CMAWA Major Sponsors Jan—June 2019

e-News June 2019

Message from EO

In this edition, I thought it relevant to provide you with a snapshot of our current and loyal members whose on-going support is always greatly appreciated. As a member based Association, the CMAWA relies on the income it receives from membership subscriptions to maintain operations. Putting it quite simply and in our current situation, if our membership levels continue to fall, the future sustainability of the CMAWA would be indeed questionable.

Our membership levels for 2019 currently stand at 34 Suppliers and 124 Cabinet Makers. You will agree, this is well below the potential numbers we could and should have, considering we are a state wide Association. Whilst the Committee and Management are constantly spreading the word on the benefits for partnering with CMAWA, the take up of new members is slow. We do not have a dedicated ‘sales team’ behind the scenes and perhaps this could resolve this issue. However, any expenditure of our member funds needs careful deliberation by the Committee.

In the meantime, you might all be able to assist our cause. The referral incentive, brought in with our new Constitution makes it easy and rewarding for existing members to encourage a new member to join us. Just refer one new member and receive a 25% discount on your annual membership fee. Put forward four new members in any one year, your subsequent annual membership is completely free. It’s not expected to be a time consuming task for you, just refer them to me or our website and I’ll do the rest. Let me know though if you do refer someone for membership so I can make a note.

There are massive benefits if we can increase our membership levels but two important one are:

• Gives CMAWA a louder voice for Advocacy purposes and when negotiating with Government for better and fairly conditions for our Industry—Strength in Numbers

• Gives us a higher potential to secure community or Government funding for CMAWA projects or services. One that comes to mind is raising Consumer awareness and education on the benefits for selecting a CMAWA member.

• Your opinions matter greatly, so if anyone has any further suggestions or ideas on how we can increase our memberships to a more acceptable level, be great to hear from you. Regards Sheila Payne (EO)

Dates for your calendar with

• Apprentice & Traineeship Networking event Wed 19th June 4.30-7.30pm Suite

4, 7 Hector Street West, Osborne Park. Join us with Stan Liaros (CEO ATC) and his

team for an informative evening on all your group training and labour hire needs.

CMAWA member special rates offer.

• Laminex Networking event Thursday 1st August 4pm—6pm Osborne Park

Showrooms Scarborough Beach Road. Join Troy Hawkins Residential Sales

Manager, Jamie Clark Commercial Sales Manager and their teams to see the latest

Laminex ranges over a few drinks with light refreshments

• Annual Golf Day 2019—Friday 25th October Collier Park Golf Course

Registrations open now—come join us for a fun packed day and a great

networking event.

CMAWA Supplier /Associate Members 2019

Supplier Main Contact/s Website

Advanced Architectural Products Nigel Vandersteen aap.net.au

Apollo Risk Services Mark Taylor/Carl King apolloriskservices.com.au

Artia Peter Dobbyn artia.com.au

Benchmark Business Works Pru Cameron benchmarkbusinessworks.com.au

Biesse Australia Martin McCluskey biesse.com.au

Brewer Machinery Malcolm Brewer/Roy Deering brewermachinery.com.au

Cabmaster Software Peter Hutson cabmastersoftware.com.

DMS Spray Solutions Damian Pereira spraysolutions.com.au

eKitchens Adam Smith ekitchens.com.au

Flat Packs WA Brendan Menner flatpackswa.com.au

Gibson Benness Industries Keith Benness gbi.com.au

Gunnersen Pty Ltd Jon Battelley gunnersens.com.au

Hafele Australia Sean Vadala hafele.com.au

Hettich Australia Len Larking hetttich.com.au

Homag Australia Ross Campbell homag.com.au

JH Wilberforce Joe Vecchio jhwilberforce.com.au

Jobman Pty Ltd Aaron Crees jobman.com.au

Laminex Troy Hawkins/Jamie Clark laminex.com.au

Leitz Tooling Systems John Kerr leitz.com.au

Lincoln Sentry Andrew Loughton lincolnsentry.com.au

Matrix Insurance Group Nicholas MacDonald matrixinsurance.net.au

Nessco Simon Ness nessco.com.au

One Click Cabinets Paul Van Rjit occ.direct

Planit Leigh Swalling au.planit.com

Polytec Andrew Jardine polytec.com.au

Premium Surfaces/Premium Stone Mark Sheahan premsolid.com.au

Proform Products Mark Anderson proform.com.au

Tommotek WA Drina Thompson tommotek.com

The Apprentice & Traineeship Co. Chris Liaros/Chris Gray gtsw.com.au

West Coast Panel & Veneer Gary Walton westcoastpv.com.au

Wilson & Bradley Mark Webb wilbrad.com.au

The Kitchen Door Company Adam Smith thekitchendoorcompany.com.au

Woodwest Services Derek De Vos M: 0419 878 100

World Wide Timber Traders Phil Crawley wwtt.com.au

CMAWA South West and Regional Cabinet Maker /Affiliate Members

Albany: Dean Shekell Kitchens Dean Shekell

Busselton:

Busselton Furniture Products Aaron Tucker

Busselton Cabinet Makers David Watts

Geo Cabinets Daniel Bosveld

Esperance:

Esperance Cabinets Ramon Dellaca

Norms Cabinets Julie Wright

Geraldton:

Eddie Thompson & Co Eddie Thompson

Geraldton Building Services & Cabinets Peter Fleay

Jurien Bay: J&R Carters Fine Furniture Jeremy Carter

Kalgoorlie:

JR Turner Cabinets Jeff Turner

Holman Cabinets Ryan Holman

Karratha: Karratha Cabinets Mark Yaksich

Pinjarra: Artra Custom Kitchens & Commercial Tim Drag

Merredin: M&W Kitchens and Cabinets Brad Manning

Narrogin: South East Cabinetmakers Darren Davies

Nungarin: Total Concept Cabinetmaking Nick Malaspina

Webberton: UI Home Improvements Paul Johnson

CMAWA Cabinet Makers Members 2019 Perth Metro and surrounds

Wangara /Landsdale Osborne Park

Academy Custom Interiors Carlino Cabinet Works

Cabinet Impressions Ikal Kitchens

Carpentech Cabinetry Modular Kitchens

Clohessy Cabinets Shepherd Craft Furniture

Commodore Cabinets Statewide Cabinets

Cooleys Cabinets West Coast Cabinets

Custom Style Kitchens

Designtec Commercial Malaga

DCC Group Additional Cabinets

Euro Trend Airport Cabinets

Ital Cabinets Cabinets by Dario

Kitchen Kreations Centurion Cabinets

Master Cabinets Challenge Cabinets

MC Cabinets Imperial Interiors

Perez kitchen Designs Kitchens on Tap

Petgia Cabinets Mor Cabinets

Refined Cabinets Optima Interiors

Samuel Cabinetry Style Side Cabinets

Silverline Cabinets Top Shelf Cabinets

Trufix Cabinets Veeyays Renovations

Wangara Classic Cabinets Westar Cabinets

Gnangara Bayswater

Anthony Johns Cabinets Baywater Cabinets

Benchmark Cabinets

Balcatta Delta Cabinets

Cabinet Network K&C Aubrey

Crown Cabinets & Design Luchs Cabinets

Furniture Design Studio Ned’s Cabinets

Bibra Lake Canning Vale

Arena Interiors Salt Kitchens & Bathrooms

Diverse Interiors Ultimate Design Furnishings

Gerovich Cabinets Willetton Cabinets

Kitchen Solutions Wood & Form Cabinets

South Fremantle Cabinets

Southern Kitchens Armadale

Character Cabinets

Maddington Dema Ktichens

Infinity Cabinetmaking Nathans Cabinets

Wood Workings Australia Western Kitchens

Willetton Forrestdale

Essential Cabinet Works Kanters Cabinets

Infinity Cabinetmaking Master Class Cabinets WA

LC Kitchen & Stone Gingin: Gingin Cabinet Works

O’Connor Neerabup

Ferguson Corporation Blueprint Interiors

G&A Nankiville Creative Cabinets

Professional Innovators Klyde Kitchens & Cabinets

Raw Edge Furniture Northam: Ashman Fine Cabinets

Beaconsfield: Handwerk Belmont: Cabinet Creations

Bullsbrook: JFG Hogan Cabinetmaking Hendersen: Brown Brothers Furniture

Joondalup: Kitchen Craftsmen Jandakot: Newton Cabinets

Kewdale: Stylewoods Commercial Kelmscott: STD Kitchens

Kenwick: Kenwick Cabinet Works Morley: QN Designs

Melville: Absolute Carpentry & Cabinetry Mundaring: Andrew Wall Cabinets

Port Kennedy: Appearance Cabinets Seville Grove: Westgate Kitchens

Subiaco: Subiaco Furniture Factory South Fremantle: Eco Cabinets

Welshpool: Belliss Custom Creations Yanchep: Yanchep Cabinets

Welshpool: LA Cabinets

Rockingham: Mandurah:

Absolute Kitchens Estuary Cabinets

Giltedge Kitchens Merlin Cabinets

Paramount Cabinets The Cabinet Factory

Major Sponsors January to June

Dekton | Silestone Premium Stone currently has a range of seven Dekton colours in

stock and ready to go. We also have Silestone Eternal Calacatta Gold

in stock and on special while stocks last.

Come in to view the full slabs now.

Mark Sheehan

58b Tulloch Way, Canning Vale WA 6155

9456 4055 or mobile 0422 333 934

sales@premstone.com.au http://premstone.com.au

+++++++++++++++++++++++++++++++++++++

Worldwide Timber Traders supply a huge range of timber products and custom

fabricating services. We work closely with industry professionals throughout the lifecy-

cle of their projects, providing them with quality timber products such as Cladding, Tim-

ber Decking, Composite Decking, Veneers, Plywood, Structural Timber & Trusses,

Laminated panels and so much more!

Besides offering a huge range of cash and carry timber products, Worldwide Timber

Traders also works closely with industry professionals throughout the lifecycle of their

custom projects. At Worldwide Timber Traders, we pride ourselves on our great

customer service. Whether you come to visit us at our Bibra Lake shop or make use of

our trucks that are always ready to get your delivery across the state, rest assured, our

professional transport team deliver quality service with a smile!

Phil Crawley - National Sales and Import Manager - 0433 416 002 or 9418 3222

E: phil@wwtt.com.au

www.wwtt.com.au

179 Barrington Street, Bibra Lake WA 6163

Major Sponsors January to June

DMS Spray Solutions is a family owned and operated business based

in Perth Western Australia. We have a dedicated team of experienced

French Polishers and Cabinet Makers who understand the industry and

requirements of its customers. We are recognized for our strong work

ethics, and strive in supplying the right solution of French Polishing needs

to a large range of clients, including large entities as well as the general

public; and can cater for any size job.

We also supply a variety of panel profiles, custom made according to your

measurements for any new installations, providing you with the

convenience of a complete service.

We are proud to introduce a new product which we have been testing for

over a year now, called Paintable Laser Edging. The Paintable Laser Edging is bonded to the edges of flat panels and is designed to be painted onto directly, without priming first, saving time and also reducing the cost of the job. This process is ideal for projects such as Units or Apartments where larger quantities are typically involved, and we can pass on lower rates to our clients.

For our commercial clients...

We offer commercial 2-pac coating application services for Builders, Office

and Retail Shop fit-outs, general office and amenities, for projects of both

a major and minor scale. We can also supply and paint a variety of panel

profiles to give you a complete end to end service.

Our small team of experts will strive to deliver the desired results within

your given time frames with integrity and without compromising on quality.

We are always happy to provide free Quotes and discounts apply for large

quantities of work.

Free pick-up & Delivery is included in the Perth metro area

Director/Owner Damian Pereira M: 0430 148 322

E: admin@spraysolutions.com.au www.spraysolutions.com.au

24 Boulder Road Malaga WA 6090

Awards and information you should know

The Fair Work Commission has increased the national Minimum Wage by 3% effective

from 1 July 2019.The minimum wage increase will have an administrative and financial

impact on the bottom line as it does each year. However this shouldn't be a time to

consider reducing staff numbers or increase product cost.

Being creative with cost savings and identifying new efficiencies can help your business

manage these type of increases. For instance, you may consider to reduce overtime

rates payable by ensuring your employees ordinary hours are within the ordinary span

of hours or rostering provisions outlined in the relevant modern awards. Also, by

ensuring employees receive their meal breaks or required breaks between shifts, the

potential costs of additional loading being payable to staff will be reduced.

The Minimum wage is the absolute lowest that an employee can be paid. The current

minimum in Australia is $740.80 per week which equates to a minimum hourly rate of

$19.49.as set on May 30th 2019.. Under a Modern Award, the wages for each

classification are the lowest possible wage rate. If an employer would like to pay above

this minimum rate, both the employee and employer need to be aware of any increases

to the Award rates when the Fair Work Commission release adjustments.

This is important because as long as the employee is being paid above the award rate,

the employer does not need to increase the employees wats on 1st July because the

base requirement is already being met.

Overtime is usually any work in excess of 38 hours per week and is often paid at a

higher wage. Instead of being paid an overtime rate, an employee may be able to take

time off instead. This is called time in lieu (TOIL)

For more information contact Fair Work Australia, Employsure or CMAWA Executive

Officer on eo@cmawa.com.au

***************************************************************************************************

The Apprentice and Traineeship Company and ATC Employment

Solutions (ATC) is a “not-for-profit” group training and labour hire company providing

services State wide in Western Australia. ATC delivers high quality staffing solutions

across a diverse range of industries, and regardless of your size, we have a reliable

and skilled workforce ready for hire.

With over 30 years’ experience in employment and recruitment we understand workflow

needs. We can provide you with group training and labour hire solutions to suit your

requirements. We employ the apprentices, trainees and labour hire workers and place

them with you. We handle all the paperwork for wages, allowances, workers’

compensation, superannuation, etc.

We are there throughout the period of placement to make sure everything runs

smoothly. We are the extra layer of support for you. We free you up, so you can run

your business! When you take a placement through us, we will:

advertise the position;

interview, reference check and, in relation to apprentices and trainees, aptitude

test;

make recommendations of best candidates;

arrange pre-employment medicals, if required;

ensure the placements have required PPE;

provide inductions;

provide ongoing performance assessments for apprentices and trainees;

be there regularly as a mentor, resolve issues and provide pastoral care to the

apprentices and trainees to ensure they are focused on your business; and

liaise with the relevant registered training organisation regarding their off-the-job

training.

ATC offer a great service at a competitive price

CMAWA Member Discounts apply

Chris Gray, Field Officer c.gray@gtsw.com.au

Mobile: 0419 930 657 or 08 9204 4566

Suite 4, 7 Hector Street West, Osborne Park WA

7 Hector Street West Osborne Park WA 6017 wwww.gtsw.com.au