nmso pricing and specification guide - the business linetbl.ca/pdfs/cataloge_government1.pdf ·...

1

Price Guide - CAN Prices effective May 2011NMSO Contract #E60PQ - 090004/10/PQ

NMSO Pricing and Specification Guide

Table of Contents

The Keystone System

Standard Worksurfaces

Curvilinear Returns Worksurfaces

Corner Worksurfaces

Accessories

Mobile Pedestals

Build Your Keyboard System Product Code

Mechanism Options

Keyboard Platform Options

Palm Support Options

Keyboard System Accessories

Ergonomic Accessories

Build Your Diffrient Technology Light Product Code

Build Your Diffrient Light Product Code

Build Your Element Light Product Code

Access Rail Component Pricing Chart

Access Rail Extras

M7 / M4 Common Configurations

M2 Common Configurations


Build Your Monitor Arm Product Code

M7 Component Pricing Chart

M4 Component Pricing Chart

M7 and M4 Accessories

Humanscale and the Environment

Humanscale Terms and Conditions

4

5

6 - 8

9 - 11

12

13 - 14

15

16

17

18

19

20 - 21

22 - 23

24 - 25

26 - 27

28 - 29

30

31 - 34

35

36 -37

38

39 - 41

42- 44

45

46

47 - 48

For the most updated information on

available Humanscale products, please

visit www.humanscale.com

3

Contract number

Discounting grid

4

The Keystone System

OVERVIEW

• Extensive range of sizes, including tops from 30” to 60” wide in various depths • Three height ranges • Incremental or Crank• Heavy-duty structural and mechanical components

CONSTRUCTION DETAILS

General • Tops are 1” thick, 45 lb density particleboard • Tops are pre-drilled for threaded metal inserts • Variety of TFL and HPL top finishes and painted base finishes available (see below) • Edges are either 5mm bull-nose T-mould (standard) or 3mm flat PVC edging (add -3mm after code) • All metal components have hybrid epoxy powder-coat finish

Standard High and Low Range Bases • Attractive, low-profile steel feet with rounded front edge, bolted to legs • Legs are heavy-duty 7.25”x 1.625” x 11 GA cold-rolled steel • Modesty panel is screwed to welded steel cross members • Crank tables can lift 250 lbs. evenly distributed • Incremental and Crank are available in two height ranges: • Low range Incremental/Crank: 24” to 32” • Low range, standard Electric: 24” to 36” • High range Incremental/Crank: 27” to 35” • High range, standard Electric: 27” to 43”

Finishes• Tops can be in any of our standard Thermally-Fused Laminates (TFL) or High Pressure Laminates (HPL) - see Systems Finish Card •Standard edging is a 5mm, slight bullnose,T-moulding. Flat, 3mm PVC with radius edges is also available, by specifying on purchase order. •All solid and woodgrain TFL finishes come with matching edging as standard. •All solid and woodgrain HPL finishes come with matching edging except for Ginger Root Maple. •User can choose a non-matching edging from Keystone Systems Finish Card •Custom HP Laminates can be used for a nominal up-charge. Call a Humanscale sales rep for additional information •Bases are most commonly painted Black, but are also available to match following finishes from Keystone Systems Finish Card: Folkstone Grey; Silver Grey; Ingot Grey; Charcoal; Haze,and Calamare. •Actual top dimensions are True Dimensions as listed. Panel Wrap tops are available at same price if required. Panel Wrap tops are 1” smaller than true sizes for dimensions A, B but C dimensions remain unchanged as shown.

If Panel Wrap is required, please specify a “PW” at the end of the model code.

5

WS 3024 IH

WS 3624 IH

WS 4224 IHWS 4824 IH

WS 6024 IH

WS 3030 IHWS 3630 IHWS 4230 IHWS 4830 IHWS 6030 IH

WS 3024 TC

WS 3624 TC

WS 4224 TCWS 4824 TC

WS 6024 TC

WS 3030 TCWS 3630 TCWS 4230 TCWS 4830 TCWS 6030 TC

30

36

42

48

60

30

36

42

48

60

30

36

42

48

60

30

36

42

48

60

24

24

24

24

24

30

30

30

30

30

24

24

24

24

24

30

30

30

30

30

24

24

24

24

24

30

30

30

30

30

24

24

24

24

24

30

30

30

30

30

80

91

103

109

132

92

102

110

120

135

85

96

108

114

137

97

107

115

125

133

2.5

3.0

3.5

4.0

5.0

3.0

3.5

4.5

5.0

6.0

2.5

3.0

3.5

4.0

5.0

3.0

3.5

4.5

5.0

5.5

923

953

983

1014

1099

997

1026

1056

1086

1172

1225

1256

1287

1498

1583

1298

1328

1359

1571

1614

1005

1040

1074

1109

1228

1088

1122

1156

1191

1311

1308

1342

1375

1593

1712

1390

1423

1458

1675

1735

• Tops include cable grommets • 1 Grommet for surfaces under 48”, 2 Grommets for surfaces 48” and over. •All tables 46” and over have width wise support bar. Support bar can be attached to rear of sleeve to accommodate under desk attachments.

Incremental Height Base • For Incremental Adjustable tables, thumb screws allow height adjustment range from 24” to 32” (L) or 27” to 35” (H) in 1 inch increments. Please specify on order.

Top Crank Base • Top Crank tables have right hand crank positioning as standard. Left hand available by special order, add $25 list per table. • Top Crank tables have a height adjustment range from 24”to 32”(L) or 27”to 35”(H). Please specify on order. • All tables come standard with radius corners and 5mm bullnose PVC edging. • Tables are also available with square corners and 3 mm flat PVC edging at no extra cost. For 3mm edge option, simply add “-3M”after any code.

24” DeeP

30” DeeP

24” DeeP

30” DeeP

Standard Worksurfaces

LEGEND:W=width; D=mid-depth; C=side-depth (inches); Wt=shipping weight (lbs); V=volume (cubic feet); TFL $=thermally fused laminate $; HPL $= high pressure laminate $

INCREMENTAL HEIGHT BASE

TOP CRANK HEIGHT BASE

MODEL #

SIN 711-2

SIN 711-2

Top Crank tables 48” w and over are gas spring assisted

W D C Wt V TFL $ HPL $ REMARKS

6


TOP CRANK BASE

SIN 711-2

• Tops include cable grommets • 1 Grommet for surfaces under 34”, 2 Grommets for surfaces 34” and over. • All tables 46” and over have width wise support bar. Support bar can be attached to rear of sleeve to accommodate under desk attachments.

Incremental Height Base • For Incremental Adjustable tables, thumb screws allow height adjustment range from 24” to 32” (L) or 27” to 35” (H) in 1 inch increments. Please specify on order.

Top Crank Base • Top Crank tables have right hand crank positioning as standard. Left hand available by special order, add $25 list per table. • Top Crank tables have a height adjustment range from 24” to 32” (L) or 27” to 35” (H). Please specify on order.

WS3030R24 TCWS3630R24 TCWS4230R24 TCWS4830R24 TC

WS3030L24 TCWS3630L24 TCWS4230L24 TCWS4830L24 TC

30

36

42

48

30

36

42

48

30

30

30

30

30

30

30

30

24

24

24

24

24

24

24

24

97

107

115

125

97

107

115

125

3.0

3.5

4.5

5.0

3.0

3.5

4.5

5.0

1346

1376

1407

1619

1346

1376

1407

1619

1439

1472

1506

1724

1439

1472

1506

1724

RIGHT

LeFT

RIGHT

LeFT

INCREMENTAL HEIGHT BASE

SIN 711-2

WS3030R24 IHWS3630R24 IHWS4230R24 IHWS4830R24 IH

WS3030L24 IHWS3630L24 IHWS4230L24 IHWS4830L24 IH

30

36

42

48

30

36

42

48

30

30

30

30

30

30

30

30

24

24

24

24

24

24

24

24

92

102

110

120

92

102

110

120

3.0

3.5

4.5

5.0

3.0

3.5

4.5

5.0

1045

1075

1104

1134

1045

1075

1104

1134

1136

1170

1205

1240

1136

1170

1205

1240

Curvilinear Returns Worksurfaces

MODEL # W D C Wt V TFL $ HPL $ REMARKS

7

WS3030R24 FHWS3630R24 FHWS4230R24 FHWS4830R24 FH

WS3030L24 FHWS3630L24 FHWS4230L24 FHWS4830L24 FH

30 x 30 x “

36 x 30 x “

42 x 30 x “

48 x 30 x “

30 x 30 x “

36 x 30 x “

42 x 30 x “

48 x 30 x “

87

97

105

115

87

97

105

115

3.0

3.5

4.5

5.0

3.0

3.5

4.5

5.0

754

784

814

845

754

784

814

845

870

880

914

950

870

880

914

950

• Tops include 1 Grommet for surfaces under 36”, 2 Grommets over 36”.• Fixed Height tables are 29” high.• All tables come standard with radius comers and 5 mm bullnse PVC edging.• Tables are also available with square corners and 3 mm flat PVC edging at no extra cost. For 3 mm edge option, simply add “-3M” after any code.

Curvilinear Returns - Fixed Height - Supplemental

CURVILINEAR RETURN - RIGHT

CURVILINEAR RETURN - LEFT

MODEL # DIMENSIONSW” x D” x H” Wt. V TFL$ HPL$ REMARKS

LEGEND:W=width; D=mid-depth; H=height; Wt=shipping weight (lbs); V=volume (cubic feet); TFL $=thermally fused laminate $; HPL $= high pressure laminate $

8

WSO3024 TCWSO3624 TCWSO4224 TC WSO4824 TC

WSO6024 TC

WSO3030 TCWSO3630TCWSO4230 TC WSO4830 TC

WSO6030 TC

WSO3030R24 TCWSO3630R24 TCWSO4230R24 TCWSO4830R24 TC

WSO3030L24 TCWSO3630L24 TCWSO4230L24 TCWSO4830L24 TC

30 x 24 x “

36 x 24 x “

42 x 24 x “

48 x 24 x “

60 x 24 x “

30 x 30 x”

36 x 30 x “

42 x 30 x “

48 x 30 x “

60 x 30 x “

30 x 30 x”

36 x 30 x “

42 x 30 x “

48 x 30 x “

30 x 30 x”

36 x 30 x “

42 x 30 x “

48 x 30 x “

85

96

108

114

137

97

107

115

125

140

97

107

115

125

97

107

115

125

2.5

3.0

3.5

4.0

5.0

3.0

3.5

4.5

5.0

6.0

3.0

3.5

4.5

5.0

3.0

3.5

4.5

5.0

1052

1070

1106

1136

1232

1120

1146

1175

1210

1296

1426

1456

1487

1699

1426

1456

1487

1699

1130

1150

1196

1232

1352

1210

1242

1275

1315

1435

1519

1552

1586

1804

1519

1552

1586

1804

• Tops include 1 Grommet for surfaces under 36”, 2 Grommets over 36”.• Rectangular No Modesty Top Crank Tables have right hand crank positioning as standard. Left hand availablee by special order, add $25 list per table.• Top Crank tables have a height adjustment range from 24” to 32” (L) or 27” to 35” (h). Please specify on order.

• Curved No Modesty Top Crank Tables have right hand crank positioning as standard. Left hand available by special order, add $25 list per table.• All the table come standard with radius corners and 5 mm bullnose PVC edging.• Tables are also available with square corners and 3 mm flat PVC edging at no extra cost. For 3 mm edge option, simply add “-3M” after any code.

RIGHT

LeFT

No Modesty Top Crank Adjustable Tables - Supplemental


RECTANGULAR - NO MODESTY

CURVED TOP - NO MODESTY


9

CSN 3624 ICSN 4224 I

CKN 3624 BI

CFN 3624 BICFN 4224 BI

36

42

36

36

42

24

24

24

24

24

18

25.5

18

18

25.5

102

112

118

127

137

7.0

9.0

7.0

7.0

9.0

1008

1111

1540

1910

2010

1209

1263

1701

2069

2164

• Fixed height tables are 29” high • All “CKN”units have single arm mechanisms - Mechanism adjusts 6” above worksurface - Tilts +15°/ -15° • All “CFN”units have double arm Full Flex mechanisms - Lift and lock mechanism adjusts 6” below and 6”above worksurface - Tilts +9°/ -15° • All trays match worksurface finish and thickness • For Incremental Adjustable tables, thumb screws allow height adjustment range from 24” to 32” (L) or 27” to 35” (H) in 1 inch increments. Please specify on order. •All tables come standard with radius corners and 5mm bullnose PVC edging. •Tables are also available with square corners and 3 mm flat PVC edging at no extra cost. For 3mm edge option, simply add “-3M”after any code.

SINGLe ARM

FULL FLeX KB

Corner Worksurfaces

INCREMENTAL HEIGHT— STRAIGHT CORNER

INCREMENTAL HEIGHT— CURVED WEDGE CORNER

SIN 711-2

SIN 711-2

A B C Wt V TFL $ HPL $ REMARKS

A

B

B

A

C

A

B

B

A

C

LEGEND:A=back; B=join; C=work area (inches); Wt=shipping weight (lbs); V=volume (cubic feet); TFL $=thermally fused laminate $; HPL $= high pressure laminate $

10

• Top C rank, V-Base tables have center crank positioning. • Top Crank, regular base tables have right hand crank positioning as standard. Left hand available by special order, add $25 list per table. • All “CVK”units have single arm mechanisms - Mechanism adjusts 6”below worksurface - Tilts + 15°/ -15° • All “CVF”units have double arm Full Flex mechanisms - Lift and lock mechanism adjusts 6” below and 6”above worksurface - Tilts +9°/ -15° • All trays match worksurface finish and thickness • Top Crank have a height adjustment range from 24” to 32” (L) or 27” to 35” (H). Please specify on order. • All tables come standard with radius corners and 5mm bullnose PVC edging. • Tables are also available with square corners and 3 mm flat PVC edging at no extra cost. For 3mm edge option, simply add “-3M”after any code.

FULL FLeX KB

Corner Worksurfaces

SIN 711-2

A B C Wt V TFL $ HPL $ REMARKS

CFN 4224 BT 42 24 138 9.0 2504 2700

TOP CRANK-REG. BASE —CURVED WEDGE CORNER

MODEL #

A

B

B

A

C

SIN 711-2

CVSN 3624 TCVSN 4224 T

CVKN 3624 BTCVKN 4224 BT

CVFN 3624 BTCVFN 4224 BT

36

42

36

42

36

42

24

24

24

24

24

24

18

25.5

18

25.5

18

25.5

106

116

122

132

131

141

7.0

9.0

7.0

9.0

7.0

9.0

1347

1420

1885

1958

2254

2330

1547

1640

2085

2178

2454

2550

SINGLe ARM

FULL FLeX KB

TOP CRANK-V BASE — STRAIGHT CORNER

TOP CRANK-V BASE — CURVED WEDGE CORNER

SIN 711-2

SIN 711-2

A

B

B

A

C

A

B

B

A

C

Top Crank Corners are gas spring assisted

LEGEND:A=back; B=join; C=work area (inches); Wt=shipping weight (lbs); V=volume (cubic feet); TFL $=thermally fused laminate $; HPL $= high pressure laminate $

CSN 4224 T 42 24 25.5

25.5

112 9.0 1575 1770

TOP CRANK-REG BASE— STRAIGHT CORNER

A

B

B

A

C

11

CVSON3624 T

CVSON4224 T

36” CORNeR

42” CORNeR

36 x 24 x “

42 x 24 x “

42 x 24 x “

106

116

141

7.0

9.0

9.0

890

980

1325

1090

1180

1525

• Tops include rear wire management notch• No Modesty Top Crank, V Base Corners have center crank positioning• All “ CVKH” units have single arm mechanisms

• Height adjustable: - 6” below and 6” above worksurface - Tilts +15° / -15°• All trays match worksurface finish and thickness• Top Crank V Base corners have a height adjustment range from 24” to 32” (L) or 27” to 35” (H). Please specify on order.• All tables come standard with radius corners and 5 mm bullnose PVC edging.• Tables are also available with square corners and 3mm flat PVC edging at no extra cost. For 3 mm edge option, simply add “-3M” after any code.

No Modesty Top Crank Adjustable Corners- Supplemental

Top Crank - V BaseStraight Corner (No Modesty)

Top Crank - V BaseCurved Wedge Corner (No Modesty)


42” CORNeR CVKHON4224BT


12

• Floating Modesty Panels provide privacy in both sitting and standing position of any height adjustable table. • Crank adjustable tables use 20” high floating modesty panels. • Panels are sheet metal and easily bolt into the back of the base frame. • Horizontal two part Wire Channels cannot be applied to the base modesty when a table is fitted with a floating modesty.

•GC 7000 provides top access to the power bar and Cable Trough for easier cable management. •Price includes factory installed.


GC 6000

GC 7000

3.15 dia x 1

3 6 1.0

80

80

CABLE GROMMET

MODEL # List $

REMARKS

FM 3020FM 3620FM 4220FM 4820FM 6020FM 7220

FM 3023FM 3623FM 4223FM 4823FM 6023FM 7223

24

30

36

42

54

66

24

30

36

42

54

66

.5

.5

.5

.5

.5

.5

.5

.5

.5

.5

.5

.5

20

20

20

20

20

20

23

23

23

23

23

23

5

7

7

9

11

12

6

8

8

10

12

13

1.3

1.5

1.8

2.0

2.5

3.0

1.3

1.5

1.8

2.0

2.5

3.0

99

113

129

143

173

200

140

157

176

193

216

248

Accessories

FLOATING MODESTY PANEL

MODEL #

SIN 711-2

SIN 711-2

W D C Wt V List $

Oversized grommet for top access to

power bar

13

• 30” deep unit fits under 30” deep bringing tops only• Drawers mounted on full extension, ball slides• Bottom drawer has a 5th caster to prevent tipping • Gang lock secures all drawers• Accepts letter and legal files• Top box drawers incluide 1 pencil tray

• Canspecifyupto3finishes (Contrast– drawerfaces,Base-body, Top-top) – drawer faces or top or both can be HP laminate.• HPL price includes HP on Tops (T) or Faces (C) (specify which). If both wanted in HP, add $78 list• Can be keyed alike, specify on order• Need to select handle style and finish• Gang lock secures all pedestal drawers • All drawers on full extension, ball bearing slides.• Includes hanging file suspension bars• Accepts legal and letter files.• Includes one pencil tray in top “Box” drawer.• Mobile peds have hidden 5th wheel behind bottom face to prevent tipping when bottom and top drawers open at the same time.• 3mm trim on all top and faces edges

• explanation of Standard Coding: S - Storage M - Mobile Pedestal H - Hanging Pedestal J - FloorPedestal F - Freestanding W - Box/File WS - Box / File / Seat X - Box/Box/File Y - File/File• Floor pedestal glides have over 1” leveling capacity

REMARKS

Mobile Pedestals

MODEL #

SIN 711-3

W D H WtWt

VV

List $HPL$

TFL $TFL $

LEGEND:W=width; D=mid-depth; H=height (inches); Wt=shipping weight (lbs); V=volume (cubic feet); TFL $=thermally fused laminate $; HPL $= high pressure laminate $

3 SMWT 18 (-)3 SMWT 24 (-)

3 SMXT 18 (-)3 SMXT 24 (-)

3 SMYT 18 (-)3 SMYT 24 (-)

16

16

16

16

16

16

18

24

18

24

18

24

22

22

27

27

27

27

56

65

5.0

7.0

5.0

7.0

4.0

5.0

5.0

7.0

5.0

7.5

543

590

641

688

641

688

621

668

719

766

719

766

BOX / FILe

BOX / BOX / FILe

FILe / FILe

MOBILE PEDESTALS

14

Choosing a Pedestal• 18”D Pedestals fit under 23” / 24”D tables.• 24”D Pedestals fit under 29” / 30”D tables except Electric which fit 18”D only.

NOTE: 18”D Mobiles will fit over foot, in front of leg on 29” / 30”D tables.

REMARKS

3 SFW 18 (-)3 SFW 24 (-)

3 SFX 18 (-)3 SFX 24 (-)

3 SFY 18 (-)3 SFY 24 (-)

16

16

16

16

16

16

18

24

18

24

18

24

28

28

28

28

28

28

56

65

68

81

67

80

4.0

5.0

5.0

7.0

5.0

7.0

543

590

641

688

641

688

621

668

719

766

719

766

Mobile Pedestals

FREESTANDING PEDESTALS

MODEL #

SIN 711-2

W D H Wt V HPL$TFL $

BOX / FILe

BOX / BOX / FILe

FILe / FILe

4 Handles to choose from:K1 Black, Tear DropK2 Black, WireN1 Nickel, Tear DropN2 Nickel, Wireenter Handle Section to Complete Code

15

Build Your Keyboard System Product Code

Choose from our many mechanisms, keyboard platforms,

mouse platforms, palm supports and track lengths to

configure your own customized keyboard system.

Mechanism

1

KeyboardPlatform

2

PalmSupport

4

Track (optional)

5

Keyboard System Product Code:

3

MousePlatform

5

1

2

4

3

16

5G $316 The world’s best-selling keyboard mechanism, the 5G combines easy dial-a-tilt and height adjustability with the strongest arm on the market.

6.25” height adjustment (1.25” above track to 5” below track)Comes standard with 21.625” track

4G $442 The 4G represents revolutionary keyboard technology with simple dial-a-tilt keyboard angle adjustability.

6.25” height adjustment (1.25” above track to 5” below track)Comes standard with 21.625” track

2G $283 The original standard bearer, the 2G offers independent height and tilt adjustment and unmatched stability.

6.25” height adjustment(1.25” above track to 5” below track)

Comes standard with 21.625” track

4GAD $391 The 4G Above Desk mechanism provides 4G functionality with a longer arm for use above the work surface.

11.5” height adjustment (8.5” above track to 3” below track)Comes standard with 27” track

Mechanism OptionsAll keyboard mechanisms offer 0 ̊ to –15˚ tilt for low-risk typing postures.Build-Your-Own configurations are available in Black only.

1

17

Comes with built-in mousing surface. Not available with other mouse platform options.

Keyboard Platform OptionsAll Build-Your-Own platforms are available in Black only.

550 Big Compact $174

10.625"

27"

500 Big $174

11.5"

27.5"

400 Diagonal Big $174

25"

10.625"



2

18

Palm Support OptionsAll Build-Your-Own palm supports are available in Black only.

Track Options

Please use the following codes to order a specific track for your system.

19” Foam with synthetic leather cover

19” Gel with synthetic leather cover





For 550 boards only


27” Gel with Lycra knit cover

For 400 and 500 boards only

20” and 7” Foam with synthetic leather cover

20” and 7” Gel with synthetic leather cover

For 400 and 500 boards only



Standard 21.625” track

F

G

F20

G20

F25

G25

F27

G27

FMP

GMP

MP7F

MP7G

22

$25

$46

$25

$46

$32

$54

$33

$52

$40

$64

$16

$20

N/C

4

5

Standard 21.625” trackRT22 $52

Replacement Tracks with Hardware Pack (if ordering without mechanism)

19

Keyboard System Accessories

Mouse Pads Corner Sleeves

HSMP12TIPS $6

8” 12 Tips ergo Mouse Pad

HSMP12TIPS10 $7

9” 12 Tips ergo Mouse Pad

CMPGeL8 $31

8.5” Gel Mouse Pad For 90 or 90H Clip Mouse

CMPGeL $31

10” Gel Mouse Pad For 91 or 91H Clip Mouse

MPGeL8 $25

8.5” Gel Mouse Pad

MPGeL10 $31

10” Gel Mouse Pad

GPSMP $44

Desktop Mouse Pad with Gel Palm

Palm Support

MM10 $19

Mouse Mate

GPS $52

Desktop Gel Palm Support

De100 $154

29.5” x 12.188” Fits desks 1” to 1.5” thick

De200/De250 $97

16” diameter DE200 fits desks 1” to 1.5” thick DE250 fits desks 1.5” to 2.5” thick

De400/De450 $251

38.5” x 13.75” DE400 fits desks 1” to 1.5” thick DE450 fits desks 1.5” to 2.5” thick

20"

16”

20


Cable Management

NL17SB (Black) $25

NL17SG (Gray) $25

Small 2.6” Diameter, 17” Length

NL24SB (Black) $26

NL24SG (Gray) $26

Small 2.6” Diameter, 24” Length

NeatLinks — Large 17”

NL17LB (Black) $25

NL17LG (Gray) $25

Large 3.6” Diameter, 17” Length

NeatLinks — Large 24”

NL24LB (Black) $25

NL24LG (Gray) $25

Large 3.6” Diameter, 24” Length

NeatLinks — Small 24”

NeatLinks — Small 17”

Humanscale

Humanscale

Humanscale

Humanscale

Humanscale

21

CPU450 $157

Fits CPUs 4” to 8” by 11.5” to 20”Max CPU Weight: 50 lbs.

Installed Dimensions:CPU Width + 2.5”, CPU Height + 3.75”

CPU450STK $40

Swivel Track Upgrade Kit

CPU555 $197

Fits CPUs 3” to 9.5” wide by 12” to 22” high

Max CPU Weight: 70 lbs.

Installed Dimensions:CPU Width + 3.5”, CPU Height + 4.5”

CPU555SeC $235

With Security System

CPU555STOOL $32

Replacement Tool Kit for CPU555SEC (comes standard with CPU555SEC)

CPU555SeCKIT $60

Retrofit Security Kit for CPU555 (comes standard with CPU555SEC)

CPU300 $170

Fits CPUs 3.25” to 9” wide by 10.5” to 18” high Max CPU Weight: 70 lbs.

Installed Dimensions:CPU Width + 1.5”, CPU Height + 3”

CPU Dolly

CPUDLY $184

Fits CPUs 3.25” to 9” wide

Installed Dimensions: CPU Height + 3.75”

CPUDLYPLT $197

With Platform For CPUs 1.5” to 9” wide

CPUPLATFORM $20

CPU Dolly Retrofit Platform

CPUDLYH $46

Telescoping Pull Handle

CPU Holders


Quick Track

Quick Track

QT $16

Easily removable (without tools) front bracket makes swap-outs a snap.

To order, simply add “QT” to end of product code (e.g., CPU555QT).

Comes standard with CPU600.

CPU600 $202

Fits CPUs 3.5” to 9” wide by 12“ to 20” high Max CPU Weight: 50 lbs.

Installed Dimensions:7” or CPU Width + 1.7” (whichever is greater), CPU Height + 3.6”

22

Build Your Diffrient Technology Light Product Code

To create the product code for your Diffrient Light,

simply choose your preferred style, base features,

color, lamp, and accessories and combine the

respective codes for each.

1 Style

DTeCH1e $515 Single Arm with Work Shade

DIFFRIENT TECHNOLOGY LIGHT (DTECH SERIES)

3 Color

S Silver

B Black

E26 socket compatible with screw-in bulbs up to 60W

Base Features

P N/C

2 Outlets

T Add $24

2 Outlets with CAT5 Data Port

2

Diffrient Technology Light Diffrient Technology Light Product Code:

DTeCH2e $551 Double Arm with Work Shade

DTeCHT1e $515 Single Arm with Task Shade

DTeCHT2e $551 Double Arm with Task Shade

18”

18”

18”

18”

18”

18”

DIFFRIENT TECHNOLOGY LIGHT (DTECHT SERIES)

By special order, consult your Humanscale rep.Compatible with GU24 2-pin compact fluorescent bulbs.

Style

1 2

Mount Color

3

Lamp

4

Accessories

5

23

Grommet Cover For use with Clamp Mount C DLGC (black) $12

TASK LIGHT II AND WORK LIGHT II MOUNTS (DA & DX SeRIeS)

Diffrient Desktop Base DLBS (silver), DLBB (black) $150

Access Rail DLAS (silver), DLAB (black) $42

Clamp For grommet or edge mount DLCS (silver), DLCB (black) $42

2-Piece Clamp For edge mount DLKS (silver), DLKB (black) $60

Direct DLDS (silver), DLDB (black) $42

Universal Slatwall DLSS (silver), DLSB (black) $42

Wall DLWS (silver), DLWB (black) $42

Panel Mount DL — — — $72 (1): Panel System Code, (2): Color (B or S)

TASK AND WORK LIGHT ACCeSSORIeS (DT & DW SeRIeS)

electronic Ballast DLBALe (gray) $151

Magnetic Ballast DLBALM (black) No longer available

Lamp 26W, 3500K, 4-Pin Base DLBULB $26

Diffrient Light Replacement Parts (if purchased separately)

1 1 2

WORK LIGHT II AND TeCHNOLOGY LIGHT ACCeSSORIeS (DX & DTeCH SeRIeS)

Lamp 18W, 3500K, screw-in base DLCFL1 $10Lamp 23W, 3500K, screw-in base DLCFL2 $10Lamp 13W, 3500K, screw-in base DLCFL3 $10Lamp 9W, 3500K, screw-in base DLCFL4 $10Lamp 18W, 2700K, screw-in base DLCFL6 $10

TASK LIGHT II AND TeCHNOLOGY LIGHT ACCeSSORIeS (DA SeRIeS & DTeCHT SeRIeS)

Lamp 18W, 3500K, GU24 base DLSLIMA $10Lamp 13W, 3500K, GU24 base DLSLIMC $10Lamp 9W, 3500K, GU24 base DLSLIMD $10Lamp 18W, 2700K, GU24 base DLSLIMe $10

TeCHNOLOGY LIGHT ACCeSSORIeS (DTeCH & DTeCHT SeRIeS)

3’ CAT5 User Internet Cord CAT5CORD3 $610’ CAT5 Supply Internet Cord CAT5CORD10 $12

4 Lamp

DIFFRIENT TECHNOLOGY LIGHT (DTECH SERIES)

1 18W, 3500K, E26 socket (standard) N/C 2 23W, 3500K N/C3 13W, 3500K N/C4 9W, 3500K N/C6 18W, 2700K N/C0 No Bulb Less $6

DIFFRIENT TECHNOLOGY LIGHT (DTECHT SERIES)

A 18W, 3500K, GU24 base (standard) N/C C 23W, 3500K N/CD 13W, 3500K N/Ce 9W, 3500K N/C

5 AccessoriesFor Base “T” ONLY

— No accessories N/C C3 3’ CAT5 User Internet Cord (red) $6C10 10’ CAT5 Supply Internet Cord (black) $12CB Both 3’ User Internet Cord and 10’ Supply Internet Cord $18

24

Build Your Diffrient Light Product Code

Style

1

Diffrient Task Light II and Work Light II Product Code:

To create the product code for your Diffrient Light, simply choose

your preferred style, mount, color and lamp, and combine the

respective codes for each.

1 Style

DA1e $348 Single Arm with Task Shade

DA2e $386 Double Arm with Task Shade

DX1e $348 Single Arm with Work Shade

DX2e $386 Double Arm with Work Shade

DIFFRIENT TASK LIGHT II (DA SERIES) DIFFRIENT WORK LIGHT II (DX SERIES)

18”

18”

18”

18”

18”

18”

2

Mount Color

3

Lamp

4

Compatible with GU24 2-pin compact fluorescent bulbs. E26 socket compatible with screw-in bulbs up to 60W.

Mount

B Add $108

Diffrient Desktop Base 9” diameter

C N/C

Clamp For grommet or edge mount. Fits surfaces up to 2” thick and grommet holes 2” or more in diameter.

2

K Add $18

2-Piece Clamp Requires minumium 1/4” clearance between desk and wall or panel.

G Add $12

Clamp with Grommet Cover For grommet holes 2” – 3.25” in diameter.

Diffrient Task Light II and Work Light II

25

2 Mount, cont.

D N/C Direct Screws into horizontal surface.

S N/C Universal Slatwall Adjusts to fit most standard slatwalls.

W N/C Wall Screws into vertical surface.

Panel Mount Add $30 PC Allsteel ConcensysP2 Allsteel Terrace 2.6 & 3.4, AlignPH Haworth Places, UnigroupPM Haworth PremisePA Herman Miller Action OfficePR Herman Miller ResolveP9 Steelcase 9000PB Teknion BoulevardPI Teknion IEPL Teknion Leverage, TransitNot compatible with corner mount applications. For other panel systems, see your Humanscale representative.

3 Color

S Silver

B Black

A N/C Humanscale Access Rail

4 Lamp

DIFFRIENT WORK LIGHT II (DX SERIES)

A 18W, 3500K, GU24 base (standard) N/CC 13W, 3500K N/CD 9W, 3500K N/Ce 18W, 2700K N/C

1 18W, 3500K, E26 socket (standard) N/C2 23W, 3500K N/C3 13W, 3500K N/C4 9W, 3500K N/C6 18W, 2700K N/C7 18W, 5500K, Full Spectrum Add $240 No Bulb Less $6

DIFFRIENT TASK II LIGHT (DA SERIES)

NM N/C No Mount

U Add $30 Universal Panel Mount Adjusts to fit most panels that use vertical slotted rails for mounting accessories. Not compatible with corner applications.

26

Build Your Element Light Product Code

Style

1

Element Light Product Code:

To create the product code for your Element Light,

simply choose your preferred style, plug, mount and

color, and combine the respective codes for each.

1 Style

eL $474 7-Watt element LeD Light

e N/C North America

U Add $5 Universal (4 interchangeable plugs)

14”

2

Plug Mount

3

Color

4

Mount

B Add $60

element Desktop Base 8” diameter

C N/C Clamp For grommet or edge mount. Fits surfaces up to 2” thick and grommet holes 2” or more in diameter.

3

K Add $18 2-Piece Clamp Requires minumium 1/4” clearance between desk and wall or panel.

G Add $12 Clamp with Grommet Cover For grommet holes 2” – 3.25” in diameter.

Element Light

2 Plug

14”

27

Grommet Cover For use with Clamp Mount C DLGC (black) $12

eLeMeNT LIGHT MOUNTS

element Desktop Base eLBS (silver), eLBW (white) $90

Access Rail DLAS (silver) $42

Clamp For grommet or edge mount DLCS (silver) $42

2-Piece Clamp For edge mount DLKS (silver), eLKW (white) $60

Direct DLDS (silver), eLDW (white) $42

Universal Slatwall DLSS (silver) $42

Wall DLWS (silver) $42

Panel Mount DL — — — $72 (1): Panel System Code, (2): Color (B or S)

3 Mount, cont.

D N/C Direct Screws into horizontal surface.

S N/C Universal Slatwall Adjusts to fit most standard slatwalls.

W N/C Wall Screws into vertical surface.

Panel Mount Add $30 PC Allsteel ConcensysP2 Allsteel Terrace 2.6 & 3.4, AlignPH Haworth Places, UnigroupPM Haworth PremisePA Herman Miller Action Office, VivoPe Herman Miller EthospacePR Herman Miller ResolveP9 Steelcase 9000PB Teknion BoulevardPI Teknion IEPL Teknion Leverage, TransitNot compatible with corner mount applications. For other panel systems, see your Humanscale representative.

4 Color

S Silver

W White

A N/C Humanscale Access Rail

Element Light Replacement Parts (if purchased separately)

1 1 2

Replacement LeD Head Kit eLHeADKITS $120

NM N/C No Mount

Note: All Silver lamps ship with Silver mounts. All White lamps ship with White mounts for the Desktop Base (B), Two-Piece Clamp Mount (K), and Direct Mount (D). All other mounting options ship with Silver.

North American Plug Set eLPLUGe $42

Universal Plug Set eLPLUGU $60

Occupancy Sensor Power Strip

OCCSTRIP Add $288 8-outlet power strip with energy-saving personal occupancy sensor

28

Access Rail Component Pricing Chart

To determine the product code and list price for your Access Rail, identify each component required for your two-post configuration. For configurations requiring more than two posts, you must create a separate product code for add-on configurations.

1

POST HeIGHT

(# COLLARS)

2

COLOR

4

# RAILSMOUNTING STYLe

(# POSTS)

3

POST HeIGHT/NUMBeR OF COLLARS: Choose the height of the posts that will support the Access Rail. Posts height is based on the number of collars. Collars are 5.9” in height (150mm). The price for the posts is listed with Component #3.

COLOR: Silver is standard. Custom colors may be available.

POST QUANTITY & MOUNTING STYLe: Choose the number of posts required. Each Access Rail requires a post on each side, however, every post can accommodate up to 4 rails (an ‘X’ pattern). Each Post has a collar, to which the rail attaches at any 30-degree interval around the post. Use 1 Post when attaching to an existing Access Rail system. For Mounting Style, choose from Bolt-Through Mount, Direct Mount or Clamp Mount.

NUMBeR OF RAILS: Select the desired number of rails noting that the maximum is one less than the number of collars. Note that only one rail can be used with 54” and 60” long rails.

RAIL LeNGTH: Select the rail length required for the surface to which you are mounting. Note that the rail length specified is actual rail length, not desk length, and that posts and mounts take up space that must be accommodated.

1

2

3

4

S

2BT2DM2CM2LC

1BT1DM1CM1LC

COLOR POST QUANTITY &MOUNTING STYLe

Silver

2 Posts, Bolt-Through2 Posts, Direct Mount2 Posts, Clamp Mount2 Posts, Low-Profile Clamp Mount

1 Post, Bolt-Through1 Post, Direct Mount1 Post, Clamp Mount1 Post, Low-Profile Clamp Mount

2

$ 0

456456588540

228228294270

3

$ 0

552552684636

276276342318

4

$ 0

816816948

—

408408474

—

5

$ 0

912912

1044 —

456456522

—

POST HeIGHT/NUMBeR OF COLLARS

1

2

3

5

RAIL LeNGTH

5

PRODUCT

A1 S

Two Posts for Initial Access Rail Configuration

One Post for Add-On Configuration

COMPONENT CODE DESCRIPTION TWO COLLARS THREE COLLARS FOUR COLLARS FIVE COLLARS

29

1824303642485460

NUMBeR OF RAILS

RAIL LeNGTH

Rail

18” Rail24” Rail30” Rail36” Rail42” Rail48” Rail54” Rail60” Rail

5

4

COMPONENT CODE DESCRIPTION ONE RAIL TWO RAILS THREE RAILS FOUR RAILS

1

216240264312360414468528

2

432480528624720828

——

3

648720792936

10801242

——

4

864960

1056124814401656

——

30

ADDITIONAL RAILS Additional rails required only if ordering additional rails after initial Access Rail installation.

Code Description List Price

A118S

A124S

A130S

A136S

A142S

A148S

A154S

A160S

18” Rail24” Rail30” Rail36” Rail42” Rail48” Rail54” Rail60” Rail

$216240264312360414468528

ACCeSSORIeS


A11000B

A11001B

A11002B

A11003B

A11004B

A11005B

A11007B

A11008B

A11009B

A11014B

Pencil Cup, BlackCD Holder, BlackHanging File Holder, BlackPaper Tray, BlackAccessory Tray, BlackPhone Holder, BlackLegal/A4 Paper Tray, BlackFolder Sorter Tray, BlackBinder Holder, BlackCup Holder, Black

$223622654653667736242236226546536677362490

114

eQUIPMeNT ARMSConsult the Humanscale Monitor Arms Pricing and Specification Guide for complete specs and additional configuration options.


MONITOR ARMS

M7N1S9S4

M4N1SAS4

NOTEBOOK HOLDERS

M7N1S9S4L

M4N1SAS4L

M7 with Folding Links, Silver

M4 with Adjustable Arm, Silver

M7 with Folding Links, for Laptop, Silver

M4 Adjustable Arm, for Laptop, Silver

$348

546

486

684

Access Rail Extras

eXTeNSION KITExtends existing 2-Collar Post to 4-Collar Post; extends 3-Collar Post to 5-Collar Post.


A1eX2 2-Collar Extension Kit

$216

A11000C

A11001C

A11002C

A11003C

A11004C

A11005C

A11007C

A11008C

A11009C

A11014C

A1PSSS

A1PSLS

Pencil Cup, ClearCD Holder, ClearHanging File Holder, ClearPaper Tray, ClearAccessory Tray, ClearPhone Holder, ClearLegal/A4 Paper Tray, ClearFolder Sorter Tray, ClearBinder Holder, ClearCup Holder, ClearSmall Peripheral Shelf, 12.5” x 10”, Silver Large Peripheral Shelf, 18” x 12.5”, Silver

The following components and accessories are ordered separately from the Access Rail.

31

M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:51

TITLE

M7C

PROJECT

DO NOT SCALE DRAWING

TOLERANCES UNLESS NOTED[INCHES].XXX = ± .005.XX = ± .010

MATERIAL

DRAWN BY DATEMV 10/25/06

11 East 26th Street, NYC, NY 10010TEL: 212 725 4749, FAX: 212 725 7545

Humanscalemm.XX = ± .10.X = ± .25

ANGLES = ± 1 ?

WEIGHT g

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HUMANSCALE. ANY REPRODUCTION OR DISTRIBUTION IN PART OR AS A HOLE WITHOUT THE WRITTEN PERMISSION OF HUMANSCALE IS PROHIBITED.

REV. DESCRIPTION DATE BY

76.3 MIN268 MAX

250

M7L $378M7S-L SilverM7B-L Black

B1 Bracket-Mounted Arm, Two M7 Standard 8” Links, Bolt-Through Mount with Slim Post. Accommodates one monitor, up to 30 pounds.

M7A $420M7S-A-ZZ* SilverM7B-A-ZZ* Black

Top-Mounted Arm Bracket, Two M7 Standard 8” Links, Grommet Mount, with Adjustable Standard Post. Accommodates one monitor, up to 28 pounds.

M7C $408M7S-C SilverM7B-C Black

B1 Bracket-Mounted Arm, Two M7 Standard 8” Links, Two-Piece Low-Profile Clamp Mount with Slim Post. Accommodates one monitor, up to 30 pounds.

M7/ M4 Common Configurations

M7M $420M7S-M SilverM7B-M Black

B1 Bracket-Mounted Arm, Two M7 8” Folding Links, Two-Piece Low-Profile Clamp Mount with Slim Post. Accommodates one monitor, up to 30 pounds.

*Replace “ZZ” with appropriate code based on monitor weight. When monitor weight falls within more than one weight range, choose the selection with a mid-range closest to actual monitor weight. Monitor weight: 4 – 9 lbs. [ZZ=15]; 9 – 14 lbs. [ZZ=17]; 11 – 18 lbs. [ZZ=19]; 13 – 21 lbs. [ZZ=21]; 16 – 28 lbs. [ZZ=23].

32

M7P $684M7S-P SilverM7B-P Black

B2 Bracket-Mounted Arms, Two M7 8” Folding Links for each arm, Two-Piece Heavy-Duty Clamp Mount with Non-Adjustable Standard Post. Accommodates two monitors, up to 30 pounds each.

M7R $660M7S-R SilverM7B-R Black

B2 Bracket-Mounted Arms, Two M7 Standard 8” Links for each arm, Two-Piece Heavy Duty Clamp Mount, Non-Adjustable Standard Post. Accommodates two monitors, up to 30 pounds each.

M7N $390M7S-N SilverM7B-N Black

B1 Bracket-Mounted Arm, Two M7 8” Folding Links, Bolt-Through Mount with Slim Post. Accommodates one monitor, up to 30 pounds.

M7Q $618M7S-Q SilverM7B-Q Black

B2 Bracket-Mounted Arms, Two M7 8” Folding Links for each arm, Bolt-Through Mount, Non-Adjustable Standard Post. Accommodates two monitors, up to 30 pounds each.

33

M4T $1080M4S-T SilverM4B-T Black

B2 Bracket Mounted Arms, Two M4 Adjustable Double-Link Arms, Two-Piece Heavy-Duty Clamp Mount with Non-Adjustable Standard Post. Accommodates two monitors, 5 – 20 pounds each.REV. DESCRIPTION DATE BY

M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:51

TITLEM4V

PROJECT


TOLERANCES UNLESS NOTED[INCHES].XXX = .005.XX = .010

MATERIAL



Humanscalemm.XX = .10.X = .25

ANGLES = 1

WEIGHT g


Replace “PP” with model-specific systems furniture mount; see page 10. *

M7S $594M7S-S SilverM7B-S Black

B2 Bracket-Mounted Arms, Two M7 Standard 8” Links for each arm, Bolt-Through Mount with Non-Adjustable Standard Post. Accommodates two monitors, up to 30 pounds each.

M4U $1014M4S-U SilverM4B-U Black

B2 Bracket-Mounted Arms, Two M4 Adjustable Double-Link Arms, Bolt-Through Mount with Non-Adjustable Standard Post. Accommodates two monitors, 5 – 20 pounds each.

M4V $558M4S-V-PP* SilverM4B-V-PP* Black

N1 No-Post Arm Bracket, M4 Adjustable Double-Link Arm, Panel Mount. Accommodates one monitor, 5 – 20 pounds.

34

M4X $588M4S-X SilverM4B-X Black

B1 Bracket-Mounted Arm, M4 Adjustable Double-Link Arm, Bolt-Through Mount with Slim Post. Accommodates one monitor, 5 – 20 pounds.

M4Z $564M4S-Z SilverM4B-Z Black

Top-Mounted Arm Bracket, M4 Adjustable Double-Link Arm, Bolt-Through Mount with Slim Post. Accommodates one monitor, 5 – 20 pounds.

644.95 25.392


M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:51

TITLEM4Y

PROJECT



MATERIAL




ANGLES = 1

WEIGHT g


M4Y $594M4S-Y SilverM4B-Y Black

Top-Mounted Arm Bracket, M4 Adjustable Double-Link Arm, Two-Piece Low-Profile Clamp Mount with Slim Post. Accommodates one monitor, 5 – 20 pounds.

M4W $618M4S-W SilverM4B-W Black

B1 Bracket-Mounted Arm, M4 Adjustable Double-Link Arm, Two-Piece Low-Profile Clamp Mount with Slim Post. Accommodates one monitor, 5 – 20 pounds.

35

M2B $354

M2BW Polished Aluminum with White TrimM2BS Silver with Gray Trim

M2 Monitor Arm with Bolt-Through Mount. Accommodates one monitor up to 20 lbs.


M2C $354

M2CW Polished Aluminum with White TrimM2CS Silver with Gray Trim

M2 Monitor Arm with Clamp Mount. Accommodates one monitor up to 20 lbs.

M2D $378M2DW Polished Aluminum with White TrimM2DS Silver with Gray Trim

M2 Monitor Arm with Dual Mount. Accommodates one monitor up to 20 lbs.

36

M8B <drawing of M8 with bolt-through mount>

M8BW Polished Aluminum with White Trim $552M8BS Silver with Gray Trim

M8 Monitor Arm with Bolt-Through Mount. Accommodates one monitor ranging 8-42 lbs.

With Crossbar

M8BW-C Polished Aluminum with White Trim and Crossbar $708M8BS-C Silver with Gray Trim and Crossbar

M8 Monitor Arm with Bolt-Through Mount and Crossbar. Supports two monitors side-by-side up to 42 lbs.


M8CM8CW Polished Aluminum with White Trim $552M8CS Silver with Gray Trim

M8 Monitor Arm with Clamp Mount. Accommodates one monitor ranging 8-42 lbs.

With Crossbar

M8CW-C Polished Aluminum with White Trim and Crossbar $708M8CS-C Silver with Gray Trim and Crossbar

M8 Monitor Arm with Clamp Mount and Crossbar. Supports two monitors side-by-side up to 42 lbs.

37

M8 Common Configurations, cont.

M8D <drawing of M8 with dual mount>

M8DW Polished Aluminum with White Trim $576M8DS Silver with Gray Trim

M8 Monitor Arm with Dual Mount. Accommodates one monitor ranging 8-42 lbs.

With Crossbar

M8DW-C Polished Aluminum with White Trim and Crossbar $732M8DS-C Silver with Gray Trim and Crossbar

M8 Monitor Arm with Dual Mount and Crossbar. Supports twomonitors side-by-side up to 42 lbs.

38

For orders call 800.400.0625

ARM STYLe Choose the desired arm style (M7 shown). There is one character in the product code for arm style. To order a monitor arm for one monitor, only one character (component #3) is required. To order an arm for two monitors (as with N2 or B2 Brackets), use #3 and #3b to specify the left arm style, then the right arm style (in that order). To order an arm for three monitors (B3 Brackets), use #3 and #3b and #3c to specify the left arm style, the middle arm style, and the right arm style (in that order).

ADD-ONS Enhance the function of your monitor arm with optional Add-Ons. Simply include the applicable codes for the desired Add-On. For example, for the Quick Release Add-On only, add a QR to the end of the product code. For a Quick Release and a Post Stop, the product code would end in QRPS.

ACCeSSORIeS Monitor Arm Accessories are ordered separately from the monitor arm itself. Product codes for Accessories, detailed on page 14, are not included in your monitor arm product code.

Build Your Monitor Arm Product Code

To determine the list price for your monitor arm solution, identify your choice for each component and build the product code as shown on the right. Add the prices for all the options selected.


M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:51

TITLE

Post Stop in Context

PROJECT



MATERIAL




ANGLES = 1

WEIGHT g


BRACKeT STYLe Choose the appropriate Bracket based on number of monitors and bracket style. There are two characters in the product code for Bracket Style.

1

POST STYLe Choose the desired Post, if applicable. There are two characters in the product code for Posts.

5

6

3

MOUNT STYLe Choose the desired mount based on your mounting surface. There are two characters in the product codefor Mounts.

4

COLOR 2

1

BRACKeT STYLe

2

COLOR

4

MOUNT

5

POSTSTYLe

6

ADD-ONS (if applicable)

ARM STYLe(3b and 3c,

if applicable)

3c3b3

PRODUCT

“M7”or

“M4”

38

39

BSA

01234589

01234589

01234589

NMXVXHBTCMLCLPDMGM

COLOR

ARM STYLe

ARM STYLeIf necessary.Use with N2,B2 or B3 only.

ARM STYLeIf necessary.Use with B3 only.

MOUNTSTYLe2

HorizontalSurfaces

BlackSilverPolished Aluminum1

Ball Joint OnlyOne Standard 8” LinkTwo Standard 8” LinksOne Standard 12” Long LinkTwo Standard 12” Long LinksOne 12” Long Link/One 8” Standard LinkOne 8” Folding LinkTwo 8” Folding Links



No Mount, except as noted with Stackable Posts belowNo Mount, with Stackable Post for Vertical SurfaceNo Mount, with Stackable Post for Horizontal SurfaceBolt-Through MountTwo-Piece Heavy-Duty Clamp MountTwo-Piece Low Profile Clamp MountOne-Piece Low Profile Clamp MountDirect MountGrommet Mount

$66

00

78

60138180162210198144192

––––––––

––––––––

–

––––––––

$78

00

102

60138180162210198144192

60138180162210198144192

––––––––

–

––––––––

$42

00

78

60138180162210198144192

–––––––– ––––––––

0

00

4811478484866

$66

00

78

60138180162210198144192

––––––––

––––––––

0

00

4811478484866

$78

00

102

60138180162210198144192

60138180162210198144192

––––––––

0

00

4811478484866

$90

00

126

60138180162210198144192

60138180162210198144192

–138180162210198144192

0

00

4811478484866

Base Price:

BRACKeT STYLe1

2

3

4

3c

2 Monitors

B2

3 Monitors

B3

1 Monitor

N1

2 Monitors

N2

1 Monitor

T1

1 Monitor

B1

NO POSTBRACKETS

POST WITH BRACKET MOUNT

TOP-MOUNT BRACKET

M7 Component Pricing ChartCOMPONENT CODE DESCRIPTION

3b


M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:22

TITLE

PROJECT



MATERIAL

DRAWN BY DATE



ANGLES = 1

WEIGHT g


N1 for Slatwall-StandardMV 11/01/06


M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:21

TITLE

N2 for Slatwall Standard

PROJECT



MATERIAL




ANGLES = 1

WEIGHT g



M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:51

TITLE

Post Stop in Context

PROJECT



MATERIAL




ANGLES = 1

WEIGHT g


M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:51

TITLEM7C

PROJECT


TOLERANCES UNLESS NOTED[INCHES].XXX = ± .005.XX = ± .010

MATERIAL



Humanscalemm.XX = ± .10.X = ± .25

ANGLES = ± 1 ?

WEIGHT g



76.3 MIN268 MAX

250


M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:101

TITLE

M7H

PROJECT



MATERIAL




ANGLES = 1

WEIGHT g



M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:102

TITLEM7G with B3

PROJECT



MATERIAL




ANGLES = 1

WEIGHT g


40

WD

WUWK

SDSWSSSRSNSWSeSUSISUSXSCSLSSSNSBSBSNSW

S2

S4

PCP2PHPMPHPAPePRP9PIPL

Wall Stud

StandardSlatwall3

UniversalSlatwall3

PanelMounts

Standard Wall Stud Mount, Supports Multiple MonitorsUniversal Wall Stud Mount, Single Monitors OnlyKnuckle Wall Stud Mount

Dates Weiser Slatwall EDP Contour Slatwall EDP Slatwall Eurocraft Slatwall Evans Consoles Forecast Slatwall Herman Miller Slatwall Humanscale Access Rail Innovant (CBA) Slatwall Kimball Slatwall LaCour Extrusion (Beam)LaCour Standard Slatwall Novalink Slatwall SBFI Universal Slatwall SBFI/Triax Slatwall TBC Slatwall Wall Street TradingWilson Slatwall Woodtronics Slatwall

Universal Slatwall, Supports Single Monitors Only: Dates Weiser, Eurocraft, Evans Console, Forecast, Haworth, Innovant (CBA), Kimball, Knoll Currents, Knoll Extra, LaCour, SBFI/Triax, Steelcase Details, TBC, Teknion Leverage, Teknion Transit, Woodtronics, Wright Line

Universal Slatwall, Supports Single Monitors Only: Humanscale Access Rail Allsteel ConcensysAllsteel Terrace 2.6, 3.4Haworth PlacesHaworth PremiseHaworth UnigroupHerman Miller Action OfficeHerman Miller EthospaceHerman Miller ResolveSteelcase 9000Teknion ieTeknion Leverage

$96

9648

96969696969696969696969696969696969696

90

90

102102102102102102102102102102102

$ 96

––

96969696969696969696969696969696969696

–

–

102102102102102102102102102102102

$ 96

––

96969696969696969696969696969696969696

90

90

102102102102102102102102102102102

$ 96

––

96969696969696969696969696969696969696

90

90

102102102102102102102102102102102

$ 96

––

96969696969696969696969696969696969696

–

–

102102102102102102102102102102102

$ 96

––

96969696969696969696969696969696969696

–

–

102102102102102102102102102102102

COMPONENT CODE DESCRIPTION

2 Monito

rs

3 Monito

rs

1 Monito

r

2 Monito

rs

1 Monito

r

1 Monito

r

NO POSTBRACKETS


TOP-MOUNT BRACKET

41


1 Polished Aluminum requires 8–10 weeks for delivery after receipt of order.2 Choose one mount from Horizontal Surfaces, Wall Stud Mounts, Slatwall Mounts (Standard or Universal) or Panel Mounts. 3 Standard Slatwall accommodates multiple monitors or a post. Universal Slatwall is for single monitors only. 4 Slim Posts only available for use with single arms or double arms with maximum monitor weight of 30 pounds.5 Crossbar only available with a B2 Bracket and two M7 8” Folding Link Arms (Arm Style 9) or two M4 Adjustable Double Link Arms (Arm Style A).

6 When ordering Notebook Holder with two-monitor configurations, a single Notebook Holder will be placed on the right arm. 7 Standard Keyboard Holder consists of 19” board with 8” round mousing surface and gel palm support for both; Humanscale #900-11R-G.8 Wide Keyboard Holder consists of 25” keyboard/mousing board with gel palm support.

$ 0–––––––––––––

024

096

0–

0 – –

0138

0360336

NP1V2VTV1H2HTHSLSP1517192123

–QR

–RL

–PS

–C2C3

–NH

–KSKW

POST STYLe

QUICK ReLeASe

ROTATINGBALL JOINT

POST STOP

CROSSBAR

NOTeBOOK HOLDeR

KeYBOARD HOLDeR

No PostOne-Row Stackable Post for Vertical Surfaces4

Two-Row Stackable Post for Vertical SurfacesTop Row Stackable Post for Vertical SurfacesOne-Row Stackable Post for Horizontal SurfacesTwo-Row Stackable Post for Horizontal SurfacesTop Row Stackable Post for Horizontal SurfacesSlim (non-adjustable)4

Standard Post, Non-AdjustableStandard Post, Adjustable, for 4 – 10 lb. Monitor Standard Post, Adjustable, for 9 – 14 lb. MonitorStandard Post, Adjustable, for 11 – 18 lb. MonitorStandard Post, Adjustable, for 13 – 21 lb. MonitorStandard Post, Adjustable, for 16 – 28 lb. Monitor

Standard, No Quick ReleaseQuick Release

Standard, No Rotating Ball JointRotating (w/Lock)

Standard, No Post StopPost Stop (180˚)

Standard, No CrossbarCrossbar For 2 Monitors5

Crossbar For 3 Monitors5

Standard, No Notebook HolderNotebook Holder6

Standard, No Keyboard HolderKeyboard Holder, Standard7

Keyboard Holder, Wide8

$ 0–––––––––––––

048

0192

0–

0 264 348

0138

0––

$ 0––––––

84108132132132132132

024

096

024

0–– 0

138

0––

$ 072

13860

1321986084

108132132132132132

024

096

036

0–

–

0138

0360336

$ 072

13860

1321986084

108132132132132132

048

0192

072

0 264348

0138

0––

$ 72

13860

13219860

108132132132132132

072

0288

0–

0 – –

0–

0––

2

5

ADD-ONS

6a

6e

6b

6c

6d

2 Monito

rs

3 Monito

rs

1 Monito

r

2 Monito

rs

1 Monito

r

1 Monito

r

6f

NO POSTBRACKETS


TOP-MOUNT BRACKET

42

1 Monitor

T1

COLOR1

ARM STYLe

ARM STYLe(if applicable)

MOUNTSTYLe

HorizontalSurfaces

Wall Stud

StandardSlatwall3

BS

AB

AB

NMBTCMLCLPDMGM

WDWUWK

SDSWSSSRSNSWSeSUSISUSXSCSLSSSNSBSBSNSW

BlackSilver

Adjustable Double-Link ArmAdjustable Single-Link Arm

Adjustable Double-Link ArmAdjustable Single-Link Arm

No MountBolt-Through MountTwo-Piece Heavy-Duty Clamp MountTwo-Piece Low Profile Clamp MountOne-Piece Low Profile Clamp MountDirect MountGrommet Mount

Standard Wall Stud Mount, Supports Multiple MonitorsUniversal Wall Stud Mount, Single Monitors OnlyKnuckle Wall Stud Mount

Dates Weiser Slatwall EDP Contour Slatwall EDP Slatwall Eurocraft Slatwall Evans Consoles Forecast Slatwall Herman Miller Slatwall Humanscale Access Rail Innovant (CBA) Slatwall Kimball Slatwall LaCour Extrusion (Beam)LaCour Standard Slatwall Novalink Slatwall SBFI Universal Slatwall SBFI/Triax Slatwall TBC Slatwall Wall Street TradingWilson Slatwall Woodtronics Slatwall

$ 66

00

390330

––

–––––––

969648

96969696969696969696969696969696969696

$ 78

00

390330

390330

–––––––

96––

96969696969696969696969696969696969696

$ 42

00

390330

––

048

11478484866

–––

96969696969696969696969696969696969696

$ 66

00

390330

––

048

11478484866

96––

96969696969696969696969696969696969696

$ 78

00

390330

390330

048

11478484866

96––

96969696969696969696969696969696969696

Base Price:

2 Monitors

B2

BRACKeT STYLe

2

1 Monitor

N1

REV. DESCRIPTION ECN# DATE APPROVED

THIRD ANGLE PROJECTIONAPPROVALS

[INCHES].XXX = .005.XX = .010

[MM].XX = .10.X = .25

TOLERANCES UNLESS NOTED

ANGLES = 1

DWG. REQ. NO.

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OFHUMANSCALE. ANY REPRODUCTION OR DISTRIBUTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HUMANSCALE IS PROHIBITED.

WEIGHT: g

SCALE: 1:1 SHEET 1 OF 1

DATENAME PROJECT

-B

MATERIAL:DRAWN BY:

CHECKED BY:ENG APPR. BY:

TITLE:

SIZE DWG. NO. REV -

-

- mm/dd/yy

mm/dd/yyM4 on N1

Price Guide

INTERPRET GEOMETRICTOLERANCING PER:

ANSI Y14.5M-1994

MV 06/27/07

-

2 Monitors

N2



[INCHES].XXX = .005.XX = .010

[MM].XX = .10.X = .25


ANGLES = 1

DWG. REQ. NO.


WEIGHT: g


DATENAME PROJECT

-B

MATERIAL:DRAWN BY:


TITLE:

SIZE DWG. NO. REV -

-

- mm/dd/yy

mm/dd/yyM4 on N1

Price Guide


ANSI Y14.5M-1994

MV 06/27/07

-

644.95 25.392


M7 Price Guide

BDRAWING NO.SCALE

1 SHEET OF

1:51

TITLEM4Y

PROJECT



MATERIAL




ANGLES = 1

WEIGHT g


1 Monitor

B1



[INCHES].XXX = .005.XX = .010

[MM].XX = .10.X = .25


ANGLES = 1

DWG. REQ. NO.


WEIGHT: g


DATENAME PROJECT

-B

MATERIAL:DRAWN BY:


TITLE:

SIZE DWG. NO. REV -

-

- mm/dd/yy

mm/dd/yyM4 B2

Price Guide


ANSI Y14.5M-1994

MV 06/27/07

-

1

2

3b

M4 Component Pricing ChartCOMPONENT CODE DESCRIPTION

3

For orders call 800.400.0625

4

NO POST BRACK-ETS


TOP-MOUNT BRACKET

43

S2

S4

PCP2PHPMPHPAPePRP9PIPL

NP1V2VTV1H2HTHSLSP

UniversalSlatwall3

PanelMounts

POST

Universal Slatwall, Supports Single Monitors Only:

Dates Weiser, Eurocraft, Evans Console, Fore-cast, Haworth, Innovant (CBA), Kimball, Knoll Currents, Knoll Extra, LaCour, SBFI/Triax, Steel-case Details, TBC, Teknion Leverage, Teknion Transit, Woodtronics, Wright Line

Universal Slatwall, Supports Single Monitors Only: Humanscale Access Rail

Allsteel ConcensysAllsteel Terrace 2.6, 3.4Haworth PlacesHaworth PremiseHaworth UnigroupHerman Miller Action OfficeHerman Miller EthospaceHerman Miller ResolveSteelcase 9000Teknion ieTeknion Leverage

No PostOne-Row Stackable Post for Vertical SurfacesTwo-Row Stackable Post for Vertical SurfacesTop Row Stackable Post for Vertical SurfacesOne-Row Stackable Post for Horizontal SurfacesTwo-Row Stackable Post for Horizontal SurfacesTop Row Stackable Post for Horizontal SurfacesSlim (non-adjustable)4

Standard Post, Non-Adjustable

$ 90

90

102102102102102102102102102102102

0––––––––

–

–

102102102102102102102102102102102

0––––––––

$90

90

102102102102102102102102102102102

0––––––

84108

$ 90

90

102102102102102102102102102102102

072

13860

1321986084

108

–

–

102102102102102102102102102102102

072

13860

1321986084

108

2 Monito

rs

1 Monito

r

2 Monito

rs

1 Monito

r

1 Monito

r


5

NO POSTBRACKETS


TOP-MOUNT BRACKET

44

1 Polished Aluminum not available with M4 Adjustable Monitor Arms.2 Choose one mount from Horizontal Surfaces, Wall Stud Mounts, Slatwall Mounts (Standard or Universal) or Panel Mounts. 3 Standard Slatwall accommodates multiple monitors or a post, Universal Slatwall is for single monitors only.

4 Slim Posts only available for use with single arms or double arms with maximum monitor weight of 30 pounds.5 Crossbar only available with a B2 Bracket and two M7 8” Folding Link Arms (Arm Style 9) or two M4 Adjustable Double Link Arms (Arm Style A).6 When ordering Notebook Holder with two-monitor configurations, a single Notebook Holder will be placed on the right arm.

2 Monito

rs

1 Monito

r

2 Monito

rs

1 Monito

r

1 Monito

r

6a

6b

Standard, No Quick ReleaseQuick Release

Standard, No Rotating Ball JointRotating (w/Lock)

Standard, No Post StopPost Stop (180˚)

Standard, no CrossbarCrossbar for 2 Monitors5

Crossbar for 3 Monitors5

Standard, No Notebook HolderNotebook Holder6

—QR

—RL

—PS

—C2C3

—NH

QUICK ReLeASe

ROTATINGBALL JOINT

POST STOP

CROSSBAR

NOTeBOOK HOLDeR

$ 024

096

0–

0 – –

0138

$ 048

0192

0–

0264348

0138

$ 024

096

024

0– –

0138

$ 024

096

036

0–

–

0138

$ 048

0192

072

0264348

0138

6c

6d

ADD-ONS

6e

COMPONENT CODE DESCRIPTION NO POSTBRACKETS


TOP-MOUNT BRACKET

45

LIST PRICEMODEL # DESCRIPTION

M7 and M4 Accessories

VESA Bracket Kit (Contains 75mm, 100mm Plates and

Hardware)

VESA Bracket Kit for FEAs (Contains 75mm, 100mm

Plates and Hardware)

Security Kit (Kensington Only, No Security Bolts Available)

Drop Down VESA Plate

180˚ Arm Stop, Top Mount, Black180˚ Arm Stop, Top Mount, Silver

180˚ Post Stop, Bracket Mount, Standard 8” Link, Black180˚ Post Stop, Bracket Mount, Long 12” Link, Black180˚ Post Stop, Bracket Mount, Folding Link, Black

Bolt-Through Mounting Kit

VBK

VBF

SCK

DVP

PST-BPST-S

PBS-B

PBL-B

PBF-B

BT

$24

24

48

48

2424

36

36

36

48

FEA, 6” Adj. For 4 – 9 lb. Monitors, SilverFEA, 6” Adj. For 4 – 9 lb. Monitors, Black

FEA, 6” Adj. For 9 – 14 lb. Monitors, SilverFEA, 6” Adj. For 9 – 14 lb. Monitors, Black

FEA, 6” Adj. For1 1 – 18 lb. Monitors, SilverFEA, 6” Adj. For 11 – 18 lb. Monitors, Black

FEA, 6” Adj. For 13 – 21 lb. Monitors, Silver FEA, 6” Adj. For 13 – 21 lb. Monitors, Black

FEA, 6” Adj. For 15 – 25 lb. Monitors, Silver FEA, 6” Adj. For 15 – 25 lb. Monitors, Black

FeA15S*FeA15B*

FeA17S*FeA17B*

FeA19S*FeA19B*

FeA21S*FeA21B*

FeA23S*FeA23B*

$120120

120120

120120

120120

120120

LIST PRICEMODEL # DESCRIPTION

*FEAs must be specified based solely on monitor weight as new lightweight monitors have redefined the relationship between monitor dimensions and monitor weight. When monitor weight falls within more than one FEA weight range, choose the FEA with a mid-range closest to the actual monitor weight. Humanscale bears no respon-sibility for FEAs incorrectly specified based on diagonal monitor measurements.

Humanscale and the EnvironmentReCYCLeD MATeRIALS

Product Recycled Content Recyclable Content LeeD Recycled Content Post-Consumer +1/2 Pre-Consumer

Diffrient Task and Work Light with Base 90% recycled (63% Post-Consumer, 27% Pre-Consumer) 90% recyclable 77%

Diffrient Technology Light 38% recycled (13% Post-Consumer, 25% Pre-Consumer) 98% recyclable 26%

Element Light, Element 790 81% recycled (55% Post-Consumer, 26% Pre-Consumer) 99% recyclable 68%

Tolomeo Light 77% recycled (40% Post-Consumer, 27% Pre-Consumer) 87% recyclable 52%

Freedom Chair 62% recycled (43% Post-Consumer, 19% Pre-Consumer) 90% recyclable 53%

Freedom Saddle/ Pony Saddle 59% recycled (41% Post-Consumer, 18% Pre-Consumer) 90% recyclable 50%

Liberty Chair 54% recycled (32% Post-Consumer, 22% Pre-Consumer) 93% recyclable 43%

Liberty Side Chair 85% recycled (49% Post-Consumer, 36% Pre-Consumer) 93% recyclable 67%

Cinto chair 26% recycled (15% Post-Consumer, 11% Pre-Consumer) 100% recyclable 21%

Diffrient World Chair 34% recycled (10% Post-Consumer, 24% Pre-Consumer) 97% recyclable 22%

M2 Monitor Arm 52% recycled (46% Post-Consumer, 6% Pre-Consumer) 99% recyclable 49%




Paramount 48% recycled (33% Post-Consumer, 15% Pre-Consumer) 99% recyclable 41%

Access Rail 98% recycled (70% Post-Consumer, 28% Pre-Consumer) 100% recyclable 84%

Keyboard Systems 25% recycled (15% Post-Consumer, 10% Pre-Consumer) 80% recyclable 20%

CPU600, CPU200 51% recycled (34% Post-Consumer, 17% Pre-Consumer) 99% recyclable 43%

CPU555, CPU450, CPU300, CPU Dolly 30% recycled (21% Post-Consumer, 9% Pre-Consumer) 90% recyclable 26%

NeatLinks 50% recycled (50% Post-Consumer, 0% Pre-Consumer) 100% recyclable 50%

L6 30% recycled (23% Post-Consumer, 7% Pre-Consumer) 90% recyclable 27%

46

THE FOLLOWING TERMS & CONDITIONS APPLY TO ALL HUMANSCALE PRODUCTS.

TeRMS OF PAYMeNTUpon approved credit, terms of payment are net 30 from date of shipment. Deposits may be required for large or custom orders. The processing of orders and/or shipment of orders placed may be delayed if the deposit is not received with the order or if customer’s account is in “Past Due” status.

CReDIT POLICYAll customers of Humanscale must complete a credit application, with current information, which must be signed by an owner or officer. A line of credit may be set by our Credit Department, however the basis for the line of credit may be changed or cancelled at our discretion and advance payment may be required. Any unpaid balance, upon which payments are not made according to the terms governing the sale, will be considered “Past Due” and will increase by a maximum of 2% per month, without forfeit of Humanscale’s right to payment.

Any customer who has failed to pay for goods delivered or services rendered in a timely manner shall be liable for all fees, expenses, disbursements, and charges (including all legal costs) incurred by Humanscale in collecting monies owed, as well as interest (at 24% per annum).

PURCHASe ORDeRSPurchase orders must include the following: “Bill To” and “Ship To” information—Company Name (Ship To company may be end user or installation company), Address, Telephone, Fax, Contact Person; End User Company Name; Requested Ship Date; Purchase Order Number; Special Delivery, Shipping and Packing Instructions (if applicable); Proper Discount Off Current List Price, Product Quantities and Full Model Numbers; and Total (List/Net).

ORDeR CHANGeS & CANCeLLATIONSAll changes to or cancellations of orders placed with Humanscale must be in writing and sent to Customer Service. Orders may be changed or cancelled without penalty if Humanscale is notified at least two (2) weeks before the scheduled ship date for standard orders (under 250 units), or at least three (3) weeks before the scheduled ship date for large orders (250 units or more). Order changes or cancellations made less than two (2) weeks before the scheduled ship date for standard orders or less than three (3) weeks before the scheduled ship date for large orders will incur a minimum change/cancellation fee of 10% of net. Irrespective of when notified, changes or cancellations are not binding upon Humanscale until Humanscale issues a written acknowledgment of the change or cancellation. Order changes are defined as the deletion of line items; changes in style, color, quantity or requested ship date; or ship-to address changes. Order changes that result in a quantity reduction may be subject to an additional small order fee or adjustment in pricing. Under no circumstances will changes or cancellations be accepted on any custom fabric, special order or custom product orders.

TAXeSHumanscale list prices do not include sales tax. Customer is responsible to remit all such tax. Humanscale requires a State Resale/Exemption Certification to be on file at its main office. Sales made without said Certificate will be charged the appropriate sales tax.

PRICeSAll discounts and list prices are subject to change without notice. Prices are those in effect at the time of order entry. If the requested shipment date is more than 90 days after the order date, Humanscale reserves the right to price said order based on the published list price as of the shipment date.

SMALL ORDeR FeeA 3% small order fee applies to all invoiceable orders of $1,500 net or less, including billable replacement parts, regardless of product category.

SHIPPING AND DeLIVeRYAll Humanscale orders are acknowledged with a promise date (scheduled ship date) based on the product with the longest lead time. Large orders may increase standard lead times. Standard shipping charges will be billed to customer. Custom platform orders require 4 to 6 weeks.

Seating orders, unless otherwise specified, will ship 4 to 6 weeks from the date of order. Unless otherwise contractually specified, Diffrient World, Freedom and Liberty chairs will ship with the base and frame disassembled. Chairs can be easily assembled in seconds without use of tools. Blanket-wrapped shipping is available for full truckloads of 200 or more Diffrient World, Freedom or Liberty Task and Conference chairs. Consult your Humanscale representative for blanket-wrapped shipping requirement for Cinto and the Liberty Side chair.

Ship Sets: All products ordered on a single purchase order will be delivered together in a single ship set. To break a ship set, customers must indicate “Ship as Available” on the purchase order. Upon request, customer accounts may be defaulted to ship all orders on an as-available basis.

Shipping Instructions: Humanscale will attempt to accommodate basic shipping instructions, such as “call ahead” or “deliver before 12:00 p.m.,” if clearly identified on the purchase order as “Shipping Instructions.”

Packing Instructions: Humanscale will attempt to accommodate basic packing instructions for internal delivery of specific items on an order, such as “Deliver to Joe Smith” or “Deliver to cube #218,” if clearly identified on the purchase order as “Packing Instructions.”

DeLIVeRY SHORTAGeSProduct shortages must be noted at the time of delivery and reported to the carrier for correction. Claims against Humanscale for shortages, errors, etc., must be made in writing and within three (3) days of the date of delivery or customer waives its right to make such a claim.

FReIGHT CLAIMSHumanscale will file all F.O.B. destination claims. In order to receive credit, customer agrees to cooperate and assist in the procedures set out by the carrier and Humanscale.

eXTeRNAL DAMAGeIf the shipping container shows any external damage, customer is instructed to refuse the product at time of delivery. If it is a multiple piece shipment, customer may refuse only the damaged items. Humanscale will not issue full credit for returned product unless customer takes the following action steps:

Humanscale Terms and Conditions

47

48

1. Note damage on the delivery receipt at time of delivery.2. Refuse product at time of delivery.3. Contact Humanscale Customer Service within 24 hours of the attempted delivery and advise them of the damage.4. Enter a chargeable replacement order; credit will be issued after the disposition of damaged product is determined.

CONCeALeD DAMAGe/LOSSIf customer determines that there is internal damage not visible at time of delivery, customer will retain all packaging materials and take the following action steps within fifteen (15) calendar days from the date of delivery:1. Request inspection by calling local freight carrier to report damage.2. Retain merchandise in the original box.3. Call your Humanscale Customer Service agent to provide order and product information.4. Get a copy of the inspection report from carrier.5. Enter a chargeable replacement order; credit will be issued after the disposition of damaged product is determined.

STORAGeIf a customer is unable to accept a scheduled product delivery, Humanscale, if notified in writing after product assembly and prior to the scheduled ship date, will store the product at customer’s expense. Humanscale shall invoice customer for the product and monthly Storage Fees.

Storage Fees will be 1% of the net order value per month or actual storage costs—whichever is greater. Storage Fees are calculated with a one-month minimum and will not be pro-rated. If customer is unable to accept a scheduled product upon delivery, customer shall be responsible for placing the product in storage and bears the risk of loss. However, payment of the balance due is per Humanscale‘s Terms of Payment.

ReTURN AUTHORIZATIONS & ReFUSALSAll returned and non-damaged refused orders are subject to a five percent (5%) restocking fee. Seating and special order returns will not be accepted. Customer must request a Return Authorization through the Humanscale Customer Service Department within 45 days of product receipt to return any product. If Humanscale agrees to restock the product, customer must return it freight prepaid to Humanscale, F.O.B., to the original shipping point or as otherwise instructed by Humanscale Customer Service. If product is returned without a Return Authorization, Humanscale will notify customer of the unauthorized return and customer must provide instructions for its disposition within one week thereafter. Failure of customer to respond within one week will result in Humanscale’s right to dispose of the product with no credit. Return Authorizations expire sixty (60) days after the date of issue. If the returned product is not in resalable condition, customer will not receive credit for the return. Customer must promptly provide a purchase order or other acceptance of fees/credit reduction as required.

WARRANTYTHE FOLLOWING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE.

Humanscale offers the following warranties on its products:

PRODUCT WARRANTY

Customer’s Own Material (COM, COL) No Warranty

CFL Light Bulbs 1 Year, Single-Shift Warranty

Switch Mouse 1 Year, 24/7 Warranty

Artemide Tolomeo Light 2 Years, 24/7 Warranty

Diffrient Light 5 Years, 24/7 Warranty

Fabric/Cushions/Arm Pads 5 Years, Single-Shift Warranty

Element Light, Including Light Source 10 Years, 24/7 Warranty

M4, M7 & M8 Monitor Arms with Gas Cylinder Components

10 Years, 24/7 Warranty

All seating and other products detailed in a current Humanscale Price Guide, unless otherwise specified

15 Years, 24/7 Warranty

All other products NOT detailed in a current Humanscale Price Guide

Varies; consult your Humanscale representative for details

This Warranty is applicable to the initial purchaser only and is non-transferable. If products are procured through authorized Humanscale Dealerships, the end-user customer must be registered with Humanscale for the warranty to be in effect. Humanscale warrants that, at the time of customer’s receipt, the product will be in good working order and will be free from defects in material and workmanship. This Warranty does not apply to normal wear and tear or damage caused by accident, neglect, misuse or improper installation or operation. Humanscale will not be responsible for damage due to service, maintenance, modifications or tampering by anyone other than a Humanscale authorized representative. In the event a product is defective and Humanscale receives written notice of the defect within the Warranty period, Humanscale, at its option, will either repair or replace the defective product. This Warranty does not cover damage caused by a carrier or transportation of the product from one location to another, or alterations made by owner.

LIMITATION OF LIABILITYPurchaser’s remedies set forth herein are exclusive and the liability of Humanscale with respect to the breach of this agreement or any contract entered into between the parties pursuant hereto shall not exceed the price of the product or part on which such liability is based. In no event will Humanscale be liable to purchasers for any special, collateral, incidental or consequential damages however caused, whether by Humanscale’s negligence or otherwise.

The remedies provided above are the purchaser’s sole remedies for anyfailure of Humanscale to comply with its obligations regarding the workmanship of its products. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Humanscale, with respect to or arising out of the product furnished hereunder.

U.S. Headquarters11 East 26th Street8th FloorNew York, NY 10010212 725 4749212 725 7545 fax

Customer Service10 Inverness Drive EastSuite 100Englewood, CO 80112800 400 0625303 858 9912303 858 9916 [email protected]

european Headquarters13 Northburgh StreetLondon EC1V 0JPUnited Kingdom+44 207 566 7990 +44 207 566 7991 fax [email protected]

Our Design Philosophy

At Humanscale, we believe the best designs in the world are based on purpose

and function. If a design solves a functional problem as simply and elegantly as

possible, the resulting form will be honest and timeless.

Recognized by I.D. Magazine as one of the 10 “Best Companies” worldwide that help push design forward.www.humanscale.com

nmso pricing and specification guide - the business linetbl.ca/pdfs/cataloge_government1.pdf ·...

Documents