TM

Laminated Glass

SentryGlas ®Using DuPont TM Ionoplast Interlayer

Using DuPont TMTechnologyDigitally-Printed PVB Interlayer

SentryGlas ® EXPRESSIONS TM

One Gateway Boulevard, Pedricktown, NJ 08067Toll Free: (800) 257-7827 • Fax: (856) 299-4344www.jeberkowitz.com • info@jeberkowitz.com

Taking Glass Fabrication to the Next Level

* Acoustical Values from GANA Laminated Glazing Reference Manual 2009 Edition test data; results are not guaranteed. Make-ups and values should only be used as a guide.• LAG = Laminated Architectural Glass, two symmetrical lites of glass laminated with PVB.• STC (Sound Transmission Class) - The average of the sound transmission losses between the frequencies of 125Hz and 4,000Hz.• OITC (Outdoor-Indoor Transmission Class) - The standard used for indicating the rate of transmission of sound between outdoor and indoor spaces in a structure; it is based on ASTM E1332.• JEB FusionTM Laminated Glass conforms to ASTM C1172 Standards.• JEB Recommends using a minimum of .060 interlayer for laminates with heat-treated glass or a component lite of 3/8” or thicker.• Sizes Subject to Review; consult customer service for make-up limitations.• Available in Annealed, Heat-Strengthened, Tempered and Heat Soaked

JEB FusionTM Acoustical Rating Charts

3/10

Monolithic JEB FusionTM Laminated Glass

Nominal Thickness

Laminate Make-UpGlass Ply - PVB - Glass Ply STC OITC

1/4” (monolithic) 31 291/4” 1/8” - .030 - 1/8” 34 305/16” 1/8” - .030 - 1/8” 35 315/16” 1/8” - .090 - 1/8” 35 323/8” 3/16” - .030 - 3/16” 36 337/16” 3/16” - .060 - 3/16” 36 327/16” 3/16” - .090 - 3/16” 35 32

1/2” (monolithic) 36 331/2” 1/4” - .030 - 1/4” 37 339/16” 1/4” - .060 - 1/4” 37 333/4” 3/8” - .030 - 3/8” 40 341” 1/2” - .030 - 1/2” 42 35

Insulating Glass Units with JEB FusionTM Laminated Glass

Thickness Glass Ply Air Space Glass Ply STC OITC1” (no laminate) 1/4” [1/2”] 1/4” 35 28

1” 1/4” [1/2”] 1/4” LAG .030 39 301” 1/4” LAG .030 [1/2”] 1/4” LAG .030 42 35

1 1/8” 1/4” LAG .060 [1/2”] 1/4” LAG .060 41 331 3/16” 1/4” LAG .030 [1/2”] 1/4” LAG .030 40 351 1/4” 7/16” LAG .030 [1/2”] 7/16” LAG .030 40 331 1/2” 1/2” LAG .030 [1/2”] 1/2” LAG .030 41 351 5/8” 1/2” LAG .060 [1/2”] 1/2” LAG .060 42 361 5/16" 1/4" [1/2”] 9/16” LAG .060 41 33

Monolithic & Insulated Glass Units with SentryGlas® Interlayers

Thickness Glass Ply – Interlayer / Airspace – Glass Ply STC OITC

9/16” lami 1/4” – .060 SGP – 1/4” 35 329/16” lami 1/4” – .035 SGP – 1/4” 35 331 5/16” IG 1/4” – [1/2"] 9/16” LAG .060 39 331 5/16” IG 1/4” – [1/2"] 1/2” LAG .035 39 331 3/16” IG 1/4” – [1/2”] 7/16” LAG .060 38 321 3/16” IG 1/4” – [1/2”] 3/8” LAG .035 38 32

Points of Reference4” Brick Wall 45 406” Solid Concrete Masonry Unit (C.M.U.) 50 44