news letter jan. feb. 2018 news letters/news letter february 2018.pdf · association with any other...
TRANSCRIPT
INDIAN TRANSFORMER MANUFACTURERS ASSOCIATION
NEWSFEBRUARY 2018ISSUE 60
ITMAITMAITMAITMAITMAITMAITMAITMAITMAITMAITMADear Readers,
We are thankful for your support in the activities of ITMA and
hope your patronage will continue for further growth in the
business of transformer and allied industries. Besides, readers,
colleagues and friends are requested to share with us any
News/ report or suggestions they may consider appropriate
for printing in the Newsletter.
B. LAL
(Director General)
35TH ANNUAL GENERAL MEETING (AGM) HELD ON 16TH
FEBRUARY 2018 AT 11.00 A.M. IN ITMA OFFICE, VAISHALI
GHAZIABAD, U.P.
Indian Transformer Manufacturers association (ITMA) had its Annual
General Meeting on 16th February 2018, in which it approved the
nominations to the Executive Council for the years 2018-2020.
OUT GOING PRESIDENTS ADDRESS IN THE ITMA'S
35TH ANNUAL GENERAL MEETING
Shri U.C. Misra, out going President ITMA stated in his address about the
various issues concerning transformer industry which were taken up with
various authorities of Govt. of India, MoP, MoS , Ministry of Heavy Industries
(DHI), Ministry of Commerce and right up to PMO level , besides the other
Govt. Departments viz. CEA, BEE, BIS etc. and discoms/utilities. Workshop
on GST the new tax regime for understanding of the members was also
arranged. More over number of workshops were organized in order to spread
awareness in respect of energy efficient distribution transformers, conservation
of energy, guidelines for certification issued by BIS etc in different parts of the
country. Even International Conference on Transformers (TRAFOSEM-
2017) was organized, the brief details are highlighted here under:
I. Nineteen (19) number of new companies have been admitted for
ITMA Membership for the year 2016-17.
II. Meetings were organized with DG, BIS on 21st December 2015 and
3rd February 2016 with ITMA delegation, on the various issues
cropped up due to BIS certification required as per the Quality Control
Order of DHI, as per the revised guidelines of BIS date 30th
November 2015. Accordingly after detailed discussion in the meetings
BIS issued the amendment to the guidelines on 28th June 2016.
III. To facilitate states in mobilization of quality equipments/material at
competitive prices under DDUGJY/IPDS schemes , two committees
were constituted by MoP on 14-08-15, i) committee 'A' to finalize the
aggregate requirement of the major equipments /materials along with
the technical specifications thereof, ii) Committee 'B' to prepare
bidding documents for carrying out e-tendering and evaluating bids
and to finalize the rate contracts. ITMA as one of the member in
Committee 'A' suggested the amendment/clarifications in the technical
specifications in one of the major high value materials/equipmentsi.e
distribution and power transformers up to 33kv, as per IS:1180 Part
1/2014, finalized by the committee-A,
IV. Meeting convened by ITMA with BIS officers from certification
department CMD-3 along with representatives of test houses i.e. CPRI
and ERDA for its council membersfor resolving the issues of grouping
guidelines for certification and other related issues on 27th May 2016
at ITMA office, vaishali.
V. Relaxation for the date of implementation of the quality control order
on electrical transformers, for confirmed contracts/purchase orders
NEWS
issued after 7th May 2015 and prior to 1st February 2016 by
Discoms/Utilities-The matter was pursued with DHI who agreed and
issued the amendment accordingly.
VI. Import of prime CRGO material in the country is from the major
producers of CRGO who have acquired the BIS licence. Most of these
foreign manufacturers do not sell their material directly to the Indian
customers and have appointed wholly owned subsidiary/company
who is fully authorized to deal with the indian customers-The issue
was taken up by ITMA with MoS/BIS who agreed to accept the
material from the wholly owned subsidiary of the foreign mills under
the quality control order on steel and steel products dated 12th March
2012.
VII. Draft guidelines for repair and maintenance of outdoor power and
distribution transformers, as circulated by BIS, has been re-circulated
to the members for their comments. While no comments received
from members but the matter is still pending consideration with BIS.
VIII. Internal circuit breaker (ICB) in distribution transformers up to 200
KVA rating has been taken up with BIS for including in the IS:1180
(part-l/2014) as an optional accessory /item of the distribution
transformers. Matter still pending with BIS technical committee
ETD-16.
IX. Uniformity of technical specifications of distribution transformers
and power transformer for sub-transmission up to 33 KV system, has
been taken up with MoP & CEA -Matter is still pending with CEA
and being persuaded.
X. Meeting with Shri Piyush Goyal, Honble Union Power Minister on
13th July 2016 at 4.00 P.M with ITMA and other Stake holders on
quality and energy efficient transformers, besides dual certification of
Distribution Transformers.
XI. Constitution of Committee for preparation of standardization
manual for power transformer ( 66 KV to 765 KV) under the
chairmanship of Chairperson CEA. Only two meeting s held, matter
being pursued with CEA.
XII. ITMA's intense follow up with BIS, empanelled the National Test
House, Ghaziabad (NTH) as one of the recognized testing house for
transformers with BIS, besides establishment of testing laboratories
for transformers, in the Eastern region of the country by NTH along
with SCT facilities at Ghaziabad.
XIII. Notification/Regulation/Amendment No.1: S.O .4062 (e) dated
16th December 2016 issued by MoP regarding Up-rating of losses
for BEEs star rated distribution transformer, by making earlier star 4
as star 1 and so on -------- effective from 1st January 2018 .The issue
was strongly taken up with BEE, who extended the date of
implementation upto 1st July 2017 and also issued important
instructions to all distribution transformer manufacturers on 19th
December 2016, for compliance of the MoP's notification dated 16th
December 2017.
XIV. Emergency executive council meeting held on 6th January 2017 at
ITMA's Office, Vaishali, to discuss and resolve the issue of MoP's
notification dated 16th December 2016 i.e. Amendment No. 1 to the
earlier notification dated 12th January 2009, by up rating the energy
efficiency star ratings i.e. earlier star 4 has been made as star 1 & so
on………..As per the deliberation of the council meeting BEE was
requested.
1. To extend the date of implementation by one year
2. To issue calendar for adoption of next higher energy efficient star
rating with clear time of around two years for industry to get ready.
3. To stream live line the procedure of granting label.
XV. Mandatory dual certification from BEE & BIS for energy efficient
distribution transformers as per IS:1180-Request for simplification
of procedure for “ease of doing business” sent to the Hon'ble PM.
XVI. BIS after intense follow up agreed to return the original test reports to
the applicant and keep certified copy for their records of the DTs for
the ratings /varieties of transformers which are covered in the scope of
licence by virtue of grouping guidelines of BIS dated 28th June 2016.
XVII. Registration of the transformer manufacturers for BIS certification of
Distribution Transformers as per IS:1180 part 1/2014 for issue of
licence as per the mandate of quality control order and
implementation of revised STI to IS 1180 part 1/2014 (doc: STI
1180 part-1) 4, October 2016) (incorporating amendment no.1)-
effective from 28th February 2017.
XVIII. ITMA arranged the presentation from Mr. Shashank Singh, ASM,
Busy Infotech Pvt. Ltd for council members –for GST (goods and
services tax) being implemented from 1st July 2017 by Government
of India. In the presentation, council members were apprised about
the various issues and formalities to be completed by the
manufacturers, for which a software developed by the firm (Business
Accounting Software) was discussed.
XIX. For smooth roll out of goods and services tax (GST) a conference of
the stake holders was organized by the GST council to discuss the
rationalization and the applicability of rates on various Goods &
Services, under the chairmanship of Hon'ble MoP(IC) for Power,
Coal, NRE and Mines on 22nd June 2017 at Ashoka Hotel, New
Delhi
XX. Finalization of the losses for Non-preferred rating of DTs as per
IS:1180 Part 1/2014 i.e. 6.3 KVA and 10 KVA was taken up in the
BIS technical committee meeting ETD -16, held on 12th April 2017,
as the losses given in the Amendment No.1 were not found workable.
XXI. CEA constituted a Monitoring committee on distribution
transformers under the Chairmanship of Chief Engineer DP&D with
various stakeholder and associations as member . The Monitoring
Committee is to coordinate with all the agencies to resolve the various
issue being faced by the transformer industry for ease of doing
business. After persuasion with CEA, ITMA has also been included as
one of the members in the committee. The first meeting of the
monitoring committee was held on 22nd August 2017.
XXII. Meeting of ITMA delegation with secretary power on 14-12-2017 to
discuss the issues concerning transformer industry, mainly the
mandatory dual certification on DTs, warranty/guarantee period
asked by discoms in tenders and standardization/ uniformity of
Shri Girish Kumar, MD, Sai Electricals thanked Shri U. C. Misra for
proposing his name for the post of President ITMA for the next term (2018-
2020), and further stated that due to his various pressing engagements and
personal issues, at present, he may not be in a position to devote the
necessary/adequate time required for discharging the function of the
President of the Association. As such he may not be able to take up this
demanding position, for this tenure. However he would be glad to serve the
Association with any other responsibility as deemed fit. Shri Girish Kumar,
further stated that in the present scenario Shri U.C. Misra is the best choice to
continue to the next term (2018-2020) as President, as he is well conversant
with the issues of ITMA to be addressed with the various authorities/
Ministries. The motion was seconded by Shri Surendra Gupta, Marketing
Director of M/s. East India Udyog, Shri Anil Aggarwal, CMD, PME Power
Solutions (India) Ltd. and others with thumping majority.
Shri U.C. Misra thanked the members and stated that as the members have
reposed faith and confidence in me to continue, as a President ITMA for the
next term and heartily accepts the responsibility and assured the members that
due justification would be done to the post and pending issues shall be taken
up with the concerned authorities for their resolutions to the best interest of
the members and industry.
technical specifications of Distribution Transformers & Power
Transformer upto 33KV as per IS: 1180 Part 1/2014 etc.
XXIII. ITMA and ICAI jointly with bureau of Indian Standards Organized
seminars in various major cities, in the country in order to spread the
awareness amongst the stake holders on standards and the mandatory
BIS certification/registration, due to quality control order on
transformers and other related issues to produce and use only quality
energy efficient distribution transformers for the period from
November 2016 to November 2017.
XXIV. 14th International Conference on Transformers (TRAFOSEM-
2017) on “Global Trends in Transformers Technology for Indian
Power System” on 5th May 2017 at Scope Convention Centre
Auditorium, Scope Complex, New Delhi
ELECTION OF THE PRESIDENT
Shri U.C. Misra outgoing President, after his address to the members in
AGM about the works/ issues taken up during his tenure, proposed the name
of Shri Girish Kumar, MD, Sai Electricals, to the post of President ITMA for
the years 2018-2020 which was seconded by Shri Visweswara Reddy of M/s
Shirdi Sai Electricals Ltd and Shri Anil Aggarwal of M/s PME Power
Solutions (India) Ltd. and supported by other members.
Final List of Elected Office Bearers for the Years 2018-2020.
REVIEW OF THE MEETING CONVENED BY SECRETARY
POWER ON 14TH DECEMBER 2017 WITH ITMA
DELEGATION LED BY MR. U.C. MISRA WHEREIN CERTAIN
IMPORTANT ISSUES CONCERNING TRANSFORMER
INDUSTRY AS UNDER WERE DELEBRATED :-
President ITMA informed the house that due to delay in appointment from
Secretary Power, Govt. of India for a meeting with ITMA delegation to
discussing various pending issues, he had to personally call upon Shri. A.K.
Bhalla, Secretary Power to request him for a meeting to thrash out certain
vexed issue of transformer industry. Secretary Power considered the request
and allowed the ITMA delegation for a meeting on 14th December 2017
wherein following issues were discussed:
i) Mandatory dual certification of distribution transformers by BIS and
BEE for the same cause of energy efficient quality distribution
transformers as per IS:1180 (2014)
ii) Uniformity of the technical specifications across the utility/discoms
for procurement of distribution transformers at National level.
iii) Inadequate testing facilities for testing of transformer due to
mandatory certifications
iv) Warranty/guaranty period insisted by the discoms/utilities in the
tender documents is being misused
Secretary Power advised Shri Rajpal, Economic Advisor, MoP to look into
the issues and put up for a resolution to the best interest of the industry.
Accordingly MoP had called a meeting of the stakeholders on 7th February
2018 to discussed one of the above issues i.e. mandatory dual certification of
DTs by BEE and BIS. However due to Budget session the meeting has been
postponed . However ITMA has again requested for convening the meeting,
and the same is now due on 5th March 2018.
AGENDA ITEMS FOR THE NEXT MEETING OF MONITORING
COMMITTEE ON DISTRIBUTION TRANSFORMERS
FORWARDED TO CE (DPD) CEA
President ITMA informed the house that ITMA has forwarded the agenda
items for the meeting to the convened by Chief Engineer, DP&D, CEA, the
Chairperson of the Monitoring committee for DTs and requested to
convening the meeting of the stakeholders at the earliest.
The agenda points forwarded for the meeting are as given here under; in case
any item is required to be taken up in the Monitoring Committee same may
be informed to ITMA secretariat immediately.
a) Small Scale Manufacturers who are only supplying to private
industries, MES do not get bulk orders which puts a very heavy
financial burden on them in having to send every rating of
Distribution Transformers for testing. Thus instead of having to test
every rating manufactured in the first instance, any one Distribution
Transformer from a bulk production of a rating could be selected and
sent for testing.
b) Lack of test facilities in Eastern India creates a hindrance and adds
months to the lead times as well as adds a risk element in case of any
damages or accidents during to and from transportation.
c) The manufacturer for Distribution Transformers of Industrial and
Private Customers do not want to pay for type tests nor are willing to
wait for extra months to enable them to send their transformers to
ERDA or CPRI for testing purposes.
d) The validity of Test certificate issued by CPRI/ERDA should to be
extended for ease of doing business and re-testing should only be
done if there is change in design.
12TH EDITION OF ITMA'S NEW DIRECTORY -2017
We have pleasure to inform that ITMA has compiled and released its New
Directory-2017. The Directory has complete details of telephone/fax
number, e-mail, website, name of contact person & company
production/profile etc., of Power Sector Industry particularly for our
Members/Non-Members (Transformer and its ancillary items
Manufacturers) SEBs, Utilities, GENCOS, TRANSCOS, DISCOMS,
besides it contains names with complete details of all Technocrats, Electrical
Industries, Prominent Consultants, and Suppliers, Financial Institutions, and
Energy Planners, R&D organizations, Central & State Govt.
Undertakings/PSUs and NABL Members, Foreign Mission in India,
Corporate Houses and Others etc.
This publication is priced at 1300/- [including courier charges (i.e. Rs. 300/-)]
which amount you may please remit by Demand Draft/Cheque in the name of
"Indian Transformer Manufacturers Association" payable at Ghaziabad.
The Directory can also be purchased (Cash/Cheque) from the ITMA Office at
Vaishali, Gaziabad, U.P. for Rs. 1000/- Please note that we do not send the
Directory by V.P.P.
ADVERTISEMENT FOR ITMA'S NEWSLETTER.
ITMA is already printing advertisements in the strip form at the bottom of the
each page. Interested firms /companies to give an advertisement in our
forthcoming newsletter, please send the advertisement material in the form of
CD (PDF Format) together with DD/Cheque in favour of “Indian
Transformer Manufacturers Association” payable at Ghaziabad as early as
possible. Our next Newsletter issue is likely to appear shortly and as such
would like your consent for insertion of advertisement for one year i.e. for
12 issues. The advertisement tariff are given below: -
Advertisement Particular Tariff
Single Issue 12 Issue
(one Year)
Front Page Bottom Strip ` 4,000 ` 36,000/-
Back Page Bottom Strip ` 3,000 ` 30,000/-
Two Inner Pages Bottom Strip ` 2,500 Each ` 24,000/-
ADVERTISEMENT SIZE FOR BOTTOM STRIP : 3 CM X 18 CM
MATERIAL CDR / PDF FORMAT
For further information, please approach ITMA secretariat well in advance
and seek information:-
[email protected]/[email protected]
0120-4566119/4116651 (09810616471-MANOJ K.G.)