localAreaNetwork

linkModel

Parameter name linkModel

Domain

Description This attribute specifies the link model to use whenthe media type for this IpPort is PPP (Point to PointProtocol). A value of localAreaNetwork causes IP totreat this IpPort like a LAN. A value of pointToPointcauses IP to treat this IpPort like two directly con-nected IP hosts.

Class NA

Presence required

Visibility customer

Range localAreaNetwork, pointToPoint


Initial value localAreaNetwork

maxTxUnit

Parameter name maxTxUnit

Domain

Description This attribute specifies the IP MTU (Maximum

477


Transmission Unit) supported by this IpPort. Thespecified MTU must be within the valid range for theIpPort media type.

Class NA

Presence required

Visibility customer

Range { [80..18944],0 }


Initial value 0

mcastDomain

Parameter name mcastDomain

Domain

Description This attribute specifies the multicast domain indexwhich all traffic coming in from this IpPort use. Thenumerical value of this attribute selects Vr/<string>Ip Mcast Domain/n.

Class NA

Presence required

Visibility customer

Range [0..3]

Data type Decimal

Initial value 0

multicastStatus

Parameter name multicastStatus

Domain

Description This attribute specifies whether or not IP multicastpackets can be sent out this IpPort. If auto is spe-cified, an appropriate value will be selected basedon the IpPort media type.

Class NA

Presence required

Visibility customer



Initial value auto

478


proxyArpStatus

Parameter name proxyArpStatus

Domain

Description This attribute specifies whether Proxy ARP is en-abled or disabled for this IpPort.

Class NA

Presence required

Visibility customer




relayAddress

Parameter name relayAddress

Domain

Description This attribute specifies a relay broadcast addressfor this IpPort. Each packet, received on this IpPort,meeting the relay broadcast criteria will be forwar-ded to the specified relay broadcast address. An re-lay address of all zero's indicates no relay broad-cast address.

Class NA

Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

relayBroadcast

Parameter name relayBroadcast

Domain

Description This attribute specifies how packets, received onother IpPorts, meeting the relay broadcast criteria,will be forwarded out this IpPort. The three optionsare described as follows: enabled: packets will beforwarded out this IpPort. disabled: packets will notbe forwarded out this IpPort. auto: packets will beforwarded out this IpPort only when the bridge state

479


is forwarding.

Class NA

Presence required

Visibility customer




sendRedirect

Parameter name sendRedirect

Domain

Description This attribute specifies whether or not ICMP hostredirects will be sent out this IpPort.

Class NA

Presence required

Visibility customer




snmpAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up

sourceRouteEndStationSupport

480


Parameter name sourceRouteEndStationSupport

Domain

Description This attribute is used to enable or disable supportfor SourceRouteEndStation (Sres). If set to enable,Sres will be supported on this protocol on this Pro-tocolPort (Pp). If set to disable, it will not be suppor-ted. An Sres component must be provisioned underthe VirtualRouter if this attribute is set to enable. Ifthis attribute is set to enable and this Pp has its link-ToMedia attribute set, it must be linked to a LanAp-plication (La) that has its Framer interfaceNamelinked to a Fddi or TokenRing component.

Class NA

Presence required

Visibility customer

Range enable, disable



481


111 InwIpRip (Rip)






Parents:

EM - Vr - Ip - Rip

Child(ren):

Export - Import -

Identifiers:

-

Links:


Parameters:

defaultRipRtePreference

Parameter name defaultRipRtePreference

Domain

Description This attribute specifies this RIP component in-stance's default routing preference assigned to theRIP routes. A lower value indicates a more pre-ferred route.

Class NA

Presence required

Visibility customer

Range [1..254]

Data type Decimal

Initial value 82

482


generateDiscardRoute

Parameter name generateDiscardRoute

Domain

Description This attribute specifies whether network discardroutes should be added to the routing and forward-ing table for the subnetted interfaces that are run-ning RIP.

Class NA

Presence required

Visibility customer

Range yes, no


Initial value yes

migrateRip

Parameter name migrateRip

Domain

Description This attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. Note:This parameter should only be used when startingmigration of network from RIP to OSPF. Whenready to cut over to OSPF, set this attribute value todisabled and run under normal preferences. All OS-PF routers in the Autonomous System should berunning with migrateRip enabled or with migrateRipdisabled to prevent routing loops. It is important thatthe changeover period from RIP to OSPF be per-formed quickly on all OSPF routers so that no rout-ing loops are formed. These routing loops could becaused by conflicts in the internal RIP and OSPFdatabases.

Class NA

Presence required

Visibility customer




redistributeIbgp

483


Parameter name redistributeIbgp

Domain

Description This attribute specifies whether the export policiesof this Rip instance can match routes learned frominternal BGP (IBGP) peers when their protocol at-tribute value is all. If redistributeIbgp is true, a pro-tocol value of all allows routes learned from IBGPpeers to be included in the matching routes. If redis-tributeIbgp is false, routes learned from IBGP peersare excluded when the protocol value is all. Tocause IBGP routes to be considered in this case,the protocol value must be set to bgpInternal.

Class NA

Presence required

Visibility customer

Range true, false


Initial value false

rfc1058MetricUsage

Parameter name rfc1058MetricUsage

Domain

Description This attribute determines the metric usage for thisRIP instance. This flag is used to determine the waymetrics are incremented. RFC 1058 way: SendingUpdate: This is to use the metric for the route fromthe routing table as the advertised metric to be sentfor that route. Nothing is ever added to this valuefrom the sending side. The only special case hand-ling is that if the route being advertised is the net-work route of a directly connected network, the met-ric in the routing table will be zero. Then the RipIfinterface metric for the interface being advertised isused as the advertise metric. If the interface beingadvertised is not a Rip interface, then metric valueof 1 is used. Receiving Update: Add receiving inter-face's RIP metric to the metric for the route in thereceived advertisement and install the result in thereceiver's routing table as the metric for that route.Older way: Sending Updates: Add the out going in-terfaces rip metric to the metric for a route in therouting table to form the metric to be advertised forthat route. Receiving Updates: The metric receivedin the advertisement for a route is put directly in therouting table as the metric for that route. Note: It is

484


recommended that, all the routers in this autonom-ous system should be following the rfc1058 metricsystem. Setting this flag to disabled will have the ef-fect of running the RIP with old metric incrementingsystem.

Class NA

Presence required

Visibility customer




snmpAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up

485


112 InwIpRipIf (RipIf)






Parents:

EM - Vr - Pp - IpPort - LogicalIf - RipIf

Child(ren):

Nbr -

Identifiers:

-

Links:


Parameters:

acceptDefault

Parameter name acceptDefault

Domain

Description If this attribute is set to true, then accept the defaultroute from this interface.

Class NA

Presence required

Visibility customer

Range true, false


Initial value true

486


defaultRouteMetric

Parameter name defaultRouteMetric

Domain

Description This attribute identifies the metric value for the de-fault route. This value is only used if the attributenetworkRouteStatus is configured with a value ofeither naturalNetWithDefaultRoute or defaultRou-teOnly

Class NA

Presence required

Visibility customer

Range [1..16]

Data type Decimal

Initial value 1

flashUpdateFlag

Parameter name flashUpdateFlag

Domain

Description This attribute when set to true will send updateswhen updates are received; otherwise RIP will waittill the next update period.

Class NA

Presence required

Visibility customer

Range true, false


Initial value true

ifConfReceive

Parameter name ifConfReceive

Domain

Description This attribute identifies which version of RIP up-dates are to be accepted on this RipIf. Note thatrip2 and rip1OrRip2 implies reception of multicastpackets.

Class NA

Presence required

Visibility customer

487


Range rip1, rip2, rip1OrRip2, doNotReceive


Initial value rip1OrRip2

ifConfSend

Parameter name ifConfSend

Domain

Description This attribute identifies what the router sends onthis RipIf. ripVersion1 implies sending RIP updatescompliant with RFC 1058. rip1Compatible impliesbroadcasting RIP-2 updates according to RFC1058. ripVersion2 implies multicasting RIP-2 up-dates.

Class NA

Presence required

Visibility customer

Range doNotSend, ripVersion1, rip1Compatible, ripVer-sion2


Initial value rip1Compatible

metric

Parameter name metric

Domain

Description This attribute is the RIP metric for this logical inter-face.

Class NA

Presence required

Visibility customer

Range [1..16]

Data type Decimal

Initial value 1

networkRouteStatus

Parameter name networkRouteStatus

Domain

Description This attribute determines what type of network

488


routes will be sent and whether a default route willbe generated for this RipInterface. Generated de-fault routes will not go into the routing table, but aresent in the updates going out on the interface. Thepossible values for this attribute are: naturalNet-WithOutDefaultRoute - This value will cause normalRIP network routes to be put in the update. Thismeans that the address of logicalIf or Interface per-taining to this RipInterface knowledge is taken intoaccount in determining if the subnetted network orthe natural network is sent for any route going intothis update. naturalNetWithDefaultRoute - Selectingthis value will cause a default route to be generatedwith the value of the metric selected for the attributedefaultRouteMetric. defaultRouteOnly - Selection ofthis value causes the default route to be generatedwith the value of the metric selected for the attributedefaultRouteMetric. NOTE: No other routes will goin the update. subnetsOnly - selection of this valuewill cause only subnet information to be put in theupdate. No default routes will be generated orpassed on. Only subnetted routes that are part ofthe same subnetted network that this logicalInter-face or Interface is on will be put in the update.NOTE: this also effects receiving of updates on thisinterface. Only subnetted routes that are part of thesame subnetted network that this logicalInterface orInterface is on will be accepted on a received RIPupdate on this RipInterface.

Class NA

Presence required

Visibility customer

Range naturalNetWithOutDefaultRoute, naturalNetWithDe-faultRoute, defaultRouteOnly, subnetsOnly


Initial value naturalNetWithOutDefaultRoute

poisonReverseFlag

Parameter name poisonReverseFlag

Domain

Description If the value of this attribute is set to true, then pois-on reverse algorithm is used when sending out theupdates otherwise use split horizon only.

Class NA

Presence required

489


Visibility customer

Range true, false


Initial value false

snmpAdminStatus


Domain

Description Identifies the administrative status of this RipInter-face. Setting this value to disabled will have the ef-fect of rendering it inactive.

Class NA

Presence required

Visibility customer

Range up, down


Initial value up

490


113 InwIpRipIfNeighbor (Nbr)






Parents:

EM - Vr - Pp - IpPort - LogicalIf - RipIf - Nbr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Pp/<string> IpPort logicalIf/<Ip Ad-dress> RipIf Neighbor/<Ip address> Rtr/<string> In-terface/<Ip Address> RipIf Neighbor/<Ip address>Rtr/<string> Vrf/<string> Interface/<Ip Address>RipIf Neighbor/<Ip address> This component isused to configure the Ip Address of the non broad-cast multi access (NBMA) neighbor.

Class NA

Presence required

491


Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255]


Initial Value

492


114 InwIpRouteNextHop (Nh)






Parents:

EM - Vr - Ip - Static - Route - Nh

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Static Route/<Ip Address>,<Ip Ad-dress>,<Decimal> NextHop/<Ip Address> Rtr/<string> Static Route/<Ip Address>,<Ip Ad-dress>,<Decimal> NextHop/<Ip Address> Rtr/<string> Vrf/<string> Static Route/<Ip Address>,<IpAddress>,<Decimal> NextHop/<Ip Address> Thiscomponent provides the destination Ip address ofthe NextHop (some times referred to as the Gate-way). For a RouteEntry to be valid, there should beat least one NextHop provisioned. Up to three

493


NextHops can be provisioned for each instance of aRouteEntry. Each provisioned NextHop addressshould belong to a valid subnet. A valid subnet forthis IP entity can be provisioned as a logicalIf Entryunder an IpPort.

Class NA

Presence required

Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255]


Initial Value

metric


Domain

Description This attribute specifies the primary routing metric forthis NextHop.

Class NA

Presence required

Visibility customer

Range [-1..65535]

Data type Signed

Initial value 1

494


115 InwIpStatic (Static)






Parents:

EM - Vr - Ip - Static

Child(ren):

Route -

Identifiers:

-

Links:


Parameters:

defaultStaticDiscardRtePreference

Parameter name defaultStaticDiscardRtePreference

Domain

Description This attribute specifies this Static component in-stance's default routing preference assigned to thediscard routes. A lower value indicates a more pre-ferred route. Assigning a non-zero value to the stat-icDiscardRtePreference attribute in Dis-cardRouteEntry will override this default.

Class NA

Presence required

Visibility customer

Range [0..253]

Data type Decimal

495


Initial value 0

defaultStaticRemoteRtePreference

Parameter name defaultStaticRemoteRtePreference

Domain

Description This attribute specifies this Static component in-stance's default routing preference assigned to theremote routes. A lower value indicates a more pre-ferred route. Assigning a non-zero value to thestaticRemoteRtePreference attribute in RouteEntrywill override this default.

Class NA

Presence required

Visibility customer

Range [1..253]

Data type Decimal

Initial value 72

heartbeatDeadInterval

Parameter name heartbeatDeadInterval

Domain

Description This attribute specifies the L3 Static heartbeat deadrouter interval for the NextHop Routers of StaticRoutes which have heartbeat enabled. If no heart-beat polling responses have been received in thelast heartbeatDeadInterval seconds, then the heart-beatState of this NextHop is down. If heartbeat-DeadInterval is disabled, L3 heartbeat monitoringwill not occur for any Static Route NextHops andthe heartbeatState of all NextHops will be disabled.

Class NA

Presence required

Visibility customer




maxEcmpNextHops

Parameter name maxEcmpNextHops

496


Domain

Description This attribute specifies the maximum number ofEqual Cost Multi-Path (ECMP) NextHops that aresupported for Static RouteEntrys. If max-EcmpNextHops is 1 then only a single availableNextHop is used, even if multiple NextHops are pro-visioned with the same metric value under a givenStatic RouteEntry. In other words ECMP is disabledfor static routes. If maxEcmpNextHops is 3 thetraffic will be loadshared over the availableNextHops that have the same value set for the met-ric attribute under a given Static RouteEntry. Whenprotected Static RouteEntrys are provisioned, max-EcmpNextHops must be 1.

Class NA

Presence required

Visibility customer

Range 1, 3


Initial value 3

497


116 InwIpStaticRouteEntry (Route)






Parents:

EM - Vr - Ip - Static - Route

Child(ren):

Nh -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Static RouteEntry/<Ip Address>, <IpAddress>, <Decimal> Rtr/<string> StaticRouteEntry/<Ip Address>, <Ip Address>,<Decimal> Rtr/<string> Vrf/<string> StaticRouteEntry/<Ip Address>, <Ip Address>,<Decimal> This component describes the IP staticroutes. For a RouteEntry to be valid, there shouldbe at least one NextHop provisioned. Up to threeNextHops can be provisioned for each instance of aRouteEntry. The value of index destMask should be

498


contiguous. Only the value zero is supported. Zerowill be substituted for any value that is entered.

Class NA

Presence required

Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255],[0..255].[0..255].[0..255].[0..255],[0..0]

Data Type Ip4Address,Ip4Address,Decimal

Initial Value

heartbeat

Parameter name heartbeat

Domain

Description This attribute specifies whether or not heartbeat isenabled for this route. In order for this attribute tohave any effect, heartbeat must first be permitted atthe Static component level by configuring the heart-beatDeadInterval to a value different than disabled.If enabled is specified for heartbeat, an IP heartbeatis maintained for each of the NextHops. ICMP echorequests are sent every 1second and if an ICMPecho resply is received, the heartbeatState of theNextHop is declared up. If at any point no ICMP re-sponse has been received for heartbeatDeadInter-val seconds, the heartbeatState of the NextHop willbe down. If disabled is specified, the heartbeatStateof each NextHop under this Static Route will be dis-abled.

Class NA

Presence required

Visibility customer




protected

Parameter name protected

Domain

Description This attribute specifies whether this route is protec-

499


ted or not. Note that Vr Ip Static max-EcmpNextHops must be 1 and Vr Ip Ospf ecmp-Status must be disabled when there is a protectedstatic route under the Vr.

Class NA

Presence required

Visibility customer

Range yes, no


Initial value no

protectedFailureBehavior

Parameter name protectedFailureBehavior

Domain

Description This attribute specifies the behavior when allNextHops of a protected static route fail. If discardis specified, the static route will not be removed, itwill continue to be used to discard traffic.

Class NA

Presence required

Visibility customer

Range discard


Initial value discard

staticRemoteRtePreference

Parameter name staticRemoteRtePreference

Domain

Description This attribute specifies the route preference of thestatic remote route. A lower preference valuemeans the route is more preferred. If sameAsStaticis specified, the value of defaultStaticRemoteRte-Preference in the Static component is used.

Class NA

Presence required

Visibility customer

Range { [1..253],sameAsStatic }


500


Initial value sameAsStatic

501


117 InwLanApplication (La)






Parents:

EM - La

Child(ren):

Framer - Policy - Vlan -

Identifiers:


MaxIn-stances


Links:



bridgePortLink Vr Pp

Parameters:

rdnId


Domain

Description LanApplication/n The LanApplication componentrepresents a single Ethernet interface on the node.The Framer subcomponent, is used to specifyeither a single Ethernet port, such as Lp Ethernet,or an aggregation of Ethernet ports, represented bythe LinkAggregation, component. The LanApplica-tion can be configured to operate in either LAN-

502


mode or VLAN-mode. To configure the Ethernet in-terface in LAN-mode, no Vlan subcomponent maybe configured for this La instance, and no Dynam-icVlan component may exist for this La instance.The LanApplication component can provide the Eth-ernet interface for either a VirtualRouter Protocol-Port, an EthernetVirtualConnection component, aRouter, a Router VirtualRouteForwarder, an Ether-netTrunk component, or a VirtualBridge.

Class NA

Presence required

Visibility customer

Unit

Range [0..255]

Data Type Decimal

Initial Value

bridgePortLink

Parameter name bridgePortLink

Domain

Description This attribute specifies the BridgePort component towhich the application is associated. This attributemust not be set if there is an EthernetVirtual-LineService or an EthernetTrunk subcomponent un-der this LanApplication component or if either thelinkToProtocolPort attribute is set or the enetCon-nection attribute is set.

Class NA

Presence optional

Visibility customer

Range Vr Pp


Initial value N.A.

correlationTag


Domain

Description This attribute specifies a unique string, set by theoperator, which identifies the connection. Normally,this value is provisioned with the same value at

503


each end of the connection.

Class NA

Presence required

Visibility customer

Range [0..64]


Initial value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

ifAdminStatus


Domain

Description The desired state of the interface. The up state in-dicates the interface is operational. The down stateindicates the interface is not operational. The test-

504


ing state indicates that no operational packets canbe passed.

Class NA

Presence required

Visibility customer



Initial value up

linkToProtocolPort


Domain

Description This attribute specifies the ProtocolPort componentto which the application is associated. This attributemust not be set if there is an EthernetVirtual-LineService subcomponent under this LanApplica-tion component or the enetConnection attribute isset.

Class NA

Presence optional

Visibility customer

Range Vr Pp


Initial value N.A.

statisticsSpooling


Domain

Description This attribute specifies whether the Ethernet statist-ics spooling is enabled or disabled.

Class NA

Presence required

Visibility customer




505


506


118 InwLocalMediaInterface (If)






Parents:

EM - LocalMedia - If

Child(ren):

-

Identifiers:


MaxIn-stances


Links:



Parameters:

rdnId


Domain

Description LocalMedia Interface/n This component representsa logical interface to the LocalMedia component.The Interface component has to be linked to a Virtu-alRouter ProtocolPort component which has onlyone LogicalInterface subcomponent.

Class NA

Presence required

507


Visibility customer

Unit

Range [0..31]

Data Type Decimal

Initial Value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

linkToProtocolPort


Domain

Description This attribute specifies the ProtocolPort to whichthis interface is linked to. The protocol port is the lo-gical interface to the network. The protocol portcomponent describes the logical characteristics ofthis interface.

508


Class NA

Presence required

Visibility customer

Range Vr Pp


Initial value N.A.

maxTransmissionUnit

Parameter name maxTransmissionUnit

Domain

Description This attribute specifies the size of the largest data-gram which can be sent on the interface. This in-cludes the size of the header (if applicable) as wellas the protocol data unit.

Class NA

Presence required

Visibility customer

Range [256..9180]

Data type Decimal

Initial value 9180

trafficType

Parameter name trafficType

Domain

Description This attribute specifies the supported traffic types ofthe LocalMedia If component. It contains one ormore of the following values: Rnc, internalTraffic,locationServices, oamTraffic, multicast, cellBroad-castServices, iubUplane, iubUplaneInternal orss7Cplane. Rnc: This traffic type supports all typesof traffic in RNC-IN. internalTraffic: This traffic typesupports movable IP and PsfpIpServer feature. loc-ationServices: This traffic type supports AGPS fea-ture. oamTraffic: This traffic type supports OAM re-lated traffic, such as communication between OMCand OMUs. multicast: This traffic type supportstraffic destined to multicast group. cellBroadcast-Services: This traffic type supports traffic betweenCellBroadcastServicesAgent and the external Cell-BroadcastCenter. iubUplane: This traffic type sup-ports Iub User Plane traffic between RNC and Node

509


B. The IP addresses associated with this traffic typeare regular public IP addresses. iubUplaneInternal:This traffic type supports Iub User Plane traffic seg-ment that is internal to RNC. The IP addresses as-sociated with this traffic type are loopback IP ad-dresses used internally only. ss7Cplane: This traffictype supports the Iu Control Plane traffic betweenRNC and Core Network, the Iur Control Plane trafficbetween SRNC and DRNC. The IP addresses as-sociated with this traffic type are regular public IPaddresses. reserved1: This traffic type is reservedfor future use. reserved2: This traffic type is re-served for future use. reserved3: This traffic type isreserved for future use. reserved4: This traffic typeis reserved for future use.

Class NA

Presence required

Visibility customer

Range rnc, internalTraffic, locationServices, oamTraffic,multicast, cellBroadcastServices, iubUplane, iubU-planeInternal, ss7Cplane, reserved1, reserved2, re-served3, reserved4

Data type Set of

Initial value

510


119 InwMemoryManagement (Mm)





Parents:

EM - Vr - Mm

Child(ren):

-

Identifiers:

-

Links:


Parameters:

vrMaxHeapSpace

Parameter name vrMaxHeapSpace

Domain

Description This attribute specifies the maximum percentage ofthe total system heap space that is allowed for useby this VirtualRouter, Router, or VpnRouteForward-er. Attempted memory allocation beyond this limitwill cause a VirtualRouter or VpnRouteForwarder toautomatically lock. If memory allocation for a Routerexceeds this limit, an alarm is raised but the com-ponent is not locked.

Class NA

Presence required

Visibility customer

Range [0..100]

Data type Decimal

511


Initial value 100

512


120 InwMultiLocalMedia (LocalMedia)






Parents:

EM - LocalMedia

Child(ren):

If -

Identifiers:

-

Links:


Parameters:

513


121 InwOspfAreaAggregateEntry (Aggregate)






Parents:

EM - Vr - Ip - Ospf - Aggregate

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Ospf AreaAggregateEntry/<Ip Ad-dress>,<enum>, <Ip Address>,<Ip Address> Rtr/<string> Ospf AreaAggregateEntry/<Ip Ad-dress>,<enum>, <Ip Address>,<Ip Address> Rtr/<string> Vrf/<string> Ospf AreaAggregateEntry/<IpAddress>,<enum>,<Ip Address>,<Ip Address> Thistable entry replaces the Area Summary table fromRFC1253 and is used as an extension for CIDRsupport.

Class NA

514


Presence required

Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255],[summaryLink, ns-saExtern-alLink],[0..255].[0..255].[0..255].[0..255],[0..255].[0..255].[0..255].[0..255]

Data Type Ip4Address,Enumeration,Ip4Address,Ip4Address

Initial Value

effect

Parameter name effect

Domain

Description This attribute determines whether or not the routinginformation will be advertised, depending on othercriterion. Setting this value to doNotAdvertiseMatch-ing can prevent advertising routing information forthe address and mask values specified as the in-dices for this entry.

Class NA

Presence required

Visibility customer

Range advertiseMatching, doNotAdvertiseMatching, invalid


Initial value advertiseMatching

515


122 InwOspfAreaEntry (Area)






Parents:

EM - Vr - Ip - Ospf - Area

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Ospf AreaEntry/<Ip Address> Rtr/<string> Ospf AreaEntry/<Ip Address> Rtr/<string>Vrf/<string> Ospf AreaEntry/<Ip Address> Thiscomponent contains the information about variousareas that the router is connected to.

Class NA

Presence required

Visibility customer

516


Unit

Range [0..255].[0..255].[0..255].[0..255]


Initial Value

areaSummary

Parameter name areaSummary

Domain

Description This variable controls the import of summary LSAsinto stub areas. If it is noAreaSummary, the routerwill neither originate nor propagate summary LSAsinto the stub areas. It will rely entirely on its defaultroute. If it is sendAreaSummary, the router will bothsummarize and propagate summary LSAs.

Class NA

Presence required

Visibility customer

Range noAreaSummary, sendAreaSummary


Initial value noAreaSummary

authType

Parameter name authType

Domain

Description The authentication type specified for this area.

Class NA

Presence required

Visibility customer

Range none, simplePassword, md5


Initial value none

importAsExtern

Parameter name importAsExtern

Domain

Description The area's support for importing AS external link-state advertisements. For backbone area (that is,

517


areaId 0.0.0.0), this attribute must be set to impor-tExternal.

Class NA

Presence required

Visibility customer

Range importExternal, importNoExternal, importNssa


Initial value importExternal

518


123 InwOspfExport (Export)






Parents:

EM - Vr - Ip - Ospf - Export

Child(ren):

NetList -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Ospf Export/n Rtr/<string> Ospf Ex-port/n Rtr/<string> Vrf/<string> Ospf Export/n Eachinstance of this component specifies an OSPF ex-port policy. An OSPF export policy is used to decideif a route in the IP forwarding table should beblocked or advertised as OSPF external routes ontoattached OSPF areas of the routing component (Vr,Rtr or Vrf). The Ospf component by default advert-ises all OSPF external routes based on the metricand tag in the IP forwarding table.

519


Class NA

Presence required

Visibility customer

Unit

Range [0..65535]

Data Type Decimal

Initial Value

advertiseStatus

Parameter name advertiseStatus

Domain

Description This attribute specifies if the routes that match thisexport policy are advertised (send) or not advert-ised (block).

Class NA

Presence required

Visibility customer

Range send, block


Initial value send

bgpAsId

Parameter name bgpAsId

Domain

Description This attribute specifies the BGP AS from which aBGP route is learned from. This key is used only ifthe protocol is bgpExternal. bgpAsId of value 0matches all ASs.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

bgpPeerIp

520


Parameter name bgpPeerIp

Domain

Description This attribute specifies the BGP peer where theroutes were learned from. bgpPeerIp of 0 matchesall BGP peers. This attribute is used as a key whenprotocol is set to bgpInternal or bgpExternal.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

description

Parameter name description

Domain

Description This attribute describes the policy. For example, 'toexport OSPF routes to MCI'.

Class NA

Presence required

Visibility customer

Range [0..255]


Initial value

egpAsId

Parameter name egpAsId

Domain

Description This attribute specifies the EGP learned routes towhich this export policy applies, based on the EGPautonomous system identifier of which the routesare learned from. This attribute can only be nonzero when protocol is set to egp. The value of 0 im-plies any EGP autonomous system; otherwise thevalue of this attribute must match the asId of anEGP neighbor on the same virtual router.

Class NA

Presence required

Visibility customer

521


Range [0..65535]

Data type Decimal

Initial value 0

extLsaMetricType

Parameter name extLsaMetricType

Domain

Description This attribute specifies the metric type in the OSPFexternal link state advertisement of the routes beingexported as a result of matching this export policy.If the attribute advertiseStatus is set to block, thenthe value of extLsaMetricType is ignored. The extL-saMetricType value is not used to select whichroutes to block or send, but rather the metric valueadvertised for the routes. The value useProtocolDe-fault indicates the metric type is automaticallychosen based on the routing protocol which theroute was learned from.

Class NA

Presence required

Visibility customer

Range useProtocolDefault, type1, type2


Initial value useProtocolDefault

metric


Domain

Description This attribute specifies the metric to be used on theroutes being exported as a result of matching thisexport policy. If the attribute advertiseStatus is setto block, then the value of metric is ignored. Themetric value is not used to select which routes toblock or send, but rather the metric value advertisedfor the routes. A value of -1 indicates that the metricassociated with the route in the forwarding table isused.

Class NA

Presence required

Visibility customer

Range [-1..16777215]

522


Data type Signed

Initial value -1

protocol

Parameter name protocol

Domain

Description This attribute specifies the routes to which this ex-port policy applies based on the routing protocol ofhow the routes are learned. If the value is all, thepolicy applies to all routes in the forwarding table,with the following exceptions: external BGP routesare always excluded and internal BGP routes areexcluded if the parent Ospf component's reDistrib-uteIBGP attribute has the value false.

Class NA

Presence required

Visibility customer

Range all, egp, rip, staticLocal, staticRemote, bgpInternal,bgpExternal, mbgp, bgpMplsInternal


Initial value all

ripInterface

Parameter name ripInterface

Domain

Description This attribute specifies the RIP learned routes towhich this export policy applies, based on the RIPinterface from which the routes are learned. This at-tribute can only be non zero when the protocol isset to rip. The value of 0.0.0.0 implies any RIP inter-face on the same routing component (Vr, Rtr orVrf); otherwise the value of this attribute mustmatch the interface address of an Interface or a Lo-gicalIf that has a RipIf on the same routing compon-ent.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


523


Initial value N.A.

ripNeighbor

Parameter name ripNeighbor

Domain

Description This attribute specifies the RIP learned routes towhich this export policy applies, based on the RIPneighbor of which the routes are learned from. Thisattribute can only be non zero when the protocol isset to rip. The value of 0.0.0.0 implies any RIPneighbor.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

tag

Parameter name tag

Domain

Description This attribute specifies the OSPF tag to be used onthe routes being exported as a result of matchingthis export policy. If the attribute advertiseStatus isset to block, then the value of tag is ignored. Thetag value is not used to select which routes to blockor send, but rather the tag value advertised for theroutes. A value of 4294967295 indicates that thetag associated with the route in the forwarding tableis used.

Class NA

Presence required

Visibility customer

Range [0..4294967295]



524


124 InwOspfExportNetworkList (NetList)






Parents:

EM - Vr - Ip - Ospf - Export - NetList

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description This component identifies a set of attributes whenmatched determines the export policy applied.

Class NA

Presence required

Visibility customer

Unit

Range [0..65535]

525


Data Type Decimal

Initial Value

ipAddress


Domain

Description This attribute identifies the 32 bit IP address tomatch against.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

ipMask

Parameter name ipMask

Domain

Description This attribute is the IP Mask to be used with the IPAddress to match against.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

526


125 InwOspfHostEntry (Host)






Parents:

EM - Vr - Ip - Ospf - Host

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Ospf HostEntry/<Ip Ad-dress>,<Decimal> Rtr/<string> Ospf HostEntry/<IpAddress>,<Decimal> Rtr/<string> Vrf/<string> OspfHostEntry/<Ip Address>,<Decimal> This compon-ent indicates what hosts are directly attached to therouter, and what metrics and types of serviceshould be advertised for them. This component isan optional subcomponent of Ospf.

Class NA

527


Presence required

Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255],[0..0]

Data Type Ip4Address,Decimal

Initial Value

areaId

Parameter name areaId

Domain

Description This is an Ip address for the Host Entry that indic-ates the area it belongs to.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

metric


Domain

Description The metric to be advertised.

Class NA

Presence required

Visibility customer

Range [1..65535]

Data type Decimal

Initial value 1

528


126 InwOspfIf (OspfIf)






Parents:

EM - Vr - Pp - IpPort - LogicalIf - OspfIf

Child(ren):

Nbr - TOS -

Identifiers:

-

Links:


Parameters:

areaId

Parameter name areaId

Domain

Description The area Id this Ospf interface belongs to.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

authType

529



Domain

Description The authentication type specified for this Ospf inter-face.

Class NA

Presence required

Visibility customer

Range none, simplePassword, md5, SameAsArea


Initial value SameAsArea

helloInterval


Domain

Description The length of time, in seconds, between the Hellopackets that the router sends on the interface. Thisvalue must be the same for all routers attached to acommon network.

Class NA

Presence required

Visibility customer

Range [1..3600]

Data type Decimal

Initial value 10

ifType

Parameter name ifType

Domain

Description This attribute specifies the type of this OspfInter-face. Neighbors are dynamically discovered usingthe Hello protocol for an ifType of broadcast, point-ToPoint, or pointToMultipoint when pointToMulti-PointMode is set to broadcast. A Neighbor compon-ent must be configured for an ifType of nbma orpointToMultiPoint, when pointToMultiPointMode isset to nonBroadcast. When ifType is set to passive,neighbors are not required.

Class NA

Presence required

530


Visibility customer

Range broadcast, nbma, pointToPoint, passive, point-ToMultiPoint


Initial value N.A.

multicastForwarding

Parameter name multicastForwarding

Domain

Description The way multicasts should be forwarded on this in-terface; non forwarded, forwarded as data-link mul-ticasts, or forwarded as data-link unicasts. Data-linkmulticasting is not meaningful on point-to-point andNBMA(No Broadcast Multi Access) interfaces, andsetting this attribute to blocked effectively disablesall multicast forwarding.

Class NA

Presence required

Visibility customer

Range blocked


Initial value blocked

pointToMultiPointMode

Parameter name pointToMultiPointMode

Domain

Description This attribute specifies the Point-to-Multipoint modeto use when the ifType of this OspfInterface ispointToMultipoint. A value of nonBroadcast restrictsthis interface to only send unicast packets, Hence,a Neighbor component must be configured. A valueof broadcast enables sending multicast OSPF Hellopackets to dynamically discover neighbors.

Class NA

Presence required

Visibility customer

Range nonBroadcast, broadcast


Initial value nonBroadcast

531


pollInterval

Parameter name pollInterval

Domain

Description The largest time interval, in seconds, between thehello packets sent to an inactive non-broadcastmulti-access neighbor.

Class NA

Presence required

Visibility customer

Range [1..3600]

Data type Decimal

Initial value 120

retransInterval

Parameter name retransInterval

Domain

Description The number of seconds between link-state advert-isements retransmissions, for adjacencies belong-ing to this interface. This value is also used whenretransmitting database description and link-staterequest packets.

Class NA

Presence required

Visibility customer

Range [1..3600]

Data type Decimal

Initial value 5

rtrDeadInterval

Parameter name rtrDeadInterval

Domain

Description The number of seconds that a router's hello packetshave not been seen before it's neighbors declarethe router down. This should be some multiple ofthe helloIntereval. This value must be the same forall routers attached to a common network.

Class NA

532


Presence required

Visibility customer

Range [1..3600]

Data type Decimal

Initial value 40

rtrPriority

Parameter name rtrPriority

Domain

Description The priority of this interface. Used in multi-accessnetworks, this field is used in the designated routerelection algorithm. The value 0 signifies that therouter is not eligible to become the designatedrouter on this particular protocol port. In the event ofa tie in this value, routers will use their routerId as atie breaker.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 1

snmpAdminStatus


Domain

Description The administrative status of this Ospf interface.

Class NA

Presence required

Visibility customer

Range up, down


Initial value up

transitDelay

Parameter name transitDelay

Domain

533


Description The estimated number of seconds it takes to trans-mit a link-state update packet over this interface.

Class NA

Presence required

Visibility customer

Range [1..3600]

Data type Decimal

Initial value 1

534


127 InwOspfIfNeighbor (Nbr)






Parents:

EM - Vr - Pp - IpPort - LogicalIf - OspfIf - Nbr

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Pp/<string> IpPort logicalIf/<Ip Ad-dress> ospfIf OspfIfNeighbor/<Ip Address> Rtr/<string> If/<Ip Address> ospfIf OspfIfNeighbor/<IpAddress> Rtr/<string> Vrf/<string> If/<Ip Address>ospfIf OspfIfNeighbor/<Ip Address> This compon-ent represents a neighbor on a multi-access non-broadcast OspfInterface configured with its ifTypeattribute set to one of the following: - nbma and thertrPriority attribute is set to non-zero or - point-ToMultiPoint and pointToMultiPointMode is set to

535


nonBroadcast. The operational attributes for thiscomponent can also be viewed from: Vr/<string> IpOspf NbrEntry/<Ip Address>,<Decimal> or Rtr/<string> Ospf NbrEntry/<Ip Address>,<Decimal> orRtr/<string> Vrf/<string> Ospf NbrEntry/<Ip Ad-dress>,<Decimal>

Class NA

Presence required

Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255]


Initial Value

priority

Parameter name priority

Domain

Description The priority of this neighbor in the designated routerelection algorithm. The value 0 signifies that theneighbor is not eligible to become the designatedrouter on this particular network. The higher thenumber, the better are the chances of being a des-ignated router.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 1

536


128 InwOspfIfTypeOfService (TOS)






Parents:

EM - Vr - Pp - IpPort - LogicalIf - OspfIf - TOS

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Pp/<string> IpPort logicalIf/<Ip Ad-dress> ospfIf OspfIfTypeOfService/<Decimal> Rtr/<string> If/<Ip Address> ospfIf OspfIfTypeOfSer-vice/<Decimal> Rtr/<string> Vrf/<string> If/<Ip Ad-dress> ospfIf OspfIfTypeOfService/ <Decimal> Thiscomponent describes the metrics to be advertisedfor a specified interface at various types-of-service.

Class NA

Presence required

537


Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value

tosMetric

Parameter name tosMetric

Domain

Description The metric using this typeOfService on this inter-face.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 1

538


129 InwOspfStubAreaEntry (Stub)






Parents:

EM - Vr - Ip - Ospf - Stub

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Ospf StubAreaEntry/<Ip Ad-dress>,<Decimal> Rtr/<string> OspfStubAreaEntry/<Ip Address>,<Decimal> Rtr/<string> Vrf/<string> Ospf StubAreaEntry/<Ip Ad-dress>,<Decimal> This component describes met-rics that a default area border router will advertiseinto a stub area.

Class NA

Presence required

539


Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255],[0..0]


Initial Value

advertiseDefault

Parameter name advertiseDefault

Domain

Description This attribute determines whether or not the defaultrouting information will be advertised, depending onother criterion. Setting this value to no can preventadvertising default routing information. If the valueof the attribute is set to yes, then the value of the at-tribute importAsExtern for that particular AreaEntryshould be set to importNssa.

Class NA

Presence required

Visibility customer

Range yes, no


Initial value yes

metric


Domain

Description The metric value applied at the indicated type ofservice.

Class NA

Presence required

Visibility customer

Range [1..4294967295]


Initial value 1

metricType

Parameter name metricType

540


Domain

Description This type of the metric advertised as a default route.

Class NA

Presence required

Visibility customer

Range ospfMetric, comparableCost, nonComparable


Initial value ospfMetric

541


130 InwOspfVirtIfEntry (VirtIf)






Parents:

EM - Vr - Ip - Ospf - VirtIf

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Ospf VirtIfEntry/<Ip Address>,<Ip Ad-dress> Rtr/<string> Ospf VirtIfEntry/<Ip Ad-dress>,<Ip Address> Rtr/<string> Vrf/<string> OspfVirtIfEntry/<Ip Address>,<Ip Address> This com-ponent describes all the virtual links configured forthis OSPF Router.

Class NA

Presence required

Visibility customer

542


Unit

Range [0..255].[0..255].[0..255].[0..255],[0..255].[0..255].[0..255].[0..255]

Data Type Ip4Address,Ip4Address

Initial Value

authType


Domain

Description The authentication type specified for this VirtIf.

Class NA

Presence required

Visibility customer

Range none, simplePassword, md5, SameAsArea


Initial value SameAsArea

helloInterval


Domain

Description The length of time, in seconds, between the Hellopackets that the router sends on the interface. Thisvalue must be the same for the virtual neighbor.

Class NA

Presence required

Visibility customer

Range [1..3600]

Data type Decimal

Initial value 10

retransInterval

Parameter name retransInterval

Domain

Description The number of seconds between link-state advert-isement retransmissions, for adjacencies belongingto this interface. This value is also used when re-transmitting database description and link-state re-

543


quest packets. This value would be well over theexpected round-trip time.

Class NA

Presence required

Visibility customer

Range [1..3600]

Data type Decimal

Initial value 5

rtrDeadInterval

Parameter name rtrDeadInterval

Domain

Description The number of seconds that a router's Hello pack-ets have not been seen before its neighbors declarethe router down. This should be some multiple ofthe Hello interval. This value must be the same forthe virtual neighbor.

Class NA

Presence required

Visibility customer

Range [1..3600]

Data type Decimal

Initial value 60

transitDelay

Parameter name transitDelay

Domain

Description The estimated number of seconds it takes to trans-mit a link-state update packet over this interface.

Class NA

Presence required

Visibility customer

Range [1..3600]

Data type Decimal

Initial value 1

544


131 InwPol (Policy)






Parents:

EM - Vr - Ip - Pg - Policy

Child(ren):

TosMap -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Pg/<string> Policy/<string> ThePolicy component defines IP packet classificationrules that are applied when the CosPolicyGroup isused by an IpPort. The classification rules aredefined by two sets of parameters: 1. The criteria toselect IP packets. These criteria are defined by theTosMap and IpAddrLayer4Flow subcomponents. 2.The IP Class of Service (CoS) assigned to a packetwhen the policy is applied. The CoS is specified bythe assignedCos attribute. The component instance

545


is an arbitrary text string to allow the operator to as-sign a meaningful name for easy reference.

Class NA

Presence required

Visibility customer

Unit

Range [1..20]


Initial Value

assignedCos

Parameter name assignedCos

Domain

Description This attribute specifies the Class of Service (CoS)assigned to an IP packet if the Policy applies. Theassigned CoS controls the forwarding behavior andegress DSCP marking of the packet. See the de-scription of the CosPolicyGroup component formore information.

Class NA

Presence required

Visibility customer

Range [0..3]

Data type Decimal

Initial value 0

546


132 InwPolGrp (Pg)






Parents:

EM - Vr - Ip - Pg

Child(ren):

Ect - Ict - Policy -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip CosPolicyGroup/<string> This com-ponent and its subcomponents specify the IP Classof Service (CoS) capabilities of an IpPort. Up to fourdifferent forwarding and packet marking behaviorscan be configured. For a greater range of forward-ing and packet marking behaviors, the Differenti-ated Services capabilities of the Vr Differentiated-ServicesDomain and Vr Ip DiffServProfile compon-ents is used. See the descriptions of those compon-ents for more information. A CosPolicyGroup com-

547


ponent is used by all IpPort subcomponents of aVirtualRouter by setting the cosPolicyAssignmentattribute of the Ip component. It is used by one ormore IpPort subcomponents directly by setting thecosPolicyAssignment attribute of the IpPort. Thedirect assignment to the IpPort completely overridesthe assignment to the Ip. Processing of IP packetswith CosPolicyGroup components is based on aClass Of Service (CoS) value assigned to each IPpacket as it processed by the VirtualRouter. CoSvalues vary over the range from 0 to 3 and havelocal significance only. There are six logical stagesin CoS processing on the VirtualRouter. These sixstages are presented below, along with the behavi-or of locally generated packets, and the behavior ofany IpPort that does not use a CosPolicyGroup,and exceptions for MS3 cards. 1. INGRESS CLAS-SIFICATION AND CoS ASSIGNMENT The ClassOf Service (CoS) value assigned to an IP packet isinitialized to be equal to the connection class valueassociated with the ingress Layer 2 connectionwhere the packet was received. For AtmMpe, theconnection class is specified by the ipCos attributeof the AtmConnection subcomponent. For FrDte,the connection class is specified by the ipCoS at-tribute of the StaticDlci or DynamicDlciDef subcom-ponent. For IpDlciGroup, the connection class isspecified by the ipCos attribute of the FrConnectionsubcomponent. For all other media, the connectionclass is specified by the ipCoS attribute of the Ip-Port. After classification is performed as describedabove, if one or more TosMap components existunder a Policy subcomponent of the CosPolicy-Group used by the IpPort where the packet was re-ceived, then the Class Of Service (CoS) assignedto the packet is updated according to these com-ponents if there is a match. A match occurs if selec-ted bits of the Differentiated Services (DS) field,also known at the Type of Service (ToS) field, areequal to the same selected bits of one of the valuesspecified by the tos attribute of a TosMap subcom-ponent of the CosPolicyGroup used by the IpPortwhere the packet was received. If a match occurs,then the CoS value assigned to the packet is setequal to the value of the assignedCos attribute ofthe parent Policy of the TosMap where the matchoccurred. If one or more IpAddrLayer4Flow sub-components exist under a Policy subcomponent ofthe CosPolicyGroup used by the IpPort where thepacket was received, then the Class Of Service(CoS) assigned to the packet is updated according

548


to these components if there is a match. This over-rides any prior CoS assignment. 2. DROP PRE-CEDENCE ASSIGNMENT The packet is assigneda logical drop precedence value according to the In-gressCosTreatment subcomponents of the CosPoli-cyGroup used by the IpPort where the packet wasreceived. The drop precedence is obtained fromdiscardPriority attribute of the IngressCosTreatmentcomponent whose instance value matches theClass Of Service (CoS) value currently assigned tothe packet. If the selected IngressCosTreatmentdiscardPriority attribute specifies low, medium, orhigh, then a drop precedence is assigned accord-ingly. If the selected IngressCosTreatment specifiesunchanged, then the drop precedence assigned tothe packet is not modified. A drop precedence is as-signed to a packet to control its loss sensitivity relat-ive to other packets when the packets are placedinto the same queue, as explained in Step 6. Gen-erally, the low value indicates the packet is lesslikely to be discarded when the queue is congested.This traffic has a higher probability of being forwar-ded. The high value indicates the packet is morelikely to be discarded when the queue is congested.This traffic has a lower probability of being forwar-ded. The actual loss sensitivity of packets dependson the discarding mechanism at the queue. 3.SCHEDULING CLASS ASSIGNMENT The packetis assigned a scheduling class value for eight, four,three, and two queues in the range from 0 to 7, 0 to3, 0 to 2, and 0 to 1, respectively. These values arederived from the emissionPriority attribute of theEgressCosTreatment subcomponents of theCosPolicyGroup used by the IpPort where the pack-et is transmitted. The emissionPriority attribute ofthe EgressCosTreatment subcomponent whose in-stance value matches the Class Of Service (CoS)value assigned to the packet is used. The emis-sionPriority attribute of the EgressCosTreatmentcomponent is mapped to scheduling classes ac-cording to the following table: --------------------------------------------------------------------------Emission Scheduling Class Priority 8 Queues4Queues 3Queues 2 Queues ----

549


----------------------------------------------------------------------1 5 3 2 1 2 4 2 1 0 3 2 1 0 0 4 0 0 0 0 5 0 0 0 0 6 00 0 0 7 0 0 0 0 8 0 0 0 0 Scheduling classes are as-signed to a packet to control its scheduling behaviorrelative to other packets at the egress interfacewhere the packets are transmitted, as explained inStep 6. Generally, a numerically higher value ofscheduling class (lower value of emission priority)indicates the packet is less likely to be delayed.This traffic is considered more urgent and lessdelay tolerant. A numerically lower value ofscheduling class (higher value of emission priority)indicates the packet is more likely to be delayed.This traffic is considered less urgent and moredelay tolerant. The actual scheduling behavior ofpackets depends on the scheduling mechanism andnumber of queues at the egress interface. 4.EGRESS DSCP MARKING The DSCP field of thepacket is marked according to the EgressCosTreat-ment subcomponents of the CosPolicyGroup usedby the IpPort where the packet is transmitted. TheDSCP value is obtained from tos attribute of theEgressCosTreatment component whose instancevalue matches the Class Of Service (CoS) valuecurrently assigned to the packet. The new value ofthe DSCP field does not influence the forwardingbehavior of the packet as it continues to be pro-cessed by the VirtualRouter, but it may have signi-ficance at the next hop. 5. MULTI-CONNECTIONCONGESTION CONTROL The CoS assigned tothe packet is used to select one of up to four Layer2 connections at the IpPort where the packet istransmitted. Per-packet selection of egress connec-tions is supported only if these conditions are alltrue: i) the egress media is FrDte, AtmMpe, IpDlciG-roup, and ii) more than one Layer 2 connection isconfigured to the next hop IP router, and iii) eachconnection is provisioned with a different connec-tion class. Normally the packet is transmitted on theconnection whose connection class is equal to theCoS assigned to the packet. If that connection doesnot exist, then the connection having the next lowerconnection class is used. If that connection doesnot exist also, then the connection having the nexthigher connection class is used. For AtmMpe theconnection class is specified by the ipCos attributeof the AtmConnection subcomponent. For FrDte theconnection class is specified by the ipCoS attributeof the StaticDlci and DynamicDlciDef subcompon-ents. For IpDlciGroup the connection class is spe-

550


cified by the ipCos attribute of the FrConnectionsubcomponent. If each Layer 2 connection is con-figured to provide different policing and schedulingcharacteristics, then the forwarding behaviors of IPpackets are differentiated as they transit throughthe Layer 2 network. In general, the schedulingcharacteristics of the connections should be con-figured to be better for numerically greater connec-tion class values. For example, if four AtmConnec-tion components are associated with AtmIf compon-ents configured for ATM service classes UBR,nrtVBR, rtVBR, and CBR, then the ipCos attributesof the AtmConnection components should be either0, 1, 2 and 3, respectively, or 0, 1, 3 and 2 respect-ively. 6. SINGLE-CONNECTION CONGESTIONCONTROL The drop precedence and schedulingclasses assigned to the packet are used by theegress interface where the packet is transmitted,but only if the egress interface supports these para-meters on a per- connection basis. Multiple dropprecedences are supported on GQM cards at Atm-Mpe interfaces. On FQM interfaces they are sup-ported at Gigabit Ethernet interfaces. On PQCcards with AQM they are supported at AtmMpe,FrDte, IpDlciGroup, and Ethernet interfaces. OnPQC cards with APC the drop precedence of apacket is controlled by the outgoing ATM CLP orFrame Relay DE bit which is determined by by thedrop precedence of the PHB and the Layer 2 con-figuration. On CQC cards multiple drop preced-ences are supported at AtmMpe interfaces. OnSBIC cards they are supported at PPP and FrDteinterfaces. Eight queues per connection are suppor-ted on FQM cards at Gigabit ethernet interfaces.Four queues per connection are supported on PQCcards at PPP interfaces, at FrDte interfaces provi-sioned with DirectConnection, and at IpDlciGroupand IpoDlci interfaces where FRF.12 is disabled onthe DLCI. Two queues per connection are suppor-ted on SBIC cards at PPP and FrDte interfaces.Only one queue per connection is supported onATM interfaces. This implies that multi-connectioncongestion control must be used to provide shedul-ing differentiation at ATM interfaces. LOCALLYGENERATED PACKETS Ingress classification isnot performed on packets generated locally at theVirtualRouter. For a locally generated packet thatused for network control the assigned Class Of Ser-vice (CoS) value and the assigned drop preced-ence, is initialized to 3 and low respectively. For anyother locally generated packet, these values are ini-

551


tialized to 0 and medium respectively. For a locallygenerated ICMP echo request packet, the assignedCoS is overridden by the -cos option of the Pingcommand. For a locally generated ICMP echo replypacket, the assigned CoS is set equal to the as-signed CoS of the received request packet. TheDSCP field of locally generated packets that usedfor network control is always initialized to 48. TheDSCP field of other packets is always initialized to0. For a locally generated ICMP echo request pack-et, the initial value of the DSCP field is overriddenby the -tos or -dscp option of the Ping command.For a locally generated ICMP echo reply packet, theDSCP field is set to the value contained in the IPheader of the received request packet. Locally gen-erated IP multicast and IP broadcast packets arenot subject to Multi-Connection Congestion Controlas described above. Each of these packets iscopied and transmitted individually on each of theavailable connections. DEFAULT BEHAVIOR TheIP CoS behavior of any IpPort that does not use aCosPolicyGroup (by setting the cosPolicyAssign-ment attribute of the Ip or IpPort as explainedabove) is identical to an IpPort that uses theCosPolicyGroup described here: There are noPolicy subcomponents. There are four In-gressCosTreatment subcomponents with instancevalues 0, 1, 2, 3 where the discardPriority attributeof each instance is set to unchanged. There arefour EgressCosTreatment subcomponents with in-stance values 0, 1, 2, 3 where the emissionPriority,setTosByte, tos, and tosMask attributes of each in-stance are set to 4, no, 0, and hexadecimal FC, re-spectively. EXCEPTIONS FOR GQM-BASED andFQM_BASED CARDS The use of the CosPolicy-Group component at interfaces on a VirtualRouterthat does not have a DifferentiatedServicesDomainsubcomponent also applies as described above toGigabit Ethernet on FQM-based cards and AtmMpeinterfaces on GQM-based cards, with the followingsix exceptions: 1) The TosMap and IpAddrLay-er4Flow components are always ignored at an in-gress interface on one of these cards. 2) An IPpacket received on a Gigabit Ethernet interface isalways assigned high drop precedence. 3) An IPpacket received on a ATM interface on one of thesecards is always assigned unchanged drop preced-ence. 4) An IP packet received at an ingress inter-face on one of these cards is always assignedscheduling class 0. 5) An IP packet transmitted ategress Gigabit Ethernet interface is always as-

552


signed scheduling class 0. 6) An IP packet receivedat an ingress interface on one of these cards is isnot eligible for egress DSCP marking at any inter-face.

Class NA

Presence required

Visibility customer

Unit

Range [1..20]


Initial Value

linkToPolicyUsers

Parameter name linkToPolicyUsers

Domain

Description This attribute specifies components that are linkedto CosPolicyGroup. Only Ip and IpPort subcompon-ents of the same VirtualRouter can be linked. ACosPolicyGroup component is used by all IpPortsubcomponents of a VirtualRouter by setting thecosPolicyAssignment attribute of the Ip component.It is used by one or more IpPort subcomponents dir-ectly by setting the cosPolicyAssignment attribute ofthe IpPort. The direct assignment to the IpPort com-pletely overrides the assignment to the Ip.

Class NA

Presence optional

Visibility customer

Range Vr Ip, Vr Pp IpPort


Initial value N.A.

553


133 InwRipExport (Export)






Parents:

EM - Vr - Ip - Rip - Export

Child(ren):

Net -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Rip Export/<Decimal> Rtr/<string>Rip Export/<Decimal> Rtr/<string> Vrf/<string> RipExport/<Decimal> Each instance of this componentspecifies a RIP export policy. A RIP export policy isused to decide if a route in the IP forwarding tableshould be blocked or advertised as a RIP route onone or all RIP interfaces of the routing component(Vr, Rtr or Vrf). The Rip component by default ad-vertises all local routes and all RIP learned routesto all RIP interfaces based on the metric in the IP

554


forwarding table.

Class NA

Presence required

Visibility customer

Unit

Range [0..65535]

Data Type Decimal

Initial Value

advertiseStatus

Parameter name advertiseStatus

Domain

Description This attribute specifies if the routes that match thisexport policy are advertised (send) or not advert-ised (block).

Class NA

Presence required

Visibility customer

Range send, block


Initial value send

bgpAsId

Parameter name bgpAsId

Domain

Description This key attribute specifies the BGP AS from whichthe routes are learned. This key will be used onlywhen the protocol is set to bgpExternal. bgpAsId of0 matches all BGP ASs.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

555


description


Domain

Description The attribute describes the policy. For example, 'toexport RIP routes to AS 1'.

Class NA

Presence required

Visibility customer

Range [0..255]


Initial value

egpAsId

Parameter name egpAsId

Domain

Description Under the Rtr and Rtr Vrf, this attribute has no ef-fect. Under the Vr, this attribute specifies the EGPlearned routes to which this export policy applies,based on the EGP autonomous system identifier ofwhich the routes are learned from. This attributecan only be non zero when protocol is set to egp.The value of 0 implies any EGP autonomous sys-tem; otherwise the value of this attribute mustmatch the asId of an EGP neighbor on the samevirtual router.

Class NA

Presence required

Visibility customer

Range [0..65536]

Data type Decimal

Initial value 0

exportMetric

Parameter name exportMetric

Domain

Description This attribute specifies the metric to be used on theroutes being exported as a result of matching thisexport policy. If the attribute advertiseStatus is setto block, then the value of exportMetric is ignored.The exportMetric value is not used to select which

556


routes to block or send, but rather the metric valueadvertised for the routes. A value of 0 indicates thatthe exported routes will be advertised with their ori-ginal metric. When exporting routes from other pro-tocols into RIP, an exportMetric value of 0 will dis-tribute these routes with the metric of the originalprotocol. If the metric of the original protocol ex-ceeds 15, the exported routes will be considered asunreachable by RIP. If an exportMetric value of 16is specified, the exported routes will be advertisedinto RIP as unreachable.

Class NA

Presence required

Visibility customer

Range [0..16]

Data type Decimal

Initial value 0

ospfTag

Parameter name ospfTag

Domain

Description This attribute specifies the OSPF learned externalroutes to which this export policy applies, based onthe learned OSPF tag of the routes. This attributecan only be set to a non default value when pro-tocol is set to ospfExternal. The default value of4294967295 implies any tag.

Class NA

Presence required

Visibility customer

Range [0..4294967295]



outInterface

Parameter name outInterface

Domain

Description This attribute specifies the RIP interface on the vir-tual router which routes are exported onto as a res-ult of matching this export policy. If the attribute ad-vertiseStatus is set to block, then the value of

557


outInterface is ignored. The outInterface value isnot used to select which routes to block or send, butrather where to export the routes. A value of 0.0.0.0indicates that the routes are exported to all RIP in-terfaces on the routing component (Vr, Rtr or Vrf).Otherwise, the value of this attribute must matchthe interface address of a LogicalIf or Interface thathas a RipIf on the same routing component.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

protocol


Domain

Description This attribute specifies the routes to which this ex-port policy applies based on the routing protocol ofhow the routes are learned. If the value is all, thepolicy applies to all routes in the forwarding table,with the following exceptions: external BGP routesare always excluded and internal BGP routes areexcluded if the parent Rip component's reDistrib-uteIBGP attribute has the value false.

Class NA

Presence required

Visibility customer

Range all, egp, rip, ospfInternal, ospfExternal, staticLocal,staticRemote, bgpInternal, bgpExternal, mbgp, bgp-MplsInternal


Initial value all

ripInterface

Parameter name ripInterface

Domain

Description This attribute specifies the RIP learned routes towhich this export policy applies, based on the RIPinterface from which the routes are learned. This at-

558


tribute can only be non zero when the protocol isset to rip. The value of 0.0.0.0 implies any RIP inter-face on the same routing component (Vr, Rtr orVrf); otherwise the value of this attribute mustmatch the interface address of a LogicalIf or Inter-face that has a RipIf on the same routing compon-ent. DESCRIPTION

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

559


134 InwRipExportNetworkList (Net)






Parents:

EM - Vr - Ip - Rip - Export - Net

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Rip Export/<Decimal> NetworkList/<Decimal> Rtr/<string> Rip Export/<Decimal> Net-workList/<Decimal> Rtr/<string> Vrf/<string> RipExport/<Decimal> NetworkList/<Decimal> Thiscomponent identifies a set of attributes whenmatched determines the export policy applied.

Class NA

Presence required

Visibility customer

560


Unit

Range [0..65535]

Data Type Decimal

Initial Value

ipAddress


Domain

Description This attribute identifies the 32 bit IP address tomatch against.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

ipMask


Domain

Description This attribute is the IP Mask to be used with the IPAddress to match against.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

561


135 InwRipImport (Import)






Parents:

EM - Vr - Ip - Rip - Import

Child(ren):

Net -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Rip Import/<Decimal> Rtr/<string>Rip Import/<Decimal> Rtr/<string> Vrf/<string> RipImport/<Decimal> This component controls thefunctionality of Route Leaking. In other words, thiscomponent will determine what routes are used byRIP.

Class NA

Presence required

Visibility customer

562


Unit

Range [0..65535]

Data Type Decimal

Initial Value

description


Domain

Description This attribute describes the policy. For example, 'toimport RIP routes from MCI'.

Class NA

Presence required

Visibility customer

Range [0..255]


Initial value

importMetric

Parameter name importMetric

Domain

Description This attribute is used to override the default importmetric for the RIP protocol. This value is not used toselect which routes to use or ignore, rather it is themetric to be used in the routing table for the routesimported for this import policy. A value of zero indic-ates that the metric received in the update will beused.

Class NA

Presence required

Visibility customer

Range [0..16]

Data type Decimal

Initial value 0

interface

Parameter name interface

Domain

563


Description This attribute specifies the RIP interface to whichthis import policy applies. The value of 0.0.0.0 im-plies any RIP interface on the routing component(Vr, Rtr or Vrf); otherwise the value of this attributemust match the interface address of a LogicalIf orInterface that has a RipIf on the same routing com-ponent.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

neighbor

Parameter name neighbor

Domain

Description This attribute indicates the IP Address of the neigh-bor this policy will apply to.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

usageFlag

Parameter name usageFlag

Domain

Description This flag when set to ignore indicates the routesthat are not used and if set to use, indicates theroutes which are used.

Class NA

Presence required

Visibility customer

Range use, ignore


Initial value use

564


565


136 InwRipImportNetworkList (Net)






Parents:

EM - Vr - Ip - Rip - Import - Net

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Rip Import/<Decimal> NetworkList/<Decimal> Rtr/<string> Rip Import/<Decimal> Net-workList/<Decimal> Rtr/<string> Vrf/<string> RipImport/<Decimal> NetworkList/<Decimal> Thiscomponent identifies a set of networks that this Im-port policy will apply to.

Class NA

Presence required

Visibility customer

566


Unit

Range [0..65535]

Data Type Decimal

Initial Value

ipAddress


Domain

Description This attribute specifies the IP address that needs tobe matched against in this network list for the Im-port Policy to be applied to.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

ipMask


Domain

Description This attribute specifies the IP mask for the attributeipAddress.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

567


137 InwSpvcTerminationPoint (Stp)






Parents:

EM - AtmMpe - Stp

Child(ren):

-

Identifiers:

-

Links:


Parameters:

localAddress

Parameter name localAddress

Domain

Description This attribute specifies the NSAP address of this At-mMpe component. The default is an empty string. Ifno NSAP address is provisioned, a default NSAPaddress is provided. To view the generated defaultaddress refer to the opLocalAddress attribute underthis component after the act prov command is ex-ecuted.

Class NA

Presence required

Visibility customer

Range [0..40]

568


Data type HexString

Initial value

softPvcHoldOffTime

Parameter name softPvcHoldOffTime

Domain

Description This attribute specifies how long to hold off beforeattempting to reestablish a connection after an es-tablished SPVC connection is cleared/released.The softPvcHoldOffTime attribute applies to all con-nections managed by the parent AtmMpe compon-ent.

Class NA

Presence required

Visibility customer

Range { [50..3600000],0 }


Initial value 20000

softPvcRetryPeriod


Domain

Description This attribute specifies the interval at which anSPVC connection attempts establishment after afailed setup attempt occurs. The softPvcRetryPeri-od attribute applies to all connections managed bythe parent AtmMpe component.

Class NA

Presence required

Visibility customer

Range [10..3600]

Data type Decimal

Initial value 20

569


138 InwSrcPvc (SrcPvc)






Parents:

EM - AtmMpe - Ac - SrcPvc

Child(ren):

Tm -

Identifiers:

-

Links:


Parameters:

calledVpiVci


Domain

Description This attribute represents the called VPI and VCI ofthe soft PVC when the called endpoint is an AtmIfVcc and is used to specify the full Vpi.Vci of the At-mIf Vcc.

Class NA

Presence required

Visibility customer

Range { [0..4095],[0..65535], }


Initial value N.A.

570


remoteAddress

Parameter name remoteAddress

Domain

Description This attribute specifies the NSAP address of thecalled SPVC endpoint (this must be a remote Atm-Mpe component).

Class NA

Presence required

Visibility customer

Range [40..40]

Data type HexString

Initial value N.A.

remoteConnectionIdentifier

Parameter name remoteConnectionIdentifier

Domain

Description This attribute specifies the remote connection iden-tifier of the SPVC. It is provisioned with the Ac in-stance of the AtmMpe Ac component at the calledSPVC endpoint.

Class NA

Presence required

Visibility customer




571


139 InwStatic (Static)






Parents:

EM - Vr - Ip - Mcast - Static

Child(ren):

Route -

Identifiers:

-

Links:


Parameters:

572


140 InwStaticRouteEntry (Route)






Parents:

EM - Vr - Ip - Mcast - Static - Route

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Ip Mcast Static RouteEntry/<IP Ad-dress>,<Domain> This component represents amulticast static route entry. For a RouteEntry to bevalid, there should be at least one outInterface pro-visioned.

Class NA

Presence required

Visibility customer

573


Unit

Range [0..255].[0..255].[0..255].[0..255],[0..3]


Initial Value

outInterfaces

Parameter name outInterfaces

Domain

Description This attribute specifies a list of links to LogicalInter-faces representing the outgoing interfaces for thismulticast static route entry. Each RouteEntry mustbe provisioned with at least one outgoing interface,and each RouteEntry can be provisioned with up to256 outgoing interfaces.

Class NA

Presence required

Visibility customer

Range Vr Pp IpPort LogicalIf


Initial value N.A.

574


141 InwTosMap (TosMap)






Parents:

EM - Vr - Ip - Pg - Policy - TosMap

Child(ren):

-

Identifiers:

-

Links:


Parameters:

tos

Parameter name tos

Domain

Description This attribute specifies the list of byte values to becompared against the Differentiated Services (DS)field in the packet header (also known as the ToSfield) for selecting IP packets. See the description ofthe TosMap component for more information. Thisattribute must contain at least one value.

Class NA

Presence required

Visibility customer

Range [0..ff]

Data type Variable[256] List of Hex

575


Initial value N.A.

576


142 InwTrafficManagement (Tm)





Parents:

EM - AtmMpe - Ac - SrcPvc - Tm

Child(ren):

-

Identifiers:

-

Links:


Parameters:

atmServiceCategory


Domain

Description This attribute specifies the desired ATM service cat-egory for this connection.

Class NA

Presence required

Visibility customer

Range unspecifiedBitRate, rtVariableBitRate, nrtVariable-BitRate, constantBitRate


Initial value unspecifiedBitRate

peakCellRate

577


Parameter name peakCellRate

Domain

Description This attribute specifies the desired peak cell rate(PCR) in both directions for this connection. Referto NTP NN10600-705 for more information on ATMTraffic Management.

Class NA

Presence required

Visibility customer

Range [0..2147483647]

Data type Decimal

Initial value 0

578


143 InwVirtualMedia (Vm)






Parents:

EM - Vm

Child(ren):

If -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description VirtualMedia/n The VirtualMedia component repres-ents an instance of a logical media. VirtualMediaprovides IP connectivity between virtual routers onthe same module, and supports an 'always-up IP in-terface' concept; i.e interface stays up unless it isadministratively disabled or the hardware goesdown. VirtualMedia can be used to support inter-VRcommunication, or by BGP-4 to establish an 'al-ways-up IP interface'.

Class NA

579


Presence required

Visibility customer

Unit

Range [0..15]

Data Type Decimal

Initial Value

580


144 InwVrDiffServPhb (Phb)






Parents:

EM - Vr - Dsd - Phb

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Dsd/<enum> PerHopBehavior/<phb>Rtr/<string> Dsd/<enum> PerHopBehavior/<phb>Rtr/<string> Vrf/<string> Dsd/<enum> PerHopBeha-vior/<phb> The attributes of the PerHopBehaviorcomponent specify per- packet traffic managementparameters that control how individual packets areforwarded. A packet is associated with a PerHop-Behavior component instance by a packet classific-ation mechanism. For IP packets, the associatedPerHopBehavior component instance is equal to

581


the value of the six-bit Differentiated Services CodePoint (DSCP) field in the IP header. For MPLSpackets forwarded by a Label Switched Router(LSR) over a Label Switched Path (LSP) where anMplsServiceMap component is applied, the associ-ated PerHopBehavior component instance is equalto value of the perHopBehavior attribute of theMplsServiceMap ExperimentalBitsMap componentwhose instance is equal to the value of the three-bitExperimental (EXP) field of the MPLS label. If thePerHopBehavior component instance associatedwith a packet is not included among the existingPerHopBehavior subcomponents of the Differenti-atedServicesDomain, then the packet is treated ac-cording to the PerHopBehavior component whoseinstance is equal to 0. Each PerHopBehavior com-ponent instance is equal to a decimal value in therange from 0 to 63. The following pairs of PerHop-Behavior component instances values are equal:AF11 = 10, AF12 =12, AF13 =14, AF31 = 26, AF32= 28, AF33 = 30, AF21 = 18, AF22 = 20, AF23 = 22,AF41 = 34, AF42 =36, AF43 = 38 CS0 = 0, CS1 =8, CS2 =16, CS3 = 24, CS4 =32, CS5 = 40, CS6 =48, CS7 = 56, DF = 0, EF = 46. The first item ineach pair above is a Per Hop Behavior designationidentified in one of following IETF standards: RFC2764 ("DiffServ Field Definition in IPv4 and IPv6Headers"), RFC 2597 ("Assured Forwarding PHBGroup") or RFC 3246 ("An Expedited ForwardingPHB"). The the second item in each pair is the IETFrecommended Differentiated Services Code Point(DSCP) value. Each PerHopBehavior subcompon-ent of the DifferentiatedServicesDomain must havea unique instance value. A PerHopBehavior sub-component whose instance value is equal to 0 mustexist. A set of PerHopBehavior subcomponents isadded automatically when the DifferentiatedSer-vicesDomain component is created. The membersof this set is a function of the DifferentiatedSer-vicesDomain component instance as indicated be-low. Multiservice (ms): CS7, CS6, CS5, CS4, CS3,CS2, CS1, EF, AF41, AF42, AF43, AF31, AF32,AF33, AF21, AF22, AF23, AF11, AF12, AF13, DFClassSelector (cs): CS7, CS6, CS5, CS4, CS3,CS2, CS1, CS0 AssuredForwarding (af): CS6,AF41, AF42, AF43, AF31, AF32, AF33, AF21, AF22AF23, AF11, AF12, AF13, DF Packet Voice (pv):CS7, CS6, CS5, CS1, EF, AF11, AF12, AF13, DFWirelessUmts (umts): CS7, CS6, CS1, EF, AF31,AF32, AF33, AF21, AF22, AF23, DF Custom (cu):CS6, DF

582


Class NA

Presence required

Visibility customer

Unit

Range 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42,43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55,56, 57, 58, 59, 60, 61, 62, 63, df, ef, af11, af12,af13, af21, af22, af23, af31, af32, af33, af41, af42,af43, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7


Initial Value

dropPrecedence

Parameter name dropPrecedence

Domain

Description This attribute specifies the drop precedence valuegiven to a packet that uses the PerHopBehaviorcomponent instance. This value is used to select acongestion threshold when the packet is placed ona queue that supports multiple congestionthresholds. A drop precedence is assigned to apacket to control its loss sensitivity relative to otherpackets when the packets are placed into the samequeue. Generally, the low value indicates the pack-et is less likely to be discarded when the queue iscongested. This traffic has a higher probability ofbeing forwarded. The high value indicates the pack-et is more likely to be discarded when the queue iscongested. This traffic has a lower probability of be-ing forwarded. The actual loss sensitivity of packetsdepends on the discarding mechanism at thequeue. This attribute is set automatically to a de-fault value according to a function of the PerHopBe-havior component instance value when the PerHop-Behavior component is created. The default valuesare listed below. ---------

583


------------------------------------------------------------------------PerHopBehavior dropPrecedence ---------------------------------------------------------------------------------CS7 (56) low CS6 (48) low EF (46) low CS5 (40)low CS4 (32) low AF41 (34) low AF42 (36) mediumAF43 (38) high CS3 (24) low AF31 (26) low AF32(28) medium AF33 (30) high CS2 (16) low AF21(18) low AF22 (20) medium AF23 (22) high CS1 (8)low AF11 (10) low AF12 (12) medium AF13 (14)high CS0, DF (0) high all others high

Class NA

Presence optional

Visibility customer

Range low, medium, high


Initial value N.A.

trafficClass

Parameter name trafficClass

Domain

Description This attribute specifies the TrafficClass componentinstance associated with the PerHopBehavior com-ponent instance. This attribute allows PerHopBeha-vior component instances to be aggregated intogroups that specify the same packet schedulingcharacteristics. This attribute is set automatically toa default value according to a function of the Per-HopBehavior component instance value when thePerHopBehavior component is created. The defaultvalues are listed below. ---

584


------------------------------------------------------------------------------PeHopBehavior trafficClass ---------------------------------------------------------------------------------CS7 (56) critical CS6 (48) network EF (46) premiumCS5 (40) premium CS4 (32) platinum AF41 (34)platinum AF42 (36) platinum AF43 (38) platinumCS3 (24) gold AF31 (26) gold AF32 (28) gold AF33(30) gold CS2 (16) silver AF21 (18) silver AF22 (20)silver AF23 (22) silver CS1 (8) bronze AF11 (10)bronze AF12 (12) bronze AF13 (14) bronze CS0,DF (0) standard all others standard The value ofthis attribute must be equal to an existing Traffic-Class subcomponent instance of the Differentiated-ServicesDomain. If the PerHopBehavior componentinstance is 0, cs0, or df, then the value of this attrib-ute must be standard.

Class NA

Presence optional

Visibility customer

Range critical, network, premium, platinum, gold, silver,bronze, standard


Initial value N.A.

585


145 InwVrDiffServTc (Tc)






Parents:

EM - Vr - Dsd - Tc

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> Dsd/<enum> TrafficClass/<tc> Rtr/<string> Dsd/<enum> TrafficClass/<tc> Rtr/<string>Vrf/<string> Dsd/<enum> TrafficClass/<tc> The at-tributes of the TrafficClass component specify per-packet traffic management parameters that controlhow individual packets are forwarded. A packet isassociated with a TrafficClass component instanceaccording to the trafficClass provisioned attribute ofthe PerHopBehavior component instance the pack-et is using. See the description of the PerHopBeha-

586


vior component for an explanation of how PerHop-Behavior component instances are associated withpackets. The DifferentiatedServicesDomain musthave a TrafficClass/ standard subcomponent in-stance. Each of the TrafficClass component in-stances should be referenced by at least one of theDifferentiatedServicesDomain PerHopBehaviorcomponent instances.

Class NA

Presence required

Visibility customer

Unit

Range critical, network, premium, platinum, gold, silver,bronze, standard


Initial Value

schedulingClass4Queues

Parameter name schedulingClass4Queues

Domain

Description This attribute specifies a logical scheduling classvalue in the range from 0 to 3 given to a packet thatuses the TrafficClass component instance. Thisvalue is used to select a queue when the packet istransmitted at an interface that supports fourqueues per connection. It may also be used to se-lect one of up to four link layer connections at inter-faces where per-packet selection of egress connec-tions is supported. A scheduling class is assignedto a packet to control its scheduling behavior relat-ive to other packets at the interface where the pack-ets are transmitted. Generally, a numerically highervalue indicates the packet is less likely to bedelayed. This traffic is considered more urgent andless delay tolerant. A numerically lower value indic-ates the packet is more likely to be delayed. Thistraffic is considered less urgent and more delay tol-erant. The actual scheduling behavior of packetsdepends on the scheduling mechanism at the inter-face. This value is also used to select a one of up tofour Layer 2 connections at the interface where thepacket is transmitted. Per- packet selection ofegress connections is supported only if these condi-tions are all true: i) for the Vr component, the valueof the associated mediaType attribute under the Ip-Port component is frameRelay, atmMpeLlcEncap,

587


or atmMpeVcEncap; for Router and Vrf, the mediaassociated with the interface is AtmMpe or IpoDlci.ii) more than one Layer 2 connection is configuredto the next hop IP router, and iii) each connection isconfigured with a different connection class value.Normally the packet is transmitted on the connec-tion whose connection class is equal to the schedul-ingClass4Queues value given to the packet. If thatconnection does not exist, then the connection hav-ing the next lower connection class is used. If thatconnection does not exist also, then the connectionhaving the next higher connection class is used.Locally generated IP multicast and IP broadcastpackets are not eligible for per-packet selection ofegress connections. Each of these packets iscopied and transmitted individually on each of theavailable connections to the next hop IP router. ForAtmMpe, the connection class is specified by the ip-Cos attribute of the AtmConnection subcomponent.For FrDte the connection class is specified by theipCos attribute of the StaticDlci and DynamicDlciDefsubcomponents. For IpDlciGroup and IpoDlci theconnection class is specified by the ipCos attributeof the FrConnection subcomponent. If each Layer 2connection is configured to provide different policingand scheduling characteristics, then the forwardingbehaviors of IP and MPLS packets are differenti-ated as they transit through the Layer 2 network. Ingeneral, the scheduling characteristics of the con-nections should be configured to be better for nu-merically greater connection class values. For ex-ample, if four AtmConnection components are as-sociated with AtmIf components configured for ATMservice classes UBR, nrtVBR, rtVBR, and CBR,then the ipCos attributes of the AtmConnectioncomponents should be either 0,1,2, and 3, respect-ively, or 0,1,3, and 2 respectively. The scheduling-Class4Queues attribute is set automatically to a de-fault value according to a function of the Traffic-Classcomponent instance value when the Traffic-Class component is created. The default values arelisted below. If the TrafficClass component instanceis standard, then this attribute must be set to 0. De-fault values for all domains, except assuredFor-warding (af): -------

588


--------------------------------------------------------------------------TrafficClass schedulingClass4Queues ---------------------------------------------------------------------------------critical 2 premium 3 network 2 platinum 1 gold 1 sil-ver 1 bronze 1 standard 0 Default values for as-suredForwarding (af) domain only: ---------------------------------------------------------------------------------TrafficClass schedulingClass4Queues ---------------------------------------------------------------------------------critical 2 premium 3 network 2 platinum 3 gold 2 sil-ver 1 bronze 0 standard 0

Class NA

589


Presence optional

Visibility customer

Range [0..3]

Data type Decimal

Initial value N.A.

schedulingClass8Queues

Parameter name schedulingClass8Queues

Domain

Description This attribute specifies a logical scheduling classvalue in the range from 0 to 7 given to a packet thatuses the TrafficClass component instance. Thisvalue is used to select a queue when the packet istransmitted at an interface that supports eightqueues per connection. A scheduling class is as-signed to a packet to control its scheduling behaviorrelative to other packets at the interface where thepackets are transmitted. Generally, a numericallyhigher value indicates the packet is less likely to bedelayed. This traffic is considered more urgent andless delay tolerant. A numerically lower value indic-ates the packet is more likely to be delayed. Thistraffic is considered less urgent and more delay tol-erant. The actual scheduling behavior of packetsdepends on the scheduling mechanism at the inter-face. This attribute is set automatically to a defaultvalue according to a function of the Traffic-Classcomponent instance value when the Traffic-Class component is created. The default values arelisted below. If the TrafficClass component instanceis standard, then this attribute must be set to 0. ---------------------------------------------------------------------------------TrafficClass schedulingClass8Queues ----

590


-----------------------------------------------------------------------------critical 7 premium 6 network 5 platinum 4 gold 3 sil-ver 2 bronze 1 standard 0

Class NA

Presence optional

Visibility customer

Range [0..7]

Data type Decimal

Initial value N.A.

591


146 InwVrDifferentiatedServicesDomain (Dsd)






Parents:

EM - Vr - Dsd

Child(ren):

Phb - Tc -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Vr/<string> DifferentiatedServicesDomain/<enum>Rtr/<string> DifferentiatedServicesDomain/<enum>Rtr/<string> Vrf/<string> DifferentiatedServicesDo-main/<enum> This component and its supcompon-ents represent a Differentiated Services administra-tion domain for traffic management and congestioncontrol. The DifferentiatedServicesDomain compon-ent instance identifies the domain type. The follow-ing domain types are available: Multiservice (ms)ClassSelector (cs) AssuredForwarding (af) Packet-

592


Voice (pv) WirelessUmts (umts) Custom (cu) TheDifferentiatedServicesDomain component is an op-tional subcomponent of the Router, VpnRouteFor-warder and VirtualRouter components. The Router,VpnRouteForwarder, and VirtualRouter compon-ents can have at most one DifferentiatedServices-Domain subcomponent. If a Router componentdoes not have a DifferentiatedServicesDomain sub-component, then the Router operates as by defaultas follows. IP packets with Differentiated Service-Code Point (DSCP) field value 48, and MPLS pack-ets with Experimental Bits (EXP) field value 6, aretreated with Per Hop Behavior (PHB) CS6; other IPand MPLS packets are treated with PHB DF for de-fault forwarding. Locally generated routing controlpackets are treated with PHB CS6; other locallygenerated packets are treated with PHB DF. PerHop Behaviors CS6 and DF are configured toprovide the following values of scheduling class for8, 4, 3, 2 queues, drop precedence, and EXP forMPLS encapsulation: (5, 2, 2, 0, low, 6) and (0, 0,0, 0,, high, 0), respectively. This is equivalent to thedefault the configuration of the DifferentiatedSer-vicesDomain/custom component instance. If a Vpn-RouteForwarder component does not have a Differ-entiatedServicesDomain subcomponent, then theVpnRouteForwarder component uses the Differenti-atedServicesDomain configuration of the Router.

Class NA

Presence required

Visibility customer

Unit

Range multiservice, classSelector, assuredForwarding,packetVoice, wirelessUmts, custom


Initial Value

phbGeneralSource

Parameter name phbGeneralSource

Domain

Description This attribute indicates the PerHopBehavior com-ponent instance that controls the forwarding behavi-or of each locally generated packet that is not usedfor network routing control. For a locally-generatedIP packet that is not used for network routing con-trol, the Differentiated Services Code Point (DSCP)

593


field of the packet is set equal to this attribute value.For a locally-generated ICMP echo request packet,the DSCP field is overridden by the -tos or -dscpoption of the Ping command. For a locally-gen-erated ICMP echo reply packet, the DSCP field isset to the DSCP value contained in the IP header ofthe received request packet. In any case, the for-warding behavior of the ICMP packet controlled bythe PerHopBehavior component instance that isequal to value of the DSCP field.

Class NA

Presence required

Visibility customer

Range { [0..63],df, af11, af12, af13, af21, af22, af23, af31,af32, af33, af41, af42, af43, ef, cs0, cs1, cs2, cs3,cs4, cs5, cs6, cs7 }


Initial value df

phbRoutingSource

Parameter name phbRoutingSource

Domain

Description This attribute indicates the PerHopBehavior com-ponent instance that controls the forwarding behavi-or of each locally generated packet that is used fornetwork routing control. For a locally generated IPpacket that is used for network routing control, theDifferentiated Services Code Point (DSCP) field ofthe packet is set equal to this attribute value.

Class NA

Presence required

Visibility customer

Range { [0..63],df, af11, af12, af13, af21, af22, af23, af31,af32, af33, af41, af42, af43, ef, cs0, cs1, cs2, cs3,cs4, cs5, cs6, cs7 }


Initial value cs6

594


147 IpLink (IpLk)






Parents:

EM - Iur - IuUplane - IpLk

EM - Iub - IuUplane - IpLk

EM - Iucs - IuUplane - IpLk

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


linkToIpIf IpIf

Parameters:

rdnId


Domain

Description Iucs/n Uplane IpLk/n Iur/n Uplane IpLk/n Iub/n Up-lane IpLk/n This component represents the UplaneIP link/n aspects of this Iucs or Iur or Iub.

Class NA

595


Presence required

Visibility customer

Unit

Range [1..10]

Data Type Decimal

Initial Value

linkToIpIf

Parameter name linkToIpIf

Domain

Description This attribute specifies the link to one IpIf which theinterface uses.

Class NA

Presence required

Visibility customer

Range IpIf


Initial value N.A.

596


148 Ismlc (Smlc)






Parents:

EM - Smlc

Child(ren):

Srs -

Identifiers:

-

Links:


Parameters:

gpsNavDataTimer

Parameter name gpsNavDataTimer

Domain

Description This attribute represents the time to wait beforechecking the reception of the periodic GPS naviga-tion data messages. This GPS data message shallbe received every 6 seconds.

Class NA

Presence required

Visibility customer

Range [7..100]

Data type Decimal

Initial value 50

597


primaryIsmlcIp

Parameter name primaryIsmlcIp

Domain

Description This attribute represents the primary IP addressesof the iSMLC application (source address). If SRStraffic is routed via the OAM sub-network usingcommon virtual router, the external iSMLC IP ad-dress shall be identical to the external IP addressused for OAM traffic.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

secondaryIsmlcIp

Parameter name secondaryIsmlcIp

Domain

Description This attribute represents the secondary IP ad-dresses of the iSMLC application (source address).If SRS traffic is routed via the OAM sub-network us-ing common virtual router, the external iSMLC IPaddress shall be identical to the secondary IP ad-dress used for OAM traffic.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

srsLinkRetryTimer

Parameter name srsLinkRetryTimer

Domain

Description This attribute represents the time the RNC/GADSapplication waits until it re-initiates the connection tothe SRS server.

598


Class NA

Presence required

Visibility customer

Range [1..120]

Data type Decimal

Initial value 5

srsStartupTimer

Parameter name srsStartupTimer

Domain

Description Timer to supervise the correct start-up of the SRS.If valid data is not received with the time intervaldefined by this attribute the alternate SRS server, ifprovisioned, will be used and an alarm will beraised.

Class NA

Presence required

Visibility customer

Range [30..100]

Data type Decimal

Initial value 60

599


149 IsmlcSatelliteReferenceSystem (Srs)






Parents:

EM - Smlc - Srs

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Smlc Srs/n This component represents the GPSSatellite Reference System.

Class NA

Presence required

Visibility customer

Unit

Range [1..2]

600


Data Type Decimal

Initial Value

port

Parameter name port

Domain

Description This attribute specifies the port number for the SRSIP connection.

Class NA

Presence required

Visibility customer

Range [0..65535]

Data type Decimal

Initial value 0

srsIp

Parameter name srsIp

Domain

Description This attribute represents the external IP address ofthe SRS access point. A value of 0.0.0.0 for this at-tribute means will instruct the application to discon-nect from the SRS server, if connected, or no con-nection attempt will be made.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

601


150 IuBc (IuBc)






Parents:

EM - IuBc

Child(ren):

Sig -

Identifiers:

-

Links:


Parameters:

602


151 IuBcSignallingBearer (Sig)





Parents:

EM - IuBc - Sig

Child(ren):

Cbs -

Identifiers:

-

Links:


Parameters:

603


152 IuBcSignallingBearerCbs (Cbs)





Parents:

EM - IuBc - Sig - Cbs

Child(ren):

CbcIp -

Identifiers:

-

Links:


Parameters:

niIp

Parameter name niIp

Domain

Description This attribute specifies the IP address of the CellBroadcast Services (CBS) of the RNC. This is theIP address used by the Cell Broadcast Center(CBC) to reach the CBS of the RNC. A static routeis needed to route the traffic to the localmediamoveable IP address of the CBS which is"127.254.1.1".

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


604


Initial value N.A.

retryTimer

Parameter name retryTimer

Domain

Description This attribute specifies the time to wait before at-tempting to setup the TCP connection to the CellBroadcast Center (CBC) after the setup of the con-nection failed. The timer is started when an attemptto setup the TCP connection to the CBC failed. Thetimer is stopped when a TCP connection to theCBC is established. Upon expiry, another setup of aTCP connection to the CBC is attempted.

Class NA

Presence required

Visibility customer

Range [1..30]

Data type Decimal

Initial value 5

605


153 IuBcSignallingBearerCbsCbcIp (CbcIp)






Parents:

EM - IuBc - Sig - Cbs - CbcIp

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description IuBc Sig Cbs CbcIp/n This component representsone of the Cell Broadcast Center (CBC) IP addressfor the IuBc Sig Cbs on the RNC.

Class NA

Presence required

Visibility customer

Unit

Range [1..2]

606


Data Type Decimal

Initial Value

cbcIp

Parameter name cbcIp

Domain

Description This attribute specifies one of the IP address of theCell Broadcast Center (CBC) server.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

607


154 IuPc (IuPc)






Parents:

EM - IuPc

Child(ren):

SignallingBearer -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description IuPc This component represents the interface usedfor terminating PCAP messaging from the SAS forA-GPS services.

Class NA

Presence required

Visibility customer

Unit

Range [1..1]

608


Data Type Decimal

Initial Value

609


155 IuPcSignallingBearer (SignallingBearer)






Parents:

EM - IuPc - SignallingBearer

Child(ren):

Tal -

Identifiers:

-

Links:


Parameters:

610


156 IuPcSignallingBearerTal (Tal)






Parents:

EM - IuPc - SignallingBearer - Tal

Child(ren):

TalIp -

Identifiers:

-

Links:


Parameters:

niIp

Parameter name niIp

Domain

Description This attribute represents a list of IP addresses forthe Network Interface.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

611


rxHeartbeatInterval

Parameter name rxHeartbeatInterval

Domain

Description This attribute represents the time, in seconds, thatthe NI waits to receive Heartbeat signals or any oth-er transmission from the SAS IP's. If this limit is ex-ceeded, the NI presumes the connection has beenlost and attempts a reconnect.

Class NA

Presence required

Visibility customer

Range [0.0..600.0]

Data type Decimal

Initial value 2.0

txHeartbeatInterval

Parameter name txHeartbeatInterval

Domain

Description This attribute represents the time, in seconds, thatthe NI waits to send Heartbeat signals to the SASIP's. Setting this attribute to 0.0 disables the Heart-beat on the NI.

Class NA

Presence required

Visibility customer

Range [0.0..600.0]

Data type Decimal

Initial value 0.5

612


157 IuPcSignallingBearerTalTalIp (TalIp)






Parents:

EM - IuPc - SignallingBearer - Tal - TalIp

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description IuPc SignallingBearer Tal TalIp/n This componentrepresents a specific SAS IP address for the IuPcSignallingBearer Tal on the RNC.

Class NA

Presence required

Visibility customer

Unit

Range [1..6]

613


Data Type Decimal

Initial Value

ipPortNumber

Parameter name ipPortNumber

Domain

Description This attribute specifies port number for the SAS IPconnection.

Class NA

Presence required

Visibility customer

Range [1..65535]

Data type Decimal

Initial value 9521

preferenceNumber

Parameter name preferenceNumber

Domain

Description This attribute represent the weight given to this SASIP for load balancing purposes. It is the the range 1through 5, with 1 being the highest priority and 5being the lowest. Default value is 3.

Class NA

Presence required

Visibility customer

Range [1..5]

Data type Decimal

Initial value 3

sasIp

Parameter name sasIp

Domain

Description This attribute specifies IP address for the SAS con-nection.

Class NA

Presence required

614


Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

615


158 IuPsIf (IuPs)






Parents:

EM - IuPs

Child(ren):

IuPsUplane -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description IuPsIf/n This component specifies the parametersfor an Iu-PS Interface. Iu- PS is the interfacebetween RNC and the packet-switched domain ofthe CN.

Class NA

Presence required

Visibility customer

Unit

616


Range [1..24]

Data Type Decimal

Initial Value

commentText


Domain

Description This attribute specifies an arbitrary string whoseuse is left to the discretion of the system adminis-trator. It is not used by the system. For example,this attribute could be used to specify the SGSN en-dpoint which is logically connected to this IuPs in-terface.

Class NA

Presence required

Visibility customer

Range [0..60]


Initial value

gtpEchoEnabled

Parameter name gtpEchoEnabled

Domain

Description This attribute specifies whether the echo requestfunctionality of this IuPsIf instance is enabled or dis-abled.

Class NA

Presence required

Visibility customer




gtpEchoReqAttempts

Parameter name gtpEchoReqAttempts

Domain

Description This attribute specifies the maximum number of

617


times that the RNC will send Gtp Echo Requests tothe SGSN addresses. This attribute corresponds toN3-RESPONSE in 3GPP TS 29.060.

Class NA

Presence required

Visibility customer

Range [1..60]

Data type Decimal

Initial value 5

gtpEchoReqInterval

Parameter name gtpEchoReqInterval

Domain

Description This attribute specifies the frequency with which theRNC sends Gtp Echo Request messages to SGSNaddresses.

Class NA

Presence required

Visibility customer

Range [1..60]

Data type Decimal

Initial value 1

gtpEchoRspTime

Parameter name gtpEchoRspTime

Domain

Description This attribute specifies the time that the RNC waitsto receive the Gtp Echo Response, after it sendsout the Gtp Echo Request. If this limit is exceeded,the RNC sends another Gtp Echo Request to theSGSN until a Gtp Echo Response is received or thevalue of echoReqAttempts attribute is reached. Thisattribute corresponds to T3-RESPONSE in 3GPPTS 29.060.

Class NA

Presence required

Visibility customer

Range [1..60]

Data type Decimal

618


Initial value 2

619


159 IuPsUplane (IuPsUplane)





Parents:

EM - IuPs - IuPsUplane

Child(ren):

SgsnSubnet -

Identifiers:

-

Links:


Parameters:

620


160 IubIf (Iub)






Parents:

EM - Iub

Child(ren):

IuUplane - Sig - Stp -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Iub/n This component represents an Iub interface. Itis the interface between the RNC and the NodeB.

Class NA

Presence required

Visibility customer

Unit

Range [1..16383]

621


Data Type Decimal

Initial Value

commentText


Domain

Description This attribute specifies an arbitrary string whoseuse is left to the discretion of the system adminis-trator. It is not used by the system. For example,this attribute could be used to specify the name ofthe Node B which is connected to this interface.

Class NA

Presence required

Visibility customer

Range [0..60]


Initial value

oamTrafficInterface

Parameter name oamTrafficInterface

Domain


Class NA

Presence required

Visibility customer

Range [0..64]


Initial value

serviceGroupId

Parameter name serviceGroupId

Domain

Description This attribute specifies which service group this Iubinterface is assigned to. All IubIfs provisioned withthe same serviceGroupId will be processed by the

622


same pair of CMU processors. The serviceGroupIdprovisioned on this IubIf must match the service-GroupId configured on the Rnc NodeB managedobject.

Class NA

Presence required

Visibility customer

Range [0..71]

Data type Decimal

Initial value 0

623


161 IubIfDstPvc (DstPvc)






Parents:

EM - Iub - Sig - SaalUni - DstPvc

EM - Aal2If - Alcap - SaalUni - DstPvc

Child(ren):

-

Identifiers:

-

Links:


Parameters:

624


162 IubIfSpvcTerminationPoint (Stp)






Parents:

EM - Iub - Stp

Child(ren):

-

Identifiers:

-

Links:


Parameters:

softPvcRetryPeriod


Domain


Class NA

Presence required

Visibility customer

Range [10..3600]

Data type Decimal

Initial value 20

625


626


163 IubIfSrcPvc (SrcPvc)






Parents:

EM - Iub - Sig - SaalUni - SrcPvc

EM - Aal2If - Alcap - SaalUni - SrcPvc

Child(ren):

Tm -

Identifiers:

-

Links:


Parameters:

calledAddress


Domain


Class NA

Presence required

Visibility customer

Range [40..40]

Data type HexString

Initial value N.A.

627


calledVpiVci


Domain

Description If the destination endpoint is an AtmIf Vcc, this at-tribute specifies the called VPI.VCI of the destina-tion AtmIf Vcc. The default value is a value of 0.0and have a format of [0-4095].[0-65535] .

Class NA

Presence required

Visibility customer

Range { [0..4095],[0..65535], }


Initial value N.A.

628


164 IubIfTrafficManagement (Tm)





Parents:

EM - Iub - Sig - SaalUni - SrcPvc - Tm

EM - Aal2If - Alcap - SaalUni - SrcPvc - Tm

Child(ren):

-

Identifiers:

-

Links:


Parameters:

atmServiceCategory


Domain

Description This attribute specifies the desired ATM service cat-egory for this connection..

Class NA

Presence required

Visibility customer




629


rxTrafficDescParm


Domain

Description This attribute is a vector of five traffic parameterswhose meanings are defined by the rxTrafficDesc-Type attribute. If the value of the rxTrafficDescTypeattribute is sameAsTx, the values provisioned in thisattribute are ignored. The traffic parameters for thereceive direction are taken from the txTraffic-DescParm attribute. The values of peak cell rate(PCR), sustained cell rate (SCR), and Minimum CellRate (MCR) are expressed in cell/s. Maximum burstsize (MBS) is expressed in cells. The value of CD-VT is expressed in microseconds. The values ofPCR, SCR, MCR, MBS and CDVT are used for us-age parameter control (UPC). When rxTrafficDesc-Type is 1 or 2, all of the parameters must be set tozero (unused). When rxTrafficDescType is 3, para-meter 1 represents the PCR for CLP equal to 0 and1 traffic; and parameter 4 represents the CDVT.Parameter 1 must be non-zero. Parameters 2 and 3must be set to zero (unused). When rxTrafficDesc-Type is 4, parameter 1 represents the PCR for CLPequal to 0 and 1 traffic; parameter 2 represents thePCR for CLP equal to 0 traffic with cell discard; andparameter 4 represents the CDVT. Parameters 1and 2 must be non-zero. Parameter 3 must be setto zero (unused). Parameter 1 must be greater thanor equal to parameter 2. When rxTrafficDescType is5, parameter 1 represents the PCR for CLP equalto 0 and 1 traffic; parameter 2 represents the PCRfor CLP equal to 0 traffic with cell tagging; and para-meter 4 represents the CDVT. Parameters 1 and 2must be non-zero. Parameter 3 must be set to zero(unused). Parameter 1 must be greater than orequal to parameter 2. When rxTrafficDescType is a6, parameter 1 represents the PCR for CLP equalto 0 and 1 traffic; parameter 2 represents the SCRfor CLP equal to 0 and 1 traffic; parameter 3 repres-ents the MBS for CLP equal to 0 and 1 traffic; andparameter 4 represents the CDVT. Parameters 1, 2and 3 must be non-zero. Parameter 1 must begreater than or equal to Parameter 2. When rxTraf-ficDescType is 7, parameter 1 represents the PCRfor CLP equal to 0 and 1 traffic; parameter 2 repres-ents the SCR for CLP equal to 0 traffic with cell dis-card; parameter 3 represents the MBS for CLPequal to 0 traffic; and parameter 4 represents theCDVT. Parameters 1, 2 and 3 must be non-zero.

630


Parameter 1 must be greater than or equal to para-meter 2. When rxTrafficDescType is 8, parameter 1represents the PCR for CLP equal to 0 and 1 traffic;parameter 2 represents the SCR for CLP equal to 0traffic with cell tagging; parameter 3 represents theMBS for CLP equal to 0 traffic; and parameter 4represents the CDVT. Parameter 1, 2 and 3 mustbe non-zero. Parameter 1 must be greater than orequal to parameter 2. When rxTrafficDescType is 9,parameter 1 represents the PCR; parameter 2 rep-resents the CDVT; parameter 3 represents theMCR. Parameter 4 is not used and must be zero.Parameter 1 must be non- zero and must be great-er than or equal to parameter 3. Parameter 3 mayoptionally be zero. If the value of CDVT either inparameter 2 or in parameter 4 is zero, the CDVT istaken from the CA defaults for the particular atm-ServiceCategory of this connection. Parameter 5 ofthe rxTrafficDescParm is always unused. When rx-TrafficDescriptorType is 3 through 8, there are cer-tain extreme combinations of rxTrafficDescParmwhich are outside the capabilities of the UPC hard-ware. The check prov command detects such casesand generates an error message. If this happens,adjust the parameters until they fall within the sup-ported limits. To calculate the limits, use the follow-ing formulae: I1 = 1,000,000,000 / PCR L1 = CDVT* 1000 I2 = 1,000,000,000 / SCR L2 = CDVT +(MBS - 1) * (I2 - I1) Note that I2 and L2 only applywhen the rxTrafficDescriptorType is 6 through 8.For 16pOC3SmIrAtm card, L2 must be less than orequal to 2,674,011,406. For 16pOC3PosAtm card,L2 must be less than or equal to 17,179,869,180.

Class NA

Presence required

Visibility customer

Range [0..2147483647]



rxTrafficDescType


Domain

Description This attribute specifies the type of traffic manage-ment which is applied to the receive direction of thisconnection as defined in the ATM Forum. The rx-

631


TrafficDescType determines the number and mean-ing of the parameters in the rxTrafficDescParm at-tribute. The value sameAsTx means the rxTraffic-DescType as well as the rxTrafficDescParm attrib-ute values are taken from the values of the txTraf-ficDescType and txTrafficDescParm attributes.

Class NA

Presence required

Visibility customer

Range 1, 2, 3, 4, 5, 6, 7, 8, 9, sameAsTx



txTrafficDescParm


Domain

Description This attribute is a vector of five traffic parameterswhose meanings are defined by the txTrafficDesc-Type attribute. The values of peak cell rate (PCR),sustained cell rate (SCR), Minimum Cell Rate(MCR) and requested shaping rate are expressedin cell/s. Maximum burst size (MBS) is expressed incells. CDVT is expressed in microseconds. The val-ues of PCR, SCR, MCR, MBS and CDVT are usedfor connection admission control (CAC). The valueof CDVT is only used for connections where theatmServiceCategory is constantBitRate. For all oth-er values of atmServiceCategory, CDVT is ignored.The values of PCR, SCR, MCR and requestedshaping rate are used to determine the actual shap-ing rate where traffic shaping is enabled. When tx-TrafficDescType is 1 or 2, all of the parametersmust be set to zero. When txTrafficDescType is 3,parameter 1 represents the PCR for CLP equal to 0and 1 traffic; parameter 4 represents the CDVT;and parameter 5 represents the requested shapingrate. A non-zero value in parameter 5 overrides anyvalue in parameter 1. This result is used as thePCR. Parameter 1 must be non-zero. Parameters 2and 3 must be zero. When txTrafficDescType is 4,parameter 1 represents the PCR for CLP equal to 0and 1 traffic with cell discard; parameter 2 repres-ents the PCR for CLP equal to 0 traffic; parameter 4represents the CDVT; and parameter 5 representsthe requested shaping rate. A non-zero value inparameter 5 overrides any value in parameter 1.

632


This result is used as the PCR. Parameter 1 mustbe greater than or equal to parameter 2. Paramet-ers 1 and 2 must be non-zero. Parameter 3 must bezero. When txTrafficDescType is 5, parameter 1represents the PCR for CLP equal to 0 and 1 trafficwith cell tagging; parameter 2 represents the PCRfor CLP equal to 0 traffic; parameter 4 representsthe CDVT; and parameter 5 represents the reques-ted shaping rate. A non-zero value in parameter 5overrides any value in parameter 1. This result isused as the PCR. Parameter 1 must be greaterthan or equal to parameter 2. Parameters 1 and 2must be non-zero. Parameter 3 must be zero.When txTrafficDescType is 6, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0 and1 traffic; parameter 3 represents the MBS for CLPequal to 0 and 1 traffic; parameter 4 represents theCDVT; and parameter 5 represents the requestedshaping rate. A non-zero value in parameter 5 over-rides any value in parameter 1. This result is usedas the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal toparameter 2. Parameter 5, must either be zero(unused) or greater than or equal to parameter 2.When txTrafficDescType is 7, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0 withcell discard; parameter 3 represents the MBS forCLP equal to 0 traffic; parameter 4 represents theCDVT; and parameter 5 represents the requestedshaping rate. A non-zero value in parameter 5 over-rides any value in parameter 1. This result is usedas the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal toparameter 2. Parameter 5, must either be zero(unused) or greater than or equal to parameter 2.When txTrafficDescType is 8, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0traffic with cell tagging; parameter 3 represents theMBS for CLP equal to 0 traffic; parameter 4 repres-ents the CDVT; and parameter 5 represents the re-quested shaping rate. A non-zero value in paramet-er 5 overrides any value in parameter 1. This resultis used as the PCR. Parameters 1, 2 and 3 must benon-zero. Parameter 1 must be greater than orequal to parameter 2. Parameter 5, must either bezero (unused) or greater than or equal to parameter2. When txTrafficDescType is 9, parameter 1 rep-resents the PCR; parameter 2 represents the CD-

633


VT; parameter 3 represents the MCR; parameter 4and parameter 5 represent are not used and mustbe zero. Parameter 1 must be non-zero and mustbe greater than or equal to parameter 3. Parameter3 may be optionally zero. Whenever it is valid forPCR to be specified, parameter 5 may also be usedto specify a requested shaping rate. A non-zerovalue in parameter 5 overrides the value in para-meter 1 and is used as the peak cell rate in calcula-tions of CAC and shaping rate. When the atmSer-viceCategory is availableBitRate (ABR), the shap-ing rate is dynamically chosen, based on the ABRflow control mechanism, as a value between theMCR and the PCR or the requested shaping rate ifapplicable. For txTrafficDescType 3, 4 and 5, thetransmit traffic is shaped at the next available shap-ing rate less than the PCR. For txTrafficDescType6, 7 and 8 if linear traffic shaping is selected, thetransmit traffic is shaped at the highest availablerate which is between PCR and SCR. However, ifthere is no available shaping rate between PCRand SCR, traffic is shaped at the next rate abovethe PCR. For txTrafficDescType 6, 7 and 8 if in-verse-UPC traffic shaping is selected, the transmittraffic is shaped at a variable rate which conformsto the PCR, SCR and MBS of the connection trafficdescriptor.

Class NA

Presence required

Visibility customer

Range [0..2147483647]



txTrafficDescType


Domain


Class NA

Presence required

634


Visibility customer

Range 1, 2, 3, 4, 5, 6, 7, 8, 9


Initial value 6

635


165 IucsIf (Iucs)






Parents:

EM - Iucs

Child(ren):

IuUplane -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Iucs/n This component represents an Iucs inter-face.It is the CS interface between the RNC and theCore Network.

Class NA

Presence required

Visibility customer

Unit

Range [1..24]

636


Data Type Decimal

Initial Value

commentText


Domain

Description This attribute specifies an arbitrary string whoseuse is left to the discretion of the system adminis-trator. It is not used by the system. For example,this attribute could be used to specify the name ofthe Core Network which is connected to this inter-face.

Class NA

Presence required

Visibility customer

Range [0..60]


Initial value

637


166 IupsSgsnSubnet (SgsnSubnet)






Parents:

EM - IuPs - IuPsUplane - SgsnSubnet

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description IuPsIf/n IuPsUplane SgsnSubnet/<subnetAddress>,<subnetMask> This componentcontains the SGSNsubnet and SGSNnetmask thatspecifies the SGSN endpoint this IuPs instance islogically connected to. This information can be usedby WPS to ensure provisioning consistency. Inform-ation is stored but unused by the RNC.

Class NA

Presence required

638


Visibility customer

Unit

Range [0..255].[0..255].[0..255].[0..255],[0..255].[0..255].[0..255].[0..255]

Data Type Ip4Address,Ip4Address

Initial Value

639


167 IurIf (Iur)






Parents:

EM - Iur

Child(ren):

IuUplane -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Iur/n This component represents an Iur interface. Itis the interface between the RNC and a Neighbor-ing RNC.

Class NA

Presence required

Visibility customer

Unit

Range [1..200]

640


Data Type Decimal

Initial Value

commentText


Domain

Description This attribute specifies an arbitrary string whoseuse is left to the discretion of the system adminis-trator. It is not used by the system. For example,this attribute could be used to specify the name ofthe remote RNC which is connected to this inter-face.

Class NA

Presence required

Visibility customer

Range [0..60]


Initial value

641


168 IuxIfPath (Path)






Parents:

EM - IpIf - BwPool - Path

EM - Aal2If - BwPool - Path

EM - Aal2If - Path

Child(ren):


Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Aal2If/n Path/n Aal2If/n Path/n and Aal2If/n BwPool/n Path/n This component represents an ATM AAL2path within this UTRAN interface. Each path is as-sociated with an ATM PVC endpoint.

Class NA

Presence required

642


Visibility customer

Unit

Range [1..65535]

Data Type Decimal

Initial Value

pathOwner

Parameter name pathOwner

Domain

Description This attribute is used to select the owner of the pathaccording to Q.2630.1. On a path between twoRNC nodes, this attribute is used to select the orderof CID allocation to reduce the probability of colli-sions. The RNC node which is configured as theowner of this path allocates CIDs from 8 upwards.The RNC node which is not configured as the own-er of this path allocates CIDs from 255 downwards.

Class NA

Presence required

Visibility customer

Range yes, no


Initial value yes

qos

Parameter name qos

Domain

Description This attribute specifies the QoS (Quality of Service)for this path.

Class NA

Presence required

Visibility customer

Range [0..3]

Data type Decimal

Initial value 0

643


169 LineAutomaticProtectionSwitching (Laps)






Parents:

EM - Laps

Child(ren):

Sts - Vc4 -

Identifiers:


MaxIn-stances


Links:


workingLine • Lp Sonet

•protectionLine • Lp Sonet

•

Parameters:

rdnId


Domain

Description LineAutomaticProtectionSwitching/n This compon-ent manages the line protection of a SONET orSDH interface. Line Automatic Protection Switching(LAPS) can switch traffic from an active line onto astandby line when a failure or degradation occurs

644


on the active line. Note: The Lp/n Sonet/m Testcomponent or Lp/n Sdh/m Test component func-tionality is not supported when that line is provi-sioned as either working or protection line of theLaps component and it is located on the active FP.

Class NA

Presence required

Visibility customer

Unit

Range [0..15999]

Data Type Decimal

Initial Value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

holdOffTime

645


Parameter name holdOffTime

Domain

Description This attribute specifies the delay between the de-tection of a signal failure or signal degradation onthe active line and the initiation of a line switchover.When this attribute is set to infinite, it instructs theLaps component to never switch automatically. Theinfinite value must be used when the yProtectionprotocol is set.

Class NA

Presence required

Visibility customer

Range { [0.0..10.0],infinite }


Initial value 0.0

mimicAps

Parameter name mimicAps

Domain

Description This attribute specifies whether the Mimic APS pro-tocol should be enabled. Mimic APS is a Nortel Net-works proprietary protocol to allow for an AutomaticProtection Switching variant to be used betweenNortel Networks Multiservice Switch 15000 FPs andother hardware that supports the Mimic APS pro-tocol. It currently only supports the following four-port OC3 multi-mode and single-mode FPs:4pOC3SmIrAtm and 4pOC3MmAtm. When themimicAps attribute is set to enabled, the Mimic APSprotocol is used. The Mimic APS protocol supportsonly unidirectional non-revertive modes of APS andas such the mode and revertive attributes must beset to unidirectional and no respectively. When thisattribute is set to notApplicable, it instructs the Lapscomponent not to use this attribute for the specifiedprotocol. The notApplicable value must be usedwhen the yProtection protocol is set.

Class NA

Presence required

Visibility customer

Range disabled, enabled, notApplicable



646


mode

Parameter name mode

Domain

Description This attribute specifies the protection mode to use.If set to value of unidirectional, the Laps componentof the near end (NE) can decide independently ofthe far end (FE) which channel, either working orprotection, is active for receive. For this value, thetransmit and receive may be on different channels.Therefore, one end may receive from the protectionline while the other end receives from the activeline. If set to bidirectional value, it instructs the Lapscomponent of the NE to decide jointly with the FEwhich channel, either working or protection, is to beactive for receiving. For this value, the transmit andreceive are on the same channel. Therefore bothends receive from the same line. If set to notApplic-able value, it instructs the Laps component not touse this attribute when no k-byte information is ex-changed. The notApplicable value must be usedwhen the yProtection protocol is set. Note that ifeither end of the Laps component is set to unidirec-tional, the Laps component operates in unidirection-al mode. In other words, bidirectional mode takeseffect if and only if both ends of the Laps compon-ents are in bidirectional mode.

Class NA

Presence required

Visibility customer

Range notApplicable, unidirectional, bidirectional


Initial value unidirectional

primarySectionMismatchTime

Parameter name primarySectionMismatchTime

Domain

Description This attribute specifies the time to wait after aprimary section mismatch defect is detected/cleared, before raising/clearing an alarm. A primarysection mismatch occurs when the received andtransmitted channels in the K2 byte do not match.When this attribute is set to infinite, it instructs theLaps component not to raise an alarm when the K2byte do not match. The infinite value must be used

647


when the yProtection protocol is set. This attributeonly applies when the protocol attribute is set tog841AnnexB.

Class NA

Presence required

Visibility customer

Range { [50..1000],infinite }


Initial value 50

protectionLine

Parameter name protectionLine

Domain

Description This attribute is a link to the Sonet or Sdh compon-ent that provides the Laps' component protectionline (working line two in ITU-T G.841 Annex Bterms). This attribute must be set. The same rulesapply as described in the workingLine attribute.

Class NA

Presence required

Visibility customer

Range Lp Sonet, Lp Sdh

Data type HwLink

Initial value N.A.

protocol


Domain

Description This attribute specifies the protocol used to protectthe physical interfaces. The value standard indic-ates that 1+1 linear APS is used, as described inthe standards document GR-253 published by Tel-cordia and G.841 published by the ITU-T. The valueg841AnnexB indicates that optimized 1+1 bidirec-tional switching is used, as described in the stand-ard G.841 Annex B published by the ITU-T. Thisvalue is only supported on the 16pOC3SmIrAtm,16pOC3PosAtm and 4pMrPosAtm card type. Themode attribute must be set to bidirectional, the re-vertive attribute set to no, and the holdOffTime at-tribute set to 0 when the protocol attribute is set to

648


g841AnnexB. The value yProtection indicates thatLaps component is used only for equipment protec-tion and hitless software migration. This value isonly supported on the 16pOC3PosAtm card type.The mode attribute must be set to notApplicable,the revertive attribute set to notApplicable, the mim-icAps attribute set to notApplicable, the holdOffTimeattribute set to infinite, the waitToRestorePeriod at-tribute set to infinite, the signalDegradeRatio attrib-ute set to notApplicable, and the primarySection-MismatchTime attribute set to infinite when the pro-tocol attribute is set to yProtection.

Class NA

Presence required

Visibility customer

Range standard, g841AnnexB, yProtection


Initial value standard

revertive

Parameter name revertive

Domain

Description This attribute specifies whether revertive switchingis to be used. When this attribute value is set to no,the Laps component will not revert the receive act-ive line from protection back to working when aworking line request is cleared. When this attributevalue is set to yes, the Laps component will revertthe receive active line from protection back to work-ing when a working line request is cleared and afterthe provisioned value of waitToRestorePeriod attrib-ute has expired. When this attribute is set to notAp-plicable, it instructs the Laps component not to usethis attribute for the specified protocol. The notAp-plicable value must be used when the yProtectionprotocol is set because the concept of lineswitchover does not exist. Note that it is acceptablefor the near end and far end to be provisioned witha mix of revertive and nonrevertive switching; oneend can be revertive and the other nonrevertive.

Class NA

Presence required

Visibility customer

Range no, yes, notApplicable

649



Initial value no

sendLineAisDuringMigration

Parameter name sendLineAisDuringMigration

Domain

Description This attribute specifies whether Sonet/Sdh portslinked to a Laps component in an inter-card config-uration will send the Line Alarm Indication Signal(AIS-L) during the migration active stage of a Hit-less Software Migration or Hitless Software Patch-ing. The migration active stage for a card beginswhen the card is first loaded on the migration activeshelf and ends when the migration active shelf be-comes the active shelf. Sonet/Sdh ports are not inservice during the migration active stage of a soft-ware migration. Sending AIS-L during software mi-gration is used to inform the far end equipment thatthe Sonet/Sdh port is not available. If this attributeis set to no, the other end might try to use the Son-et/Sdh port that goes through a software migration.The recommended value for this attribute is yeswhen the far end equipment is another Nortel Net-works Multiservice Switch. If this attribute is set toyes, AIS-L is sent during software migration andthis may cause an extended traffic outage when theSonet/Sdh ports are connected to an equipmentthat delays clearing of Signal Degrade (SD) andSignal Fail (SF) conditions. Such delays are some-times implemented to reduce the number of rapidprotection switching oscillations. This attribute doesnot affect the behavior of Sonet/Sdh ports linked toa Laps component in an intra-card configuration orSonet/Sdh ports that are not linked to a Laps com-ponent.

Class NA

Presence required

Visibility customer

Range no, yes


Initial value no

signalDegradeRatio

Parameter name signalDegradeRatio

650


Domain

Description This attribute specifies the minimum bit error ratio(BER) for which a signal degradation failure is de-clared. Its value is the exponent of the BER, whichcorresponds to a BER range of 10e-5 through 10e-9. The switch initiation time for a signal degradationvaries depending on the observed BER (not theprovisioned signalDegradeRatio), as described inthe following table. BER - Switch Initiation Time(OC-3) 10e-5 - 1 second 10e-6 - 10 seconds 10e-7- 100 seconds 10e-8 - 16 minutes 40 seconds10e-9 - 2 hours 46 minutes 40 seconds The clear-ing threshold for a signal degradation is one-tenththe value of the signalDegradeRatio attribute. Forexample, if the provisioned signalDegradeRatio at-tribute is -5, the corresponding clearing threshold is10e-6. The clearing time varies depending on theclearing threshold (not the observed BER), and canbe determined from the above table. When this at-tribute is set to notApplicable, it instructs the Lapscomponent not to degrade Laps when BER is ob-served. The notApplicable value must be usedwhen the yProtection protocol is set.

Class NA

Presence required

Visibility customer

Range [-9..-5]

Data type MixedSigned

Initial value -5

waitToRestorePeriod

Parameter name waitToRestorePeriod

Domain

Description This attribute has a different meaning based on theprotocol type provisioned. A) The protocol attributeis set to standard: This attribute specifies the time(in minutes) during which the protection line re-mains the receive active line after the working linerecovers from the fault that caused the switch. Thisattribute is only applicable when the revertive attrib-ute value is set to yes. B) The protocol attribute isset to g841AnnexB: This attribute specifies the time(in minutes) after which a Signal Fail or Signal De-grade condition has cleared, but before which theline with the condition is considered in service.Once this time reaches zero, traffic continues to be

651


received from the current receive active line byswapping the primary and secondary section labels.No line switch takes place. C) The protocol attributeis set to yProtection: When this attribute is set to in-finite, it instructs the Laps component to wait an in-finite time.

Class NA

Presence required

Visibility customer



Initial value 5

workingLine

Parameter name workingLine

Domain

Description This attribute is a link to the Sonet or Sdh compon-ent that provides the Laps component's working line(working line one in ITU-T G.841 Annex B terms).This attribute must be set. The workingLine attributeand protectionLine attribute pairs must be valid.LAPS (Line Automatic Protection Switching) protec-tion can be configured between paired ports on thecard or between corresponding ports on adjacentcards. The following semantic checks exist for theworkingLine and protectionLine attributes: TheworkingLine and protectionLine attributes can linkports on two different LPs (Logical Processor): - theport number must match (that is, port zero on Lp/mmust link to port 0 on Lp/n, and so forth). - the Son-et or Sdh components specified by the link must nothave a Sts or Vc4 component. - each Lp must linkto exactly one card (that is, the spareCard attributeis not allowed to be set on either Lp). - each Lpmust link to the same type of card (that is, the shelfcard/n cardType attribute must be identical for bothcards). - the two cards must be in adjacent slots inthe shelf, with the lower- numbered slot being aneven number. - each Lp must link to the same Lo-gicalProcessorType component. - if the two lines ofthe protection pair are on different Lps, then theconnectionPoolCapacity attribute value of the LpEng Arc Ov components for the two adjacent Lpsmust be the same. The workingLine and protection-Line attributes can link to a pair of ports under thesame LP (Logical Processor) for the following

652


cards: - for 4pOC3SmIrAtm and 4pOC3MmAtmcards, the port number pair must be 0-1 or 2-3. - forthe 1pOC12SmLrAtm card, the port number pairmust be between the two ports 0-1.

Class NA

Presence required

Visibility customer

Range Lp Sonet, Lp Sdh

Data type HwLink

Initial value N.A.

653


170 LogicalProcessor (Lp)






Parents:

EM - Lp

Child(ren):

EDS1 - EE1 - Eng - Eth - Npu - OamEnet - Sdh - Sonet -

Identifiers:


MaxIn-stances


Links:


mainCard Shelf Card

spareCard Shelf Card

logicalProcessorType Sw Lpt

Parameters:

rdnId


Domain

Description LogicalProcessor/n The LogicalProcessor (Lp) com-ponent is a root component. One Lp component iscreated for each Logical Processor. An Lp may beconfigured to run on up to two cards; one as themain card, and the other as the spare card. Whentwo cards are configured, the Lp runs on one card,

654


and waits for that card to fail before starting to runon the other card.

Class NA

Presence required

Visibility customer

Unit

Range [0..15]

Data Type Decimal

Initial Value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

logicalProcessorType

Parameter name logicalProcessorType

Domain

655


Description This is the Logical Processor Type (LPT) that de-termines which software this LP will run.

Class NA

Presence required

Visibility customer

Range Sw Lpt


Initial value N.A.

mainCard

Parameter name mainCard

Domain

Description This is the preferred processor card on which thisLP should be assigned.

Class NA

Presence required

Visibility customer

Range Shelf Card


Initial value N.A.

oneForNSparingBehavior

Parameter name oneForNSparingBehavior

Domain

Description This attribute specifies the sparing behavior in a 1for N sparing configuration when a main card fails.If the attribute value is delayedSwitchOver, the fail-ure of a main card to recover as the active card willinitiate a switchover to the spare card. This sparingbehavior gives the failed main card a chance to re-cover and hence allows the main cards to remainprotected by the spare card. If the attribute value isimmediateSwitchOver, the failure of a main card ini-tiates an immediate switchover to the spare card.This sparing behavior provides greater emphasis onreducing outage time for a failed main card at theexpense of leaving the other main cards unprotec-ted.

Class NA

Presence required

656


Visibility customer

Range delayedSwitchOver, immediateSwitchOver


Initial value delayedSwitchOver

spareCard

Parameter name spareCard

Domain

Description This is the spare processor card on which this LPshould be assigned.

Class NA

Presence optional

Visibility customer

Range Shelf Card


Initial value N.A.

657


171 LpGroup (LpG)






Parents:

EM - LpG

Child(ren):

Lp -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description LpGroup/n The LpGroup (LpG) component is a rootcomponent representing an application-level equip-ment sparing in a multiple Lp protection modelbetween pairs or groups of FPs of the same or dif-ferent card types. An example of when to use thiscomponent is when you want to provide protectionamong a group of unprotected cards during soft-ware migration. In this situation, LpG is used as theparent component for a list of cards destined tomove either to the migration shelf or to stay in the

658


service shelf in the event of software migration.

Class NA

Presence required

Visibility customer

Unit

Range [1..7]

Data Type Decimal

Initial Value

659


172 LpeEngineering (Eng)





Parents:

EM - Lp - Eng

Child(ren):

AAList - Arc - Ds - Fcrc -

Identifiers:

-

Links:


Parameters:

660


173 ModuleData (Mod)





Parents:

EM - Mod

Child(ren):

-

Identifiers:

-

Links:


Parameters:

namsId

Parameter name namsId

Domain

Description This attribute specifies the Network Administration(Nams) Identifier associated with the node. It mustbe unique across the entire network of nodes sup-porting the transport of DPN traffic as well as allRMs and AMs in the network. The namsId attributemust be set when a DpnAddressPlan component isconfigured on a node. The value of the namsId at-tribute is used in accounting records, statistics re-cords, and time change accounting records; it iden-tifies nodes in these records. The Nams Id is as-signed by the network administrator. A value of49151 indicates that no Nams Id has been assignedto the module. Changing the value of the namsId at-tribute causes the node to be restarted.

661


Class NA

Presence required

Visibility customer

Range [256..49151]

Data type Decimal

Initial value 49151

nodeId


Domain

Description This attribute specifies a number that uniquely iden-tifies a node in the network. Changing the value ofthe nodeId attribute causes the node to be restar-ted.

Class NA

Presence required

Visibility customer

Range [1..4095]

Data type Decimal

Initial value N.A.

nodeName

Parameter name nodeName

Domain

Description This attribute specifies a string that is unique to thismodule in the network. This name is the componentinstance value of EM - the root of the componenthierarchy. It has, therefore, the same restriction andbehavior as any string instance value (for example,it is converted to upper case). Note that the EMcomponent is typically suppressed on output. Chan-ging the value of the nodeName attribute causesthe node to restarted.

Class NA

Presence required

Visibility customer

Range [1..12]


Initial value NONAME

662


nodePrefix

Parameter name nodePrefix

Domain

Description This attribute specifies an NSAP prefix which is dis-tributed to all other nodes whose clusterNode attrib-ute under the Rtg component is provisioned withthe same value as this node within a Topology re-gion. The attribute can be used to identify this node.This prefix is used by PORS, PNNI routing, andMCS. PORS calls that use NSAP addressing (forexample, CES) look for the node with the longestNSAP prefix that matches the called party address.The NSAP prefixes that PORS matches against arethe nodePrefix and the alternatePorsPrefixes. PNNIforms the default value of the nodeAddressPrefixattribute under the AtmPnni component with thisNSAP prefix followed by a unique MAC address.MCS uses the nodePrefix to form an NSAP addressthat is registered with the Networking API. ThisNSAP address is used to identify this node whenestablishing an MCS switched path. The valueentered must be 26 characters long. All charactersmust be hexadecimal with the following restrictions:- the first two characters are in the range of '10' to'FE', inclusive. - if the first two characters are '45',the 18th character must be an 'f' or an 'F'

Class NA

Presence optional

Visibility customer

Range [26..26]

Data type HexString

Initial value N.A.

regionId

Parameter name regionId

Domain

Description This attribute specifies the Topology Region towhich the node belongs. Nodes only exchange to-pological information with connected nodes in thesame region. Changing the value of the regionId at-tribute does NOT cause the node to be restarted.

Class NA

Presence required

663


Visibility customer

Range [0..126]

Data type Decimal

Initial value 0

664


174 NailedupAccessPoint (Nap)






Parents:

EM - Iub - Sig - SaalUni - Nap

EM - Aal2If - Alcap - SaalUni - Nap

Child(ren):

-

Identifiers:

-

Links:




• AtmIf Vcc Nep

•

Parameters:

atmConnection


Domain

Description This attribute specifies the ATM nailed up endpointthat this path will use. For example, AtmIf/n Vcc/vpi.vci Nep.

Class NA

Presence required

665


Visibility customer


Data type HwLink

Initial value N.A.

666


175 NetworkSynchronization (NS)






Parents:

EM - NS

Child(ren):

-

Identifiers:

-

Links:


Parameters:

primaryReference

Parameter name primaryReference

Domain

Description This attribute specifies the port that is the preferredchoice as the reference for the network clock.

Class NA

Presence optional

Visibility customer

Range [0..255]

Data type ComponentName

Initial value N.A.

667


reversionDelay

Parameter name reversionDelay

Domain

Description This attribute specifies how long the NetworkSyn-chronization component waits before using a portas a reference after it has been cleared of its de-graded/disabled status. A value of 1 to 120 spe-cifies the number of minutes it takes to switch backto an active reference after the fault has been re-moved. A value of <manual> specifies that the op-erator command "revert ns" is required to switchback. Note: In non-revertive (manual) mode, if allprovisioned references have failed, the NS stays inholdover mode (NS clockSyncState = freeRun).When one of the provisioned references becomesavailable, the NS remains in holdover mode and willnot automatically switch to the available reference(exiting holdover requires that an operator issue thecommand "revert ns"). In revertive mode, the NSautomatically exits holdover mode and switches tothe available reference, either immediately or with adelay if provisioned. When this attribute value is setto non-zero, the loss of the 8kHz signal detected onthe enabled active reference triggers the Network-Synchronization component to switch to the nextbest reference if the fault lasts longer than 1 minute.The 1 minute integration time is required for stabil-ity. On the reversionDelay timeout, it will switchback to this active reference. If reversionDelay ismanual, the operator command "revert ns" is re-quired. To avoid many switching back and forth tothe active reference which has a permanent loss of8kHz, it is recommended to set the reversionDelayattribute to a minimum of 10 minutes. "Loss of 8kHz" is referring only to the derived 8 kHz referenceclocks signal within the MSS switch. I.e., it is not re-lated to LOS/LOF/AIS-L failures on the line timingor external timing reference.

Class NA

Presence required

Visibility customer

Range { [0..120],manual }


Initial value 0

secondaryReference

668


Parameter name secondaryReference

Domain

Description This attribute specifies the port that is the secondchoice for the reference for the network clock.

Class NA

Presence optional

Visibility customer

Range [0..255]


Initial value N.A.

setsPrimaryReference

Parameter name setsPrimaryReference

Domain

Description This attribute specifies the source that is the pre-ferred choice as the reference for the SETS port.

Class NA

Presence required

Visibility customer

Range nsSelect, bitsA, bitsB, nsProcessed, none


Initial value none

setsSSMProtocol

Parameter name setsSSMProtocol

Domain

Description This attribute specifies if the SETS clock referenceselection based on Synchronization Status Mes-sage (SSM) is enabled. If this attribute has a valueof enabledRevertive, then the setsActiveReferenceand setsStandbyReference are revertive to the pro-visioned priority of SETS primary, secondary or ter-tiary provided the reference has the same qualitylevel. If the attribute value is enabledNonRevertive,then the setsActiveReference clock reference se-lection is not dependent on the provisioned priorityof SETS primary, secondary or tertiary (thesetsStandbyReference clock will always be revert-ive). If the attribute value is disabled, then the SSMmessages are only stored but no broadcasting or

669


switching decision is made.

Class NA

Presence required

Visibility customer

Range disabled, enabledRevertive, enabledNonRevertive



setsSecondaryReference

Parameter name setsSecondaryReference

Domain

Description This attribute specifies the source that is the secondchoice for the reference for the SETS port.

Class NA

Presence required

Visibility customer



Initial value none

setsSquelchTimer

Parameter name setsSquelchTimer

Domain

Description This attribute specifies how long the NetworkSyn-chronization component waits before starting theSETS clock source selection. This is to allow thestability of the reference sources. This timer is ap-plicable after a node reset or CP switchover.

Class NA

Presence required

Visibility customer

Range [0..12]

Data type Decimal

Initial value 0

setsTertiaryReference

670


Parameter name setsTertiaryReference

Domain

Description This attribute specifies the source that is the thirdchoice for the reference for the SETS port.

Class NA

Presence required

Visibility customer



Initial value none

ssmProtocol

Parameter name ssmProtocol

Domain

Description This attribute specifies if the clock reference selec-tion based on Synchronization Status Message(SSM) is enabled on the node. If this attribute has avalue of enabledRevertive, then the activeRefer-ence and standbyReference are revertive to theprovisioned priority of primary, secondary or tertiaryprovided the reference has the same quality level. Ifthe attribute value is enabledNonRevertive, then theactiveReference clock reference selection is not de-pendent on the provisioned priority of primary, sec-ondary or tertiary (the standbyReference clock willalways be revertive). If the attribute value is en-abledMigration, then the SSM messages are storedand broadcasted as in other enabled states but noswitching decisions are made based on the SSMmessages (this is a useful state during network mi-gration when not all node in the network are distrib-uting the proper SSM values). If the attribute valueis disabled, then the SSM messages are onlystored but no broadcasting or switching decision ismade.

Class NA

Presence required

Visibility customer

Range disabled, enabledRevertive, enabledNonRevertive,enabledMigration



671


termPanel

Parameter name termPanel

Domain

Description This attribute specifies whether a termination panelis used in the external timing configuration. A valueof yes indicates the termination panel is used. Avalue of no indicates the termination panel is notused.

Class NA

Presence required

Visibility customer

Range no, yes


Initial value N.A.

tertiaryReference

Parameter name tertiaryReference

Domain

Description This attribute specifies the port that is the thirdchoice for the reference for the network clock.

Class NA

Presence optional

Visibility customer

Range [0..255]


Initial value N.A.

useableReferences

Parameter name useableReferences

Domain

Description This attribute specifies the criteria that a referencemust meet for the NetworkSynchronization compon-ent to consider it a usable clocking source. A valueof enabled indicates that all enabled clockingsources are usable. A value of notDegraded indic-ates that clocking sources must be enabled and notdegraded to be usable.

Class NA

672


Presence required

Visibility customer

Range enabled, notDegraded



673


176 NtsServer (Server)






Parents:

EM - Time - Server

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Time Server/n The Server component represents asingle network time server that this module can usefor network time synchronization.

Class NA

Presence required

Visibility customer

Unit

Range [1..10]

674


Data Type Decimal

Initial Value

ipAddress


Domain

Description This attribute specifies the IP address of a networktime server that the module will attempt to syn-chronize with. The value of ipAddress must beunique across all Server components.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

ipStack

Parameter name ipStack

Domain

Description This attribute specifies the IP stack that XNTP usesto communicate with the network time server. If ipi-FrIpiVc is selected, then an IpiFr or IpiVc compon-ent must be provisioned on this module. If vrIp isselected, then IP must be provisioned under themanagement VR on this module.

Class NA

Presence required

Visibility customer

Range ipiFrIpiVc, vrIp


Initial value vrIp

stratumLimit

Parameter name stratumLimit

Domain

Description This attribute specifies the limit for the stratum re-

675


ported by the remote time server. Stratum is an in-teger used by the Network Time Protocol to indicatethe topological distance between a client and a timeserver. A smaller stratum value indicates a bettertopological distance to a time server. When thestratum reported by the remote time server exceedsthis value, alarm 70150015 is raised. A clear alarmis issued when the reported stratum is no longergreater than this value.

Class NA

Presence required

Visibility customer

Range [1..15]

Data type Decimal

Initial value 15

676


177 NtsTime (Time)





Parents:

EM - Time

Child(ren):

Server -

Identifiers:

-

Links:


Parameters:

timeDifferenceLimit

Parameter name timeDifferenceLimit

Domain

Description This attribute specifies the allowed differencebetween the times reported by provisioned timeservers. The timeDifferenceLimit value is provi-sioned based on the sensitivity of time dependentapplications and the network topology in use. Anapplication more sensitive to time requires consist-ently close times reported by the time servers. Amore elaborate network topology may cause thetime servers to report a wider range of time differ-ences due to network delays than a simple network.An alarm is issued when the times reported by twotime servers differ by more than the specifiedamount. The value nolimit disables the check.

Class NA

677


Presence required

Visibility customer

Range { [0.001..1000.000],nolimit }


Initial value nolimit

678


178 PcsLpgLogicalProcessor (Lp)






Parents:

EM - LpG - Lp

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description PcsLpgLogicalProcessor/n The PcsLpgLogicalPro-cessor (Lp) component is a subcomponent of theLpGroup component. It provides multiple equipmentprotection capabilities between pairs or groups ofLp associated to the same or different card types.An example of when you would use this componentis when you want to provide protection among agroup of unprotected cards of the same or differentcard type. In this situation, LpG is used as the par-ent component for a list of Lp in an application-level

679


sparing relationship.

Class NA

Presence required

Visibility customer

Unit

Range [1..15]

Data Type Decimal

Initial Value

migrationBehaviour

Parameter name migrationBehaviour

Domain

Description This attribute specifies the migration behavior of anactive card associated to the Lp configured underan LpG. If the attribute value is stayInServiceShelf,the card associated to the Lp will stay in the serviceshelf during an Hitless Software Migration. If thevalue of the attribute is moveToMigrationShelf, thecard associated to the Lp will move to the MigrationShelf during an Hitless Software Migration.

Class NA

Presence required

Visibility customer

Range stayInServiceShelf, moveToMigrationShelf


Initial value stayInServiceShelf

680


179 PmsLanFramer (Framer)





Parents:

EM - La - Framer

Child(ren):

-

Identifiers:

-

Links:


Parameters:

interfaceName

Parameter name interfaceName

Domain

Description This attribute associates the LanApplication with aspecific Lan interface such as Ethernet, Fddi, orTokenRing. This also defines the LogicalProcessoron which Framer's parent component (as well asFramer itself) will run. Only one (1) LAN interfacecan be linked to a Framer except for Ether-net100BaseT LAN interface, for which up to two (2)interfaces residing on the same LogicalProcessorcan be linked.

Class NA

Presence required

Visibility customer

Range Lp OamEnet, Lp Eth

681



Initial value N.A.

682


180 PmsLanOamEthernet (OamEnet)






Parents:

EM - Lp - OamEnet

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


applicationFramerName • La Framer

•

Parameters:

rdnId


Domain

Description Lp/0 OamEthernet This component represents anEthernet port on the control processor. Only one in-stance of this component may be created corres-ponding to the one hardware port on the controlprocessor. This port is designed specifically and ex-clusively for Operations, Administration, and Main-tenance purposes; any other use of this port is un-supported and not advised.

683


Class NA

Presence required

Visibility customer

Unit

Range [0..0]

Data Type Decimal

Initial Value



Domain

Description This attribute specifies which Lan Application is run-ning on this port.

Class NA

Presence optional

Visibility customer

Range La Framer, AtmIf


Initial value N.A.

commentText


Domain


Class NA

Presence required

Visibility customer

Range [0..60]


Initial value

customerIdentifier


Domain


684



Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

duplexMode

Parameter name duplexMode

Domain

Description This attribute specifies the duplex mode for theOAM Ethernet port. If the attribute is set to auto-Config then the duplex mode determined by theauto-negotiation process. The actual duplex modeis reported by the actualDuplexMode attribute.

Class NA

Presence required

Visibility customer

Range half, full, autoConfig



extendedStatistics

Parameter name extendedStatistics

Domain

685


Description This attribute specifies if extended statistics are tobe collected for the OamEthernet component. Theextended statistics include: singleCollisionFrames,multipleCollisionFrames, lateCollisions, excessive-Collisions, carrierSenseErrors, and clearToSend-SignalLoss. These statistics all require extra pro-cessing to gather and store which may have a neg-ative impact on the overall performance of the OAMEthernet port. If extendedStatistics is set to dis-abled, then these particular statistical attributes willbe suppressed from display operations.

Class NA

Presence required

Visibility customer




ifAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up



Domain

Description This attribute specifies that user defined text con-tained in vendor and commentText attributes of thisVendorInfo instance will be appended to the com-ment text of any alarms, excluding hardware initial-ization alarms, for the associated interface port if

686


this attribute is set to on.

Class NA

Presence required

Visibility customer

Range no, yes


Initial value no

lineSpeed

Parameter name lineSpeed

Domain

Description This attribute specifies the operating speed for theOAM Ethernet port. The operating speed is eithertenMeg, hundredMeg, or autoConfig. If the attributeis set to autoConfig then the operating speed is de-termined by the auto-negotiation process. The actu-al line speed is reported by the actualLineSpeed at-tribute.

Class NA

Presence required

Visibility customer

Range tenMeg, hundredMeg, autoConfig



switchoverHoldoff

Parameter name switchoverHoldoff

Domain

Description This attribute specifies the time interval betweendetection of a port or link failure and initiation of CPswitchover. This attribute is ignored if switchover-OnFailure is disabled. The switchover will occuronly if the standby CP OAM Ethernet port is opera-tional.

Class NA

Presence required

Visibility customer

Range [10..60]

Data type Decimal

687


Initial value 30

switchoverOnFailure

Parameter name switchoverOnFailure

Domain

Description This attribute specifies if a CP switchover shouldoccur if a port or link failure is detected by the initialtest process or if a steady state link failure is ob-served. The switchover will occur only if the standbyCP OAM Ethernet port is operational. This attributecan be set to one of the following values: enabled:This value indicates that a switchover will takeplace if a port or link failure is detected. disabled:This value indicates that a switchover will not takeplace if a port or link failure is detected.

Class NA

Presence required

Visibility customer




vendor


Domain


Class NA

Presence required

Visibility customer

Range [0..20]


Initial value

688


181 ProtocolPort (Pp)






Parents:

EM - Vr - Pp

Child(ren):

IpPort -

Identifiers:


MaxIn-stances


Links:


linkToMedia • Vm If

• La Vlan

• La

• AtmMpe

•

Parameters:

rdnId


Domain

Description Vr/<string> Pp/<string> This component representsa logical interface to the network. Protocol Ports areassociated with physical or logical media via a link-

689


age attribute. Protocol Ports allow for individual up-per layer protocols to be enabled or disabled.

Class NA

Presence required

Visibility customer

Unit

Range [1..20]


Initial Value

linkToMedia

Parameter name linkToMedia

Domain

Description This attribute defines the Media Application whichthis Protocol Port is using as an interface to the net-work.

Class NA

Presence optional

Visibility customer

Range Vm If, La Vlan, La, AtmMpe, LocalMedia If


Initial value N.A.

snmpAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up

690


691


182 PsSaalNniTrafficManagement (Tm)





Parents:

EM - Ss7 - SaalNni - SrcPvc - Tm

Child(ren):

-

Identifiers:

-

Links:


Parameters:

atmServiceCategory


Domain

Description This attribute specifies the desired ATM service cat-egory for this connection. Currently SaalNni onlysupports the rtVbr ATM service category.

Class NA

Presence required

Visibility customer




692


rxTrafficDescParm


Domain

Description This attribute is a vector of five traffic parameterswhose meanings are defined by the rxTrafficDesc-Type attribute. If the value of the rxTrafficDescTypeattribute is sameAsTx, the values provisioned in thisattribute are ignored. The traffic parameters for thereceive direction are taken from the txTraffic-DescParm attribute. The values of peak cell rate(PCR), sustained cell rate (SCR), and Minimum CellRate (MCR) are expressed in cell/s. Maximum burstsize (MBS) is expressed in cells. The value of CD-VT is expressed in microseconds. The values ofPCR, SCR, MCR, MBS and CDVT are used for us-age parameter control (UPC). When rxTrafficDesc-Type is 1 or 2, all of the parameters must be set tozero (unused). When rxTrafficDescType is 3, para-meter 1 represents the PCR for CLP equal to 0 and1 traffic; and parameter 4 represents the CDVT.Parameter 1 must be non-zero. Parameters 2 and 3must be set to zero (unused). When rxTrafficDesc-Type is 4, parameter 1 represents the PCR for CLPequal to 0 and 1 traffic; parameter 2 represents thePCR for CLP equal to 0 traffic with cell discard; andparameter 4 represents the CDVT. Parameters 1and 2 must be non-zero. Parameter 3 must be setto zero (unused). Parameter 1 must be greater thanor equal to parameter 2. When rxTrafficDescType is5, parameter 1 represents the PCR for CLP equalto 0 and 1 traffic; parameter 2 represents the PCRfor CLP equal to 0 traffic with cell tagging; and para-meter 4 represents the CDVT. Parameters 1 and 2must be non-zero. Parameter 3 must be set to zero(unused). Parameter 1 must be greater than orequal to parameter 2. When rxTrafficDescType is a6, parameter 1 represents the PCR for CLP equalto 0 and 1 traffic; parameter 2 represents the SCRfor CLP equal to 0 and 1 traffic; parameter 3 repres-ents the MBS for CLP equal to 0 and 1 traffic; andparameter 4 represents the CDVT. Parameters 1, 2and 3 must be non-zero. Parameter 1 must begreater than or equal to Parameter 2. When rxTraf-ficDescType is 7, parameter 1 represents the PCRfor CLP equal to 0 and 1 traffic; parameter 2 repres-ents the SCR for CLP equal to 0 traffic with cell dis-card; parameter 3 represents the MBS for CLPequal to 0 traffic; and parameter 4 represents theCDVT. Parameters 1, 2 and 3 must be non-zero.Parameter 1 must be greater than or equal to para-

693


meter 2. When rxTrafficDescType is 8, parameter 1represents the PCR for CLP equal to 0 and 1 traffic;parameter 2 represents the SCR for CLP equal to 0traffic with cell tagging; parameter 3 represents theMBS for CLP equal to 0 traffic; and parameter 4represents the CDVT. Parameter 1, 2 and 3 mustbe non-zero. Parameter 1 must be greater than orequal to parameter 2. When rxTrafficDescType is 9,parameter 1 represents the PCR; parameter 2 rep-resents the CDVT; parameter 3 represents theMCR. Parameter 4 is not used and must be zero.Parameter 1 must be non- zero and must be great-er than or equal to parameter 3. Parameter 3 mayoptionally be zero. If the value of CDVT either inparameter 2 or in parameter 4 is zero, the CDVT istaken from the CA defaults for the particular atm-ServiceCategory of this connection. Parameter 5 ofthe rxTrafficDescParm is always unused. When rx-TrafficDescriptorType is 3 through 8, there are cer-tain extreme combinations of rxTrafficDescParmwhich are outside the capabilities of the UPC hard-ware. The check prov command detects such casesand generates an error message. If this happens,adjust the parameters until they fall within the sup-ported limits. To calculate the limits, use the follow-ing formulae: I1 = 1,000,000,000 / PCR L1 = CDVT* 1000 I2 = 1,000,000,000 / SCR L2 = CDVT +(MBS - 1) * (I2 - I1) Note that I2 and L2 only applywhen the rxTrafficDescriptorType is 6 through 8.For 16pOC3SmIrAtm card, L2 must be less than orequal to 2,674,011,406. For 16pOC3PosAtm card,L2 must be less than or equal to 17,179,869,180.

Class NA

Presence required

Visibility customer

Range [0..2147483647]



rxTrafficDescType


Domain

Description This attribute specifies the type of traffic manage-ment which is applied to the receive direction of thisconnection as defined in the ATM Forum. The rx-TrafficDescType determines the number and mean-

694


ing of the parameters in the rxTrafficDescParm at-tribute. The value sameAsTx means the rxTraffic-DescType as well as the rxTrafficDescParm attrib-ute values are taken from the values of the txTraf-ficDescType and txTrafficDescParm attributes. Cur-rently, for SaalNni, the type must be set to a valueof '6'.

Class NA

Presence required

Visibility customer

Range 1, 2, 3, 4, 5, 6, 7, 8, 9, sameAsTx



txTrafficDescParm


Domain

Description This attribute is a vector of five traffic parameterswhose meanings are defined by the txTrafficDesc-Type attribute. The values of peak cell rate (PCR),sustained cell rate (SCR), Minimum Cell Rate(MCR) and requested shaping rate are expressedin cell/s. Maximum burst size (MBS) is expressed incells. CDVT is expressed in microseconds. The val-ues of PCR, SCR, MCR, MBS and CDVT are usedfor connection admission control (CAC). The valueof CDVT is only used for connections where theatmServiceCategory is constantBitRate. For all oth-er values of atmServiceCategory, CDVT is ignored.The values of PCR, SCR, MCR and requestedshaping rate are used to determine the actual shap-ing rate where traffic shaping is enabled. When tx-TrafficDescType is 1 or 2, all of the parametersmust be set to zero. When txTrafficDescType is 3,parameter 1 represents the PCR for CLP equal to 0and 1 traffic; parameter 4 represents the CDVT;and parameter 5 represents the requested shapingrate. A non-zero value in parameter 5 overrides anyvalue in parameter 1. This result is used as thePCR. Parameter 1 must be non-zero. Parameters 2and 3 must be zero. When txTrafficDescType is 4,parameter 1 represents the PCR for CLP equal to 0and 1 traffic with cell discard; parameter 2 repres-ents the PCR for CLP equal to 0 traffic; parameter 4represents the CDVT; and parameter 5 representsthe requested shaping rate. A non-zero value in

695


parameter 5 overrides any value in parameter 1.This result is used as the PCR. Parameter 1 mustbe greater than or equal to parameter 2. Paramet-ers 1 and 2 must be non-zero. Parameter 3 must bezero. When txTrafficDescType is 5, parameter 1represents the PCR for CLP equal to 0 and 1 trafficwith cell tagging; parameter 2 represents the PCRfor CLP equal to 0 traffic; parameter 4 representsthe CDVT; and parameter 5 represents the reques-ted shaping rate. A non-zero value in parameter 5overrides any value in parameter 1. This result isused as the PCR. Parameter 1 must be greaterthan or equal to parameter 2. Parameters 1 and 2must be non-zero. Parameter 3 must be zero.When txTrafficDescType is 6, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0 and1 traffic; parameter 3 represents the MBS for CLPequal to 0 and 1 traffic; parameter 4 represents theCDVT; and parameter 5 represents the requestedshaping rate. A non-zero value in parameter 5 over-rides any value in parameter 1. This result is usedas the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal toparameter 2. Parameter 5, must either be zero(unused) or greater than or equal to parameter 2.When txTrafficDescType is 7, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0 withcell discard; parameter 3 represents the MBS forCLP equal to 0 traffic; parameter 4 represents theCDVT; and parameter 5 represents the requestedshaping rate. A non-zero value in parameter 5 over-rides any value in parameter 1. This result is usedas the PCR. Parameters 1, 2 and 3 must be non-zero. Parameter 1 must be greater than or equal toparameter 2. Parameter 5, must either be zero(unused) or greater than or equal to parameter 2.When txTrafficDescType is 8, parameter 1 repres-ents the PCR for CLP equal to 0 and 1 traffic; para-meter 2 represents the SCR for CLP equal to 0traffic with cell tagging; parameter 3 represents theMBS for CLP equal to 0 traffic; parameter 4 repres-ents the CDVT; and parameter 5 represents the re-quested shaping rate. A non-zero value in paramet-er 5 overrides any value in parameter 1. This resultis used as the PCR. Parameters 1, 2 and 3 must benon-zero. Parameter 1 must be greater than orequal to parameter 2. Parameter 5, must either bezero (unused) or greater than or equal to parameter2. When txTrafficDescType is 9, parameter 1 rep-

696


resents the PCR; parameter 2 represents the CD-VT; parameter 3 represents the MCR; parameter 4and parameter 5 represent are not used and mustbe zero. Parameter 1 must be non-zero and mustbe greater than or equal to parameter 3. Parameter3 may be optionally zero. Whenever it is valid forPCR to be specified, parameter 5 may also be usedto specify a requested shaping rate. A non-zerovalue in parameter 5 overrides the value in para-meter 1 and is used as the peak cell rate in calcula-tions of CAC and shaping rate. When the atmSer-viceCategory is availableBitRate (ABR), the shap-ing rate is dynamically chosen, based on the ABRflow control mechanism, as a value between theMCR and the PCR or the requested shaping rate ifapplicable. For txTrafficDescType 3, 4 and 5, thetransmit traffic is shaped at the next available shap-ing rate less than the PCR. For txTrafficDescType6, 7 and 8 if linear traffic shaping is selected, thetransmit traffic is shaped at the highest availablerate which is between PCR and SCR. However, ifthere is no available shaping rate between PCRand SCR, traffic is shaped at the next rate abovethe PCR. For txTrafficDescType 6, 7 and 8 if in-verse-UPC traffic shaping is selected, the transmittraffic is shaped at a variable rate which conformsto the PCR, SCR and MBS of the connection trafficdescriptor.

Class NA

Presence required

Visibility customer

Range [0..2147483647]



txTrafficDescType


Domain

Description This attribute specifies the type of traffic manage-ment which is applied to the transmit direction ofthis connection as defined in the ATM Forum. ThetxTrafficDescType determines the number andmeaning of the parameters in the txTraffic-DescParm attribute. Currently, for SaalNni, the typemust be set to a value of '6'.

Class NA

697


Presence required

Visibility customer

Range 1, 2, 3, 4, 5, 6, 7, 8, 9


Initial value 6

698


183 PsSs7DstPvc (DstPvc)






Parents:

EM - Ss7 - SaalNni - DstPvc

Child(ren):

-

Identifiers:

-

Links:


Parameters:

699


184 PsSs7Link (Lk)






Parents:

EM - Ss7 - Mtp3 - Ls - Lk

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


linkToSaalNni Ss7 SaalNni

Parameters:

rdnId


Domain

Description Ss7 Mtp3/n Linkset/n Link/n This component rep-resents a SS7 signalling link that conveys signallinginformation between two signalling points.

Class NA

Presence required

Visibility customer

Unit

700


Range [0..15]

Data Type Decimal

Initial Value

linkToSaalNni

Parameter name linkToSaalNni

Domain

Description This attribute specifies a link to an Ss7 SaalNnicomponent for each Ss7Link component in a Link-Set (for example, SaalNni/n).

Class NA

Presence required

Visibility customer

Range Ss7 SaalNni


Initial value N.A.

701


185 PsSs7Linkset (Ls)






Parents:

EM - Ss7 - Mtp3 - Ls

Child(ren):

Lk - Ri -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 Mtp3/n Linkset/n This component representsan MTP3 linkset. A linkset is a grouping of sig-nalling links that are used to transfer signallingbetween this node and a specific adjacent signallingpoint.

Class NA

Presence required

Visibility customer

702


Unit

Range [0..255]

Data Type Decimal

Initial Value

adjPointCode

Parameter name adjPointCode

Domain

Description This attribute specifies the point code of the nodethat this node directly connects to through this link-set. The point code must be provisioned in one ofthe following formats, where the ITU vs ANSI typeis specified by the MessageTransferPartLayer3Linkset protocolVariant attribute: basic: The pointcode is provisioned as a decimal number in therange 1..16383 for ITU point code types or1..16777215 for ANSI point code types. A value of 0is not valid. segmented: The point code is provi-sioned as three integers, separated by dots. ForITU point codes, the first integer must be in therange 0..7, the second integer must be in the range0..255, and the third integer must be in the range0..7. For ANSI point codes, the first integer must bein the range 1..255, the second integer must be inthe range 0..255, and the third integer must be inthe range 0..255. A value of 0.0.0 is not valid. Thisattribute must not specify a point code identical tothat specified by origPointCode and destPointCode.Changing the value of this attribute causes all thelinksets associated with the MTP3 layer to be re-started.

Class NA

Presence required

Visibility customer

Range { [1..16383], }


Initial value N.A.

linkOscillationProbationTimer

Parameter name linkOscillationProbationTimer

Domain

Description This attribute specifies the value of T33, defined in

703


ANSI standard T1.111.4-2001, used as part of linkoscillation filtering procedure B. This timer is startedwhen a signaling link becomes active. While thetimer is running, the link is in a probation period.This timer is stopped if the signaling link fails. MTP3then starts the link suspension period, as controlledby timer T34. Upon timer expiry, MTP3 takes no ac-tion. A value of disabled indicates that the timer willnot be started, and thus, the link oscillation filteringprocedure will not be used.

Class NA

Presence required

Visibility customer




linkOscillationSuspensionTimer

Parameter name linkOscillationSuspensionTimer

Domain

Description This attribute specifies the value of T34, defined inANSI standard T1.111.4-2001, used as part of linkoscillation filtering procedure B. This timer is startedif a signaling link fails during the probation period,as controlled by timer T33. The link remains inact-ive during this suspension period. This timer isstopped only on timeout. Upon timer expiry, MTP3begins link restoration.

Class NA

Presence required

Visibility customer




localInhibitTestTimer

Parameter name localInhibitTestTimer

Domain

Description This attribute specifies the value of the local inhibittest timer. This timer is defined as timer T22 in ITU-T recommendation Q.704 and as timer T20 in ANSI

704


standard T1.111.4-2001. If the protocolVariant at-tribute is set to ITU, then the value can be set toany decimal number in the range 180..360. If theprotocolVariant attribute is set to ANSI, then thevalue can be set to any decimal number in therange 90..120. This timer is started when a link be-comes locally inhibited. Upon timer expiry, if the linkis still unavailable and locally inhibited, the timer isrestarted, and a local inhibit test message is sent tothe remote end.

Class NA

Presence required

Visibility customer

Range [90..360]

Data type Decimal

Initial value 180

networkIndicator


Domain

Description This attribute specifies whether the network is a na-tional network, or an international network. This at-tribute determines the value that is filled in the Net-work Indicator field of the messages sent to the re-mote end. This attribute must match what the peerMTP3 layer on the remote end expects in the mes-sages. Changing the value of this attribute causesall the linksets associated with this MTP3 layer tobe restarted. Each meaning of each valid value fornetworkIndicator is described in ITU-T recommend-ation Q.704 and in ANSI standard T1.111.4-2001.international - MTP3 node is a member of an "Inter-national" network. internationalSpare - MTP3 nodeis a member of an "International Spare" network.national - MTP3 node is a member of a "National"network. nationalSpare - MTP3 node is a memberof a "National Spare" network.

Class NA

Presence required

Visibility customer



705



protocolVariant

Parameter name protocolVariant

Domain

Description This attribute specifies the SS7 protocol variant. Inaddition to controlling internal protocol behaviour,this attribute determines whether the Point Codesassociated with this Linkset have a maximum rangeof 16383 (7.255.7) for ITU or 16777215(255.255.255) for ANSI.

Class NA

Presence required

Visibility customer

Range itu, ansi


Initial value itu

remoteInhibitTestTimer

Parameter name remoteInhibitTestTimer

Domain

Description This attribute specifies the value of the tremote in-hibit test timer. This timer is defined as timer T23 inITU-T recommendation Q.704 and as timer T21 inANSI standard T1.111.4-2001. If the protocolVari-ant attribute is set to ITU, then the value can be setto any decimal number in the range 180..360. If theprotocolVariant attribute is set to ANSI, then thevalue can be set to any decimal number in therange 90..120. This timer is started when a link be-comes remote inhibited. Upon timer expiry, if thelink is still unavailable and remotely inhibited, thetimer is restarted, and a remote inhibit test messageis sent to the remote end

Class NA

Presence required

Visibility customer

Range [90..360]

Data type Decimal

Initial value 180

706


707


186 PsSs7LocalSubsystem (Loc)






Parents:

EM - Ss7 - Sccp - Loc

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 Sccp/n LocalSubsystem This component rep-resents a local subsystem that is providing servicesusing this Ss7SignallingConnControlPart compon-ent.

Class NA

Presence required

Visibility customer

Unit

708


Range [0..255]

Data Type Decimal

Initial Value

subsystemNumber

Parameter name subsystemNumber

Domain

Description This attribute specifies the subsystem number ofthe local subsystem represented by theSs7LocalSubsystem component.

Class NA

Presence required

Visibility customer

Range ranap, rnsap


Initial value ranap

709


187 PsSs7MessageTransferPartLayer3 (Mtp3)






Parents:

EM - Ss7 - Mtp3

Child(ren):

Ls - Rs - ServInd -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 MessageTransferPartLayer3/n This componentrepresents an MTP 3 layer of the SS7 stack.

Class NA

Presence required

Visibility customer

Unit

Range [1..16]

710


Data Type Decimal

Initial Value

ansiOrigPointCode

Parameter name ansiOrigPointCode

Domain

Description This attribute specifies the ANSI point code of thenode that the MTP3 layer manages. The point codemust be provisioned in one of the following formats:basic: The point code is provisioned as a decimalnumber in the range 65536..16777215. segmented:The point code is provisioned as three integers,separated by dots. The first integer must be in therange 1..255, the second integer must be in therange 0..255, and the third integer must be in therange 0..255. This attribute must not specify a pointcode identical to that specified by adjPointCode anddestPointCode. Changing the value of this attributecauses all the linksets associated with this MTP3layer to be restarted.

Class NA

Presence optional

Visibility customer

Range { [0..4294967295], }


Initial value N.A.

changebackDiversionDelayTimer

Parameter name changebackDiversionDelayTimer

Domain

Description This attribute specifies the timer value for the timerT3 defined in ITU-T recommendation Q.704 and inANSI standard T1.111.4- 2001. It provides timecontrolled diversion-delay to avoid mis- sequencingon changeback. This timer is started when a link isin changeback and the signalling point at the re-mote end of newly available link is not accessiblevia an alternative link. Upon timer expiry, traffic isrestarted on the link.

Class NA

Presence required

711


Visibility customer

Range [500..1200]

Data type Decimal

Initial value 500

changeoverAckTimer

Parameter name changeoverAckTimer

Domain

Description This attribute specifies the value of the timer T2defined in ITU-T recommendation Q.704 and in AN-SI standard T1.111.4-2001. This timer is startedwhen MTP layer 3 receives a Backward SequenceNumber of the next signalling unit to be Transmitted(BSNT) from a link in the changeover process. Thistimer is stopped when the link becomes available,or when a changeover message is received whilewaiting for an ack. Upon timer expiration, the link isreleased. The number of expiries of this timer is in-dicated by the attribute changeoverAckTimeouts.

Class NA

Presence required

Visibility customer

Range [700..2000]

Data type Decimal

Initial value 700

changeoverHoldoffTimer

Parameter name changeoverHoldoffTimer

Domain

Description This attribute specifies the value of the timer T1defined in ITU-T recommendation Q.704 and ANSIstandard T1.111.4-2001. This timer value determ-ines how long to wait for a failed link to becomeavailable when changeover is required, but there isno alternate link. It is used to avoid message mis-sequencing on changeover. This timer is startedwhen a link goes down and a changeover is re-quired, but changeover messages cannot be ex-changed on an alternate link. This timer is stoppedwhen the failed link becomes available. Upon timerexpiration, it sends all the retrieved (layer 2) andbuffered (layer 3) messages down the new link and

712


marks changeover as complete.

Class NA

Presence required

Visibility customer

Range [500..1200]

Data type Decimal

Initial value 500

firstAttemptChangebackAckTImer

Parameter name firstAttemptChangebackAckTImer

Domain

Description This attribute specifies the timer value for the timerT4 defined in ITU-T recommendation Q.704 and inANSI standard T1.111.4- 2001. This timer is startedwhen a link is in changeback and the SignallingPoint (SP) at the remote end of the newly availablelink is accessible via an alternative link. This timer isstopped when a link has attempted changeback forthe first time and receives a changeback ack forevery changeback declaration sent. Upon timer ex-piration, secondAttemptChangebackAckTimer isstarted and all the unacknowledged changebackdeclarations are resent. The number of resends ofthe changeback declarations is indicated by the at-tribute changebackDeclarationTimeouts.

Class NA

Presence required

Visibility customer

Range [500..1200]

Data type Decimal

Initial value 500

forceUninhibitTimer

Parameter name forceUninhibitTimer

Domain

Description This attribute specifies the timer value for the timerT13 defined in ITU-T recommendation Q.704 and inANSI standard T1.111.4- 2001. The timer is startedwhen this end initiates a link force uninhibit. Thetimer is stopped when the signalling link uninhibit isacknowledged. Upon timer expiry, the uninhibit is

713


started again one more time. If it fails this time, theuninhibit is cancelled. The number of expiries of thistimer is indicated by the attribute forceUninhibit-Timeouts.

Class NA

Presence required

Visibility customer

Range [800..1500]

Data type Decimal

Initial value 800

inhibitAckTimer

Parameter name inhibitAckTimer

Domain

Description This attribute specifies the value of the timer T14defined in ITU-T recommendation Q.704 and in AN-SI standard T1.111.4-2001. This timer waits for in-hibition acknowledgement. The timer is startedwhen an Inhibit command is executed. The timer isstopped when the local link inhibit is denied or suc-cessful. Upon expiry, the local link inhibit request iscancelled.

Class NA

Presence required

Visibility customer

Range [2..3]

Data type Decimal

Initial value 2

initialAlignmentDelayTimer

Parameter name initialAlignmentDelayTimer

Domain

Description This attribute specifies the value of the timer T17defined in ITU-T recommendation Q.704 and in AN-SI standard T1.111.4-2001. It creates a delay toavoid oscillation of initial alignment failure and linkrestart. This timer is started when a signalling link isstarted. Upon timer expiry, it sends a START mes-sage to layer 2.

Class NA

714


Presence required

Visibility customer

Range [800..1500]

Data type Decimal

Initial value 800

ituOrigPointCode

Parameter name ituOrigPointCode

Domain

Description This attribute specifies the ITU point code of thenode that the MTP3 layer manages. The point codemust be provisioned in one of the following formats:basic: The point code is provisioned as a decimalnumber in the range 1..16383. segmented: Thepoint code is provisioned as three integers, separ-ated by dots. The first integer must be in the range0..7, the second integer must be in the range0..255, and the third integer must be in the range0..7. This attribute must not specify a point codeidentical to that specified by adjPointCode and dest-PointCode. Changing the value of this attributecauses all the linksets associated with this MTP3layer to be restarted.

Class NA

Presence optional

Visibility customer

Range { [0..4294967295], }


Initial value N.A.

mtpType

Parameter name mtpType

Domain

Description This attribute specifies the type of MTP3. The pos-sible values for mtpType are: mtp3 - This is thestandard MTP layer 3 from Q.704 that supports sig-nalling units up to 272 octets in length. mtp3b - Thisis the MTP layer 3 broadband variant that supportssignalling units up to 4096 octets in length. For theSS7 stack on the Iu interface this attribute must beset to mtp3b. For the SS7 stack on the Call Server

715


interface this attribute must be set to mtp3. Chan-ging the value of this attribute causes all the link-sets associated with the MTP3 layer to be restarted.

Class NA

Presence required

Visibility customer

Range mtp3, mtp3b


Initial value mtp3b

reroutingHoldOffTimer

Parameter name reroutingHoldOffTimer

Domain

Description This attribute specifies the timer value for the timerT6 defined in ITU-T recommendation Q.704 and inANSI standard T1.111.4- 2001. It provides delay toavoid message mis-sequencing on controlledrerouting. This timer is started when a signallingroute toward a given destination becomes availableand the controlled rerouting procedure is invoked.Upon timer expiry, traffic is restarted on the routemade available.

Class NA

Presence required

Visibility customer

Range [500..1200]

Data type Decimal

Initial value 800

routeSetTestRepeatTimer

Parameter name routeSetTestRepeatTimer

Domain

Description This attribute specifies the value of the timer T10defined in ITU-T recommendation Q.704 and in AN-SI standard T1.111.4-2001. It indicates the repeatfrequency of the route set test message. This timeris started when a signalling-route-set-test messageis sent after receiving a transfer-prohibited (TFP)message for a specific destination. Upon timer ex-piry, the signalling-route-set-test message is resent.The timer is sopped when a transfer-allowed (TFA)

716


message is received, indicating that the destinationhas become accessible.

Class NA

Presence required

Visibility customer

Range [30..60]

Data type Decimal

Initial value 30

secondAttemptChangebackAckTimer

Parameter name secondAttemptChangebackAckTimer

Domain

Description This attribute specifies the timer value for the timerT5 defined in ITU-T recommendation Q.704 and inANSI standard T1.111.4- 2001. It creates a delay toavoid oscillation of initial alignment failure and linkrestart. The timer is started when a link does notchangeback in the first attempt with firstAt-temptChangeBackAckTimer. The timer is stoppedwhen a link is in the second attempt of changebackand receives a changeback ack for every change-back declaration sent. Upon timer expiration,changeback is terminated. The number of expiriesof this timer is indicated by the attribute secondAt-temptChangebackAckTimeouts.

Class NA

Presence required

Visibility customer

Range [500..1200]

Data type Decimal

Initial value 500

sltAckTimer

Parameter name sltAckTimer

Domain

Description This attribute specifies the value of the Supervisiontimer to wait for a signalling link test acknowledge-ment message. This timer is started every time aSignalling Link Test Controller (SLTC) sends out atest message. The timer is stopped when the SLTCreceives an acknowledge message from the peer

717


MTP3 layer. Upon timer expiration, if this is the firstattempt, this timer is restarted and a second at-tempt is made. If the timer expires after the secondattempt, the MTP3 layer is informed of a brokenlink.

Class NA

Presence required

Visibility customer

Range [4..12]

Data type Decimal

Initial value 4

sltIntervalTimer

Parameter name sltIntervalTimer

Domain

Description This attribute specifies the value of the Intervaltimer defined in ITU-T recommendation Q.707 andANSI standard T1.111.7-2001 for sending signallinglink test messages. The timer is started when a linkcomes in service, and each time the timer expires ifthe link is still good. The timer is stopped when thelink fails, as determined by the sltAckTimer. Upontimer expiry, another test message is sent to thepeer and the timer is restarted.

Class NA

Presence required

Visibility customer

Range [30..90]

Data type Decimal

Initial value 30

uninhibitAckTimer

Parameter name uninhibitAckTimer

Domain

Description This attribute specifies the timer value for the timerT12 defined in ITU-T recommendation Q.704 and inANSI standard T1.111.4- 2001. The timer is startedevery time a link Uninhibit command is executed.The timer is stopped when the link uninhibit is ac-knowledged by the remote end. Upon timer expiry,the uninhibit is started again for a maximum of one

718


more time. If it fails this time, the uninhibit is can-celled. The number of expiries of this timer is indic-ated by the attribute uninhibitAckTimeouts.

Class NA

Presence required

Visibility customer

Range [800..1500]

Data type Decimal

Initial value 800

719


188 PsSs7Mtp3Connection (Mtp3Conn)





Parents:

EM - Ss7 - Sccp - Mtp3Conn

Child(ren):

-

Identifiers:

-

Links:


linkToServiceIndicator Ss7 Mtp3 ServInd

Parameters:

linkToServiceIndicator

Parameter name linkToServiceIndicator

Domain

Description This attribute specifies a link to an Ss7 Mtp3/n Ser-viceIndicator/n component for MTP 3 services.Changing this attribute will cause the application us-ing the MTP3 layer's services to be restarted.

Class NA

Presence required

Visibility customer

Range Ss7 Mtp3 ServInd


Initial value N.A.

720


721


189 PsSs7NailedupAdaptationPoint (Nap)






Parents:

EM - Ss7 - SaalNni - Nap

Child(ren):

-

Identifiers:

-

Links:




• AtmIf Vcc Nep

•

Parameters:

atmConnection


Domain

Description This attribute specifies a link to an AtmIf Vcc Nepcomponent that provides access to an ATM net-work.

Class NA

Presence required

Visibility customer

722




Initial value N.A.

723


190 PsSs7RemoteSubsystem (Rem)






Parents:

EM - Ss7 - Sccp - Rem

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 Sccp/n RemoteSubsystem This optional com-ponent represents a remote subsystem that can beaccessed by this Ss7SignallingConnControlPartcomponent.

Class NA

Presence required

Visibility customer

Unit

724


Range [0..255]

Data Type Decimal

Initial Value

pointCodeList

Parameter name pointCodeList

Domain

Description This attribute specifies a list of point codes associ-ated with this Ss7RemoteSubsystem component.The point code must be provisioned in one of thefollowing formats, where the ITU vs ANSI vs TCCtype is specified by the MessageTransferPartLay-er3 protocolVariant attribute: basic: The point codeis provisioned as a decimal number in the range1..16383 for ITU point code types or 1..16777215for ANSI point code types or 1..65535 for TTC pointcode types. A value of 0 is not valid. segmented:The point code is provisioned as three integers,separated by dots. For ITU point codes, the first in-teger must be in the range 0..7, the second integermust be in the range 0..255, and the third integermust be in the range 0..7. For ANSI point codes,the first integer must be in the range 0..255, thesecond integer must be in the range 0..255, and thethird integer must be in the range 0..255. For TTCpoint codes, the first integer must be in the range0..31, the second integer must be in the range0..15, and the third integer must be in the range0..127. A value of 0.0.0 is not valid.

Class NA

Presence required

Visibility customer

Range { [1..16383], }

Data type Variable[256] List of IntegerSequence

Initial value N.A.

subsystemNumber

Parameter name subsystemNumber

Domain

Description This attribute specifies the subsystem number ofthe remote subsystem represented by theSs7RemoteSubsystem component.

725


Class NA

Presence required

Visibility customer

Range ranap, rnsap


Initial value ranap

726


191 PsSs7Route (Ro)






Parents:

EM - Ss7 - Mtp3 - Rs - Ro

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


linkToLinkset Ss7 Mtp3 Ls Ri

Parameters:

rdnId


Domain

Description Ss7 Mtp3/n Routeset/n Route/n This componentrepresents an MTP3 route that conveys signallinginformation between two signalling points using aspecific adjacent signalling point.

Class NA

Presence required

Visibility customer

727


Unit

Range [0..1]

Data Type Decimal

Initial Value

linkToLinkset

Parameter name linkToLinkset

Domain

Description This attribute specifies the link to the linkset thatthis route uses to reach the next transfer point. Thisattribute must specify a Ss7 Mtp3/n Linkset/nRouteinfo component. Changing the value of thisattribute causes the route to be restarted.

Class NA

Presence required

Visibility customer

Range Ss7 Mtp3 Ls Ri


Initial value N.A.

priority

Parameter name priority

Domain

Description This attribute specifies the route priority in relationto the other routes defined under the routeset. Theroute with the lower priority value (for example "1")is used to carry the traffic. If two routes are definedwith equal priority then loadsharing is performedacross the two routes.

Class NA

Presence required

Visibility customer

Range [1..255]

Data type Decimal

Initial value 1

728


192 PsSs7RouteInfo (Ri)






Parents:

EM - Ss7 - Mtp3 - Ls - Ri

Child(ren):

-

Identifiers:

-

Links:


Parameters:

linkToRoute

Parameter name linkToRoute

Domain

Description This attribute specifies a list of links to routes thatuse this linkset to reach one of several destinationsignalling points.

Class NA

Presence required

Visibility customer

Range Ss7 Mtp3 Rs Ro


Initial value N.A.

729


730


193 PsSs7Routeset (Rs)






Parents:

EM - Ss7 - Mtp3 - Rs

Child(ren):

Ro -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 Mtp3/n Routeset/n This component representsan MTP3 routeset. A routeset is a grouping ofroutes that are used to transfer signalling betweenthis node and a specific destination signalling point.

Class NA

Presence required

Visibility customer

Unit

731


Range [0..255]

Data Type Decimal

Initial Value

destPointCode


Domain

Description This attribute specifies the point code of the destin-ation node that is reached through this routeset.The point code must be provisioned in one of thefollowing formats, where the ITU vs ANSI vs TCCtype is specified by the MessageTransferPartLay-er3 Linkset protocolVariant attribute: basic: Thepoint code is provisioned as a decimal number inthe range 1..16383 for ITU point code types or1..16777215 for ANSI point code types. A value of 0is not valid. segmented: The point code is provi-sioned as three integers, separated by dots. ForITU point codes, the first integer must be in therange 0..7, the second integer must be in the range0..255, and the third integer must be in the range0..7. For ANSI point codes, the first integer must bein the range 1..255, the second integer must be inthe range 0..255, and the third integer must be inthe range 0..255. A value of 0.0.0 is not valid. Thisattribute must not specify a point code identical tothat specified by origPointCode and adjPointCode.Changing the value of this attribute causes thisrouteset and associated routes to be restarted.

Class NA

Presence required

Visibility customer

Range { [1..16383], }


Initial value N.A.

networkIndicator


Domain

Description This attribute specifies whether the network is a na-tional network, or an international network. Chan-ging the value of this attribute causes the routeset

732


to be restarted. Each meaning of each valid valuefor networkIndicator is described in ITU-T recom-mendation Q.704 and ANSI standard T1.111.4-2001. international - MTP3 node is a member of an"International" network. internationalSpare - MTP3node is a member of an "International Spare" net-work. national - MTP3 node is a member of a "Na-tional" network. nationalSpare - MTP3 node is amember of a "National Spare" network.

Class NA

Presence required

Visibility customer




protocolVariant


Domain

Description This attribute specifies the SS7 protocol variant. Inaddition to controlling internal protocol behaviour,this attribute determines whether the Point Codesassociated with this Routeset have a maximumrange of 16383 (7.255.7) for ITU or 16777215(255.255.255) for ANSI.

Class NA

Presence required

Visibility customer

Range itu, ansi


Initial value itu

733


194 PsSs7SaalNni (SaalNni)






Parents:

EM - Ss7 - SaalNni

Child(ren):

DstPvc - Nap - SrcPvc - Stp -

Identifiers:


MaxIn-stances


Links:


linkToLinkInLinkset Ss7 Mtp3 Ls Lk

Parameters:

rdnId


Domain

Description Ss7 SaalNni/n This component represents theSAAL-NNI layer that provides an adaptation layer torun signalling traffic over ATM using AAL5.

Class NA

Presence required

Visibility customer

Unit

734


Range [1..1024]

Data Type Decimal

Initial Value

alignmentAcceptTimer

Parameter name alignmentAcceptTimer

Domain

Description This attributes specifies the total time to attemptalignment, as defined in ITU-T recommendationQ.2140 and ANSI standard T1.645-1995. This timeris started when the SAAL-NNI layer receives a re-quest from its user to establish the link. This timer isstopped in one of the following cases: - the SAAL-NNI layer completes the alignment procedure - theSAAL-NNI user releases the link - the SAAL-NNIlayer management releases the link Upon timer ex-piration, the alignment procedure is cancelled andthe link is released. The value of this timer can beadjusted if link proving fails due to an inability tosend the target number proving PDUs indicated bythe targetProvingPdus attribute. The current num-ber of proving PDUs sent successfully is indicatedby the currentProvingPdus attribute.

Class NA

Presence required

Visibility customer

Range [5..150]

Data type Decimal

Initial value 30

ccTimer

Parameter name ccTimer

Domain

Description This attribute specifies the time between transmis-sions of 'BGN', 'END', 'RS' and 'ER' PDUs, asdefined in ITU-T recommendation Q.2110 and ANSIstandard T1.637-1999. The timer is started whenany one of these PDUs is transmitted. The timer isstopped when a proper acknowledgement is re-ceived (e.g. BGNAK, ENDAK, RSACK, or ERACK).Upon timer expiry the PDU will be retransmitted.The PDU is transmitted a maximum of maxCc

735


times. If the timer expires maxCc times, the link willbe released, and the and the number of times thishappens will be indicated by the attribute max-CcReached. Layer 3 will attempt to bring the linkback up.

Class NA

Presence required

Visibility customer

Range [100..1000]

Data type Decimal

Initial value 200

idleTimer

Parameter name idleTimer

Domain

Description This attribute specifies the idle time after receipt ofa STAT PDU, as defined in ITU-T recommendationQ.2110 and ANSI standard T1.637-1999. The timeris started when a STAT PDU is received. The timeris stopped when data is sent or received on the link.Upon expiry, a POLL PDU is sent and the noRe-sponseTimer is started. The value of the idleTimermust be greater that the sum of the pollTimer andthe maximum round trip delay of a PDU.

Class NA

Presence required

Visibility customer

Range [100..1000]

Data type Decimal

Initial value 100

keepAliveTimer

Parameter name keepAliveTimer

Domain

Description This attribute specifies the time between sending ofPOLL PDUs when there is no activity on the link, asdefined in ITU-T recommendation Q.2110 and ANSIstandard T1.637-1999. The timer is started wheneither the pollTimer or the keepAliveTimer expiresand there are no PDUs queued for sending. Thetimer is stopped when a data request (SD PDU) is

736


ready to be sent. Upon expiry this timer sends aPOLL PDU. The value of keepAliveTimer should beset to a value greater that pollTimer and greaterthan the round-trip delay of a PDU.

Class NA

Presence required

Visibility customer

Range [100..1000]

Data type Decimal

Initial value 100

linkReEstablishTimer

Parameter name linkReEstablishTimer

Domain

Description This attributes specifies the time between the linkrelease action and the next link re-establish actionduring alignment, as defined in ITU-T recommenda-tion Q.2140 and ANSI standard T1.645-1995. Thistimer is started if either the local or remote SAAL-NNI layer releases the link during the alignmentprocedure. This timer is stopped in one of the fol-lowing cases: - the SAAL-NNI layer establishes thelink with its peer - the SAAL-NNI user releases thelink - the SAAL-NNI layer management releases thelink - the alignment interval expires Upon timer ex-piration, if the alignment interval has not expired,the link alignment is re-started.

Class NA

Presence required

Visibility customer

Range [0..30]

Data type Decimal

Initial value 5

linkToLinkInLinkset

Parameter name linkToLinkInLinkset

Domain

Description This attribute specifies a linkage between an Ss7Mtp3/n LinkSet/n Link/n component and an Ss7SaalNni/n component.

737


Class NA

Presence required

Visibility customer

Range Ss7 Mtp3 Ls Lk


Initial value N.A.

maxCc

Parameter name maxCc

Domain

Description This attribute specifies the maximum number of al-lowed unacknowledged transmissions of 'BGN','END', 'ER' or 'RS' Protocol Data Units (PDUs) asdefined in ITU-T recommendation Q.2110 and ANSIstandard T1.637-1999. If the number of unacknow-ledged transmissions exceeds this value, the linkwill be released, and the number of times this hap-pens will be indicated by the attribute max-CcReached.

Class NA

Presence required

Visibility customer

Range [1..1000]

Data type Decimal

Initial value 4

maxPdusBetweenPolls

Parameter name maxPdusBetweenPolls

Domain

Description This attribute specifies the maximum number ofSignalling Data PDUs that can be sent withoutsending a POLL PDU, as defined in ITU-T recom-mendation Q.2110 and ANSI standardT1.637-1999.

Class NA

Presence required

Visibility customer

Range [1..1000]

Data type Decimal

738


Initial value 500

noResponseTimer

Parameter name noResponseTimer

Domain

Description This attribute specifies the time interval duringwhich at least one STAT PDU should be received,as defined in ITU-T recommendation Q.2110 andANSI standard T1.637-1999. The timer is startedwhen a POLL PDU is sent. The timer is stoppedwhen a STAT PDU is received. Upon timer expiry,the link is released, that is, brought out of service.Layer 3 will then attempt to bring it back to service.The value of the noResponseTimer must not beless than the sum of the keepAliveTimer and oneround-trip delay of a Protocol Data Unit (PDU). Thenumber of expiries of this timer is indicated by theattribute noResponseTimeouts.

Class NA

Presence required

Visibility customer

Range [500..2000]

Data type Decimal

Initial value 1500

pollTimer

Parameter name pollTimer

Domain

Description This attribute specifies the time between sending ofPOLL PDUs when the link has traffic, as defined inITU-T recommendation Q.2110 and ANSI standardT1.637-1999. The timer is started when the linkenters the Data Transfer Ready State. The timer isstopped when the link is released. Upon expiry, aPOLL PDU is sent and pollTimer is restarted if thelink has traffic.

Class NA

Presence required

Visibility customer

Range [100..1000]

Data type Decimal

739


Initial value 100

provingMode

Parameter name provingMode

Domain

Description This attribute allows the operator to place the linkinto one of the link proving modes defined in ITU-Trecommendation Q.2140 and ANSI standardT1.645-1995. normal - This mode corresponds tothe MAAL- FORCE_PROVING-request. It forcesthe SAAL-NNI layer to utilize proving when bringingup the link. neutral - This mode corresponds to theMAAL- CLEAR_FORCE_MODES request. It spe-cifies that the layer using SAAL-NNI will select theproving mode. emergency - This mode correspondsto the MAAL- FORCE_EMERGENCY-request. Itcauses proving to be skipped. When this attribute isset to neutral, the SAAL-NNI user selects the prov-ing mode. When the attribute is set to normal oremergency, the proving mode indicated by theSAAL-NNI user is ignored.

Class NA

Presence required

Visibility customer

Range normal, neutral, emergency


Initial value neutral

740


195 PsSs7ServiceIndicator (ServInd)






Parents:

EM - Ss7 - Mtp3 - ServInd

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


linkToMtp3Connection • Ss7 Sccp M3uaConn

•

Parameters:

rdnId


Domain

Description Ss7 Mtp3/n ServiceIndicator/<service indicator>This component represents an MTP layer 3 serviceindicator. A service indicator is a logical identifierthat represents a particular user of MTP layer 3 ser-vices. The SS7 specifications define which usersare required to use a given service indicator. Onlyone application can use a particular MTP layer 3service indicator.

741


Class NA

Presence required

Visibility customer

Unit

Range 3, 12

Data Type MixedDecimal

Initial Value

linkToMtp3Connection

Parameter name linkToMtp3Connection

Domain

Description This attribute specifies a link to the application us-ing the service represented by this service indicator.This attribute must specify either Ss7 SccpMtp3Connection or Ss7 Alcap Mtp3Connection.Ss7 SccpMtp3Connection must be used for Ss7Mtp3/n ServiceIndicator/3 and Ss7 AlcapMtp3Connection must be used for Ss7 Mtp3/n Ser-viceIndicator/12. Changing the value of this attributecauses all the linksets associated with this MTP3layer to be restarted.

Class NA

Presence required

Visibility customer

Range Ss7 Sccp M3uaConn, Ss7 Sccp Mtp3Conn


Initial value N.A.

742


196 PsSs7SignallingConnControlPart (Sccp)






Parents:

EM - Ss7 - Sccp

Child(ren):

Loc - M3uaConn - Mtp3Conn - Rem -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 SignallingConnControlPart/n This componentrepresents the SCCP layer of the SS7 stack.

Class NA

Presence required

Visibility customer

Unit

Range [1..16]

743


Data Type Decimal

Initial Value

classOfService

Parameter name classOfService

Domain

Description This attribute specifies the type of service providedby the SCCP layer. The different service classesare: 0 - This class represents basic connectionlessservice. 2- This class represents basic connection-ori-ented service. Any combination of these classescan be provisioned by the user, but at least oneclass must be specified.

Class NA

Presence required

Visibility customer

Range 0, 2

Data type Set of

Initial value 0,2

maxConnections

Parameter name maxConnections

Domain

Description This attribute specifies the maximum number of sig-nalling connections supported by an SCCP instanceacross all the local subsystems. The current num-ber of open signalling connections is indicated bythe attribute activeConnections. The number oftimes a signalling connection establishment was re-fused because the number of open connections hasreached the maximum value is indicated by the at-tributes rejectedIncomingConnections and rejec-tedIncomingConnections . Changes to this attributeaffect only new connections. No existing connec-tions will be affected by any changes made to thisattribute.

Class NA

Presence required

Visibility customer

Range [1000..200000]

Data type Decimal

744


Initial value 16000

timerConnEst

Parameter name timerConnEst

Domain

Description This attribute specifies the value of the TConnEsttimer defined in the ITU-T spec Q.714 and ANSIstandard T1.112.4-2001. This is the period of timeto wait for a connection confirm message from theremote user of SCCP. This timer is started when aconnect request message is sent to the remoteSCCP layer. This timer is stopped when either aconnect confirM, released, or connect refused mes-sage is received, or when a routing failure happens.Upon timer expiration, the resources associatedwith the connection are released and a disconnectmessage is sent to the local user(s). The number oftimeouts of this timer is indicated by the attributeconnEstTmouts.

Class NA

Presence required

Visibility customer

Range [60..120]

Data type Decimal

Initial value 60

timerInactivityReceive

Parameter name timerInactivityReceive

Domain

Description This attribute specifies the value of the inactivity re-ceive timer defined in ITU-T spec Q.714 and ANSIstandard T1.112.4-2001. This is the period of timeto wait on receiving a message for a connection,before releasing the connection. This timer is star-ted when a connect confirm or CONNECT RE-SPONSE message is received. This timer is restar-ted if a data FORM 1 or inactivity test message isreceived. This timer is stopped when a disconnect,releaseD, or error message is received, or when arouting failure occurs. If this timer expires on anopen connection, a disconnect message is sent andthe resources are released. It is recommended thatthe timer be set to a value that is twice as long as

745


tIasTimer. The number of timeouts of this timer isindicated by the attribute inactivityReceiveTimeouts.

Class NA

Presence required

Visibility customer

Range [660..1260]

Data type Decimal

Initial value 660

timerInactivitySend

Parameter name timerInactivitySend

Domain

Description This attribute specifies the value of the Tias timerdefined in ITU-T spec Q.714 and ANSI standardT1.112.4-2001. This is the period of time to wait be-fore sending an inactivity test message for a con-nection when there are no messages to send. Thetimer is started when a connect confirm or CON-NECT RESPONSE message is received. The timeris restarted if a data FORM 1 message is transmit-ted. This timer is stopped when a disconnect, re-lease complete or error message is received, orwhen a routing failure occurs. If the timer expires onan open connection, an INACTIVITY TEST mes-sage is sent. It is recommended that the timer beset to a value that is half as long as the tIarTimer.

Class NA

Presence required

Visibility customer

Range [300..600]

Data type Decimal

Initial value 300

timerRel

Parameter name timerRel

Domain

Description This attribute specifies the value of the releasetimer defined in ITU- T spec Q.714 and ANSI stand-ard T1.112.4-2001. This is the period of time to waitfor a RELEASE COMPLETE message in responseto the initial release attempt. This timer is started

746


when a RELEASED message is sent. This timer isstopped when a release complete or ERROR mes-sage is received, or on a routing failure. Upon timerexpiration, a RELEASE message is sent and thetRepeatRelTimer is started. The number of timeoutsof this timer is indicated by the attribute tRel-Timeouts.

Class NA

Presence required

Visibility customer

Range [10..20]

Data type Decimal

Initial value 10

timerRepeatRel

Parameter name timerRepeatRel

Domain

Description This attribute specifies the value of the repeat re-lease timer defined in ITU-T spec Q.714 and ANSIstandard T1.112.4-2001.. This is the period of timeto wait for a release complete message after tRel-Timer has expired. This timer determines the inter-val between successive release retries. This timeris started when tRelTimer expires. This timer isstopped when a release complete or an ERRORmessage is received, or when a routing failure oc-curs. Upon timer expiration, the timer is restartedfor a maximum of ten times. Upon the tenth timerexpiration, the resources are released. The numberof timeouts of this timer is indicated by the attributetRepeatRelTimeouts.

Class NA

Presence required

Visibility customer

Range [10..20]

Data type Decimal

Initial value 10

747


197 PsSs7SpvcTerminationPoint (Stp)






Parents:

EM - Ss7 - SaalNni - Stp

Child(ren):

-

Identifiers:

-

Links:


Parameters:

softPvcRetryPeriod


Domain


Class NA

Presence required

Visibility customer

Range [10..3600]

Data type Decimal

Initial value 20

748


749


198 PsSs7SrcPvc (SrcPvc)






Parents:

EM - Ss7 - SaalNni - SrcPvc

Child(ren):

Tm -

Identifiers:

-

Links:


Parameters:

calledAddress


Domain


Class NA

Presence required

Visibility customer

Range [40..40]

Data type HexString

Initial value N.A.

750


calledVpiVci


Domain

Description If the destination endpoint is an AtmIf Vcc, this at-tribute specifies the called VPI.VCI of the destina-tion AtmIf Vcc.

Class NA

Presence required

Visibility customer

Range { [0..4095],[0..65535], }


Initial value N.A.

remoteSaalNniIdentifier

Parameter name remoteSaalNniIdentifier

Domain

Description If the destination endpoint is a SaalNni componenton another RNC, this attribute specifies the in-stance of the remote SaalNni component.

Class NA

Presence required

Visibility customer




751


199 RspLpNpu (Npu)






Parents:

EM - Lp - Npu

Child(ren):

-

Identifiers:

-

Links:


Parameters:

serviceBundleName

Parameter name serviceBundleName

Domain

Description This attribute specifies the name of the servicebundle to be used for a 16pOC3PosAtm card. The16pOC3PosAtm card is the only card that requiresthe provisioning of the Npu component which con-tains this attribute. For a 16pOC3PosAtm card, thisattribute must be set to one of the followings: allSer-vices mplsAtmIp porsAtmIp Both the mplsAtmIpand porsAtmIp bundles have support for the atm-Core, ip, and atmTrunks features. Service bundlemplsAtmIp, in addition, supports all the MPLS re-lated features including mplsLdp, mplsRsvpTe,mplsStaticLsp, mplsTeEmulation,l2vpnAtmAccessFpSp and rfc2547bis. This service

752


bundle does not support the porsTrunk feature. Ser-vice bundle porsAtmIp, in addition, supports theporsTrunk feature. This service bundle does notsupport any of the MPLS features. Service bundleallServices has no feature support restrictions. Itsupports all the services that run on the card. Thisservice bundle cannot be used with cards whoseproduct code start with NTHW44. Because allSer-vices has support for all the services that run on thecard, it is the service bundle of choice for the16pOC3PosAtm cards whose product code do notstart with NTHW44. However, one of mplsAtmIp orporsAtmIp must be used on a card if there is a needto have it interchangeable with a card havingproduct code NTHW44. The serviceBundleNameattribute has a default setting of serviceBundleNot-Defined. The user must change this setting to a val-id service bundle that is appropriate for the cardand can support the features in the Sw Lpt featurel-ist attribute. A change to the serviceBundleNameattribute is a critical change to the Lp componentonly on cards whose product code start withNTHW44.

Class NA

Presence required

Visibility customer

Range serviceBundleNotDefined, allServices, mplsAtmIp,porsAtmIp


Initial value serviceBundleNotDefined

753


200 SaalUni (SaalUni)






Parents:

EM - Iub - Sig - SaalUni

Child(ren):


Identifiers:

-

Links:


Parameters:

754


201 ScsLogicalProcessorType (Lpt)






Parents:

EM - Sw - Lpt

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Sw Lpt/<name> This component is the Logical Pro-cessor Type, specifying characteristics of the soft-ware to be loaded on a card. Minimally, LPT/CP isrequired to exist. If it is deleted, semantic checkswill fail.

Class NA

Presence required

Visibility customer

755


Unit

Range [1..25]


Initial Value

commentText


Domain

Description An arbitrary string used to enter a comment aboutan LPT.

Class NA

Presence required

Visibility customer

Range [0..80]


Initial value

featureList

Parameter name featureList

Domain

Description This attribute specifies a list of names of Featuresthat define a particular configuration of applicationfunctionality that the user wants to load on a singleprocessor. The combination of Features selectedmust be compatible (for example, none can be mu-tually exclusive with another in the list). All Featuresmust belong to an AV specified in the AVL. All Fea-tures must be able to be loaded on any of the Cardswhich are linked to LPs which are linked to thisLPT. All prerequisite Features of the ones in this listwill also be loaded.

Class NA

Presence required

Visibility customer

Range [1..30]

Data type Variable[variable] List of AsciiString

Initial value N.A.

756


systemConfig

Parameter name systemConfig

Domain

Description This attribute specifies which set of pre-configuredsystem parameters to use for the set of Featuresselected in featureList.

Class NA

Presence required

Visibility customer

Range default


Initial value default

757


202 ScsSoftware (Sw)





Parents:

EM - Sw

Child(ren):

Lpt -

Identifiers:

-

Links:


Parameters:

checksum

Parameter name checksum

Domain

Description This attribute specifies whether the checksum func-tionality is turned on or off. When the attribute isturned on, the checksum functionality will be in-voked for the Start Software Download command.When the attribute is turned off, the checksum func-tionality will not be invoked for the Start SoftwareDownload command.

Class NA

Presence required

Visibility customer

Range off, on


758


Initial value off

759


203 Sdh (Sdh)






Parents:

EM - Lp - Sdh

Child(ren):

Om - Vc4 -

Identifiers:


MaxIn-stances


Links:


lineAutomaticProtection-Switch • Laps

•

Parameters:

rdnId


Domain

Description Lp/n Sdh/n This component controls a port usingthe SDH hierachy. In particular, it deals with SDHmedium, section and line layers. A Path componentmay be automatically created when an Sdh com-ponent is added on a some Nortel NetworksMultiservice Switch 7400 FPs. The Path componentis used only on FPs that do not support Virtual Con-tainer (VC).

760


Class NA

Presence required

Visibility customer

Unit

Range [0..15]

Data Type Decimal

Initial Value

clockingSource

Parameter name clockingSource

Domain

Description This attribute defines the type of clocking sourceused for synchronizing the transmit clock: localmeans direct use of the local clock oscillator at itscentre frequency; line means the use of a signalphase-locked to the incoming line rate; modulemeans the use of a signal phase-locked to the CPreference clock. When adding a Sonet or Sdh com-ponent, the clockingSource attribute is set to mod-ule if the NetworkSynchronization component hasbeen added and is set to local otherwise. Note thatthe multiport cell-based cards have one commonclock source for each of the three ports when eitherthe clocking source local or module is selected. Forthis reason, it is not allowed to have at the sametime the clockingSource attribute set to local on oneport and module on another port. Furthermore, theclockingSource attribute cannot be set to module ifthe NetworkSynchronization component has notbeen added.

Class NA

Presence required

Visibility customer

Range local, line, module


Initial value N.A.

commentText


Domain


761


Class NA

Presence required

Visibility customer

Range [0..60]


Initial value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

expectedRxSectionTrace

Parameter name expectedRxSectionTrace

Domain

Description This attribute specifies the expected section traceidentifier which is used to identify the fiber connec-ted to the associated port. This attribute must matchthe corresponding txSectionTrace provisioned at

762


the transmitting equipment end. If it does not, analarm is issued. The functionality supported by thisattribute is not available.

Class NA

Presence required

Visibility customer

Range [0..15]


Initial value

ifAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up



Domain


Class NA

Presence required

Visibility customer

Range no, yes


763


Initial value no

lineAutomaticProtectionSwitch

Parameter name lineAutomaticProtectionSwitch

Domain

Description This attribute specifies the name of the Laps com-ponent. In the case of intra-card configurations, thespecified Laps component is used to provide spar-ing of lines which use this port and its mate; in thecase of inter-card configurations, the specified Lapscomponent is used to provide sparing of lines only.

Class NA

Presence optional

Visibility customer

Range Laps, Laps

Data type Link

Initial value N.A.

s1RxDefault

Parameter name s1RxDefault

Domain

Description This attribute specifies the default S1 byte reportedby the port when the received S1 byte is 0 (qualityunknown). No default is applied when this attributeis set to none.

Class NA

Presence required

Visibility customer



Initial value none

s1RxOverride

Parameter name s1RxOverride

Domain

Description This attribute specifies the S1 byte value reportedby the port regardless of the received value.Changes in S1 byte on the port are ignored when

764


this attribute is set to a value other than none.

Class NA

Presence required

Visibility customer



Initial value none

s1TxOverride

Parameter name s1TxOverride

Domain

Description This attribute specifies the S1 byte transmitted onthe port regardless of the Synchronization StatusMessage (SSM) value provided by the NetworkSyn-chronization component. Changes in SSM valuefrom the NetworkSynchronization component areignored when this attribute is set to a value otherthan none.

Class NA

Presence required

Visibility customer



Initial value none

txSectionTrace

Parameter name txSectionTrace

Domain

Description This attribute specifies the section identifier. Thestring must be constructed with 7-bit charactersonly. The section identifier is prefixed by a CRCbyte and padded with null characters if necessary toform the 16-octet section trace message transmit-ted in byte J0 of 16 outgoing frames. At the remoteend, the section trace is reassembled, the CRC ischecked and the message is compared to the ex-pectedRxSectionTrace attribute. If a mismatch isdetected, an alarm is issued. Usage guidelines forthe section trace are found in clause 3 of the ITUG.831 standard which defines the Access PointIdentifier format. The functionality supported by this

765


attribute is not available.

Class NA

Presence required

Visibility customer

Range [0..15]


Initial value

vendor


Domain


Class NA

Presence required

Visibility customer

Range [0..20]


Initial value

766


204 Shelf (Shelf)





Parents:

EM - Shelf

Child(ren):

Card -

Identifiers:

-

Links:


Parameters:

commentText


Domain

Description This is an arbitrary string that can be used to spe-cify the location of the module. It is not used by thesystem.

Class NA

Presence required

Visibility customer

Range [0..80]


Initial value

cpEquipmentProtection

767


Parameter name cpEquipmentProtection

Domain

Description This attribute specifies the type of Equipment Pro-tection support provided by a spared CP configura-tion. The valid values are: hot, enables delivery ofprovisioning data to standby CP and on CPSO al-lows switching to the current view. cold, the defaultvalue which supports switchover to the committedview. Note:This value is not supported in RNC any-more. When the attribute is set to hot, applicationswhich provide hot or warm CP based services, re-ceive the provisioning data during activate prov.The cold CP based services receive the provision-ing data during CP switchover, when the standbyCP is taking over as active. On CPSO, hot andwarm services are activated first followed by thecold services. Hence the activation time of cold ser-vices is potentially extended which will increase theservice outage, compared to when this attribute isset to cold. It is important to note that this attributedoes not make any service warm or hot; instead,CP based services are provided the ability to re-duce or eliminate call-setup outage due to a CPSOand to ensure stable calls are unaffected by aCPSO. The standby CP will be reset when thevalue of this attribute is changed. To set this attrib-ute to hot, the maxNumberJournalFiles attribute un-der the ProvisioningSystem component must be setto a value other than none.

Class NA

Presence required

Visibility customer

Range cold, hot


Initial value cold

repeatFanAlarm

Parameter name repeatFanAlarm

Domain

Description On the Nortel Networks Multiservice Switch 15000and the Nortel Networks Multiservice Switch 20000,there are three fans to cool the shelf. Because of ahardware limitation, it is not possible to determinehow many fans are affected upon fan failure. Suchfan failures are reported through a 7012 0051

768


alarm. This attribute specifies whether the 70120051 alarm should be set once or repeated on aregular basis: on - specifies that the fan alarmshould be re-issued every eight hours until thealarm is cleared. Normally, the same alarm is neverre-issued in order to minimize the number of alarmsgenerated by a node. Nonetheless, selecting thisoption helps to compensate for the hardware limita-tion by providing a regular reminder (once per eighthour shift) that one or possibly more fans havefailed on this node. In addition, if the alarm condi-tion remains for more than 24 hours, the alarmseverity is increased. That is, the first three alarmsare issued with a severity of MAJOR, while all sub-sequent alarms have a severity of CRITICAL. off -specifies that the fan alarm be issued only onceupon failure. This attribute is not applicable and istherefore ignored on the Nortel Networks Multiser-vice Switch 7400.

Class NA

Presence required

Visibility customer

Range off, on


Initial value off

769


205 SignallingBearer (Sig)






Parents:

EM - Iub - Sig

Child(ren):

SaalUni -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description IubIf/n Sig/n This component represents the C-Plane part of the UTRAN interface. An instance of itcan be the SAAL-UNI connection used for the Iub.

Class NA

Presence required

Visibility customer

Unit

Range [0..6]

770


Data Type Decimal

Initial Value

771


206 SignallingSystem7 (Ss7)






Parents:

EM - Ss7

Child(ren):

M3ua - Mtp3 - SaalNni - Sccp - Sctp -

Identifiers:

-

Links:


Parameters:

772


207 Sonet (Sonet)






Parents:

EM - Lp - Sonet

Child(ren):

Om - Sts -

Identifiers:


MaxIn-stances


Links:


lineAutomaticProtection-Switch • Laps

•

Parameters:

rdnId


Domain

Description Lp/n Sonet/n This component controls a port usingthe SONET hierarchy. In particular, it deals withSONET medium, section, and line layers. On aNortel Networks Multiservice Switch 7400, a Pathcomponent can sometimes be automatically cre-ated under the Sonet component.

Class NA

773


Presence required

Visibility customer

Unit

Range [0..15]

Data Type Decimal

Initial Value

clockingSource

Parameter name clockingSource

Domain

Description This attribute defines the type of clocking sourceused for synchronizing the transmit clock: localmeans direct use of the local clock oscillator at itscentre frequency; line means the use of a signalphase-locked to the incoming line rate; modulemeans the use of a signal phase-locked to the CPreference clock. When adding a Sonet or Sdh com-ponent, the clockingSource attribute is set to mod-ule if the NetworkSynchronization component hasbeen added and is set to local otherwise. Note thatthe multiport cell-based cards have one commonclock source for each of the three ports when eitherthe clocking source local or module is selected. Forthis reason, it is not allowed to have at the sametime the clockingSource attribute set to local on oneport and module on another port. Furthermore, theclockingSource attribute cannot be set to module ifthe NetworkSynchronization component has notbeen added.

Class NA

Presence required

Visibility customer

Range local, line, module


Initial value N.A.

commentText


Domain


Class NA

774


Presence required

Visibility customer

Range [0..60]


Initial value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

expectedRxSectionTrace

Parameter name expectedRxSectionTrace

Domain

Description This attribute specifies the expected section traceidentifier which is used to identify the fiber connec-ted to the associated port. This attribute must matchthe corresponding txSectionTrace provisioned atthe transmitting equipment end. If it does not, an

775


alarm is issued. The functionality supported by thisattribute is not available.

Class NA

Presence required

Visibility customer

Range [0..15]


Initial value

ifAdminStatus


Domain


Class NA

Presence required

Visibility customer



Initial value up



Domain


Class NA

Presence required

Visibility customer

Range no, yes


776


Initial value no

lineAutomaticProtectionSwitch

Parameter name lineAutomaticProtectionSwitch

Domain

Description This attribute specifies the name of the Laps com-ponent. In the case of intra-card configurations, thespecified Laps component is used to provide spar-ing of lines which use this port and its mate; in thecase of inter-card configurations, the specified Lapscomponent is used to provide sparing of lines only.

Class NA

Presence optional

Visibility customer

Range Laps, Laps

Data type Link

Initial value N.A.

s1RxDefault

Parameter name s1RxDefault

Domain

Description This attribute specifies the default S1 byte reportedby the port when the received S1 byte is 0 (qualityunknown). No default is applied when this attributeis set to none.

Class NA

Presence required

Visibility customer



Initial value none

s1RxOverride

Parameter name s1RxOverride

Domain

Description This attribute specifies the S1 byte value reportedby the port regardless of the received value.Changes in S1 byte on the port are ignored when

777


this attribute is set to a value other than none.

Class NA

Presence required

Visibility customer



Initial value none

s1TxOverride

Parameter name s1TxOverride

Domain

Description This attribute specifies the S1 byte transmitted onthe port regardless of the Synchronization StatusMessage (SSM) value provided by the NetworkSyn-chronization component. Changes in SSM valuefrom the NetworkSynchronization component areignored when this attribute is set to a value otherthan none.

Class NA

Presence required

Visibility customer



Initial value none

txSectionTrace

Parameter name txSectionTrace

Domain

Description This attribute specifies the section identifier. Thestring must be constructed with 7-bit charactersonly. The section identifier is prefixed by a CRCbyte and padded with null characters if necessary toform the 16-octet section trace message transmit-ted in byte J0 of 16 outgoing frames. At the remoteend, the section trace is reassembled, the CRC ischecked and the message is compared to the ex-pectedRxSectionTrace attribute. If a mismatch isdetected, an alarm is issued. Usage guidelines forthe section trace are found in clause 3 of the ITUG.831 standard which defines the Access PointIdentifier format. The functionality supported by this

778


attribute is not available.

Class NA

Presence required

Visibility customer

Range [0..15]


Initial value

vendor


Domain


Class NA

Presence required

Visibility customer

Range [0..20]


Initial value

779


208 TerminateSPvpAndSPvc (TermSP)






Parents:

EM - AtmIf - Uni - Addr - TermSP

EM - AtmIf - Pnni - Addr - TermSP

Child(ren):

-

Identifiers:

-

Links:


Parameters:

780


209 Uplane (IuUplane)





Parents:

EM - Iur - IuUplane

EM - Iub - IuUplane

EM - Iucs - IuUplane

Child(ren):

Aal2Lk - IpLk -

Identifiers:

-

Links:


Parameters:

781


210 VirtualRouter (Vr)






Parents:

EM - Vr

Child(ren):

Dsd - Ip - Mm - Pp -

Identifiers:


MaxIn-stances


Links:


virtualRouterProcessor • Lp

•

Parameters:

rdnId


Domain

Description Vr/<string> The VirtualRouter component repres-ents an instance of a Router on the platform. Vrprovides a mechanism to segregate router trafficand maintenance activities based on a logical sep-aration of ports into separate VirtualRouters. At anytime the number of VirtualRouter components exist-ing in the current view plus the number of newlycreated VirtualRouter components in the edit view

782


must be less than the maximum allowed number ofvirtual routers. This is regardless of how many Vir-tualRouter components may have been deleted inthe edit view. Any VirtualRouter which, when cre-ated in the edit view, results in a total count greaterthan the maximum allowed, is labelled as invalidand must be deleted. It is recommended that thedeletion of any VirtualRouter components existingin the current view should be activated using theActivate Prov command before creating any newVirtualRouter components. DESCRIPTION

Class NA

Presence required

Visibility customer

Unit

Range [1..16]


Initial Value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }

783



Initial value 0

managementAccess

Parameter name managementAccess

Domain

Description This attributes specifies the routing capabilities ofthis Virtual Router (VR) and controls the TCP ac-cess into that VR. External access is only permittedthrough the VR that has this attribute enabled. Theattribute allows the following subcomponents to beprovisioned: Ipx, Bridging, Sna, Sres, and Snmp.Exactly one VR must have this attribute set to en-abled. The first provisioned VR has its manage-mentAccess attribute set to enabled by default. ThemanagementAccess attribute of subsequent VRs isset to disabled.

Class NA

Presence required

Visibility customer



Initial value N.A.

snmpAdminStatus


Domain

Description This sets the desired state of this Virtual Router(VR). The up state indicates the VR is operational.The down state indicates the VR is not operational.The down state is only valid when the manage-mentAccess attribute is disabled. The testing stateis invalid for a VR.

Class NA

Presence required

Visibility customer



Initial value up

784


virtualPrivateNetworkIdentifier

Parameter name virtualPrivateNetworkIdentifier

Domain

Description This attribute specifies the Virtual Private Network(VPN) associated with this Virtual Router. This is aglobally unique identifier composed of a three-octetlong Organizationally Unique Identifier (OUI) fol-lowed by a four-octet long VPN index. The value"00-00-00-00-00-00-00" identifies an unspecifiedvpnId and should be set to other non-zero valueswhen the autoDiscovery attribute under same virtu-al router vr/x ip tunnel msep/y is enabled.

Class NA

Presence required

Visibility customer

Range [7..7]

Data type DashedHexString

Initial value 00-00-00-00-00-00-00

virtualRouterProcessor

Parameter name virtualRouterProcessor

Domain

Description This attribute specifies the LogicalProcessor onwhich this VirtualRouter resides. The ManagementVirtual Router must reside on Lp/0. The followingcard types may support a Virtual Router: CP CPeDCPeE VpnXc WARNING: When changing this at-tribute the operationalState of the LogicalProcessororiginally associated with this VirtualRouter must beenabled when the provisioning is activated. This isrequired for the IP control path to be updated cor-rectly on all IP media logical processors. If the ori-ginal LogicalProcessor is not enabled when the pro-visioning is activated then the IP control path for allIP medias linked to this VirtualRouter will be dis-abled. The only method to recover the IP controlpath is to reset the LogicalProcessor for each of theassociated IP medias.

Class NA

Presence required

Visibility customer

Range Lp, Dlep

785


Data type HwLink

Initial value N.A.

vpnMode

Parameter name vpnMode

Domain

Description This attribute specifies if the virtual router behavesas a carrier Virtual Router or a customer VirtualRouter. The value should be set to carrier only ifthis Virtual Router is part of the backbone networkproviding Virtual Private Network services. VirtualRouters used as a Virtual Connection Gateway(VCG) should have this value set to carrier.

Class NA

Presence required

Visibility customer

Range customer, carrier


Initial value customer

786


211 casProvisioningSystem (Prov)





Parents:

EM - Prov

Child(ren):

-

Identifiers:

-

Links:


Parameters:

autoConfirm

Parameter name autoConfirm

Domain

Description This attribute specifies whether the auto-confirmation functionality is turned on or off. Whenthe attribute is turned on, the operator need not is-sue a Confirm Prov command following an activa-tion. When the attribute is turned off, any activationshould be confirmed through the Confirm Prov com-mand. With this attribute turned on, if an activationinadvertently impacts management connectivity tothe shelf, then the shelf would remain isolated frommanagement perspective. Hence,it is strongly re-commended to have serial port access to the switchfor troubleshooting and recovery.

Class NA

Presence required

787


Visibility customer

Range off, on


Initial value off

checksum

Parameter name checksum

Domain

Description This attribute specifies whether the checksum func-tionality is turned on or off. When the attribute isturned on, the checksum functionality will be in-voked for the commands Save Prov, Activate Prov,Commit Prov, Load Prov, Apply Prov and reloadCP.When the attribute is turned off, the checksum func-tionality will not be invoked for the commands SaveProv, Activate Prov, Commit Prov, Load Prov, ApplyProv and reloadCP.

Class NA

Presence required

Visibility customer

Range off, on


Initial value off

maxNumberJournalFiles

Parameter name maxNumberJournalFiles

Domain

Description This attribute specifies the maximum number ofjournal files that can be saved. A value of none spe-cifies that journaling is disabled, while any othervalue specifies that journaling is enabled. The ShelfcpEquipmentProtection attribute must be set to coldwhen the maxNumberJournalFiles attribute is set tonone. The value of the maxNumberJournalFiles at-tribute must be greater than the value of the ProvcurrentJournal operational attribute. If it is not, theresulting impact is that journal log file saving be-comes operationally disabled. A critical alarm withindex 7000 0037 is also raised against the Provcomponent. A Commit Prov command would needto be entered to re-enable journaling. The operatormay want to set the maxNumberJournalFiles attrib-

788


ute to be less than the default value of 2000 in or-der to force a Commit Prov command to be enteredmore frequently. If a switch reset to the committedview occurs, the Restore Prov command may takeless time to complete in this case, since there arefewer journal log files to load and activate.

Class NA

Presence required

Visibility customer

Range { [100..2000],none }


Initial value 2000

789


212 casRoot (EM)





Parents:

-

Child(ren):

Aal2If - AAServ - ARtg - AtmIf - AtmMpe - Col - Dlep - IpIf - Iub - IuBc - Iucs - IuPc - IuPs - Iur - La -Laps - LocalMedia - Lp - LpG - Mod - NS - Prov - RncIn - Shelf - Smlc - Ss7 - Sw - Time - Vm - Vr -

Identifiers:


MaxIn-stances

rdnId relative primary 1 1

Links:


Parameters:

rdnId


Domain

Description Em/string This component represents the localnode. An instance of the EM component class (withthe local node name as its instance string) is auto-matically created as the root of the component hier-archy; that is, all of the top level components are itssubcomponents. The local node name is provi-sioned as the nodeName attribute of the Mod-uleData component. An operator need not enter theEM component at the start of a component name;the local node is assumed by default. However, to

790


specify some other node, it must be entered. Simil-arly, on output, the local node name is suppressed.

Class NA

Presence required

Visibility customer

Unit

Range NA


Initial Value

mdmCmGroup

Parameter name mdmCmGroup

Domain

Description This attribute specifies the name of the Configura-tion Management Group of the provisioned pass-port. This info is only dedicated to mdm module forit's own configuration

Class NA

Presence optional

Visibility customer

Range [0..40]


Initial value N.A.

mdmFmGroup

Parameter name mdmFmGroup

Domain

Description This attribute specifies the name of the Fault Man-agement Group of the provisioned passport. Thisinfo is only dedicated to mdm module for it's ownconfiguration

Class NA

Presence required

Visibility customer

Range [0..40]


Initial value FMGROUP

791


ppOamIpAddress

Parameter name ppOamIpAddress

Domain

Description This attribute specifies the IPv4 address of thepassport to be connected with, this info is providedto mdm module.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

792


213 wRncAAl2EndPoint (Aal2EndPoint)






Parents:

EM - RncIn - Qaal2P - Aal2EndPoint

Child(ren):

Route -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description DestA2EA This component represents the a destin-ation A2EA and contains the routes which can beused to reach this A2EA.

Class NA

Presence required

Visibility customer

Unit

Range [1..16383]

793


Data Type Decimal

Initial Value

address

Parameter name address

Domain

Description This attribute specifies the A2EA address as a 40hexadecimal digit E.191 address. This attribute sup-ports the concept of an address prefix, where thefirst several digits of the address may be entered.The prefix length is determined by the number of di-gits entered. In the case where address prefixes areused, the RNC will match A2EAs received inRANAP, RNSAP and NBAP messages to the bestprefix.

Class NA

Presence required

Visibility customer

Range [1..40]

Data type HexString

Initial value N.A.

794


214 wRncDestinationSignalingPoint (DestSP)






Parents:

EM - Ss7 - M3ua - DestSP

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


linkToPeerM3uaEnt Ss7 M3ua PME

Parameters:

rdnId


Domain

Description Ss7 M3ua/1 DestSP/n This component representsthe destination signaling point that has the peerM3UA user.

Class NA

Presence required

Visibility customer

Unit

795


Range [0..63]

Data Type Decimal

Initial Value

destPointCode


Domain

Description This attribute specifies the Destination Point Code(DPC) of the signaling destination on which thepeer M3UA user resides. The point code format fol-lows the definition of origPointCode.

Class NA

Presence required

Visibility customer

Range { [0..4294967295], }


Initial value N.A.

linkToPeerM3uaEnt

Parameter name linkToPeerM3uaEnt

Domain

Description This attribute specifies a link to the PeerM3uaEntitycomponent that describes the route to the signalingdestination specified by the parent DestinationSig-nalingPoint component.

Class NA

Presence required

Visibility customer

Range Ss7 M3ua PME


Initial value N.A.

networkIndicator


Domain

Description This attribute specifies whether the network is a na-tional network, or an international network.. The at-

796


tribute determines the value that is filled in the Net-work Indicator field of the messages sent to the re-mote end. This attribute must match what the re-mote end expects in the message.

Class NA

Presence required

Visibility customer




protocolVariant


Domain

Description This attribute specifies the SS7 protocol variant. Itdetermines whether the Point Codes for the node isITU or ANSI.

Class NA

Presence required

Visibility customer

Range itu, ansi


Initial value itu

797


215 wRncEdch25902 (Edch)






Parents:

EM - RncIn - Cm - Edch

Child(ren):

-

Identifiers:

-

Links:


Parameters:

congDelayThreshold

Parameter name congDelayThreshold

Domain

Description This attribute specifies the time for EDCH conges-tion delay expressed in milliseconds before sendinga TNL congestion notification to the NodeB.

Class NA

Presence required

Visibility customer

Range [0..5000]

Data type Decimal

Initial value 0

798


congestionControlPeriod

Parameter name congestionControlPeriod

Domain

Description This atttribute specifies the interval between UL IubFP Congestion Indication frames sent to theNodeB. Congestion by frame loss or delay will bedetermined during this period. The attribute valuemust be set in increments of 10 milliseconds.

Class NA

Presence required

Visibility customer

Range { [10..2550],none }


Initial value 200

deCongDelayThreshold

Parameter name deCongDelayThreshold

Domain

Description This parameter defines the EDCH congestion delaybefore clearing a congestion state by sending aTNL notification for no congestion to the NodeB.

Class NA

Presence required

Visibility customer

Range [0..5000]

Data type Decimal

Initial value 0

deSequencingWaitTimer

Parameter name deSequencingWaitTimer

Domain

Description This parameter specifies a delay before declaringframe loss.

Class NA

Presence required

Visibility customer

Range [0..100]

799


Data type Decimal

Initial value 10

nFramesBeforeEdchCongestion

Parameter name nFramesBeforeEdchCongestion

Domain

Description This attribute specifies the number of consecutiveEDCH frames to be lost before sending a TNL con-gestion notification for frame loss to the NodeB.

Class NA

Presence required

Visibility customer

Range [0..255]

Data type Decimal

Initial value 1

nFramesBeforeEdchDeCongestion

Parameter name nFramesBeforeEdchDeCongestion

Domain

Description This attribute specifies the number of consecutiveEDCH frames to be received before clearing a con-gestion state by sending a TNL congestion notifica-tion for no frame loss.

Class NA

Presence required

Visibility customer

Range [1..255]

Data type Decimal

Initial value 10

800


216 wRncHsdpa25902 (Hsdpa)






Parents:

EM - RncIn - Cm - Hsdpa

Child(ren):

-

Identifiers:

-

Links:


Parameters:

congDRTAllowed

Parameter name congDRTAllowed

Domain

Description This attribute controls the inclusion by the SRNC ofthe HSDPA User Plane congestion field DRT in HS-DSCH Data frames sent over Iub to allow the detec-tion of the HSDPA congestion by the NodeB. If notallowed, the optional DRT field is not included in theHS-DSCH Data frames sent over Iub. If allowed,the DRT field is included to the HS-DSCH Dataframe sent over Iub. The optional DRT field is neverincluded in the HS-DSCH Data frames sent overIur. The notification of the congestion due to delaybuild up by the NodeB to the CRNC is controlled byprovisioning at the NodeB. The inclusion of the DRTfield increases each HS-DSCH Data frame size by

801


16 bits. When the HSDPA congestion detection bythe NodeB is disabled, the CRNC may use a localHSDPA congestion detection.

Class NA

Presence required

Visibility customer




congFSNAllowed

Parameter name congFSNAllowed

Domain

Description This attribute controls the inclusion by the SRNC ofthe HSDPA User Plane congestion field FSN in HS-DSCH Data frames sent over Iub to allow the detec-tion of the HSDPA congestion by the NodeB. If notallowed, the FSN field value is always zero in theHS-DSCH Data frames sent over Iub. If allowed,the FSN field value can range between 0..15 in theHS-DSCH Data frame sent over Iub. The FSN fieldvalue is always zero in the HS-DSCH Data framessent over Iur. The notification of the congestion dueto frame loss by the NodeB to the CRNC is con-trolled by provisioning at the NodeB. When the HS-DPA congestion detection by the NodeB is dis-abled, the CRNC may use a local HSDPA conges-tion detection.

Class NA

Presence required

Visibility customer




802


217 wRncInterfaceNode (RncIn)





Parents:

EM - RncIn

Child(ren):

Cm - Qaal2P - Tm -

Identifiers:

-

Links:


Parameters:

enhancedQualityOfService

Parameter name enhancedQualityOfService

Domain

Description This attribute activates enhanced QoS features. Ifset to "disabled", the pre UA6.0 congestion man-agement (i.e. HSDPA as best effort traffic) is avail-able. When set to "enabled", the following featuresare available: - HSDPA/R99 transport fairsharing, -real time rate control based on GBR for streamingand minBR for interactive and background trafficclasses, - real time bandwidth reservation

Class NA

Presence required

Visibility customer



803



hardwareCapability

Parameter name hardwareCapability

Domain

Description This attribute specifies the Hardware Capability ofthe RNC. A value of all6mPktServSP indicates thatall the packet server cards are 6mPktServSP. Avalue of allPktServSP2 indicates that all the packetserver cards are 6mPktServSP2. A value of allPkt-ServSP2FullDim indicates that all the packet servercards are 6mPktServSP2 and RNC is provisionedto run full dimensions for the number of NodeBsand Cells.

Class NA

Presence required

Visibility customer

Range all6mPktServSP, allPktServSP2, allPkt-ServSP2FullDim


Initial value all6mPktServSP

oamOmcIpAddresses

Parameter name oamOmcIpAddresses

Domain

Description This attribute specifies a list of possible OMC Ip ad-dresses used by a RNC to establish communicationlink. The maximum number of OMC IP addressesallowed is 20. This is used only for integrated rnc.At any given time only one of the possible OMC IPaddresses from the list is used to connect to RNC.

Class NA

Presence optional

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

oamPrimaryOmuIpAddress

804


Parameter name oamPrimaryOmuIpAddress

Domain

Description This attribute specifies the Ip address of the primaryOmu, used by the OMC. The OMC uses this ad-dress to establish communication link with ActiveOMU. If the value of this attribute is changed, theActive and Standby OMU APs must be reset afterthe Activate Prov command has completed. This isused only for integrated RNC.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

oamSecondaryOmuIpAddress

Parameter name oamSecondaryOmuIpAddress

Domain

Description This attribute specifies the Ip Address of the Sec-ondary Omu, used by the OMC. The OMC uses thisoamSecondaryOmuIpAddress to establish commu-nication link with Standby OMU. If the value of thisattribute is changed, the Active and Standby OMUAPs must be reset after the Activate Prov commandhas completed. This is used only for integratedRNC.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

rncInfo

Parameter name rncInfo

Domain

Description This is an arbitrary string is used to specify systeminformation about the RNC.

805


Class NA

Presence required

Visibility customer

Range [0..127]


Initial value

806


218 wRncIpFlow (IpFlow)






Parents:

EM - IpIf - BwPool - IpFlow

EM - Aal2If - BwPool - IpFlow

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description IpIf/n BwPool/n IpFlow/n This component is usedwhen the IUB interface employs IP. This componentdescribes uplink and downlink bandwidth for a spe-cified quality of service.

Class NA

Presence required

Visibility customer

807


Unit

Range [1..4]

Data Type Decimal

Initial Value

downlinkCommittedRate

Parameter name downlinkCommittedRate

Domain

Description This attribute specifies the down link committedrate. It is used together with downlinkPeakRate todetermine estimated down link bit rate for the Ip-Flow. Care should be taken when lowering thevalue of this attribute. If the value is set below thecurrent actual allocated bit rate used by all users onthis IpFlow, this could lead to Iub congestion andtrigger Congestion Management mechanisms onthis interface.

Class NA

Presence required

Visibility customer

Range [0..1000000]

Data type Decimal


downlinkPeakRate

Parameter name downlinkPeakRate

Domain

Description This attribute specifies the down link peak rate. It isused together with downlinkCommittedRate to de-termine estimated down link bit rate for the IpFlow.Care should be taken when lowering the value ofthis attribute. If the value is set below the currentactual allocated bit rate used by all users on this Ip-Flow, this could lead to Iub congestion and triggerCongestion Management mechanisms on this inter-face.

Class NA

Presence required

Visibility customer

Range [0..1000000]

808


Data type Decimal


qos

Parameter name qos

Domain

Description This attribute specifies quality of service. QoS mustbe unique across the BwPool (i.e. at most one Ip-Flow with qos=0, at most one with qos=1, at mostone with qos=2 and at most one with qos=3).

Class NA

Presence required

Visibility customer

Range [0..3]

Data type Decimal

Initial value 0

uplinkCommittedRate

Parameter name uplinkCommittedRate

Domain

Description This attribute specifies the up link committed rate. Itis used together with uplinkPeakRate to determineestimated up link bit rate for the IpFlow. Careshould be taken when lowering the value of this at-tribute. If the value is set below the current actualallocated bit rate used by all users on this IpFlow,this could lead to Iub congestion and trigger Con-gestion Management mechanisms on this interface.

Class NA

Presence required

Visibility customer

Range [0..1000000]

Data type Decimal


uplinkPeakRate

Parameter name uplinkPeakRate

Domain

809


Description This attribute specifies the up link peak rate. It isused together with uplinkCommittedRate to determ-ine estimated up link bit rate for the IpFlow. Careshould be taken when lowering the value of this at-tribute. If the value is set below the current actualallocated bit rate used by all users on this IpFlow,this could lead to Iub congestion and trigger Con-gestion Management mechanisms on this interface.

Class NA

Presence required

Visibility customer

Range [0..1000000]

Data type Decimal


810


219 wRncIpIf (IpIf)






Parents:

EM - IpIf

Child(ren):

BwPool -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description IpInterface/n This component represents an IPbased transport interface of a UTRAN Interface.The IpInterface must have one or more BwPoolsubcomponents provisioned to describe transportcharacteristics of the physical IP connection.

Class NA

Presence required

Visibility customer

811


Unit

Range [1..16383]

Data Type Decimal

Initial Value

cacMethod

Parameter name cacMethod

Domain

Description This attribute specifies the type of call admissioncontrol to be performed on this interface.The typesdefined are as follows: - none: Call admission con-trol is disabled. - ipif: Call admission control is per-formed on the sum of the bandwidth of all IpFlowsprovisioned under the same instance of BwPool onthis IpIf instance. - qos: Call admission control isperformed at the IpIf level on all IpFlow with thesame qos level provisioned in the same BwPool un-der this IpIf. Qos CAC enforces minimum bandwidthreservation on IpFlows which share the same qual-ity of service. - flow: Call admission control is per-formed on the one instance of IpFlow in the sameBwPool under this IpIf.

Class NA

Presence required

Visibility customer

Range none, ipif, qos, flow


Initial value ipif

commentText


Domain


Class NA

Presence required

Visibility customer

Range [0..60]


812


Initial value

customerIdentifier


Domain


Class NA

Presence required

Visibility customer

Range { [1..8191],0 }


Initial value 0

ipUmtsInterfaceList

Parameter name ipUmtsInterfaceList

Domain

Description This attribute contains the list of links, each link rep-resenting an Iub interface component attached tothis IpIf.

Class NA

Presence required

Visibility customer

Range Iub IuUplane IpLk


Initial value N.A.

813


814


220 wRncM3uaConnection (M3uaConn)






Parents:

EM - Ss7 - Sccp - M3uaConn

Child(ren):

-

Identifiers:

-

Links:


linkToServiceIndicator Ss7 M3ua ServInd

Parameters:

linkToServiceIndicator

Parameter name linkToServiceIndicator

Domain

Description This attribute specifies a link to an Ss7 M3ua/1 Ser-viceIndicator/n component for M3UA services.

Class NA

Presence required

Visibility customer

Range Ss7 M3ua ServInd


Initial value N.A.

815


816


221 wRncM3uaServiceIndicator (ServInd)






Parents:

EM - Ss7 - M3ua - ServInd

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


linkToM3uaConnection • Ss7 Sccp M3uaConn

•

Parameters:

rdnId


Domain

Description Ss7 M3ua/1 ServiceIndicator/<service indicator>This component represents an M3UA service indic-ator. A service indicator is a logical identifier thatrepresents a particular user of M3UA services. TheSS7 specifications define which users are requiredto use a given service indicator. Only one applica-tion can use a particular M3UA service indicator.On RNC SCCP is the only user of M3UA. For

817


SCCP use, the M3uaServiceIndicator componentinstance must be 3.

Class NA

Presence required

Visibility customer

Unit

Range [3..3]

Data Type Decimal

Initial Value

linkToM3uaConnection

Parameter name linkToM3uaConnection

Domain

Description This attribute specifies a link to the application us-ing the service represented by this service indicator.On RNC SCCP is the only user of M3UA. This at-tribute must be linked to an Ss7 Sccp/1M3uaConnection component.

Class NA

Presence required

Visibility customer

Range Ss7 Sccp M3uaConn, Ss7 Sccp Mtp3Conn


Initial value N.A.

818


222 wRncMtp3UserAdaptation (M3ua)






Parents:

EM - Ss7 - M3ua

Child(ren):

DestSP - PME - PMP - ServInd -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 M3UA/1 This component represents the Mtp3User Adaptation layer of the SS7 stack.

Class NA

Presence required

Visibility customer

Unit

Range [1..1]

819


Data Type Decimal

Initial Value

ackTimer

Parameter name ackTimer

Domain

Description This attribute specifies the T(ack) timer interval. Ifthe M3UA layer does not receive an ACK responsefor an ASP Up, ASP Down, ASP Active or ASP In-active message within this interval, it will resend thetimed-out message.

Class NA

Presence required

Visibility customer

Range [1..60]

Data type Decimal

Initial value 2

heartBeatTimer

Parameter name heartBeatTimer

Domain

Description This attribute specifies the T(beat) timer interval.Either M3UA peer may optionally send Heartbeatmessages periodically subject to T(beat) timer inter-val. Upon receiving a Heartbeat message, theM3UA peer MUST respond with a Heartbeat Ackmessage no matter the M3UA heartbeat procedureis enabled or not. If no Heartbeat Ack message ( orany other M3UA message ) is received within2*T(beat), the remote M3UA peer is considered un-available.

Class NA

Presence required

Visibility customer



Initial value 30

origPointCode

820


Parameter name origPointCode

Domain

Description This attribute specifies the point code of the nodethat the M3UA layer manages. The point codeformats are the same as those of Mtp3. This attrib-ute must not specify a point code identical to thatspecified by destPointCode or adjPointCode.

Class NA

Presence required

Visibility customer

Range { [0..4294967295], }


Initial value N.A.

recoveryTimer

Parameter name recoveryTimer

Domain

Description This attribute specifies the amount of time to bufferoutgoing messages when the last remaining activeASP in the AS becomes inaccessible. If this timerexpires before the ASP returns to service, the mes-sages are dropped and the AS transitions into thedown state. A value of 0 indicates that bufferingshould not occur, and the AS should immediatelytransition into the down state when the last remain-ing active ASP becomes inaccessible. Note thathigher value for this attribute will require morememory to be reserved for message buffering.

Class NA

Presence required

Visibility customer

Range [0..5]

Data type Decimal

Initial value 2

seqCtrlTimer

Parameter name seqCtrlTimer

Domain

Description This attribute specifies the amount of time for whichM3UA will queue the diverted traffic. This occurs

821


during controlled rerouting procedure to avoid mes-sage missequencing.

Class NA

Presence required

Visibility customer

Range [500..1200]

Data type Decimal

Initial value 800

822


223 wRncPeerM3uaEntity (PME)






Parents:

EM - Ss7 - M3ua - PME

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 M3ua/1 PeerM3uaEnt/n This component rep-resents the peer M3UA signaling entity that caneither be an intermediate hop (e.g. a SignalingGateway (SG) node ) to the eventual destination orthe destination itself.

Class NA

Presence required

Visibility customer

823


Unit

Range [0..63]

Data Type Decimal

Initial Value

linkToPeerM3uaProcs

Parameter name linkToPeerM3uaProcs

Domain

Description This attribute specifies a list of peer M3ua pro-cesses that serve this peer M3ua entity.

Class NA

Presence required

Visibility customer

Range Ss7 M3ua PMP


Initial value N.A.

minActivePmps

Parameter name minActivePmps

Domain

Description This attribute specifies the minimum number of act-ive peer signalling processes that are required tohandle traffic within the peer M3ua entity. In the"n+k" redundancy model, this is the number "n".Number "k" is the number of peer signalling pro-cesses that are either active if the redundancyModeis loadshare or inactive until needed due to a failedpeer signalling process if the redundancyMode isoverride. If the redundancyMode is override, ac-cording to RFC 4666 section 4.3.2, when the re-dundancyMode is voerride, this attribute must beset to 1 meaning only 1+k redundancy mode is sup-ported.

Class NA

Presence required

Visibility customer

Range [1..8]

Data type Decimal

Initial value 1

824


redundancyMode

Parameter name redundancyMode

Domain

Description This attribute specifies the redundancy mode of theM3ua peer entity. The mode could be either load-share or override (active/ standby).

Class NA

Presence required

Visibility customer

Range loadshare, override


Initial value loadshare

825


224 wRncPeerM3uaProcess (PMP)






Parents:

EM - Ss7 - M3ua - PMP

Child(ren):

Assoc -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 M3ua/1 PeerM3uaProc/n This component rep-resents a peer M3ua signalling process. It caneither be an Signalling Gateway Process (SGP) oran IP Server Process (IPSP).

Class NA

Presence required

Visibility customer

Unit

826


Range [0..511]

Data Type Decimal

Initial Value

peerIpAddress

Parameter name peerIpAddress

Domain

Description This attribute specifies a list of IP addresses of theendpoint in the peer M3UA signalling process. Thefirst IP address in the list is the primary IP addressand must be provisioned. This IP address is used tosend the SCTP INIT chunk when establishing theSCTP association. The rest IP address(es) in thelist are provisioned when the endpoint is multi-homed. They are used to validate the list of IP ad-dresses sent by the peer in the INIT-ACK chunk. Ifmismatch occurs, the SCTP association will beaborted.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

peerSctpPort

Parameter name peerSctpPort

Domain

Description This attribute specifies the SCTP port number of theendpoint in the peer M3UA signalling process. ThisSCTP port number is passed to SCTP layer tosetup the association.

Class NA

Presence required

Visibility customer

Range [1..65535]

Data type Decimal

Initial value 2905

827


peerType

Parameter name peerType

Domain

Description This attribute specifies the type of the M3UA peerprocess. The type could be either IP Server Pro-cess (IPSP) for IP Point-to-Point connectivity or Sig-naling Gateway Process (SGP) for AS-SG con-nectivity.

Class NA

Presence required

Visibility customer

Range ipsp, sgp


Initial value ipsp

pmpLinkToPmes

Parameter name pmpLinkToPmes

Domain

Description This attribute specifies a list of peer M3ua entitiesthat this peer M3ua process serves.

Class NA

Presence required

Visibility customer

Range PME


Initial value N.A.

828


225 wRncQAAL2Parms (Qaal2P)





Parents:

EM - RncIn - Qaal2P

Child(ren):

Aal2EndPoint -

Identifiers:

-

Links:


Parameters:

originatingA2ea

Parameter name originatingA2ea

Domain

Description This attribute specifies the A2EA of the RNC.

Class NA

Presence required

Visibility customer

Range [40..40]

Data type HexString

Initial value N.A.

resetRetries

Parameter name resetRetries

829


Domain

Description Number of reset retries before reset procedure isterminated in case of peer not responding. Numberof 0 means infinite resets

Class NA

Presence required

Visibility customer



Initial value 3

timerBlo

Parameter name timerBlo

Domain

Description This attribute specifies value of the timerBlo definedin Q.2630.1.

Class NA

Presence required

Visibility customer

Range [2..60]

Data type Decimal

Initial value 5

timerErq

Parameter name timerErq

Domain

Description This attribute specifies value of the timerErq definedin Q.2630.1.

Class NA

Presence required

Visibility customer

Range [5..30]

Data type Decimal

Initial value 5

timerMod

830


Parameter name timerMod

Domain

Description This attribute specifies value of the timerModdefined in Q.2630.2.

Class NA

Presence required

Visibility customer

Range [2..60]

Data type Decimal

Initial value 2

timerRel

Parameter name timerRel

Domain

Description This attribute specifies value of the timerRel definedin Q.2630.1.

Class NA

Presence required

Visibility customer

Range [2..60]

Data type Decimal

Initial value 2

timerRes

Parameter name timerRes

Domain

Description This attribute specifies value of the timerResdefined in Q.2630.1.

Class NA

Presence required

Visibility customer

Range [2..60]

Data type Decimal

Initial value 10

timerUbl

831


Parameter name timerUbl

Domain

Description This attribute specifies value of the timerUbl definedin Q.2630.1.

Class NA

Presence required

Visibility customer

Range [2..60]

Data type Decimal

Initial value 5

832


226 wRncQAAL2Route (Route)






Parents:

EM - RncIn - Qaal2P - Aal2EndPoint - Route

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


linkToAal2If Aal2If

Parameters:

rdnId


Domain

Description QAAL2Route This component represents a routewhich can be used to reach an A2EA destination

Class NA

Presence required

Visibility customer

Unit

833


Range [1..16]

Data Type Decimal

Initial Value

cost

Parameter name cost

Domain

Description This attribute specifies the cost of QAAL2Route.Routes with lower costs are chosen in preferenceover routes with higher costs.

Class NA

Presence required

Visibility customer

Range [0..5]

Data type Decimal

Initial value 3

linkToAal2If

Parameter name linkToAal2If

Domain

Description This attribute specifies the link to one aal2If.

Class NA

Presence required

Visibility customer

Range Aal2If


Initial value N.A.

834


227 wRncSctpAssociation (Assoc)






Parents:

EM - Ss7 - M3ua - PMP - Assoc

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 M3ua/1 PMP/n Assoc/n This component rep-resents an SCTP association between two end-points (source vs. peer) as defined in RFC2960.

Class NA

Presence required

Visibility customer

Unit

Range [0..7]

835


Data Type Decimal

Initial Value

ackDelay

Parameter name ackDelay

Domain

Description This attribute specifies the delayed acknowledge-ment (SACK) timer interval for an SCTP associ-ation. This controls the maximum delay betweenthe arrival of a DATA chunk and the transmission ofa SCTP Selective Acknowledgement (SACK)chunk.

Class NA

Presence required

Visibility customer

Range [50..500]

Data type Decimal

Initial value 200

heartBeatInterval

Parameter name heartBeatInterval

Domain

Description An SCTP endpoint monitors the reachability of theidle destination transport address of its peer bysending a heartbeat chunk every heartbeatIntervalto the destination transport address defined for theassociation.

Class NA

Presence required

Visibility customer

Range [1500..60000]

Data type Decimal

Initial value 3000

maxInitRetransmission

Parameter name maxInitRetransmission

Domain

836


Description This attribute specifies the maximum number of re-transmissions of an INIT or COOKIE ECHO packetduring the establishment of an SCTP associationafter the retransmission timer expires.

Class NA

Presence required

Visibility customer

Range [1..32]

Data type Decimal

Initial value 8

maxPathRtx

Parameter name maxPathRtx

Domain

Description This attribute specifies the maximum number of re-transmission attempts for the path in an associationbefore declare the destination address is unreach-able.

Class NA

Presence required

Visibility customer

Range [1..8]

Data type Decimal

Initial value 3

pathMtu

Parameter name pathMtu

Domain

Description This attribute specifies the path Maximum Trans-mission Unit (MTU) size to be used for the SCTPassociation between the RNC and the peer. Thevalue of this attribute includes the IP header size(20 bytes for IPv4).

Class NA

Presence required

Visibility customer

Range [512..9180]

Data type Decimal

837


Initial value 1500

retransmissionTimeOutInitial

Parameter name retransmissionTimeOutInitial

Domain

Description This attribute specifies the initial timeout value forthe retransmission timer (RTO). This value is useduntil a Round Trip timer (RTT) measurement hasbeen made for the destination transport address.The provisioned value must be between rtoMin andrtoMax.

Class NA

Presence required

Visibility customer

Range [1000..30000]

Data type Decimal

Initial value 3000

retransmissionTimeOutMax

Parameter name retransmissionTimeOutMax

Domain

Description This attribute specifies the maximum permissibletimeout value for the retransmission timer (RTO). Ifthe computed RTO value is greater than rtoMax,the RTO value is set to the value of rtoMax.

Class NA

Presence required

Visibility customer

Range [1000..60000]

Data type Decimal

Initial value 10000

retransmissionTimeOutMin

Parameter name retransmissionTimeOutMin

Domain

Description This attribute specifies the minimum permissibletimeout value for the retransmission timer (RTO). Ifthe computed RTO value is less than rtoMin, the

838


RTO value is set to the value of rtoMin.

Class NA

Presence required

Visibility customer

Range [100..5000]

Data type Decimal

Initial value 500

839


228 wRncSourceEndPoint (SrcEp)






Parents:

EM - Ss7 - Sctp - SrcEp

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description Ss7 Sctp/n SrcEp/n This component represents thelocal SCTP endpoint. Each SCTP endpoint is rep-resented by a list of IP addresses and an SCTPport number.

Class NA

Presence required

Visibility customer

Unit

840


Range [1..1]

Data Type Decimal

Initial Value

diffServCodePoint

Parameter name diffServCodePoint

Domain

Description This attribute is the differentiation of service codepoint of an IP transport bearer. This qualifies thequality of service according to RFC 2474.

Class NA

Presence required

Visibility customer

Range default, efX101110, cs7X111000, cs6X110000,cs5X101000, cs4X100000, cs3X011000,cs2X010000, cs1X001000, af11X001010,af12X001100, af13X001110, af21X010010,af22X010100, af23X010110, af31X011010,af32X011100, af33X011110, af41X100010,af42X100100, af43X100110


Initial value af41X100010

linkToSctpAssociations

Parameter name linkToSctpAssociations

Domain

Description This attribute specifies a list of link to the SctpAsso-ciation component. This endpoint is the source end-point of the SCTP association.

Class NA

Presence required

Visibility customer

Range Ss7 M3ua PMP Assoc


Initial value N.A.

sctpPort

Parameter name sctpPort

841


Domain

Description This attribute specifies the SCTP port number of thesource SCTP endpoint.

Class NA

Presence required

Visibility customer

Range [1..65535]

Data type Decimal

Initial value 2905

sourceIpAddress

Parameter name sourceIpAddress

Domain

Description This attribute specifies a list of IP addresses of thesource SCTP endpoint. The first IP address in thelist is the primary IP address and must be provi-sioned. The rest IP address(es) in the list are provi-sioned when the source endpoint is multi-homed.Local multi-homing is not supported; therefore onlyone IP address can be provisioned.

Class NA

Presence required

Visibility customer

Range [0..255].[0..255].[0..255].[0..255]


Initial value N.A.

842


229 wRncStreamControlTxProtocol (Sctp)






Parents:

EM - Ss7 - Sctp

Child(ren):

SrcEp -

Identifiers:


MaxIn-stances


Links:


linkToLogicalProcessor • Lp

•

Parameters:

rdnId


Domain

Description Ss7 Sctp/n This component represents the StreamControl Transmission Protocol (SCTP) layer thatruns on top of Internet Protocol (IP) layer. Toprovide redundancy multiple SCTP instancesshould be provisioned on different Packet Servercards.

Class NA

843


Presence required

Visibility customer

Unit

Range [0..15]

Data Type Decimal

Initial Value

linkToLogicalProcessor

Parameter name linkToLogicalProcessor

Domain

Description This attribute specifies a link to a Lp/n component.It indicates the Packet Server card on which theSCTP instance resides. Only one SCTP may resideon a Packet Server card.

Class NA

Presence required

Visibility customer

Range Lp, Dlep


Initial value N.A.

844


230 wRncTransportMap (Tm)






Parents:

EM - RncIn - Tm

Child(ren):

Tse -

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description RncIn TransportMap/n This component is requiredfor user plane allocation. User plane allocationparameters are mapped to a required transport ser-vice for IP and ATM respectively. This allows expli-cit support of QOS for each user plane resource al-location.

Class NA

Presence required

Visibility customer

845


Unit

Range [1..64]

Data Type Decimal

Initial Value

commentText


Domain

Description This attribute specifies an arbitrary string whoseuse is left discretion of the system administrator. Itis not used by the system.

Class NA

Presence required

Visibility customer

Range [0..60]


Initial value

interfaceType

Parameter name interfaceType

Domain

Description This attribute specifies the UTRAN interfaces towhich this TransportMap applies. - bit 0 - IuCs. - bit1- Iur. - bit 2- Iub

Class NA

Presence required

Visibility customer

Range iucs, iur, iub

Data type Set of

Initial value

preference

Parameter name preference

Domain

Description This attribute is used to describe preference of aTransportMap as either primaryForTrafficTypeswhen only one unique combination of (trafficClass,

846


rbSetQoS) is provisioned in the TransportMap, orsharedForAllTrafficTypes where multiple combina-tions of (trafficClass, rbSetQoS) are allowed inTransportMap.

Class NA

Presence required

Visibility customer

Range primaryForTrafficTypes, sharedForAllTrafficTypes


Initial value sharedForAllTrafficTypes

847


231 wRncTransportServiceEntry (Tse)






Parents:

EM - RncIn - Tm - Tse

Child(ren):

-

Identifiers:


MaxIn-stances


Links:


Parameters:

rdnId


Domain

Description RncIn TransportMap/n TransportServiceEntry/mThis component represents one row in the Trans-portMap table. Each row of the TransportMap tablecontains attributes for the User plane allocationparameters that are mapped to required transportservice parameters for IP and ATM respectively.Transport Service parameters are used as an inputto the Call Admission Control algorithm.

Class NA

848


Presence required

Visibility customer

Unit

Range [1..64]

Data Type Decimal

Initial Value

arpLevel

Parameter name arpLevel

Domain

Description This attribute specifies Allocation/Retention PriorityLevel as defined in 3GPP TS25.413. The lowest pri-ority is level0 and the highest priority level is level2.If value ignore is employed than this parameter isnot used in the transport service selection.

Class NA

Presence required

Visibility customer

Range ignore, level0, level1, level2


Initial value ignore

diffServCodePoint

Parameter name diffServCodePoint

Domain

Description This attribute is the differentiated services codepoint of an IP transport bearer as defined in RFC2474. This transport service parameter is used tomark IPv4 TOS in the IP header of each IP packet.The attribute is not used for ATM transport bearers.

Class NA

Presence required

Visibility customer

Range default, efX101110, cs7X111000, cs6X110000,cs5X101000, cs4X100000, cs3X011000,cs2X010000, cs1X001000, af11X001010,af12X001100, af13X001110, af21X010010,af22X010100, af23X010110, af31X011010,af32X011100, af33X011110, af41X100010,

849


af42X100100, af43X100110


Initial value default

qos

Parameter name qos

Domain

Description This attribute specifies the quality of service valuefor the Aal2If Path, Aal2IF BwPool Path, or IpIf Bw-Pool IpFlow. The RncIn CongestionManagementconfigured for the BwPool has attributes bw-PoolQosDiscardThreshold and bwPoolQosBack-PressureThreshold which relate and apply to theqos as defined by this attribute. The Aal2If BwPoolor IpIf BwPool components has qosNBwReserva-tion which also relates to the same qos as definedby this attribute.

Class NA

Presence required

Visibility customer

Range [0..3]

Data type Decimal

Initial value 0

rbSetQos

Parameter name rbSetQos

Domain

Description This attribute specifies value for the Qualify of Ser-vice as configured in the RBSetConf Managed Ob-ject in the Cnode MIB.

Class NA

Presence required

Visibility customer

Range [0..3]

Data type Decimal

Initial value 0

trafficClass

850


Parameter name trafficClass

Domain

Description This attribute specifies traffic class of a transportbearer. The traffic class values are extended valuesfrom those defined in 3GPP TS25.413 - conver-staional - as defined in TS25.413 - streaming - asdefined in TS25.413 - interactive - as defined inTS25.413 - background - as defined in TS25.413 -signalling - this value is used to define transportmap for Signaling Radio Bearers - common - thisvalue is used to define transport map for CommonTransport Channels Radio Bearers - ignore - whenthe trafficClass attribute value is set to "ignore", thetrafficClass attribute is not used during the transportservice selection.

Class NA

Presence required

Visibility customer

Range ignore, conversational, streaming, interactive, back-ground, signalling, common



trafficHandlingPriority

Parameter name trafficHandlingPriority

Domain

Description This attribute specifies Traffic Handling Priority asdefined in 3GPP TS25.413. This attribute is usedonly when the trafficClass attribute has value inter-active. For all other values of trafficClass, this attrib-ute is not used. The highest priority is denoted bythp0, whereas thp2 denotes the lowest priority. Ifthe value ignore is employed, then this parameter isnot used in the transport service selection.

Class NA

Presence required

Visibility customer

Range ignore, thp0, thp1, thp2



851


uplinkDownlinkPreference

Parameter name uplinkDownlinkPreference

Domain

Description This attribute specifies the preference of the relatedTransportMap for the specific Traffic Type de-scribed with the combination (trafficClass, rb-SetQos, arpPl, thp). The preference should be setfor the Traffic Types that have predominantly onetransport direction (uplink or downlink), for exampleHSUPA vs. HSDPA. For the Traffic Types that havesymetric transport characteristics in both uplink anddownlink direction, this attribute shall be ignored.

Class NA

Presence required

Visibility customer

Range noPreference, preferredForUl, preferredForDl, pre-ferredForUlAndDl


Initial value noPreference

852


232 Index of Customer Parameters

•Standard

—AtmRouting

– discardCallsOnOverload

– useBestMatchAddrOnCrankback

—wRncAAl2EndPoint

– address

—Aal2If

– cacMethod

– cidSelectMethod

– commentText

– congestionManagement

– customerIdentifier

– ecrOverBook

– loadBalancingMethod

– qos0BwReservation

– qos0toQ2630QosCodepoint







– transportMap

– umtsInterfaceList

—Aal2Link

– linkToAal2If

—InwAtmConnection

– atmConnection

– commentText

853


– ipCos

– linkToIpLogicalInterface

– mplsSignaling

—InwOspfAreaAggregateEntry

– effect

—Aal2IfAlcapConn

– destPointCode

– networkIndicator

—InwOspfAreaEntry

– areaSummary

– authType

– importAsExtern

—InwArp

– autoRefresh

– autoRefreshTimeout

– retryTimes

—wRncSctpAssociation

– ackDelay

– heartBeatInterval

– maxInitRetransmission

– maxPathRtx

– pathMtu

– retransmissionTimeOutInitial

– retransmissionTimeOutMax

– retransmissionTimeOutMin

—AtmInterface

– ctdCalculation


– endToEndLoopback

– faultHoldOffTime

– interfaceName

854


– maxVpiBits

– oamSegmentBoundary

– remoteAtmInterfaceLabel

– rxCellDiscardThreshold

– rxFrameDiscardThreshold

– segLinkSideLoopback

– segSwitchSideLoopback

– txCellDiscardThreshold

– txCellMemory

– txFrameDiscardThreshold

—InwAtmMpe

– bridgePortLink


– encapType

– ifAdminStatus

– linkToProtocolPort

– maxTransmissionUnit

– rxPacketWiseDiscard

– txPacketWiseDiscard

—InwIpBootpRelayAgent

– hopDiscardThreshold

– snmpAdminStatus

—InwIpBootpPort

– bootpLogicalInterface

– relayAddress

– relayForwardStatus

– snmpAdminStatus

—BwPool

– congestionManagement

– mobileCountryCode

– mobileNetworkCode


855





– transportMap

—AtmConnectionAdministrator

– bandwidthPool

– maxAutoSelectedVciForNonZeroVpi

– maxAutoSelectedVciForVpiZero

– maxAutoSelectedVpi

– maxVccs

– maxVpcs

– maxVpts

– minAutoSelectedVciForNonZeroVpi

– minAutoSelectedVciForVpiZero

– minAutoSelectedVpi

– minMulticastBranches

– permittedAtmServiceCategories

—AtmVptCa

– bandwidthPool

– maxVccs

– permittedAtmServiceCategories

—AtmPnniCache

– agingPeriod

– maxNumEntries

– maxPathsToIntermediateNode

– purgeEntryAtPathInvalid

—Card

– cardType

– commentText

– configuredProductCode

– sparingConnection

—

856


IuBcSignallingBearerCbsCbcIp

– cbcIp

—AtmConstantBitRate

– cdv

– cdvt

– cellLossRatio

– emissionPriority

– forceTagging

– holdingPriority

– maxCtd

– minPerVcQueueLimit

– perVcQueueLimitReferenceRate

– pool



– shapeRecoupPolicy

– svcMpHoldingPriority

– trafficShaping



– txQueueLimit

– unshapedTransmitQueueing

– usageParameterControl

– weightPolicy

—AtmVptConstantBitRate

– cdv

– cdvt

– cellLossRatio

– maxCtd

– pool

—IuBcSignallingBearerCbs

– niIp

857


– retryTimer

—AtmCell

– alarmActDelay

– clearDelay

– correctSingleBitHeaderErrors

– hecErrorIntervalLimit

– hecErrorLimit

– hecSampleInterval

– lcdStateDelay

– scrambleCellPayload

—AtmConfiguredNode

– avcrMt

– avcrPm

– cdvPm

– ctdPm

– helloHoldDown

– helloInactivityFactor

– helloInterval

– horizontalLinkInactivityTime

– nodeId

– peerDelayedAckInterval

– peerGroupId

– ptseHoldDown

– ptseLifetimeFactor

– ptseRefreshInterval

– requestRxmtInterval

– restrictTransit

– svccCalledIntegrityTime

– svccCallingIntegrityTime

– svccEstablishIntegrityTime

– svccInitTime

– svccRetryTime

—

858


CongestionManagement

– activation

– bwPoolCellColor

– bwPoolQosBackPressureThreshold

– bwPoolQosDiscardThreshold

– commentText

—DcsCollector

– collectionTimes

—AtmDstPvcConfig

– aisGeneration

– bandwidthElastic

—wRncDestinationSignalingPoint

– destPointCode

– linkToPeerM3uaEnt


– protocolVariant

—DualLpEquipmentProtection


– mainLp

– spareLp

—InwVrDifferentiatedServicesDomain

– phbGeneralSource

– phbRoutingSource

—EDS1

– lineType

– ssmRxDefault

—EE1

– crc4Mode

– rxSynchClk

– ssmE1SaNumber

859


– ssmRxDefault

—InwEgressCosTreatment


– setTosByte

– tos

– tosMask

—wRncEdch25902

– congDelayThreshold

– congestionControlPeriod

– deCongDelayThreshold

– deSequencingWaitTimer

– nFramesBeforeEdchCongestion

– nFramesBeforeEdchDeCongestion

—AtmIfEmissionPriority

– minimumBandwidthGuarantee

—GrmEmissionPriority

– minimumBandwidthGuarantee

– redMode

– txQueueSize

—EsiToRegister

– uniScope

—Ethernet

– applicationFramerName

– autoNegotiation

– commentText


– duplexMode

– ifAdminStatus

– includeAdminInfoInAlarm

– lineSpeed

– losDuringMigration

860


– maxFrameSize

– statisticsSpooling

– vendor

—InwOspfExport

– advertiseStatus

– bgpAsId

– bgpPeerIp

– description

– egpAsId

– extLsaMetricType

– metric

– protocol

– ripInterface

– ripNeighbor

– tag

—InwRipExport

– advertiseStatus

– bgpAsId

– description

– egpAsId

– exportMetric

– ospfTag

– outInterface

– protocol

– ripInterface

—PmsLanFramer

– interfaceName

—InwHostEntryCos

– encap

– maxTxUnit

– permanentVirtualCircuitNumber

– physAddress

861


– tunnelDestinationAddress

—InwOspfHostEntry

– areaId

– metric

—wRncHsdpa25902

– congDRTAllowed

– congFSNAllowed

—InwIngressCosTreatment

– discardPriority

—InwLocalMediaInterface



– maxTransmissionUnit

– trafficType

—Interface


– ifAdminStatus


– mode

—AtmIlmi

– operatingMode

– prefixToRegister

– vci

—InwRipImport

– description

– importMetric

– interface

– neighbor

– usageFlag

—InwIp

862


– accountCollection

– cacheTableSize

– cosPolicyAssignment

– defaultTtl

– ecmpMode

– forwarding

– lcmCacheMissTrace

– preConfigFwdPath

– snmpAdminStatus

– sourceRoute

—wRncIpFlow

– downlinkCommittedRate

– downlinkPeakRate

– qos

– uplinkCommittedRate

– uplinkPeakRate

—wRncIpIf

– cacMethod

– commentText


– ipUmtsInterfaceList

—IpLink

– linkToIpIf

—InwIpPort

– allowMcastMacDest

– arpNoLearn

– arpStatus

– cosPolicyAssignment

– directedBroadcast

– encap

– icmpMaskReply

– ipCos

863


– lanModel

– linkModel

– maxTxUnit

– mcastDomain

– multicastStatus

– proxyArpStatus

– relayAddress

– relayBroadcast

– sendRedirect

– snmpAdminStatus

– sourceRouteEndStationSupport

—IuPsIf

– commentText

– gtpEchoEnabled

– gtpEchoReqAttempts

– gtpEchoReqInterval

– gtpEchoRspTime

—IubIf

– commentText

– oamTrafficInterface

– serviceGroupId

—IucsIf

– commentText

—IurIf

– commentText

—InwLanApplication

– bridgePortLink

– correlationTag


– ifAdminStatus


864



—LineAutomaticProtectionSwitching


– holdOffTime

– mimicAps

– mode

– primarySectionMismatchTime

– protectionLine

– protocol

– revertive

– sendLineAisDuringMigration

– signalDegradeRatio

– waitToRestorePeriod

– workingLine

—AtmPnniLoadBalancing

– maxPaths

– method

– minVariance

– slopeVariance

—PsSs7Link

– linkToSaalNni

—PsSs7LocalSubsystem

– subsystemNumber

—InwIpLogicalIf

– broadcastAddress

– linkDestinationAddress

– linkToMediaConnection

– linkToMulticastStaticGroup

– linkToPimSmCandidateBsr

– linkToPimSmCandidateRp

– netMask

865


—LogicalProcessor


– logicalProcessorType

– mainCard

– oneForNSparingBehavior

– spareCard

—PcsLpgLogicalProcessor

– migrationBehaviour

—ScsLogicalProcessorType

– commentText

– featureList

– systemConfig

—PsSs7Linkset

– adjPointCode

– linkOscillationProbationTimer

– linkOscillationSuspensionTimer

– localInhibitTestTimer


– protocolVariant

– remoteInhibitTestTimer

—AtmLinkTxUtilization

– criticalTxUtilAlarmThreshold

—wRncMtp3UserAdaptation

– ackTimer

– heartBeatTimer

– origPointCode

– recoveryTimer

– seqCtrlTimer

—wRncM3uaConnection

– linkToServiceIndicator

866


—InwIpMulticast

– borderRouterCapability

– cacheTableSize

– snmpAdminStatus

—InwMemoryManagement

– vrMaxHeapSpace

—ModuleData

– namsId

– nodeId

– nodeName

– nodePrefix

– regionId

—PsSs7MessageTransferPartLayer3

– ansiOrigPointCode

– changebackDiversionDelayTimer

– changeoverAckTimer

– changeoverHoldoffTimer

– firstAttemptChangebackAckTImer

– forceUninhibitTimer

– inhibitAckTimer

– initialAlignmentDelayTimer

– ituOrigPointCode

– mtpType

– reroutingHoldOffTimer

– routeSetTestRepeatTimer

– secondAttemptChangebackAckTimer

– sltAckTimer

– sltIntervalTimer

– uninhibitAckTimer

—PsSs7Mtp3Connection

– linkToServiceIndicator

867


—AtmNailedUpAccounting

– accountClass


– accountConnectionType

– serviceExchange

—NetworkSynchronization

– primaryReference

– reversionDelay

– secondaryReference

– setsPrimaryReference

– setsSSMProtocol

– setsSecondaryReference

– setsSquelchTimer

– setsTertiaryReference

– ssmProtocol

– termPanel

– tertiaryReference

– useableReferences

—Aal2IfNailedupAccessPoint

– atmConnection

—NailedupAccessPoint

– atmConnection

—PsSs7NailedupAdaptationPoint

– atmConnection

—InwOspfIfNeighbor

– priority

—InwRipExportNetworkList

– ipAddress

– ipMask

—InwRipImportNetworkList

868


– ipAddress

– ipMask

—InwOspfExportNetworkList

– ipAddress

– ipMask

—InwIpRouteNextHop

– metric

—AtmPnniNodeName

– nodeId

—RspLpNpu

– serviceBundleName

—AtmNailedUpRelayPoint


– nextHop

– oamSegmentBoundary

– overrideHoldingPriority

—AtmNonRealTimeVariableBitRate

– cdvt

– cellLossRatio


– forceTagging

– holdingPriority



– pool





– trafficShaping


869



– txQueueLimit



– weightPolicy

—AtmVptNonRealTimeVariableBitRate

– cellLossRatio

– pool

—PmsLanOamEthernet


– commentText


– duplexMode

– extendedStatistics

– ifAdminStatus


– lineSpeed

– switchoverHoldoff

– switchoverOnFailure

– vendor

—ApmOm

– type

– typeCheck

—InwIpOspf

– alarmGeneration

– asBdrRtrStatus

– attachAsTag

– defaultOspfExt1RtePreference

– defaultOspfExt2RtePreference

– defaultOspfIntRtePreference

– ecmpStatus

– estimatedNumberOfAreas

870


– estimatedNumberOfExternalOSPFRoutes

– estimatedNumberOfInterfacesPerArea

– estimatedNumberOfInternalOSPFRoutes

– estimatedNumberOfNeighborsPerInterface

– generateDefaultRouteMetric

– migrateRip

– multicastForward

– opaqueCapability

– redistributeIbgp

– routerId

– snmpAdminStatus

– spareInstance

– spfHoldTime

– tosSupport

—InwOspfIf

– areaId

– authType

– helloInterval

– ifType

– multicastForwarding

– pointToMultiPointMode

– pollInterval

– retransInterval

– rtrDeadInterval

– rtrPriority

– snmpAdminStatus

– transitDelay

—AtmConnectionMappingOverride

– firstNonZeroVpiForVccs

– numNonZeroVpisForVccs

– numVccsForVpiZero

– numVccsPerNonZeroVpi

—

871


DcsLpEngAalOverride

– maxListSize

—ArcApcOverride

– bufferLimitPerEP

– connectionPoolCapacity

– highPriorityEpdOffset

– lowPriorityEpdOffset

– portCongestionPolicy

—ArcOverride

– connectionPoolCapacity

– multicastBranchesCapacity

– protectedConnectionPoolCapacity

– protectedMcastBranchesCapacity

– rxCellMemoryAllocation

– txCellMemoryAllocation

—DcsLpEngDSOverride

– agentQueueSize

—FcrcOverride

– lnnConnectionPoolCapacity

– subConnectionPoolCapacity

—FcrcPqcOverride

– extendedQueueInfra

– ipRoutesPoolCapacity

—wRncPeerM3uaEntity

– linkToPeerM3uaProcs

– minActivePmps

– redundancyMode

—wRncPeerM3uaProcess

– peerIpAddress

– peerSctpPort

872


– peerType

– pmpLinkToPmes

—IuxIfPath

– pathOwner

– qos

—InwPolGrp

– linkToPolicyUsers

—AtmPnniPeerGroupLeader

– initTime

– leadershipPriority

– overrideDelay

– reElectionInterval

—InwVrDiffServPhb

– dropPrecedence

– trafficClass

—InwIpPmm

– ipAddress

– linkToVspPkiClient

—AtmPnni

– avcrMt

– avcrPm

– cdvPm

– ctdPm

– defaultScope

– domain

– helloHoldDown


– helloInterval

– horizontalLinkInactivityTime

– maxAlternateRoutesOnCrankback

– nodeAddressPrefix

873


– optimizationMetric

– outgoingNcciIeFormat

– overrideDelay

– pathDiversity

– peerDelayedAckInterval

– pglInitTime

– ptseHoldDown

– ptseLifetimeFactor

– ptseRefreshInterval

– reElectionInterval

– requestRxmtInterval

– svccCalledIntegrityTime

– svccCallingIntegrityTime

– svccEstablishIntegrityTime

– svccInitTime

– svccRetryTime

– uniToPnniScopeMap

—AtmPnniInterface

– accountClass



– avcrMt

– avcrPm

– cbrWeight

– nrtVbrWeight

– rtVbrWeight

– serviceExchange

– softPvpAndPvcHoldOffTime

– softPvpAndPvcRetryPeriod

– traceDestination

– ubrWeight

—AtmAddressPnniInfo

– reachability

874


– scope

—EthernetPolicy

– egressTagRule

– unknownVlanIdTreatment

– vlanAware

—InwPol

– assignedCos

—ProtocolPort

– linkToMedia

– snmpAdminStatus

—casProvisioningSystem

– autoConfirm

– checksum

– maxNumberJournalFiles

—wRncQAAL2Parms

– originatingA2ea

– resetRetries

– timerBlo

– timerErq

– timerMod

– timerRel

– timerRes

– timerUbl

—AtmRcc

– aggregationToken

– helloHoldDown


– helloInterval

– vci

—PsSs7RemoteSubsystem

875


– pointCodeList

– subsystemNumber

—PsSs7RouteInfo

– linkToRoute

—InwIpRip

– defaultRipRtePreference

– generateDiscardRoute

– migrateRip

– redistributeIbgp

– rfc1058MetricUsage

– snmpAdminStatus

—InwIpRipIf

– acceptDefault

– defaultRouteMetric

– flashUpdateFlag

– ifConfReceive

– ifConfSend

– metric

– networkRouteStatus

– poisonReverseFlag

– snmpAdminStatus

—wRncInterfaceNode

– enhancedQualityOfService

– hardwareCapability

– oamOmcIpAddresses

– oamPrimaryOmuIpAddress

– oamSecondaryOmuIpAddress

– rncInfo

—PsSs7Route

– linkToLinkset

– priority

876


—wRncQAAL2Route

– cost

– linkToAal2If

—InwStaticRouteEntry

– outInterfaces

—InwIpStaticRouteEntry

– heartbeat

– protected

– protectedFailureBehavior

– staticRemoteRtePreference

—PsSs7Routeset

– destPointCode


– protocolVariant

—AtmRealTimeVariableBitRate

– cdv

– cdvt

– cellLossRatio


– forceTagging

– holdingPriority

– maxCtd



– pool





– trafficShaping


877



– txQueueLimit



– weightPolicy

—AtmVptRealTimeVariableBitRate

– cdv

– cellLossRatio

– maxCtd

– pool

—AtmSummaryAddress

– suppress

—PsSs7SaalNni

– alignmentAcceptTimer

– ccTimer

– idleTimer

– keepAliveTimer

– linkReEstablishTimer

– linkToLinkInLinkset

– maxCc

– maxPdusBetweenPolls

– noResponseTimer

– pollTimer

– provingMode

—PsSs7SignallingConnControlPart

– classOfService

– maxConnections

– timerConnEst

– timerInactivityReceive

– timerInactivitySend

– timerRel

– timerRepeatRel

878


—wRncStreamControlTxProtocol

– linkToLogicalProcessor

—Sdh

– clockingSource

– commentText


– expectedRxSectionTrace

– ifAdminStatus


– lineAutomaticProtectionSwitch

– s1RxDefault

– s1RxOverride

– s1TxOverride

– txSectionTrace

– vendor

—wRncM3uaServiceIndicator

– linkToM3uaConnection

—PsSs7ServiceIndicator

– linkToMtp3Connection

—NtsServer

– ipAddress

– ipStack

– stratumLimit

—Shelf

– commentText

– cpEquipmentProtection

– repeatFanAlarm

—AtmSignalling

– addressConversion

– operatingMode

879


– vci

—Ismlc

– gpsNavDataTimer

– primaryIsmlcIp

– secondaryIsmlcIp

– srsLinkRetryTimer

– srsStartupTimer

—Sonet

– clockingSource

– commentText


– expectedRxSectionTrace

– ifAdminStatus


– lineAutomaticProtectionSwitch

– s1RxDefault

– s1RxOverride

– s1TxOverride

– txSectionTrace

– vendor

—DcsSpooler

– maximumNumberOfFiles

– spooling

—AtmSrcPvc

– adminControl

– aisGeneration


– calledAddress

– calledVpiVci

– callingAddress

—wRncSourceEndPoint

880


– diffServCodePoint

– linkToSctpAssociations

– sctpPort

– sourceIpAddress

—InwSrcPvc

– calledVpiVci

– remoteAddress

– remoteConnectionIdentifier

—Aal2IfSrcPvc

– calledAddress

– calledVpiVci

– remotePathIdentifier

—IubIfSrcPvc

– calledAddress

– calledVpiVci

—PsSs7SrcPvc

– calledAddress

– calledVpiVci

– remoteSaalNniIdentifier

—IsmlcSatelliteReferenceSystem

– port

– srsIp

—InwIpStatic

– defaultStaticDiscardRtePreference

– defaultStaticRemoteRtePreference

– heartbeatDeadInterval

– maxEcmpNextHops

—Aal2IfSpvcTerminationPoint

– linkToDlep

– softPvcRetryPeriod

881


—InwSpvcTerminationPoint

– localAddress

– softPvcHoldOffTime


—IubIfSpvcTerminationPoint


—PsSs7SpvcTerminationPoint


—ApmSts


– concatNumber


– expectedRxPathTrace

– ifAdminStatus

– txPathTrace

—InwOspfStubAreaEntry

– advertiseDefault

– metric

– metricType

—ScsSoftware

– checksum

—InwOspfIfTypeOfService

– tosMetric

—IuPcSignallingBearerTal

– niIp

– rxHeartbeatInterval

– txHeartbeatInterval

—IuPcSignallingBearerTalTalIp

– ipPortNumber

882


– preferenceNumber

– sasIp

—InwVrDiffServTc

– schedulingClass4Queues

– schedulingClass8Queues

—AtmConTest


– customizedPattern

– duration

– frmPatternType

– frmSize

– frmTypes

– overrideHoldingPriority

—NtsTime

– timeDifferenceLimit

—AtmTrafficManagementProv

– abrConnectionType

– atmServiceCategory

– bearerClassBbc

– bestEffort

– bwdQosClass

– bwdQosParameters

– clippingBbc

– forceTagging

– fwdQosClass

– fwdQosParameters

– holdingPriority

– rxPacketWiseDiscard

– rxTrafficDescParm

– rxTrafficDescType

– trafficShaping

– transferCapabilityBbc

883


– txPacketWiseDiscard

– txQueueLimit

– txTrafficDescParm

– txTrafficDescType

– txWredMode

– txWredThreshold



– weight

—InwTrafficManagement


– peakCellRate

—Aal2IfTrafficManagement






—IubIfTrafficManagement






—GrmTrafficManager


—wRncTransportMap

– commentText

– interfaceType

– preference

—PsSaalNniTrafficManagement

884







—InwTosMap

– tos

—wRncTransportServiceEntry

– arpLevel

– diffServCodePoint

– qos

– rbSetQos

– trafficClass

– trafficHandlingPriority

– uplinkDownlinkPreference

—AtmUnspecifiedBitRate

– cdvt


– forceTagging

– holdingPriority

– maxVccs

– maxVpcs

– maxVpts


– minimumCellRate


– pool





– trafficShaping

885




– txQueueLimit



– weightPolicy

—AtmVptUnspecifiedBitRate

– maxVccs

– minimumCellRate

– pool

—AtmUni

– accountClass



– interfaceType

– loopPrevention

– serviceExchange

– side

– softPvpAndPvcHoldOffTime

– softPvpAndPvcRetryPeriod

– version

—AtmUniAddressUniInfo

– pnniReachability

– scope

—ApmVc4


– concatNumber


– expectedRxPathTrace

– ifAdminStatus

– pathTraceLength

– txPathTrace

886


—AtmControlChannelVcd


– qosClass

– trafficDescParm

– trafficDescType

– trafficShaping



– weight

—AtmVirtualChannelDescriptor

– correlationTag


– mCastConnectionType



—InwOspfVirtIfEntry

– authType

– helloInterval

– retransInterval

– rtrDeadInterval

– transitDelay

—EthernetVirtualLanIdentifier

– correlationTag

– ifAdminStatus



—AtmVirtualPathDescriptor

– correlationTag




887



—AtmVptVpd

– correlationTag





– vptType

—VirtualRouter


– managementAccess

– snmpAdminStatus

– virtualPrivateNetworkIdentifier

– virtualRouterProcessor

– vpnMode

•Inventory

•States and Status

•Dynamic Data

•Installation and Commisioning

888


233 Index of Manufacturer Parameters

•Standard

•Inventory

•States and Status

•Dynamic Data

•Installation and Commisioning

889


890


Wireless Service Provider SolutionsW-CDMAAlcatel-Lucent 9300 W-CDMA Product Family - Parameter Reference Guide - I-Node Parameters

Copyright © 2001-2008 Alcatel-Lucent, All Rights Reserved

ALCATEL-LUCENT CONFIDENTIAL

UNCONTROLLED COPY: The master of this document is stored on an electronic database and is "write protected"; it may be alteredonly by authorized persons. While copies may be printed, it is not recommended. Viewing of the master electronically ensures accessto the current issue. Any hardcopies taken must be regarded as uncontrolled copies.

ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property of Alcatel-Lucent. Except asexpressly authorized in writing by Alcatel-Lucent, the holder shall keep all information contained herein confidential, shall disclose theinformation only to its employees with a need to know, and shall protect the information from disclosure and dissemination to thirdparties. Except as expressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the information containedherein. If you have received this document in error, please notify the sender and destroy it immediately.

Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marks of Alcatel-Lucent, Alcateland Lucent Technologies.

All other trademarks are the property of their owners.

Document number: NN-20500-027Document issue: 09.05Document status: PreliminaryProduct Release: OAM06.0Date: September 2008

nn-20500-027p3 (parameters dictionary - inode parameters) 09.05 preliminary september 2008

Documents

alcatellucent alcatellucent

document issue

en preliminaryupdate

lucent technologies

service marksof alcatellucent

current issue

en standardupdate

en draftupdatecreation