new quantec functions and enhancements available july 2010
DESCRIPTION
NEW QUANTEC FUNCTIONS AND ENHANCEMENTS Available July 2010. USER ID. Allows infrared transmitters and neck pendants to be programmed with a unique User ID (1 to 255) and a 16 character custom name - PowerPoint PPT PresentationTRANSCRIPT
NEW QUANTEC FUNCTIONS AND ENHANCEMENTSAvailable July 2010
Allows infrared transmitters and neck pendants to be programmed with a unique User ID (1 to 255) and a 16 character custom name
User ID information shown on all relevant displays (Attack > Nurse Smith). Alternatively, the system can be set up so User ID is logged in Surveyor only
USER ID
Can be used to highlight staff training issues (i.e. too many attacks on one person may indicate an aggressive member of staff)
Initial programming requires a QT423 configurator (authorised users can update names at a Quantec controller)
Allows a number of other new Quantec functions to be implemented…..
Allows Quantec to ‘track’ the course of an Attack generated via an infrared staff attack transmitter with User ID
Quantec analyses the transmitter’s ID and only shows the last activated receiving device (i.e. the current location of the attack) on Displays
A full record of the attack, showing all activated receivers and the order in which they were triggered, is logged in Surveyor (can be used as evidence in courts, etc).
ATTACK TRACK FUNCTION
Allows nursing/security staff entering rooms to log their Attendance via IR call points/ceiling receivers
Call points momentarily flash to indicate a registered call (Attendance calls will NOT show on displays but will be logged in Surveyor)
If programmed with a User ID, managers can monitor which staff are performing their duties (helps prevent staff sleeping on the job, etc)
STAFF ATTENDANCE PENDANT
Typical transmitting range = 10m line-of-sight (IR) and 60m (RF)
Replaceable 12V 8LR50 battery provides 6-12 months operation (battery low indication provided in Surveyor if User ID is used)
Can be reconfigured to generate a Standard, Presence/Reset toggle, Help Required or Reset call using a QT423 configurator.
Allows patients to remotely trigger Standard calls via IR call points/ceiling receivers and radio receivers
Ideal for individual bedrooms and/or communal areas such as lounges and gardens
Can be programmed with a User ID and custom name so staff can see which patient is calling
PATIENT NECK PENDANT
Typical transmitting range = 10m line-of-sight (IR) and 60m (RF)
Includes an anti-ligature lanyard and confidence LED for call confirmation and battery low indication (battery low indication also provided in Surveyor if User ID is used)
Can be reconfigured to generate a Presence/Reset toggle, Help Required or Reset call using a QT423 configurator.
Allows slave devices such as ceiling pulls in bathrooms or shower rooms to generate a distinct ‘Ensuite’ call level
Ensuite calls are flagged at the same call level as Help Required calls
Ensuite devices must be connected to an appropriately programmed slave connector on a new-style Quantec call point…
ENSUITE CALL LEVEL
Now have programmable ‘CALL’ buttons, ‘RESET’ buttons, remote sockets (if fitted) and two programmable slave inputs
CALL buttons, remote sockets and slave inputs can be programmed via a QT432 configurator to generate specific call levels (standard, ensuite, help required, emergency or attack)
PROGRAMMABLE CALL POINTS
For example, a call point’s ‘CALL’ button can be set to make an Emergency call on its initial activation, a slave ceiling pull can make an Ensuite call, a slave panic button can make an Attack call and a tail call lead can make a Help Required call, or any other combination
RESET buttons can also now be programmed so they bypass the Presence call level.
CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK
QUANTEC NETWORK
INITIAL PRESS =CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK
OPTIONALREMOVALOF PRESENCE
CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK
x3
CALL, HELP REQUIRED EMERGENCY, ATTACK, PRESENCE, RESET OR ATTENDANCE(VIA TRANSMITTER)
x3
CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK
x3
QUANTEC NETWORK
CALL, HELP REQUIRED EMERGENCY, ATTACK, PRESENCE, RESET OR ATTENDANCE(VIA TRANSMITTER)
x3
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK
x3
Allows engineers (or authorised users) to assign a custom site name of up to 16 characters to Quantec displays
Names can be programmed into the system via the QT707 programming software or at a Quantec Controller
CUSTOM-SITE NAME
Quantec’s call messages can now be routed depending on:-
• Area of origin (26 options/cap codes)
• Type of call (6 options/cap codes, including Presence and Reset)
• Day/night (2 options/cap codes).
MORE ADVANCED PAGING
Paging displays will show the location of the call, the level of the call and (if relevant) the User’s ID
An optional re-paging function is also available
Cap code set up is via the QT707 Programming tools
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
A new feature allowing call messages to be directed to third-party DECT telephone systems
Compatible with MEP (Multitone) or ESPA protocols
Output options are as per Quantec’s updated paging functions.
DECT capability can be added to existing Quantec systems by updating the Quantec Controller
Programming is via the QT707 Programming tools
Multitone can advise on compatibility/interfacing issues
DECT CAPABILITY
QuickTime™ and aTIFF (Uncompressed) decompressor
are needed to see this picture.
Can now be interfaced and take data from up to four Quantec controllers via 4 serial ports. (All controllers must be located within 30m of each other).
Now logs user ID data, Attendance calls and transmitters/pendants with low batteries.
IMPROVED SURVEYOR SOFTWARE
Corridor Displays now include a slightly louder buzzer (plus a link allowing the buzzer to be disabled).
Call points with call follower sounders can now be programmed so their beepers operate in day mode/locally and night mode/globally.
Master IR Receivers now have a programmable slave input (for the optional connection of slave panic buttons, etc)
OTHER ENHANCEMENTS
PRODUCT
MODIFICATIONS
CONTROLLERModified to support• User ID• DECT/Pager enhancements• Custom site name• Ensuite calls• Attendance
CALL POINTSModified to support• Programmable functions• Additional slave input• IR User ID• IR Low battery• IR Attendance• IR Presence toggle
MASTER IRModified to support• IR User ID• IR Low battery• IR Attendance• IR Presence toggle• Additional slave input
DISPLAYModified to support• Custom site name • User ID• Beeper disable• Ensuite Call level
BIG DISPLAY INTERFACEModified to support• Custom site name• User ID• Ensuite Call level
ATTACK TRANSMITTERModified to support• User ID• Attendance
QuickTime™ and aTIFF (LZW) decompressor
are needed to see this picture.
RADIO RECEIVERModified to support• User ID• Attendance• Low battery
PROGRAMMING TOOLSModified to support• Custom site name• User ID• Ensuite Call level• DECT/Pager support• Buzzer disable• Presence in night mode
CONFIGURATOR TOOLSModified to support• User ID• Attendance
SURVEYORModified to support• User ID• Attendance• Low battery• Data from up to four controllers